Online Examination System Project report

~Page no i ~
Online Quiz Examination System
A Project Report Submitted
in Partial Fulfillment of the Requirements
for the Degree of
Bachelor of Technology
by
SARASWATENDRA SINGH
1303210844
ABES Engineering College, Ghaziabad
(Department of Computer Science & Engineering)
Dr. ABDUL KALAM TECHNICAL UNIVERSITY
LUCKNOW
September,2016

~Page no I ~
ACKNOWLEDGEMENT
I hereby declare that the work presented in this Mini project
report entitled, “Online Quiz Examination System” in partial fulfilment
for the Degree of “Bachelor of Technology” in Computer Science &
Engineering. Our extreme gratitude to Mr. Abhishek Sharma who
guided us throughout the project. Without his willing disposition, spirit
of accommodation,frankness, timely clarification and above all faith in
us, this project could not have been completed in due time.

~Page no II ~
ABSTRACT
Online Quiz Examination System is web based application for
technical evaluation. Online Quiz Examination System not only replace
paperwork but also releases the workload offaculty. It fulfills the
requirements of the institutes to conduct the exams online. Students
can give exam without the need of going to any physical destination. They
can view the result at the same time.Thus the purpose of the site is to
provide a system that saves the efforts and time of Faculty.

~Page no IV ~
CONTENTS
Acknowledgement I
Abstract II
Certificate III
Chapter 1. Introduction 01
1.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01
1.2 Scope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01
1.3 Taxonomy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02
1.4 Existing System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02
1.5 Disadvantage of existing System. . . . . . . . . . . . . . . . . . 02
1.6 Objective of proposed system . . . . . . . . . . . . . . . . . . . . 03
Chapter 2: Software Requirement Specification 04
2.1 Proposed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04
2.2 Scope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04
2.3 Specific Requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . 05
2.4 User Requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05
2.4 Constrain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06
2.5 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06
Chapter 3: ER Digram 07
Chapter 4: Testing And Validation 08
4.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08
4.2 Design of Test Case. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08
4.3 Validation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.4 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Chapter 5: Screen Shots 11

~Page no 1 ~
INTRODUCTION
1.1 Introduction
Online Quiz Examination System is a Multiple Choice Questions
(MCQ) based examination system. It provides an easy to use environment
for both Test Conductors and Students appearing for Examination. The
main objective of Online Quiz Examination System is to provide all the
features that an Examination System must have, with the "interfaces that
don't Scare it's Users!".
1.2 Scope
 The main purpose of the system is to efficiently evaluate the
candidate thoroughly through a fully automated system that not only
saves a lot of time but also gives fast results and saves paper.
 It is a cost-effective and popular means of mass- evaluation system.
 The faculty prepares the tests and questions for each exam.
 The candidates can login through the client computers with
their roll number given to them and can take the exam.
 The questions are shuffled in a random order so that possibilities for
getting questions in the same order for the students who are beside,
is very less.
Chapter : 1

~Page no 2 ~
1.3 Taxonomy of OLES
Users of this System are classified into three categories:
 Administrators
 Faculty
 Students
1.3.1 Administrators
Administrators are responsible for management of system
users, Faculty Registration,Discard Student etc.
1.3.2 Faculty
Test conductors are responsible for preparing questions and
create a test and student retest etc.
1.3.3 Students
Students are the candidates , appearing for the Exam.
1.4 Existing system
The Existing system of conducting examination process is manual.
Existing system is a large man power process and is difficult to
implement it at different platform. It has so many problems. So we
introduce a OLES system, which is fully computerized. Existing system
is a large man power process and is difficult to implement.
1.5 Disadvantages of existing system
 The existing systems are very time consuming.
 It is difficult to analyze the exam manually.
 Results are not precise as calculation and evaluations are done
anually.
 Result processing after summation of exam takes more time
as it is done manually.

~Page no 3 ~
1.6 Objective of proposed system
 Economic feasibility
 Time Flexibility
 Technical feasibility
 User-friendly interface
 Eco-Friendly System

~Page no 4 ~
Software Requirement Specification
2.1 Proposed
The main objective of the Online Examination System is
that it helps educational institutions and corporate world to
conduct exams to any number of candidates at a time, in an
automated manner. It reduces the time consumption and workload
that exist in the current system of examination. It also helps in
storing the record of each examination and the results are alsostored
in the system. This makes the searching of the records easier than
the existing system.
2.2 Scope
 OLES can be used in educational institutions as well as in
corporate world.
 The system handles all the operations and generatesreports as
soon as the test is completed which saves the precious time of
faculties spent on reviewing answer sheets.
 OLES is a cost-effective and popular means of mass- evaluation
system.
 The administrator of the system prepares the tests and questions
for each exam.
 The candidates can login through the client computers with
their Admission number given to them by the College and can
take the exam.
Chapter : 2

~Page no 5 ~
 The questions are shuffled in a random order so that
possibilities for getting questions in the same order for the
students who are sitting beside is very less.
 Can be used anywhere any time as it is a web based application.
2.3 Specific requirements
2.3.1 Software requirement
• Operating System
 Windows XP and others.
• Front End
 Bootstrap
• Back End
 MySQL
• Browser
 Internet Explorer and others.
2.3.2 Hardware Requirement
Client Side:
 Browser
Any Browser
 Processor :
Pentium 2.0 and above.
 RAM :
256 MB
Server Side:
 Processor :
Pentium and above.
 RAM :
512 MB
 Hard disk space :
4GB
2.4 User Requirements
Every user should be:
 Comfortably work with computer.
 He must also have basic knowledge of English.

~Page no 6 ~
2.5 Constraints:
 Graphical user interface is only in English.
 Enrolment ID and password is used for identification of user
and there is no facility for guest.
 Only registered users will be authorized to use theservices.
 Limited to HTTP or HTTPS.
 This system is working for single server.
2.6 Conclusion
In this phase, we understand the software requirement
specifications for the system.We arrange all the required
components to develop the project in this phase itself so that we will
have a clear idea regarding the requirements before designing the
project. Thus we will proceed to the design phase followed by the
implementation phase of the project.

~Page no 7 ~
ER Digram
Chapter : 3

~Page no 8 ~
Testing And Validation
4.1 Introduction
Software testing is a critical element of software quality
assurance and represents the ultimate review of specification, design and
coding. In fact, testing is the one step in the software engineering process
that could be viewed as destructive rather than constructive.
A strategy for software testing integrates software test case
design methods into a well-planned series of steps that result in the
successful construction of software.
Testing is the set of activities that can be planned in advance
and conducted systematically. The underlying motivation of program
testing is to affirm software quality with methods that can economically
and effectively apply to both strategic to both large and small-scale
systems.
The following are the Testing Objectives:
• Testing is a process of executing a program with the intent of
finding an error
• A good test has a high probability of finding an asyet undiscovered
error.
• A successful test is one that uncovers an as yet undiscovered error.
4.2 Design of test cases &scenario
The objective is to design tests that systematically uncover different
classes of errors and do so with a minimum amount of time and
effort. Testing cannot show the absence of defects, it can only show that
software defects are present.
Chapter : 4

~Page no 9 ~
4.2.1 Integration Testing
Modules integrated by moving down the program design
hierarchy. Can use depth first or breadth first top down integration
verifies major control and decision points early in design process.
Top-level structure testedmost. Depth first implementation allows a
complete function to be implemented, tested and demonstrated
and does depth first implementation of critical functions early. Top
down integration forced (to some extent) by some development
tools in programs with graphical user interfaces. Begin construction
and testing with atomic modules (lowest level modules).Bottom
up integration testing as its name implies begins construction and
testing with atomic modules. Because modules are integrated from
the bottom up, processing required for modules subordinate to a
given level is always available and the need for stubs is
eliminated.
4.2.2 Validation Testing
Validation testing is aims to demonstrate that the
software functions in a manner that can be reasonably expected by
the customer. This tests conformance the software to the Software
Requirements Specification.
4.2.3 Alpha and Beta Testing
Alpha testing
It’s a acceptance testing conducted by the developed
environment.
Beta Testing
It’s a acceptance testing conducted by the multiplecustomers
in the customer environment.

~Page no 10 ~
4.2.4 System Testing
Software is only one component of a system. Software will
be incorporated with other system components and system
integration and validation test performance.
4.3 Validation
Validation aims to demonstrate that the software functions in
a manner that can be reasonably expected by the user. An
experiment has done for checking the consistency for the user
requirements regarding the username and password which should be
validated through the server and the username and password
should be matched.
4.4 Conclusion
In this way we also completed the testing phase of the
project and ensured that the system is ready to go live. Thus we
developed a system that provides a paperless examination.

~Page no 11 ~
Screen Shots
Chapter : 5

Online Examination System Project report

More Related Content

What's hot (20)

Viewers also liked (15)

Similar to Online Examination System Project report (20)

Recently uploaded (20)

Online Examination System Project report