Optimization technique

D Nagesh Kumar, IISc Optimization Methods: M1L41
Introduction and Basic Concepts
Classical and
Advanced Techniques
for Optimization

Classical Optimization Techniques
The classical optimization techniques are useful in finding the optimum
solution or unconstrained maxima or minima of continuous and differentiable
functions.
These are analytical methods and make use of differential calculus in locating
the optimum solution.
The classical methods have limited scope in practical applications as some of
them involve objective functions which are not continuous and/or
differentiable.
Yet, the study of these classical techniques of optimization form a basis for
developing most of the numerical techniques that have evolved into advanced
techniques more suitable to today’s practical problems

Classical Optimization Techniques
(contd.)
These methods assume that the function is differentiable twice with respect to the
design variables and the derivatives are continuous.
Three main types of problems can be handled by the classical optimization
techniques:
– single variable functions
– multivariable functions with no constraints,
– multivariable functions with both equality and inequality constraints. In problems with
equality constraints the Lagrange multiplier method can be used. If the problem has
inequality constraints, the Kuhn-Tucker conditions can be used to identify the optimum
solution.
These methods lead to a set of nonlinear simultaneous equations that may be
difficult to solve. These methods of optimization are discussed in Module 2.

Numerical Methods of Optimization
Linear programming: studies the case in which the objective function
f is linear and the set A is specified using only linear equalities and
inequalities. (A is the design variable space)
Integer programming: studies linear programs in which some or all
variables are constrained to take on integer values.
Quadratic programming: allows the objective function to have
quadratic terms, while the set A must be specified with linear equalities
and inequalities
Nonlinear programming: studies the general case in which the
objective function or the constraints or both contain nonlinear parts.

Numerical Methods of Optimization
(contd.)
• Stochastic programming: studies the case in which some of the
constraints depend on random variables.
• Dynamic programming: studies the case in which the optimization
strategy is based on splitting the problem into smaller sub-problems.
• Combinatorial optimization: is concerned with problems where the
set of feasible solutions is discrete or can be reduced to a discrete
one.
• Infinite-dimensional optimization: studies the case when the set of
feasible solutions is a subset of an infinite-dimensional space, such as
a space of functions.
• Constraint satisfaction: studies the case in which the objective
function f is constant (this is used in artificial intelligence, particularly in
automated reasoning).

Advanced Optimization Techniques
Hill climbing: it is a graph search algorithm where the current path is
extended with a successor node which is closer to the solution than
the end of the current path.
In simple hill climbing, the first closer node is chosen whereas in
steepest ascent hill climbing all successors are compared and the
closest to the solution is chosen. Both forms fail if there is no closer
node. This may happen if there are local maxima in the search space
which are not solutions.
Hill climbing is used widely in artificial intelligence fields, for reaching a
goal state from a starting node. Choice of next node/ starting node can
be varied to give a number of related algorithms.

Simulated annealing
The name and inspiration come from annealing process in
metallurgy, a technique involving heating and controlled cooling of a
material to increase the size of its crystals and reduce their defects.
– The heat causes the atoms to become unstuck from their initial positions
(a local minimum of the internal energy) and wander randomly through
states of higher energy;
– the slow cooling gives them more chances of finding configurations with
lower internal energy than the initial one.
In the simulated annealing method, each point of the search space
is compared to a state of some physical system, and the function to
be minimized is interpreted as the internal energy of the system in
that state. Therefore the goal is to bring the system, from an arbitrary
initial state, to a state with the minimum possible energy.

Genetic algorithms
A genetic algorithm (GA) is a local search technique used to
find approximate solutions to optimization and search problems.
Genetic algorithms are a particular class of evolutionary
algorithms that use techniques inspired by evolutionary biology
such as inheritance, mutation, selection, and crossover (also
called recombination).

Genetic algorithms (contd.)
Genetic algorithms are typically implemented as a computer
simulation, in which a population of abstract representations (called
chromosomes) of candidate solutions (called individuals) to an
optimization problem, evolves toward better solutions.
The evolution starts from a population of completely random
individuals and occurs in generations.
In each generation, the fitness of the whole population is evaluated,
multiple individuals are stochastically selected from the current
population (based on their fitness), and modified (mutated or
recombined) to form a new population.
The new population is then used in the next iteration of the algorithm.

Ant colony optimization
In the real world, ants (initially) wander randomly, and upon finding food return
to their colony while laying down pheromone trails. If other ants find such a
path, they are likely not to keep traveling at random, but instead follow the trail
laid by earlier ants, returning and reinforcing it if they eventually find food
Over time, however, the pheromone trail starts to evaporate, thus reducing its
attractive strength. The more time it takes for an ant to travel down the path
and back again, the more time the pheromones have to evaporate.
A short path, by comparison, gets marched over faster, and thus the
pheromone density remains high
Pheromone evaporation has also the advantage of avoiding the convergence to
a locally optimal solution. If there were no evaporation at all, the paths chosen
by the first ants would tend to be excessively attractive to the following ones. In
that case, the exploration of the solution space would be constrained.

Ant colony optimization (contd.)
Thus, when one ant finds a good (short) path from the colony to a food source,
other ants are more likely to follow that path, and such positive feedback
eventually leaves all the ants following a single path.
The idea of the ant colony algorithm is to mimic this behavior with "simulated
ants" walking around the search space representing the problem to be solved.
Ant colony optimization algorithms have been used to produce near-optimal
solutions to the traveling salesman problem.
They have an advantage over simulated annealing and genetic algorithm
approaches when the graph may change dynamically. The ant colony algorithm
can be run continuously and can adapt to changes in real time.
This is of interest in network routing and urban transportation systems.

Thank You

Optimization technique

More Related Content

What's hot (20)

Similar to Optimization technique (20)

Recently uploaded (20)

Optimization technique