OR_Hamdy_taha.ppt

Mjdah Al Shehri
Hamdy A. Taha, Operations Research: An
introduction, 8th Edition
Chapter 2:
Modeling with Linear Programming &
sensitivity analysis
1

Hamdy A. Taha, Operations Research: An introduction, Prentice Hall 2
LINEAR PROGRAMMING (LP)
-In mathematics, linear programming (LP) is a technique for
optimization of a linear objective function, subject to linear
equality and linear inequality constraints.
-Linear programming determines the way to achieve the best
outcome (such as maximum profit or lowest cost) in a given
mathematical model and given some list of requirements
represented as linear equations.
2

Mathematical formulation of Linear
Programming model:
Step 1
- Study the given situation
- Find the key decision to be made
- Identify the decision variables of the problem
Step 2
- Formulate the objective function to be optimized
Step 3
- Formulate the constraints of the problem
Step 4
- Add non-negativity restrictions or constraints
The objective function , the set of constraints and the non-negativity
restrictions together form an LP model.
3

TWO-VARIABLE LP MODEL
EXAMPLE:
“ THE GALAXY INDUSTRY PRODUCTION”
• Galaxy manufactures two toy models:
– Space Ray.
– Zapper.
• Resources are limited to
– 1200 pounds of special plastic.
– 40 hours of production time per week.
4

• Marketing requirement
– Total production cannot exceed 800 dozens.
– Number of dozens of Space Rays cannot exceed number of
dozens of Zappers by more than 450.
• Technological input
– Space Rays requires 2 pounds of plastic and
3 minutes of labor per dozen.
– Zappers requires 1 pound of plastic and
4 minutes of labor per dozen.
5

• Current production plan calls for:
– Producing as much as possible of the more profitable product,
Space Ray ($8 profit per dozen).
– Use resources left over to produce Zappers ($5 profit
per dozen).
• The current production plan consists of:
Space Rays = 550 dozens
Zapper = 100 dozens
Profit = 4900 dollars per week
6

Management is seeking a
production schedule that will
increase the company’s profit.
7

8
A Linear Programming Model
can provide an intelligent
solution to this problem

SOLUTION
• Decisions variables:
– X1 = Production level of Space Rays (in dozens per week).
– X2 = Production level of Zappers (in dozens per week).
• Objective Function:
– Weekly profit, to be maximized
9

The Linear Programming Model
Max 8X1 + 5X2 (Weekly profit)
subject to
2X1 + 1X2 < = 1200 (Plastic)
3X1 + 4X2 < = 2400 (Production Time)
X1 + X2 < = 800 (Total production)
X1 - X2 < = 450 (Mix)
Xj> = 0, j = 1,2 (Nonnegativity)
10

Feasible Solutions for Linear
Programs
• The set of all points that satisfy all the constraints of the model is
called
11
FEASIBLE REGION

Using a graphical presentation we can represent all the constraints,
the objective function, and the three types of feasible points.
12

13
1200
600
The Plastic constraint
Feasible
The plastic constraint:
2X1+X2<=1200
X2
Infeasible
Production
Time
3X1+4X2<=2400
Total production constraint:
X1+X2<=800
600
800
Production mix
constraint:
X1-X2<=450
X1

14
Solving Graphically for an
Optimal Solution

15
600
800
1200
400 600 800
X2
X1
We now demonstrate the search for an optimal solution
Start at some arbitrary profit, say profit = $2,000...
Profit = $
000
2,
Then increase the profit, if possible...
3,
4,
...and continue until it becomes infeasib
Profit =$5040

16
600
800
1200
400 600 800
X2
X1
Let’s take a closer look
at the optimal point
Feasible
region
Feasible
region
Infeasible

17
1200
600
Feasible
2X1+X2<=1200
X2
Infeasible
Production
Time
3X1+4X2<=2400
X1+X2<=800
600
800
Production mix
constraint:
X1-X2<=450
X1
A (0,600)
E (0,0)
B (480,240)
C (550,100)
D (450,0)

• To determine the value for X1 and X2 at the optimal
point, the two equations of the binding constraint
must be solved.
18

Production mix
constraint:
X1-X2<=450
19
2X1+X2<=1200
Production
Time
3X1+4X2<=2400
2X1+X2=1200
3X1+4X2=2400
X1= 480
X2= 240
2X1+X2=1200
X1-X2=450
X1= 550
X2= 100

By Compensation on :
Max 8X1 + 5X2
The maximum profit (5040) will be by producing:
Space Rays = 480 dozens, Zappers = 240 dozens
20
(X1, X2) Objective fn
(0,0) 0
(450,0) 3600
(480,240) 5040
(550,100) 4900
(0,600) 3000

Type of feasible points
• Interior point: satisfies all constraint but non with
equality.
• Boundary points: satisfies all constraints, at least one
with equality
• Extreme point: satisfies all constraints, two with
equality.
21

22
1200
600
2X1+X2<=1200
X2
Infeasible
Production
Time
3X1+4X2
<=2400
X1+X2<=800
600
800
Production mix
constraint:
X1-X2<=450
X1
(200, 200)
*
Interior
point
(300,0)
*
Boundary
point
(550,100)
*
Extreme
point

• If a linear programming has an optimal solution , an
extreme point is optimal.
23

Summery of graphical solution procedure
1- graph constraint to find the feasible point
2- set objective function equal to an arbitrary value so that line
passes through the feasible region.
3- move the objective function line parallel to itself until it
touches the last point of the feasible region .
4- solve for X1 and X2 by solving the two equation that intersect
to determine this point
5- substitute these value into objective function to determine its
optimal solution. 24

MORE EXAMPLE
25

Example 2.1-1
(The Reddy Mikks Company)
- Reddy Mikks produces both interior and exterior paints from two raw materials
M1 and M2
Tons of raw material per ton of
Exterior paint Interior paint Maximum daily
availability (tons)
Raw material M1 6 4 24
Raw material M2 1 2 6________
Profit per ton ($1000) 5 4
-Daily demand for interior paint cannot exceed that of exterior paint by more
than 1 ton
-Maximum daily demand of interior paint is 2 tons
-Reddy Mikks wants to determine the optimum product mix of interior and
exterior paints that maximizes the total daily profit 26

Solution:
Let x1 = tons produced daily of exterior paint
x2 = tons produced daily of interior paint
Let z represent the total daily profit (in thousands of dollars)
Objective:
Maximize z = 5 x1 + 4 x2
(Usage of a raw material by both paints) < (Maximum raw material
availability)
Usage of raw material M1 per day = 6x1 + 4x2 tons
Usage of raw material M2 per day = 1x1 + 2x2 tons
- daily availability of raw material M1 is 24 tons
- daily availability of raw material M2 is 6 tons 27

Restrictions:
6x1 + 4x2 < 24 (raw material M1)
x1 + 2x2 < 6 (raw material M2)
- Difference between daily demand of interior (x2) and exterior
(x1) paints does not exceed 1 ton,
so x2 - x1 < 1
- Maximum daily demand of interior paint is 2 tons,
so x2 < 2
- Variables x1 and x2 cannot assume negative values,
so x1 > 0 , x2 > 0
28

Complete Reddy Mikks model:
Maximize z = 5 x1 + 4 x2 (total daily profit)
subject to
6x1 + 4x2 < 24 (raw material M1)
x1 + 2x2 < 6 (raw material M2)
x2 - x1 < 1
x2 < 2
x1 > 0
x2 > 0
- Objective and the constraints are all linear functions in this
example.
29

30
Properties of the LP model:
Linearity implies that the LP must satisfy three basic properties:
1) Proportionality:
- contribution of each decision variable in both the objective
function and constraints to be directly proportional to the
value of the variable
2) Additivity:
- total contribution of all the variables in the objective function
and in the constraints to be the direct sum of the individual
contributions of each variable
3) Certainty:
- All the objective and constraint coefficients of the LP model are
deterministic (known constants)
- LP coefficients are average-value approximations of the probabilistic
distributions
- If standard deviations of these distributions are sufficiently small , then the
approximation is acceptable
- Large standard deviations can be accounted for directly by using stochastic LP
algorithms or indirectly by applying sensitivity analysis to the optimum solution

Example 2.1-2
(Problem Mix Model)
- Two machines X and Y
- X is designed for 5-ounce bottles
- Y is designed for 10-ounce bottles
- X can also produce 10-ounce bottles with some loss of
efficiency
- Y can also produce 5-ounce bottles with some loss of
efficiency
31

32
Machine 5-ounce bottles 10-ounce bottles
X 80/min 30/min
Y 40/min 50/min
- X and Y machines can run 8 hours per day for 5 days a
week
- Profit on 5-ounce bottle is 20 paise
- Profit on 10-ounce bottle is 30 paise
- Weekly production of the drink cannot exceed 500,000
ounces
- Market can utilize 30,000 (5-ounce) bottles and 8000 (10-
ounce) bottles per week
- To maximize the profit

33
Solution:
Let x1 = number of 5-ounce bottles to be produced per week
x2 = number of 10-ounce bottles to be produced per week
Objective:
Maximize profit z = Rs (0.20x1 + 0.30x2)
Constraints:
- Time constraint on machine X,
(x1/80) + (x2/30) < 8 X 60 X 5 = 2400 minutes
- Time constraint on machine Y,
(x1/40) + (x2/50) < 8 X 60 X 5 = 2400 minutes
- Weekly production of the drink cannot exceed 500,000 ounces,
5x1 + 10x2 < 500,000 ounces
- Market demand per week,
x1 > 30,000 (5-ounce bottles)
x2 > 8,000 (10-ounce bottles)

34
Example 2.1-3
(Production Allocation Model)
- Two types of products A and B
- Profit of Rs.4 on type A
- Profit of Rs.5 on type B
- Both A and B are produced by X and Y machines
Machine Machine
Products X Y
A 2 minutes 3 minutes
B 2 minutes 2 minutes
- Machine X is available for maximum 5 hours and 30 minutes during any
working day
- Machine Y is available for maximum 8 hours during any working day
- Formulate the problem as a LP problem.

35
Solution:
Let x1 = number of products of type A
x2 = number of products of type B
Objective:
- Profit of Rs.4 on type A , therefore 4x1 will be the profit on selling x1 units of type A
- Profit of Rs.5 on type B, therefore 5x2 will be the profit on selling x2 units of type B
Total profit,
z = 4x1 + 5x2
Constraints:
- Time constraint on machine X,
2x1 + 2x2 < 330 minutes
- Time constraint on machine Y,
3x1 + 2x2 < 480 minutes
- Non-negativity restrictions are,
x1 > 0 and x2 > 0

36
Complete LP model is,
Maximize z = 4x1 + 5x2
subject to
2x1 + 2x2 < 330 minutes
3x1 + 2x2 < 480 minutes
x1 > 0
x2 > 0

37
2.2 GRAPHICAL LP SOLUTION
The graphical procedure includes two steps:
1) Determination of the feasible solution space.
2) Determination of the optimum solution from
among all the feasible points in the solution
space.

38
2.2.1 Solution of a Maximization model
Example 2.2-1 (Reddy Mikks model)
Step 1:
1) Determination of the feasible solution space:
- Find the coordinates for all the 6 equations of the
restrictions (only take the equality sign)
6x1 + 4x2 < 24
x1 + 2x2 < 6
x2 - x1 < 1
x2 < 2
x1 > 0
x2 > 0
1
2
3
4
5
6

39
- Change all equations to equality signs
6x1 + 4x2 = 24
x1 + 2x2 = 6
x2 - x1 = 1
x2 = 2
x1 = 0
x2 = 0
1
2
3
4
5
6

40
- Plot graphs of x1 = 0 and x2 = 0
- Plot graph of 6x1 + 4x2 = 24 by using
the coordinates of the equation
- Plot graph of x1 + 2x2 = 6 by using
- Plot graph of x2 - x1 = 1 by using
- Plot graph of x2 = 2 by using

42
- Now include the inequality of all the 6 equations
- Inequality divides the (x1, x2) plane into two half spaces , one on
each side of the graphed line
- Only one of these two halves satisfies the inequality
- To determine the correct side , choose (0,0) as a reference point
- If (0,0) coordinate satisfies the inequality, then the side in which
(0,0) coordinate lies is the feasible half-space , otherwise the
other side is
- If the graph line happens to pass through the origin (0,0) , then
any other point can be used to find the feasible half-space

43
Step 2:
2) Determination of the optimum solution from among
all the feasible points in the solution space:
- After finding out all the feasible half-spaces of all
the 6 equations, feasible space is obtained by the
line segments joining all the corner points A, B, C,
D ,E and F
- Any point within or on the boundary of the
solution space ABCDEF is feasible as it satisfies all
the constraints
- Feasible space ABCDEF consists of infinite number
of feasible points

44
- To find optimum solution identify the direction in which the
maximum profit increases , that is z = 5x1 + 4x2
- Assign random increasing values to z , z = 10 and z = 15
5x1 + 4x2 = 10
5x1 + 4x2 = 15
- Plot graphs of above two equations
- Thus in this way the optimum solution occurs at corner point C which is the
point in the solution space
- Any further increase in z that is beyond corner point C will put points
outside the boundaries of ABCDEF feasible space
- Values of x1 and x2 associated with optimum corner point C are
determined by solving the equations and
6x1 + 4x2 = 24
x1 + 2x2 = 6
- x1 = 3 and x2 = 1.5 with z = 5 X 3 + 4 X 1.5 = 21
- So daily product mix of 3 tons of exterior paint and 1.5 tons of interior paint
produces the daily profit of $21,000 .
1
2
1 2

46
- Important characteristic of the optimum LP solution is that it is always
associated with a corner point of the solution space (where two lines
intersect)
- This is even true if the objective function happens to be
parallel to a constraint
- For example if the objective function is,
z = 6x1 + 4x2
- The above equation is parallel to constraint of equation
- So optimum occurs at either corner point B or corner point
C when parallel
- Actually any point on the line segment BC will be an
alternative optimum
- Line segment BC is totally defined by the corner points
B and C
1

47
- Since optimum LP solution is always associated with a corner point of
the solution space, so optimum solution can be found by enumerating all
the corner points as below:-
______________Corner point (x1,x2) z_________________
A (0,0) 0
B (4,0) 20
C (3,1.5) 21 (optimum solution)
D (2,2) 18
E (1,2) 13
F (0,1) 4
- As number of constraints and variables increases , the number of corner
points also increases

48
2.2.2 Solution of a Minimization model
Example 2.2-3
- Firm or industry has two bottling plants
- One plant located at Coimbatore and other plant located at
Chennai
- Each plant produces three types of drinks Coca-cola , Fanta
and Thumps-up

49
Number of bottles produced per day
by plant at
Coimbatore Chennai______________________
Coca-cola 15,000 15,000
Fanta 30,000 10,000
Thumps-up 20,000 50,000_______________________
Cost per day 600 400
(in any unit)
- Market survey indicates that during the month of April there will be a demand of 200,000
bottles of Coca-cola , 400,000 bottles of Fanta , and 440,000 bottles of Thumps-up
- For how many days each plant be run in April so as to minimize the production cost ,
while still meeting the market demand?

50
Solution:
Let x1 = number of days to produce all the three types of bottles by plant
at Coimbatore
x2 = number of days to produce all the three types of bottles by plant
at Chennai
Objective:
Minimize z = 600 x1 + 400 x2
Constraint:
15,000 x1 + 15,000 x2 > 200,000
30,000 x1 + 10,000 x2 > 400,000
20,000 x1 + 50,000 x2 > 440,000
x1 > 0
x2 > 0
1
2
3
4
5

52
Corner points (x1,x2) z = 600 x1 + 400 x2
A (0, 40) 16000
B (12,4) 8800
C (22,0) 13200
- In 12 days all the three types of bottles (Coca-cola, Fanta, Thumps-up)
are produced by plant at Coimbatore
- In 4 days all the three types of bottles (Coca-cola, Fanta, Thumps-up)
are produced by plant at Chennai
- So minimum production cost is 8800 units to meet the market demand of
all the three types of bottles (Coca-cola, Fanta, Thumps-up) to be
produced in April

Sensitivity Analysis
53

The Role of Sensitivity Analysis of the
Optimal Solution
• Is the optimal solution sensitive to changes in input
parameters?
The effective of this change is known as “sensitivity”
54

Sensitivity Analysis of Objective Function
Coefficients.
• Range of Optimality
– The optimal solution will remain unchanged as long as
• An objective function coefficient lies within its range of optimality
• There are no changes in any other input parameters.
55

56
600
800
1200
400 600 800
X2
X1
The effects of changes in an objective function coefficient
on the optimal solution

57
600
800
1200
400 600 800
X2
X1
The effects of changes in an objective function coefficients
on the optimal solution
Range of
optimality

• It could be find the range of optimality for an
objectives function coefficient by determining the
range of values that gives a slope of the objective
function line between the slopes of the binding
constraints.
58

• The binding constraints are:
2X1 + X2 = 1200
3X1 + 4X2 = 2400
The slopes are: -2/1, and -3/4 respectively.
59

• To find range optimality for Space Rays, and
coefficient per dozen Zappers is C2= 5
Thus the slope of the objective function line can be
expressed as
–C1/5
60

• Range of optimality for C1 is found by sloving the
following for C1:
-2/1 ≤ -C1/5 ≤ -3/4
3.75 ≤ C1≤ 10
61

• Range optimality for Zapper, and coefficient per
dozen space rays is C1= 8
Thus the slope of the objective function line can be
expressed as
–8/C2
62

• Range of optimality for C2 is found by sloving the
following for C2:
-2/1 ≤ -8/C2 ≤ -3/4
4 ≤ C2≤ 10.667
63

64
WINQSB Input Data for
the Galaxy Industries
Problem

65

66

67

68

69

70

71

72

73

74

75

OR_Hamdy_taha.ppt

More Related Content

Similar to OR_Hamdy_taha.ppt (20)

Recently uploaded (20)

OR_Hamdy_taha.ppt