Outdoor LED Billboard IPC --- function introduction
- 1. LED display wireless networking program One:WiFi/ X86 computer architecture, wireless way for the Bluetooth /3G (similar to Internet cafes in the wired way to change the way) Two: IPC LED hardware appearance and profile (detailed internal structure and operating instructions see IPC LED manual) 1.appearance diagram 2.LED IPC brief introduction: LED-6698C IPC •Supported operating systems DOS/WIN98/WIN2000/WINXP/XPE/WINCE/LIUNX •Support paly high-definition and standard definition file. •Support the seventh generation, the eighth generation of sending card, built-in sending card, do not need to DVI video card, so send card only need external DVI line single Ethernet port. •Can be set to the Internet, supports remote control. •Can achieve more than one computer control panel, a screen, can also be multiple computers control playlists usb plug which support the background dual-core CPU notebook hard disk 500 G or 1.8 G SSD solid-state drives (shock) aluminum alloy shell, Material is
- 2. qualitative light, convenient and fixed. Energy conservation and environmental protection, work only about 30 w power of the IPC. •SIZE：410*210*60MM •Working Temperature：-20°-80° • CE certification Three：LED IPC software requirement Customer special remote publishing system, peanut shells or LED studio in the remote control Four:Wireless networking system structure LED display screen01 LED display screen02 LED display screen25 LED display screen26 LED IPC01 LED IPC13 ADSL（Wifi/bluetooth/3G） server TeamViewer Remote control scheme 1. The accused end (IPC) install TeamViewer software: (please note that the red box as picture)
- 3. 2.installed Open software on the left shows the ID and password for this machine was charged with ID password: (please note that the content of the red box as picture)
- 4. 3.In your notebook or office computer also install TeamViewer software, and later want to remote control of industrial computer ID on the right input connection successfully enter the password: (please note that the content of the red box as picture) 4. After the connection is successful to enter industrial computer desktop (support remote transfer file)
- 5. GO tomyCould Remote control scheme 1.Respectively in the main control (self laptop or office computer) and was accused of (IPC) on installed software
- 6. 2.Respectively on the main control end and accused end with the same account login (Each was charged with client can setting note name 3.In the main end optional remote any charged end
- 7. 4.The remote screen legend
- 8. USB The wireless card installation and the interface ONE. Select and open the USB network card model correct drive folder (TL - Windows 7 _Win722N) (AS picture) TWO.Installed in the folder two driver package (QSS installation package, Setup installation) Three.
- 9. Installed to check the driver whether it is right, the right mouse button in turn desktop "my computer" "management" - "device manager". The TP-link network card is the USB wireless network card. Four. Here is connected to the Internet here:
- 11. The ultimate decoder interface Below the interface for the ultimate decoder setting, the decoder can support most of the file format, for better decoder. When using LED ShowT9 or other video players need to install the decoder or other decoder, so that supports multiple video formats. Usually,after installation the "ultimate decoder" without doing any Settings, but if meet some video cannot support, can adjust the options If encounter LEDSHOWT9 cannot play the DVD files, or MPEG format file, please follow below set Mpeg2 decoder to "disable" can solve the problem.
- 12. LED-6698C power on booting/timing boot Settings One. power on booting： 1.Restart your computer, press the DEL key (as far as possible according to the up and down or so key above the DEL key,) into the BIOS 2.Into the Blos choice（Advanced)options.choice the second column (Super IO Configuration Super IO Configuration) enter.
- 13. 3.Select the second (Restore AC Power Loss) enter-- the popup menu select Power On 4.Choice（Power on)
- 14. Press F10 save exit note：a.（Power on) This status on illegal blackout and normal shutdown after electricity will start automatically (No matter what happens on the electricity turned on) b.（Power off)This state under any circumstances not switched on automatically c.（Last State)This state after shutdown of electricity will not start automatically, illegal cut off the power will start automatically. Two.Timing boot 1.Enter the Blos choice (Chipser chipset) press enter 2.Select the third item (Restore On RTC Alarm timing boot Settings) after press enter choose (enabled ,activation, open).
- 15. 4. Pop-up timing boot setting options. RTC Alarm date (Days) (booting date：can choice-31 days,Everyday） Wake up hour (booting hour：can choice 0-24,24-hours） Wake up minete (booting minutes：can choice 0-59） Wake up second(booting second:can choice 0-59）