![The generators in which shunt field winding is in parallel with both
series field and armature winding as shown in figure.
Long Shunt Compound DC Generator
14
Shunt field current, Ish=V/Rsh
Armature current, Ia= series field current,
Isc= IL + Ish
Voltage across the load, V=Eg -Ia Ra-Isc Rsc
=Eg-Ia (Ra + Rsc)
[∴Ia= Ics]
Power generated, Pg= Eg × Ia
Power delivered to the load, PL=V×IL](https://image.slidesharecdn.com/patelrajalkumarhasmukhbhai2130904-170402095939-240607140631-40fbb30c/85/patelrajalkumarhasmukhbhai2130904-170402095939-ppt-14-320.jpg)
patelrajalkumarhasmukhbhai2130904-170402095939.ppt
- 1. DC Machine And Transformer(2130904) Active Learning Assignment on Types of DC Generator Prepared By: Patel RajalKumar H. Guided By : Prof. Hitesh T. Mannai Gandhinagar Institute of Technology Electrical Department Batch-B3
- 2. Types of DC Generator Field Excitation Sepretly Exited Self Exited Series Generator Shunt Generator Compound Generator Permanent Magnet 2
- 3. These are the generators whose field magnets are energized by some external dc source such as Battery. Separately Excited DC Generator 3 Ia = Armature current IL = Load current V = Terminal voltage Eg = Generated emf Voltage drop in the armature = Ia × Ra (R/sub>a is the armature Resistance) Let, Ia = IL = I (say) Then, Voltage across the load, V = IRa Power generated, Pg = Eg×I Power delivered to the external load, PL = V×I.
- 4. These are the generators whose field magnets are energized by the current supplied by themselves. In these type of machines field coils are internally connected with the armature. Due to residual magnetism some flux is always present in the poles. When the armature is rotated some emf is induced. Hence some induced current is produced. This small current flows through the field coil as well as the load and thereby strengthening the pole flux. Self Exited DC Generator 4
- 5. As the pole flux strengthened, it will produce more armature emf, which cause further increase of current through the field. This increased field current further raises armature emf and this cumulative phenomenon continues until the excitation reaches to the rated value. 5
- 6. According To The Position Of The Field Coil DC Generator Has A Three Type 1) Series Generator 2) Shunt Generator 3) Compound Generator 6
- 7. Series Generator In these type of generators, the field windings are connected in series with armature conductors. So, whole current flows through the field coils as well as the load. As series field winding carries full load current it is designed with relatively few turns of thick wire. The Electrical resistance of series field winding is therefore very low (nearly 0.5Ω ). 7
- 8. 8 Let, Rsc = Series winding resistance Isc = Current flowing through the series field Ra = Armature Resistance Ia = Armature current IL =Load current V = Terminal voltage Eg = Generated emf Then, Ia = Isc = IL=I (say) Voltage across the load, V = Eg -I(Ia × Ra) Power generated, Pg = Eg×I Power delivered to the load, PL = V×I
- 9. Shunt Generator In these type of generators, the field windings are connected in Parallel with armature conductors. In shunt generators the voltage in the field winding is same as the voltage across the terminal. Here armature current Ia is dividing in two parts, one is shunt field current Ish and another is load current IL. So, Ia= Ish + IL The effective power across the load will be maximum when IL will be maximum. So, it is required to keep shunt field current as small as possible. For this purpose the resistance of the shunt field winding generally kept high (100 Ω) and large no of turns are used for the desired emf. 9
- 10. 10 Let, Rsh = Shunt winding Resistance Ish = Current flowing through the shunt field Ra = Armature Resistance Ia = Armature current IL = Load current V = Terminal voltage Eg = Generated emf Shunt field current, Ish = V/Rsh Voltage across the load, V = Eg-Ia Ra Power generated, Pg= Eg × Ia Power delivered to the load, PL = V×IL
- 11. Compound DC Generator In series wound generators, the output voltage is directly proportional with load current. In shunt wound generators, output voltage is inversely proportional with load current. A combination of these two types of generators can overcome the disadvantages of both. This combination of windings is called compound wound DC generator. Compound wound generators have both series field winding and shunt field winding. One winding is placed in series with the armature and the other is placed in parallel with the armature. 11
- 12. Compound Generator Has A two Type 1) Short Shunt 2) Long shunt 12
- 13. The generators in which only shunt field winding is in parallel with the armature winding as shown in figure. Short Shunt DC compound Generator 13 Series field current, Isc = IL Shunt field current, Ish = (V + Isc Rsc)/Rsh Armature current, Ia = Ish + IL Voltage across the load, V = Eg - Ia Ra - Isc Rsc Power generated, Pg = Eg × Ia Power delivered to the load, PL=V×IL
- 14. The generators in which shunt field winding is in parallel with both series field and armature winding as shown in figure. Long Shunt Compound DC Generator 14 Shunt field current, Ish=V/Rsh Armature current, Ia= series field current, Isc= IL + Ish Voltage across the load, V=Eg -Ia Ra-Isc Rsc =Eg-Ia (Ra + Rsc) [∴Ia= Ics] Power generated, Pg= Eg × Ia Power delivered to the load, PL=V×IL
- 15. In a compound generator, the shunt field is stronger than the series field. When the series field assists the shunt field, generator is said to be commutatively compound generator. On the other hand if series field opposes the shunt field, the generator is said to be differentially compound generator. 15
- 16. 16