Pet & Preform Testing Instruments

Pacorr Testing Instruments Pvt. Ltd
PET & Preform Testing Instruments

TOP LOAD TESTER- COMPUTERIZED
The PET bottles are often transported by stacking them upon each other. This might cause
the bottle in the bottom row to buckle, compress and deform. The manufacturers need to
test the amount of load that the bottles can bear when they are put under compressive
forces. The Top Load Tester- Digital is the instrument that gives an exact test result for the
buckling capacity of the bottles or PET containers.
TECHNICAL DATA
 Model: PCTLTC-1
 Load Capacity: 0- 100 Kgf.
 Used to measure buckling strength.
 Compression Plates size: Diameter 150 mm or as per sample.
 Speed: Variable (5 to 200 mm /min or as per required)
 Speed variation through Frequency drive make.
 Microprocessor based LCD load indicator: Accuracy of ±
0.05% of load indicated & Resolution of 0.1 kg.
 Peak load hold Indication.
 Auto stop at preset point of Load (Kgs) or compressive travel
(mm).
 Limit switches for protection of cross head travel
 Operation for test from Machine with For, Rev and Stop switch
on machine and also, from PC software.
 Microprocessor based load indicator: Accuracy Of +/- 0.05% of load indicated.
 Results can be evaluated in Kg, Newton & Pound.
 Over load excess compression protection provided
 Over Voltage protection.
 Versatile software with Repeat test and comparison of test results, Average result
display.
 Excel sheet conversion of data and graph.
 Auto selection of all values on graph with modification option.
 Software Key and CD will be provided with machine.
 RS 232 interface with WINDOW based software to conduct test and keep record of
data with graph for the test and calculated results of Compressive Load and
compression in mm
 Heavy duty frame structure
 Compression display: Least count of 0.1 mm through Proximity / encoder switch.
 Table top Model.
 Paint: Powder Coating.
 Power: 220V AC, 50Hz.
 Computer/ Laptop: Client Scope.

TOP LOAD TESTER- DIGITAL
The PET bottles are often transported by stacking them upon each other. This might cause
the bottle in the bottom row to buckle, compress and deform. The manufacturers need to
test the amount of load that the bottles can bear when they are put under compressive
forces. The Top Load Tester- Digital is the instrument that gives an exact test result for the
buckling capacity of the bottles or PET containers.
TECHNICAL DATA
 Model: PCTLSC-1
 Load Capacity: 0- 100 Kgf.
 Used to measure buckling strength.
 Compression Plates size: 140mm x 120mm
 Speed: Variable (20mm/min to 200 mm /min or as per
required)
 Speed variation through Frequency drive make.
 Microprocessor based LCD load indicator: Accuracy of ± 0.05%
of load indicated & Resolution of 0.1 kg.
 Peak load hold Indication.
 Limit switches for protection of cross head travel
 Operation for test from Machine with For, Rev and Stop switch
on machine.
 Microprocessor based load indicator: Accuracy Of +/- 0.05% of load indicated.
 Results can be evaluated in Kgf.
 Over load excess compression protection provided.
 Over Voltage protection.
 Heavy duty frame structure
 Compression display: Least count of 0.1 mm.
 Table top Model.
 Paint: Powder Coating.
 Power: 220V AC, 50Hz.

HOT WIRE BOTTLE CUTTER
The hotwire bottle cutter is an extremely used testing instrument which is used for cutting
the PET bottle so that the section weight of each section of the bottle could be analyzed
properly. This helps the manufacturers in ensuring that the bottles do not trip when they
are being used. The instrument cuts the bottles with such a precision that the section
weight analysis and quality assurance of the bottle can be done accurately.
TECHNICAL DATA
 Model: PCHWBC-1
 No. of Sections cut: 3 (Top, Cylinder &Bottom)
 Display: Digital
 Heat Controller Panel : Controlled variably
through Port
 Wire Materials: Kanthal Element wire
 Power Supply Required : 220V, Single phase, 50
Hz
 No. of wires: 2
 Diameter of Bottle: As per standard
 Heating levels: 3 (Low, Medium, High)
 Heat Monitoring: Digital Display
Features:
 Also known as section weight cutter.
 A cost effective and efficient way of cutting sections of a PET bottle.
 Best for accurate section weight analysis.
 Strong clamping holder for zero slip gripping support
 Digital Display of heating for accuracy and repeatability
 Rapid heat up of wires for sample cutting
 Precise measurement of test sample section weight analysis
 Length, Width adjustable clamping mechanism to hold different size of bottles
 Inbuilt with cutting wire tension adjustment
 Strong and rugged base plate
 Available3-wire configuration also
 Adjustable fixture to test different size of bottles

VACUUM LEAK TESTER- DELUXE
Pacorr Vacuum Leak Tester is used to determine the leakage in packaging materials that
are mostly used in industries must be intact and leak proof. This is why the manufacturers
need to test the integrity and intactness of the packaging materials they are manufacturing
or using for their products. The vacuum leak tester uses heavy vacuum to detect any
leakage or holes in the packaging materials and gives the accurate test results about the
integrity of the specimen. The instrument has a digital display that gives the exact reading
of the test parameters for better precision.
TECHNICAL DATA
 Model: PCVLT-1
 Vacuum Range: 150 – 600mm-Hg
 Vacuum Pressure Gauge: Analogue
 Display: Digital LED
 Desiccator: 12” (Diameter-300mm)
 Least Count: 1.0 mm Hg
 Keyboard: Soft Touch Keys
 Power: 220 V, Single Phase, 50 Hz
 Hold Time: Upto 999 Seconds
 Material: Mild Steel duly powder coated
 Power: 230 V AC, 50 Hz.
 Weight 14Kgs.
Accessories:
 Main Apparatus along with vacuum pump
 Polycarbonate desiccator along with connecting cable.
 User Manual

VACUUM LEAK TESTER- DIGITAL
Pacorr Vacuum Leak Tester is used to determine the leakage in packaging materials that
are mostly used in industries must be intact and leak proof. This is why the manufacturers
need to test the integrity and intactness of the packaging materials they are manufacturing
or using for their products. The vacuum leak tester uses heavy vacuum to detect any
leakage or holes in the packaging materials and gives the accurate test results about the
integrity of the specimen. The instrument has a digital display that gives the exact reading
of the test parameters for better precision.
TECHNICAL DETAILS:
 Microprocessor based Fully Automatic Instrument
 Vacuum Range: 150 - 600 mm- Hg
 Desiccator: 12” (300mm Diameter)
 Display: Alphanumeric LCD with Backlit
 Keyboard: Soft Touch Membrane Keys
 USB Port: For Dot Matrix Printer with parallel interface
 Vacuum Pressure Gauge: Digital
 Vacuum and Hold time: Programmable
 Hold Time: Upto 999 Seconds
 Automatic Last result storage
 Construction of cabinet: Stainless Steel
 Power: 230V AC, 50 Hz
 Weight: 13 Kg (Approx.)
Accessories:
 Main apparatus along with vacuum pump.
 Polycarbonate desiccator along with connecting cable
 User manual
 Printer: Client Scope

CARBONATION ASSEMBLY
Pacorr Carbonation assembly is a very widely used testing instrument in the PET and
Bottle industries. This equipment is mainly intended for testing and measuring the
temperature of the drinks in the bottle as well as the bottle itself. It helps in testing the
efficiency of the bottle in holding the drinks placed in them. The temperature is measured
with the help of an analogue thermometer which is placed inside the bottle by piercing
through a needle.
TECHNICAL DATA
 Model: PCCA-1
 Scale : 0 TO 60 Psi (0 to 4.2 kg/sq. cm)
 Digital Thermometer Range : Upto 300°C
 Pressure Gauge : Analogue
 The main body is coated with high-quality corrosion
resistant plating.
 The machine is a strong structure offering a lightweight
portability.
 Accurate Dial gauges are equipped for recording the
pressure
 Digitalized Thermometer inserted using a piercing
needle for accurate temperature analysis.
 Rapid guiding mechanism with strong locking clips
 Single handed operation with Spherical Indenter for
hassle-free operation.
 Highly accurate test results under advanced controls.
GV SHAKER
Pacorr G V Shaker is a mechanical and motorized testing instrument used to automate the
shaking of bottle specimens to stimulate the carbon dioxide, present in the test specimen.
To perform the test procedure, the test sample is placed in the carbonation assembly and
placed on the Bottle shaker. The testing instrument comprises of an adjustable bottle
shaker to evade bottle slippage at the time of shaking. The device is fabricated with the
stainless steel material. It is easy to use a device which easily
accommodates a bottle of standard size on the instrument.
TECHNICAL DATA
 Model: PCGVS-1
 Type of Model: Table Top
 Control: Manual
 Timer: Digital Preset Timer up to 999 seconds ( Minute
option on request)
 Adjustable and satisfactory platform to clutch the bottle
and to evade bottle slippage.
 The machine is designed completely with stainless steel.
 Auto stop feature to on completion of the test cycle.

TORQUE TESTER- DIGITAL
Pacorr Torque Tester- Digital is the instrument that helps in calculation of the force that
is required to open the cap of the PET bottles. The instrument comes with a digital display
that gives the accurate results of the force applied on the bottle caps during the test. With
this test, the manufacturers can rest assured that the bottles they are manufacturing have
the optimum cap tightness and the bottles are efficient enough to save the products inside
them from spilling.
TECHNICAL DATA
 Model: PCTTD-1
 Capacities: 5 Nm & 10 Nm
 Accuracy: 0.5% of FSD
 Display: LCD with backlit
 Sample diameter range: Ф20-200 mm
 Power Supply: 230 V AC
Features:
 20-200mm diameter bottles/ Jars can be tested
 Available units Lbs-Inch, N-m & Kg-cm
 Peak Hold Facility
 Can measure clockwise and anti-clockwise torque value
 Tare Facility
 Facility to set upper and lower torque limits.
ILLUMINATED MAGNIFIER
Pacorr illuminated magnifier is mainly used of online inspection of products. The
magnifier comes with an LED illuminated strip which makes it easy for the users to locate
nay anomaly or defect in the products which are not visible through naked eye. The
illumines that are used in the magnifier are known to give stable and smooth white light
which makes it even easier to inspect the products.
TECHNICAL DATA
 Model: PCM-1
 Magnification: 5X
 Lens Used: Imported Convex Lens
 Light Used: White CFL
 Changeable viewing angle and height of light.

POLARISCOPE STRAIN VIEWER- DLX
Pacorr Polariscope, a highly efficient strain viewer that helps the manufacturers in testing the
quality and transparency of the products so that best quality assurance could be ensured to the
customers. The working of the Polariscope is based on the principle that any change in refractive
index is due to different strain distribution and this leads to lower transparency of the material.
TECHNICAL DATA
 Model: PCPSV
 Viewing Area: 250 * 250 mm
 Power: 220V, Single phase, 50 Hz
 Lights: CFL Light, Sodium Light
 The Polariscope strain viewer-Dlx offers very easy operation.
 Two light intensity offered: Monochromatic light and Sodium Lamp.
 Sharper and clearer optical viewing experience.
 Large Viewing glass area.
COLOUR MATCHING CABINET
Colour matching cabinet is a very extensively used testing instrument to match the colours
of different products under different lighting conditions. This instrument is used in many
different industries such as textile industries, food industries, paint industries etc. The
instrument is a closed cabinet with different light sources installed in it. The specimen is
placed under different lights at an angle of 450 along with the reference standard.
TECHNICAL DATA
 Model: PCCMC-1
 The equipment is fitted with FIVE Light Sources as per
CIE International Standards:
 D – 65 – Artificial daylight.
 TFL Light-Tungsten Filament.
 TL – 84 Light-Point of Sale
 UVB Light-Ultra Violet
 CWF Light-Cool white fluorescent
 Angle of viewing booth – 45 degree
 Viewing Booth Material – Wood or Steel
 Time Totalizer – Upto 99999.9 hours
 Pacorr color matching cabinet is manufactured strictly
as per ASTM standards.

IMPACT TESTER- GLASS BOTTLES
The Impact tester for glass bottles is specifically designed to test the impact resistance of
the glass bottles. The instrument uses the freely falling weights to apply force on the
specimen and then the force is determined which is required for a glass bottle to reach
failure or breaking point. The instrument can used different combinations of free falling
weights to determine the breaking points of glasses with different attributes. The results of
the test are displayed on a digital display.
TECHNICAL DATA
 Model: PCIRTG-1
 Indenter: Anti-friction needle bearing with correct alignment and
minimum inertia.
 Force: lbs/inch
 Backstop: Steel backstop along with changeable positioning guide.
 Impact level is adjustable over a range of 0 to 22 inch-pounds
available energy
 Angle: 0 to 120 Degree
 Maximum Impact Energy: 2.35 Nw/m
 Impact Weights: 2 weights - 2.6Nw/m, 2.35Nw/m
 Height: Adjustable height for bottle
 A light-weight instrument with a rigid suspension that holds
everlastingly associated pendulum assembly.
 Head of the impact tester is designed to enhance the impact load
applied to the container.
 Crank & Screw of the instrument offers rapid, reproducible, and accurate height
adjustments.
 An optional anvil spacer of small diameter is provided with the machine.
 Standard: DIN 52295-2010

BOTTLE BURST TESTER- ANALOGUE
Pacorr Bottle Burst Tester is used to measure bursting strength of Plastic and PET bottles
through pneumatic pressure.
It consist of chamber with Bottle neck holder, Neck holder can be customized as per the
client’s specifications, a very thick Polycarbonate sheet is placed on the door to view the
test with proper safety.
Operation:
 A bottle is filled with a filled with water, clamped using a
neck holder with mechanical locking arrangement.
 Operator will set the timer.
 Push button is pressed to start the operation.
 Pressuring nozzle is moved down to bottle neck by
pneumatic cylinder.
 Opening of Solenoid valve to apply the pneumatic pressure
over bottle.
 System will stop automatically on achieving the target
(Preset time).
Technical Specifications:
 Model: PCBBTA-1
 Bottle/ Container: 28mm PCO PET Bottle
 Max. Bottle Diameter: 200mm
 Max. Height of Bottle: 400mm
 Max. Capacity: 3 Litres
 Pressure Gauge Output: Analogue
 Inlet Air Pressure: 0-12 Bar/ 175psi
 Power Supply: 230 V AC, Single Phase
 Robust design ensures the good quality and reliability of
product.
 Specifications can be customized as per client’s requirement.

CAPS/ CLOSURES PULL OUT TESTER
Pacorr Cap Pullout testeris used to determine the maximum pull-out strength which is
required to pull out the cap of the bottles. It is an important principle used to ensure the
quality and the strength of the cap of the bottles. The instrument is widely used by the
manufacturers in PET & Preform industries and packaging industries to test the strength of
the caps or corks of the bottles to make sure that the cap on the bottles is fixed correctly.
To avoid the leakage of the bottles, it is mandatory to perform cap pull out strength on the
bottles. Pacorr offers a high quality of Cap Pull Out tester to perform this test efficiently.
TECHNICAL DATA
 Model: PCCPOUT
 Capacity: 100 Kg
 Least Count of the machine: 10 grams
 Operating Motor Requirements– ¼ HP Single
Phase 220 / 110 V AC Supply
 Display of Test Results: Digital (LED)
 Accuracy/Tolerance: ± 2% of Full scale
Features:
 Advanced load sensor is sensing through advanced electronics.
 Highly sensitive load sensor with linearity feature and repeatability
 Single column rugged structure
 Safety limit switches for over travel safety
 Hardened lead screws for frictionless movement
 High accurate micro-controller based system controls
 Peak Hold facility available
 Bright LED display
 Immediate analysis of results after test with complete accuracy & precision.

DROP TESTER
Pacorr drop tester is used for determination of effect of dropping on transport packages.
This test helps to determine the ability of the packages and packing material placed inside
them for cushioning to provide protection to its contents and to measure the ability of the
container to withstand rough handling.
In this test the package to be tested is placed on a frame having two swayable doors. The
height of the frame is adjusted to the desired value. The doors are opened suddenly, the
package is dropped on to a steel platform, and the extent of damage caused evaluated.
PACORR Drop Tester for transport packages consists of a dropping mechanism and a heavy
fabricated base plate fitted with a heavy vertical pipe for guiding the dropping mechanism.
The base is made from mild steel plate. The frame on which the base plate is mounted is
heavily reinforced with mild steel flats placed vertically below it to prevent it from getting
distorted under repeated impacts given by the falling packages. The dropping arrangement
is fitted on one side of the frame.
The dropping mechanism consists of a metallic frame guided on a vertical pipe with two
counter weights so that it can be lifted easily for attaining the required dropping heights,
where it can be held with a pin. The frame can be held at any of the various pre-determined
heights marked on the guiding pipe. It carries two doors with stainless steel covers,
arranged so that they join at the center of the frame. The doors are held horizontal with the
help of release pins. When released, they fall down vertically on the side of the frame, thus
causing the packages / boxes / containers supported on them to fall down vertically on to
the steel base plate.
TECHNICAL DATA
 Model: PCDT-1
 Height: 1.8 meter (Adjustable)
 Load: Up to 60Kg.
 Minimum Drop Height: 500mm (0.50 m)
 Maximum Drop Height: 1800mm (1.8 m)
 Maximum sample Weight: 60 Kg
 Sample Mounting table: 500mm x 500 mm
 Adjustable angle holder is provided with the
device.
 Type of tests:
 Straight Drop
 Angular Drop
 Safety: Locking pin
 Standards: IS:7028 Pt IV
Features:
 Provision to uplift test platform by guide mechanism
 Drop Height adjustable clamp
 Straight and Angular Drop tests can be performed on a single Instrument
 Strong base plate with rugged structure
 Optional Features: Pneumatic model and in various platform sizes also available as
per requirement.

HEIGHT GAUGE- DIGITAL
Pacorr Height gauge offers a digital reading of height of the test specimen with great
precision. The manufacturers in industries can rely on this instrument for precise and
accurate measurement of heights of different products. With the easy and simple operation
of the instrument, it becomes very easy for the user to take the measurements.
TECHNICAL DATA
 Range: 0-12'', resolution: .0005''/0.01mm, accuracy: A plus or minus
.0015'', repeatability: 0.01mm, max. Response speed: Unlimited
 Measurement range of 0” - 12"/0 - 300 mm, and precise to
0.0005”/0.01 mm
 LCD digital readout displays figures in inches or metric units for
viewing ease
 Hand-operated feed wheel for measurement ease
 Electrostatic capacitance linear encoder helps ensure repeatable,
precise measurement.
 Height: 287mm
 Weight: 6.76 Kg
 Measurement System: Inch
 Width: 205.7mm
FILL HEIGHT GAUGE
The Fill height gauge is used in labs for measurements of the containers. This is mainly used
in plastic, PET and glass bottle industries. The instrument helps in determining the fill level
of the containers and bottles so that the users could set the level
according to the prescribed international standards.
 Model: PCFHG-1
 Measurement Range: 50mm and 500 mm.
 Operation: Manual

PI TAPE
PI Tape helps the industries in accurate measurement of diameter of cylindrical products
that cannot be measured through other methods such as measuring tape. The instrument
has accurate markings and is very easy to use. The simple operation and high precision
makes it an ideal instrument to measure the diameter of difficult surfaces and objects.
TECHNICAL DATA
 Model: PCPIT
 Material: High Strength Steel
 Diameter: 20-300 mm
 Circumference: 60-950 mm
 Least Count: 1 mm
 Measurement Units: mm
 Measurement: Visually on Scale
DIGITAL VERNIER CALIPER
Vernier calipers are measuring tools used mainly for measuring linear dimensions. These
calipers come handy in measuring the diameter of circular objects. Their circular jaws fit
securely on either side of the circumference of round objects. Vernier calipers have two
types of scales- a fixed main scale and a moving Vernier scale.
Technical Specification
1. Range: 0-300mm
2. Repeatability: 0.01mm
3. Resolution: 0.01mm
4. Power supply: Button-type silver oxide battery SR44 (No. 938882), 1 piece supplied as
standard (The standard supplied battery is for the monitor.)
5. Battery life: Approx. 3.5 years under normal use
6. The slider configuration features an ergonomic, thumb-friendly shape.
7. Step-measurement capable
8. Font height: 9mm, alleviation of fatigue with the high-contrast LCD
9. Carbide-tipped jaw models are ideally suited to the measurement of
rough-machined work-pieces, castings, grindstones, etc.
10. The data output function allows integration into statistical process control and
measurement system

MOISTURE ANALYZER
The Moisture Analyzer uses a halogen lamp to produce heat so that the moisture content is
vaporized and then the moisture content is analyzed by the sensors and the result is
displayed on the digital LCD with backlit. The instrument is very beneficial for the industries
such as food industry, cement industry, pharmaceutical industries and so forth. The
Instrument is capable of giving highly precise test results again and again with great
repeatability.
TECHNICAL DATA
 Model: PC-AGS120
 Maximum Capacity: 120gm
 Readability Moisture Content: 1mg/0.01%(Sample > 5gm)
 Pan Size: 90mm
 Heater Type: Halogen
 In Use Cover: Included
 Net Weight: 7Kg
 Power: 230V, 300VA
 Shut off Criteria: Manual, Auto
 Temperature Range: 40 °C – 250 °C
 Sampling Time: 1 – 180 Seconds
 Max. Drying Time: 10 Hrs.
 Chamber Heating Time Upto 100 Deg. C: 3min.
 Dimensions: 215mm x 345mm x 200mm
 Unit of Measurement: %Moisture Content
 Communication: RS232

PRECISION WALL THICKNESS GAUGEMTG-99 (USA)
The MTG-99 is simple to use to non-destructively measure the thickness of any non-ferrous
material up to 1" with access to both sides. The MTG-99 is portable, battery operated, can
change color and vibrate on alarm, has an internal data logger and is proudly made in the
USA. Typical applications include plastic bottles, containers, tubing, Titanium, Aluminum and
Copper tubes and pipes as well as composite structures.
TECHNICAL DATA
 Overall Dimension: 7.25" L x 4.00" W x-2.00" H (184mm x 101.6mm x 50.8mm)
 Weight: 1.15 lbs (.52 kg) with internal Li-Ion battery
 Operation temperature: -4 to 122F (-20 to 50C)
 Keypad: Illuminating rubber keypad
 Languages: English, French, German, Spanish,
Italian, Russian, Czech, Finnish, Chinese, Japanese,
Hungarian
 Data Storage: Onboard & removable up to 32 GB
Micro-SD card
 Battery Life: 16 h (lithium-ion) (TBD) AC
 Power Requirements: AC Mains: 100 VAC to120 VAC,
200 VAC to 240 VAC
 Display Type: 3.5" high resolution color TFT display,
320 x 240 pixels (1/4 VGA), sunlight readable,
including multiple color pallets
 Backlight: Light Emitting Diode (LED) backlight. Includes variable light intensity.
 Display Dimensions: (W x H, Diag.) 2.76 in. x 2.07 in., 3.5 in. (70.08 mm x 52.56
mm, 88.9 mm)
 Min/Max Capture Mode: Captured at 60 Hz measurement rate Display
 Formats: 4 modes; Thickness only, Thickness with 3 additional customizable choices,
Thickness and Strip chart, Grid View
 Display Update Rate: 4, 8, 16 and 20 Hz
 Alarm: High and Low alarms with vibrate feature
 Thickness Range: 0.0001"-1.00" (0.001-25.4 mm) of any non-ferrous material with
access to both sides
 Resolution: 0.01 in. (0.1 mm), 0.001 in. (0.01 mm), 0.0001 in. (0.001 mm),
(depending on thickness range)
 Data Logger: Internal file-based alphanumeric data logger
 Memory Card: Maximum capacity: 32 GB removable Micro-SD memory card
 Shutoff: selectable 1-31 minutes or "Never" shut off
 Inputs/Outputs: USB 2.0 peripheral, port RS-232 (Optional), Bluetooth (optional):
Send and receive readings and files via Bluetooth
 Environmental Testing: Designed for IP67
 Warranty: One year warranty under normal use on parts, 90 days for the probe. The
probe should not be dropped or used around ferrous materials such as iron, steel,
doing so will void the warranty.

VISION MEASURING SYSTEM
Technical Specifications

•
Model
Measuring Range (X/Y/Z)
PC-SVI-IMG-3D
150 x 100 x 100 mm
• Platform Load Capacity 25 kg
• Operation Mode Manual
• Magnification 35X - 225X(Optional: 18X - 450X)
• Illumination- Surface Fibre optic light / Adjustable LED
• Illumination- Contour Halogen or Diffused LED
• Power Supply 220V ± 5% @ 50/60 HZ
• Resolution 0.001 mm/ 0.0005 mm
• Accuracy (X/Y) (3 + L/200) µm
• Repeatability ± 2 µm
• Camera High resolution Colour CCD camera
Software Features
The conceptual model of software organizes the workflow to support operator needs at every
stage of measurement process- Measuring-Recording-Analyzing-
ReportingandCommunicatingthedimensionaldata.OneclicktoolbarforLines,Circles,Arc,Blob, Distance
, Angle, Profileetc.
• Inch / metric conversion • User friendly full part programming
• Polar / Cartesian co-ordinate • Video edge detection
• Deviation Analysis of point data • Edge teaching algorithms for weak edges
• 3D geometric measurement
functions
• 2D & 3D feature construction capability
• Up to 1000 points allowed on each
feature
• Vision tool like burr trimming & sharpening
image.
• Customized report generator • Segmented Linear error Correction.
• Axis presets and feature creation • Zoom in, zoom out move, and rotate the figure.
• CAD / IGS Interface • Form indication (roundness, straightness etc.)
• 12 Types of tolerance settings • Auto Feature Detection
• Focus Indicator for accurate 3D
measurement

Geometrical Specifications
• Constructions of imaginary features, intersections, mid points, mid lines, mid planes,
cylinder etc.
• Recall coordinates of measured results at any time.
• Allows link with Excel for dynamic editing of Inspection reports.
• SkewandDatum:Featureslikeplanetoplanealignment,axistoaxisforX,Y,Zanddatumpointof3or2axissyst
em takes care of mechanical mis alignment of the part.
• Navigation Function guides you to a quick and correct measurement trip. You can follow the
indicator tomove stage of System. You just go to nearby, point the system, it will auto search in
correct position.
Options for PCSVI-IMG-3D
1. Least Count or Resolution
• 0.5 micron- Extra Charges for PCSVI-IMG-3D with Least Count 0.5Micron
2. Touch Probe
A-VMS-TP1:Rensishaw MCP Touch Probe -This is specially designed for measurement of critical &
difficultcomponents which cannot be projected on monitor through Optical System. Extra Charges when
supplied with the System along with calibrationBall
A-VMS-TP2:Rensishaw MH 20i and TP -20 probe: This is very flexible probe system which can be
rotated to different angles for inspection of critical 3D angular components.
3. Auto Focus.
A-VMS-AF:Video auto focus enable fully automatic part inspection, eliminates time consuming and subjective
manual focusing. Extra charges when supplied with the system.
4. Motorized System
A-VMS-MA(XYZ):Extra Charges when Supplied with 3 Axis (X,Y& Z) Motorized System with Joystick
5. Work-Piece Holding Accessories
A-VMS-BC: Centre Holding Device
A-VMS-VB2: V.Block Set of 2 Nos.
A-VMS-CHD:Collect Holding Device
6. Other Accessories
A-VMS-PC: PC for the above system with 19" TFT Monitor with Windows licenced O.S.
A-VMS-CM:Calibration Master for Vision
7.Cad Overlapping Module
A-VMS-CW: Module to measure profile tolerances on to overlap the measured points on the 3D model and
find out the variation/ deviation between the measured points & model

TRANSPARENCY TESTER
Pacorr Transparency tester is used to check the transparency of wall of pet preforms &
bottles.
Product Details:
Material Aluminium- Powder coated
Measuring range 0.0 to 100.0%,
Least count 0.1%
Size of the
specimen
50mm x 50mm
Power supply 220V AC
Frequency 50 Hz
PERPENDICULARITY TESTER
Pacorr Perpendicularity Tester is useful to check the perpendicularity of preforms or
bottles. It is provided by digital gauge for more accurate measurements.
Product Details:
Accuracy 0.1%
Range 0-12mm
Least count 0.001mm
LCD Display Digital
Approx. Weight 4 Kg
DIGITAL ECCENTRICITY TESTER
Pacorr Eccentricity/thickness tester is useful to check the eccentricity/thickness of
preforms or bottles. It is provided by digital gauge for more accurate measurements.
Product Details:
Range 0-12mm
Accuracy 0.1%
Least count 0.001mm
LCD Display Digital
Approx. Weight 4Kg

PRE-FORM GO NO GO GAUGE
 Custom made: As per the client’s requirements
SECURE SEAL TESTER FOR BOTTLES
Bottle Closure Seal Tester is designed to check bottle and closure thread integrity and Seal
strength for Glass / PET Beverage Containers with Plastic Closures Most Useful for
Carbonated Drinks. Change Parts are available for different size closures.
TECHNICAL DATA
 Measuring range: 0 to 12.00 bar
 Resolution: 0.5 bar
 Input Medium : Carbon Di Oxide / Compressed Air / Nitrogen
 Test on bottles & cans.
 Display: Analogue Gauge
 Units: bar/Psi
 Setting of the level of pressure (regulator)
 Setting maximum pressure: 12 bar
Opacity Tester
Technical Specifications:
 Display: Digital (LED)
 Range: 0-99.9%
 Resolution: 0.01%
 Direct Displays: % Opaque
 Power: 230V AC, 50Hz
 Paint: Powder Coated

Pet & Preform Testing Instruments

More Related Content

Similar to Pet & Preform Testing Instruments (20)

Recently uploaded (20)

Pet & Preform Testing Instruments