Plc-s7-1200-opc-to-pc-connection-guide

Table of Contents

Table of Contents
1 Introduction........................................................................................................ 4
2 Configuration of the S7-1200............................................................................ 6
2.1 Configuring Hardware .......................................................................... 6
2.2 Creating a User Program ..................................................................... 8
3 PC Station Configuration ................................................................................ 13
4 Configuring the S7 Connection...................................................................... 18
4.1 Add S7 Connection ............................................................................ 18
4.2 Display and Change Properties of the S7 Connection in the
Inspector Window............................................................................... 19
5 Compiling and Downloading the Configuration and User Program of
the S7-1200....................................................................................................... 23
6 Compiling and Downloading the PC Station Configuration........................ 28
7 OPC Scout V10................................................................................................. 34

S7 communication between PC station and S7-1200
V1.1, Item ID: 39960679 3

http://eyeteck.vn

1 Introduction

1 Introduction
This entry shows you how to configure an S7-1200, a PC station and an S7
connection in STEP 7 (TIA Portal) V11 so that you can exchange data between the
stations over Industrial Ethernet.

Create project
In Windows, select the command "Start  Programs  Siemens Automation 
TIA Portal V11" to start STEP 7 (TIA Portal) V11.
In the Portal view, select the "Create new project" action.
Enter the project name in the appropriate field.
Figure 1-1

Click the "Create" button to create a new project.
Figure 1-2

Switch to Project View
Use the "Project View" link to switch to the Project View.

4 V1.1, Entry ID: 39960679


1 Introduction

Figure 1-3

V1.1, Item ID: 39960679 5


2 Configuration of the S7-1200

Configure your S7-1200 in STEP 7 (TIA Portal) V11. Then create the user program
and define which data is to be monitored over the S7 connection of the OPC
server.

2.1 Configuring Hardware
Add an S7-1200 Station
In the project tree, double-click the "Add new device" item. The "Add new device"
dialog opens.
Figure 2-1

Click the "PLC" button in the working area. Go to "PLC  SIMATIC S7-1200 
CPU" and select the required controller. Click the "OK" button to add the selected
S7-1200 CPU to your project.

6 V1.1, Entry ID: 39960679



Figure 2-2

Add IP address and assign subnet
In the project tree, double-click the "Devices & networks" item. This opens the
"Network View" working area of the hardware and network editor.
Click the PROFINET interface of the S7-1200 CPU.
In the inspector window you switch to the "Properties" tab. Click the "Ethernet
addresses" item in the area navigation.
In this example you enter the IP address 172.16.43.20 and the subnet mask
255.255.0.0 for the PROFINET interface of the S7-1200 CPU.
Then assign a subnet to the PROFINET interface. Click the "Add new subnet"
button to insert a new subnet.
The connection between the subnet, PN/IE_1, for example, and the S7-1200 is
now displayed in the "Net View" working area of the hardware and network editor.

V1.1, Item ID: 39960679 7



Figure 2-3

2.2 Creating a User Program
Add data block
In the project tree, navigate to the device folder of the S7-1200 CPU,
"PLC_1 [CPU 1212C …]", for example. The device folder contains structured
objects and actions that belong to the device.
In the device folder you navigate to the "Program blocks" subfolder and double-
click the "Add new block" action. The "Add new block" dialog opens.

8 V1.1, Entry ID: 39960679



Figure 2-4

Click the "DB Data block" button. Enter the name of the data block and enable the
"Manual" option to assign the number of the data block manually. If you enable the
"Automatic" option, the number of the data block is assigned automatically.
Select the "Standard - compatible with S7-300/400" option for block access.
Data blocks with standard access have a fixed structure. The data elements in the
declaration include both symbolic names and a fixed address in the block. The
address is displayed in the "Offset" column. You can address the tags in this block
both symbolically and absolutely.
Apply the settings with "OK".
The data block DB1 "Data block 1" is used in this example.

V1.1, Item ID: 39960679 9



Figure 2-5

Define static tag in the data block
Define the static tag "static_01" of the "Bool" data type in the DB1 "Data block 1".
Click the "Compile" button.

10 V1.1, Entry ID: 39960679



Figure 2-6

Create Main [OB1]
In the "Program blocks" folder, you double-click the "Main [OB1]" block to open the
corresponding dialog window.
Figure 2-7

Create the program as shown in Fehler! Verweisquelle konnte nicht gefunden
werden.. The bit links are in the "Instructions" task card under "Basic instructions"
 Bit links".
Use drag-and-drop to add the Normally open contact, the flip-flop and the
Assignment to Network 1 of the "Main [OB1]" block.
Assign the tags below to the flip-flop, to the normally open contact at inputs S and
R of the flip-flop and to the assignment at output Q of the flip-flop.
Table 2-1
Tag Description
M1.0 SR flip-flop input S: NO contact
M1.1 SR flip-flop input R: NO contact
DB1.DBX0.0 SR tag
M2.0 SR flip-flop output Q: Assignment

V1.1, Item ID: 39960679 11



Click the "Compile" button.
Figure 2-8

Notes The "%" character before the absolute address is added automatically by STEP
7 (TIA Portal) V11.

12 V1.1, Entry ID: 39960679


3 PC Station Configuration

Before you start configuring the PC station in STEP 7 (TIA Portal) V11, determine
or change the IP address of the network card that you are using in your PC station.
You enter the IP address and subnet mask of the network card when you configure
the PC station in STEP 7 (TIA Portal) V11.

Determine and change the IP address and subnet mask of the network card
In Windows, under Network Connections, you open the Properties dialog of the
Local Area Network (LAN).
In this example the network card receives the IP address 172-16.40.11 and subnet
mask 255.255.0.0.

Notes The IP address configured for the PC station in STEP 7 (TIA Portal) V11 must
match the IP address set in Windows. If you are not using a router, the IP
addresses of the PC station and the S7-1200 CPU must be in the same subnet.

Figure 3-1

V1.1, Item ID: 39960679 13



Add a PC Station
In STEP 7 (TIA Portal) V11 you open the project that contains the configuration for
the S7-1200 station.
In the project tree, double-click the "Add new device" item. The "Add new device"
dialog opens.
Figure 3-2

Click the "PC systems" button in the working area. Go to "PC systems  PC
general" and select the "PC station" item.
Click the "OK" button to add a PC station named "PC-System_1" to your project.

14 V1.1, Entry ID: 39960679



Figure 3-3

This opens the "Device View" working area of the hardware and network editor.
In the project tree, navigate to the device folder of the PC station,
"PC-System_1 [SIMATIC PC station]", for example. The device folder contains
structured objects and actions that belong to the device.
In the device folder double-click the "Device configuration" object to open the
"Device View" working area of the hardware and network editor.

V1.1, Item ID: 39960679 15



Figure 3-4

Configure user application and communication module of the PC station
Go to the "Device View" working area of the hardware and network editor and
configure and parameterize the modules of the PC station.
The "Hardware catalog" task card contains the user applications and
communication modules that you can configure in the PC station. Using drag-and-
drop add the "OPC server" user application to Slot 1 and the "IE general"
communication module to Slot 2 of the PC station.
Figure 3-5

16 V1.1, Entry ID: 39960679



Add IP address and assign subnet
"Network View" working area of the hardware and device editor.
Click the PROFINET interface of the network card in the PC station.
In the inspector window you switch to the "Properties" tab. In the area navigation
select the "Ethernet addresses" item.
In this example you enter the IP address 172.16.40.11 and subnet mask
255.255.0.0 for the network card.
Select the subnet that you have already assigned to the S7-1200 CPU and assign
it also to the network card of the PC station.
The connection between the subnet, PN/IE_1, for example, and the S7-1200 and
the PC station is now displayed in the "Net View" working area of the hardware and
device editor.

Notes The IP address configured for the PC station in STEP 7 (TIA Portal) V11 must
match the IP address set in Windows. If you are not using a router, the IP
addresses of the PC station and the S7-1200 CPU must be in the same subnet.

Figure 3-6

V1.1, Item ID: 39960679 17


4 Configuring the S7 Connection

4.1 Add S7 Connection
"Network View" working area of the hardware and network editor.
In the toolbar of the Net View, click the "Connections" icon to switch to the mode
for setting the connections.
In the drop-down list box you select "S7 connection" as connection type.
Figure 4-1

In the graphical area of the Net View, click the OPC server in the PC station and
connect it to the S7-1200 CPU.
In the Net View, the S7 connection is displayed in the graphical area and in the
"Connections" table in the table area.

18 V1.1, Entry ID: 39960679



Figure 4-2

4.2 Display and Change Properties of the S7 Connection in
the Inspector Window
Proceed as described below to have the properties of the S7 connection displayed
in the inspector window.
• In the table area switch to the "Connections" table and select the configured S7
connection.
• In the inspector window you switch to the "Properties" tab.

General properties
In the area navigation select the "General" item to display the connection path.
The S7 connection is between the OPC server and the S7-1200 CPU.

V1.1, Item ID: 39960679 19



Figure 4-3

In the area navigation select the "Special connection properties" item.
Here you see a display of the special connection properties of the local end point,
"Active connection establishment", for example.
In this example, the OPC server establishes the S7 connection. The
communication partner, S7-1200 CPU, is participates passively in establishing the
connection.

20 V1.1, Entry ID: 39960679



Figure 4-4

In the area navigation select the "Address details" item.
Here you have a display of the local end point, the partner end point and the TSAP
of both end points.

V1.1, Item ID: 39960679 21



Figure 4-5

22 V1.1, Entry ID: 39960679


5 Compiling and Downloading the Configuration and User Program of the S7-1200

5 Compiling and Downloading the
Configuration and User Program of the S7-
1200
Compile
To compile the configuration and user program of the S7-1200 you right-click the
device folder of the S7-1200 CPU in the project navigation. There you select
"Compile  All".

V1.1, Item ID: 39960679 23



Figure 5-1

Download
To download the configuration and user program of the S7-1200 you right-click the
device folder of the S7-1200 CPU in the project navigation. There you select
"Download to device  All".

24 V1.1, Entry ID: 39960679



Figure 5-2

The "Extended download to device" dialog opens. Check the settings below:
• PG/PC interface type
• PG/PC interface
• Connection with the subnet
Under "Accessible devices in subnet" you select the relevant device and click the
"Load" button.

V1.1, Item ID: 39960679 25



Figure 5-3

Notes If the project has already been loaded once into the S7-1200 CPU, the "Load
preview" dialog is opened immediately instead of the "Extended download to
device" dialog.

The "Load preview" dialog opens. Click the "Load" button.

26 V1.1, Entry ID: 39960679



Figure 5-4

The dialog box containing the results of the download procedure opens. If the S7-
1200 is in "STOP" mode for the download procedure, check the "Start all" check
box. Click the "Finish" button. The status LED of the S7-1200 CPU indicates the
"RUN" mode after downloading.
Figure 5-5

V1.1, Item ID: 39960679 27


6 Compiling and Downloading the PC Station Configuration

6 Compiling and Downloading the PC
Station Configuration
Open the Station Configuration Editor
Open the Component Configuration Editor with the icon in the Windows taskbar.
Figure 6-1

Insert the modules, namely the OPC server and the network card, in the
Component Configuration Editor in accordance with the hardware configuration.
In this example you add the OPC server to Slot 1 and the network card to Slot 2.
Then change the station name in the Component Configuration Editor. The name
of the PC station must be identical in STEP 7 (TIA Portal) V11 and in the
Component Configuration Editor.
The station name "PC-System_1" is used in this example.

28 V1.1, Entry ID: 39960679



Figure 6-2

V1.1, Item ID: 39960679 29



Compile
To compile the configuration of the PC station you right-click the device folder of
the PC station in the project navigation. There you select "Compile  All".
Figure 6-3

Download
To download the configuration of the PC station you right-click the device folder of
the PC station in the project navigation. There you select "Download to device 
All".

30 V1.1, Entry ID: 39960679



Figure 6-4

The "Extended download to device" dialog opens. Check the settings below:
• PG/PC interface type
• PG/PC interface
• Connection with the subnet
Under "Accessible devices in subnet" you select the relevant device and click the
"Load" button.

V1.1, Item ID: 39960679 31



Figure 6-5

Notes If the project has already been loaded once into the S7-1200 CPU, the "Load
preview" dialog is opened immediately instead of the "Extended download to
device" dialog.

The "Load preview" dialog opens. Click the "Load" button.

32 V1.1, Entry ID: 39960679



Figure 6-6

Commissioning of the PC station is completed after downloading of the
configuration.

V1.1, Item ID: 39960679 33


7 OPC Scout V10

7 OPC Scout V10
In this example the OPC Scout V10 is used as OPC client. Using the OPC client
you can access the data of the S7-1200 CPU over the OPC server.
Start the OPC Scout V10 by means of the menu "Start  SIMATIC  SIMATIC
NET  OPC Scout V10".

Establish connection to the OPC server
In the Server Explorer you double-click the "OPC.SimaticNET" item to establish a
connection to the OPC server.
Figure 7-1

34 V1.1, Entry ID: 39960679


7 OPC Scout V10

The configured S7 connection named "S7_Verbindung_1" is displayed in the
Server Explorer under OPC.SimaticNET in the "S7" folder.
Figure 7-2

V1.1, Item ID: 39960679 35


7 OPC Scout V10

Create OPC items
Add the items below to the DA view.
Table 7-1

S7:[S7_Verbindung_1]MX1.0 By means of the OPC item you monitor and control
the marker bit M1.0 in the S7-1200 CPU.
S7:[S7_Verbindung_1]MX1.1 By means of the OPC item you monitor and control
the marker bit M1.1 in the S7-1200 CPU.
S7:[S7_Verbindung_1]MX2.0 By means of the OPC item you monitor the marker
bit M2.0 in the S7-1200 CPU.
S7:[S7_Verbindung_1]DB1, X0.0 By means of the OPC item you monitor Bit 0.0 of
the DB1 data block in the S7-1200 CPU.

Figure 7-3

Monitor OPC items
Click the "Monitoring ON" button to monitor the values of the OPC items. The
values of the OPC items are displayed in the "Value" column.
Figure 7-4

36 V1.1, Entry ID: 39960679


7 OPC Scout V10

Write values
In the "New value" column you enter the value that you want to write to the S7-
1200.
Enter the values below in the "New value" column (see Table 7-2). Click the "Write"
button. The marker bit M2.0 and Bit 0 in DB1 are given the value "True".
The results of the write procedure are displayed in the "Value" column.
Table 7-2
OPC item New value
S7:[S7_Verbindung_1]MX1.0 True
S7:[S7_Verbindung_1]MX1.1 False

Figure 7-5

Enter the values below in the "New value" column (see Table 7-3). Click the "Write"
button. The marker bit M2.0 and Bit 0 in DB1 are reset to the value "False".
The results of the write procedure are displayed in the "Value" column.
Table 7-3
OPC item New value
S7:[S7_Verbindung_1]MX1.0 False
S7:[S7_Verbindung_1]MX1.1 True

Figure 7-6

V1.1, Item ID: 39960679 37


Plc-s7-1200-opc-to-pc-connection-guide

More Related Content

What's hot (9)

Viewers also liked (20)

Similar to Plc-s7-1200-opc-to-pc-connection-guide (20)

More from Bùi Thể (13)

Recently uploaded (20)

Plc-s7-1200-opc-to-pc-connection-guide