Ditek POC Data Sheet
0 likes112 views
Ditek's POC series surge protectors use advanced hybrid circuit technology to safeguard Ethernet and PoE extenders from transients that could damage long video feeds, particularly for externally mounted cameras. The DTK-POC is a single-channel device that provides optimal protection without signal loss and should be installed at each camera along with a 16-channel RM16POC at the head-end equipment. Key specifications include a service voltage of 60VDC, peak surge current of 100A, and an operating temperature range of -40°F to 158°F.
Ditek POC Data Sheet
- 1. DITEK's POC (Power Over Coax) series surge protectors utilize state-of-the-art hybrid circuit technology to protect Ethernet and PoE Extenders from damaging transients; typically induced onto long video feeds that run between head-end equipment and externally mounted cameras. Whether the need is for video protection on cameras, switches or DVR's, the POC provides optimum protection without signal loss. The DTK-POC is a single channel device, used to protect externally mounted cameras. For complete protection install the POC at each externally mounted camera, and the 16-Channel RM16POC at the head-end equipment Ethernet and POE Extenders Over Coax - Surge Protector General Product Specifications DTK-POC DTK-POC One DITEK Center 1720 Starkey Road Largo, FL 33771 Document: SPS-100079-001 Rev 2 05/14 ©2014 DITEK Corp. Specification Subject to Change 1-800-753-2345 Direct: 1-727-812-5000 Technical Support: 1-888-472-6100 www.ditekcorp.com DTK-POC Camera, Base Module Service Voltage 60VDC Voltage Clamping 1000VDC 1mA 61.6V C-S 108V C-G 62.4V S-G Peak Surge Current 10/1000uS 100 A DTK-POC Specifications Connection Method: BNC Female In/Out Data Rate: 10/100 BASE-T Ethernet Max Continuous Current: 1.5 Amps Impedance: 75 Ohms Insertion Loss: -0.048dB (10MHz), -0.035dB (100MHz) Protection Modes: CP-S, CP-G, S-G Center Pin - Shield, Center Pin - Ground, Shield - Ground Operating Temperature: -40°F - 158°F (-40°C - 70°C) Maximum Humidity: 95% non-condensing Dimensions: 1.0”H x 3.2”W x 2.2”D (25.4mm x 81.3mm x 55.6mm) Weight: 2.5oz (71g) Housing: ABS Product Features • Protects power, video and data on IP cameras • BNC Female In/Out connection with external grounding screw • Ethernet data speed without signal degradation • Multi-stage, SAD technology, hybrid design • PoE Plus ready for high-wattage applications • Small footprint easy installation • Ten Year Limited Warranty