Preprocessing techniques for recognition of ancient Kannada epigraphs

International Journal of Electrical and Computer Engineering (IJECE)
Vol. 14, No. 1, February 2024, pp. 358~365
ISSN: 2088-8708, DOI: 10.11591/ijece.v14i1.pp358-365  358
Journal homepage: http://ijece.iaescore.com
Preprocessing techniques for recognition of ancient Kannada
epigraphs
Anusha Leela Somashekharaiah, Abhay Deshpande
Department of Electronics and Communication Engineering, R.V. College of Engineering, Bengaluru, India
Article Info ABSTRACT
Article history:
Received May 18, 2023
Revised Sep 12, 2023
Accepted Oct 6, 2023
The Dravidian language Kannada is most spoken in the state of Karnataka,
and because of its extensive library of epigraphs, including old manuscripts
and inscriptions, it is regarded as a repository of knowledge. To make this
knowledge more accessible to the people, efforts are being made to digitize
the documents for optimized usage and storage using optical character
recognition (OCR) but oftentimes these epigraphs are in poor conditions and
the quality of the image being fed to the OCR model may not be good enough
to achieve high accuracy of recognition and classification. Preprocessing
techniques are used to make the dataset more reliable by improving the quality
and accuracy of the model. Preprocessing methods including binarization,
smoothing, edge detection, and segmentation help to increase the model's
interpretability, decrease overfitting, and train it more quickly and with fewer
resources. When applied to the epigraphs, these preprocessing approaches
significantly increase the image quality and minimize noise, making it simpler
to identify and digitize the text.
Keywords:
Ancient text recognition
Binarization
Character recognition
Edge detection
Grayscaling
Segmentation
Smoothing This is an open access article under the CC BY-SA license.
Corresponding Author:
Anusha Leela Somashekharaiah
Department of Electronics and Communication Engineering, R.V. College of Engineering
Mysore Rd, RV Vidyaniketan, Post, Bengaluru, Karnataka 560059, India
Email: anushashekar@rvce.edu.in
1. INTRODUCTION
About 44 million people speak Kannada, a Dravidian language, primarily in the state of Karnataka in
southern India. One of India's oldest tongues, it has a long literary history that dates back to the ninth century.
The script used in Kannada is distinctive and is descended from the ancient Brahmi script. Sanskrit and other
Indo-Aryan languages, as well as other Dravidian languages, have all influenced and been influenced by the
language. The old Kannada script has evolved over time and has been used to write inscriptions, manuscripts,
and other important documents. The study of ancient Kannada script is important for understanding the history,
culture, and language of Karnataka and the wider region. However, it can be challenging because the old
Kannada script is significantly different from the modern Kannada script, which has evolved over time and
across multiple dynasties.
The process of locating and deciphering extinct scripts or writing systems is known as ancient script
recognition. Common examples of ancient artifacts with these scripts include pottery, coins, tablets, and
manuscripts. Understanding the history, culture, and language of ancient civilizations requires a thorough
understanding of ancient scripts. Modern developments in artificial intelligence and machine learning have
made it possible to automate the process of script recognition. A standard optical character recognition (OCR)
system is designed to first divide the entire document into text lines, then into words, and last into individual
characters, from which the relevant features can then be extracted, the characters can then be recognized, and

Int J Elec & Comp Eng ISSN: 2088-8708 
Preprocessing techniques for recognition of ancient Kannada epigraphs (Anusha Leela Somashekharaiah)
359
the characters can then be classified. The required features are then extracted from these characters, which are
subsequently recognized and classified using these characters [1].
In order to identify and translate the script, it is necessary to train computer algorithms to recognize
patterns and characters in the script. However, due to the poor preservation of many ancient scripts, ancient
script recognition continues to be a complex and difficult field. Ancient text character recognition using deep
learning selection auto encoder decoder technique when used for the purpose of character level recognition
where the binarization accuracy was 74.24% and segmentation using the seam carbel method showed an
accuracy (As) of 70% [2].
The various preprocessing techniques used in character recognition systems with various types of
images, ranging from simple handwritten form-based documents and documents with colored and complex
background and varied intensities, are covered in analytical reviews on recent OCR system architectures and
technologies [3]–[5]. Preprocessing, which entails cleaning and converting raw data into a format that can be
analyzed, is a crucial step in data analysis and machine learning. Preprocessing in offline optical character
recognition appears to be considerably influenced by both preprocessing techniques and operating conditions,
according to research [6]. Preprocessing techniques like gray scaling, binarization, edge detection, smoothing
among others are used to improve the accuracy of the machine learning model [7]. Preprocessing is significant
because it addresses common problems with raw data like noise, missing values, and inconsistencies. This
improves the accuracy and effectiveness of machine learning models. Therefore, preprocessing algorithms in
ancient script recognition can improve the quality, accuracy, and efficiency of the recognition model.
2. METHOD
Six essential phases make up a standard character recognition model: data acquisition, preprocessing,
segmentation and augmentation, feature extraction, classifier training, and evaluation. Preprocessing is
essential for preparing raw data for the creation and training of machine learning models. It is much more
crucial in the case of ancient writings because they are not always discovered or preserved in the best conditions
and may not be completely appropriate for the neural network model in its raw form [8], [9]. The preprocessing
is further divided into various steps such as gray scaling, binarization, edge detection and cropping, smoothing,
line and character segmentation depending on the type of epigraph used. A combination of smoothing and
character segmentation was successfully implemented on stone inscription whereas a combination of line and
character segmentation was more successful in handwritten scriptures and manuscripts. Greyscaling turns a
regular red, green, and blue (RGB) image into a grey scale and stores values in a single array (black and white),
so the calculation above in a neural network only needs to calculate one convolution as opposed to performing
convolutions on three different arrays for an RGB image. Greyscaling increases computational efficiency as a
result. Image binarization, on the other hand, is the process of converting a document image into a bi-level
document image. A dual collection of picture pixels is made up of black and white pixels. The main goal of
picture binarization is to distinguish between the foreground and background text in a document [10].
Edge detection is an image processing technique used to identify regions in a digital image with
abrupt brightness fluctuations or any other visual discontinuities. The areas where the brightness of the
image varies significantly are the margins or boundaries of the image. It may be essential to “crop” an image
by eliminating or changing its outer edges in order to enhance framing or composition, call attention to the
image's subject, change the size, or aspect ratio. In order to improve an image, it must be cropped, which
entails removing any unnecessary elements. If necessary, skew correction is carried out to rectify the text
skew in an image that has a block of text rotated at an unidentified angle [11], [12]. This can be done by
finding the text block in the picture, calculating the text's rotational angle and then the image is rotated to
account for the skew. A method of digital image processing known as “image smoothing” lowers and
suppresses the image noise. Line segmentation is used to identify and segment the lines that are present in
the image or the block of text. Character segmentation further identifies and segments the characters that are
present in the text in the image.
2.1. Data acquisition and preprocessing
Preprocessing is a critical step in image processing that can significantly impact the accuracy and
performance of subsequent analysis or processing steps. Preprocessing techniques can aid in the extraction of
significant features and lessen the computational burden of subsequent processing steps by removing noise and
artifacts, enhancing relevant information, and enhancing image quality [13]. Additionally, preprocessing can
standardize image dimensions and orientation, adjust for variations in lighting, and improve the image's visual
appeal. Preprocessing, in general, is essential for enhancing the precision, effectiveness, and utility of image
processing in a variety of applications, including computer vision, medical imaging, and remote sensing [14].
The preprocessing steps are explained in further detail below.

 ISSN: 2088-8708
Int J Elec & Comp Eng, Vol. 14, No. 1, February 2024: 358-365
360
2.1.1. Gray scaling
Images are nothing more than tidy arrays of 0 to 255 numeric values for our computer to display
saturation. To make color, red, green, and blue are fundamentally combined in a variety of ratios. When a
picture is a color image, an array of red, blue, and green values is digitally recorded. The computer “mixes”
color outputs on the spot. As soon as it detects this, the neural network executes convolution on each of the
red, green, and blue channels [15]. However, this complicates our calculation and necessitates the use of three
separate arrays for convolutions as opposed to simply one array. The complexity of an image's three-
dimensional (3D) pixel value can be reduced to a one-dimensional (1D) value.
2.1.2. Binarization
The thresholding approach is important throughout the image processing stage of document image
scanning and processing. The primary objective of binarization is to take the characteristics of the original
photos and eliminate any noise [16]. Image thresholding is used to binarize an image based on pixel intensities.
As a result, each pixel will hold less data, simplifying subsequent computations [17]. A threshold and a
grayscale image are normally needed as inputs for such a thresholding technique. The outcome is a binary
picture. If a pixel's intensity in the input image exceeds a threshold, the associated output pixel is marked as
white (foreground), and if it is less than or equal to the threshold, the corresponding output pixel is marked as
black (background). The steps that Otsu thresholding algorithms usually take are as follows: i) processing the
supplied image, ii) obtain the pixel distribution histogram for the image, iii) find the threshold value T, and iv)
replace image pixels with white in areas where saturation is higher than T and black in areas where the contrary
is true.
By minimizing the variance for each class, Otsu's methodology analyses the image histogram and
segments the objects [18]. In most cases, this technique produces the desired results for bimodal images. The
basic approach consists on dividing the image histogram into two clusters using a threshold that is chosen by
minimizing the weighted variance of these classes, denoted as 𝑤2(𝑡). The general algorithm’s pipeline for the
between-class variance maximization option can be represented in the following way: i) calculate the histogram
and intensity level probabilities; ii) initialize 𝜔i(0), 𝜇i(0); iii) iterate over possible thresholds: 𝑡 = 0, maximum
intensity; iv) update the values of 𝜔i, 𝜇i, where 𝜔i is a probability and 𝜇i is a mean of class i; v) calculate the
between-class variance value 𝜎b
2
(t); and vi) the final threshold is the maximum 𝜎b
2
(t) value.
2.1.3. Edge detection and cropping
The image is trimmed to remove the extraneous areas and improve it after greyscaling and
binarization. In order to improve framing or composition, bring attention to the topic of the image, change the
size, or aspect ratio of an image (usually a photo), the outside margins can be removed or adjusted. Following
cropping, edge detection is employed to locate any points in the image with sharp changes in brightness, often
known as discontinuities [19]. The areas where the brightness of the image varies significantly are the margins
or boundaries of the image. The Canny edge detection model turned out to be the most efficient one for the
model used to recognize manuscripts and inscriptions. In several disciplines, the Canny edge detection
algorithm is widely utilized. Noise pollution in the actual workplace is a problem since it can interfere with
image edge identification, which can result in observable errors and lost edge details. To eliminate pepper salt
noise from the image and extract edge information of the area of interest from the image, an image edge
recognition technique based on Canny algorithms is presented [20]. This is the most popular, effective, and
difficult strategy compared to many other ones. It is a multi-stage algorithm used to locate and/or identify
different types of edges. The key steps used when implementing Canny algorithm are as follows: i) the image
should be grayscale; ii) edge identification using derivatives is noise-sensitive, reducing noise is crucial; iii) to
establish the edge's direction and intensity, determine the gradient; iv) non-maximum suppression, applied to
soften the edges of the image; v) use a twofold threshold to differentiate between the images' strong, weak, and
irrelevant pixels; and vi) hysteresis edge tracking only helps weak pixels become strong ones when there is a
strong pixel nearby.
2.1.4. Smoothing
Before segmenting the text within the dataset for epigraphs in the form of stone inscriptions,
smoothing is carried out. Smoothing is a technique used to create images that are less noisy and pixelated [21].
Most smoothing techniques use low-pass filters, but you can also use a kernel a moving collection of pixels by
averaging or median-ing that group of pixels to smooth an image. The aim of picture smoothing techniques is
to maintain the quality of the image while reducing noise without affecting the main aspects of the image.
These noises could be additive, impulsive, multiplicative, or of any other form. By removing noise, smoothing
the inscriptions and epigraphs makes it possible to segment text more effectively.

361
2.1.5. Line and character segmentation
For historical handwritten document photographs, successful text recognition performance
necessitates robust and efficient page segmentation [22]. We are shown an image with text that is written in
lines at this level of segmentation. Line level segmentation aims to divide the image into lines. The idea is that
the rows that correspond to each line of text have a higher proportion of foreground pixels, which, when the
binary image is horizontally projected, corresponds to higher peaks in the histogram. The rows that depict the
intervals between the lines, which correlate to lower histogram peaks, include a lot of background pixels. It is
feasible to segment the lines by picking rows as the segmenting lines that correspond to the lower peaks of the
histogram. Character segmentation divides an image of a group of characters into smaller images that represent
the symbols individually. Within an optical character recognition (OCR) system, it is a decision-making
process. Its inference that a character (or another recognizable unit) is represented by a solitary pattern in the
image may or may not be true. By being incorrect frequently enough, it significantly increases the system's
mistake rate. At this level of segmentation, a single word that was previously segmented and is made up of a
string of characters is shown to us as a picture. Thus, text line segmentation is crucial to a document recognition
system's overall effectiveness [23].
Character segmentation is an important phase in the OCR system. The division of broken characters
is a crucial factor in determining how well a recognition system works [24]. The goal of character level
segmentation is to separate the characters in the image's text into separate groups. This level of segmentation
may or may not be necessary, depending on the circumstances surrounding the OCR's application. If OCR
technology is being utilized on text and words have separate characters, character level segmentation is not
required. Since a uniform space is maintained between the letters within a word, no matter how little it may be,
we can segment the characters in the previous stage (by selecting a very low threshold). On the other hand, if
the OCR system is being used on the text and characters inside a word are joined (cursive handwriting),
character level segmentation must be done. In order to determine the segmentation sites, the segmentation
process uses geometry and shape. Word image thinning is then used to obtain the width of a pixel's worth of
stroke and locate the ligatures of Kannada letters [25]. Character level segmentation is crucial for Kannada
scripts in order to recognize the more intricate and densely located characters. In contemporary Kannada, it is
possible to recognize the segmented characters and process, categorized, and store them correctly.
3. RESULTS AND DISCUSSION
The above-mentioned preprocessing techniques were carried out for the input image shown in
Figure 1. The image shown is a stone inscription from Hampi, wherein the language and characters may have
certain differences when compared to the present-day characters of the Kannada language. As shown below,
the image dimensions, clarity and quality need to be improved and polished before it is fed into a neural network
for identification and classification. Figure 2. shows the input image successfully preprocessed and converted
to a grayscale image from a RGB image. Figure 3. shows the image being further binarized respectively using
the Otsu Thresholding algorithm. The image now contains pixels of values 0 and 1 representing the colors
black (the pixels with higher intensity) and white (the pixels with lower intensity). This makes it much easier
for computation. The Otsu thresholding algorithm holds several advantages over other algorithms owing to its
automatic threshold determination, robustness to varying lighting conditions, computational efficiency, and
adaptability to diverse image characteristics, making it a valuable tool for image segmentation and thresholding
tasks.
Figure 1. Input image of stone inscription

 ISSN: 2088-8708
362
Figure 2. Output image after grayscale conversion
Figure 3. Output image after binarization using Otsu thresholding
Now that the image quality is improved, the goal is to remove the unnecessary components of the
image (the extra parts of the image not containing the texts to be processed) by cropping the (input) image as
shown in Figure 4. After cropping, edge detection algorithm is used to identify the variation in intensities in
the picture thereby detecting the edges. Canny algorithm, which is successfully implemented as shown in
Figure 5, offers several advantages over other edge detection methods. Firstly, canny provides more accurate
localization of edges by employing a multi-stage process involving edge thinning and hysteresis thresholding,
resulting in precise edge detection, and reduced false positives. It also automatically determines optimal
threshold values based on image content and includes a Gaussian smoothing step to suppress noise, leading to
more robust edge detection.
Figure 4. Output after cropping
Figure 5. Edge detected output using canny algorithm

363
Smoothing algorithms are also performed to improve the quality of the image by removing the noise,
as shown in Figure 6, therefore making it easier for segmentation. Line segmentation is performed to divide
and identify the lines in the text, as shown in Figure 7, and character segmentation is performed to further
divide the lines into characters based on the gaps between the characters. This can be observed in the results
shown in Figure 8. The stone inscription or the epigraph has been successfully segmented based on its
characters and can now be fed to the neural networks to be identified, recognized, and classified.
Figure 6. Image output after smoothing
Figure 7. Line segmented output of handwritten manuscript
Figure 8. Character segmented output of stone inscription
4. CONCLUSION
This paper discusses the importance of ancient script recognition and the challenges it poses,
particularly in the case of the old Kannada script. The proposed solution for ancient scripts consists of various
preprocessing techniques such as gray scaling, binarization, edge detection and cropping, smoothing, line
segmentation, and character segmentation. This technology can be used for the various ancient epigraphs
depending on the noise levels, meaning that all the preprocessing steps need not be performed on all the images.
Because the key motive behind developing this solution was to improve the quality of the image before it is
fed into a recognition model, it can be concluded that scriptures with higher noise levels, or belonging to older
dynasties, may require much more preprocessing than the scriptures which are of low noise levels and
comparatively better quality. The above-mentioned techniques and methodology have been successful in
improving the quality of the image and thereby making it computationally more efficient when fed to the neural
network. This can be used in recognition models for not just ancient Kannada epigraphs but also other epigraphs
or ancient scripts which may be using neural networks such as convolutional neural networks (CNN) or any
machine learning algorithms. The emphasis is likely to be on enhancing accuracy, adaptability, and integration
with other modalities and techniques as ancient Kannada script recognition continues to be essential for a
variety of industries, preservation of knowledge, and culture. With the development of machine learning and
artificial intelligence, we can anticipate seeing more sophisticated preprocessing methods that can recognize
the unique qualities of each image and learn more intricate features from them. These developments are
probably going to increase accuracy rates and make OCR systems more dependable, which will ultimately help
businesses, organizations, and people who use OCR technology for a variety of purposes.

 ISSN: 2088-8708
364
REFERENCES
[1] M. M. Patil and A. R Hanni, “Handwritten Kannada document image processing using optical character recognition,” IOSR Journal
of Computer Engineering, vol. 18, no. 4, pp. 39–47, Apr. 2016, doi: 10.9790/0661-1804063947.
[2] S. Chadha, S. Mittal, and V. Singhal, “Ancient text character recognition using deep learning,” International Journal of Engineering
Research and Technology, vol. 13, no. 9, pp. 2177–2184, Sep. 2020, doi: 10.37624/IJERT/13.9.2020.2177-2184.
[3] G. Kumar and P. Kumar Bhatia, “Analytical review of preprocessing techniques for offline handwritten character recognition,”
in Proceedings of 2nd
International Conference on Emerging Trends in Engineering and Management, 2013, vol. 3, no. 3,
pp. 14–23.
[4] P. Mishra, P. Pai, M. Patel, and R. Sonkusare, “Extraction of information from handwriting using optical character recognition and
neural networks,” in 2020 4th
International Conference on Electronics, Communication and Aerospace Technology (ICECA),
Nov. 2020, pp. 1328–1333, doi: 10.1109/ICECA49313.2020.9297418.
[5] J. Memon, M. Sami, R. A. Khan, and M. Uddin, “Handwritten optical character recognition (OCR): a comprehensive systematic
literature review (SLR),” IEEE Access, vol. 8, pp. 142642–142668, 2020, doi: 10.1109/ACCESS.2020.3012542.
[6] R. Dey, R. C. Balabantaray, S. Mohanty, D. Singh, M. Karuppiah, and D. Samanta, “Approach for preprocessing in offline optical
character recognition (OCR),” in 2022 Interdisciplinary Research in Technology and Management (IRTM), Feb. 2022, pp. 1–6,
doi: 10.1109/IRTM54583.2022.9791698.
[7] S. Joseph and J. George, “Handwritten character recognition of MODI script using convolutional neural network based feature
extraction method and support vector machine classifier,” in 2020 IEEE 5th
International Conference on Signal and Image
Processing (ICSIP), Oct. 2020, pp. 32–36, doi: 10.1109/ICSIP49896.2020.9339435.
[8] M. Brisinello, R. Grbic, M. Pul, and T. Andelic, “Improving optical character recognition performance for low quality images,”
in 2017 International Symposium ELMAR, Sep. 2017, pp. 167–171, doi: 10.23919/ELMAR.2017.8124460.
[9] G. V. S. S. K. R. Naganjaneyulu, A. V. Narasimhadhan, and K. Venkatesh, “Performance evaluation of OCR on poor resolution
text document images using different pre processing steps,” in 2014 IEEE Region 10 Conference, Oct. 2014, pp. 1–4,
doi: 10.1109/TENCON.2014.7022357.
[10] W. Bieniecki, S. Grabowski, and W. Rozenberg, “Image preprocessing for improving OCR accuracy,” in 2007
International Conference on Perspective Technologies and Methods in MEMS Design, May 2007, pp. 75–80,
doi: 10.1109/MEMSTECH.2007.4283429.
[11] C. Chinara, N. Nath, S. Mishra, S. K. Sahoo, and F. A. Ali, “A novel approach to skew-detection and correction of English alphabets
for OCR,” in 2012 IEEE Student Conference on Research and Development (SCOReD), Dec. 2012, pp. 241–244,
doi: 10.1109/SCOReD.2012.6518646.
[12] M. Sarfraz, A. Zidouri, and S. A. Shahab, “A novel approach for skew estimation of document images in OCR system,” in
International Conference on Computer Graphics, Imaging and Visualization (CGIV’05), 2005, pp. 175–180,
doi: 10.1109/CGIV.2005.6.
[13] M. M. Hasan, H. Ali, M. F. Hossain, and S. Abujar, “Preprocessing of continuous Bengali speech for feature extraction,” in 2020
11th
International Conference on Computing, Communication and Networking Technologies (ICCCNT), Jul. 2020, pp. 1–4,
doi: 10.1109/ICCCNT49239.2020.9225469.
[14] A. V. Kottath and S. Shri Bharathi, “Image preprocessing techniques in skin diseases prediction using deep learning: a review,” in
2022 4th
International Conference on Inventive Research in Computing Applications (ICIRCA), Sep. 2022, pp. 1–6,
doi: 10.1109/ICIRCA54612.2022.9985547.
[15] M. I. Shah and C. Y. Suen, “Word spotting in gray scale handwritten Pashto documents,” in 2010 12th
International Conference on
Frontiers in Handwriting Recognition, Nov. 2010, pp. 136–141, doi: 10.1109/ICFHR.2010.28.
[16] P. Ranjitha and T. D. Shreelakshmi, “A hybrid Otsu based Niblack binarization for degraded image documents,” in 2021 2nd
International Conference for Emerging Technology (INCET), May 2021, pp. 1–7, doi: 10.1109/INCET51464.2021.9456150.
[17] B. Vishnudharan and K. Anusudha, “Reclamation of information from degraded and damaged document images by image
binarization method,” in 2017 International Conference on Innovations in Information, Embedded and Communication Systems
(ICIIECS), Mar. 2017, pp. 1–4, doi: 10.1109/ICIIECS.2017.8276100.
[18] R. G. G. Acuna, J. Tao, and R. Klette, “Generalization of Otsu’s binarization into recursive colour image segmentation,” in 2015
International Conference on Image and Vision Computing New Zealand (IVCNZ), Nov. 2015, pp. 1–6,
doi: 10.1109/IVCNZ.2015.7761549.
[19] S. Wang, K. Ma, and G. Wu, “Edge detection of noisy images based on improved canny and morphology,” in 2021 IEEE 3rd
Eurasia Conference on IOT, Communication and Engineering (ECICE), Oct. 2021, pp. 247–251, doi:
10.1109/ECICE52819.2021.9645601.
[20] Y. Li and B. Liu, “Improved edge detection algorithm for canny operator,” in 2022 IEEE 10th
Joint International Information
Technology and Artificial Intelligence Conference (ITAIC), Jun. 2022, pp. 1–5, doi: 10.1109/ITAIC54216.2022.9836608.
[21] P. Li, H. Wang, M. Yu, and Y. Li, “Overview of image smoothing algorithms,” Journal of Physics: Conference Series, vol. 1883,
no. 1, Apr. 2021, doi: 10.1088/1742-6596/1883/1/012024.
[22] B. Gatos, G. Louloudis, and N. Stamatopoulos, “Segmentation of historical handwritten documents into text zones and text lines,”
in 2014 14th
International Conference on Frontiers in Handwriting Recognition, Sep. 2014, pp. 464–469,
doi: 10.1109/ICFHR.2014.84.
[23] K. Mullick, S. Banerjee, and U. Bhattacharya, “An efficient line segmentation approach for handwritten Bangla document image,”
in 2015 Eighth International Conference on Advances in Pattern Recognition (ICAPR), Jan. 2015, pp. 1–6,
doi: 10.1109/ICAPR.2015.7050679.
[24] R. J. Shah and T. V. Ratanpara, “Challenges of broken characters in character segmentation method for Gujarati printed documents,”
in 2015 International Conference on Innovations in Information, Embedded and Communication Systems (ICIIECS), Mar. 2015,
pp. 1–5, doi: 10.1109/ICIIECS.2015.7193263.
[25] A. A. A. Ali and M. Suresha, “An efficient character segmentation algorithm for recognition of Arabic handwritten script,”
in 2019 International Conference on Data Science and Communication (IconDSC), Mar. 2019, pp. 1–6,
doi: 10.1109/IconDSC.2019.8817037.

365
BIOGRAPHIES OF AUTHORS
Anusha Leela Somashekharaiah holds a M.Tech. in signal processing from
Siddaganga Institute of Technology and is currently working as an assistant professor in R V
College of Engineering, Bengaluru, India. Her research interests are image processing and
deep neural network. She Published her work in 15 International Journals, 2 conferences and
so on. She can be contacted at email: anushashekar@rvce.edu.in.
Abhay Deshpande is presently working as an associate professor in the
Department of Electronics and Communication, R.V. College of Engineering, Bengaluru. He
has about 14 years of teaching experience. He has published his work in many International,
National Journals and Conferences. He has reviewed a Book on “Theory of Electromagnetics”
in Pearson Publications and authored Books on “network theory” and “control system”. He is
associate member of The Institute of Engineering, Life member of Indian Society of Technical
Education and Senior member in IEEE. He guided 2 Ph.D. students and presently 4 research
scholars are pursuing under his guidance. He has consultancy projects on robotics and
delivered many technical talks on robotics for industrial automation. He filed Patents in the
Robotics research area. He delivered many lectures as a subject matter expert in VTU
e–Shikshana program. He has been awarded “Young Engineers Award 2020-2021” from The
Institute of Engineering (India). He can be contacted at email: abhayadeshpande@rvce.edu.in.

Preprocessing techniques for recognition of ancient Kannada epigraphs

More Related Content

Similar to Preprocessing techniques for recognition of ancient Kannada epigraphs (20)

More from IJECEIAES (20)

Recently uploaded (20)

Preprocessing techniques for recognition of ancient Kannada epigraphs