![• Setup Mode
• The router enters in to the setup mode if
the NVRAM is empty.
Continue with configuration dialog[yes/no]
Answer with ‘Yes’ or ‘No’.
• User Mode
• Only some basic monitoring
• Limited show commands ping, trace,
• Router>](https://image.slidesharecdn.com/presentation-140514125659-phpapp01-150525020342-lva1-app6892/85/Presentation-CCNA-39-320.jpg)
![Basic Commands
• Setup Mode
• Continue with configuration
dialog?[Yes/No]
• Answer ‘Yes’ or ‘No’.
• User Mode
• Router>
• Router>enable](https://image.slidesharecdn.com/presentation-140514125659-phpapp01-150525020342-lva1-app6892/85/Presentation-CCNA-42-320.jpg)
Presentation CCNA
- 2. Router •Router is a device which makes connection possible between two or more different networks present at same or different geographical locations. •It works on 3rd layer of OSI Model(i.e on network layer) •It does two basic things:. 1. Select the best path from the routing table. 2. Forward the packet on that path.
- 4. Vendors of Router Many companies are manufacturing routers • Cisco • Nortel • Multicom • Juniper • Dlink •3com
- 5. • Cisco is the leading manufacturer of routers and switches.It manufactures 70% of routers and switches of the market.
- 6. 3 level hierarchy Cisco router 1. Access level/layer 2. Distribution level/layer 3. Core level/layer
- 7. Access Layer Routers • Routers which are used by the small organizations and are also known as Desktop routers or company layer routers. • Access layer routers are of low speed, low processing power, low RAM and lower no of ports and are also low price.
- 10. Distribution Layer Routers • Routers which are used by ISP’s and are also known as ISP layer routers. • Distribution layer routers are batter in speed, processing and RAM than access layer routers. • These routers are costly than access layer routers
- 12. 3600 Series Router Front side
- 13. 3600 Series Router Back Side
- 14. Core Layer Router • Routers that are used by the Global ISP’s and are also known as backbone routers. • Core layer routers are best routers than all and are costly routers. Router series 6400,7200,7300,7400,7500,7600,10000, 12000
- 17. Special Series of Routers • Integrated Service Routers/ISR • They just not do routing, can also do security and voice implementation. 800,1800,2800,3800 etc.
- 18. Router Classification Routers are classified in two classes. 1. Fixed Routers 2. Modular Routers
- 19. Fixed Routers • Fixed routers are non upgradable, can not add or remove the Ethernet or serial ports. • Does not have any slot. • In fixed routers the ports are integrated on the mother board.(Fixed on mother board). • Access routers are fixed routers.
- 20. Modular Routers • Modular Routers are upgradable, can add or remove the interfaces as per our requirement. • Number of slots available depends on the series of the router. • Can add LAN and WAN cards. • Router series greater than 2600 are modular routers.
- 21. Ports on Router There are three types of ports on the router. 1. LAN ports 2. WAN ports 3. Administrative Ports
- 22. LAN Ports • The ports where local area network is connected with the router are called LAN ports. • Ethernet ports, fast Ethernet ports, Gig Ethernet ports, 10gbps are LAN ports. • Ethernet 10Mbps • Fast Ethernet 100Mbps • Gig Ethernet 1000Mbps • All Ports are of RJ45 connectors
- 23. LAN Ports
- 24. WAN Ports • Ports that are used for WAN connection/router to router connection are called WAN ports. • WAN ports are serial interfaces(S0,S1,S0/0,S0/1,S0/0/0 etc). • Serial ports are of two category 1. 26pins 2. 60pins
- 25. WAN Ports
- 26. Administrative Ports 1. Console RJ45-Local administrative 2. AuxiliaryRJ45-Remote administrative
- 27. Console Ports • Console ports are known as Local ports • They are generally used for initial confi- guration, password recovery and local administration of the router. • One side of the console port/cable is RJ45 and other is 9pin com port.
- 28. Console Ports • Console ports not carry the traffic like LAN and WAN ports/interfaces, it just carry the commands.
- 29. Auxiliary Ports • Auxiliary ports are known as remote administrative ports. • They are RJ45 ports. • A console or a rollover cable is to be used. • RJ45 to DB-25
- 30. Internal components of router • ROM(Read Only Memory) • POST(Power on self Test) • Mini-IOS • RAM(Random Access Memory) • Flash Memory • NVRAM(Non-Volatile RAM)
- 31. ROM • ROM is a chip integrated on the mother board which contains a bootstrap program which tells how to load the IOS. • Used to start and maintain the router. Holds the POST and Bootstrap program, as well as the mini-IOS.
- 32. POST • Stored in the microcode of the ROM. • Post is used to check the basic functionality of the router hardware and determines which interfaces are present.
- 33. IOS • Internetwork Operating System/IOS. • Operating system inside the router is called IOS. • Different vendors have there own IOS like Cisco IOS, Juniper IOS. • IOS are platform depended e.g Cisco IOS work only with Cisco routers.
- 34. RAM • Hold the temporary configurations, ARP cache, routing tables and are also the software and data structures that allow the router to function. • The IOS is loaded in to the RAM from the flesh at the time of booting.
- 35. Flash Memory • Stores the IOS by default. • Flash memory is not erased when the router is reloaded.
- 36. NVRAM • Hold the router and switch configuration • NVRAM is not erased when the router or switch is reloaded/switched off. • The configuration register is stored in the non-volatile memory. • Configuration means passwords, IP addresses and routing table.
- 37. Internal components of router
- 38. Modes of the Router • Here are different modes of the router • Setup Mode • User Mode • Privileged Mode • Global Configuration Mode • Interface Mode
- 39. • Setup Mode • The router enters in to the setup mode if the NVRAM is empty. Continue with configuration dialog[yes/no] Answer with ‘Yes’ or ‘No’. • User Mode • Only some basic monitoring • Limited show commands ping, trace, • Router>
- 40. • Privileged Mode • Monitoring and some troubleshooting. • All show commands, ping trace, copy and erase • Router# • Global Configuration Mode • To make any change that affect the router like hostname, routing configuration. • Router(config)#
- 41. • Global Configuration Mode • Configurations done on the specific interface. • Router(config-if)# • Rommon Mode • Reverting Password
- 42. Basic Commands • Setup Mode • Continue with configuration dialog?[Yes/No] • Answer ‘Yes’ or ‘No’. • User Mode • Router> • Router>enable
- 43. • Privileged Mode • Router#Show running-config • Router#Show start-config • Router#Show flash • Router#Show version • Router#Show ip interface brief
- 44. • Global Configuration Mode • Router#Configure Terminal • Router(config)#Hostname R-1 • R-1(config)#Show IP route • R-1(config)enable password<password> • R-1(config)enable secret <password>
- 45. • Interface Mode • Router(config)# interface FastEthernet0/0 • Router(config-if)#ip address <ip address> <Subnet Mask> • Rouetr(config)#interface Serial 0/0 • Router(config-if)ip address <ip address> <Subnet Mask>
- 46. Routing • Forwarding the packets from one network to the other network choosing the best path from the routing table. • Routing makes possible for two or more networks to communicate with each other • Routing table only consist of only the best routes for each destination
- 47. Types of routing 1. Static routing 2. Default routing 3. Dynamic routing
- 48. Static Routing • It is configured manually by the administrator. • Mandatory need for the destination network ID • Used for small organizations • In static routing the administrator decide the best path • Administrator should know that what is the destination ID and how many routes to reach that destination
- 49. Advantages • There is no overhead on the router CPU. • There is no bandwidth usage between the routers • It adds security because the administrator can choose to allow routing access to the certain networks only
- 50. Note • In static routing router don’t need any update of the route because the route is pre-defined by the administrator
- 51. Disadvantages • Used for small network(its not feasible in large networks) • Each and every network have to manually configured. • Any change in the network has to be update in all routers.
- 52. Rules to assign the IP address to the router 1. All the LAN and WAN should be in the different networks(or should not repeat the same network). 2. Router Ethernet IP address and the LAN IP address should be in the same network.
- 53. 3.Both the interfaces of routers facing each other should be in the same network. 4.All the interfaces of routers should be in the different network.
- 54. Configuring the Static Routing Router(config)#ip route <Destination Network ID> <Destination Subnet Mask><Next Hop IP address>.
- 55. Thanks
- 56. Presented by: Ali Murtaza Rollno 1689