Honeywell PLC ML 200R ystem architecture &-installation
Download as PPTX, PDF8 likes7,039 views
The document discusses the architecture and installation of the ML-200R PLC system. It provides details on the redundant CPU and power systems, synchronization of data between CPUs, and cable specifications. The installation process involves connecting the required devices like bases, modules, and cables then configuring and testing the system using the provided software.
Honeywell PLC ML 200R ystem architecture &-installation
- 1. ML- 200 & 200R System Architecture SHIVAM SINGH PROJECT ENGINEER +91-8527199116 shivam.technisys@gmail.com
- 2. ML- 200R System Architecture-
- 3. ML- 200 Controller Redundancy- The ML- 200 provides a redundant system for CPU Power IO cable (Ring Topology with dual paths) Redundancy established through a dedicated high speed 1 Gigabit fiber optic link- Control switches from Master CPU to backup CPU within 50 msec and without any bump. Redundancy synchronization comprises of the data and program memory areas.
- 4. ML- 200 Controller Redundancy…. Delay time for Redundant Operation- System data is synchronized between redundant CPU’s every 2.8ms. Redundant Parameter Synchronization- I/Q base: in 1ms for 32 base I/O M area (Internal Memory): in 250us for size of 2KB word R (Retain) area: in 1.5ms for 2KB word PID area (K): in 0.5ms/PID block Automatic Allocated Variable: for 32KB, 2.5ms added
- 5. Power Supply for ML- 200IEC-
- 8. Power Supply For Ml- 200R-
- 11. Types of Communication Modules-
- 12. ML- 200 IEC Main Base- The Main base of ML200-IEC consists of the power module, CPU module, I/O module, special module, and the communication module.
- 13. Ml- 200 IEC Main Base……
- 14. ML- 200 IEC Expansion Base- The expansion base consists of the power module, I/O module, special module, and communication module.
- 15. ML- 200 IEC Expansion Base…..
- 16. ML- 200R Main Base- The main base of ML200R consists of the power module, CPU module, and the communication module (only Ethernet module is allowed in the main base).
- 17. ML- 200R Main Base……
- 18. ML- 200R Expansion Base- ML200R input/output base communication includes expansion base and expansion driver modules. The following are the two types of IO link topology for ML200R. Expansion base without dual IO link redundancy Expansion base with dual IO link redundancy
- 19. Expansion base without dual IO link redundancy- The expansion base of ML200R consists of the power module, expansion driver module, I/O module, special module, and the communication module. (Ethernet module is not allowed in the expansion base).
- 20. Expansion base without dual IO link redundancy-
- 21. Expansion base without dual IO link redundancy-
- 22. Expansion base with dual IO link redundancy- The expansion base of ML-200R consists of the power module, expansion driver module, I/O module, special module, and the communication module. (Ethernet module is not allowed in the expansion base).
- 23. Expansion base with dual IO link redundancy…
- 24. Expansion base with dual IO link redundancy…
- 25. Mixed Topology-
- 26. I/O Interface Module Specification-
- 27. Cable For Ml- 200 IEC-Expansion cable connection- The expansion cables contain high frequency noise. Therefore, to meet the CE conformance standards, attach a ferrite core to the expansion cable
- 28. Cables for ML200R-Expansion cable connection- Expansion cables are Ethernet cables used for connecting the main bases and expansion bases. The expansion cables are classified into the following two categories. Optical Cable Ethernet Cable The electrical and optical cables are provided for use in accordance with the network type.
- 29. Cables for ML200R…… Optical cables- Communication between the optical cables is through Multi Mode Fiber (MMF) 50/65 um LC type cable. In 2MLR systems, cables are used based on the installation site, indoor type, outdoor type, or conduit type.
- 30. Cables for ML200R…… Ethernet cables- Communication between the Ethernet cables is achieved through 100MB twisted pair cables. However, the data transmission in expansion cables is in 10s of micro units. As external noise affects the system performance and control, the Ethernet cables used in ML200R systems must be twisted pair cables such as UTP, FTP, STP, or FSTP cables. The twisted pair cables are known as Cat5 cables. The twisted pair cables are categorized on the following two criteria…..
- 31. Cables for ML200R…… Shielding: It is classified into three types. The following table lists the three types of twisted pair based on the shielding used.
- 32. Cables for ML200R…… Transmission frequency band: Based on the frequency, the twisted cables are classified into the categories listed in the following table.
- 34. Device Configuration- Please ensure that all the required devices are available Essential devices : - Basic/Extension Base, Power module, CPU module, Extension Driver, I/O Modules - Synchronization Cable & Extension Cable - USB Programming Cable - Soft-Master (PLC Configuration & Programming Software)
- 51. System Startup-
- 54. System Check-