presentation by sarim saleem on particle accelerator
- 1. Particle Accelerators By Stephen Lucas The subatomic Shakespeare of St.Neots
- 2. To be able to explain how different particle accelerators work. To be able to explain the role of magnetic fields in particle accelerators. How the magnetic force provides the centripetal force in particle accelerators. Purposes of this presentation…
- 3. Why have particle accelerators? They enable similarly charged particles to get close to each other - e.g. Rutherford blasted alpha particles at a thin piece of gold foil, in order to get the positively charged alpha particle near to the nucleus of a gold atom, high energies were needed to overcome the electrostatic force of repulsion. The more energy given to particles, the shorter their de Broglie wavelength (λ = h/mv), therefore the greater the detail that can be investigated using them as a probe e.g. – at the Stanford Linear Accelerator, electrons were accelerated to high energies and smashed into protons and neutrons revealing charge concentrated at three points – quarks. E = mc2 Colliding particles together, the energy is re-distributed producing new particles. The higher the collision energy the larger the mass of the particles that can be produced.
- 4. The types of particle accelerator Linear Accelerators or a LINAC Cyclotron Synchrotron
- 5. Basic Principles All accelerators are based on the same principle. A charged particle accelerates between a gap between two electrodes when there is a potential difference between them. Energy transferred, Ek = Charge, C x p.d, V Joules (J) Coulombs (C) Volts (V) Ek = QV
- 6. Converting to electron volts 1 eV is the energy transferred to an electron when it moves through a potential difference of 1V. So if a gas molecule has kinetic energy 6.21 x 10-21 J, what is its energy in electron volts? 1eV = 1.60 x 10-19J 1) First, using E = QV, we know that E = 6.21 x 10-21J, and that the charge of an electron is 1.6 x 10-19 C 2) If we divide energy by the charge of an electron, we will have the energy in terms of electron volts. Therefore: 6.21 x 10-21J = 0.0388eV = 3.88 x 10-2eV 1.6 x 10-19 C
- 7. The Linear Accelerator In a Linac, there are a series of tubular electrodes connected to an alternating voltage. The alternating voltage ensures that the voltage of each electrode switches back and forth between positive and negative. 1) When the first electrode is oppositely charged to the entering particle (i.e. an electron or a proton), the particle accelerates towards it. 2) There is no electric field inside the tubes, as they are hollow conductors. When the particle enters the first tube, the voltage is switched so that the next tube is oppositely charged, therefore it accelerates to the next electrode. 3) Each time, the same magnitude of voltage is applied and so the energy of the particle E = n x q x V, is built up in steps without needing to increase the voltage. ^^ An alpha particle being accelerated through a linear accelerator
- 8. Because reading is less fun… Since the frequency of the oscillating voltage is kept constant, the electrode drift tubes must get longer so that the particle takes the same time to travel through each electrode.
- 9. The advantages of a linear accelerator It makes use of an alternating voltage, which means it can easily be stepped up and down using transformers. It is easier and cheaper to build since it does not require magnets to produce a centripetal force by interacting with the charged particle. If it is used in fixed target experiments, the likelihood of collisions is far greater. It does not require the use of high voltages which could cause sparks to jump between the electrodes.
- 10. The disadvantages of a linear accelerator The kinetic energy transferred to the particles is limited since particles can only travel through the accelerating sections once. In order for high energies to be obtained the machines must be made longer and longer and this has cost implications. If the linear accelerator is used to accelerate particles at a fixed target, only the accelerating particle has momentum and kinetic energy. As momentum is always conserved the total momentum cannot be zero before the collision, so the created particles must be moving. This means energy is used up as the kinetic energy of the new particles, rather than the energy used to create the new particle’s mass.
- 11. The Cyclotron The Cyclotron uses a magnetic field to bend charged particles into a circular path so that they can be repeatedly accelerated by the same electric field.
- 12. The Cyclotron 1) Protons leaving the centre are attracted to the negative electrode. 2) The magnetic field bends the proton into a semi-circle. 3) While the proton is travelling this semi- circular path the polarity of the electrodes reverses. When the proton reaches the gap, the electric field accelerates the proton forwards (because it is oppositely charged). 4) As protons complete each semi-circle, and are accelerated across the gap, they gain more and more kinetic energy. 5) The radius of the proton’s path increases in proportion to r = mv/BQ, since it travels faster, the radius of its path increases, and so despite travelling faster, it takes the same time to travel each semi-circle, so the alternating voltage can stay at the same frequency.
- 13. The Advantages of a Cyclotron Particles in a circular accelerator go round many times getting multiple kicks of energy. Higher energies can be achieved using the same voltage but the metal dees do not need to be of great length – Ernest Lawrence achieved a proton energy of 80keV using a cyclotron with a diameter of 11cm! The particles go around many times, so if two oppositely charged particles are accelerated in opposite directions, there are many opportunities for collisions. Colliding beam experiments also have the highest possible collision energy.
- 14. The Disadvantages of a Cyclotron The use of magnets has cost implications. Einstein’s theory of special relativity states that as objects get faster, they get heavier. Therefore if the particles travel close to the speed of light, their mass will increase. As r = mv/BQ, an increase in mass, will cause the particle to have a circular path of a larger radius, therefore it will take longer to reach the gap, making it out of step with the alternating p.d. If two particles of the same mass are accelerated in opposite directions to the same speed, the total momentum before the collision will equal zero, and since Ek = p2/2m, there will be no energy left over for the creation of new particles.
- 15. But where does the centripetal force come from? A particle of charge q, travelling at speed, v, in a magnetic field of magnetic flux density B, perpendicular to the direction of travel, experiences a force, F: F= Bqvsinq The direction of the force is given by Fleming’s Left Hand Rule:
- 16. But why do the moving charges follow a circular path? v F v F v F e- e- e- e- Here we have an electron moving in a magnetic field, where the direction of the magnetic field is into the board. Using Fleming’s left hand rule we can see that the force exerted on the electron, where F = BQv, will act downwards. However, the force is always 90˚ to the charges direction of motion, the force will alter the charges direction of motion, but not alter its speed. If the direction of motion is changed, the force will still act at 90 degrees to the direction of motion, causing circular motion. The BQv force provides the centripetal force.
- 17. Centripetal Force The equation for centripetal force is: If the magnetic force provides the centripetal force then: The equation for magnetic force is: F = BQv r F = mv2 r BQv r Therefore: mv2 = = mv BQ = p BQ BQ r = p
- 18. But how long does it take an electron to make one rotation? v = Δs Δt So: Δ t = Δs v distance speed = The circumference of a circle is 2πr therefore distance = 2πr, and speed is v 2πr v T = But r also equals: p BQ So T = 2 π v x mv BQ 2πm BQ = So the time taken for an electron to make one rotation equals: T = 2πm BQ As you can see, the time taken for an electron, or any charged particle to make a complete rotation a magnetic field of constant magnetic flux density does not depend on speed, a faster moving electron moves a circle of larger radius but takes exactly the same time to complete a circle.
- 19. Worked Exam Question In a cyclotron, protons are accelerated by a high frequency voltage. A uniform magnetic field, of flux density 200mT, causes the protons to follow a circular path that increases in radius as the protons gain kinetic energy. Immediately before the protons leave the cyclotron, the radius of their circular arc is 1.5m. Proton Charge = 1.6 x 10-19C Proton Mass = 1.67 x 10-27kg Magnetic flux density = 200 x 10-3 T Radius = 1.5m Q) Show that the speed of the proton is about 10% the speed of light. The speed of light is 3.0 x 108ms-1, so 10% of that = 0.1 x 3x108ms-1 = 3 x 107ms-1, so our answer should be close to this value. r = mv BQ So v = rBQ m =1.5m x 200 x 10-3T x 1.6x10-19C 1.67 x 10-27kg = 28742514.97ms-1 Close to 10% of the speed of light so it is correct. Huzzah!
- 20. In a cyclotron, protons are accelerated by a high frequency voltage. A uniform magnetic field, of flux density 200mT, causes the protons to follow a circular path that increases in radius as the protons gain kinetic energy. Immediately before the protons leave the cyclotron, the radius of their circular arc is 1.5m. Proton Charge = 1.6 x 10-19C Proton Mass = 1.67 x 10-27kg Magnetic flux density = 200 x 10-3 T Radius = 1.5m Q) Calculate the approximate time taken for the proton to travel around the semicircular Dee. The metal Dee is a semicircle, so its circumference is half 2πr, which leaves πr. Distance is therefore πr. Aforementioned, time = distance velocity = πr v T = π x 1.5m 28742514.97ms-1 = 1.64 x 10-7s The time taken for the proton to travel around one of the semicircular dees is: = 1.64 x 10-7s
- 21. In a cyclotron, protons are accelerated by a high frequency voltage. A uniform magnetic field, of flux density 200mT, causes the protons to follow a circular path that increases in radius as the protons gain kinetic energy. Immediately before the protons leave the cyclotron, the radius of their circular arc is 1.5m. Proton Charge = 1.6 x 10-19C Proton Mass = 1.67 x 10-27kg Magnetic flux density = 200 x 10-3 T Radius = 1.5m Q) Calculate the frequency of the accelerating p.d. Frequency = The number of cycles per second = 1 T If you’ve got any legs left, watch out for the mousetrap here, so far we only have the time taken for half a cycle (180˚), so we need to multiple our value of time by 2. 1 f = 2t = 1 2 x 1.64 x 10-7s = 3 x 106Hz
- 22. The Northern Lights The ‘northern’ lights are caused by charged particles from outer space from solar wind (streams of charged particles expelled from the Sun) being caught in the Earth’s magnetic field and colliding with particles in the Earth’s upper atmosphere. A charged particle in a magnetic field experiences a force, and this force provides the centripetal force. This causes the particles to spiral along the earths magnetic field. As the magnetic field gets stronger at the poles, the radius of the spiralling circular path decreases, since r = mv/BQ and, B is getting larger.
- 23. Radius = 9.3cm = 0.093m B = 3.7 T Mass of helium nucleus = 4u BQ r = p Ek = p2 2m
- 24. r = 0.093 B = 3.7T Mass = 4u = 4 x 1.67 x 10-27 Charge = 2 x 1.6 x 10-19C r = mv BQ v = BQr m v = 3.7T x (2 x 1.6 x 10-19C) x 0.093m 4 x 1.67 x 10-27kg v = 16483832.34ms-1 = 1.64 x 107ms-1 Ek = ½ mv2 Ek = ½ x 6.68 x 10-27 x (1.64 x 107ms-1)2 Ek = 8.98 x 10-13J Divide by 1.6 x 10-19 to get into electron volts: 5.61MeV
- 25. Synchrotron At very high energies, the particles travel close to the speed of light and their motion is now described by relativistic equations and their travel time is no longer the same for each semi-circle. To overcome this, careful synchronisation is needed to make the electrodes change their polarity as the particles pass through each acceleration section. The magnetic field is increased to keep the moving particles in a moving circle of constant radius.
- 26. LHC The LHC is an example of a synchrotron. It accelerates protons to 99.9999% of the speed of light, colliding them at high energies and recording the results on huge computers. But what is the LHC looking for? • The Higgs Boson – this particle decays to produce matter and antimatter. Particle Physicists also want to test the Higgs Mechanism, a theory that suggests a ‘treacle’ fills the universe, slowing down particles which makes them heavy, while not slowing down others such as light. The Higgs mechanism explains how energy is concentrated to produce mass (Sounds like a hump of crap to be honest, who the hell decided this?). • Being closer to the grand unified theory - At extremely high energies (above 1014 GeV), the electromagnetic, weak nuclear, and strong nuclear forces could be fused into a single unified field. So far, physicists have been able to merge electromagnetism and the weak nuclear force into the electroweak force. The LHC could reveal why gravity is so weak in comparison to other fundamental force, or give way to the graviton. • The mystery of antimatter – the big bang should have created matter and antimatter in equal amounts, and yet we are only surrounded by matter. Why didn’t everything annihilate? Where did the antimatter go? •Is Science wrong? – If the LHC does not conclude any results as to the origin of mass, Physicists will have to rethink the standard model and seek new ways of testing the origin of mass. This is a good thing, as proving science wrong, enabled Einstein to predict the perihelion of Mercury using general relativity, where Isaac Newton’s theory of gravity did not work. Most great discoveries were found by accident. • Extra Dimensions – are there extra dimensions that we cannot see? •Dark Matter – what is the nature of dark matter? Dark matter is matter that does not interact with the electromagnetic force, but whose presence can be inferred from gravitational effects on visible matter.
- 27. Disadvantages of the LHC Huge cost implications, the maintenance of keeping supermagnets at -270˚C, constructing tunnels of such length (circumference of 27km) and building a computer network to detect and store information all caused the budget of the LHC to be between 3.2 – 6.4 billion Euros. This required international funding, causing governments from all over the world contributing to the funding of the LHC. Although controversial and not regarded as a real threat, if any of the collisions cause black holes, there is speculation that the earth could be swallowed into a black hole. There is a risk that the Higgs Boson will not be found, and even if it is, there is no guarantee that this will have practical uses in the real world.
- 28. So how are the particles detected? A charged particle moving through matter causes ionisation, the greater the ionisation, the thicker the tracks and the slower the moving particle. Positive and negative particles curve in opposite directions when there is a magnetic field perpendicular to the direction of travel. The greater the momentum, the less curved the tracks. As particles lose energy they spiral inwards. Measuring their curvature allows momentum to be calculated. As particles collide, the ions produced can be accelerated by electric fields and detected, so the path of the particle can be detected.
- 29. So what have we learnt? • To be a good physicist you need a good set of legs. • If you get too close to god’s brain he will smite you. E.g. Hawking