Pressman ch-11-component-level-design

Chapter 11
Component-Level Design
- Introduction
- The software component
- Designing class-based components
- Designing conventional components

(Source: Pressman, R. Software Engineering: A Practitioner’s Approach. McGraw-Hill, 2005)

Background
• Component-level design occurs after the first iteration of the
architectural design
• It strives to create a design model from the analysis and architectural
models
– The translation can open the door to subtle errors that are difficult to find
and correct later
– “Effective programmers should not waste their time debugging – they
should not introduce bugs to start with.” Edsgar Dijkstra

• A component-level design can be represented using some intermediate
representation (e.g. graphical, tabular, or text-based) that can be
translated into source code
• The design of data structures, interfaces, and algorithms should
conform to well-established guidelines to help us avoid the
introduction of errors

3

Defined
• A software component is a modular building block for computer
software
– It is a modular, deployable, and replaceable part of a system that
encapsulates implementation and exposes a set of interfaces

• A component communicates and collaborates with
– Other components
– Entities outside the boundaries of the system

• Three different views of a component
– An object-oriented view
– A conventional view
– A process-related view

5

Object-oriented View
•
•

A component is viewed as a set of one or more collaborating classes
Each problem domain (i.e., analysis) class and infrastructure (i.e.,
design) class is elaborated to identify all attributes and operations
that apply to its implementation
–

•
•

This also involves defining the interfaces that enable classes to
communicate and collaborate

This elaboration activity is applied to every component defined as
part of the architectural design
Once this is completed, the following steps are performed
1)
2)
3)
4)

Provide further elaboration of each attribute, operation, and interface
Specify the data structure appropriate for each attribute
Design the algorithmic detail required to implement the processing
logic associated with each operation
Design the mechanisms required to implement the interface to include
the messaging that occurs between objects

6

Conventional View
•

A component is viewed as a functional element (i.e., a module) of a
program that incorporates
– The processing logic
– The internal data structures that are required to implement the processing
logic
– An interface that enables the component to be invoked and data to be
passed to it

•

A component serves one of the following roles
– A control component that coordinates the invocation of all other problem
domain components
– A problem domain component that implements a complete or partial
function that is required by the customer
– An infrastructure component that is responsible for functions that support
the processing required in the problem domain

(More on next slide)

7

Conventional View (continued)
•

Conventional software components are derived from the data flow
diagrams (DFDs) in the analysis model
–

Each transform bubble (i.e., module) represented at the lowest levels of
the DFD is mapped into a module hierarchy
Control components reside near the top
Problem domain components and infrastructure components migrate
toward the bottom
Functional independence is strived for between the transforms

–
–
–

•

Once this is completed, the following steps are performed for each
transform
1)
2)
3)

Define the interface for the transform (the order, number and types of
the parameters)
Define the data structures used internally by the transform
Design the algorithm used by the transform (using a stepwise
refinement approach)

8

Process-related View
• Emphasis is placed on building systems from existing components
maintained in a library rather than creating each component from
scratch
• As the software architecture is formulated, components are selected
from the library and used to populate the architecture
• Because the components in the library have been created with reuse in
mind, each contains the following:
– A complete description of their interface
– The functions they perform
– The communication and collaboration they require

9

Designing Class-Based
Components

Component-level Design Principles
•

Open-closed principle
– A module or component should be open for extension but closed for modification
– The designer should specify the component in a way that allows it to be extended without the
need to make internal code or design modifications to the existing parts of the component

•

Liskov substitution principle
– Subclasses should be substitutable for their base classes
– A component that uses a base class should continue to function properly if a subclass of the
base class is passed to the component instead

•

Dependency inversion principle
– Depend on abstractions (i.e., interfaces); do not depend on concretions
– The more a component depends on other concrete components (rather than on the interfaces)
the more difficult it will be to extend

•

Interface segregation principle
– Many client-specific interfaces are better than one general purpose interface
– For a server class, specialized interfaces should be created to serve major categories of clients
– Only those operations that are relevant to a particular category of clients should be specified
in the interface

11

Component Packaging Principles
•

Release reuse equivalency principle
– The granularity of reuse is the granularity of release
– Group the reusable classes into packages that can be managed, upgraded,
and controlled as newer versions are created

•

Common closure principle
– Classes that change together belong together
– Classes should be packaged cohesively; they should address the same
functional or behavioral area on the assumption that if one class
experiences a change then they all will experience a change

•

Common reuse principle
– Classes that aren't reused together should not be grouped together
– Classes that are grouped together may go through unnecessary integration
and testing when they have experienced no changes but when other
classes in the package have been upgraded

12

Component-Level Design
Guidelines
• Components
– Establish naming conventions for components that are specified as part of
the architectural model and then refined and elaborated as part of the
component-level model
– Obtain architectural component names from the problem domain and
ensure that they have meaning to all stakeholders who view the
architectural model (e.g., Calculator)
– Use infrastructure component names that reflect their implementationspecific meaning (e.g., Stack)

• Dependencies and inheritance in UML
– Model any dependencies from left to right and inheritance from top (base
class) to bottom (derived classes)
– Consider modeling any component dependencies as interfaces rather than
representing them as a direct component-to-component dependency

13

Cohesion
•
•

Cohesion is the “single-mindedness’ of a component
It implies that a component or class encapsulates only attributes and
operations that are closely related to one another and to the class or
component itself
• The objective is to keep cohesion as high as possible
• The kinds of cohesion can be ranked in order from highest (best) to
lowest (worst)
– Functional
• A module performs one and only one computation and then returns a result

– Layer
• A higher layer component accesses the services of a lower layer component

– Communicational
• All operations that access the same data are defined within one class


14

Cohesion (continued)
• Kinds of cohesion (continued)
– Sequential
• Components or operations are grouped in a manner that allows the first to
provide input to the next and so on in order to implement a sequence of
operations

– Procedural
• Components or operations are grouped in a manner that allows one to be
invoked immediately after the preceding one was invoked, even when no data
passed between them

– Temporal
• Operations are grouped to perform a specific behavior or establish a certain
state such as program start-up or when an error is detected

– Utility
• Components, classes, or operations are grouped within the same category
because of similar general functions but are otherwise unrelated to each other

15

Coupling
• As the amount of communication and collaboration increases between
operations and classes, the complexity of the computer-based system
also increases
• As complexity rises, the difficulty of implementing, testing, and
maintaining software also increases
• Coupling is a qualitative measure of the degree to which operations
and classes are connected to one another
• The objective is to keep coupling as low as possible


16

Coupling (continued)
•

The kinds of coupling can be ranked in order from lowest (best) to
highest (worst)
– Data coupling
• Operation A() passes one or more atomic data operands to operation B(); the
less the number of operands, the lower the level of coupling

– Stamp coupling
• A whole data structure or class instantiation is passed as a parameter to an
operation

– Control coupling
• Operation A() invokes operation B() and passes a control flag to B that directs
logical flow within B()
• Consequently, a change in B() can require a change to be made to the meaning
of the control flag passed by A(), otherwise an error may result

– Common coupling
• A number of components all make use of a global variable, which can lead to
uncontrolled error propagation and unforeseen side effects

– Content coupling
• One component secretly modifies data that is stored internally in another
component

17

Coupling (continued)
• Other kinds of coupling (unranked)
– Subroutine call coupling
• When one operation is invoked it invokes another operation within side of it

– Type use coupling
• Component A uses a data type defined in component B, such as for an instance
variable or a local variable declaration
• If/when the type definition changes, every component that declares a variable
of that data type must also change

– Inclusion or import coupling
• Component A imports or includes the contents of component B

– External coupling
• A component communicates or collaborates with infrastructure components
that are entities external to the software (e.g., operating system functions,
database functions, networking functions)

18

Conducting Component-Level Design
1)

Identify all design classes that correspond to the problem domain as defined
in the analysis model and architectural model
Identify all design classes that correspond to the infrastructure domain

2)
•
•

1)

These classes are usually not present in the analysis or architectural models
These classes include GUI components, operating system components, data
management components, networking components, etc.

Elaborate all design classes that are not acquired as reusable components
a)
b)
c)
d)

Specify message details (i.e., structure) when classes or components collaborate
Identify appropriate interfaces (e.g., abstract classes) for each component
Elaborate attributes and define data types and data structures required to
implement them (usually in the planned implementation language)
Describe processing flow within each operation in detail by means of pseudocode
or UML activity diagrams


19

Conducting Component-Level
Design (continued)
4)

Describe persistent data sources (databases and files) and identify the
classes required to manage them
Develop and elaborate behavioral representations for a class or component

5)
•

4)

This can be done by elaborating the UML state diagrams created for the analysis
model and by examining all use cases that are relevant to the design class

Elaborate deployment diagrams to provide additional implementation detail
•

4)

Illustrate the location of key packages or classes of components in a system by
using class instances and designating specific hardware and operating system
environments

Factor every component-level design representation and always consider
alternatives
•
•

Experienced designers consider all (or most) of the alternative design solutions
before settling on the final design model
The final decision can be made by using established design principles and
guidelines

20

Designing Conventional
Components

Introduction
•

Conventional design constructs emphasize the maintainability of a
functional/procedural program
– Sequence, condition, and repetition

•
•

Each construct has a predictable logical structure where control enters
at the top and exits at the bottom, enabling a maintainer to easily
follow the procedural flow
Various notations depict the use of these constructs
– Graphical design notation
• Sequence, if-then-else, selection, repetition (see next slide)

– Tabular design notation (see upcoming slide)
– Program design language
• Similar to a programming language; however, it uses narrative text embedded
directly within the program statements

22

Graphical Design Notation
F

T

Sequence

If-then-else

T
F
F

F

T
T
T

F

Selection

Repetition

23

Graphical Example used for Algorithm Analysis

1
2
3

4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9

while (x <= (y * y))
{
if ((x % 11 == 0) &&
(x % y == 0))
{
printf(“%d”, x);
x++;
} // End if
else if ((x % 7 == 0) ||
(x % y == 1))
{
printf(“%d”, y);
x = x + 2;
} // End else
printf(“n”);
} // End while

0
1
2

printf("End of listn");
return 0;
} // End functionZ

3

int functionZ(int y)
{
int x = 0;

4
6
12

7

13

9
10

15
16
18
20
21
24

Tabular Design Notation
1)
2)
3)
4)

List all actions that can be associated with a specific procedure (or
module)
List all conditions (or decisions made) during execution of the
procedure
Associate specific sets of conditions with specific actions,
eliminating impossible combinations of conditions; alternatively,
develop every possible permutation of conditions
Define rules by indicating what action(s) occurs for a set of
conditions


25

Tabular Design Notation
(continued)
Rules
Conditions

1

2

Condition A

T

T

Condition B
Condition C

F

3

4
F

T

T

T

Actions
Action X






Action Y
Action Z




26




Pressman ch-11-component-level-design

More Related Content

What's hot (20)

Viewers also liked (20)

Similar to Pressman ch-11-component-level-design (20)

Recently uploaded (20)

Pressman ch-11-component-level-design