Abstract image of a woman sitting on books and studying on a laptop

ProcContSite

C
Clyde Porter

This document provides an electrical one-line diagram and panel schedule for a site. The one-line diagram shows the electrical infrastructure including a 480V utility service entrance, 480V/277V and 208V/120V transformers, generator, panels, lighting, and equipment. The panel schedule lists details for panel PP-01 including its location, voltage, phase, wiring, ampere rating, and circuit information.

1 of 61
Downloaded 16 times
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
Utility Pole M Meter Enclosure 300KVA Pri: 12,470 Sec: 480Y/277 34 k AIC UTILITY CUSTOMER CONNECTION FOR STANDBY GENERATOR MTS-01 MANUAL TRANSFER SWITCH SERVICE ENTRANCE RATED 6-250kcmil + 2-1/0 GND 2-2.5" Conduit SURGE SUPPRESSION 6-250kcmil + 1/0 N + 1/0 GND 2-2.5" CONDUIT 1/0 AWG GND 45KVA Pri: 480V Sec: 208Y/120V1/2" CONDUIT (TYP) PP-01 480Y/277 PANELBOARD 600 AMP SITE LIGHTING PC 3 - #4 + #8 GND 1" CONDUIT 3 - 250 kcmil + #4 GND 2.5" CONDUIT PB-01 208Y/120V PANEL BOARD Ii=38.9A Io=43A Ii=38.9A Io=43A SC 93101 SC 93102 3 - #10 + #10 GND 3/4" CONDUIT 35-50A 3P 3 - 2/0 + 2/0 N + #6 GND 2" CONDUIT CLASS 1 DIVISION 1 GROUP D AREA CP-01 480V CONTROL PANEL M M M M 3 #18 AWG 0.5A 3P CONTROL BUILDING CONTROL BUILDING HEAT PUMP 12.6 kVA 60.7 FLA ATTENDANT BUILDING HEAT PUMP 12.6 kVA 60.7 FLA SUMP PUMP 1 SUMP PUMP 2 ATS-01 240/120V (AUTO TRANSFER SWITCH) PANEL BOARD CONTROL BUILDING LIGHTING CONTROL BUILDING UPS SITE LIGHTING 3 - #6 AWG +1- #8 AWG GND 1" CONDUIT GENERATOR 11 kW 45.8 FLA 3 - #10 + #10 GND 3/4" CONDUIT 3 - #6 + #10 GND 3/4" CONDUIT 3 - #6 + #10 GND 3/4" CONDUIT 2 #12 AWG + 1 #14 AWG GND 1/2" CONDUIT 2 #14 AWG + 1 #14 AWG GND 1/2" CONDUIT 2 - #6 AWG + 1 #8 AWG GND 3/4" CONDUIT 2 - #12 AWG + 1 #12 AWG GND 1/2" CONDUIT PB-02 120 V SUB-PANEL ATS-02 ATS SUB-PANEL ATTENTANT BUILDING OUTLETS ATTENDANT BUILDING LIGHTING COMPUTER UPS OUTLET 2 #14 AWG + 1 #14 AWG GND 1/2" CONDUIT 2 #12 AWG + 1 #12 AWG GND 1/2" CONDUIT 2 #12 AWG + 1 #12 AWG GND 1/2" CONDUIT 2 #14 AWG + 1 #14 AWG GND 1/2" CONDUIT 2 #14 AWG + 1 #14 AWG GND 1/2" CONDUIT ATTENDANT BUILDING SUB-PANEL 2 #6 AWG + 1 # 6 AWG + #10 GND 1/2" CONDUIT CONTROL BUILDING AIR HANDLER ATTENDANT BUILDING AIR HANDLER ATTENDANT BUILDING SUB-PANEL 2 #6 AWG + 1 # 6 AWG + #10 GND 1/2" CONDUIT ATTENDANT BUILDING IT CABINET SUPPLY ATTENTANT BUILDING OUTLETS 2 #12 AWG + 1 #12 AWG GND 1/2" CONDUIT SERVICE POINT ATTENTANT BUILDING OUTLETS 2 #14 AWG + 1 #14 AWG GND 1/2" CONDUIT 2 #12 AWG + 1 #12 AWG GND 1/2" CONDUIT G PC MLO MLO 35-50A 3P 30A 3P MLO MAIN GATE OPERATOR (EXIT) 2 #12 AWG + 1 #12 AWG GND 1/2" CONDUIT WILLIAMS GATE OPERATOR 2 #12 AWG + 1 #12 AWG GND 1/2" CONDUIT MLO MAIN GATE OPERATOR (ENTER) 2 #12 AWG + 1 #12 AWG GND 1/2" CONDUIT Note 1 Note 1 Note 1 Note 1 30A 3P FIRE/SAFETY PANEL 2 #14 AWG + 1 #14 AWG GND 1/2" CONDUIT CTP01 CTP01 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E2-01_One-Line.dwg POWER DISTRIBUTION ONE-LINE / SCHEMATIC E2-01.01 NTS 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
SITE GROUNDING PLAN SCALE 1/32" - 1'-0"LEGEND GROUND ROD EXOTHERMIC WELD BOLTED COMPRESSION COUPLING LIGHTNING ROD GROUNDING PLAN SITE LAYOUT E2-02.01 1/32" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E2-02_Ground.dwg 2 E2-02.02 3 E2-02.02 2 E2-02.04 1 E2-02.03 1 E2-02.02 (2) 20 GAL. PROPANE TANKS AIR TANK 11 kVA GENERATOR 480Y/277 V TRANSFORMER 208Y/120 V TRANSFORMER CONTROL BUILDING HEAT PUMP ATTENDANT BUILDING HEAT PUMP DISPERSION FENCE SECURITY FENCE PROPERTY LINE DISPERSION FENCE GENERAL NOTE: 1. SEE SHEET E2-02.04 FOR NOTES 2. SEE SHEET E2-02.04 FOR CADWELD TYPES 3. SEE SHEET E2-02.04 FOR PARTS LIST 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
TANK AREA EARTH GROUNDING PLAN SCALE 1/8" - 1'-0" LEGEND GROUND ROD EXOTHERMIC WELD BOLTED COMPRESSION COUPLING GROUNDING ENLARGED PLAN E2-02.02 1/8" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E2-02_Ground.dwg 4 E2-02.04 1 2 1 2 1 2 1 1 2 2 2 TO EQUIPMENT BUILDING TO METERING SKID 1 3 E2-02.04 4 E2-02.03 20' 2 E2-02.04 TO LAMP POLE GENERAL NOTE: 1. SEE SHEET E2-02.04 FOR NOTES 2. SEE SHEET E2-02.04 FOR CADWELD TYPES 3. SEE SHEET E2-02.04 FOR PARTS LIST 3 E2-02.04 1 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
GROUNDING ELEVATION / DETAILS E2-02.03 1/8" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E2-02_Ground.dwg 2' MIN #2 SOLID BARE TINNED COPPER TO GROUND ROD OR GROUND RING PER PLAN 1" PVC ON FACE OF CONCRETE SECURE PER CODE CADWELD GROUND STRAP BETWEEN GATE AND POST 1" PVC EMBEDDED IN CONCRETE #2 SBTC 5/8" x 10' GND ROD 2 LAMP POST GROUNDING SCALE 1/4" - 1'-0" 3 SWING GATE GROUNDING SCALE 1/4" - 1'-0" 5/8" x 10' GND ROD 2' MIN 4 TYPICAL SKID GROUNDING SCALE 1/2" - 1'-0" #2 SBTC TO GROUND RING 2 HOLE COMPRESSION LUG SS BOLT, NUT & STAR LOCK WASHER REMOVE PAINT AND APPLY ANTI-OXIDIZING COMPOUND PVC PIPE EMBEDDED IN CONCRETE BUILDING EARTH GROUNDING PLAN SCALE 1/8" - 1'-0" CLEAN GROUND FOR PROCESS INTERFACE BUILDING 1 1 TO TANK AREA 2 2 1 2 2 2 2 1 2 TO DC GROUND BAR IN PROCESS INTERFACE BUILDING 20' 1 LEGEND GROUND ROD EXOTHERMIC WELD BOLTED COMPRESSION COUPLING GENERAL NOTE: 1. SEE SHEET E2-02.04 FOR NOTES 2. SEE SHEET E2-02.04 FOR CADWELD TYPES 3. SEE SHEET E2-02.04 FOR PARTS LIST 1 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
TANK 902 / 92202 TANK 901 / 92102 TANK 903 / 92302 Type GY Type TA Type SS Type VB Type VS GROUNDING ELEVATION / DETAILS E2-02.04 1/8" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E2-02_Ground.dwg 3 LNG TANK BASE GROUNDING (TYP) SCALE 1/4" - 1'-0" 2 TO GROUND RING PVC PIPE ON FACE OF CONCRETE SECURE PER CODE EXOTHERMIC WELD 2 TO GROUND RING PVC PIPE ON FACE OF CONCRETE EXOTHERMIC WELD 2 LNG TANK SKID GROUNDING (TYP) SCALE 1/4" - 1'-0" EXOTHERMIC WELD #2 SBTC 1' PVC ON FACE OF CONCRETE (TYPICAL EACH FRAME) BOND CONDUIT TO GROUND RING (TYPICAL) BOND RIO FRAME TO STEEL FRAME 4 LNG TANK PROCESS EQUIPMENT FRAME GROUNDING SCALE 1/2" - 1'-0" BOND CABLE TRAY TO STEEL FRAME (TYPICAL EACH FRAME SUPPORT) A CADWELD TYPE GR ERICO B CADWELD TYPE GT ERICO C CADWELD TYPE GY ERICO D CADWELD TYPE TA ERICO E CADWELD TYPE SS ERICO F CADWELD TYPE VB ERICO G CADWELD TYPE VS ERICO H CADWELD TYPE HA ERICO J CADWELD TYPE PG ERICO EXOTHERMIC WELD TYPES NOTE: SEE ERICO CADWELD APPLICATION GUIDE FOR PROPER MOLD AND WELD METAL INFORMATION 1 PARTS LIST ITEM MATERIAL QTY PART NUMBER MFG 1 2/0 STRANDED BARE TINNED COPPER A/R 2 #2 SOLID BARE TINNED COPPER A/R 3 GROUNDING STRAPS A/R 99-N1 B-LINE 4 5/8" X 10' COPPER CLAD GROUND RODS A/R 5 1" DIA PVC PIPE A/R 6 GROUNDING CLAMP, RIGID CONDUIT A/R 7 ANTI OXIDIZING COMPOUND, CU/STL A/R 8 ANTI-OXIDIZING COMPOUND, CU/ALU A/R 9 10 NOTE: 1. FOLLOW ALL LOCAL CODES FOR GROUNDING ALL DEVICES 2. PARTS LIST ON SHT E2-02.02 3. REMOVE PAINT AND USE OXIDATION PROHIBITING COMPOUND ON ALL MECHANICAL CONNECTIONS 4. TOP OF GROUND ROD TO BE 24" MIN. BELOW GRADE 5. GROUND RODS TO BE PLACED 20' ON CENTER MAX. JUMPER CABLE TRAY (TYPICAL) 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
PANEL SCHEDULE PANEL PP-01 VOLTS 480/277 PHASE 3 WIRE 4 CAT. NO. LOCATION CONTROL BUILDING MOUNTING FLUSH SURFACE FEED TOP BOTTOM MAINS AMPERE RATING600 LUGS ONLY AMP BKR. FEEDER CKT NO. AMPS POLE DESCRIPTION WATTS LOAD A B C WATTS DESCRIPTION CKT NO. POLE AMPS 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 20 3 3 ----- ----- SITE LIGHTNING ----- ----- SITE LIGHTING ----- -K - - - - - - 45KVA TRANSFORMER ----- ----- ----- SITE LIGHTING SPARE ----- 023 100 04 06 083 20 10 12 143 20 16 18 20 22 24 26 28 30 TOTALS: AMPS PER PHASE -- --- -- TOTAL WATTS ---K AVERAGE AMPS --- NOTES: 1. PANEL LP-01 SHALL BE WITHIN 25 FT. OF THE 45KVA TRANSFORMER. 2. ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR CONDUITS AND WIRING INSIDE OF CONTROL BUILDING FOR LIGHTS, OUTFITS, HVAC, NETWORK PANEL, F.A.C.P., ETC... -K -K -K -K -K -K -K -K -K -K -K -K -K -K -K -K -K -K -K - - - - - - - - - - - - - - - - - - - - - - - - -K -K -K -K -K -K -K -K -K -K ----- ----- ----- ----- ----- ----- X 20 ----- ----- ----- ----- X FEEDER MAIN 480v PANEL MAIN 120/208v PANEL CONTROL BUILDING CONDUIT 1 - 2" CIRCUIT NO. WIRE 3- 2/0, 1- 2/0 N / 1- #6 G CONDUIT 2- 2-1/2" CIRCUIT NO. WIRE 6- 250, 1/0 N, 1/0 G 250 3 PUMP OPERATOR PANEL CP-01 ----- ----- ----- PANEL SCHEDULE PANEL ATS-01 VOLTS 240/120 PHASE 1 WIRE 3 CAT. NO. LOCAL ATTENDANT BUILDING MOUNTING FLUSH SURFACE FEED TOP BOTTOM 200 MAINS AMPERE RATING LUGS ONLY 100 AMP BKR. FEEDER CONDUIT 1 - 1" CIRCUIT NO. WIRE 2- #6 / 1- #6 G CKT NO. AMPS POLE DESCRIPTION WATTS LOAD L1 WATTS DESCRIPTION CKT NO. POLE AMPS SITE LIGHTING01 03 05 07 09 11 13 02 04 06 08 10 12 14 TOTAL AMPERES - - - TOTAL WATTS - AVERAGE AMPS - X X ----- ATTENDANT BUILDING SUB-PANEL ----- -K -K -K -K -K -K -K -K -K -K -K -K -K -K - - 1 20 CONTROL BUILDING LIGHTING ----- ----- CONTROL BUILDING UPS RECEPTACLE ----- L2 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 240/120V ATS PANEL CONTROL BUILDING PANEL SCHEDULE PANEL PB-01 AIC 10K VOLTS 208Y/120 PHASE 3 WIRE 4 CAT. NO. CONTROL BUILDING MOUNTING FLUSH SURFACE FEED TOP BOTTOM 200 MAINS AMPERE RATING LUGS ONLY 175 AMP BKR. CKT NO. AMPS POLE DESCRIPTION LOAD VA LOAD A B C WATTS DESCRIPTION CKT NO. POLE AMPS ATTENDANT BUILDING HEAT PUMP 01 03 05 07 09 11 13 15 17 02 04 06 08 10 12 14 16 18 TOTALS: AMPS PER PHASE - - - TOTAL WATTS - AVERAGE AMPS - X X SUMP PUMP #1 P93130 ATS ATS -K - - - - -K -K -K -K -K -K -K -K -K -K -K -K -K -K -K -K -K - - - - - - 80 - 2 80 SUMP PUMP #2 P93131 80 2 1 15 20 2 - 80 20 - 2 70 20 1 - 70 40 2 2 20 40 - - 20 15 2 60 15 - 60 120v ATS SUB PANEL ATTENDANT BUILDING AIR COMPRESSOR AUTO DRAIN CONTROL BUILDING HEAT PUMP SUMP PUMP #1 P93130 SUMP PUMP #2 P93131 1 15 1 15 1 20 60 2 60 - 15 1 PANEL SCHEDULE PANEL ATS-02 VOLTS 240/120 PHASE 1 WIRE 3 CAT. NO. LOCAL ATTENDANT BUILDING MOUNTING FLUSH SURFACE FEED TOP BOTTOM 200 MAINS AMPERE RATING LUGS ONLY 60 AMP BKR. FEEDER CONDUIT 1 - 1" CIRCUIT NO. WIRE 2- #6 / 1- #6 G CKT NO. AMPS POLE DESCRIPTION WATTS LOAD L1 WATTS DESCRIPTION CKT NO. POLE AMPS 01 03 05 07 09 11 13 02 04 06 08 10 12 14 TOTAL AMPERES - - - TOTAL WATTS - AVERAGE AMPS - X X ----- ---- ----- ----- -K -K -K -K -K -K -K -K -K -K -K -K -K -K - - 1 20IT CABINET SUPPLY ATTENDANT BUILDING LIGHTING ----- ----- UPS - OUTLET ----- L2 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 1 1 15 20 - - - - ATTENDANT BUIL;DING HEAT PUMP - - - - - - - - CONTROL BUILDING HEAT PUMP SPARE SPARE ATTENDANT BUILDING SUB-PANEL PB4 OUTLETS HVAC AIR HANDLER ATTENDANT BUILDING SUB-PANEL PB4 OUTLETS ATTENDANT BUILDING SUB-PANEL - - - - - -- - - - - - ----- ----- ----- ----- 120v SUB PANEL ATTENDANT BUILDING PANEL SCHEDULE PANEL PB-02 VOLTS 120 PHASE 1 WIRE 3 CAT. NO. LOCAL ATTENDANT BUILDING MOUNTING FLUSH SURFACE FEED TOP BOTTOM 200 MAINS AMPERE RATING LUGS ONLY 60 AMP BKR. FEEDER CONDUIT 1 - 1" CIRCUIT NO. WIRE 2- #6 / 1- #6 G CKT NO. AMPS POLE DESCRIPTION WATTS LOAD L1 WATTS DESCRIPTION CKT NO. POLE AMPS 01 03 05 07 09 11 13 02 04 06 08 10 12 14 TOTAL AMPERES - - - TOTAL WATTS - AVERAGE AMPS - X X ---- ----- ----- -K -K -K -K -K -K -K -K -K -K -K -K -K -K 1 20 OUTLETS ----- ----- ----- L2 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 1 15 1 15 1 20- - - - 15 1 1 1 20 1 - - - - - - - - - - - - - - ----- ----- OUTLETS OUTLETS HVAC AIR HANDLER20 1 ----- ----- - - - - - - - - - - - - ----- ----- 45 kVA TRANSFORMER WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E2-03_Panel_Schedule.dwg PANEL SCHEDULES E2-03.01 NTS CODE DESCRIPTION LIGHTING LOADS L RECEPTACLES R MOTOR LOAD M DEDICATED RECEPTACLES S HVAC H MISC Z 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
EQP CONTROLLER 'DELTRONICS' L N GND T1-65 T1-66 FIRE ALARM T1-71 T1-72 HI-HI-FAS 42 C+ 41 C+ 5880 INPUT MODULE A B S+ S- FIRE ALARM CONTROL PANEL (FACP) 'SILENT KNiGHT' SBUS + - TELCO 2 TELCO 1 CONTROL PANEL LP01 120/208V RING TIP S+ S- +24V GND IP COMMUNICATOR EMERGENCY PHONE THIS PANEL IS EQUIPPED WITH AUTODIALER(S) WIRELESS MODEM NETWORK PANEL DS1 LINE TO UL CENTRAL STATION AND LOCAL FIRE DEPARTMENT NOTES: 1. THE SAFETY PLC PANEL MONITORS THE FLAME SENSORS (FIRE EYES). IT SENDS AN ALARM SIGNAL TO THE FIRE ALARM CONTROL PANEL (FACP) AND THE PUMP OPERATOR PANEL (POP) IN THE EVENT A FIRE IS DETECTED. THE FACP, IN TURN, MONITORS THIS SIGNAL FROM THE SAFETY PLC AS WELL AS SIGNALS FROM THE SMOKE DETECTORS AND FIRE ALARMS. 2. THE FACP ACTIVATES A LOCAL STROBE LIGHT & HORN AND TRANSMITS A SIGNAL TO THE NETWORK PANEL AND ON TO A UL CENTRAL STATION AND THE LOCAL FIRE DEPARTMENT IF A FIRE IS DETECTED BY ANY OF THE SOURCES IDENTIFIED IN NOTE 1. THIS SIGNAL FROM THE NETWORK PANEL IS REDUNDANT AND IS SENT VIA A T1 LINE (PRIMARY) OR WIRELESS MODEM (SECONDARY) USING AN AUTODIALER. 3. THE SAFETY PLC PANEL ALSO MONITORS THE GAS DETECTORS. IT ACTIVATES A LOCAL STROBE LIGHT & HORN (@ 20% LEL OR HIGHER) AND SENDS A SIGNAL TO THE PUMP OPERATOR PANEL (POP) (@ 40% LEL OR HIGHER) IN THE EVENT OF A GAS LEAK THAT CAUSES THE INDICATED GAS CONCENTRATIONS. 4. THE PUMP OPERATOR PANEL (POP) MONITORS THE INDICATED SIGNALS FROM THE SAFETY PLC PANEL AS WELL AS THE EMERGENCY STOP PUSHBUTTONS (ES) AND SHUTS STRATEGICALLY SELECTED SYSTEMS WHEN ANY ONE OF THE LISTED ITEMS IS ACTIVATED. 5. SEE DRAWING 12225-E-600, SH 1 FOR LOCATIONS OF THE FIRE EYES, GAS DETECTORS AND EMERGENCY STOP PUSHBUTTONS. 6. AN EMERGENCY PHONE IS LOCATED ON SITE AT THE CONTROL BUILDING. IT IS CONNECTED TO THE UL CENTRAL STATION VIA THE NETWORK PANEL AND A PHONE LINE USING AN AUTODIALER. COM 09 14 15 23 24 TO AP CAT 6 16/4 FPLP CAT 6 CAT 6 CAT 6 CAT 6 CAT 6 16/2 FPLP CAT 6 HS 90001 HS 90001 HS 90001 HS 90001 HS 90001 HS 90001 E-STOP E-STOP E-STOP E-STOP E-STOP E-STOP GS AT-90052 B GENERAL STATION ALARM LIGHT 7' OVDC + - 104 24V DC 7 XA 1.1 MODULE BELDEN 9316 T1-57 T1-58 + - W HIGH GAS STROBE LIGHT & HORN FIRE ALARM STROBE LIGHT & HORN (PR2K) R GS AT-90051 FE AT-90002 GS AT-90053 GS AT-90054 FE AT-90003 AT-90055 FE AT-90001AT-90004 FE GS AT-90058 GS AT-90057 AT-90056 GS GS IDP- PULL STATION IDP- PHOTO SMOKE 1 IDP- PHOTO SMOKE 2 SMOKE DETECTORS & FIRE ALARM PULL HANDLE SLC OUT + - BACKUP BATTERY WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E2-10_FIREPANEL.dwg FIRE / SECURITY PANEL BLOCK DIAGRAM E2-10.01 NTS BELDEN 3073F COMM BELDEN 9367 POWER 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
ETHERNET WAN [CAT6+] ETHERNET LAN [CAT6+] CONTROLNET NETWORK INTRINSICALLY SAFE CONTROLNET NETWORK FIBER NETWORK MODBUS [RS485] MODBUS [TCPIP] NOTES & LEGEND GENERAL NOTES LEGEND DETAILS 1. XXX WORKSTATION WITH DUAL 21.50" FLAT SCREEN LCD, CORE I5, RAID1, WINDOWS 7 PROFESSIONAL. CONTROL SYSTEM SOFTWARE PROVIDED: 1. FACTORY TALK VIEW SE STATION SOFTWARE WILL BE USED AS THE CONTROL INTERFACE. RUNTIME LICENSE PROVIDED (NO DEVELOPMENT) 2. AB RSLOGIX5000 V.20, AND ASSOCIATED SOFTWARE, WILL BE USED FOR PROGRAMMING THE PLC. 2. XXX WORKSTATION WITH DUAL 21.5" FLAT SCREEN LCD, CORE I5, RAID1, WINDOWS 7 PROFESSIONAL. SYSTEM SOFTWARE PROVIDED: 1. XXX HMI SOFTWARE WILL BE USED AS THE CONTROL INTERFACE. 3. SCADA2 IS REQUIRED TO BE ACCESSIBLE FROM THE INTERNET [MANDATORY]. 4. THE CONTROL BUILDING WILL HOUSE THE MAIN CONTROL PANEL, TO INCLUDE: AN ALLEN-BRADLEY COMPACTLOGIX PLC SYSTEM WITH COMMUNICATION AND NETWORK MODULES ADDITIONALLY, THE BUILDING WILL HOUSE: IT CABINET, FIRE PROTECTION PANEL, VARIABLE FREQUENCY DRIVES AND A LOCAL UPS POWER SOURCE. 5. CONTROLNET NETWORK (NON-REDUNDANT) IS DIVIDED INTO TWO NETWORKS, NON-INTRINSICALLY SAFE AND INTRINSICALLY SAFE. 6. REMOTE IO PANELS WILL HOUSE FLEX EX/IO (INTRINSICALLY SAFE) REMOTE, CONNECTED TO THE MAIN CHASSIS VIA THE INTRINSICALLY SAFE CONTROLNET NETWORK. 7. THE OFFICE BUILDING WILL HOUSE THE LOCAL SCADA SYSTEM AS WELL AS THE INTERFACE FOR TRUCK LOADING. 1. REFERENCE HARDWARE & SOFTWARE SPECIFICATION DOCUMENT FOR FURTHER DETAILS. FIBER BRIDGE PLC FIBER NETWORK DIAGRAM Unload VFD #1 Unload VFD #2 Truck Scale #1 EQP DELTRONICS SAFETY PANEL CONTROLNET ADAPTER 1734-ACNR Truck Scale #2 RIO #1 RIO #2 75 OHM LOAD 75 OHM LOAD IS BARRIER 1797-BCNR CONTROL NET ETHERNET WAN 1797 -ACNR15 1797 -ACNR15 NODE 6 COMPACT LOGIX 1768-ENBT DE-MARK (T-1) DS1 1.54 Mbps SCADA1 SCADA2 FIRE PROTECTION PANEL IT SWITCH 192.168.0.0 SECURITY PANEL UPS CONTROL BLDG 192.168.0.0 WIRELESS MODEM ETHERNET LAN IS CONTROL NET 192.168.0.0192.168.0.0192.168.0.0192.168.0.0192.168.0.0 NETWORK PRINTER AUTO- DIALER 192.168.0.0192.168.0.0 NODE 0 NODE 5 NODE 4 NODE 3 NODE 2 NODE 1 NODE 8 NODE 9 NODE 7 TOP TECH TMS6 192.168.0.0 UPS ATTENDANT BLDG 192.168.0.0 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E3-00_SystemControlTopology.dwg SYSTEM CONTROL TOPOLOGY E3-00.01 NTS 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
2 1 78 6543 USA IN MADE 6.50 FRONT VIEW SCALE= 1:4 CONTROL PANEL EQUIPMENT LAYOUT BOM E4-00.01 NTS A INTERIOR PANEL LAYOUT SCALE= 1:4 B 8 9 10 11 13 14 12 17 18 7 21 24 47 52 23 9 26 25 22 28 50 43 42 27 41 49 51 33 29 1 1. 1 PANEL 36 X 36 X 8 SCE-36EL3608LP SAGINAW 2. 1 SUB PANEL SCE-36P36 SAGINAW 3. 1 EL, MOUNTING FEET KIT (Not Shown) SCE-ELMFK4 SAGINAW 4. A/R DIN RAIL 35mm x 15mm 5. A/R WIRE WAY 1-1/2 x 3 T1-1530G AUTOMATION DIRECT 6. 1 GROUND BAR, 6 PORT UBG2/0-414-6 PANDUIT 7. 1 MAIN GROUND LUG CLMAR2/0-14Q PANDUIT 8. 1 ENET SWITCH 5 PORT SE-SW 5U AUTOMATION DIRECT 9. 2 CONTROLNET, Y TAP 1786-TPSYR ALLEN BRADLEY 10. 1 COMPACT LOGIX, PWR SUPPLY 1768-PA3 ALLEN BRADLEY 11. 1 COMPACT LOGIX, L4X BRIDGE 1768-ENBT ALLEN BRADLEY 12. 1 CONTROLNET BRIDGE MODULE 1768-CNB ALLEN BRADLEY 13. 1 COMPACT LOGIX, L43 PROCESSOR 1768-L43 ALLEN BRADLEY 14. 1 R-END CAP 1769-ECR ALLEN BRADLEY 15. 1 PHASE MONITOR, SPDT 208/480 PMRU-1C-480A AUTOMATION DIRECT 16. 1 RELAY SOCKET 70169-D AUTOMATION DIRECT 17. 1 CB, 3P. 0.5A, C CURVE WMZT3CX0 AUTOMATION DIRECT 18. 1 MCCB, 3P, 225A, F-FRAME F3P-225 AUTOMATION DIRECT 19. 1 MCCB, MULTI-WIRE LUG F-FRAME 3TA150F6K AUTOMATION DIRECT 20. 1 MCCB, ROTARY HNDL, F-FRAME FHMVD12B AUTOMATION DIRECT 21. 1 MINI PS-100, 240VAC/24VDC/C2LPS 2866336 PHOENIX CONTACT 22. 6 TERMINAL BASE, 2 PC. 8-PT. 1734-TBS ALLEN BRADLEY 23. 1 24VDC, 8-PT., SINK INPUT MODULE 1734-IB8 ALLEN BRADLEY 24. 1 COMMON TERMINAL MODULE 1734-CTM ALLEN BRADLEY 25. 1 4 CH, ANALOG INPUT MODULE, HART 1734-SC-IE 4CH ALLEN BRADLEY 26. 1 CONTROLNET ADAPTER 1734-ACNR ALLEN BRADLEY 27. 3 CARD RELAY, 5A, SPST, 4RLY, 24VDC RS4N-DE AUTOMATION DIRECT 28. 1 REDUNDANT CNTRLNET BAR. MOD. 1797-BCNR ALLEN BRADLEY 29. 2 MMS 63A 55mm ROTARY BM3VHB-063 AUTOMATION DIRECT 30. 2 MMS BASE PLATE BM3V up to E2 BZ0BPVE51A AUTOMATION DIRECT 31. 2 CONTACTOR 50A 54mm 110/120V COIL SC-E2S-110VAC AUTOMATION DIRECT 32. 2 LINK MODULE BM3V AC SC-E2S BV0LVE51AA AUTOMATION DIRECT 33. 2 MMS 20A 45mm ROTOR BM3RHB-020 AUTOMATION DIRECT 34. 2 MMS BASE PLATE BM3RH NP to E05 BZ0BPRE22A AUTOMATION DIRECT 35. 2 LINK MODULE BM3RH E02 to E05 BZ0LRE22AA AUTOMATION DIRECT 36. 2 CONTACTOR 12A 110/120V COIL SC-E03-110VAC AUTOMATION DIRECT 37. 4 AUX CONTACT 2NO E02 to E04 FRONT SZ-A20T AUTOMATION DIRECT 38. 4 MMS AUX CONTACT 1NO FRONT BZ0WIA AUTOMATION DIRECT 39. 1 MMS BUSBAR TERMINAL BM3RH BZ0BFRA AUTOMATION DIRECT 40. 1 MMS BUSBAR BM3RH 2-BM3RH BZ0BR02A AUTOMATION DIRECT 41. 8 SUPP PROTECTOR 6A 1 POLE 250V RESET DN-SUPP-6-1 AUTOMATION DIRECT 42. 1 SUPP PROTECTOR 10A 1 POLE 250V RESET DN-SUPP-10-1 AUTOMATION DIRECT 43. 1 SUPP PROTECTOR 3A 1 POLE 250V RESET DN-SUPP-3-1 AUTOMATION DIRECT 44. 7 SUPP PROTECTOR 1A 1 POLE 250V RESET DN-SUPP-1-1 AUTOMATION DIRECT 45. 4 TERM BULK SOCKET 5/PK 25A 300V euro F4 DN-FE4-5 AUTOMATION DIRECT 46. 1 CONTROLNET BNC TERMINATOR 1786-XT ALLEN BRADLEY 47. 2 24VDC 8-POINTSOURCE OUTPUT MODULE 1734-OB8 ALLEN BRADLEY 48. 1 E-NET PATCH CABLE Cat5E STP 3FT GRAY C5E-STPGY-S3 AUTOMATION DIRECT 49. 14 TERMINAL BLOCK 20A 12AWG 600V DN-T12 AUTOMATION DIRECT 50. 9 END BRACKET 6mm 35mm DIN RAIL DN-QEB35 AUTOMATION DIRECT 51. 5 TERMINAL BLOCK 24 - 10 AWG DIN DN-G10 AUTOMATION DIRECT 52. 1 VOLTAGE TERMINAL MODULE 1734-VTM ALLEN BRADLEY 53. A/R WIRE DUCT 1-1/2 x 3 T1-2230G AUTOMATION DIRECT ITEM NO QTY NAME PART NO MFG 4 2 53 6 16 15 1920 34 35 36 37 38 30 31 32 37 38 45 45 39 40 41 45 4445 47 5 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-00_ControlPanel.dwg 45 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
10.00 8.00 7.75 5.00 2.62 8.62 10.25 4.92 (125 mm) 6.28 6.50 2.00 6.86 REF 10.29 1.50 2.00 9.62 6.38 10.13 PANEL - DIN RAIL AND WIRE DUCT LAYOUT SCALE=1:2 CONTROL PANEL DIN RAIL / WIRE DUCT INSTALLATION E4-00.02 1:2 A COMMUNICATION&CLASS2WIRING CLASS1WIRING ACWIRING AC WIRING WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-00_ControlPanel.dwg 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
LNG Pump 93101 Enable REF DWG - P2-93.01 LNG Pump 93102 Enable REF DWG - P2-93.01 Air Comp. 95101 Enable REF DWG - P2-95.01 Air Comp. 95102 Enable REF DWG - P2-95.01 X1 From ATS / Ref Dwg E2-00.01-A Spare 120 VAC, Non UPS Power X2 Sump Pump 93101 Run REF DWG - P2-93.01 Sump Pump 93102 Run REF DWG - P2-93.01 Air Dryer SP 901 Supply Power REF DWG - P2-95.01 Note 1 Air Dryer SP 902 Supply Power REF DWG - P2-95.02 ~ L + - PS1 120Vac 24Vdc 91.2 Watts +24 Com 1768-PA3 Power Supply REF DWG E4-00.00 UPS-H From UPS / Ref Dwg - E2-00.01A RIO Panel 1 Supply Power REF DWG - E4-01.00 Spare RIO Panel 2 Supply Power REF DWG - E4-02.00 RIO Panel 2 Supply Power REF DWG - E4-03.00 UPS-N 1734-ACNR Power Supply +24V From PS1 / Ref Dwg - E4-00.02B REF DWG - P2-90.02 Industrial Ethernet Switch REF DWG - P2-90.02 REF DWG - P2-94.01 REF DWG - P2-90.02 REF DWG - P2-94.02N REF DWG E4-00.02C 1734-ACNR Power Supply REF DWG - E4-00.00 +24V From PS1 / Ref Dwg - E4-00.02B FIT 90217 REF DWG - P2-90.02 Industrial Ethernet Switch REF DWG - E4-00.00 Com FIT 90218 REF DWG - P2-90.02 FIT 94101 REF DWG - P2-94.01 FIT 90256 REF DWG - P2-90.02 Spare FIT 94201 REF DWG - P2-94.02 120 VAC - NON-UPS POWER 120 VAC - UPS POWER 24 VDC POWER CONTROL PANEL POWER DISTRIBUTION DIAGRAMS E4-00.03 NTS A B C WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-00_ControlPanel.dwg 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
0 IN 0 2 IN 2 4 COM 6 FGN 1 IN 1 3 IN 3 5 +24 7 FGN 1734sc-IE4CH Slot 1 1734-VTM Slot 1A PIT95160 + - PIT 95160 Instrument Air Pressure REF DWG - P2-95.01 Blk Wht Wht Blk Note 1 0 V 2 V 4 V 6 V 1 V 3 V 5 V 7 V 0 IN 0 2 IN 2 4 IN 4 6 IN 6 1 IN 1 3 IN 3 5 IN 5 7 IN 7 1734-IB8 Slot 2 0 V 2 V 4 V 6 V 1 V 3 V 5 V 7 V 1734-VTM Slot 1A Air Dryer Alarm REF DWG - P2-95.01 Air Dryer Alarm REF DWG - P2-95.01 Comp. 1 Selected REF DWG - P2-95.01 Comp. 2 Selected REF DWG - P2-95.01 Note 1 Phase Monitoring Relay REF DWG - E4-00.00 Load Out Pump 1 Selected REF DWG - P2-93.01 Load Out Pump 2 Selected REF DWG - P2-93.01 1734-OB8 Slot 4 0 Out 0 2 Out 2 4 Out 4 6 Out 6 1 Out 1 3 Out 3 5 Out 5 7 Out 7 Blue Strobe/General Alarm 0 C 2 C 4 C 6 C 1 C 3 C 5 C 7 C 1734-CTM Slot 3A Note 1 Methane Hi Hi Alarm FACP Alarm To/From Fire Alarm Control Panel ref dwg ref sht White Strobe & Horn/ Hi Methane Alarm 1734-OB8 Slot 3 0 Out 0 2 Out 2 4 Out 4 6 Out 6 1 Out 1 3 Out 3 5 Out 5 7 Out 7 Com / REF DWG - E4-00.00 LNG Pump 93101 Enable REF DWG - P2-93.01 LNG Pump 93102 Enable REF DWG - P2-93.01 Air Comp. 95101 Enable REF DWG - P2-95.01 Air Comp. 95102 Enable REF DWG - P2-93.01 Sump Pump 93130 Run REF DWG - P2-93.01 Sump Pump 93131 Run REF DWG - P2-93.01 Air Dryer SP 901 Run REF DWG - P2-95.01 Air Dryer SP 902 Run REF DWG - P2-95.01 ANALOG INPUT MODULE SLOT 1 ANALOG INPUT MODULE SLOT 2 DIGITAL OUTPUT MODULE SLOT 3 DIGITAL OUTPUT MODULE SLOT 4 CONTROL PANEL ANALOG INPUT MODULE SLOT 1 THRU 4 E4-00.04 NTS A B DC WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-00_ControlPanel.dwg 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
SLOT 5 AB 1797-OE8H KEY SWITCH 4 REMOTE I/O PANEL #1 PANEL LAYOUT POWER DISTRIBUTION E4-01.01 1:4 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-01_RIO-1.dwg REMOTE I/O PANEL #1 LAYOUT SCALE = 1:4 A 1. 1 PANEL 24 X 24 X 8 SCE-24EL2408SSLP SAGINAW 2. 1 SUB PANEL SCE-24P24 SAGINAW 3. 1 EL, MOUNTING FEET KIT, SS SCE-ELMFK4SS SAGINAW 4. A/R DIN RAIL 35mm x 15mm 5. A/R WIRE WAY 1-1/2 x 4 6. 1 CONTROLNET EX RIGHT Y-TAP 1797-TPYR ALLEN BRADLEY 7. 1 REDUNDANT MEDIA ADAPTER EX CNTRLNET 1797-ACNR15 ALLEN BRADLEY 8. 3 FLEX EX ANALOG INPUT MOD, 8 PT HART 1797-IE8H ALLEN BRADLEY 9. 2 FLEX EX ANALOG OUTPUT MOD, 8 PT HART 1797-OE8H ALLEN BRADLEY 10. 2 FLEX EX DIGITAL INPUT MOD, 8 PT HART 1797-IBN16 ALLEN BRADLEY 11. 1 FLEX EX 24VDC SOURCE OUPUT MOD.4 PT 1797-OB4D ALLEN BRADLEY 12. 8 3 WIRE EX TERMINAL BASE - SCREW CLAMP 1797-TB3 ALLEN BRADLEY 13. 1 EXTENDER CABLE FOR TERMINAL BASES 1797-CE1 ALLEN BRADLEY 14. 1 CONTROLNET EX TRUNK TERMINATOR 1797-XT ALLEN BRADLEY 15. 20 TERMINAL BLOCK 24-10 AWG DIN DN-G10 ALLEN BRADLEY 16. 2 END BRACKET 6 mm / 35 mm DIN RAIL 1492-EBJ3 ALLEN BRADLEY 17. 2 END BARRIER 1492-EAJ35 ALLEN BRADLEY 18. 1 PLUG IN CENTER JUMPER, 20 POLE 1492-CJLJ5-20 ALLEN BRADLEY ITEM NO QTY NAME PART NO MFG NOTE: 1. ROUTE POWER SUPPLY CONDUCTORS THROUGH FERRITE CORE. ONE FERRITE CORE PER POWER SUPPLY. 1 FERRITE CORE 12 15 4 2 8 12 13 3 7 5 6 3 PL 16 17 18 9 12 9 12 10 12 10 12 11 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
1 2 3 4 5 Vin Vout Gnd 10 11 12 13 14 15 16 17 +V -V +V -V +V -V +V -V Out 1 Out 2 Out 3 Out 4 Input Power Intrinsically Safe Outputs Power Supply 1 To Slot 3 REF DWG E4-01.02 1 2 3 4 5 Vin Vout Gnd 10 11 12 13 14 15 16 17 +V -V +V -V +V -V +V -V Out 1 Out 2 Out 3 Out 4 Input Power Intrinsically Safe Outputs Power Supply 2 Note 1 Note 1 120Vac Power REF SHT E4-00.02 ControlNet Communication Adapter 1797-ANCR15 Incoming ControlNet Trunk Cable (Belden 3092A) FROM CONTROL PANEL REF DWG E4-02.00 1797-TPYR ControlNet Y Tap To Slot 2 REF DWG E4-01.02 To Slot 1 REF DWG E4-01.02 To Slot 4 REF DWG E4-01.02 To Slot 5 REF DWG E4-01.03 To Slot 6 & 7 REF DWG E4-01.03 To Slot 8 REF DWG E4-01.03 Outgoing ControlNet Trunk Cable (Belden 3092A) TO RIO #2 REF DWG E4-02.00 POWER DISTRIBUTION SCHEMATIC SCALE = NTS B REMOTE I/O PANEL #1 PANEL LAYOUT POWER DISTRIBUTION E4-01.02 1:2 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-01_RIO-1.dwg NOTE: 1. ROUTE POWER SUPPLY CONDUCTORS THROUGH FERRITE CORE. 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - LIT-92130 1 2 FIT-90256 REF DWG E4-20.02 1 2 FIT-90217 REF DWG E4-20.02 1 2 Ch0 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-IE8H Slot 1 Keyswitch 8 PS1-2+ PS1-2- REF DWG E4-01.01B + - LIT-92140 + - LIT-92430 + - LIT-92230 + -LIT-92330 Note 1 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 FIT-90218 REF DWG E4-20.02 AB 1797-IE8H Slot 2 Keyswitch 8 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - PIT-90215 + - LIT-92440 + -LIT-92240 + - Ch0 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C PS1-3+ PS1-3- REF DWG E4-01.01B + - PIT-92233 + - PIT-92133 + -PIT-90218 + -PIT-90256 Note 1 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 LIT-92340 AB 1797-IE8H Slot 3 Keyswitch 8 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - TT-93130 + - TT-90230 + - PIT-92333 + - Ch0 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C PS1-4+ PS1-4- REF DWG E4-01.01B + - TIT-92401 + - TIT-92301 + - TIT-92101 + - TIT-92201 Note 1 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 PIT-92433 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - HCV-92109 + - PCV-90256 + - HCV-90221 + - HCV-90222 Ch0 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-OE8H Slot 4 Keyswitch 4 ~~ PS2-1+ PS2-1- REF DWG E4-01.01B + - HCV-92239 + - HCV-92209 + - HCV-92139 + - PCV-92133 Note 1 ANALOG INPUT MODULE SCALE = NTS ANALOG INPUT MODULE SCALE = NTS ANALOG INPUT MODULE SCALE = NTS ANALOG OUTPUT MODULE SCALE = NTS A C D B WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-01_RIO-1.dwg REMOTE I/O PANEL #1 ANOLOG INPUT MODULE SLOT 1 THRU 4 E4-01.03 NTS WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-01_RIO-1.dwg NOTE: 1. TERMINATE SHIELDS AT GROUNDING TERMINALS PROVIDED IN ENCLOSURE 2. TERMINATE WIRES RED to POSITIVE BLACK to NEGATIVE 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - PCV-92333 + - HCV-92339 + - PCV-92233 + - HCV-92309 Ch0 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-OE8H Slot 5 Keyswitch 4 ~~ PS2-2+ PS2-2- REF DWG E4-01.01B + - PCV-92433 + -HCV-92409 + - HCV-92439 Note 1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 XCV-92152 OPEN POS. Ch0 Ch2 Ch6 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-IBN16 Slot 6 Keyswitch 6 PS2-3+ PS2-3- REF DWG E4-01.01B Ch1 Ch3 Ch5Ch4 Ch7 Ch8 Ch10 Ch14Ch9 Ch11 Ch13Ch12 Ch15 XCV-92152 CLOSED POS. XCV-92158 OPEN POS. XCV-92158 CLOSED POS. XCV-92258 CLOSED POS. XCV-92258 OPEN POS. XCV-92252 CLOSED POS. XCV-92252 OPEN POS. XCV-92352 OPEN POS. Note 1 XCV-92352 CLOSED POS. XCV-92358 OPEN POS. XCV-92358 CLOSED POS. XCV-92458 CLOSED POS. XCV-92458 OPEN POS. XCV-92452 CLOSED POS. XCV-92452 OPEN POS. 1 2 3 4 OFF Fault Detect Switch PS2-3+ PS2-3- Note 1 REF DWG E4-01.03C 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 LS-90231 / LO LEVEL Ch0 Ch2 Ch6 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-IBN16 Slot 7 Keyswitch 6 PS2-3+ PS2-3- Note 1 Ch1 Ch3 Ch5Ch4 Ch7 Ch8 Ch10 Ch14Ch9 Ch11 Ch13Ch12 Ch15 LS-90231 / HI LEVEL LS-90231 / HI HI LEVEL XCV-90263 / OPEN POS. LS-93131 / HI HI LEVEL LS-93131 / HI LEVEL LS-93131 / LO LEVEL XCV-90263 / CLOSED POS. Note 1 XCV-94109 / CLOSED POS. XCV-94109 / OPEN POS. 1 2 3 4 OFF Fault Detect Switch REF DWG E4-01.03B XCV-94209 / CLOSED POS. XCV-94209 / OPEN POS. XCV-90241 / OPEN POS. XV-90241 / CLOSED POS. XCV-90217 / OPEN POS. XCV-90217 / CLOSED POS. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 XV-92152 Ch0 Ch1 Ch2 Ch3 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-OB4D Slot 8 Keyswitch 7 ~~ PS2-4+ PS2-4- REF DWG E4-01.01B XV-92158 XV-92258 XV-92252 ANALOG OUTPUT MODULE SCALE = NTS A DIGITAL INPUT MODULE SCALE = NTS B DIGITAL OUTPUT MODULE SCALE = NTS C DIGITAL OUTPUT MODULE SCALE = NTS D WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-01_RIO-1.dwg REMOTE I/O PANEL #1 ANALOG INPUT MODULE SLOT 5 THRU 8 E4-01.04 NTS WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-01_RIO-1.dwg NOTE: 1. TERMINATE SHIELDS AT GROUNDING TERMINALS PROVIDED IN ENCLOSURE 2. TERMINATE WIRES RED to POSITIVE BLACK to NEGATIVE 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
REMOTE I/O PANEL #2 PANEL ASSY PANEL LAYOUT E4-02.01 1:2 REMOTE I/O PANEL #2 LAYOUT SCALE = 1:4 A 1. 1 PANEL 24 X 24 X 8 SCE-24EL2408SSLP SAGINAW 2. 1 SUB PANEL SCE-24P24 SAGINAW 3. 1 EL, MOUNTING FEET KIT, SS SCE-ELMFK4SS SAGINAW 4. A/R DIN RAIL 35mm x 15mm 5. A/R WIRE WAY 1-1/2 x 4 6. 1 CONTROLNET EX RIGHT Y-TAP 1797-TPYR ALLEN BRADLEY 7. 1 REDUNDANT MEDIA ADAPTER EX CNTRLNET 1797-ACNR15 ALLEN BRADLEY 8. 4 FLEX EX ANALOG INPUT MOD, 8 PT HART 1797-IE8H ALLEN BRADLEY 9. 1 FLEX EX ANALOG OUTPUT MOD, 8 PT HART 1797-OE8H ALLEN BRADLEY 10. 0 FLEX EX DIGITAL INPUT MOD, 8 PT HART 1797-IBN16 ALLEN BRADLEY 11. 3 FLEX EX 24VDC SOURCE OUPUT MOD.4 PT 1797-OB4D ALLEN BRADLEY 12. 8 3 WIRE EX TERMINAL BASE - SCREW CLAMP 1797-TB3 ALLEN BRADLEY 13. 1 EXTENDER CABLE FOR TERMINAL BASES 1797-CE1 ALLEN BRADLEY 14. 1 CONTROLNET EX TRUNK TERMINATOR 1797-XT ALLEN BRADLEY 15. 20 TERMINAL BLOCK 24-10 AWG DIN DN-G10 ALLEN BRADLEY 16. 2 END BRACKET 6 mm / 35 mm DIN RAIL 1492-EBJ3 ALLEN BRADLEY 17. 2 END BARRIER 1492-EAJ35 ALLEN BRADLEY 18. 1 PLUG IN CENTER JUMPER, 20 POLE 1492-CJLJ5-20 ALLEN BRADLEY ITEM NO QTY NAME PART NO MFG WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-02_RIO-2.dwg NOTE: 1. ROUTE POWER SUPPLY CONDUCTORS THROUGH FERRITE CORE. 1 FERRITE CORE 12 4 2 8 12 13 2 PL 3 7 5 6 15 16 17 18 14 9 12 9 12 11 12 11 12 11 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
1 2 3 4 5 Vin Vout Gnd 10 11 12 13 14 15 16 17 +V -V +V -V +V -V +V -V Out 1 Out 2 Out 3 Out 4 Input Power Intrinsically Safe Outputs Power Supply 3 To Slot 3 REF DWG - E4-02.02 1 2 3 4 5 Vin Vout Gnd 10 11 12 13 14 15 16 17 +V -V +V -V +V -V +V -V Out 1 Out 2 Out 3 Out 4 Input Power Intrinsically Safe Outputs Power Supply 4 Note 1 Note 1 120Vac Power REF DWG - E4-00.02B ControlNet Communication Adapter 1797-ANCR15 Incoming ControlNet Trunk Cable From RIO #1 REF DWG - E4-00.01 1797-TPYR ControlNet Y Tap To Slot 2 REF DWG - E4-02.02 To Slot 1 REF DWG - E4-02.02 To Slot 5 REF DWG - E4-02.03 To Slot 4 REF DWG - E4-02.02 To Slot 7 REF DWG - E4-02.03 To Slot 6 REF DWG - E4-02.03 1797-XT 75 ohm ControlNet Trunk terminator. 1 2 3 4 5 Vin Vout Gnd 10 11 12 13 14 15 16 17 +V -V +V -V +V -V +V -V Out 1 Out 2 Out 3 Out 4 Input Power Intrinsically Safe Outputs Power Supply 5 To Slot 8 REF DWG - E4-02.03 Note 1 120Vac Power REF DWG - E4-00.02B POWER DISTRIBUTION SCHEMATIC SCALE = NTS REMOTE I/O PANEL #2 COMPONENT LAYOUT POWER DISTRIBUTION SCHEMATIC E4-02.02 1:4 A WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-02_RIO-2.dwg NOTE: 1. ROUTE POWER SUPPLY CONDUCTORS THROUGH FERRITE CORE. 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - AS-94263 + -AS-94163 Ch0 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-IE8H Slot 1 Keyswitch 8 PS3-2+ PS3-2- + - PDIT-93127B REF DWG - E4-20.01A + - PDIT-93127A REF DWG - E4-20.01A 1 2 FIT-94101 REF DWG - E4-20.02 1 2 FIT-94201 REF DWG - E4-20.02 Note 1 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 REF DWG E4-02.01 AB 1797-IE8H Slot 2 Keyswitch 8 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - PIT-94158 + -PIT-92924 + - Ch0 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C PS3-3+ PS3-3- + - TIT-93121A + - TIT-93105 + - PIT-94258 Note 1 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 PIT-93151 REF DWG E4-02.01 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - HCV-94139 + - PCV-92924 Ch0 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-OE8H Slot 4 Keyswitch 4 ~~ PS4-1+ PS4-1- + - HCV-92211 + - HCV-94239 + - PCV-94158 + - HCV-92113 Note 1 REF DWG E4-02.01 + - PCV-93151 + - HCV-92111 AB 1797-IE8H Slot 3 Keyswitch 8 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - TIT-93135B + - TIT-93135A + -TIT-93121B + - Ch0 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C PS3-4+ PS3-4- + - TIT-94264 + - TIT-94164 Note 1 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 TIT-90263 REF DWG E4-02.01 REMOTE I/O PANEL #2 SLOT 1 THRU 4 WIRING SCHEMATIC E4-02.03 NTS ANALOG INPUT MODULE SCALE = NTS ANALOG OUTPUT MODULE SCALE = NTS ANALOG INPUT MODULE SCALE = NTSA D B ANALOG INPUT MODULE SCALE = NTS C WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-02_RIO-2.dwg NOTE: 1. TERMINATE SHIELDS AT GROUNDING TERMINALS PROVIDED IN ENCLOSURE 2. TERMINATE WIRES RED to POSITIVE BLACK to NEGATIVE 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - PCV-94258 + - HCV-92213 Ch0 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-OE8H Slot 5 Keyswitch 4 ~~ PS4-2+ PS4-2- REF DWG E4-02.01 + - + - HCV-92311 HCV-92313 + - HCV-92411 + - HCV-92413 Note 1 + HCV-93101 - 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 XV-92352 Ch0 Ch1 Ch2 Ch3 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-OB4D Slot 7 Keyswitch 7 ~~ PS4-4+ PS4-4- REF DWG E4-02.01 XV-92358 XV-92458 XV-92452 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 XV-90263 Ch0 Ch1 Ch2 Ch3 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-OB4D Slot 6 Keyswitch 7 ~~ PS4-3+ PS4-3- XV-94109 REF DWG E4-02.01 XV-94209 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 XV-90217 Ch0 Ch1 Ch2 Ch3 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-OB4D Slot 8 Keyswitch 7 ~~ PS5-1+ PS5-1- REF DWG E4-02.01 XV-90241 REMOTE I/O PANEL #2 SLOT 5 WIRING SCHEMATIC E4-02.04 NTS ANALOG OUTPUT MODULE SCALE = NTS A NOTE: 1. TERMINATE SHIELDS AT GROUNDING TERMINALS PROVIDED IN ENCLOSURE 2. TERMINATE WIRES RED to POSITIVE BLACK to NEGATIVE WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-02_RIO-2.dwg DIGITAL OUTPUT MODULE SCALE = NTS C DIGITAL OUTPUT MODULE SCALE = NTS B DIGITAL OUTPUT MODULE SCALE = NTS D 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
1 2 3 4 5 6 7 8 9 10 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-05_SumpPanel-6x6.dwg SUMP FLOAT TREE PANEL ASSY GA-90XXX E4-05.01 1:1 TERMINAL No. 1 2 3 4 5 6 7 8 9 10 ITEM NO QTY NOMENCLATURE PART NO MFG 1 1 PANEL 6 X 6 X 4 SS SCE-606ELJSS SAGINAW 2 1 SUB-PANEL 6 X 6 SCE-6P6J SAGINAW 3 1 MOUNTING FEET SCE-ELJMFKSS SAGINAW 4 A/R DIN RAIL 35 MM STD 5 2 END ANCHOR 1492-EAJ35 ALLEN BRADLEY 6 1 END BARRIER 1492-EBJ3 ALLEN BRADLEY 7 10 TERMINAL BLOCK 1492-J3 ALLEN BRADLEY PARTS LIST 5 7 5 6 2 1 3 4 TERMINAL PANEL ASSY / SKID #90202 SCALE = 1:1 A INCOMING DEVICE FLOAT 90XXX HIGH / HIGH FLOAT 90XXX HIGH FLOAT 90XXX LOW RED BLACK RED BLACK RED BLACK CABLE TERMINATIONS NOTE: 1. All conduits to be side or bottom entry. 2. Cable type is specified. Approval must be given for a substitution. 3. Rigid conduit to be installed per NEC Article 342 or 344. All access covers shall be accessible. 4. Liquidtight Flexible metal conduit shall be used to connect to all instruments in such way as to avoid stress at the Liquidtight fitting and in accordance with NEC article 350. 5. All mechanical work will be done in a neat and workman-like manner. 6. Connections to all instruments shall be installed to not obstruct and allow removal for serviceability. 7. All wiring will be Intrinsically Safe and installed per NEC Article 504. 8. Intrinsically Safe conduits shall be labeled as per NEC Article 504. 9. Myers hubs shall be used when connecting to the junction box. 10. Maximum number of Belden 9322 conductors in RMC or IMC are: 0.5" = 4; 0.75" = 7, 1.0" = 11 and 1.25" = 19 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
1 2 3 4 5 6 7 8 9 10 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-05_SumpPanel-6x6.dwg SUMP FLOAT TREE PANEL ASSY GA-90XXX E4-05.02 1:1 ITEM NO QTY NOMENCLATURE PART NO MFG 1 1 PANEL 6 X 6 X 4 SS SCE-606ELJSS SAGINAW 2 1 SUB-PANEL 6 X 6 SCE-6P6J SAGINAW 3 1 MOUNTING FEET SCE-ELJMFKSS SAGINAW 4 A/R DIN RAIL 35 MM STD 5 2 END ANCHOR 1492-EAJ35 ALLEN BRADLEY 6 1 END BARRIER 1492-EBJ3 ALLEN BRADLEY 7 10 TERMINAL BLOCK 1492-J3 ALLEN BRADLEY PARTS LIST 5 7 5 6 2 1 3 4 TERMINAL PANEL ASSY / SKID #90202 SCALE = 1:1 A CABLE TERMINATIONS NOTE: 1. All conduits to be side or bottom entry. 2. Cable type is specified. Approval must be given for a substitution. 3. Rigid conduit to be installed per NEC Article 342 or 344. All access covers shall be accessible. 4. Liquidtight Flexible metal conduit shall be used to connect to all instruments in such way as to avoid stress at the Liquidtight fitting and in accordance with NEC article 350. 5. All mechanical work will be done in a neat and workman-like manner. 6. Connections to all instruments shall be installed to not obstruct and allow removal for serviceability. 7. All wiring will be Intrinsically Safe and installed per NEC Article 504. 8. Intrinsically Safe conduits shall be labeled as per NEC Article 504. 9. Myers hubs shall be used when connecting to the junction box. 10. Maximum number of Belden 9322 conductors in RMC or IMC are: 0.5" = 4; 0.75" = 7, 1.0" = 11 and 1.25" = 19 TERMINAL No. 1 2 3 4 5 6 7 8 9 10 INCOMING DEVICE FLOAT 90XXX HIGH / HIGH FLOAT 90XXX HIGH FLOAT 90XXX LOW RED BLACK RED BLACK RED BLACK 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
WIRE PULL SCHEDULE POWER / LIGHT / CLASS 1 - A/C E4-10.01 NTS WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-10_WirePull.dwg 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
WIRE PULL SCHEDULE CLASS 1 - D/C & COMMUNICATIONS E4-10.02 NTS WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-10_WirePull.dwg 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
WIRE PULL SCHEDULE RIO TO J BOX E4-10.03 NTS WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-10_WirePull.dwg 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
A B B RTD AND RESISTANCE (3-WIRE) 2 1 3 4 5 C 1 2 3 4 5 - + H L C POWER SUPPLY AND OUTPUT TERMINAL+- - EXTERNAL INDICATOR (AMMETER) TERMINAL *1 GROUND TERMINAL *1: When using an external indicator or check meter, the internal resistance must be 10 Ohm or less. The hook is not available for Fieldbus communication type (out put signal code F) WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-20_Instruments.dwg TEMPERATURE TRANSMITTER YOKOGAWA - YTA 110 TIT - WIRING DIAGRAM E4-20.01 NTS YOKOGAWA YTA110 SINGLE INPUT TERMINAL WIRE CONNECTION DIAGRAM YOKOGAWA YTA110 TERMINAL DIAGRAM - INSIDE BACK COVERD YOKOGAWA YTA110 INSIDE FRONT COVERA E TERMINAL CONFIGURATION F CHECK METER CONNECTION HOOK *1 YOKOGAWA YTA110 FRONT VIEWB YOKOGAWA YTA110 SIDE VIEWC GROUND TERMINAL 1/2" NPT CONDUIT CONNECTION 4-20 mA CONNECTION RED + BLACK - NOTE: HARDWARE ERROR BURNOUT DIRECTION PINS JUMPER SET TO HIGH THERMOWELL SHOWN FOR REFERENCE NOTE: PLUG ALL UNUSED CONDUIT OPENINGS 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
+ - 4....20 mA Test Test +- + - 4....20 mA Test Test WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-20_Instruments.dwg PROCESS/DIFFERENTIAL PRESSURE TRANSMITTER ENDRESS + HAUSER - PMD75 / PMP71 LIT / PIT / PDIT- WIRING DIAGRAM E4-20.02 1:2 A INTERNAL GROUND TERMINAL EXTERNAL GROUND TERMINAL INSIDE FRONT COVER WIRING CONNECTION DIAGRAM B DIFFERENTIAL PRESSURE TRANSMITTER ENDRESS + HAUSER - Deltabar S PMD75C TEST JUMPER DIFFERENTIAL PRESSURE TRANSMITTER ENDRESS + HAUSER - Deltabar S PMD75 DIFFERENTIAL PRESSURE TRANSMITTER ENDRESS + HAUSER - Deltabar S PMD75 FRONT VIEW SIDE VIEW 4-20 mA CONNECTION RED + BLACK - D INTERNAL GROUND TERMINAL EXTERNAL GROUND TERMINAL INSIDE FRONT COVER WIRING CONNECTION DIAGRAM TEST JUMPER PRESSURE TRANSMITTER ENDRESS + HAUSER - Cerabar S PMP71 4-20 mA CONNECTION RED + BLACK - E PRESSURE TRANSMITTER ENDRESS + HAUSER - Cerabar S PMP71 FRONT VIEW 1/2" NPT CONDUIT CONNECTION NOTE: PLUG ALL UNUSED CONDUIT OPENINGS 1/2" NPT CONDUIT CONNECTION 1/2" NPT CONDUIT CONNECTION 1/2" NPT CONDUIT CONNECTION 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
1 2 3 4 5 6 7 8 9 10 - + A VIOLET B YELLOW C ORANGE D BROWN E WHITE F GREEN G RED H GRAY I BLUE C K G D J B A H I E F A B C I D E F H G A BROWN B VIOLET C YELLOW D ORANGE E GRAY F BLUE G WHITE H GREEN I RED J MOUNTING SCREW K GROUND SCREW (BLACK) A VIOLET B YELLOW C ORANGE D BROWN E WHITE F GREEN G RED H GRAY I BLUE WIRE COLOR SENSOR TERMINAL REMOTE CORE PROCESSOR TERMINAL FUNCTION BLACK NO CONNECTION GROUND SCREW (SEE NOTE) DRAIN WIRES BROWN 1 1 DRIVE + RED 2 2 DRIVE - ORANGE 3 3 TEMPERATURE - YELLOW 4 4 TEMPERATURE RETURN GREEN 5 5 LEFT PICKOFF + BLUE 6 6 RIGHT PICKOFF + VIOLET 7 7 TEMPERATURE + GRAY 8 8 RIGHT PICKOFF - WHITE 9 9 LEFT PICKOFF - NOTE: Ground the shield drain wires (the black wire) only on the core processor end, by connecting it to the ground screw inside the lower conduit ring. Never ground to the core processor's mounting screw. Never ground the cable at the sensor junction box. WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-20_Instruments.dwg FLOW TRANSMITTER/FLOW ELEMENT MICRO MOTION FIT/FE - WIRING DIAGRAM E4-20.03 NTS INSIDE COVER SIDE VIEW TRANSMITTER TERMINALS Micro Motion 2700 INTERNAL WIRE CONNECTION DIAGRAM E 1/2" NPT POWER INPUT 3/4" NPT 9 Wire Cable to SENSOR SENSOR TERMINALS CMF 100, 200, 300 INTERNAL WIRE CONNECTION DIAGRAM C SENSOR TERMINALS CMF 100, 200, 300 WIRE COLOR CODE DIAGRAM G TRANSMITTER TERMINALS Micro Motion 2700 WIRE COLOR CODE DIAGRAM F 24 VDC TRANSMITTER TERMINALS Micro Motion 2700 INTERNAL WIRE CONNECTION DIAGRAM A FRONT VIEW Micro Motion 2700B EXTERNAL GROUND 1/2" NPT 4-20 mA CONNECTION 4-20 mA HART RED + BLACK - RED + BLACK - GROUND SENSOR TERMINAL - J-BOX CMF 100, 200, 300D 3/4" NPT 9 Wire Cable to SENSOR VIEW A-A INSIDE COVER -A- -A- INSIDE BOTTOM COVER FLOW ELEMENT TO FLOW SENSOR CONNECTION Micro Motion 2700 TO CMF 100, 200, 300 WIRE COLOR CODE DIAGRAM H NOTE: PLUG ALL UNUSED CONDUIT OPENINGS 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
1211 -+ 4-20 IN G Y R BLACK GREEN RED 3 2 1 6 5 4 3 2 1 6 5 4 TOP REED SWITCH (CLOSED) BOTTOM REED SWITCH (OPEN) OPTIONAL SOLENOID WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-20_Instruments.dwg MODULATING & CONTROL VALVES WORCHESTER ZIT / XV / ZSC / ZSO - WIRING DIAGRAM E4-20.04 NTS ZIT-CONNECTION POINTS FLOW/SERVE - Logix 520 si Digital Positioner WIRE CONNECTION DIAGRAM - INSIDE COVER A INTERNAL GROUND TERMINAL PCV / HCV - MODULATING VALVE ASSY FLOW/SERVE - Logix 520 si Digital PositionerB SIDE VIEW ZSO / ZSC CONNECTION POINTS FLOW/SERVE - Auto Max PositionerC INSIDE COVER XCV-CONTROL VALVE / SOLENOID ASSY FLOW/SERVE - Auto Max PositionerD SIDE VIEW XV - SOLENOID 1/2" NPT PCV / HCV ZIT ZIT GROUND TERMINAL XCV ZSO / ZSC 4-20 mA CONNECTION - ZSORED + BLACK - 4-20 mA CONNECTION - ZSC RED + BLACK - INSIDE COVER DETAIL RED + BLACK - 24 VDC CONNECTION RED + BLACK - 4-20 mA CONNECTION MAKE CONNECTION IN CONDULET NOTE: PLUG ALL UNUSED CONDUIT OPENINGS 1/2" NPT CONDUIT CONNECTION 1/2" NPT CONDUIT CONNECTION 1/2" NPT CONDUIT CONNECTION 1/2" NPT CONDUIT CONNECTION 1/2" NPT CONDUIT CONNECTION 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
- + 4-20 mA - TB1 F1 GND NEUT HOT CONTROL CONTACTS FUSE 1 2 3TB2 1 2 3 4 5 6 7 8 9 10 11 12 TB1 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-20_Instruments.dwg LEVEL SWITCH - COSENSE LL-108 AS - WIRING DIAGRAM TOP TECH / SCULLY GROUNDHOG E4-20.05 NTS COSENSE LL-108 TERMINAL WIRE CONNECTION DIAGRAMA B 4-20 mA CONNECTIONRED + BLACK - COSENSE LL-108 SIDE VIEW 3/4" NPT CONDUIT CONNECTION 3/4" NTP NOTE: PLUG ALL UNUSED CONDUIT OPENINGS GROUNDHOG PLUG SCULCON BOX MODEL SC47CC ST-47-120/240E(LK) GROUNDHOG CONDUIT INTRINSICALLY SAFE CONTACTS THAT CLOSE ON PERMIT 250 VAC RESISTIVE CONDUIT NON-INTRINSICALLY SAFE WIRING C SCULLY GROUNDHOG MODEL ST-47-120/240E (L/K) }120/240 VAC INPUT }HOT NEUTRAL GROUND BLK WHT TB6 J3 10/100 E-NET TB2 COM 0 RS485 TB3 COM 1 RS232 TB4 COM 1 RS485 TB1 POWER 85 - 250 VAC L N GND ETHERNET CAT5 A/C INPUT }LINE NEUTRAL GROUND D TOP TECH MUTLILOAD II / RCU II A/C POWER SUPPLY / COMM BOARD TB5 COM 2 RS232 RxA0 RxB0 TxA0 TxB0 WHT/BLU BLU/WHT WHT/ORG ORG/WHT RS-485 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
60 1 54 12 13 20 21 32 33 44 45 47 6263656668 48 53 54 56 57 59 13 12 11 10 9 8 7 6 5 4 3 2 1 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-20_Instruments.dwg DET-TRONICS / EAGLE QUANTUM PREMIER GAS SENSOR / FLAME DETECTOR WIRING DIAGRAM E4-20.06 NTS A DET-TRONICS EQP CONTROLLER TERMINAL IDENTIFICATION P10: TERMINALS 60 TO 62 - PORT 2 RS-485 MODBUS RTU MASTER / SLAVE NOTE: PLUG ALL UNUSED CONDUIT OPENINGS SERIAL COMMUNICATION BOARD (OPTIONAL) P9: TERMINALS 57 TO 59 RS-232 S3 CONFIGURATION PORT P8: TERMINALS 54 TO 56 - PORT 1 RS-485 MODBUS RTU MASTER / SLAVE P7: TERMINALS 48 TO 53 LON CONNECTIONS P6: TERMINALS 45 TO 47 FAULT RELAY (NC CONTACTS) P11: TERMINALS 63 TO 65 - PORT 3 RS-232 MODBUS RTU MASTER / SLAVE OR S3 CONFIGURATION P13: HIGH SPEED SERIAL LINK (HSSL) RS-232 (REDUNDANCY ONLY) P12: TERMINALS 66 TO 68 - PORT 4 RS-232 MODBUS RTU MASTER / SLAVE P5: TERMINALS 33 TO 44 RELAYS 5 TO 8 P4: TERMINALS 21 TO 32 RELAYS 1 TO 4 P1: TERMINALS 1 TO 4 . 24 VDC INPUT POWER P2: TERMINALS 5 TO 12 . DIGITAL INPUTS 1 TO 4 P3: TERMINALS 13 TO 20 . DIGITAL INPUTS 5 TO 8 CONTROLNET BNC CONNECTOR A CONTROLNET BNC CONNECTOR B NOTE: 1. INPUT VOLTAGE AT THE CONTROLLER MUST BE 18 VDC MIN. 2. REFER TO WIRE PULL SCHEDULE, DWG E4-10 FOR VOLTAGE DROP. 3. SHIELDS ON POWER CABLES MUST BE CONNECTED TO CHASSIS GROUND. 3/4 NTP METHANE SENSOR - MODEL PIRECL TERMINAL BLOCK DIAGRAMB FLAME DETECTOR -MODEL X3301 TERMINAL BLOCK DIGRAM (EQP MODEL)C 16 COM 2 SHIELD 15 COM 2A 14 COM 2B 13 POWER SHIELD 12 24 VDC + 11 24 VDC - 6 COM 1 SHIELD 5 COM 1A 4 COM 1B 3 POWER SHIELD 2 24 VDC + 1 24 VDC - 3/4 NTP3/4 NTP 3/4 NTP EARTH GROUND LUG 24 VDC - 24VDC + 24 VDC SHIELD 24 VDC - 24 VDC + 24 VDC SHIELD COM 1 A COM 1 B COM 1 SHIELD COM 2 A COM 2 B COM 2 SHIELD CALIBRATE 1 2 3 4 5 6 7 8 9 10 11 12 13 (COVER REMOVED) (COVER REMOVED) 48 24 VDC - 24VDC + 24 VDC SHIELD 24 VDC - 24 VDC + 24 VDC SHIELD COM 1 A COM 1 B COM 1 SHIELD COM 2 A COM 2 B COM 2 SHIELD CALIBRATE 1 2 3 4 5 6 7 8 9 10 11 12 13 IR HYDROCARBON GAS DETECTOR (TYP) MODEL PIRECL (GAS SENSOR) 1 6 11 16 DET-TRONICS EAGLE QUANTUM PREMIER (EQP) P7: LON CONNECTIONS IR FLAME DETECTOR (TYP) MODEL X3301 (FIRE EYE) SHIELD 1B 1A SHIELD 2B 2A COM 1 COM 2 TYPICAL DEVICE CONNECTIONS COM AND 24 VDC POWERD RETURN FROM COM 2 LAST SENSOR 24 VDC POWER 24 VDC + 24 VDC - 24 VDC SHIELD GND ADDITIONAL DEVICES BELDEN 3073F BELDEN 9367 OR 9314 NOTE: 1. REFER TO WIRE PULL SCHEDULE, DWG E4-10 FOR VOLTAGE DROP BLU WHT BLU WHT BLU WHT BLU WHT BLK RED WHT BLK RED WHT BLK RED WHT BLK RED WHT WHT BLK RED WHT BLU WHT BLU 53 NOTE: 1. DO NOT GROUND ANY SHIELDS TO DETECTOR HOUSING. 2. FOR ATEX INSTALLATIONS, THE X3301 FLAME DETECTOR HOUSING MUST BE ELECTRICALLY CONNECTED TO EARTH GROUND. NOTE: 1. DO NOT GROUND ANY SHIELDS TO DETECTOR HOUSING. 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
REMOTE - I/O PANEL CABLE DISRTIBUTION SCALE = NTS WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-30_Equip-Conduit_Cable.dwg REMOTE I/O PANEL CABLE DISTRIBUTION E4-30.01 NTS RIO #1 SKID GA-90201 J-BOX RIO #2 FROM RIO #1 BELDEN 3008AE GA-94101 J-BOX GA-94201 J-BOX GA-90230 SUMP PUMP IS J-BOX FROM RIO #1 BELDEN 3008AE FROM RIO #2 BELDEN 3004AEFROM RIO #2 BLEDEN 3008AE CLASS 1 WIRING FROM CONTROL PANEL CP-01 CONTROL PANEL PROCESS AUTOMATION CONTROL CLEAN GROUND BAR IN CONTROL BUILDING CLASS 1 - D/C RETURN GROUND INTRINSICALLY SAFE RG6/U CLASS 1 - A/C RIO POWER UNDER GROUND CONDUIT I.S. CABLE IN TRAY FROM CP-01 Class 1 - D/C YS 94201 FIT 94201 CONDUIT FROM CABLE TRAY TO INSTRUMENT OR J-BOX FROM CP-01 FIT 90217 FIT 90218 FIT 90256 FROM RIO #1 BELDEN 3010AE SKID GA-92102 J-BOX SKID GA-92202 J-BOX SKID GA-92302 J-BOX SKID GA-92402 J-BOX FROM RIO #1 BELDEN 3010AE FROM RIO #1 BELDEN 3008AE FROM RIO #2 BELDEN 3004AE FROM RIO #2 BELDEN 3006AE SKID GA-92902 FROM RIO #2 PIT 29224, BELDEN 9322 PCV 92924, BELDEN 9322 GA-93130 SUMP PUMP IS J-BOX SKID GA-93101 J-BOX FROM RIO #2 BELDEN 3006AE FROM RIO #1 BELDEN 3004AE FROM RIO #2 BELDEN 3008AE FROM RIO #1 BELDEN 3004AE FROM RIO #2 BELDEN 3008AE FROM RIO #1 BELDEN 3006AE UNDER GROUND CONDUIT FROM RIO #1 BELDEN 3006AE CONDUIT IN TRENCH FROM CP-01 Class 1 - A/C YS 94201 TT LOAD OUT 2 FROM IT - COMM TT LOADOUT 2 ETHERNET / RS485 FROM CP-01 Class 1 - D/C YS 94101 FIT 94101 FROM CP-01 Class 1 - A/C YS 94101 TT LOADOUT 1 FROM IT - COMM TT LOADOUT 1 ETHERNET / RS485 NOTE: 1. SEE WIRE PULL SCHEDULE DWG E4-10 IT CABINET 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
SITE LIGHTING CABLE DISTRIBUTION SCHEMATIC WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-30_Equip-Conduit_Cable.dwg SITE LIGHTING CABLE DISTRIBUTION E4-30.02 NTS S1 9B S1 11A S1 S1 S1-2 S1-2 S1-2 20B S1 S1-2 18C S1 S1 S1 S1 5B S1-2 S1-2 16C S1 6A S1 7B S1 8A 10A S1 12A 13B 15D 17C S1 19C 4A 3B 2A 14D 1D ATS01,120V PP01, 277V CTP01 PC NOTE: 1. SEE WIRE PULL SCHEDULE DWG E4-10 PP01, 277V PP01, 277V 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
SITE LIGHTING PLAN - 30 ft POLES SCALE 1/32" - 1'-0" DOUBLE LAMP / S1-2 SINGLE LAMP / S1 LEGEND AREA CLASSIFICATIONS CLASS 1 DIVISION 2 AREA CLASS 1 DIVISION 1 AREA NOTE: 1. ALL LAMP STANDARDS BASES TO BE ELEVATED ABOVE HAZARDOUS CLASSIFIED AREAS 2. SEE E5-01.01 FOR LAMP SCHEDULE SITE LIGHTING POLE LAYOUT E5-00.01 1/32" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-00_Lighting_Plan.dwg S1.14D S1.13A S1.11B S1.10A S1.9B S1.8A S1.7B S1.6A S1.5B S1.3A S1.1A S1.2B S1.4A S1.12C S1-2.6B S1-2.1D S1-2.5C S1-2.2D S1-2.3C S1-2.4C N SAMPLE NUMBER S1-2.10B CIRCUIT DESIGNATION LAMP IDENTIFICATION No. LAMP TYPE LAMP CODING 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
UGPUGP UGP UGP U G P UGP UGP UGPUGP UGP U G P U G P U G P UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP POWER DISTRIBUTION CONDUITS SCALE 1/4" - 1'-0" UNDERGROUND POWER CIRCUITS ENLARGED PLAN E5-01.01 1/32" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-01_Conduit_Plan.dwg 2 AIR TANK 11 kVA 45.8 FLA 240V GENERATOR 45 kVA PRI - 480V SEC - 208Y/120V 300 kVA PRI - 12,470V SEC - 480Y/277V TO WILLIAMS GATE MOTOR OPERATOR NOTE: CONDUIT CAN NOT PASS THRU HAZARDOUS AREA REF DWG E5-10 ENTRY GATE CONDUIT SCALE 1/16" - 1'-0" 1 LUMINARIES DOUBLE LAMP LUMINARIES SINGLE LAMP LEGEND UGC COMMUNICATIONS CONDUIT UGP POWER CONDUIT SLIDE GATE / EXIT MOTOR OPERATOR CT / METER PANEL ATTENDANT BUILDING CONTROL BUILDING DISPERSION FENCE 480V PANEL / PP-01 MTS-01 10 ' BUILDING SET BACK (PROPANE) (2) 10 GAL PROPANE TANKS SLIDE GATE MOTOR OPERATOR TO ENTRY/EXIT GATE MOTOR OPERATOR SLIDE GATE / ENTRY MOTOR OPERATOR NOTE: 1. DEVICE LOCATIONS ARE FOR REFERENCE ONLY FIELD DETERMINE FINAL LOCATION. 2. SEE WIRE PULL SCHEDULE - REF DWG E4-10 HEAT PUMP HEAT PUMP PB01 TO PB02 ATS01 TO ATS02 CLASS 1 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
SITE LIGHTING PLAN - UNDERGROUND CONDUIT COORDINATION SCALE 1/32" - 1'-0" DOUBLE LAMP (S1-2) SINGLE LAMP (S1) LEGEND SITE LIGHTING UNDERGROUND CONDUIT LAYOUT E5-01.02 1/32" = 1'-0" BACK-UP GENERATOR CIRCUIT (D) / ATS-01-1 CIRCUIT (C) / PP-01 CIRCUIT (B) / PP-01 CIRCUIT (A) / PP-01 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-01_Conduit_Plan.dwg S1.1D S1.2A S1.3B S1.4A S1.5B S1.6A S1.7B S1.8A S1.9B S1.10A S1.11A S1.13B S1.12A S1.19C S1-2.20B S1-2.14D S1-2.18C S1-2.15D S1-2.16C S1-2.17C N CONDUIT SEAL (ALL CONDUIT THAT PASSES THRU HAZARDOUS AREAS, EACH END, PER N.E.C.) SAMPLE NUMBER S1-2.10B CIRCUIT DESIGNATION LAMP IDENTIFICATION No. LAMP TYPE LAMP CODING CTP-01 NOTE: 1. DEVICE LOCATIONS ARE FOR REFERENCE ONLY FIELD DETERMINE FINAL LOCATION. 2. SEE WIRE PULL SCHEDULE - REF DWG E4-10 3. REF DWG E4-30.02 FOR SCHEMATIC LAYOUT CTP-01 CTP-01 CTP-01 CTP-01 CTP-01 CTP-01 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
U G C EQUIPMENT CONDUIT RUNS SCALE 1/8" - 1'-0" UNDERGROUND CONDUIT LAYOUT E5-01.03 1/32" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-01_Conduit_Plan.dwg 1 INTRINSICALLY SAFE (CONTROLNET) CLASS 1 - D/C (RETURN GROUND) CLASS 1 - A/C (RIO) A/C POWER (P93101, P93102) A/C POWER (P93130, P90230) CLASS 1 - A/C (YS / TOP TECH) CLASS 1 -A/C (P90230) CLASS 1 - D/C (YS / FIT) CLASS 1 - D/C (GA-90201 / FIT) (FIT) (SCULLY, YS) (TOP TECH) N SUMP PUMP (P93130) [CONDUITS TRANSITION TO SKID J-BOX] CONDUITS TRANSITION TO RUN ON CABLE SUPPORTS IN TRENCH (SEALS REQUIRED AT EACH END) COMM (TOP TECH) COMMUNICATIONS COMMUNICATIONS ENTRANCE NOTE: 1. DEVICE LOCATIONS ARE FOR REFERENCE ONLY FIELD DETERMINE FINAL LOCATION. 2. SEE WIRE PULL SCHEDULE - REF DWG E4-10 CLASS 1 - D/C (P90230) 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
GS GS GS GS GS GS CA CA CR CR CR CR CR FE FE FE ES ES ES CRES CR CR GS ES #3 GS ES FE CR CR SITE SAFETY/ SECURITY DEVICE PLAN SCALE 1/32" - 1'-0" SITE SECURITY & SAFETY DEVICE PLAN E5-02.01 1/32" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-02_Safety_Plan.dwg DOUBLE LAMP SINGLE LAMP LEGEND FIRE EYE EMERGENCY STOP GAS SENSOR CAMERA CARD READER FE ES GS CA CR 1 DISPERSION FENCE SECURITY FENCE PROPERTY LINE N PEDESTRIAN GATE PANIC BAR EXIT/ CARD ENTRANCE MAIN GATE CARD EXIT PEDESTRIAN GATE CARD ENTRANCE / EXIT VEHICLE GATE CARD ENTRANCE / EXIT MAIN GATE CARD ENTRANCE DISPERSION FENCE NOTE: 1. DEVICE LOCATIONS ARE FOR REFERENCE ONLY FIELD DETERMINE FINAL LOCATION . 2. SEE WIRE PULL SCHEDULE - REF DWG E4-10 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
GS GS GS GS GS GS CA CA CR CR CR CR CR FE FE FE ES ES ES CRES CR CR GS ES #1 #2 AT-90052 HS-90002 AT- 90053 AT-90002 HS-90004 AT-90054 AT-90055 AT-90003 AT-90056 AT-90058 AT-90004 AT-90057 HS-90005 #7 #10 #3 #3 #4 HS-90006 #5 #6 HS-90003 AT-90001 GS ES AT-90051 HS-90001 FE CR CR #8 #9 DOUBLE LAMP SINGLE LAMP LEGEND E-STOP CONDUIT PLAN E5-02.02 NTS FIRE EYE EMERGENCY STOP GAS SENSOR CAMERA WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-02_Safety_Plan.dwg SAFETY DEVICE / E-STOP CONDUIT ROUTING SCALE = NTS 1 CARD READER FE ES GS CA CR E-STOP 1/2" CONDUIT DISPERSION FENCE N SECURITY FENCE PROPERTY LINE TO FIRE SAFETY PANEL NOTE: 1. DEVICE LOCATIONS ARE FOR REFERENCE ONLY FIELD DETERMINE FINAL LOCATION. 2. SEE WIRE PULL SCHEDULE - REF DWG E4-10 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
GS GS GS GS GS GS CA CR CR FE FE FE ES ES ES GS ES #1 #2 AT-90052 HS-90002 AT- 90053 AT-90002 HS-90004 AT-90054 AT-90055 AT-90003 AT-90056 AT-90058 AT-90004 AT-90057 HS-90006 HS-90003 AT-90001 GS ES AT-90051 HS-90001 FE DOUBLE LAMP SINGLE LAMP LEGEND SITE SAFETY DEVICE CONDUIT PLAN E5-02.04 1/16"=1'-0" FIRE EYE EMERGENCY STOP GAS SENSOR CAMERA WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-02_Safety_Plan.dwg FIRE EYE - GAS SENSOR / CONDUIT ROUTING SCALE : 1/6"=1'-0" 1 CARD READER FE ES GS CA CR FIRE EYE / GAS SENSOR 1" CONDUIT DISPERSION FENCE NTO FIRE SAFETY PANEL NOTE: 1. DEVICE LOCATIONS ARE FOR REFERENCE ONLY FIELD DETERMINE FINAL LOCATION. 2. SEE WIRE PULL SCHEDULE - REF DWG E4-10 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
GS GS GS GS GS GS CA CA CR CR CR CR CR FE FE FE ES ES ES CRES CR CR GS ES #1 #2 AT-90052 HS-90002 AT- 90053 AT-90002 HS-90004 AT-90054 AT-90055 AT-90003 AT-90056 AT-90058 AT-90004 AT-90057 HS-90005 #7 #10 #3 #3 #4 HS-90006 #5 #6 #2 HS-90003 AT-90001 GS ES AT-90051 HS-90001 FE CR CR #8 #9 DOUBLE LAMP SINGLE LAMP LEGEND CARD READER CONDUIT PLAN E5-02.03 NTS FIRE EYE EMERGENCY STOP GAS SENSOR CAMERA WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-02_Safety_Plan.dwg CARD READER CONDUIT ROUTING SCALE: 1/32"=1'-0" 1 CARD READER FE ES GS CA CR CARD READER - 1" CONDUIT DISPERSION FENCE N SECURITY FENCE PROPERTY LINE TO FIRE / SAFETY PANEL NOTE: 1. DEVICE LOCATIONS ARE FOR REFERENCE ONLY FIELD DETERMINE FINAL LOCATION. 2. REFER TO STONE SECURITY FOR INSTALLATION DETAILS, WIRE TYPE, SIZE AND QTY. 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
GS GS GS GS GS GS CA CA CR CR CR CR CR FE FE FE ES ES ES CRES CR CR GS ES #1 #2 AT-90052 HS-90002 AT- 90053 AT-90002 HS-90004 AT-90054 AT-90055 AT-90003 AT-90056 AT-90058 AT-90004 AT-90057 HS-90005 #7 #10 #3 #3 #4 HS-90006 #5 #6 #2 HS-90003 AT-90001 GS ES AT-90051 HS-90001 FE CR CR #8 #9 DOUBLE LAMP SINGLE LAMP LEGEND CAMERA CONDUIT PLAN E5-02.05 NTS FIRE EYE EMERGENCY STOP GAS SENSOR CAMERA WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-02_Safety_Plan.dwg CAMERA CONDUIT ROUTING SCALE: 1/32"=1'-0" 1 CARD READER FE ES GS CA CR CAMERA - 1-1/4" CONDUIT DISPERSION FENCE N SECURITY FENCE PROPERTY LINE TO FIRE / SAFETY PANEL TO FIRE / SAFETY PANEL NOTE: 1. DEVICE LOCATIONS ARE FOR REFERENCE ONLY FIELD DETERMINE FINAL LOCATION. 2. REFER TO STONE SECURITY FOR INSTALLATION DETAILS, WIRE TYPE, SIZE AND QTY. 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
FE GS FE GS CA FE GS DETAILS E5-02.06 NTS WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-02_Safety_Plan.dwg DEVICE LOCATION ELEVATION POLE MOUNT DEVICE / ELEVATION SCALE = 1/4" - 1'-0" 1 DEVICE LOCATION ELEVATION LAMP STANDARD MOUNTING A B 6'-2" 10'-10" 22' GRADE SEAL CONDUIT DETAIL SCALE = 1/4" - 1'-0" 2 SEAL 3/4" FLEX 24" MAX LG 1" CONDUIT 1" CONDUIT 3/4" FLEX 24" MAX LG SEAL SEAL GRADE 1" CONDUIT 1. MOUNTING POLE NOT SHOWN 2. CLASS 1 WIRING - D/C 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
CLASSIFICATION LEGEND CLASS 1 DIVISION 2 AREA HAZARDOUS CLASSIFICATION AREAS SCALE 1/16" - 1'-0" CLASS 1 DIVISION 1 AREA DETAIL -A- -A- 10 FT SETBACK 208/120 XFMR 11 kVA GENERATOR AIR TANK 2 - 10 GAL PROPANE TANKS LIQUID NATURAL GAS AND PROPANE NOTES: -CLASS 1 DIV. 1 ALL BELOW GRADE SUMPS AND TRENCHES, 5' IN ALL DIRECTIONS OF VENTS, HOSES,& COUPLINGS -CLASS 1 DIV 2, 15' IN ALL DIRECTIONS OF PIPING, HOSES AND TANKS 480/277 XFMR HAZARDOUS AREA CLASSIFICATIONS SITE PLAN E5-10.01 1/16" = 1'-0" CONDENSING UNIT WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-10_ClassArea.dwg N CONTROL BUILDING ATTENDANT BUILDING 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
CLASSIFICATION LEGEND CLASS 1 DIVISION 2 AREA HAZARDOUS CLASSIFICATION AREAS - FRONT ELEVATION SCALE 1/8" - 1'-0" CLASS 1 DIVISION 1 AREA HAZARDOUS CLASSIFICATION AREAS - SIDE ELEVATION SCALE 1/8" - 1'-0" LAMP NOT IN HAZARDOUS AREA LIQUID NATURAL GAS AND PROPANE NOTES: -CLASS 1 DIV. 1 ALL BELOW GRADE SUMPS AND TRENCHES, 5' IN ALL DIRECTIONS OF VENTS, HOSES,& COUPLINGS -CLASS 1 DIV 2, 15' IN ALL DIRECTIONS OF PIPING, HOSES AND TANKS HAZARDOUS LOCATION AREAS FRONT & SIDE ELEVATION E5-10.02 1/8" = 1'-0" GRADE SEE SHEET E5-10.03 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-10_ClassArea.dwg DISPERSION FENCE 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
CLASSIFICATION LEGEND CLASS 1 DIVISION 2 AREA CLASS 1 DIVISION 1 AREA HAZARDOUS CLASSIFICATION AREAS - SIDE ELEVATION SCALE 1/8" - 1'-0" LIQUID NATURAL GAS AND PROPANE NOTES: -CLASS 1 DIV. 1 ALL BELOW GRADE SUMPS AND TRENCHES, 5' IN ALL DIRECTIONS OF VENTS, HOSES,& COUPLINGS -CLASS 1 DIV 2, 15' IN ALL DIRECTIONS OF PIPING, HOSES AND TANKS CONTAINMENT LAMP NOT IN HAZARDOUS AREA HAZARDOUS LOCATION AREAS SIDE ELEVATION - CONTINUED E5-10.03 1/8" = 1'-0" GRADE SEE SHEET E5-10.02 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-10_ClassArea.dwg DISPERSION FENCE LAMP BASES ELEVATED ABOVE HAZARDOUS CLASSIFICATION AREAS 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
20' 10' 6 2 1 16 15 14 8 13 10 9 4 CONTROL / COMPRESSOR BUILDING PLAN E7-00.01 1/2" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-00_Build_10x20.dwg 12 14 19 18 B D CA CONTROL BUILDING CIRCUIT RUNS SCALE 1/2" - 1'-0" 2CONTROL BUILDING EQUIPMENT PLAN SCALE 1/2" - 1'-0" 1 11 E7-00.02 3 E7-00.01 1 E7-00.02 4 E7-00.01 2 E7-00.02 CONTROL BUILDING FRONT ELEVATION SCALE 1/2" - 1'-0" 3 CONTROL BUILDING REAR ELEVATION SCALE 1/2" - 1'-0" 4 1416 15 10 UPS 9 CONTACTOR PANEL - CTP01 8 MANUAL TRANSFER SWITCH / 7 FIRE / SECURITY PANEL FS01 6 ATS PANEL - AST01 5 CONTROL PANEL - CP01 4 MAIN 480 / 277 V PANEL - PP01 3 AIR DRYER 2 WATER SEPARATOR 1 AIR COMPRESSOR 16 15 208 Y/ 120 PANEL - PB01 14 WIRE GUTTER 13 12 11 AIR HANDLER LEGEND DOOR WINDOW SURGE PROTECTOR MAIN DISCONNECT - MTS01 17 DC GROUND BAR CURRENT TRANSFORMER METER BASE 18 19 PHOTO CELL20 21 22 23 PHONE EMERGENCY PHONE CARD READER 24 FIRE PULL STATION 25 EMERGENCY STOP 26 TELCO GROUND BAR 27 TELEPHONE DE-MARK 28 NETWORK INTERFACE 29 TELCO ENTRANCE 30 IT CABINET (W/ DRIP PAN IF REQUIRED) NOTE 1. SURFACE MOUNT ALL CONDUIT AND EQUIPMENT 5 31 32 120 SUB-PANEL - PB02 ATS SUB-PANEL - ATS02 33 33 CONTACTOR PANEL - CTP02 = ITEMS PROVIDED BY TRANSFUELS * * * * * * * * * * * * 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
9 8 4 13 CONTROL / COMPRESSOR BUILDING EXTERIOR E7-00.02 1/2" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-00_Build_10x20.dwg 9 18 19 CONTROL BUILDING END VIEW SCALE 1/2" - 1'-0" 1 CONTROL BUILDING EQUIPMENT INTERIOR SCALE 1/2" - 1'-0" D SCALE 1/2" - 1'-0" A CONTROL BUILDING END VIEW SCALE 1/2" - 1'-0" 2 SCALE 1/2" - 1'-0" SCALE 1/2" - 1'-0" C 5 17 12 6 10 11 7 21 2 3 11 7 6 12 CONTROL BUILDING EQUIPMENT INTERIORB CONTROL BUILDING EQUIPMENT INTERIOR CONTROL BUILDING EQUIPMENT INTERIOR 16 15 GROUND FUTURE CONTROLS TO CLEAN 1 GROUND FROM ROI #1 6'-6" 33 (CONDUIT ROUTING FOR REFERENCE ONLY) 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
ATTENDANT BUILDING INTERIOR E7-00.03 1/2" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-00_Build_10x20.dwg 20' 10' 6 16 15 B D CA ATTENDANT BUILDING CIRCUIT RUNS SCALE 1/2" - 1'-0" 2ATTENDANT BUILDING EQUIPMENT PLAN SCALE 1/2" - 1'-0" 1 E7-00.04 3 E7-00.03 1 E7-00.04 4 E7-00.03 2 E7-00.04 ATTENDANT BUILDING FRONT ELEVATION SCALE 1/2" - 1'-0" 3 ATTENDANT BUILDING REAR ELEVATION SCALE 1/2" - 1'-0" 4 B D FE E7-00.04 24 22 25 23 16 6 12 7 30 15 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
ATTENDANT BUILDING ELEVATIONS E7-00.04 1/2" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-00_Build_10x20.dwg ATTENDANT BUILDING END ELEVATION SCALE 1/2" - 1'-0" 1 ATTENDANT BUILDING END ELEVATION SCALE 1/2" - 1'-0" 2 SCALE 1/2" - 1'-0" D SCALE 1/2" - 1'-0" A SCALE 1/2" - 1'-0" B ATTENDANT BUILDING EQUIPMENT INTERIOR SCALE 1/2" - 1'-0" D ATTENDANT BUILDING EQUIPMENT INTERIOR ATTENDANT BUILDING EQUIPMENT INTERIOR ATTENDANT BUILDING EQUIPMENT INTERIOR 6 7 11 7 30 16 15 11 15 14 21 27 29 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
ATTENDANT BUILDING ELEVATIONS E7-00.05 1/2" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-00_Build_10x20.dwg SCALE 1/2" - 1'-0" F SCALE 1/2" - 1'-0" E ATTENDANT BUILDING EQUIPMENT INTERIOR ATTENDANT BUILDING EQUIPMENT INTERIOR 30 15 31 32 27 28 26 29 SUB PANEL SUB PANEL 7 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
G 45KVA Pri: 480V Sec: 208Y/120V SERVICE ENTRANCE DS-1 ENTRANCE ATTENDANT BUILDING A/H A/H PB02 PB01 ATS01 CONTROLNET TO RIO #1 A/C POWER - P93101 / P93102 YS94101 / 94201, TOP TECH #1 & #2 YS 94102 / 94201- FIT 94101 / 94201 HEAT PUMP 02 HEAT PUMP 01 GATE MOTOR #1 / #2 GATE MOTOR #3 RIO CLEAN GROUND RETURN FIBER FROM WILLIAMS LIGHTING COMM CP01 CTP01 PP01 FS01 (FE / GS) CARD READER CARD READER IT ATS02 CONTROL BUILDINGCONTROL BUILDING CONTROL BUILDING BUILDING CONDUIT PLAN ROUTING E7-00.05 1/2" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-00_Build_10x20.dwg CTP02 (FE / GS) A/C POWER - RIO PWR SUPPLY ATTENDANT BUILDING - HS90003 A/C POWER CLASS 1 - A/C CLASS 1 - D/C FIT 90217 / 90218 / 90256 HS 90002 / 90001 / 90004 HS 90005 HS 90006 COMM CLASS 1 - D/C ATS - A/C POWER CLASS 1 - D/C TOP TECH #1 & #2 CAMERA CAMERA P93130 / P90230 A/C POWER NOTE: 1. CONTRACTOR SHALL BE RESPONSIBLE FOR SEPARATION OF CIRCUITS PER NEC 2. CONDUIT LOCATION FOR REFERENCE ONLY 3. HOME RUN ALL COMM AND I.S. CIRCUITS 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-10_RIO_Install.dwg REMOTE I/O ASSY EQUIPMENT INSTALLATION E7-10.01 1:8 PARTS LIST ITEM MATERIAL QTY PART NUMBER MFG 1 RIO ENCLOSURE CABINETS 1 THRU 3 3 SCE-24EL2408SSLP SAGINAW 2 POWER SUPPLY 5 1797-PS1N ALLEN BRADLEY 3 CONDUIT BOX, "T", 3/4" W/ COVER 5 EABT26 CROUSE HINDS 4 CONDUIT BODY, "LB", 3/4" W/COVER 2 LB27 CROUSE HINDS 5 CONDUIT BODY, "TB", 3/4" W/COVER 3 T27 CROUSE HINDS 6 CONDUIT FITTING, PULL ELBOW, M - F, 3/4" 5 811 CROUSE HINDS 7 CONDUIT SEAL 3/4" MALE 10 EYS21 CROUSE HINDS 8 CONDUIT SEAL 1/2" MALE 2 EYS11 CROUSE HINDS 9 MYERS HUB 3/4" 3 ST2 CROUSE HINDS 10 MYERS HUB 1/2" 4 ST1 CROUSE HINDS 11 BUSHING, 3/4" M - 1/2" F 11 XXXX CROUSE HINDS 12 UNION 3/4" M 5 UNY205 CROUSE HINDS 13 UNION 1/2" M 9 UNY105 CROUSE HINDS 14 CLOSE NIPPLE, 3/4" 5 HARDWARE 15 STRUT NUT 3/8-16 UNC, S.S. 8 P3008U UNISTRUT 16 STRUT NUT 1/4-20 UNC, S.S. 15 P3006U1420 UNISTRUT 17 HHCS 3/8-16 UNC X 1-1/2" S.S. 8 HARDWARE 18 HHCS 1/4-20 UNC X 1-1/2" S.S. 15 HARDWARE NOTE: 1. ASSEMBLY TO BE INSTALLED IN C1,D1 AREA. 2. ALL NON I.S. WIRING SHALL BE INSTALLED IN ACCORDANCE WITH NEC ARTICLES 500 AND 501 (C1, D1). 3. PLUG ALL UNUSED CONDUIT OPENINGS. 4. ALL CONDUITS TO BE SIDE OR BOTTOM ENTRY. 5. RIGID CONDUIT TO BE INSTALLED PER NEC ARTICLE 342 OR 344. 6. ALL INTRINSICALLY SAFE WIRING SHALL BE INSTALLED AND LABELED PER NEC ARTICLE 504. 1 REMOTE I/O EQUIPMENT ASSY SCALE: 1:8 2 TANK 903 7 4 14 6 7 3 1 12 8 10 13 4 5 11 SECTION -A- SCALE: 1:4 SECTION -B- SCALE: 1:4 SECTION -C- SCALE: 1:4 A - C - B - 5 14 6 4 10 8 13 11 RIO FRAME ASSY MOUNTED TO TANK SKID SEE DWG E7-10.02 16 18 16 18 (MOUNT WITH) 15 17 (MOUNT WITH) (MOUNT WITH) 13 9 10 12 CLASS 1 WIRING GROUND RETURN TO PROCESS CONTROL CLEAN GROUND COMM WIRING CLASS 1 WIRING CLASS 1 WIRING I.S. WIRING I.S. WIRING I.S. WIRING I.S. WIRING I.S. WIRING I.S. WIRING 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-10_RIO_Install.dwg REMOTE I/O ASSY RIO FRAME INSTALLATION E7-10.02 1:8 PARTS LIST ITEM PART QTY PART NUMBER MFG 1 RIO FRAME ASSY 1 E7-10.05 CUSTOM 2 HHCS, 1/2-13 UNC, HDG 12 HARDWARE 3 WASHER 1/2 PLAIN, HDG 12 HARDWARE NOTE: 1. INSTALL RIO SUPPORT FRAME ON TANK SKID 903 2. DIMENSIONAL TOLERANCE = +/- 1/16" A - 3 DRILL AND TAP MOUNTING ARM 1/2-13 UNC (2 PL EACH MOUNTING POINT, MATCH PATTERN IN STRUT)11" 1 RIO FRAME INSTALLATION SCALE: 1:8 SECTION -A- SCALE: 1:8 1 2 (MOUNT WITH) RIO MOUNTING ARM MOUNTED TO TANK SKID 903 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-10_RIO_Install.dwg TransFuels LLC 3760 Commons Lane, Salt Lake City, UT 84104 PLYMOUTH BULK LNG TRANSFER STATION REMOTE I/O ASSY SUPPORT ARM INSTALLATION PLYMOUTH, WA 110.47.0001 E7-10.03 1:8 CWP 12-4-13 BKR JCC DM NOTE: 1. INSTALL RIO SUPPORT FRAME ON TANK SKID TK903 2. DIMENSIONAL TOLERANCE = +/- 1/16" 2 SUPPORT ARM INSTALLATION SCALE: 1:8 1 SKID FRAME HOLE LOCATIONS SCALE: 1:8 SECTION -B- SCALE: 1:8 A - 1'-81 2" 4" INSTALL ALL SUPPORT ARMS FLUSH TO THIS SURFACE 2" 4" 3 4 4'-105 8"31 2" 31 2" DRILL AND TAP 1/2-13 NC (8 PL) (16 PL) INSTALL ALL SUPPORT ARMS FLUSH TO THIS SURFACE SECTION -A- SCALE: 1:8 B - 3 43 ALIGN WITH LOWER SUPPORT MOUNTING POINT (REF) 10' 1 2 PARTS LIST ITEM PART QTY PART NUMBER MFG 1 RIO FRAME MOUNT ARM 3 E7-10.06-1 CUSTOM 2 STRUT BRACKET 2 P2945HG UNISTRUT 3 HEX HD BOLT 1/2-13 UNC X 2" HDG - A307 OR A563 28 HARDWARE 4 SQ MACHINE NUT, 1/2-13 UNC HDG - A307 OR A563 12 HARDWARE RIO FRAME MOUNT ARM MOUNTED TO TANK SKID 903 INSTALLATION OPTION - NOTE: A. IN LIEU OF DRILLING AND TAPPING FRAME COMPONENTS, FIELD INSTALLATION WELDING OF SUPPORTS SHALL BE ACCEPTABLE. B. IF FIELD WELDING IS OPTIONED, OMIT ALL MOUNTING HOLES. C. FOLLOW FINISH SPECIFICATIONS. (DO NOT OMIT) 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-10_RIO_Install.dwg REMOTE I/O ASSY LOWER SUPPORT INSTALLATION E7-10.04 1:8 PARTS LIST ITEM PART QTY PART NUMBER MFG 1 LOWER SUPPORT BRACKET 2 E7-10.06-2 2 LOWER SUPPORT 1 E7-10.06-3 3 HEX HD BOLT 1/2-13 UNC X 2" HDG - A307 OR A563 16 4 SQ MACHINE NUT, 1/2-13 UNC HDG - A307 OR A563 8 5 WASHER 1/2, HEAVY, HDG - A307 OR A563 16 NOTE: 1. INSTALL RIO SUPPORT FRAME ON TANK SKID TK-903 2. DIMENSIONAL TOLERANCE = +/- 1/16" 2 LOWER SUPPORT INSTALLATION SCALE: 1:8 1 MOUNTING BRACKET INSTALLATION SCALE: 1:8 SECTION -B- SCALE: 1:8 SECTION -A- SCALE: 1:8 A - B - 1'-81 2" 4" INSTALL FLUSH WITH FACE OF SUPPORT LEG INSTALL FLUSH WITH FACE OF SUPPORT LEG 1'-01 2" (REF) DRILL AND TAP SUPPORT LEG 1/2-13 UNC (REF) 2" 2 3 16" 4" 1 23 4 5 35 5 16" RIO FRAME SUPPORT MOUNTED TO TANK SKID 903 INSTALLATION OPTION - NOTE: A. IN LIEU OF DRILLING AND TAPPING FRAME COMPONENTS, FIELD INSTALLATION WELDING OF SUPPORTS SHALL BE ACCEPTABLE. B. IF FIELD WELDING IS OPTIONED, OMIT ALL MOUNTING HOLES. C. FOLLOW BLU LNG FINISH SPECIFICATIONS. 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-10_RIO_Install.dwg REMOTE I/O ASSY RIO FRAME ASSY E7-10.05 1:8 2'-01 4" 4'-65 8 " 6'-63 4" 9'-11 4" 11'-13 8 " 13'-91 2" 1'-71 8 " (REF) 2'-27 8" 1'-115 8"(REF) 2'-47 8" (REF) 2'-47 8" (REF) 1'-101 2" (REF) 1'-101 2" (REF) 1'-101 2" (REF) 2'-47 8" PARTS LIST ITEM MATERIAL QTY PART NUMBER MFG 1 STRUT 1-5/8 X 1-5/8 X 165.5 2 P1000THG UNISTRUT 2 STRUT 1-5/8 X 1-5/8 X 23.-5/8 7 P1000THG UNISTRUT 3 STRUT 1-5/8 X 1-5/8 X 28-7/8 3 P1000THG UNISTRUT 4 STRUT 1-5/8 X 1-5/8 X 22-1/2 3 P1000THG UNISTRUT 5 BRACKET - L 4 HOLE 4 P1380AHG UNISTRUT 6 BRACKET - L 3 HOLE 2 P1036HG UNISTRUT 7 BRACKET - T 4 HOLE 15 P1031HG UNISTRUT 8 HHCS 1/2-13 UNC X 1-1/2, S.S. 82 HARDWARE 9 STRUT NUT 1/2-13 UNC, S.S. - TOP RETAINER 82 P4010UT UNISTRUT NOTE: 1. STRUT TO BE HOT DIP GALVANIZED 2. BREAK ALL SHARP EDGES, ROUND ALL CORNERS 3. FINISH ALL CUT ENDS WITH MFG APPROVED GALVANIZING COATING 4. HARDWARE AND FASTENERS TO BE STAINLESS STEEL 1 REMOTE I/O FRAME ASSY SCALE: 1:8 125 7 3 6 4 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-10_RIO_Install.dwg REMOTE I/O ASSY FRAME COMPONENTS E7-10.06 AS NOTED PARTS LIST ITEM PART QTY PART NUMBER MFG 1 RIO FRAME MOUNT ARM 3 E7-10.06-1 CUSTOM 2 LOWER SUPPORT BRACKET 2 E7-10.06-2 CUSTOM 3 LOWER SUPPORT 1 E7-10.06-3 CUSTOM NOTE: 1. PREP ALL JOINTS AND WELDS PER AWS STANDARDS 2. BREAK ALL SHARP EDGES, ROUND ALL CORNERS 3. SURFACE PREP AND PAINT ALL CARBON STEEL COMPONENTS: 3.1. PER BLU LNG SPEC. 100.00.0001.G2007 4. DIMENSIONAL TOLERANCES = +/- 1/16" 5" 5" 2" 2" 1" 4" 9 16" 13 8 " 2" 2" 4" 1'-01 2" 1'-011 32 " 2" 1'-101 2" 6" 4" 1 4" 4" 6" 1 RIO FRAME MOUNTING ARM SCALE: 1:4 MATERIAL: A36, 2 x 4 x 1/4 TUBE 2 LOWER SUPPORT BRACKET 3 LOWER SUPPORT SCALE: 1:4 MATERIAL: A36, 5 x 5 x 5/16 ANGLE SCALE: 1:8 MATERIAL: A36, 8 x 13.75 CHANNEL 4'-41 4" 23 8" 8".303 1/8 5 8" X 7/8" 2" 4" 5 8 " (REF) 1'-81 2" 2" 1/4 1/4 TYP TYP TYP 1/4 1/4 1/4 1/4 NOTE: INSTALLATION OPTION A. IN LIEU OF DRILLING AND TAPPING FRAME COMPONENTS, FIELD INSTALLATION WELDING OF SUPPORTS SHALL BE ACCEPTABLE. B. IF FIELD WELDING IS OPTIONED, OMIT ALL MOUNTING HOLES. C. FOLLOW BLU LNG FINISH SPECIFICATIONS. 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-10_RIO_Install.dwg CABLE TRAY INSTALLATION PLAN E7-20.01 AS NOTED CWP 12-19-13 BKR JCC DM PARTS LIST ITEM PART QTY PART NUMBER MFG 1 CABLE TRAY, 6", STRAIGHT A/R 24A06-06-144 B-LINE 2 CABLE TRAY, 6", 45 deg H 6 4A-06-45-HB12 B-LINE 3 CABLE TRAY, 6", 30 deg V, UP 2 4A-06-30VI-12 B-LINE 4 CABLE TRAY, 6", 30 deg V, DOWN 2 4A-06-30VO-12 B-LINE 5 TRAPEZE SUPPORT KIT, HD GALV w/ SS HDWR A/R 9P-5506-22SH B-LINE 6 THREADED ROD, 1/2" UNC, SS A/R ATR 1/2" SS HARDWARE 7 CONDUIT / CABLE TRAY ADAPTER, 1/2" A/R 9ZN-1155-1/2 B-LINE 8 CONDUIT / CABLE TRAY ADAPTER, 3/4" A/R 9ZN-1155-3/4 B-LINE 9 CONDUIT / CABLE TRAY ADAPTER, 1" A/R 9ZN-1155-1 B-LINE 10 CONDUIT / CABLE TRAY ADAPTER, 1-1/4" A/R 9ZN-1155-1-1/4 B-LINE 11 CANTILEVER BRACKET, 12" 8 B409-12 HDG B-LINE 12 CANTILEVER BRACKET, 24" 4 B409-24 HDG B-LINE 13 STRUT 1-5/8 X 1-5/8 HDG, SLOTTED A/R P1000T HDG UNISTRUT 14 STRUT 1-5/8 X 7/8 HDG, SLOTTED A/R P3300T HDG UNISTRUT B E7-20.02 A E7-20.02 CABLE TRAY TO BE MOUNTED VERTICALLY TO STRUT SUPPORTS IN TRENCH NOTE: 1. INSTALLATION OF CABLE TRAY AND SECURING OF CABLES SHALL BE PER NEC 392 AND 504. 2. ALL CABLE INSTALLED IN CABLE TRY TO BE I.S. CABLING 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-10_RIO_Install.dwg CABLE TRAY INSTALLATION CABLE TRAY SUPPORT E7-20.02 AS NOTED NOTE: 1. MOUNT ALL CABLE TRAY IN ACCORDANCE WITH MFG REQUIREMENTS 2. BREAK ALL SHARP EDGES, ROUND ALL CORNERS 3. FINISH ALL CUT EDGES WITH MFG APPROVED COATING. 4. INSTRISICALLY SAFE CONDUCTORS TO ENTER CABLE TRAY VIA CONDUIT AND SUPPORTED WITH CONDUIT - CABLE TRAY ADAPTERS. B CABLE TRAY INSTALLATION ELEVATION SCALE: 1/4" = 1'-0" 10' 7'7' TRANSITION TO TOP OF PIPE SUPPORTS SUPPLY ADDITIONAL SUPPORT AS REQUIRED (TYPICAL EACH END) ROUTE CABLE TRAY UNDER SUPPORT FRAME TO AVOID PERSONNEL LADDER SUPPLY SUPPORT MID-SPAN OF TRANSITION (TYPICAL EACH END) (REF) (TYP) (REF) 10' 10' ALIGN CABLE TRAY TO PIPE SUPPORTS (TYPICAL EACH END) SECTION -D- SCALE: 1/4" = 1'-0" SECTION -C- SCALE: 1/4" = 1'-0" ROUTE CABLE TRAY ON TOP OF PIPE SUPPORTS TO PUMP PIT FOR SUPPORTING INTRINSICALLY SAFE CABLES ROUTE CABLE TRAY ON TOP OF PIPE SUPPORTS TO METERING SKID FOR SUPPORTING INTRINSICALLY SAFE CABLES D E7-20.01 1 CABLE TRAY INSTALLATION ENLARGED PLAN SCALE: 1/4" = 1'-0" INSTALL STRUT TO TOP OF PIPE SUPPORT FOR SECURING CABLE TRAY (TYPICAL) A CABLE TRAY INSTALLATION TRENCH SECTION SCALE: 1" = 1'-0" ROUTE CABLE TRAY ON STRUT SUPPORTS IN TRENCH FOR SUPPORTING INTRINSICALLY SAFE CABLES C E7-20.01 12 1 ROUTE CONDUITS ON STRUT SUPPORTS IN TRENCH (TYP) 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
SITE PLAN SCALE = 500:1 SITE LAYOUT E9-00.02 500:1 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E9-00_Cover.dwg N 300 kVA PRI: 12470 V SEC: 480Y/277 V DISPERSION FENCE PROPERTY LINE PROPERTY LINE LNG STORAGE TANKS 1617 DISPERSION FENCE ENTRY / EXIT SLIDE GATES PEDESTRIAN GATE PEDESTRIAN GATE WILLIAMS ENTRY / EXIT SLIDE GATE CONTROL BUILDING ATTENDANT BUILDING 1 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615

More Related Content

PDF
Fire Protection Sample
Wuillian Medrano
 
PDF
Revit Steel Shop Drawings - Tower
Wuillian Medrano
 
PDF
Cad samples
Wuillian Medrano
 
PDF
2013 mechanical project titles
Ecway Technologies
 
PDF
03 feam%20 cable%20glands_eng
Hai Pham
 
PDF
24hrs fitness escondido for fabrication
Wuillian Medrano
 
PDF
SAMPLE REVIT DRAWINGS-SUNIT K DHINGRA-COMPLETE - URS
Sunit Dhingra
 
PPTX
Glass level gauges 2015 rev 0
cherylteooo
 
Fire Protection Sample
Wuillian Medrano
 
Revit Steel Shop Drawings - Tower
Wuillian Medrano
 
Cad samples
Wuillian Medrano
 
2013 mechanical project titles
Ecway Technologies
 
03 feam%20 cable%20glands_eng
Hai Pham
 
24hrs fitness escondido for fabrication
Wuillian Medrano
 
SAMPLE REVIT DRAWINGS-SUNIT K DHINGRA-COMPLETE - URS
Sunit Dhingra
 
Glass level gauges 2015 rev 0
cherylteooo
 

What's hot (16)

PDF
SAMPLE REVIT DRAWINGS-SUNIT K DHINGRA-COMPLETE - CAPITA
Sunit Dhingra
 
PPTX
Bi colour sept 2013 - rev 1
cherylteooo
 
PDF
Granzow Magnetic Level Indicator for Industrial Process Measurement
Mountain States Engineering and Controls
 
PDF
Cap 011704.pdf
Samuel Alejandro Vidaurre
 
PDF
Drawing samples 1063, 1670, 1673, 1674 SolidWorks ACAD
Gary mccoy
 
PDF
Feam EJB INX Zone 1 & Zone 2 Enclosures (Atex) Hazardous Area
Thorne & Derrick International
 
PDF
QC CASE STUDY: PREVENT OR REDUCE CHOCKING OF RC FEEDER#G AND MILL#G CENTRE PIPE
RAVI PAL SINGH
 
PDF
P2
Bryce Sigourney
 
PDF
FEAM Enclosures - Hazardous Area & Explosion Proof Enclosures (ATEX, IECEx, I...
Thorne & Derrick International
 
PDF
Electrical standard symbols
asifsalafy
 
PDF
Symbols.pdf
Shashank Thawkar
 
PDF
Duro-Sense Temperature Sensor Catalog
Duro-Sense Corporation
 
PDF
1 sv
Audy Elusionman
 
PDF
LDavis_work_examples
Loren Davis
 
PDF
Brochure van-dien-tu-pgv-1-12inc-2inc
Nhà Bè Agri
 
PDF
FEAM Lighting - Hazardous Area & Explosion Proof Lighting
Thorne & Derrick International
 
SAMPLE REVIT DRAWINGS-SUNIT K DHINGRA-COMPLETE - CAPITA
Sunit Dhingra
 
Bi colour sept 2013 - rev 1
cherylteooo
 
Granzow Magnetic Level Indicator for Industrial Process Measurement
Mountain States Engineering and Controls
 
Cap 011704.pdf
Samuel Alejandro Vidaurre
 
Drawing samples 1063, 1670, 1673, 1674 SolidWorks ACAD
Gary mccoy
 
Feam EJB INX Zone 1 & Zone 2 Enclosures (Atex) Hazardous Area
Thorne & Derrick International
 
QC CASE STUDY: PREVENT OR REDUCE CHOCKING OF RC FEEDER#G AND MILL#G CENTRE PIPE
RAVI PAL SINGH
 
P2
Bryce Sigourney
 
FEAM Enclosures - Hazardous Area & Explosion Proof Enclosures (ATEX, IECEx, I...
Thorne & Derrick International
 
Electrical standard symbols
asifsalafy
 
Symbols.pdf
Shashank Thawkar
 
Duro-Sense Temperature Sensor Catalog
Duro-Sense Corporation
 
1 sv
Audy Elusionman
 
LDavis_work_examples
Loren Davis
 
Brochure van-dien-tu-pgv-1-12inc-2inc
Nhà Bè Agri
 
FEAM Lighting - Hazardous Area & Explosion Proof Lighting
Thorne & Derrick International
 
Ad

Similar to ProcContSite (20)

PDF
Project sagarmala presentation jmv lps
Mahesh Chandra Manav
 
PDF
2. Heat Shrink Cable Termination (HV) - 11kV 33kV Single Core XLPE BS6622 Cables
Thorne & Derrick International
 
PDF
Axis catalogue 2018 - Chống sét
Tra Thanh
 
PDF
Blackall 66-22kV Substation Package for Ergon Energy
Gary Hayes
 
PPTX
Fundamentals of Electrical Services Design
TuhinHossain37
 
PDF
Electrical Products and Human Live safety Umbrealla(SACHET) NBC2016
Mahesh Chandra Manav
 
PDF
Presentation water way journey by jmv lps
Mahesh Chandra Manav
 
PDF
Smico insulation piercing connector
Ivy Huang
 
PDF
Recycled water project draft plans and specifications
kristinemassey
 
PDF
Presentation mecon project by jmv lps
Mahesh Chandra Manav
 
PPT
Bldg-Electrical, proper knowledge's. .ppt
MaherzMendoza
 
PDF
PV Array
Clyde Porter
 
PPT
Catalog busbar ls 06. busduct presentation e series rev 2
Dien Ha The
 
PPT
Catalog busbar ls 06. busduct presentation e series rev 2
Dien Ha The
 
PDF
1902 01_SouthSide Works_Sheet - E400 - ELECTRICAL RISER DIAGRAM
Chad Kurdi, P.E.
 
PDF
Electrical safety presentation by jmv railway and invitation ireee2019 at ...
Mahesh Chandra Manav
 
PDF
catalogue-lightning-protection.pdf
liborto
 
PDF
Structural Earthing Drawings.pdf
SomnathDutta63
 
PDF
Iec 62305 for lightning and surge protection follow in india nbc 2016 by bis(...
Mahesh Chandra Manav
 
PDF
Instruction- 3 Core Polymeric (XLPE EPR) 6.6kV-7.2kV Heat Shrink Cable Termin...
Thorne & Derrick International
 
Project sagarmala presentation jmv lps
Mahesh Chandra Manav
 
2. Heat Shrink Cable Termination (HV) - 11kV 33kV Single Core XLPE BS6622 Cables
Thorne & Derrick International
 
Axis catalogue 2018 - Chống sét
Tra Thanh
 
Blackall 66-22kV Substation Package for Ergon Energy
Gary Hayes
 
Fundamentals of Electrical Services Design
TuhinHossain37
 
Electrical Products and Human Live safety Umbrealla(SACHET) NBC2016
Mahesh Chandra Manav
 
Presentation water way journey by jmv lps
Mahesh Chandra Manav
 
Smico insulation piercing connector
Ivy Huang
 
Recycled water project draft plans and specifications
kristinemassey
 
Presentation mecon project by jmv lps
Mahesh Chandra Manav
 
Bldg-Electrical, proper knowledge's. .ppt
MaherzMendoza
 
PV Array
Clyde Porter
 
Catalog busbar ls 06. busduct presentation e series rev 2
Dien Ha The
 
Catalog busbar ls 06. busduct presentation e series rev 2
Dien Ha The
 
1902 01_SouthSide Works_Sheet - E400 - ELECTRICAL RISER DIAGRAM
Chad Kurdi, P.E.
 
Electrical safety presentation by jmv railway and invitation ireee2019 at ...
Mahesh Chandra Manav
 
catalogue-lightning-protection.pdf
liborto
 
Structural Earthing Drawings.pdf
SomnathDutta63
 
Iec 62305 for lightning and surge protection follow in india nbc 2016 by bis(...
Mahesh Chandra Manav
 
Instruction- 3 Core Polymeric (XLPE EPR) 6.6kV-7.2kV Heat Shrink Cable Termin...
Thorne & Derrick International
 
Ad

ProcContSite

  • 1. Utility Pole M Meter Enclosure 300KVA Pri: 12,470 Sec: 480Y/277 34 k AIC UTILITY CUSTOMER CONNECTION FOR STANDBY GENERATOR MTS-01 MANUAL TRANSFER SWITCH SERVICE ENTRANCE RATED 6-250kcmil + 2-1/0 GND 2-2.5" Conduit SURGE SUPPRESSION 6-250kcmil + 1/0 N + 1/0 GND 2-2.5" CONDUIT 1/0 AWG GND 45KVA Pri: 480V Sec: 208Y/120V1/2" CONDUIT (TYP) PP-01 480Y/277 PANELBOARD 600 AMP SITE LIGHTING PC 3 - #4 + #8 GND 1" CONDUIT 3 - 250 kcmil + #4 GND 2.5" CONDUIT PB-01 208Y/120V PANEL BOARD Ii=38.9A Io=43A Ii=38.9A Io=43A SC 93101 SC 93102 3 - #10 + #10 GND 3/4" CONDUIT 35-50A 3P 3 - 2/0 + 2/0 N + #6 GND 2" CONDUIT CLASS 1 DIVISION 1 GROUP D AREA CP-01 480V CONTROL PANEL M M M M 3 #18 AWG 0.5A 3P CONTROL BUILDING CONTROL BUILDING HEAT PUMP 12.6 kVA 60.7 FLA ATTENDANT BUILDING HEAT PUMP 12.6 kVA 60.7 FLA SUMP PUMP 1 SUMP PUMP 2 ATS-01 240/120V (AUTO TRANSFER SWITCH) PANEL BOARD CONTROL BUILDING LIGHTING CONTROL BUILDING UPS SITE LIGHTING 3 - #6 AWG +1- #8 AWG GND 1" CONDUIT GENERATOR 11 kW 45.8 FLA 3 - #10 + #10 GND 3/4" CONDUIT 3 - #6 + #10 GND 3/4" CONDUIT 3 - #6 + #10 GND 3/4" CONDUIT 2 #12 AWG + 1 #14 AWG GND 1/2" CONDUIT 2 #14 AWG + 1 #14 AWG GND 1/2" CONDUIT 2 - #6 AWG + 1 #8 AWG GND 3/4" CONDUIT 2 - #12 AWG + 1 #12 AWG GND 1/2" CONDUIT PB-02 120 V SUB-PANEL ATS-02 ATS SUB-PANEL ATTENTANT BUILDING OUTLETS ATTENDANT BUILDING LIGHTING COMPUTER UPS OUTLET 2 #14 AWG + 1 #14 AWG GND 1/2" CONDUIT 2 #12 AWG + 1 #12 AWG GND 1/2" CONDUIT 2 #12 AWG + 1 #12 AWG GND 1/2" CONDUIT 2 #14 AWG + 1 #14 AWG GND 1/2" CONDUIT 2 #14 AWG + 1 #14 AWG GND 1/2" CONDUIT ATTENDANT BUILDING SUB-PANEL 2 #6 AWG + 1 # 6 AWG + #10 GND 1/2" CONDUIT CONTROL BUILDING AIR HANDLER ATTENDANT BUILDING AIR HANDLER ATTENDANT BUILDING SUB-PANEL 2 #6 AWG + 1 # 6 AWG + #10 GND 1/2" CONDUIT ATTENDANT BUILDING IT CABINET SUPPLY ATTENTANT BUILDING OUTLETS 2 #12 AWG + 1 #12 AWG GND 1/2" CONDUIT SERVICE POINT ATTENTANT BUILDING OUTLETS 2 #14 AWG + 1 #14 AWG GND 1/2" CONDUIT 2 #12 AWG + 1 #12 AWG GND 1/2" CONDUIT G PC MLO MLO 35-50A 3P 30A 3P MLO MAIN GATE OPERATOR (EXIT) 2 #12 AWG + 1 #12 AWG GND 1/2" CONDUIT WILLIAMS GATE OPERATOR 2 #12 AWG + 1 #12 AWG GND 1/2" CONDUIT MLO MAIN GATE OPERATOR (ENTER) 2 #12 AWG + 1 #12 AWG GND 1/2" CONDUIT Note 1 Note 1 Note 1 Note 1 30A 3P FIRE/SAFETY PANEL 2 #14 AWG + 1 #14 AWG GND 1/2" CONDUIT CTP01 CTP01 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E2-01_One-Line.dwg POWER DISTRIBUTION ONE-LINE / SCHEMATIC E2-01.01 NTS 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 2. SITE GROUNDING PLAN SCALE 1/32" - 1'-0"LEGEND GROUND ROD EXOTHERMIC WELD BOLTED COMPRESSION COUPLING LIGHTNING ROD GROUNDING PLAN SITE LAYOUT E2-02.01 1/32" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E2-02_Ground.dwg 2 E2-02.02 3 E2-02.02 2 E2-02.04 1 E2-02.03 1 E2-02.02 (2) 20 GAL. PROPANE TANKS AIR TANK 11 kVA GENERATOR 480Y/277 V TRANSFORMER 208Y/120 V TRANSFORMER CONTROL BUILDING HEAT PUMP ATTENDANT BUILDING HEAT PUMP DISPERSION FENCE SECURITY FENCE PROPERTY LINE DISPERSION FENCE GENERAL NOTE: 1. SEE SHEET E2-02.04 FOR NOTES 2. SEE SHEET E2-02.04 FOR CADWELD TYPES 3. SEE SHEET E2-02.04 FOR PARTS LIST 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 3. TANK AREA EARTH GROUNDING PLAN SCALE 1/8" - 1'-0" LEGEND GROUND ROD EXOTHERMIC WELD BOLTED COMPRESSION COUPLING GROUNDING ENLARGED PLAN E2-02.02 1/8" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E2-02_Ground.dwg 4 E2-02.04 1 2 1 2 1 2 1 1 2 2 2 TO EQUIPMENT BUILDING TO METERING SKID 1 3 E2-02.04 4 E2-02.03 20' 2 E2-02.04 TO LAMP POLE GENERAL NOTE: 1. SEE SHEET E2-02.04 FOR NOTES 2. SEE SHEET E2-02.04 FOR CADWELD TYPES 3. SEE SHEET E2-02.04 FOR PARTS LIST 3 E2-02.04 1 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 4. GROUNDING ELEVATION / DETAILS E2-02.03 1/8" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E2-02_Ground.dwg 2' MIN #2 SOLID BARE TINNED COPPER TO GROUND ROD OR GROUND RING PER PLAN 1" PVC ON FACE OF CONCRETE SECURE PER CODE CADWELD GROUND STRAP BETWEEN GATE AND POST 1" PVC EMBEDDED IN CONCRETE #2 SBTC 5/8" x 10' GND ROD 2 LAMP POST GROUNDING SCALE 1/4" - 1'-0" 3 SWING GATE GROUNDING SCALE 1/4" - 1'-0" 5/8" x 10' GND ROD 2' MIN 4 TYPICAL SKID GROUNDING SCALE 1/2" - 1'-0" #2 SBTC TO GROUND RING 2 HOLE COMPRESSION LUG SS BOLT, NUT & STAR LOCK WASHER REMOVE PAINT AND APPLY ANTI-OXIDIZING COMPOUND PVC PIPE EMBEDDED IN CONCRETE BUILDING EARTH GROUNDING PLAN SCALE 1/8" - 1'-0" CLEAN GROUND FOR PROCESS INTERFACE BUILDING 1 1 TO TANK AREA 2 2 1 2 2 2 2 1 2 TO DC GROUND BAR IN PROCESS INTERFACE BUILDING 20' 1 LEGEND GROUND ROD EXOTHERMIC WELD BOLTED COMPRESSION COUPLING GENERAL NOTE: 1. SEE SHEET E2-02.04 FOR NOTES 2. SEE SHEET E2-02.04 FOR CADWELD TYPES 3. SEE SHEET E2-02.04 FOR PARTS LIST 1 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 5. TANK 902 / 92202 TANK 901 / 92102 TANK 903 / 92302 Type GY Type TA Type SS Type VB Type VS GROUNDING ELEVATION / DETAILS E2-02.04 1/8" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E2-02_Ground.dwg 3 LNG TANK BASE GROUNDING (TYP) SCALE 1/4" - 1'-0" 2 TO GROUND RING PVC PIPE ON FACE OF CONCRETE SECURE PER CODE EXOTHERMIC WELD 2 TO GROUND RING PVC PIPE ON FACE OF CONCRETE EXOTHERMIC WELD 2 LNG TANK SKID GROUNDING (TYP) SCALE 1/4" - 1'-0" EXOTHERMIC WELD #2 SBTC 1' PVC ON FACE OF CONCRETE (TYPICAL EACH FRAME) BOND CONDUIT TO GROUND RING (TYPICAL) BOND RIO FRAME TO STEEL FRAME 4 LNG TANK PROCESS EQUIPMENT FRAME GROUNDING SCALE 1/2" - 1'-0" BOND CABLE TRAY TO STEEL FRAME (TYPICAL EACH FRAME SUPPORT) A CADWELD TYPE GR ERICO B CADWELD TYPE GT ERICO C CADWELD TYPE GY ERICO D CADWELD TYPE TA ERICO E CADWELD TYPE SS ERICO F CADWELD TYPE VB ERICO G CADWELD TYPE VS ERICO H CADWELD TYPE HA ERICO J CADWELD TYPE PG ERICO EXOTHERMIC WELD TYPES NOTE: SEE ERICO CADWELD APPLICATION GUIDE FOR PROPER MOLD AND WELD METAL INFORMATION 1 PARTS LIST ITEM MATERIAL QTY PART NUMBER MFG 1 2/0 STRANDED BARE TINNED COPPER A/R 2 #2 SOLID BARE TINNED COPPER A/R 3 GROUNDING STRAPS A/R 99-N1 B-LINE 4 5/8" X 10' COPPER CLAD GROUND RODS A/R 5 1" DIA PVC PIPE A/R 6 GROUNDING CLAMP, RIGID CONDUIT A/R 7 ANTI OXIDIZING COMPOUND, CU/STL A/R 8 ANTI-OXIDIZING COMPOUND, CU/ALU A/R 9 10 NOTE: 1. FOLLOW ALL LOCAL CODES FOR GROUNDING ALL DEVICES 2. PARTS LIST ON SHT E2-02.02 3. REMOVE PAINT AND USE OXIDATION PROHIBITING COMPOUND ON ALL MECHANICAL CONNECTIONS 4. TOP OF GROUND ROD TO BE 24" MIN. BELOW GRADE 5. GROUND RODS TO BE PLACED 20' ON CENTER MAX. JUMPER CABLE TRAY (TYPICAL) 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 6. PANEL SCHEDULE PANEL PP-01 VOLTS 480/277 PHASE 3 WIRE 4 CAT. NO. LOCATION CONTROL BUILDING MOUNTING FLUSH SURFACE FEED TOP BOTTOM MAINS AMPERE RATING600 LUGS ONLY AMP BKR. FEEDER CKT NO. AMPS POLE DESCRIPTION WATTS LOAD A B C WATTS DESCRIPTION CKT NO. POLE AMPS 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 20 3 3 ----- ----- SITE LIGHTNING ----- ----- SITE LIGHTING ----- -K - - - - - - 45KVA TRANSFORMER ----- ----- ----- SITE LIGHTING SPARE ----- 023 100 04 06 083 20 10 12 143 20 16 18 20 22 24 26 28 30 TOTALS: AMPS PER PHASE -- --- -- TOTAL WATTS ---K AVERAGE AMPS --- NOTES: 1. PANEL LP-01 SHALL BE WITHIN 25 FT. OF THE 45KVA TRANSFORMER. 2. ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR CONDUITS AND WIRING INSIDE OF CONTROL BUILDING FOR LIGHTS, OUTFITS, HVAC, NETWORK PANEL, F.A.C.P., ETC... -K -K -K -K -K -K -K -K -K -K -K -K -K -K -K -K -K -K -K - - - - - - - - - - - - - - - - - - - - - - - - -K -K -K -K -K -K -K -K -K -K ----- ----- ----- ----- ----- ----- X 20 ----- ----- ----- ----- X FEEDER MAIN 480v PANEL MAIN 120/208v PANEL CONTROL BUILDING CONDUIT 1 - 2" CIRCUIT NO. WIRE 3- 2/0, 1- 2/0 N / 1- #6 G CONDUIT 2- 2-1/2" CIRCUIT NO. WIRE 6- 250, 1/0 N, 1/0 G 250 3 PUMP OPERATOR PANEL CP-01 ----- ----- ----- PANEL SCHEDULE PANEL ATS-01 VOLTS 240/120 PHASE 1 WIRE 3 CAT. NO. LOCAL ATTENDANT BUILDING MOUNTING FLUSH SURFACE FEED TOP BOTTOM 200 MAINS AMPERE RATING LUGS ONLY 100 AMP BKR. FEEDER CONDUIT 1 - 1" CIRCUIT NO. WIRE 2- #6 / 1- #6 G CKT NO. AMPS POLE DESCRIPTION WATTS LOAD L1 WATTS DESCRIPTION CKT NO. POLE AMPS SITE LIGHTING01 03 05 07 09 11 13 02 04 06 08 10 12 14 TOTAL AMPERES - - - TOTAL WATTS - AVERAGE AMPS - X X ----- ATTENDANT BUILDING SUB-PANEL ----- -K -K -K -K -K -K -K -K -K -K -K -K -K -K - - 1 20 CONTROL BUILDING LIGHTING ----- ----- CONTROL BUILDING UPS RECEPTACLE ----- L2 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 240/120V ATS PANEL CONTROL BUILDING PANEL SCHEDULE PANEL PB-01 AIC 10K VOLTS 208Y/120 PHASE 3 WIRE 4 CAT. NO. CONTROL BUILDING MOUNTING FLUSH SURFACE FEED TOP BOTTOM 200 MAINS AMPERE RATING LUGS ONLY 175 AMP BKR. CKT NO. AMPS POLE DESCRIPTION LOAD VA LOAD A B C WATTS DESCRIPTION CKT NO. POLE AMPS ATTENDANT BUILDING HEAT PUMP 01 03 05 07 09 11 13 15 17 02 04 06 08 10 12 14 16 18 TOTALS: AMPS PER PHASE - - - TOTAL WATTS - AVERAGE AMPS - X X SUMP PUMP #1 P93130 ATS ATS -K - - - - -K -K -K -K -K -K -K -K -K -K -K -K -K -K -K -K -K - - - - - - 80 - 2 80 SUMP PUMP #2 P93131 80 2 1 15 20 2 - 80 20 - 2 70 20 1 - 70 40 2 2 20 40 - - 20 15 2 60 15 - 60 120v ATS SUB PANEL ATTENDANT BUILDING AIR COMPRESSOR AUTO DRAIN CONTROL BUILDING HEAT PUMP SUMP PUMP #1 P93130 SUMP PUMP #2 P93131 1 15 1 15 1 20 60 2 60 - 15 1 PANEL SCHEDULE PANEL ATS-02 VOLTS 240/120 PHASE 1 WIRE 3 CAT. NO. LOCAL ATTENDANT BUILDING MOUNTING FLUSH SURFACE FEED TOP BOTTOM 200 MAINS AMPERE RATING LUGS ONLY 60 AMP BKR. FEEDER CONDUIT 1 - 1" CIRCUIT NO. WIRE 2- #6 / 1- #6 G CKT NO. AMPS POLE DESCRIPTION WATTS LOAD L1 WATTS DESCRIPTION CKT NO. POLE AMPS 01 03 05 07 09 11 13 02 04 06 08 10 12 14 TOTAL AMPERES - - - TOTAL WATTS - AVERAGE AMPS - X X ----- ---- ----- ----- -K -K -K -K -K -K -K -K -K -K -K -K -K -K - - 1 20IT CABINET SUPPLY ATTENDANT BUILDING LIGHTING ----- ----- UPS - OUTLET ----- L2 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 1 1 15 20 - - - - ATTENDANT BUIL;DING HEAT PUMP - - - - - - - - CONTROL BUILDING HEAT PUMP SPARE SPARE ATTENDANT BUILDING SUB-PANEL PB4 OUTLETS HVAC AIR HANDLER ATTENDANT BUILDING SUB-PANEL PB4 OUTLETS ATTENDANT BUILDING SUB-PANEL - - - - - -- - - - - - ----- ----- ----- ----- 120v SUB PANEL ATTENDANT BUILDING PANEL SCHEDULE PANEL PB-02 VOLTS 120 PHASE 1 WIRE 3 CAT. NO. LOCAL ATTENDANT BUILDING MOUNTING FLUSH SURFACE FEED TOP BOTTOM 200 MAINS AMPERE RATING LUGS ONLY 60 AMP BKR. FEEDER CONDUIT 1 - 1" CIRCUIT NO. WIRE 2- #6 / 1- #6 G CKT NO. AMPS POLE DESCRIPTION WATTS LOAD L1 WATTS DESCRIPTION CKT NO. POLE AMPS 01 03 05 07 09 11 13 02 04 06 08 10 12 14 TOTAL AMPERES - - - TOTAL WATTS - AVERAGE AMPS - X X ---- ----- ----- -K -K -K -K -K -K -K -K -K -K -K -K -K -K 1 20 OUTLETS ----- ----- ----- L2 ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- 1 15 1 15 1 20- - - - 15 1 1 1 20 1 - - - - - - - - - - - - - - ----- ----- OUTLETS OUTLETS HVAC AIR HANDLER20 1 ----- ----- - - - - - - - - - - - - ----- ----- 45 kVA TRANSFORMER WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E2-03_Panel_Schedule.dwg PANEL SCHEDULES E2-03.01 NTS CODE DESCRIPTION LIGHTING LOADS L RECEPTACLES R MOTOR LOAD M DEDICATED RECEPTACLES S HVAC H MISC Z 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 7. EQP CONTROLLER 'DELTRONICS' L N GND T1-65 T1-66 FIRE ALARM T1-71 T1-72 HI-HI-FAS 42 C+ 41 C+ 5880 INPUT MODULE A B S+ S- FIRE ALARM CONTROL PANEL (FACP) 'SILENT KNiGHT' SBUS + - TELCO 2 TELCO 1 CONTROL PANEL LP01 120/208V RING TIP S+ S- +24V GND IP COMMUNICATOR EMERGENCY PHONE THIS PANEL IS EQUIPPED WITH AUTODIALER(S) WIRELESS MODEM NETWORK PANEL DS1 LINE TO UL CENTRAL STATION AND LOCAL FIRE DEPARTMENT NOTES: 1. THE SAFETY PLC PANEL MONITORS THE FLAME SENSORS (FIRE EYES). IT SENDS AN ALARM SIGNAL TO THE FIRE ALARM CONTROL PANEL (FACP) AND THE PUMP OPERATOR PANEL (POP) IN THE EVENT A FIRE IS DETECTED. THE FACP, IN TURN, MONITORS THIS SIGNAL FROM THE SAFETY PLC AS WELL AS SIGNALS FROM THE SMOKE DETECTORS AND FIRE ALARMS. 2. THE FACP ACTIVATES A LOCAL STROBE LIGHT & HORN AND TRANSMITS A SIGNAL TO THE NETWORK PANEL AND ON TO A UL CENTRAL STATION AND THE LOCAL FIRE DEPARTMENT IF A FIRE IS DETECTED BY ANY OF THE SOURCES IDENTIFIED IN NOTE 1. THIS SIGNAL FROM THE NETWORK PANEL IS REDUNDANT AND IS SENT VIA A T1 LINE (PRIMARY) OR WIRELESS MODEM (SECONDARY) USING AN AUTODIALER. 3. THE SAFETY PLC PANEL ALSO MONITORS THE GAS DETECTORS. IT ACTIVATES A LOCAL STROBE LIGHT & HORN (@ 20% LEL OR HIGHER) AND SENDS A SIGNAL TO THE PUMP OPERATOR PANEL (POP) (@ 40% LEL OR HIGHER) IN THE EVENT OF A GAS LEAK THAT CAUSES THE INDICATED GAS CONCENTRATIONS. 4. THE PUMP OPERATOR PANEL (POP) MONITORS THE INDICATED SIGNALS FROM THE SAFETY PLC PANEL AS WELL AS THE EMERGENCY STOP PUSHBUTTONS (ES) AND SHUTS STRATEGICALLY SELECTED SYSTEMS WHEN ANY ONE OF THE LISTED ITEMS IS ACTIVATED. 5. SEE DRAWING 12225-E-600, SH 1 FOR LOCATIONS OF THE FIRE EYES, GAS DETECTORS AND EMERGENCY STOP PUSHBUTTONS. 6. AN EMERGENCY PHONE IS LOCATED ON SITE AT THE CONTROL BUILDING. IT IS CONNECTED TO THE UL CENTRAL STATION VIA THE NETWORK PANEL AND A PHONE LINE USING AN AUTODIALER. COM 09 14 15 23 24 TO AP CAT 6 16/4 FPLP CAT 6 CAT 6 CAT 6 CAT 6 CAT 6 16/2 FPLP CAT 6 HS 90001 HS 90001 HS 90001 HS 90001 HS 90001 HS 90001 E-STOP E-STOP E-STOP E-STOP E-STOP E-STOP GS AT-90052 B GENERAL STATION ALARM LIGHT 7' OVDC + - 104 24V DC 7 XA 1.1 MODULE BELDEN 9316 T1-57 T1-58 + - W HIGH GAS STROBE LIGHT & HORN FIRE ALARM STROBE LIGHT & HORN (PR2K) R GS AT-90051 FE AT-90002 GS AT-90053 GS AT-90054 FE AT-90003 AT-90055 FE AT-90001AT-90004 FE GS AT-90058 GS AT-90057 AT-90056 GS GS IDP- PULL STATION IDP- PHOTO SMOKE 1 IDP- PHOTO SMOKE 2 SMOKE DETECTORS & FIRE ALARM PULL HANDLE SLC OUT + - BACKUP BATTERY WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E2-10_FIREPANEL.dwg FIRE / SECURITY PANEL BLOCK DIAGRAM E2-10.01 NTS BELDEN 3073F COMM BELDEN 9367 POWER 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 8. ETHERNET WAN [CAT6+] ETHERNET LAN [CAT6+] CONTROLNET NETWORK INTRINSICALLY SAFE CONTROLNET NETWORK FIBER NETWORK MODBUS [RS485] MODBUS [TCPIP] NOTES & LEGEND GENERAL NOTES LEGEND DETAILS 1. XXX WORKSTATION WITH DUAL 21.50" FLAT SCREEN LCD, CORE I5, RAID1, WINDOWS 7 PROFESSIONAL. CONTROL SYSTEM SOFTWARE PROVIDED: 1. FACTORY TALK VIEW SE STATION SOFTWARE WILL BE USED AS THE CONTROL INTERFACE. RUNTIME LICENSE PROVIDED (NO DEVELOPMENT) 2. AB RSLOGIX5000 V.20, AND ASSOCIATED SOFTWARE, WILL BE USED FOR PROGRAMMING THE PLC. 2. XXX WORKSTATION WITH DUAL 21.5" FLAT SCREEN LCD, CORE I5, RAID1, WINDOWS 7 PROFESSIONAL. SYSTEM SOFTWARE PROVIDED: 1. XXX HMI SOFTWARE WILL BE USED AS THE CONTROL INTERFACE. 3. SCADA2 IS REQUIRED TO BE ACCESSIBLE FROM THE INTERNET [MANDATORY]. 4. THE CONTROL BUILDING WILL HOUSE THE MAIN CONTROL PANEL, TO INCLUDE: AN ALLEN-BRADLEY COMPACTLOGIX PLC SYSTEM WITH COMMUNICATION AND NETWORK MODULES ADDITIONALLY, THE BUILDING WILL HOUSE: IT CABINET, FIRE PROTECTION PANEL, VARIABLE FREQUENCY DRIVES AND A LOCAL UPS POWER SOURCE. 5. CONTROLNET NETWORK (NON-REDUNDANT) IS DIVIDED INTO TWO NETWORKS, NON-INTRINSICALLY SAFE AND INTRINSICALLY SAFE. 6. REMOTE IO PANELS WILL HOUSE FLEX EX/IO (INTRINSICALLY SAFE) REMOTE, CONNECTED TO THE MAIN CHASSIS VIA THE INTRINSICALLY SAFE CONTROLNET NETWORK. 7. THE OFFICE BUILDING WILL HOUSE THE LOCAL SCADA SYSTEM AS WELL AS THE INTERFACE FOR TRUCK LOADING. 1. REFERENCE HARDWARE & SOFTWARE SPECIFICATION DOCUMENT FOR FURTHER DETAILS. FIBER BRIDGE PLC FIBER NETWORK DIAGRAM Unload VFD #1 Unload VFD #2 Truck Scale #1 EQP DELTRONICS SAFETY PANEL CONTROLNET ADAPTER 1734-ACNR Truck Scale #2 RIO #1 RIO #2 75 OHM LOAD 75 OHM LOAD IS BARRIER 1797-BCNR CONTROL NET ETHERNET WAN 1797 -ACNR15 1797 -ACNR15 NODE 6 COMPACT LOGIX 1768-ENBT DE-MARK (T-1) DS1 1.54 Mbps SCADA1 SCADA2 FIRE PROTECTION PANEL IT SWITCH 192.168.0.0 SECURITY PANEL UPS CONTROL BLDG 192.168.0.0 WIRELESS MODEM ETHERNET LAN IS CONTROL NET 192.168.0.0192.168.0.0192.168.0.0192.168.0.0192.168.0.0 NETWORK PRINTER AUTO- DIALER 192.168.0.0192.168.0.0 NODE 0 NODE 5 NODE 4 NODE 3 NODE 2 NODE 1 NODE 8 NODE 9 NODE 7 TOP TECH TMS6 192.168.0.0 UPS ATTENDANT BLDG 192.168.0.0 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E3-00_SystemControlTopology.dwg SYSTEM CONTROL TOPOLOGY E3-00.01 NTS 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 9. 2 1 78 6543 USA IN MADE 6.50 FRONT VIEW SCALE= 1:4 CONTROL PANEL EQUIPMENT LAYOUT BOM E4-00.01 NTS A INTERIOR PANEL LAYOUT SCALE= 1:4 B 8 9 10 11 13 14 12 17 18 7 21 24 47 52 23 9 26 25 22 28 50 43 42 27 41 49 51 33 29 1 1. 1 PANEL 36 X 36 X 8 SCE-36EL3608LP SAGINAW 2. 1 SUB PANEL SCE-36P36 SAGINAW 3. 1 EL, MOUNTING FEET KIT (Not Shown) SCE-ELMFK4 SAGINAW 4. A/R DIN RAIL 35mm x 15mm 5. A/R WIRE WAY 1-1/2 x 3 T1-1530G AUTOMATION DIRECT 6. 1 GROUND BAR, 6 PORT UBG2/0-414-6 PANDUIT 7. 1 MAIN GROUND LUG CLMAR2/0-14Q PANDUIT 8. 1 ENET SWITCH 5 PORT SE-SW 5U AUTOMATION DIRECT 9. 2 CONTROLNET, Y TAP 1786-TPSYR ALLEN BRADLEY 10. 1 COMPACT LOGIX, PWR SUPPLY 1768-PA3 ALLEN BRADLEY 11. 1 COMPACT LOGIX, L4X BRIDGE 1768-ENBT ALLEN BRADLEY 12. 1 CONTROLNET BRIDGE MODULE 1768-CNB ALLEN BRADLEY 13. 1 COMPACT LOGIX, L43 PROCESSOR 1768-L43 ALLEN BRADLEY 14. 1 R-END CAP 1769-ECR ALLEN BRADLEY 15. 1 PHASE MONITOR, SPDT 208/480 PMRU-1C-480A AUTOMATION DIRECT 16. 1 RELAY SOCKET 70169-D AUTOMATION DIRECT 17. 1 CB, 3P. 0.5A, C CURVE WMZT3CX0 AUTOMATION DIRECT 18. 1 MCCB, 3P, 225A, F-FRAME F3P-225 AUTOMATION DIRECT 19. 1 MCCB, MULTI-WIRE LUG F-FRAME 3TA150F6K AUTOMATION DIRECT 20. 1 MCCB, ROTARY HNDL, F-FRAME FHMVD12B AUTOMATION DIRECT 21. 1 MINI PS-100, 240VAC/24VDC/C2LPS 2866336 PHOENIX CONTACT 22. 6 TERMINAL BASE, 2 PC. 8-PT. 1734-TBS ALLEN BRADLEY 23. 1 24VDC, 8-PT., SINK INPUT MODULE 1734-IB8 ALLEN BRADLEY 24. 1 COMMON TERMINAL MODULE 1734-CTM ALLEN BRADLEY 25. 1 4 CH, ANALOG INPUT MODULE, HART 1734-SC-IE 4CH ALLEN BRADLEY 26. 1 CONTROLNET ADAPTER 1734-ACNR ALLEN BRADLEY 27. 3 CARD RELAY, 5A, SPST, 4RLY, 24VDC RS4N-DE AUTOMATION DIRECT 28. 1 REDUNDANT CNTRLNET BAR. MOD. 1797-BCNR ALLEN BRADLEY 29. 2 MMS 63A 55mm ROTARY BM3VHB-063 AUTOMATION DIRECT 30. 2 MMS BASE PLATE BM3V up to E2 BZ0BPVE51A AUTOMATION DIRECT 31. 2 CONTACTOR 50A 54mm 110/120V COIL SC-E2S-110VAC AUTOMATION DIRECT 32. 2 LINK MODULE BM3V AC SC-E2S BV0LVE51AA AUTOMATION DIRECT 33. 2 MMS 20A 45mm ROTOR BM3RHB-020 AUTOMATION DIRECT 34. 2 MMS BASE PLATE BM3RH NP to E05 BZ0BPRE22A AUTOMATION DIRECT 35. 2 LINK MODULE BM3RH E02 to E05 BZ0LRE22AA AUTOMATION DIRECT 36. 2 CONTACTOR 12A 110/120V COIL SC-E03-110VAC AUTOMATION DIRECT 37. 4 AUX CONTACT 2NO E02 to E04 FRONT SZ-A20T AUTOMATION DIRECT 38. 4 MMS AUX CONTACT 1NO FRONT BZ0WIA AUTOMATION DIRECT 39. 1 MMS BUSBAR TERMINAL BM3RH BZ0BFRA AUTOMATION DIRECT 40. 1 MMS BUSBAR BM3RH 2-BM3RH BZ0BR02A AUTOMATION DIRECT 41. 8 SUPP PROTECTOR 6A 1 POLE 250V RESET DN-SUPP-6-1 AUTOMATION DIRECT 42. 1 SUPP PROTECTOR 10A 1 POLE 250V RESET DN-SUPP-10-1 AUTOMATION DIRECT 43. 1 SUPP PROTECTOR 3A 1 POLE 250V RESET DN-SUPP-3-1 AUTOMATION DIRECT 44. 7 SUPP PROTECTOR 1A 1 POLE 250V RESET DN-SUPP-1-1 AUTOMATION DIRECT 45. 4 TERM BULK SOCKET 5/PK 25A 300V euro F4 DN-FE4-5 AUTOMATION DIRECT 46. 1 CONTROLNET BNC TERMINATOR 1786-XT ALLEN BRADLEY 47. 2 24VDC 8-POINTSOURCE OUTPUT MODULE 1734-OB8 ALLEN BRADLEY 48. 1 E-NET PATCH CABLE Cat5E STP 3FT GRAY C5E-STPGY-S3 AUTOMATION DIRECT 49. 14 TERMINAL BLOCK 20A 12AWG 600V DN-T12 AUTOMATION DIRECT 50. 9 END BRACKET 6mm 35mm DIN RAIL DN-QEB35 AUTOMATION DIRECT 51. 5 TERMINAL BLOCK 24 - 10 AWG DIN DN-G10 AUTOMATION DIRECT 52. 1 VOLTAGE TERMINAL MODULE 1734-VTM ALLEN BRADLEY 53. A/R WIRE DUCT 1-1/2 x 3 T1-2230G AUTOMATION DIRECT ITEM NO QTY NAME PART NO MFG 4 2 53 6 16 15 1920 34 35 36 37 38 30 31 32 37 38 45 45 39 40 41 45 4445 47 5 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-00_ControlPanel.dwg 45 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 10. 10.00 8.00 7.75 5.00 2.62 8.62 10.25 4.92 (125 mm) 6.28 6.50 2.00 6.86 REF 10.29 1.50 2.00 9.62 6.38 10.13 PANEL - DIN RAIL AND WIRE DUCT LAYOUT SCALE=1:2 CONTROL PANEL DIN RAIL / WIRE DUCT INSTALLATION E4-00.02 1:2 A COMMUNICATION&CLASS2WIRING CLASS1WIRING ACWIRING AC WIRING WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-00_ControlPanel.dwg 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 11. LNG Pump 93101 Enable REF DWG - P2-93.01 LNG Pump 93102 Enable REF DWG - P2-93.01 Air Comp. 95101 Enable REF DWG - P2-95.01 Air Comp. 95102 Enable REF DWG - P2-95.01 X1 From ATS / Ref Dwg E2-00.01-A Spare 120 VAC, Non UPS Power X2 Sump Pump 93101 Run REF DWG - P2-93.01 Sump Pump 93102 Run REF DWG - P2-93.01 Air Dryer SP 901 Supply Power REF DWG - P2-95.01 Note 1 Air Dryer SP 902 Supply Power REF DWG - P2-95.02 ~ L + - PS1 120Vac 24Vdc 91.2 Watts +24 Com 1768-PA3 Power Supply REF DWG E4-00.00 UPS-H From UPS / Ref Dwg - E2-00.01A RIO Panel 1 Supply Power REF DWG - E4-01.00 Spare RIO Panel 2 Supply Power REF DWG - E4-02.00 RIO Panel 2 Supply Power REF DWG - E4-03.00 UPS-N 1734-ACNR Power Supply +24V From PS1 / Ref Dwg - E4-00.02B REF DWG - P2-90.02 Industrial Ethernet Switch REF DWG - P2-90.02 REF DWG - P2-94.01 REF DWG - P2-90.02 REF DWG - P2-94.02N REF DWG E4-00.02C 1734-ACNR Power Supply REF DWG - E4-00.00 +24V From PS1 / Ref Dwg - E4-00.02B FIT 90217 REF DWG - P2-90.02 Industrial Ethernet Switch REF DWG - E4-00.00 Com FIT 90218 REF DWG - P2-90.02 FIT 94101 REF DWG - P2-94.01 FIT 90256 REF DWG - P2-90.02 Spare FIT 94201 REF DWG - P2-94.02 120 VAC - NON-UPS POWER 120 VAC - UPS POWER 24 VDC POWER CONTROL PANEL POWER DISTRIBUTION DIAGRAMS E4-00.03 NTS A B C WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-00_ControlPanel.dwg 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 12. 0 IN 0 2 IN 2 4 COM 6 FGN 1 IN 1 3 IN 3 5 +24 7 FGN 1734sc-IE4CH Slot 1 1734-VTM Slot 1A PIT95160 + - PIT 95160 Instrument Air Pressure REF DWG - P2-95.01 Blk Wht Wht Blk Note 1 0 V 2 V 4 V 6 V 1 V 3 V 5 V 7 V 0 IN 0 2 IN 2 4 IN 4 6 IN 6 1 IN 1 3 IN 3 5 IN 5 7 IN 7 1734-IB8 Slot 2 0 V 2 V 4 V 6 V 1 V 3 V 5 V 7 V 1734-VTM Slot 1A Air Dryer Alarm REF DWG - P2-95.01 Air Dryer Alarm REF DWG - P2-95.01 Comp. 1 Selected REF DWG - P2-95.01 Comp. 2 Selected REF DWG - P2-95.01 Note 1 Phase Monitoring Relay REF DWG - E4-00.00 Load Out Pump 1 Selected REF DWG - P2-93.01 Load Out Pump 2 Selected REF DWG - P2-93.01 1734-OB8 Slot 4 0 Out 0 2 Out 2 4 Out 4 6 Out 6 1 Out 1 3 Out 3 5 Out 5 7 Out 7 Blue Strobe/General Alarm 0 C 2 C 4 C 6 C 1 C 3 C 5 C 7 C 1734-CTM Slot 3A Note 1 Methane Hi Hi Alarm FACP Alarm To/From Fire Alarm Control Panel ref dwg ref sht White Strobe & Horn/ Hi Methane Alarm 1734-OB8 Slot 3 0 Out 0 2 Out 2 4 Out 4 6 Out 6 1 Out 1 3 Out 3 5 Out 5 7 Out 7 Com / REF DWG - E4-00.00 LNG Pump 93101 Enable REF DWG - P2-93.01 LNG Pump 93102 Enable REF DWG - P2-93.01 Air Comp. 95101 Enable REF DWG - P2-95.01 Air Comp. 95102 Enable REF DWG - P2-93.01 Sump Pump 93130 Run REF DWG - P2-93.01 Sump Pump 93131 Run REF DWG - P2-93.01 Air Dryer SP 901 Run REF DWG - P2-95.01 Air Dryer SP 902 Run REF DWG - P2-95.01 ANALOG INPUT MODULE SLOT 1 ANALOG INPUT MODULE SLOT 2 DIGITAL OUTPUT MODULE SLOT 3 DIGITAL OUTPUT MODULE SLOT 4 CONTROL PANEL ANALOG INPUT MODULE SLOT 1 THRU 4 E4-00.04 NTS A B DC WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-00_ControlPanel.dwg 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 13. SLOT 5 AB 1797-OE8H KEY SWITCH 4 REMOTE I/O PANEL #1 PANEL LAYOUT POWER DISTRIBUTION E4-01.01 1:4 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-01_RIO-1.dwg REMOTE I/O PANEL #1 LAYOUT SCALE = 1:4 A 1. 1 PANEL 24 X 24 X 8 SCE-24EL2408SSLP SAGINAW 2. 1 SUB PANEL SCE-24P24 SAGINAW 3. 1 EL, MOUNTING FEET KIT, SS SCE-ELMFK4SS SAGINAW 4. A/R DIN RAIL 35mm x 15mm 5. A/R WIRE WAY 1-1/2 x 4 6. 1 CONTROLNET EX RIGHT Y-TAP 1797-TPYR ALLEN BRADLEY 7. 1 REDUNDANT MEDIA ADAPTER EX CNTRLNET 1797-ACNR15 ALLEN BRADLEY 8. 3 FLEX EX ANALOG INPUT MOD, 8 PT HART 1797-IE8H ALLEN BRADLEY 9. 2 FLEX EX ANALOG OUTPUT MOD, 8 PT HART 1797-OE8H ALLEN BRADLEY 10. 2 FLEX EX DIGITAL INPUT MOD, 8 PT HART 1797-IBN16 ALLEN BRADLEY 11. 1 FLEX EX 24VDC SOURCE OUPUT MOD.4 PT 1797-OB4D ALLEN BRADLEY 12. 8 3 WIRE EX TERMINAL BASE - SCREW CLAMP 1797-TB3 ALLEN BRADLEY 13. 1 EXTENDER CABLE FOR TERMINAL BASES 1797-CE1 ALLEN BRADLEY 14. 1 CONTROLNET EX TRUNK TERMINATOR 1797-XT ALLEN BRADLEY 15. 20 TERMINAL BLOCK 24-10 AWG DIN DN-G10 ALLEN BRADLEY 16. 2 END BRACKET 6 mm / 35 mm DIN RAIL 1492-EBJ3 ALLEN BRADLEY 17. 2 END BARRIER 1492-EAJ35 ALLEN BRADLEY 18. 1 PLUG IN CENTER JUMPER, 20 POLE 1492-CJLJ5-20 ALLEN BRADLEY ITEM NO QTY NAME PART NO MFG NOTE: 1. ROUTE POWER SUPPLY CONDUCTORS THROUGH FERRITE CORE. ONE FERRITE CORE PER POWER SUPPLY. 1 FERRITE CORE 12 15 4 2 8 12 13 3 7 5 6 3 PL 16 17 18 9 12 9 12 10 12 10 12 11 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 14. 1 2 3 4 5 Vin Vout Gnd 10 11 12 13 14 15 16 17 +V -V +V -V +V -V +V -V Out 1 Out 2 Out 3 Out 4 Input Power Intrinsically Safe Outputs Power Supply 1 To Slot 3 REF DWG E4-01.02 1 2 3 4 5 Vin Vout Gnd 10 11 12 13 14 15 16 17 +V -V +V -V +V -V +V -V Out 1 Out 2 Out 3 Out 4 Input Power Intrinsically Safe Outputs Power Supply 2 Note 1 Note 1 120Vac Power REF SHT E4-00.02 ControlNet Communication Adapter 1797-ANCR15 Incoming ControlNet Trunk Cable (Belden 3092A) FROM CONTROL PANEL REF DWG E4-02.00 1797-TPYR ControlNet Y Tap To Slot 2 REF DWG E4-01.02 To Slot 1 REF DWG E4-01.02 To Slot 4 REF DWG E4-01.02 To Slot 5 REF DWG E4-01.03 To Slot 6 & 7 REF DWG E4-01.03 To Slot 8 REF DWG E4-01.03 Outgoing ControlNet Trunk Cable (Belden 3092A) TO RIO #2 REF DWG E4-02.00 POWER DISTRIBUTION SCHEMATIC SCALE = NTS B REMOTE I/O PANEL #1 PANEL LAYOUT POWER DISTRIBUTION E4-01.02 1:2 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-01_RIO-1.dwg NOTE: 1. ROUTE POWER SUPPLY CONDUCTORS THROUGH FERRITE CORE. 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 15. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - LIT-92130 1 2 FIT-90256 REF DWG E4-20.02 1 2 FIT-90217 REF DWG E4-20.02 1 2 Ch0 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-IE8H Slot 1 Keyswitch 8 PS1-2+ PS1-2- REF DWG E4-01.01B + - LIT-92140 + - LIT-92430 + - LIT-92230 + -LIT-92330 Note 1 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 FIT-90218 REF DWG E4-20.02 AB 1797-IE8H Slot 2 Keyswitch 8 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - PIT-90215 + - LIT-92440 + -LIT-92240 + - Ch0 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C PS1-3+ PS1-3- REF DWG E4-01.01B + - PIT-92233 + - PIT-92133 + -PIT-90218 + -PIT-90256 Note 1 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 LIT-92340 AB 1797-IE8H Slot 3 Keyswitch 8 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - TT-93130 + - TT-90230 + - PIT-92333 + - Ch0 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C PS1-4+ PS1-4- REF DWG E4-01.01B + - TIT-92401 + - TIT-92301 + - TIT-92101 + - TIT-92201 Note 1 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 PIT-92433 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - HCV-92109 + - PCV-90256 + - HCV-90221 + - HCV-90222 Ch0 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-OE8H Slot 4 Keyswitch 4 ~~ PS2-1+ PS2-1- REF DWG E4-01.01B + - HCV-92239 + - HCV-92209 + - HCV-92139 + - PCV-92133 Note 1 ANALOG INPUT MODULE SCALE = NTS ANALOG INPUT MODULE SCALE = NTS ANALOG INPUT MODULE SCALE = NTS ANALOG OUTPUT MODULE SCALE = NTS A C D B WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-01_RIO-1.dwg REMOTE I/O PANEL #1 ANOLOG INPUT MODULE SLOT 1 THRU 4 E4-01.03 NTS WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-01_RIO-1.dwg NOTE: 1. TERMINATE SHIELDS AT GROUNDING TERMINALS PROVIDED IN ENCLOSURE 2. TERMINATE WIRES RED to POSITIVE BLACK to NEGATIVE 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 16. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - PCV-92333 + - HCV-92339 + - PCV-92233 + - HCV-92309 Ch0 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-OE8H Slot 5 Keyswitch 4 ~~ PS2-2+ PS2-2- REF DWG E4-01.01B + - PCV-92433 + -HCV-92409 + - HCV-92439 Note 1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 XCV-92152 OPEN POS. Ch0 Ch2 Ch6 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-IBN16 Slot 6 Keyswitch 6 PS2-3+ PS2-3- REF DWG E4-01.01B Ch1 Ch3 Ch5Ch4 Ch7 Ch8 Ch10 Ch14Ch9 Ch11 Ch13Ch12 Ch15 XCV-92152 CLOSED POS. XCV-92158 OPEN POS. XCV-92158 CLOSED POS. XCV-92258 CLOSED POS. XCV-92258 OPEN POS. XCV-92252 CLOSED POS. XCV-92252 OPEN POS. XCV-92352 OPEN POS. Note 1 XCV-92352 CLOSED POS. XCV-92358 OPEN POS. XCV-92358 CLOSED POS. XCV-92458 CLOSED POS. XCV-92458 OPEN POS. XCV-92452 CLOSED POS. XCV-92452 OPEN POS. 1 2 3 4 OFF Fault Detect Switch PS2-3+ PS2-3- Note 1 REF DWG E4-01.03C 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 LS-90231 / LO LEVEL Ch0 Ch2 Ch6 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-IBN16 Slot 7 Keyswitch 6 PS2-3+ PS2-3- Note 1 Ch1 Ch3 Ch5Ch4 Ch7 Ch8 Ch10 Ch14Ch9 Ch11 Ch13Ch12 Ch15 LS-90231 / HI LEVEL LS-90231 / HI HI LEVEL XCV-90263 / OPEN POS. LS-93131 / HI HI LEVEL LS-93131 / HI LEVEL LS-93131 / LO LEVEL XCV-90263 / CLOSED POS. Note 1 XCV-94109 / CLOSED POS. XCV-94109 / OPEN POS. 1 2 3 4 OFF Fault Detect Switch REF DWG E4-01.03B XCV-94209 / CLOSED POS. XCV-94209 / OPEN POS. XCV-90241 / OPEN POS. XV-90241 / CLOSED POS. XCV-90217 / OPEN POS. XCV-90217 / CLOSED POS. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 XV-92152 Ch0 Ch1 Ch2 Ch3 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-OB4D Slot 8 Keyswitch 7 ~~ PS2-4+ PS2-4- REF DWG E4-01.01B XV-92158 XV-92258 XV-92252 ANALOG OUTPUT MODULE SCALE = NTS A DIGITAL INPUT MODULE SCALE = NTS B DIGITAL OUTPUT MODULE SCALE = NTS C DIGITAL OUTPUT MODULE SCALE = NTS D WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-01_RIO-1.dwg REMOTE I/O PANEL #1 ANALOG INPUT MODULE SLOT 5 THRU 8 E4-01.04 NTS WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-01_RIO-1.dwg NOTE: 1. TERMINATE SHIELDS AT GROUNDING TERMINALS PROVIDED IN ENCLOSURE 2. TERMINATE WIRES RED to POSITIVE BLACK to NEGATIVE 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 17. REMOTE I/O PANEL #2 PANEL ASSY PANEL LAYOUT E4-02.01 1:2 REMOTE I/O PANEL #2 LAYOUT SCALE = 1:4 A 1. 1 PANEL 24 X 24 X 8 SCE-24EL2408SSLP SAGINAW 2. 1 SUB PANEL SCE-24P24 SAGINAW 3. 1 EL, MOUNTING FEET KIT, SS SCE-ELMFK4SS SAGINAW 4. A/R DIN RAIL 35mm x 15mm 5. A/R WIRE WAY 1-1/2 x 4 6. 1 CONTROLNET EX RIGHT Y-TAP 1797-TPYR ALLEN BRADLEY 7. 1 REDUNDANT MEDIA ADAPTER EX CNTRLNET 1797-ACNR15 ALLEN BRADLEY 8. 4 FLEX EX ANALOG INPUT MOD, 8 PT HART 1797-IE8H ALLEN BRADLEY 9. 1 FLEX EX ANALOG OUTPUT MOD, 8 PT HART 1797-OE8H ALLEN BRADLEY 10. 0 FLEX EX DIGITAL INPUT MOD, 8 PT HART 1797-IBN16 ALLEN BRADLEY 11. 3 FLEX EX 24VDC SOURCE OUPUT MOD.4 PT 1797-OB4D ALLEN BRADLEY 12. 8 3 WIRE EX TERMINAL BASE - SCREW CLAMP 1797-TB3 ALLEN BRADLEY 13. 1 EXTENDER CABLE FOR TERMINAL BASES 1797-CE1 ALLEN BRADLEY 14. 1 CONTROLNET EX TRUNK TERMINATOR 1797-XT ALLEN BRADLEY 15. 20 TERMINAL BLOCK 24-10 AWG DIN DN-G10 ALLEN BRADLEY 16. 2 END BRACKET 6 mm / 35 mm DIN RAIL 1492-EBJ3 ALLEN BRADLEY 17. 2 END BARRIER 1492-EAJ35 ALLEN BRADLEY 18. 1 PLUG IN CENTER JUMPER, 20 POLE 1492-CJLJ5-20 ALLEN BRADLEY ITEM NO QTY NAME PART NO MFG WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-02_RIO-2.dwg NOTE: 1. ROUTE POWER SUPPLY CONDUCTORS THROUGH FERRITE CORE. 1 FERRITE CORE 12 4 2 8 12 13 2 PL 3 7 5 6 15 16 17 18 14 9 12 9 12 11 12 11 12 11 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 18. 1 2 3 4 5 Vin Vout Gnd 10 11 12 13 14 15 16 17 +V -V +V -V +V -V +V -V Out 1 Out 2 Out 3 Out 4 Input Power Intrinsically Safe Outputs Power Supply 3 To Slot 3 REF DWG - E4-02.02 1 2 3 4 5 Vin Vout Gnd 10 11 12 13 14 15 16 17 +V -V +V -V +V -V +V -V Out 1 Out 2 Out 3 Out 4 Input Power Intrinsically Safe Outputs Power Supply 4 Note 1 Note 1 120Vac Power REF DWG - E4-00.02B ControlNet Communication Adapter 1797-ANCR15 Incoming ControlNet Trunk Cable From RIO #1 REF DWG - E4-00.01 1797-TPYR ControlNet Y Tap To Slot 2 REF DWG - E4-02.02 To Slot 1 REF DWG - E4-02.02 To Slot 5 REF DWG - E4-02.03 To Slot 4 REF DWG - E4-02.02 To Slot 7 REF DWG - E4-02.03 To Slot 6 REF DWG - E4-02.03 1797-XT 75 ohm ControlNet Trunk terminator. 1 2 3 4 5 Vin Vout Gnd 10 11 12 13 14 15 16 17 +V -V +V -V +V -V +V -V Out 1 Out 2 Out 3 Out 4 Input Power Intrinsically Safe Outputs Power Supply 5 To Slot 8 REF DWG - E4-02.03 Note 1 120Vac Power REF DWG - E4-00.02B POWER DISTRIBUTION SCHEMATIC SCALE = NTS REMOTE I/O PANEL #2 COMPONENT LAYOUT POWER DISTRIBUTION SCHEMATIC E4-02.02 1:4 A WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-02_RIO-2.dwg NOTE: 1. ROUTE POWER SUPPLY CONDUCTORS THROUGH FERRITE CORE. 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 19. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - AS-94263 + -AS-94163 Ch0 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-IE8H Slot 1 Keyswitch 8 PS3-2+ PS3-2- + - PDIT-93127B REF DWG - E4-20.01A + - PDIT-93127A REF DWG - E4-20.01A 1 2 FIT-94101 REF DWG - E4-20.02 1 2 FIT-94201 REF DWG - E4-20.02 Note 1 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 REF DWG E4-02.01 AB 1797-IE8H Slot 2 Keyswitch 8 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - PIT-94158 + -PIT-92924 + - Ch0 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C PS3-3+ PS3-3- + - TIT-93121A + - TIT-93105 + - PIT-94258 Note 1 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 PIT-93151 REF DWG E4-02.01 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - HCV-94139 + - PCV-92924 Ch0 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-OE8H Slot 4 Keyswitch 4 ~~ PS4-1+ PS4-1- + - HCV-92211 + - HCV-94239 + - PCV-94158 + - HCV-92113 Note 1 REF DWG E4-02.01 + - PCV-93151 + - HCV-92111 AB 1797-IE8H Slot 3 Keyswitch 8 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - TIT-93135B + - TIT-93135A + -TIT-93121B + - Ch0 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C PS3-4+ PS3-4- + - TIT-94264 + - TIT-94164 Note 1 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 TIT-90263 REF DWG E4-02.01 REMOTE I/O PANEL #2 SLOT 1 THRU 4 WIRING SCHEMATIC E4-02.03 NTS ANALOG INPUT MODULE SCALE = NTS ANALOG OUTPUT MODULE SCALE = NTS ANALOG INPUT MODULE SCALE = NTSA D B ANALOG INPUT MODULE SCALE = NTS C WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-02_RIO-2.dwg NOTE: 1. TERMINATE SHIELDS AT GROUNDING TERMINALS PROVIDED IN ENCLOSURE 2. TERMINATE WIRES RED to POSITIVE BLACK to NEGATIVE 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 20. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 + - PCV-94258 + - HCV-92213 Ch0 Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-OE8H Slot 5 Keyswitch 4 ~~ PS4-2+ PS4-2- REF DWG E4-02.01 + - + - HCV-92311 HCV-92313 + - HCV-92411 + - HCV-92413 Note 1 + HCV-93101 - 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 XV-92352 Ch0 Ch1 Ch2 Ch3 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-OB4D Slot 7 Keyswitch 7 ~~ PS4-4+ PS4-4- REF DWG E4-02.01 XV-92358 XV-92458 XV-92452 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 XV-90263 Ch0 Ch1 Ch2 Ch3 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-OB4D Slot 6 Keyswitch 7 ~~ PS4-3+ PS4-3- XV-94109 REF DWG E4-02.01 XV-94209 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 XV-90217 Ch0 Ch1 Ch2 Ch3 Note 1 +V -V 24Vdc Supply In +V -V 24Vdc Supply Out TB-A TB-A TB-BTB-B TB-C TB-C AB 1797-OB4D Slot 8 Keyswitch 7 ~~ PS5-1+ PS5-1- REF DWG E4-02.01 XV-90241 REMOTE I/O PANEL #2 SLOT 5 WIRING SCHEMATIC E4-02.04 NTS ANALOG OUTPUT MODULE SCALE = NTS A NOTE: 1. TERMINATE SHIELDS AT GROUNDING TERMINALS PROVIDED IN ENCLOSURE 2. TERMINATE WIRES RED to POSITIVE BLACK to NEGATIVE WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-02_RIO-2.dwg DIGITAL OUTPUT MODULE SCALE = NTS C DIGITAL OUTPUT MODULE SCALE = NTS B DIGITAL OUTPUT MODULE SCALE = NTS D 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 21. 1 2 3 4 5 6 7 8 9 10 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-05_SumpPanel-6x6.dwg SUMP FLOAT TREE PANEL ASSY GA-90XXX E4-05.01 1:1 TERMINAL No. 1 2 3 4 5 6 7 8 9 10 ITEM NO QTY NOMENCLATURE PART NO MFG 1 1 PANEL 6 X 6 X 4 SS SCE-606ELJSS SAGINAW 2 1 SUB-PANEL 6 X 6 SCE-6P6J SAGINAW 3 1 MOUNTING FEET SCE-ELJMFKSS SAGINAW 4 A/R DIN RAIL 35 MM STD 5 2 END ANCHOR 1492-EAJ35 ALLEN BRADLEY 6 1 END BARRIER 1492-EBJ3 ALLEN BRADLEY 7 10 TERMINAL BLOCK 1492-J3 ALLEN BRADLEY PARTS LIST 5 7 5 6 2 1 3 4 TERMINAL PANEL ASSY / SKID #90202 SCALE = 1:1 A INCOMING DEVICE FLOAT 90XXX HIGH / HIGH FLOAT 90XXX HIGH FLOAT 90XXX LOW RED BLACK RED BLACK RED BLACK CABLE TERMINATIONS NOTE: 1. All conduits to be side or bottom entry. 2. Cable type is specified. Approval must be given for a substitution. 3. Rigid conduit to be installed per NEC Article 342 or 344. All access covers shall be accessible. 4. Liquidtight Flexible metal conduit shall be used to connect to all instruments in such way as to avoid stress at the Liquidtight fitting and in accordance with NEC article 350. 5. All mechanical work will be done in a neat and workman-like manner. 6. Connections to all instruments shall be installed to not obstruct and allow removal for serviceability. 7. All wiring will be Intrinsically Safe and installed per NEC Article 504. 8. Intrinsically Safe conduits shall be labeled as per NEC Article 504. 9. Myers hubs shall be used when connecting to the junction box. 10. Maximum number of Belden 9322 conductors in RMC or IMC are: 0.5" = 4; 0.75" = 7, 1.0" = 11 and 1.25" = 19 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 22. 1 2 3 4 5 6 7 8 9 10 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-05_SumpPanel-6x6.dwg SUMP FLOAT TREE PANEL ASSY GA-90XXX E4-05.02 1:1 ITEM NO QTY NOMENCLATURE PART NO MFG 1 1 PANEL 6 X 6 X 4 SS SCE-606ELJSS SAGINAW 2 1 SUB-PANEL 6 X 6 SCE-6P6J SAGINAW 3 1 MOUNTING FEET SCE-ELJMFKSS SAGINAW 4 A/R DIN RAIL 35 MM STD 5 2 END ANCHOR 1492-EAJ35 ALLEN BRADLEY 6 1 END BARRIER 1492-EBJ3 ALLEN BRADLEY 7 10 TERMINAL BLOCK 1492-J3 ALLEN BRADLEY PARTS LIST 5 7 5 6 2 1 3 4 TERMINAL PANEL ASSY / SKID #90202 SCALE = 1:1 A CABLE TERMINATIONS NOTE: 1. All conduits to be side or bottom entry. 2. Cable type is specified. Approval must be given for a substitution. 3. Rigid conduit to be installed per NEC Article 342 or 344. All access covers shall be accessible. 4. Liquidtight Flexible metal conduit shall be used to connect to all instruments in such way as to avoid stress at the Liquidtight fitting and in accordance with NEC article 350. 5. All mechanical work will be done in a neat and workman-like manner. 6. Connections to all instruments shall be installed to not obstruct and allow removal for serviceability. 7. All wiring will be Intrinsically Safe and installed per NEC Article 504. 8. Intrinsically Safe conduits shall be labeled as per NEC Article 504. 9. Myers hubs shall be used when connecting to the junction box. 10. Maximum number of Belden 9322 conductors in RMC or IMC are: 0.5" = 4; 0.75" = 7, 1.0" = 11 and 1.25" = 19 TERMINAL No. 1 2 3 4 5 6 7 8 9 10 INCOMING DEVICE FLOAT 90XXX HIGH / HIGH FLOAT 90XXX HIGH FLOAT 90XXX LOW RED BLACK RED BLACK RED BLACK 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 23. WIRE PULL SCHEDULE POWER / LIGHT / CLASS 1 - A/C E4-10.01 NTS WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-10_WirePull.dwg 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 24. WIRE PULL SCHEDULE CLASS 1 - D/C & COMMUNICATIONS E4-10.02 NTS WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-10_WirePull.dwg 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 25. WIRE PULL SCHEDULE RIO TO J BOX E4-10.03 NTS WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-10_WirePull.dwg 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 26. A B B RTD AND RESISTANCE (3-WIRE) 2 1 3 4 5 C 1 2 3 4 5 - + H L C POWER SUPPLY AND OUTPUT TERMINAL+- - EXTERNAL INDICATOR (AMMETER) TERMINAL *1 GROUND TERMINAL *1: When using an external indicator or check meter, the internal resistance must be 10 Ohm or less. The hook is not available for Fieldbus communication type (out put signal code F) WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-20_Instruments.dwg TEMPERATURE TRANSMITTER YOKOGAWA - YTA 110 TIT - WIRING DIAGRAM E4-20.01 NTS YOKOGAWA YTA110 SINGLE INPUT TERMINAL WIRE CONNECTION DIAGRAM YOKOGAWA YTA110 TERMINAL DIAGRAM - INSIDE BACK COVERD YOKOGAWA YTA110 INSIDE FRONT COVERA E TERMINAL CONFIGURATION F CHECK METER CONNECTION HOOK *1 YOKOGAWA YTA110 FRONT VIEWB YOKOGAWA YTA110 SIDE VIEWC GROUND TERMINAL 1/2" NPT CONDUIT CONNECTION 4-20 mA CONNECTION RED + BLACK - NOTE: HARDWARE ERROR BURNOUT DIRECTION PINS JUMPER SET TO HIGH THERMOWELL SHOWN FOR REFERENCE NOTE: PLUG ALL UNUSED CONDUIT OPENINGS 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 27. + - 4....20 mA Test Test +- + - 4....20 mA Test Test WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-20_Instruments.dwg PROCESS/DIFFERENTIAL PRESSURE TRANSMITTER ENDRESS + HAUSER - PMD75 / PMP71 LIT / PIT / PDIT- WIRING DIAGRAM E4-20.02 1:2 A INTERNAL GROUND TERMINAL EXTERNAL GROUND TERMINAL INSIDE FRONT COVER WIRING CONNECTION DIAGRAM B DIFFERENTIAL PRESSURE TRANSMITTER ENDRESS + HAUSER - Deltabar S PMD75C TEST JUMPER DIFFERENTIAL PRESSURE TRANSMITTER ENDRESS + HAUSER - Deltabar S PMD75 DIFFERENTIAL PRESSURE TRANSMITTER ENDRESS + HAUSER - Deltabar S PMD75 FRONT VIEW SIDE VIEW 4-20 mA CONNECTION RED + BLACK - D INTERNAL GROUND TERMINAL EXTERNAL GROUND TERMINAL INSIDE FRONT COVER WIRING CONNECTION DIAGRAM TEST JUMPER PRESSURE TRANSMITTER ENDRESS + HAUSER - Cerabar S PMP71 4-20 mA CONNECTION RED + BLACK - E PRESSURE TRANSMITTER ENDRESS + HAUSER - Cerabar S PMP71 FRONT VIEW 1/2" NPT CONDUIT CONNECTION NOTE: PLUG ALL UNUSED CONDUIT OPENINGS 1/2" NPT CONDUIT CONNECTION 1/2" NPT CONDUIT CONNECTION 1/2" NPT CONDUIT CONNECTION 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 28. 1 2 3 4 5 6 7 8 9 10 - + A VIOLET B YELLOW C ORANGE D BROWN E WHITE F GREEN G RED H GRAY I BLUE C K G D J B A H I E F A B C I D E F H G A BROWN B VIOLET C YELLOW D ORANGE E GRAY F BLUE G WHITE H GREEN I RED J MOUNTING SCREW K GROUND SCREW (BLACK) A VIOLET B YELLOW C ORANGE D BROWN E WHITE F GREEN G RED H GRAY I BLUE WIRE COLOR SENSOR TERMINAL REMOTE CORE PROCESSOR TERMINAL FUNCTION BLACK NO CONNECTION GROUND SCREW (SEE NOTE) DRAIN WIRES BROWN 1 1 DRIVE + RED 2 2 DRIVE - ORANGE 3 3 TEMPERATURE - YELLOW 4 4 TEMPERATURE RETURN GREEN 5 5 LEFT PICKOFF + BLUE 6 6 RIGHT PICKOFF + VIOLET 7 7 TEMPERATURE + GRAY 8 8 RIGHT PICKOFF - WHITE 9 9 LEFT PICKOFF - NOTE: Ground the shield drain wires (the black wire) only on the core processor end, by connecting it to the ground screw inside the lower conduit ring. Never ground to the core processor's mounting screw. Never ground the cable at the sensor junction box. WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-20_Instruments.dwg FLOW TRANSMITTER/FLOW ELEMENT MICRO MOTION FIT/FE - WIRING DIAGRAM E4-20.03 NTS INSIDE COVER SIDE VIEW TRANSMITTER TERMINALS Micro Motion 2700 INTERNAL WIRE CONNECTION DIAGRAM E 1/2" NPT POWER INPUT 3/4" NPT 9 Wire Cable to SENSOR SENSOR TERMINALS CMF 100, 200, 300 INTERNAL WIRE CONNECTION DIAGRAM C SENSOR TERMINALS CMF 100, 200, 300 WIRE COLOR CODE DIAGRAM G TRANSMITTER TERMINALS Micro Motion 2700 WIRE COLOR CODE DIAGRAM F 24 VDC TRANSMITTER TERMINALS Micro Motion 2700 INTERNAL WIRE CONNECTION DIAGRAM A FRONT VIEW Micro Motion 2700B EXTERNAL GROUND 1/2" NPT 4-20 mA CONNECTION 4-20 mA HART RED + BLACK - RED + BLACK - GROUND SENSOR TERMINAL - J-BOX CMF 100, 200, 300D 3/4" NPT 9 Wire Cable to SENSOR VIEW A-A INSIDE COVER -A- -A- INSIDE BOTTOM COVER FLOW ELEMENT TO FLOW SENSOR CONNECTION Micro Motion 2700 TO CMF 100, 200, 300 WIRE COLOR CODE DIAGRAM H NOTE: PLUG ALL UNUSED CONDUIT OPENINGS 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 29. 1211 -+ 4-20 IN G Y R BLACK GREEN RED 3 2 1 6 5 4 3 2 1 6 5 4 TOP REED SWITCH (CLOSED) BOTTOM REED SWITCH (OPEN) OPTIONAL SOLENOID WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-20_Instruments.dwg MODULATING & CONTROL VALVES WORCHESTER ZIT / XV / ZSC / ZSO - WIRING DIAGRAM E4-20.04 NTS ZIT-CONNECTION POINTS FLOW/SERVE - Logix 520 si Digital Positioner WIRE CONNECTION DIAGRAM - INSIDE COVER A INTERNAL GROUND TERMINAL PCV / HCV - MODULATING VALVE ASSY FLOW/SERVE - Logix 520 si Digital PositionerB SIDE VIEW ZSO / ZSC CONNECTION POINTS FLOW/SERVE - Auto Max PositionerC INSIDE COVER XCV-CONTROL VALVE / SOLENOID ASSY FLOW/SERVE - Auto Max PositionerD SIDE VIEW XV - SOLENOID 1/2" NPT PCV / HCV ZIT ZIT GROUND TERMINAL XCV ZSO / ZSC 4-20 mA CONNECTION - ZSORED + BLACK - 4-20 mA CONNECTION - ZSC RED + BLACK - INSIDE COVER DETAIL RED + BLACK - 24 VDC CONNECTION RED + BLACK - 4-20 mA CONNECTION MAKE CONNECTION IN CONDULET NOTE: PLUG ALL UNUSED CONDUIT OPENINGS 1/2" NPT CONDUIT CONNECTION 1/2" NPT CONDUIT CONNECTION 1/2" NPT CONDUIT CONNECTION 1/2" NPT CONDUIT CONNECTION 1/2" NPT CONDUIT CONNECTION 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 30. - + 4-20 mA - TB1 F1 GND NEUT HOT CONTROL CONTACTS FUSE 1 2 3TB2 1 2 3 4 5 6 7 8 9 10 11 12 TB1 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-20_Instruments.dwg LEVEL SWITCH - COSENSE LL-108 AS - WIRING DIAGRAM TOP TECH / SCULLY GROUNDHOG E4-20.05 NTS COSENSE LL-108 TERMINAL WIRE CONNECTION DIAGRAMA B 4-20 mA CONNECTIONRED + BLACK - COSENSE LL-108 SIDE VIEW 3/4" NPT CONDUIT CONNECTION 3/4" NTP NOTE: PLUG ALL UNUSED CONDUIT OPENINGS GROUNDHOG PLUG SCULCON BOX MODEL SC47CC ST-47-120/240E(LK) GROUNDHOG CONDUIT INTRINSICALLY SAFE CONTACTS THAT CLOSE ON PERMIT 250 VAC RESISTIVE CONDUIT NON-INTRINSICALLY SAFE WIRING C SCULLY GROUNDHOG MODEL ST-47-120/240E (L/K) }120/240 VAC INPUT }HOT NEUTRAL GROUND BLK WHT TB6 J3 10/100 E-NET TB2 COM 0 RS485 TB3 COM 1 RS232 TB4 COM 1 RS485 TB1 POWER 85 - 250 VAC L N GND ETHERNET CAT5 A/C INPUT }LINE NEUTRAL GROUND D TOP TECH MUTLILOAD II / RCU II A/C POWER SUPPLY / COMM BOARD TB5 COM 2 RS232 RxA0 RxB0 TxA0 TxB0 WHT/BLU BLU/WHT WHT/ORG ORG/WHT RS-485 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 31. 60 1 54 12 13 20 21 32 33 44 45 47 6263656668 48 53 54 56 57 59 13 12 11 10 9 8 7 6 5 4 3 2 1 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-20_Instruments.dwg DET-TRONICS / EAGLE QUANTUM PREMIER GAS SENSOR / FLAME DETECTOR WIRING DIAGRAM E4-20.06 NTS A DET-TRONICS EQP CONTROLLER TERMINAL IDENTIFICATION P10: TERMINALS 60 TO 62 - PORT 2 RS-485 MODBUS RTU MASTER / SLAVE NOTE: PLUG ALL UNUSED CONDUIT OPENINGS SERIAL COMMUNICATION BOARD (OPTIONAL) P9: TERMINALS 57 TO 59 RS-232 S3 CONFIGURATION PORT P8: TERMINALS 54 TO 56 - PORT 1 RS-485 MODBUS RTU MASTER / SLAVE P7: TERMINALS 48 TO 53 LON CONNECTIONS P6: TERMINALS 45 TO 47 FAULT RELAY (NC CONTACTS) P11: TERMINALS 63 TO 65 - PORT 3 RS-232 MODBUS RTU MASTER / SLAVE OR S3 CONFIGURATION P13: HIGH SPEED SERIAL LINK (HSSL) RS-232 (REDUNDANCY ONLY) P12: TERMINALS 66 TO 68 - PORT 4 RS-232 MODBUS RTU MASTER / SLAVE P5: TERMINALS 33 TO 44 RELAYS 5 TO 8 P4: TERMINALS 21 TO 32 RELAYS 1 TO 4 P1: TERMINALS 1 TO 4 . 24 VDC INPUT POWER P2: TERMINALS 5 TO 12 . DIGITAL INPUTS 1 TO 4 P3: TERMINALS 13 TO 20 . DIGITAL INPUTS 5 TO 8 CONTROLNET BNC CONNECTOR A CONTROLNET BNC CONNECTOR B NOTE: 1. INPUT VOLTAGE AT THE CONTROLLER MUST BE 18 VDC MIN. 2. REFER TO WIRE PULL SCHEDULE, DWG E4-10 FOR VOLTAGE DROP. 3. SHIELDS ON POWER CABLES MUST BE CONNECTED TO CHASSIS GROUND. 3/4 NTP METHANE SENSOR - MODEL PIRECL TERMINAL BLOCK DIAGRAMB FLAME DETECTOR -MODEL X3301 TERMINAL BLOCK DIGRAM (EQP MODEL)C 16 COM 2 SHIELD 15 COM 2A 14 COM 2B 13 POWER SHIELD 12 24 VDC + 11 24 VDC - 6 COM 1 SHIELD 5 COM 1A 4 COM 1B 3 POWER SHIELD 2 24 VDC + 1 24 VDC - 3/4 NTP3/4 NTP 3/4 NTP EARTH GROUND LUG 24 VDC - 24VDC + 24 VDC SHIELD 24 VDC - 24 VDC + 24 VDC SHIELD COM 1 A COM 1 B COM 1 SHIELD COM 2 A COM 2 B COM 2 SHIELD CALIBRATE 1 2 3 4 5 6 7 8 9 10 11 12 13 (COVER REMOVED) (COVER REMOVED) 48 24 VDC - 24VDC + 24 VDC SHIELD 24 VDC - 24 VDC + 24 VDC SHIELD COM 1 A COM 1 B COM 1 SHIELD COM 2 A COM 2 B COM 2 SHIELD CALIBRATE 1 2 3 4 5 6 7 8 9 10 11 12 13 IR HYDROCARBON GAS DETECTOR (TYP) MODEL PIRECL (GAS SENSOR) 1 6 11 16 DET-TRONICS EAGLE QUANTUM PREMIER (EQP) P7: LON CONNECTIONS IR FLAME DETECTOR (TYP) MODEL X3301 (FIRE EYE) SHIELD 1B 1A SHIELD 2B 2A COM 1 COM 2 TYPICAL DEVICE CONNECTIONS COM AND 24 VDC POWERD RETURN FROM COM 2 LAST SENSOR 24 VDC POWER 24 VDC + 24 VDC - 24 VDC SHIELD GND ADDITIONAL DEVICES BELDEN 3073F BELDEN 9367 OR 9314 NOTE: 1. REFER TO WIRE PULL SCHEDULE, DWG E4-10 FOR VOLTAGE DROP BLU WHT BLU WHT BLU WHT BLU WHT BLK RED WHT BLK RED WHT BLK RED WHT BLK RED WHT WHT BLK RED WHT BLU WHT BLU 53 NOTE: 1. DO NOT GROUND ANY SHIELDS TO DETECTOR HOUSING. 2. FOR ATEX INSTALLATIONS, THE X3301 FLAME DETECTOR HOUSING MUST BE ELECTRICALLY CONNECTED TO EARTH GROUND. NOTE: 1. DO NOT GROUND ANY SHIELDS TO DETECTOR HOUSING. 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 32. REMOTE - I/O PANEL CABLE DISRTIBUTION SCALE = NTS WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-30_Equip-Conduit_Cable.dwg REMOTE I/O PANEL CABLE DISTRIBUTION E4-30.01 NTS RIO #1 SKID GA-90201 J-BOX RIO #2 FROM RIO #1 BELDEN 3008AE GA-94101 J-BOX GA-94201 J-BOX GA-90230 SUMP PUMP IS J-BOX FROM RIO #1 BELDEN 3008AE FROM RIO #2 BELDEN 3004AEFROM RIO #2 BLEDEN 3008AE CLASS 1 WIRING FROM CONTROL PANEL CP-01 CONTROL PANEL PROCESS AUTOMATION CONTROL CLEAN GROUND BAR IN CONTROL BUILDING CLASS 1 - D/C RETURN GROUND INTRINSICALLY SAFE RG6/U CLASS 1 - A/C RIO POWER UNDER GROUND CONDUIT I.S. CABLE IN TRAY FROM CP-01 Class 1 - D/C YS 94201 FIT 94201 CONDUIT FROM CABLE TRAY TO INSTRUMENT OR J-BOX FROM CP-01 FIT 90217 FIT 90218 FIT 90256 FROM RIO #1 BELDEN 3010AE SKID GA-92102 J-BOX SKID GA-92202 J-BOX SKID GA-92302 J-BOX SKID GA-92402 J-BOX FROM RIO #1 BELDEN 3010AE FROM RIO #1 BELDEN 3008AE FROM RIO #2 BELDEN 3004AE FROM RIO #2 BELDEN 3006AE SKID GA-92902 FROM RIO #2 PIT 29224, BELDEN 9322 PCV 92924, BELDEN 9322 GA-93130 SUMP PUMP IS J-BOX SKID GA-93101 J-BOX FROM RIO #2 BELDEN 3006AE FROM RIO #1 BELDEN 3004AE FROM RIO #2 BELDEN 3008AE FROM RIO #1 BELDEN 3004AE FROM RIO #2 BELDEN 3008AE FROM RIO #1 BELDEN 3006AE UNDER GROUND CONDUIT FROM RIO #1 BELDEN 3006AE CONDUIT IN TRENCH FROM CP-01 Class 1 - A/C YS 94201 TT LOAD OUT 2 FROM IT - COMM TT LOADOUT 2 ETHERNET / RS485 FROM CP-01 Class 1 - D/C YS 94101 FIT 94101 FROM CP-01 Class 1 - A/C YS 94101 TT LOADOUT 1 FROM IT - COMM TT LOADOUT 1 ETHERNET / RS485 NOTE: 1. SEE WIRE PULL SCHEDULE DWG E4-10 IT CABINET 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 33. SITE LIGHTING CABLE DISTRIBUTION SCHEMATIC WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E4-30_Equip-Conduit_Cable.dwg SITE LIGHTING CABLE DISTRIBUTION E4-30.02 NTS S1 9B S1 11A S1 S1 S1-2 S1-2 S1-2 20B S1 S1-2 18C S1 S1 S1 S1 5B S1-2 S1-2 16C S1 6A S1 7B S1 8A 10A S1 12A 13B 15D 17C S1 19C 4A 3B 2A 14D 1D ATS01,120V PP01, 277V CTP01 PC NOTE: 1. SEE WIRE PULL SCHEDULE DWG E4-10 PP01, 277V PP01, 277V 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 34. SITE LIGHTING PLAN - 30 ft POLES SCALE 1/32" - 1'-0" DOUBLE LAMP / S1-2 SINGLE LAMP / S1 LEGEND AREA CLASSIFICATIONS CLASS 1 DIVISION 2 AREA CLASS 1 DIVISION 1 AREA NOTE: 1. ALL LAMP STANDARDS BASES TO BE ELEVATED ABOVE HAZARDOUS CLASSIFIED AREAS 2. SEE E5-01.01 FOR LAMP SCHEDULE SITE LIGHTING POLE LAYOUT E5-00.01 1/32" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-00_Lighting_Plan.dwg S1.14D S1.13A S1.11B S1.10A S1.9B S1.8A S1.7B S1.6A S1.5B S1.3A S1.1A S1.2B S1.4A S1.12C S1-2.6B S1-2.1D S1-2.5C S1-2.2D S1-2.3C S1-2.4C N SAMPLE NUMBER S1-2.10B CIRCUIT DESIGNATION LAMP IDENTIFICATION No. LAMP TYPE LAMP CODING 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 35. UGPUGP UGP UGP U G P UGP UGP UGPUGP UGP U G P U G P U G P UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP UGP POWER DISTRIBUTION CONDUITS SCALE 1/4" - 1'-0" UNDERGROUND POWER CIRCUITS ENLARGED PLAN E5-01.01 1/32" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-01_Conduit_Plan.dwg 2 AIR TANK 11 kVA 45.8 FLA 240V GENERATOR 45 kVA PRI - 480V SEC - 208Y/120V 300 kVA PRI - 12,470V SEC - 480Y/277V TO WILLIAMS GATE MOTOR OPERATOR NOTE: CONDUIT CAN NOT PASS THRU HAZARDOUS AREA REF DWG E5-10 ENTRY GATE CONDUIT SCALE 1/16" - 1'-0" 1 LUMINARIES DOUBLE LAMP LUMINARIES SINGLE LAMP LEGEND UGC COMMUNICATIONS CONDUIT UGP POWER CONDUIT SLIDE GATE / EXIT MOTOR OPERATOR CT / METER PANEL ATTENDANT BUILDING CONTROL BUILDING DISPERSION FENCE 480V PANEL / PP-01 MTS-01 10 ' BUILDING SET BACK (PROPANE) (2) 10 GAL PROPANE TANKS SLIDE GATE MOTOR OPERATOR TO ENTRY/EXIT GATE MOTOR OPERATOR SLIDE GATE / ENTRY MOTOR OPERATOR NOTE: 1. DEVICE LOCATIONS ARE FOR REFERENCE ONLY FIELD DETERMINE FINAL LOCATION. 2. SEE WIRE PULL SCHEDULE - REF DWG E4-10 HEAT PUMP HEAT PUMP PB01 TO PB02 ATS01 TO ATS02 CLASS 1 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 36. SITE LIGHTING PLAN - UNDERGROUND CONDUIT COORDINATION SCALE 1/32" - 1'-0" DOUBLE LAMP (S1-2) SINGLE LAMP (S1) LEGEND SITE LIGHTING UNDERGROUND CONDUIT LAYOUT E5-01.02 1/32" = 1'-0" BACK-UP GENERATOR CIRCUIT (D) / ATS-01-1 CIRCUIT (C) / PP-01 CIRCUIT (B) / PP-01 CIRCUIT (A) / PP-01 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-01_Conduit_Plan.dwg S1.1D S1.2A S1.3B S1.4A S1.5B S1.6A S1.7B S1.8A S1.9B S1.10A S1.11A S1.13B S1.12A S1.19C S1-2.20B S1-2.14D S1-2.18C S1-2.15D S1-2.16C S1-2.17C N CONDUIT SEAL (ALL CONDUIT THAT PASSES THRU HAZARDOUS AREAS, EACH END, PER N.E.C.) SAMPLE NUMBER S1-2.10B CIRCUIT DESIGNATION LAMP IDENTIFICATION No. LAMP TYPE LAMP CODING CTP-01 NOTE: 1. DEVICE LOCATIONS ARE FOR REFERENCE ONLY FIELD DETERMINE FINAL LOCATION. 2. SEE WIRE PULL SCHEDULE - REF DWG E4-10 3. REF DWG E4-30.02 FOR SCHEMATIC LAYOUT CTP-01 CTP-01 CTP-01 CTP-01 CTP-01 CTP-01 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 37. U G C EQUIPMENT CONDUIT RUNS SCALE 1/8" - 1'-0" UNDERGROUND CONDUIT LAYOUT E5-01.03 1/32" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-01_Conduit_Plan.dwg 1 INTRINSICALLY SAFE (CONTROLNET) CLASS 1 - D/C (RETURN GROUND) CLASS 1 - A/C (RIO) A/C POWER (P93101, P93102) A/C POWER (P93130, P90230) CLASS 1 - A/C (YS / TOP TECH) CLASS 1 -A/C (P90230) CLASS 1 - D/C (YS / FIT) CLASS 1 - D/C (GA-90201 / FIT) (FIT) (SCULLY, YS) (TOP TECH) N SUMP PUMP (P93130) [CONDUITS TRANSITION TO SKID J-BOX] CONDUITS TRANSITION TO RUN ON CABLE SUPPORTS IN TRENCH (SEALS REQUIRED AT EACH END) COMM (TOP TECH) COMMUNICATIONS COMMUNICATIONS ENTRANCE NOTE: 1. DEVICE LOCATIONS ARE FOR REFERENCE ONLY FIELD DETERMINE FINAL LOCATION. 2. SEE WIRE PULL SCHEDULE - REF DWG E4-10 CLASS 1 - D/C (P90230) 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 38. GS GS GS GS GS GS CA CA CR CR CR CR CR FE FE FE ES ES ES CRES CR CR GS ES #3 GS ES FE CR CR SITE SAFETY/ SECURITY DEVICE PLAN SCALE 1/32" - 1'-0" SITE SECURITY & SAFETY DEVICE PLAN E5-02.01 1/32" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-02_Safety_Plan.dwg DOUBLE LAMP SINGLE LAMP LEGEND FIRE EYE EMERGENCY STOP GAS SENSOR CAMERA CARD READER FE ES GS CA CR 1 DISPERSION FENCE SECURITY FENCE PROPERTY LINE N PEDESTRIAN GATE PANIC BAR EXIT/ CARD ENTRANCE MAIN GATE CARD EXIT PEDESTRIAN GATE CARD ENTRANCE / EXIT VEHICLE GATE CARD ENTRANCE / EXIT MAIN GATE CARD ENTRANCE DISPERSION FENCE NOTE: 1. DEVICE LOCATIONS ARE FOR REFERENCE ONLY FIELD DETERMINE FINAL LOCATION . 2. SEE WIRE PULL SCHEDULE - REF DWG E4-10 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 39. GS GS GS GS GS GS CA CA CR CR CR CR CR FE FE FE ES ES ES CRES CR CR GS ES #1 #2 AT-90052 HS-90002 AT- 90053 AT-90002 HS-90004 AT-90054 AT-90055 AT-90003 AT-90056 AT-90058 AT-90004 AT-90057 HS-90005 #7 #10 #3 #3 #4 HS-90006 #5 #6 HS-90003 AT-90001 GS ES AT-90051 HS-90001 FE CR CR #8 #9 DOUBLE LAMP SINGLE LAMP LEGEND E-STOP CONDUIT PLAN E5-02.02 NTS FIRE EYE EMERGENCY STOP GAS SENSOR CAMERA WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-02_Safety_Plan.dwg SAFETY DEVICE / E-STOP CONDUIT ROUTING SCALE = NTS 1 CARD READER FE ES GS CA CR E-STOP 1/2" CONDUIT DISPERSION FENCE N SECURITY FENCE PROPERTY LINE TO FIRE SAFETY PANEL NOTE: 1. DEVICE LOCATIONS ARE FOR REFERENCE ONLY FIELD DETERMINE FINAL LOCATION. 2. SEE WIRE PULL SCHEDULE - REF DWG E4-10 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 40. GS GS GS GS GS GS CA CR CR FE FE FE ES ES ES GS ES #1 #2 AT-90052 HS-90002 AT- 90053 AT-90002 HS-90004 AT-90054 AT-90055 AT-90003 AT-90056 AT-90058 AT-90004 AT-90057 HS-90006 HS-90003 AT-90001 GS ES AT-90051 HS-90001 FE DOUBLE LAMP SINGLE LAMP LEGEND SITE SAFETY DEVICE CONDUIT PLAN E5-02.04 1/16"=1'-0" FIRE EYE EMERGENCY STOP GAS SENSOR CAMERA WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-02_Safety_Plan.dwg FIRE EYE - GAS SENSOR / CONDUIT ROUTING SCALE : 1/6"=1'-0" 1 CARD READER FE ES GS CA CR FIRE EYE / GAS SENSOR 1" CONDUIT DISPERSION FENCE NTO FIRE SAFETY PANEL NOTE: 1. DEVICE LOCATIONS ARE FOR REFERENCE ONLY FIELD DETERMINE FINAL LOCATION. 2. SEE WIRE PULL SCHEDULE - REF DWG E4-10 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 41. GS GS GS GS GS GS CA CA CR CR CR CR CR FE FE FE ES ES ES CRES CR CR GS ES #1 #2 AT-90052 HS-90002 AT- 90053 AT-90002 HS-90004 AT-90054 AT-90055 AT-90003 AT-90056 AT-90058 AT-90004 AT-90057 HS-90005 #7 #10 #3 #3 #4 HS-90006 #5 #6 #2 HS-90003 AT-90001 GS ES AT-90051 HS-90001 FE CR CR #8 #9 DOUBLE LAMP SINGLE LAMP LEGEND CARD READER CONDUIT PLAN E5-02.03 NTS FIRE EYE EMERGENCY STOP GAS SENSOR CAMERA WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-02_Safety_Plan.dwg CARD READER CONDUIT ROUTING SCALE: 1/32"=1'-0" 1 CARD READER FE ES GS CA CR CARD READER - 1" CONDUIT DISPERSION FENCE N SECURITY FENCE PROPERTY LINE TO FIRE / SAFETY PANEL NOTE: 1. DEVICE LOCATIONS ARE FOR REFERENCE ONLY FIELD DETERMINE FINAL LOCATION. 2. REFER TO STONE SECURITY FOR INSTALLATION DETAILS, WIRE TYPE, SIZE AND QTY. 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 42. GS GS GS GS GS GS CA CA CR CR CR CR CR FE FE FE ES ES ES CRES CR CR GS ES #1 #2 AT-90052 HS-90002 AT- 90053 AT-90002 HS-90004 AT-90054 AT-90055 AT-90003 AT-90056 AT-90058 AT-90004 AT-90057 HS-90005 #7 #10 #3 #3 #4 HS-90006 #5 #6 #2 HS-90003 AT-90001 GS ES AT-90051 HS-90001 FE CR CR #8 #9 DOUBLE LAMP SINGLE LAMP LEGEND CAMERA CONDUIT PLAN E5-02.05 NTS FIRE EYE EMERGENCY STOP GAS SENSOR CAMERA WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-02_Safety_Plan.dwg CAMERA CONDUIT ROUTING SCALE: 1/32"=1'-0" 1 CARD READER FE ES GS CA CR CAMERA - 1-1/4" CONDUIT DISPERSION FENCE N SECURITY FENCE PROPERTY LINE TO FIRE / SAFETY PANEL TO FIRE / SAFETY PANEL NOTE: 1. DEVICE LOCATIONS ARE FOR REFERENCE ONLY FIELD DETERMINE FINAL LOCATION. 2. REFER TO STONE SECURITY FOR INSTALLATION DETAILS, WIRE TYPE, SIZE AND QTY. 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 43. FE GS FE GS CA FE GS DETAILS E5-02.06 NTS WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-02_Safety_Plan.dwg DEVICE LOCATION ELEVATION POLE MOUNT DEVICE / ELEVATION SCALE = 1/4" - 1'-0" 1 DEVICE LOCATION ELEVATION LAMP STANDARD MOUNTING A B 6'-2" 10'-10" 22' GRADE SEAL CONDUIT DETAIL SCALE = 1/4" - 1'-0" 2 SEAL 3/4" FLEX 24" MAX LG 1" CONDUIT 1" CONDUIT 3/4" FLEX 24" MAX LG SEAL SEAL GRADE 1" CONDUIT 1. MOUNTING POLE NOT SHOWN 2. CLASS 1 WIRING - D/C 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 44. CLASSIFICATION LEGEND CLASS 1 DIVISION 2 AREA HAZARDOUS CLASSIFICATION AREAS SCALE 1/16" - 1'-0" CLASS 1 DIVISION 1 AREA DETAIL -A- -A- 10 FT SETBACK 208/120 XFMR 11 kVA GENERATOR AIR TANK 2 - 10 GAL PROPANE TANKS LIQUID NATURAL GAS AND PROPANE NOTES: -CLASS 1 DIV. 1 ALL BELOW GRADE SUMPS AND TRENCHES, 5' IN ALL DIRECTIONS OF VENTS, HOSES,& COUPLINGS -CLASS 1 DIV 2, 15' IN ALL DIRECTIONS OF PIPING, HOSES AND TANKS 480/277 XFMR HAZARDOUS AREA CLASSIFICATIONS SITE PLAN E5-10.01 1/16" = 1'-0" CONDENSING UNIT WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-10_ClassArea.dwg N CONTROL BUILDING ATTENDANT BUILDING 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 45. CLASSIFICATION LEGEND CLASS 1 DIVISION 2 AREA HAZARDOUS CLASSIFICATION AREAS - FRONT ELEVATION SCALE 1/8" - 1'-0" CLASS 1 DIVISION 1 AREA HAZARDOUS CLASSIFICATION AREAS - SIDE ELEVATION SCALE 1/8" - 1'-0" LAMP NOT IN HAZARDOUS AREA LIQUID NATURAL GAS AND PROPANE NOTES: -CLASS 1 DIV. 1 ALL BELOW GRADE SUMPS AND TRENCHES, 5' IN ALL DIRECTIONS OF VENTS, HOSES,& COUPLINGS -CLASS 1 DIV 2, 15' IN ALL DIRECTIONS OF PIPING, HOSES AND TANKS HAZARDOUS LOCATION AREAS FRONT & SIDE ELEVATION E5-10.02 1/8" = 1'-0" GRADE SEE SHEET E5-10.03 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-10_ClassArea.dwg DISPERSION FENCE 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 46. CLASSIFICATION LEGEND CLASS 1 DIVISION 2 AREA CLASS 1 DIVISION 1 AREA HAZARDOUS CLASSIFICATION AREAS - SIDE ELEVATION SCALE 1/8" - 1'-0" LIQUID NATURAL GAS AND PROPANE NOTES: -CLASS 1 DIV. 1 ALL BELOW GRADE SUMPS AND TRENCHES, 5' IN ALL DIRECTIONS OF VENTS, HOSES,& COUPLINGS -CLASS 1 DIV 2, 15' IN ALL DIRECTIONS OF PIPING, HOSES AND TANKS CONTAINMENT LAMP NOT IN HAZARDOUS AREA HAZARDOUS LOCATION AREAS SIDE ELEVATION - CONTINUED E5-10.03 1/8" = 1'-0" GRADE SEE SHEET E5-10.02 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E5-10_ClassArea.dwg DISPERSION FENCE LAMP BASES ELEVATED ABOVE HAZARDOUS CLASSIFICATION AREAS 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 47. 20' 10' 6 2 1 16 15 14 8 13 10 9 4 CONTROL / COMPRESSOR BUILDING PLAN E7-00.01 1/2" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-00_Build_10x20.dwg 12 14 19 18 B D CA CONTROL BUILDING CIRCUIT RUNS SCALE 1/2" - 1'-0" 2CONTROL BUILDING EQUIPMENT PLAN SCALE 1/2" - 1'-0" 1 11 E7-00.02 3 E7-00.01 1 E7-00.02 4 E7-00.01 2 E7-00.02 CONTROL BUILDING FRONT ELEVATION SCALE 1/2" - 1'-0" 3 CONTROL BUILDING REAR ELEVATION SCALE 1/2" - 1'-0" 4 1416 15 10 UPS 9 CONTACTOR PANEL - CTP01 8 MANUAL TRANSFER SWITCH / 7 FIRE / SECURITY PANEL FS01 6 ATS PANEL - AST01 5 CONTROL PANEL - CP01 4 MAIN 480 / 277 V PANEL - PP01 3 AIR DRYER 2 WATER SEPARATOR 1 AIR COMPRESSOR 16 15 208 Y/ 120 PANEL - PB01 14 WIRE GUTTER 13 12 11 AIR HANDLER LEGEND DOOR WINDOW SURGE PROTECTOR MAIN DISCONNECT - MTS01 17 DC GROUND BAR CURRENT TRANSFORMER METER BASE 18 19 PHOTO CELL20 21 22 23 PHONE EMERGENCY PHONE CARD READER 24 FIRE PULL STATION 25 EMERGENCY STOP 26 TELCO GROUND BAR 27 TELEPHONE DE-MARK 28 NETWORK INTERFACE 29 TELCO ENTRANCE 30 IT CABINET (W/ DRIP PAN IF REQUIRED) NOTE 1. SURFACE MOUNT ALL CONDUIT AND EQUIPMENT 5 31 32 120 SUB-PANEL - PB02 ATS SUB-PANEL - ATS02 33 33 CONTACTOR PANEL - CTP02 = ITEMS PROVIDED BY TRANSFUELS * * * * * * * * * * * * 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 48. 9 8 4 13 CONTROL / COMPRESSOR BUILDING EXTERIOR E7-00.02 1/2" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-00_Build_10x20.dwg 9 18 19 CONTROL BUILDING END VIEW SCALE 1/2" - 1'-0" 1 CONTROL BUILDING EQUIPMENT INTERIOR SCALE 1/2" - 1'-0" D SCALE 1/2" - 1'-0" A CONTROL BUILDING END VIEW SCALE 1/2" - 1'-0" 2 SCALE 1/2" - 1'-0" SCALE 1/2" - 1'-0" C 5 17 12 6 10 11 7 21 2 3 11 7 6 12 CONTROL BUILDING EQUIPMENT INTERIORB CONTROL BUILDING EQUIPMENT INTERIOR CONTROL BUILDING EQUIPMENT INTERIOR 16 15 GROUND FUTURE CONTROLS TO CLEAN 1 GROUND FROM ROI #1 6'-6" 33 (CONDUIT ROUTING FOR REFERENCE ONLY) 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 49. ATTENDANT BUILDING INTERIOR E7-00.03 1/2" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-00_Build_10x20.dwg 20' 10' 6 16 15 B D CA ATTENDANT BUILDING CIRCUIT RUNS SCALE 1/2" - 1'-0" 2ATTENDANT BUILDING EQUIPMENT PLAN SCALE 1/2" - 1'-0" 1 E7-00.04 3 E7-00.03 1 E7-00.04 4 E7-00.03 2 E7-00.04 ATTENDANT BUILDING FRONT ELEVATION SCALE 1/2" - 1'-0" 3 ATTENDANT BUILDING REAR ELEVATION SCALE 1/2" - 1'-0" 4 B D FE E7-00.04 24 22 25 23 16 6 12 7 30 15 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 50. ATTENDANT BUILDING ELEVATIONS E7-00.04 1/2" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-00_Build_10x20.dwg ATTENDANT BUILDING END ELEVATION SCALE 1/2" - 1'-0" 1 ATTENDANT BUILDING END ELEVATION SCALE 1/2" - 1'-0" 2 SCALE 1/2" - 1'-0" D SCALE 1/2" - 1'-0" A SCALE 1/2" - 1'-0" B ATTENDANT BUILDING EQUIPMENT INTERIOR SCALE 1/2" - 1'-0" D ATTENDANT BUILDING EQUIPMENT INTERIOR ATTENDANT BUILDING EQUIPMENT INTERIOR ATTENDANT BUILDING EQUIPMENT INTERIOR 6 7 11 7 30 16 15 11 15 14 21 27 29 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 51. ATTENDANT BUILDING ELEVATIONS E7-00.05 1/2" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-00_Build_10x20.dwg SCALE 1/2" - 1'-0" F SCALE 1/2" - 1'-0" E ATTENDANT BUILDING EQUIPMENT INTERIOR ATTENDANT BUILDING EQUIPMENT INTERIOR 30 15 31 32 27 28 26 29 SUB PANEL SUB PANEL 7 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 52. G 45KVA Pri: 480V Sec: 208Y/120V SERVICE ENTRANCE DS-1 ENTRANCE ATTENDANT BUILDING A/H A/H PB02 PB01 ATS01 CONTROLNET TO RIO #1 A/C POWER - P93101 / P93102 YS94101 / 94201, TOP TECH #1 & #2 YS 94102 / 94201- FIT 94101 / 94201 HEAT PUMP 02 HEAT PUMP 01 GATE MOTOR #1 / #2 GATE MOTOR #3 RIO CLEAN GROUND RETURN FIBER FROM WILLIAMS LIGHTING COMM CP01 CTP01 PP01 FS01 (FE / GS) CARD READER CARD READER IT ATS02 CONTROL BUILDINGCONTROL BUILDING CONTROL BUILDING BUILDING CONDUIT PLAN ROUTING E7-00.05 1/2" = 1'-0" WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-00_Build_10x20.dwg CTP02 (FE / GS) A/C POWER - RIO PWR SUPPLY ATTENDANT BUILDING - HS90003 A/C POWER CLASS 1 - A/C CLASS 1 - D/C FIT 90217 / 90218 / 90256 HS 90002 / 90001 / 90004 HS 90005 HS 90006 COMM CLASS 1 - D/C ATS - A/C POWER CLASS 1 - D/C TOP TECH #1 & #2 CAMERA CAMERA P93130 / P90230 A/C POWER NOTE: 1. CONTRACTOR SHALL BE RESPONSIBLE FOR SEPARATION OF CIRCUITS PER NEC 2. CONDUIT LOCATION FOR REFERENCE ONLY 3. HOME RUN ALL COMM AND I.S. CIRCUITS 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 53. WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-10_RIO_Install.dwg REMOTE I/O ASSY EQUIPMENT INSTALLATION E7-10.01 1:8 PARTS LIST ITEM MATERIAL QTY PART NUMBER MFG 1 RIO ENCLOSURE CABINETS 1 THRU 3 3 SCE-24EL2408SSLP SAGINAW 2 POWER SUPPLY 5 1797-PS1N ALLEN BRADLEY 3 CONDUIT BOX, "T", 3/4" W/ COVER 5 EABT26 CROUSE HINDS 4 CONDUIT BODY, "LB", 3/4" W/COVER 2 LB27 CROUSE HINDS 5 CONDUIT BODY, "TB", 3/4" W/COVER 3 T27 CROUSE HINDS 6 CONDUIT FITTING, PULL ELBOW, M - F, 3/4" 5 811 CROUSE HINDS 7 CONDUIT SEAL 3/4" MALE 10 EYS21 CROUSE HINDS 8 CONDUIT SEAL 1/2" MALE 2 EYS11 CROUSE HINDS 9 MYERS HUB 3/4" 3 ST2 CROUSE HINDS 10 MYERS HUB 1/2" 4 ST1 CROUSE HINDS 11 BUSHING, 3/4" M - 1/2" F 11 XXXX CROUSE HINDS 12 UNION 3/4" M 5 UNY205 CROUSE HINDS 13 UNION 1/2" M 9 UNY105 CROUSE HINDS 14 CLOSE NIPPLE, 3/4" 5 HARDWARE 15 STRUT NUT 3/8-16 UNC, S.S. 8 P3008U UNISTRUT 16 STRUT NUT 1/4-20 UNC, S.S. 15 P3006U1420 UNISTRUT 17 HHCS 3/8-16 UNC X 1-1/2" S.S. 8 HARDWARE 18 HHCS 1/4-20 UNC X 1-1/2" S.S. 15 HARDWARE NOTE: 1. ASSEMBLY TO BE INSTALLED IN C1,D1 AREA. 2. ALL NON I.S. WIRING SHALL BE INSTALLED IN ACCORDANCE WITH NEC ARTICLES 500 AND 501 (C1, D1). 3. PLUG ALL UNUSED CONDUIT OPENINGS. 4. ALL CONDUITS TO BE SIDE OR BOTTOM ENTRY. 5. RIGID CONDUIT TO BE INSTALLED PER NEC ARTICLE 342 OR 344. 6. ALL INTRINSICALLY SAFE WIRING SHALL BE INSTALLED AND LABELED PER NEC ARTICLE 504. 1 REMOTE I/O EQUIPMENT ASSY SCALE: 1:8 2 TANK 903 7 4 14 6 7 3 1 12 8 10 13 4 5 11 SECTION -A- SCALE: 1:4 SECTION -B- SCALE: 1:4 SECTION -C- SCALE: 1:4 A - C - B - 5 14 6 4 10 8 13 11 RIO FRAME ASSY MOUNTED TO TANK SKID SEE DWG E7-10.02 16 18 16 18 (MOUNT WITH) 15 17 (MOUNT WITH) (MOUNT WITH) 13 9 10 12 CLASS 1 WIRING GROUND RETURN TO PROCESS CONTROL CLEAN GROUND COMM WIRING CLASS 1 WIRING CLASS 1 WIRING I.S. WIRING I.S. WIRING I.S. WIRING I.S. WIRING I.S. WIRING I.S. WIRING 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 54. WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-10_RIO_Install.dwg REMOTE I/O ASSY RIO FRAME INSTALLATION E7-10.02 1:8 PARTS LIST ITEM PART QTY PART NUMBER MFG 1 RIO FRAME ASSY 1 E7-10.05 CUSTOM 2 HHCS, 1/2-13 UNC, HDG 12 HARDWARE 3 WASHER 1/2 PLAIN, HDG 12 HARDWARE NOTE: 1. INSTALL RIO SUPPORT FRAME ON TANK SKID 903 2. DIMENSIONAL TOLERANCE = +/- 1/16" A - 3 DRILL AND TAP MOUNTING ARM 1/2-13 UNC (2 PL EACH MOUNTING POINT, MATCH PATTERN IN STRUT)11" 1 RIO FRAME INSTALLATION SCALE: 1:8 SECTION -A- SCALE: 1:8 1 2 (MOUNT WITH) RIO MOUNTING ARM MOUNTED TO TANK SKID 903 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 55. WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-10_RIO_Install.dwg TransFuels LLC 3760 Commons Lane, Salt Lake City, UT 84104 PLYMOUTH BULK LNG TRANSFER STATION REMOTE I/O ASSY SUPPORT ARM INSTALLATION PLYMOUTH, WA 110.47.0001 E7-10.03 1:8 CWP 12-4-13 BKR JCC DM NOTE: 1. INSTALL RIO SUPPORT FRAME ON TANK SKID TK903 2. DIMENSIONAL TOLERANCE = +/- 1/16" 2 SUPPORT ARM INSTALLATION SCALE: 1:8 1 SKID FRAME HOLE LOCATIONS SCALE: 1:8 SECTION -B- SCALE: 1:8 A - 1'-81 2" 4" INSTALL ALL SUPPORT ARMS FLUSH TO THIS SURFACE 2" 4" 3 4 4'-105 8"31 2" 31 2" DRILL AND TAP 1/2-13 NC (8 PL) (16 PL) INSTALL ALL SUPPORT ARMS FLUSH TO THIS SURFACE SECTION -A- SCALE: 1:8 B - 3 43 ALIGN WITH LOWER SUPPORT MOUNTING POINT (REF) 10' 1 2 PARTS LIST ITEM PART QTY PART NUMBER MFG 1 RIO FRAME MOUNT ARM 3 E7-10.06-1 CUSTOM 2 STRUT BRACKET 2 P2945HG UNISTRUT 3 HEX HD BOLT 1/2-13 UNC X 2" HDG - A307 OR A563 28 HARDWARE 4 SQ MACHINE NUT, 1/2-13 UNC HDG - A307 OR A563 12 HARDWARE RIO FRAME MOUNT ARM MOUNTED TO TANK SKID 903 INSTALLATION OPTION - NOTE: A. IN LIEU OF DRILLING AND TAPPING FRAME COMPONENTS, FIELD INSTALLATION WELDING OF SUPPORTS SHALL BE ACCEPTABLE. B. IF FIELD WELDING IS OPTIONED, OMIT ALL MOUNTING HOLES. C. FOLLOW FINISH SPECIFICATIONS. (DO NOT OMIT) 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 56. WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-10_RIO_Install.dwg REMOTE I/O ASSY LOWER SUPPORT INSTALLATION E7-10.04 1:8 PARTS LIST ITEM PART QTY PART NUMBER MFG 1 LOWER SUPPORT BRACKET 2 E7-10.06-2 2 LOWER SUPPORT 1 E7-10.06-3 3 HEX HD BOLT 1/2-13 UNC X 2" HDG - A307 OR A563 16 4 SQ MACHINE NUT, 1/2-13 UNC HDG - A307 OR A563 8 5 WASHER 1/2, HEAVY, HDG - A307 OR A563 16 NOTE: 1. INSTALL RIO SUPPORT FRAME ON TANK SKID TK-903 2. DIMENSIONAL TOLERANCE = +/- 1/16" 2 LOWER SUPPORT INSTALLATION SCALE: 1:8 1 MOUNTING BRACKET INSTALLATION SCALE: 1:8 SECTION -B- SCALE: 1:8 SECTION -A- SCALE: 1:8 A - B - 1'-81 2" 4" INSTALL FLUSH WITH FACE OF SUPPORT LEG INSTALL FLUSH WITH FACE OF SUPPORT LEG 1'-01 2" (REF) DRILL AND TAP SUPPORT LEG 1/2-13 UNC (REF) 2" 2 3 16" 4" 1 23 4 5 35 5 16" RIO FRAME SUPPORT MOUNTED TO TANK SKID 903 INSTALLATION OPTION - NOTE: A. IN LIEU OF DRILLING AND TAPPING FRAME COMPONENTS, FIELD INSTALLATION WELDING OF SUPPORTS SHALL BE ACCEPTABLE. B. IF FIELD WELDING IS OPTIONED, OMIT ALL MOUNTING HOLES. C. FOLLOW BLU LNG FINISH SPECIFICATIONS. 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 57. WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-10_RIO_Install.dwg REMOTE I/O ASSY RIO FRAME ASSY E7-10.05 1:8 2'-01 4" 4'-65 8 " 6'-63 4" 9'-11 4" 11'-13 8 " 13'-91 2" 1'-71 8 " (REF) 2'-27 8" 1'-115 8"(REF) 2'-47 8" (REF) 2'-47 8" (REF) 1'-101 2" (REF) 1'-101 2" (REF) 1'-101 2" (REF) 2'-47 8" PARTS LIST ITEM MATERIAL QTY PART NUMBER MFG 1 STRUT 1-5/8 X 1-5/8 X 165.5 2 P1000THG UNISTRUT 2 STRUT 1-5/8 X 1-5/8 X 23.-5/8 7 P1000THG UNISTRUT 3 STRUT 1-5/8 X 1-5/8 X 28-7/8 3 P1000THG UNISTRUT 4 STRUT 1-5/8 X 1-5/8 X 22-1/2 3 P1000THG UNISTRUT 5 BRACKET - L 4 HOLE 4 P1380AHG UNISTRUT 6 BRACKET - L 3 HOLE 2 P1036HG UNISTRUT 7 BRACKET - T 4 HOLE 15 P1031HG UNISTRUT 8 HHCS 1/2-13 UNC X 1-1/2, S.S. 82 HARDWARE 9 STRUT NUT 1/2-13 UNC, S.S. - TOP RETAINER 82 P4010UT UNISTRUT NOTE: 1. STRUT TO BE HOT DIP GALVANIZED 2. BREAK ALL SHARP EDGES, ROUND ALL CORNERS 3. FINISH ALL CUT ENDS WITH MFG APPROVED GALVANIZING COATING 4. HARDWARE AND FASTENERS TO BE STAINLESS STEEL 1 REMOTE I/O FRAME ASSY SCALE: 1:8 125 7 3 6 4 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 58. WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-10_RIO_Install.dwg REMOTE I/O ASSY FRAME COMPONENTS E7-10.06 AS NOTED PARTS LIST ITEM PART QTY PART NUMBER MFG 1 RIO FRAME MOUNT ARM 3 E7-10.06-1 CUSTOM 2 LOWER SUPPORT BRACKET 2 E7-10.06-2 CUSTOM 3 LOWER SUPPORT 1 E7-10.06-3 CUSTOM NOTE: 1. PREP ALL JOINTS AND WELDS PER AWS STANDARDS 2. BREAK ALL SHARP EDGES, ROUND ALL CORNERS 3. SURFACE PREP AND PAINT ALL CARBON STEEL COMPONENTS: 3.1. PER BLU LNG SPEC. 100.00.0001.G2007 4. DIMENSIONAL TOLERANCES = +/- 1/16" 5" 5" 2" 2" 1" 4" 9 16" 13 8 " 2" 2" 4" 1'-01 2" 1'-011 32 " 2" 1'-101 2" 6" 4" 1 4" 4" 6" 1 RIO FRAME MOUNTING ARM SCALE: 1:4 MATERIAL: A36, 2 x 4 x 1/4 TUBE 2 LOWER SUPPORT BRACKET 3 LOWER SUPPORT SCALE: 1:4 MATERIAL: A36, 5 x 5 x 5/16 ANGLE SCALE: 1:8 MATERIAL: A36, 8 x 13.75 CHANNEL 4'-41 4" 23 8" 8".303 1/8 5 8" X 7/8" 2" 4" 5 8 " (REF) 1'-81 2" 2" 1/4 1/4 TYP TYP TYP 1/4 1/4 1/4 1/4 NOTE: INSTALLATION OPTION A. IN LIEU OF DRILLING AND TAPPING FRAME COMPONENTS, FIELD INSTALLATION WELDING OF SUPPORTS SHALL BE ACCEPTABLE. B. IF FIELD WELDING IS OPTIONED, OMIT ALL MOUNTING HOLES. C. FOLLOW BLU LNG FINISH SPECIFICATIONS. 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 59. WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-10_RIO_Install.dwg CABLE TRAY INSTALLATION PLAN E7-20.01 AS NOTED CWP 12-19-13 BKR JCC DM PARTS LIST ITEM PART QTY PART NUMBER MFG 1 CABLE TRAY, 6", STRAIGHT A/R 24A06-06-144 B-LINE 2 CABLE TRAY, 6", 45 deg H 6 4A-06-45-HB12 B-LINE 3 CABLE TRAY, 6", 30 deg V, UP 2 4A-06-30VI-12 B-LINE 4 CABLE TRAY, 6", 30 deg V, DOWN 2 4A-06-30VO-12 B-LINE 5 TRAPEZE SUPPORT KIT, HD GALV w/ SS HDWR A/R 9P-5506-22SH B-LINE 6 THREADED ROD, 1/2" UNC, SS A/R ATR 1/2" SS HARDWARE 7 CONDUIT / CABLE TRAY ADAPTER, 1/2" A/R 9ZN-1155-1/2 B-LINE 8 CONDUIT / CABLE TRAY ADAPTER, 3/4" A/R 9ZN-1155-3/4 B-LINE 9 CONDUIT / CABLE TRAY ADAPTER, 1" A/R 9ZN-1155-1 B-LINE 10 CONDUIT / CABLE TRAY ADAPTER, 1-1/4" A/R 9ZN-1155-1-1/4 B-LINE 11 CANTILEVER BRACKET, 12" 8 B409-12 HDG B-LINE 12 CANTILEVER BRACKET, 24" 4 B409-24 HDG B-LINE 13 STRUT 1-5/8 X 1-5/8 HDG, SLOTTED A/R P1000T HDG UNISTRUT 14 STRUT 1-5/8 X 7/8 HDG, SLOTTED A/R P3300T HDG UNISTRUT B E7-20.02 A E7-20.02 CABLE TRAY TO BE MOUNTED VERTICALLY TO STRUT SUPPORTS IN TRENCH NOTE: 1. INSTALLATION OF CABLE TRAY AND SECURING OF CABLES SHALL BE PER NEC 392 AND 504. 2. ALL CABLE INSTALLED IN CABLE TRY TO BE I.S. CABLING 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 60. WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E7-10_RIO_Install.dwg CABLE TRAY INSTALLATION CABLE TRAY SUPPORT E7-20.02 AS NOTED NOTE: 1. MOUNT ALL CABLE TRAY IN ACCORDANCE WITH MFG REQUIREMENTS 2. BREAK ALL SHARP EDGES, ROUND ALL CORNERS 3. FINISH ALL CUT EDGES WITH MFG APPROVED COATING. 4. INSTRISICALLY SAFE CONDUCTORS TO ENTER CABLE TRAY VIA CONDUIT AND SUPPORTED WITH CONDUIT - CABLE TRAY ADAPTERS. B CABLE TRAY INSTALLATION ELEVATION SCALE: 1/4" = 1'-0" 10' 7'7' TRANSITION TO TOP OF PIPE SUPPORTS SUPPLY ADDITIONAL SUPPORT AS REQUIRED (TYPICAL EACH END) ROUTE CABLE TRAY UNDER SUPPORT FRAME TO AVOID PERSONNEL LADDER SUPPLY SUPPORT MID-SPAN OF TRANSITION (TYPICAL EACH END) (REF) (TYP) (REF) 10' 10' ALIGN CABLE TRAY TO PIPE SUPPORTS (TYPICAL EACH END) SECTION -D- SCALE: 1/4" = 1'-0" SECTION -C- SCALE: 1/4" = 1'-0" ROUTE CABLE TRAY ON TOP OF PIPE SUPPORTS TO PUMP PIT FOR SUPPORTING INTRINSICALLY SAFE CABLES ROUTE CABLE TRAY ON TOP OF PIPE SUPPORTS TO METERING SKID FOR SUPPORTING INTRINSICALLY SAFE CABLES D E7-20.01 1 CABLE TRAY INSTALLATION ENLARGED PLAN SCALE: 1/4" = 1'-0" INSTALL STRUT TO TOP OF PIPE SUPPORT FOR SECURING CABLE TRAY (TYPICAL) A CABLE TRAY INSTALLATION TRENCH SECTION SCALE: 1" = 1'-0" ROUTE CABLE TRAY ON STRUT SUPPORTS IN TRENCH FOR SUPPORTING INTRINSICALLY SAFE CABLES C E7-20.01 12 1 ROUTE CONDUITS ON STRUT SUPPORTS IN TRENCH (TYP) 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615
  • 61. SITE PLAN SCALE = 500:1 SITE LAYOUT E9-00.02 500:1 WILDERNESSsharePorterEnterprisesPdf.SampleLNGPly_E9-00_Cover.dwg N 300 kVA PRI: 12470 V SEC: 480Y/277 V DISPERSION FENCE PROPERTY LINE PROPERTY LINE LNG STORAGE TANKS 1617 DISPERSION FENCE ENTRY / EXIT SLIDE GATES PEDESTRIAN GATE PEDESTRIAN GATE WILLIAMS ENTRY / EXIT SLIDE GATE CONTROL BUILDING ATTENDANT BUILDING 1 1 2 3 4 5 6 7 8 9 10 A B C D E F G Proprietary and Confidential Company Name: Date: Title: Project Name: Drawn: Checked: Engineer: Project Mgr: Approved: Approved: Serial Number: Dwg Number: Scale:Project Location: DO NOT SCALE DRAWING Size: D Rev: P ESystems Engineering Consultants 13323-226th Ave NE Granite Falls, WA 98252 Phone (360) 691-1600 Fax (360) 691-1615