Processes, Threads and Scheduler

MODERN OPERATING SYSTEMS
Third Edition
ANDREW S. TANENBAUM
Chapter 2
Processes and Threads
Tanenbaum, Modern Operating Systems 3 e, (c) 2008 Prentice-Hall, Inc. All rights reserved. 0-13-6006639

outline
 Process
 Threads
 Process scheduling
 Race condition/synchronization

pseudoparallelism
 All modern computers do many things at the
same time
 In a uni-processor system, at any instant,
CPU is running only one process
 But in a multiprogramming system, CPU
switches from processes quickly, running
each for tens or hundreds of ms

Figure 2-1. (a) Multiprogramming of four programs. (b) Conceptual
model of four independent, sequential processes. (c) Only
one program is active at once.
The Process Model

Advantages and Problems
 The parallelism, though a pseudo one, is very
beneficial for users
 However, every coin has two sides…

Execution non-reproducible
 Non-reproducible
 Example at an instant, N＝n，if execution
sequence is ：
 N:＝N＋1；print(N); N:=0; then, N is:n＋1；n＋1；0
 print(N); N:=0; N:＝N＋1； then N is: n；0；1
 print(N); N:＝N＋1；N:=0; then N is: n；n＋1；0
 Another example:
 An I/O process start a tape streamer and wants to
read 1st record
 It decides to loop 10,000 time to wait for the
streamer to speed up
Program A
repeat N:=N+1;
Program B
repeat print(N);N:=0;

Difference between Process and
Program
 Consider an Analogy
 A computer scientist baking a cake for his
daughter
 And his son came in crying for help

Events which cause process creation:
• System initialization.
• Execution of a process creation system call by a
running process.
• A user request to create a new process.
• Initiation of a batch job.
Process Creation

Events which cause process termination:
• Normal exit (voluntary).
• Error exit (voluntary).
• Fatal error (involuntary).
• Killed by another process (involuntary).
Process Termination

Figure 2-2. A process can be in running, blocked, or ready state.
Transitions between these states are as shown.
Process States

Figure 2-3. The lowest layer of a process-structured operating
system handles interrupts and scheduling. Above that layer
are sequential processes.
Implementation of Processes (1)

Figure 2-4. Some of the fields of a typical process table entry.

Figure 2-5. Skeleton of what the lowest level of the operating
system does when an interrupt occurs.

Figure 2-6. CPU utilization as a function of the number of
processes in memory.
Modeling Multiprogramming

summary
 Pseudoparallelism
 Difference between process and program
 Lifecycle of process
 Multiprogramming degree

Thread Usage (1)
A word processor with three threads

Thread Usage (2)
A multithreaded Web server

Thread Usage (3)
 Rough outline of code for previous slide
(a) Dispatcher thread
(b) Worker thread

The Thread Model (2)
 Items shared by all threads in a process
 Items private to each thread

Thread
 Has own program counter, register set, stack
 Shares code (text), global data, open files
 With other threads within a single Heavy-Weight
Process (HWP)
 But not with other HWP’s
 May have own PCB
 Depends on operating system
 Context will involve thread ID, program counter,
register set, stack pointer
 RAM address space shared with other threads in same
process
 Memory management information shared

Making Single-Threaded Code Multithreaded (1)
Conflicts between threads over the use of a global variable

Making Single-Threaded Code Multithreaded (2)
Threads can have private global variables

Threads: Benefits
 User responsiveness
 When one thread blocks, another may handle user I/O
 But: depends on threading implementation
 Resource sharing: economy
 Memory is shared (i.e., address space shared)
 Open files, sockets shared
 Speed
 E.g., Solaris: thread creation about 30x faster than
heavyweight process creation; context switch about 5x
faster with thread
 Utilizing hardware parallelism
 Like heavy weight processes, can also make use of
multiprocessor architectures

Threads: Drawbacks
 Synchronization
 Access to shared memory or shared variables must be
controlled if the memory or variables are changed
 Can add complexity, bugs to program code
 E.g., need to be very careful to avoid race conditions,
deadlocks and other problems
 Lack of independence
 Threads not independent, within a Heavy-Weight
Process (HWP)
 The RAM address space is shared; No memory
protection from each other
 The stacks of each thread are intended to be in
separate RAM, but if one thread has a problem (e.g.,
with pointers or array addressing), it could write over
the stack of another thread

Interprocess Communication
Race Conditions
Two processes want to access shared memory at same time

Therac-25
 Between June 1985 and January 1987, some
cancer patients being treated with radiation were
injured & killed due to faulty software
 Massive overdoses to 6 patients, killing 3
 Software had a race condition associated with
command screen
 Software was improperly synchronized!!
 See also
 p. 340-341 Quinn (2006), Ethics for the Information Age
 Nancy G. Leveson, Clark S. Turner, "An Investigation of the Therac-25
Accidents," Computer, vol. 26, no. 7, pp. 18-41, July 1993
 http://doi.ieeecomputersociety.org/10.1109/MC.1993.274940

Concepts
 Race condition
 Two or more processes are reading or writing
some shared data and the final result depends on
who runs precisely when
 In our former example, the possibilities are
various

Concetps
 Mutual exclusion
 Prohibit more than one process from reading and
writing the shared data at the same time
 Critical region
 Part of the program where the shared memory is
accessed

Critical Regions (1)
Four conditions to provide mutual exclusion
1. No two processes simultaneously in critical region
2. No assumptions made about speeds or numbers of
CPUs
3. No process running outside its critical region may block
another process
4. No process must wait forever to enter its critical region

30General structure of a typical process Pi
do {
entry section
critical section
exit section
remainder section
} while (TRUE);
Critical Section Problem

Critical Regions (2)
Mutual exclusion using critical regions

Mutual Exclusion with Busy Waiting
 Disable interrupt
 After entering critical region, disable all interrupts
 Since clock is just an interrupt, no CPU
preemption can occur
 Disabling interrupt is useful for OS itself, but not
for users…

Mutual Exclusion with busy waiting
 Lock variable
 A software solution
 A single, shared variable (lock), before entering
critical region, programs test the variable, if 0, no
contest; if 1, the critical region is occupied
 What is the problem?
 An analogy: the notepad on the door…

Mutual Exclusion with Busy Waiting : strict
alternation
Proposed solution to critical region problem
(a) Process 0. (b) Process 1.

Concepts
 Busy waiting
 Continuously testing a variable until some value
appears
 Spin lock
 A lock using busy waiting is call a spin lock

Mutual Exclusion with Busy Waiting (2) : a
workable method
Peterson's solution for achieving mutual exclusion

Mutual Exclusion with Busy Waiting (3)
Entering and leaving a critical region using the
TSL instruction

Sleep and wakeup
 Drawback of Busy waiting
 A lower priority process has entered critical region
 A higher priority process comes and preempts the
lower priority process, it wastes CPU in busy
waiting, while the lower priority don’t come out
 Priority inversion/deadlock
 Block instead of busy waiting
 Wakeup sleep

Producer-consumer problem
 Two processes share a common, fixed-sized
buffer
 Producer puts information into the buffer
 Consumer takes information from buffer
 A simple solution

Sleep and Wakeup
Producer-consumer problem with fatal race condition

Producer-Consumer Problem
 What can be the problem?
 Signal missing
 Shared variable: counter
 Same old problem caused by concurrency
 When consumer read count with a 0 but didn’t fall
asleep in time, then the signal will be lost

Semaphore
 Proposed by Dijkstra, introducing a new type of
variable
 Atomic Action
 A single, indivisible action
 Down (P)
 Check a semaphore to see whether it’s 0, if so, sleep; else,
decrements the value and go on
 Up (v)
 Check the semaphore
 If processes are waiting on the semaphore, OS will chose
on to proceed, and complete its down
 Consider as a sign of number of resources

Semaphore
 Solve producer-consumer problem
 Full: counting the slots that are full; initial value
0
 Empty: counting the slots that are empty, initial
value N
 Mutex: prevent access the buffer at the same
time, initial value 0 (binary semaphore)
 Synchronization/mutual exclusion

Semaphores
The producer-consumer problem using semaphores

Mutexes
Implementation of mutex_lock and mutex_unlock

A problem
 What would happen if the downs in
producer’s code were reversed in order?

Figure 2-30. Some of the Pthreads calls relating to mutexes.
Mutexes in Pthreads (1)

Figure 2-31. Some of the Pthreads calls relating
to condition variables.

Figure 2-32. Using threads to solve
the producer-consumer problem.
. . .

Classic IPC Problems
 Dining philosopher problem
 A philosopher either eat or think
 If goes hungry, try to get up two forks and eat
 Reader Writer problem
 Models access to a database

Figure 2-44. Lunch time in the Philosophy Department.
Dining Philosophers Problem (1)

Figure 2-45. A nonsolution to the dining philosophers problem.

Figure 2-46. A solution to the dining philosophers problem.
. . .

. . .
. . .

. . .

Figure 2-47. A solution to the readers and writers problem.
The Readers and Writers Problem (1)
. . .

Figure 2-47. A solution to the readers and writers problem.
The Readers and Writers Problem (2)
. . .

Reader-Writer Problem
 What is the disadvantage of the solution?
 Writer faces the risk of starvation

scheduling
 Which process to run next?
 When a process is running, should CPU run
to its end, or switch between different jobs?
 Process switching is expensive
 Switch between user mode and kernel mode
 Current process must be saved
 Memory map must be saved
 Cache flushed and reloaded

Figure 2-38. Bursts of CPU usage alternate with periods of waiting
for I/O. (a) A CPU-bound process. (b) An I/O-bound process.
Scheduling – Process Behavior

Note
 When CPU gets faster, processes are getting
more I/O bounded
 A basic idea is if an I/O bound process wants
to run, it should get a change quickly

Concepts
 Preemptive algorithm
 If a process is still running at the end of its time
interval, it is suspended and another process is
picked up
 Nonpreemptive
 Picks a process to run and then lets it run till it
blocks or it voluntarily releases the CPU

Categories of Scheduling Algorithms
 Different environments need different
scheduling algorithms
 Batch
 Still in wide use in business world
 Non-preemptive algorithms reduces process switches
 Interactive
 Preemptive is necessary
 Real time
 Processes run quickly and block

Figure 2-39. Some goals of the scheduling algorithm under
different circumstances.
Scheduling Algorithm Goals

• First-come first-served
• Shortest job first
Scheduling in Batch Systems

 FCFS is advantageous for which kind of jobs?
FCFS
Process Arrive
time
Service
time
Start time Finish
time
Turnar
ound
Weighted
turnaroun
d
A 0 1 0 1 1 1
B 1 100 1 101 100 1
C 2 1 101 102 100 100
D 3 100 102 202 199 1.99

FCFS
 Disadvantage:
 One CPU-bound process runs for 1 sec at a time
 Many I/O bound processes that use little CPU
time but each has to perform 1000 disk reads

Figure 2-40. An example of shortest job first scheduling.
(a) Running four jobs in the original order. (b) Running them
in shortest job first order.
Shortest Job First

Shortest Job First
 Turnaround times: shortest job first is
provably optimal
 But only when all the jobs are available
simultaneously

 Compare:
 Average Turnaround time
 Short job
 Long job
Shortest job first
Process A B C D E average
Arrive time 0 1 2 3 4
Service Time 4 3 5 2 4
SJF Finish time 4 9 18 6 13
turnaround 4 8 16 3 9 8
weighted 1 2.67 3.1 1.5 2.25 2.1
FCFS finish 4 7 12 14 18
turnaround 4 6 10 11 14 9
weighted 1 2 2 5.5 3.5 2.8

• Round-robin scheduling
• Priority scheduling
• Multiple queues
• Shortest process next
• Guaranteed scheduling
• Lottery scheduling
• Fair-share scheduling
Scheduling in Interactive Systems

Figure 2-41. Round-robin scheduling.
(a) The list of runnable processes. (b) The list of runnable
processes after B uses up its quantum.
Round-Robin Scheduling

P4
 Arrival time = 0
 Time quantum =20
 The Gantt chart is
 Typically, higher average turnaround than SJF, but better
response
Example: RR with Time Quantum = 20
Process Burst Time
P1 53
P2 17
P3 68
p4 24
P1 P2 P3 P4 P1 P3 P1 P3 P3
0 20 3757 77 97117121134154162

Size of time quantum
 The performance of RR depends heavily on
the size of time quantum
 Time quantum
 Too big， = FCFS
 Too small:
 Hardware: Process sharing
 Software: context switch, high overhead, low CPU
utilization
 Must be large with respect to context switch

Context switch
 If the quantum is 4msec, and context switch
is 1msec, then 20% of CPU time is wasted
 If the quantum if 100msec, the wasted time is
1%, but less responsive
 A quantum around 20-50 msec is reasonable

Turnaround Time Varies With The Time Quantum
Process Time
P1
P2
P3
P4
6
3
1
7
 Will the average turnaround time improve
as q increase?
 80% CPU burst should be shorter than q
170 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
P1 P2 P3 P4 P4 P4 P4P1 P2 P4 P1 P2 P4 P1 P4 P1 P1
170 2 4 5 7 9 10 12 14 16
P1 P2 P3 P4 P1 P2 P4 P1 P4 P4
170 3 6 7 10 13 16
P1 P2 P3 P4 P1 P4 P4
170 4 7 8 12 14
P1 P2 P3 P4 P1 P4
170 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
P1 P2 P3 P4 P1 P4
170 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
170 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
P1 P2 P3 P4 P4
P1 P2 P3 P4
1 2 3 4 5 6 7
10.0
10.5
11.5
11.0
12.0
12.5
Averageturnaroundtime
Time quantum

Priority scheduling
 Each priority has a priority number
 The highest priority can be scheduled first
 If all priorities equal, then it is FCFS

Example
Process Burst Time Priority
P1 10 3
P2 1 1
P3 2 3
P4 1 4
P5 5 2
 E.g.:
 Priority (nonpreemprive)
 Average waiting time
= (6 + 0 + 16 + 18 + 1) /5 = 8.2
P12
0 16 191 6
3 4P5
18

Multiple Queues
 CTSS
 Only one process in memory
 It is wise to give large quantum to CPU-bound
process and small quantum to interactive process
 Priority classes
 Highest class run for one quantum; next-highest for two
quanta, and so on
 When a process used up its quantum, it will be moved to
the next class

Example of Multiple Queues
 Three queues:
 Q0 – time quantum 8 milliseconds, FCFS
 Q1 – time quantum 16 milliseconds, FCFS
 Q2 – FCFS

Multiple queues
 It is not good for process that firstly CPU-
bounded, but later interactive
 Whenever a carriage return was typed at the
terminal, the process belonging to the terminal
was moved to the highest priority class
 What happened?

Shortest Process Next
 In interactive systems, it is hard to predict the
remaining time of a process
 Make estimate based on past behavior and
run the shortest estimated running time
 Aging:
 Estimate next value in a series by taking the
weighted averaged of the current and previous
estimate
0 0 1 0 1 2, / 2 / 2, / 4 / 4 / 2....T T T T T T  

Priority inversion
 Priority inversion
 When the higher-priority process needs to read or
modify kernel data that are currently being
accessed by another, lower-priority process
 The high-priority process would be waiting for a
lower-priority one to finish

 E.g.:
 Priority: P1<PRT3<PRT2
 PRT3 preempt P1; PRT2 waits for P1;
 PRT2 waits for PRT3
P1 PRT2
PRT3
R1

Priority Inversion in Pathfinder
 The landing on Mars of Pathfinder was flawless
 But days later, Pathfinder began to experience
series of system resets, casing data loss
 VxWorks provides preemptive priority scheduling
of threads. Tasks on the Pathfinder spacecraft
were executed as threads with priorities that
were assigned in the usual manner reflecting the
relative urgency of these tasks.

 "information bus”
 a shared memory area used for passing information
between different components of the spacecraft.
 bus management task
 ran frequently with high priority to move certain kinds of
data in and out of the information bus. Access to the bus
was synchronized with mutual exclusion locks (mutexes).
 meteorological data gathering task ran as an
infrequent, low priority thread, used the information
bus to publish its data.
 a communications task that ran with medium priority.

 What would happen if the (medium priority)
communications task to be scheduled during
the short interval while the (high priority)
information bus thread was blocked waiting
for the (low priority) meteorological data
thread?
 A watchdog would notice that the information
bus thread hasn’t been executed for some
time; and would reset the system

Priority inversion (cont.)
 Solution
 Priority-inheritance (lending)
 PRT2 lends its priory to P1, thus PRT3 could not preempt P1
 Priority inheritance must be transitive
 E.g.:
 Priority: P1<PRT3<PRT2
P1
PRT2
PRT3
R1
R2

Priority Inversion
 Ceiling Protocol
 One way to solve priority inversion is to use the priority
ceiling protocol, which gives each shared resource a
predefined priority ceiling.
 When a task acquires a shared resource, the task is
hoisted (has its priority temporarily raised) to the
priority ceiling of that resource.
 The priority ceiling must be higher than the highest
priority of all tasks that can access the resource,
thereby ensuring that a task owning a shared resource
won't be preempted by any other task attempting to
access the same resource.
 When the hoisted task releases the resource, the task
is returned to its original priority level.

Exercises
 Compare reading a file using a single-
threaded file server and a multithreaded one.
 It takes 15 msec to get a request for work,
dispatch it, and do the rest of the necessary
processing, if the data are in the cache
 One-third of the time, it will need disk operation,
additional 75 msec is needed
 How many requests/sec can the server handle if it
is single threaded? If it is multithreaded?

Exercises
 Measurements of a certain system have shown
that the average process run for a T before
blocking on I/O. A process switch requires a time
of S. For round-robin scheduling with quantum
Q, give the CPU efficiency for each of the
following.
0
Q
Q T
S Q T
Q S
Q
 

 



Exercise
 Five batch jobs A through E, arrive at a
computer center at almost the same time, and
the estimated running time are 10,6,2,4,and 8
minutes, with priorities 3,5,2,1,4, 5 being the
highest. Computer the average turnaround time
of the following algorithms.
 Round robin
 Priority scheduling
 FCFS
 Shortest job first

Exercise
 The aging algorithm with a=1/2 is being used
to predict run times. The previous four runs,
from oldest to most recent, are 40, 20,40 and
15 msec. What is the prediction of next time?

Exercise
 A process running on CTSS needs 30 quanta
to complete. How many times must it be
swapped in?

Processes, Threads and Scheduler

More Related Content

What's hot (20)

Similar to Processes, Threads and Scheduler (20)

More from Munazza-Mah-Jabeen (20)

Recently uploaded (20)

Processes, Threads and Scheduler