final Production

Engr. Roderick L. Calaguio
Presenter/Discussant
MME Student
ME 201 Strategic Management of an
Engineering Enterprise
PRODUCTION & OPERATION
MANAGEMENT

Introduction
Production/operations management is the process, which combines
and transforms various resources used in the production/operations
subsystem of the organization into value added product/services in a
controlled manner as per the policies of the organization. Therefore, it is
that part of an organization, which is concerned with the
transformation of a range of inputs into the required
(products/services) having the requisite quality level.
The set of interrelated management activities, which are involved
in manufacturing certain products, is called as production management. If
the same concept is extended to services management, then the
corresponding set of management activities is called as operations
management.

Concept of Production
Production is defined as “the step-by-step conversion of one
form of material into another form through chemical or mechanical
process to create or enhance the utility of the product to the user.” Thus
production is a value addition process. At each stage of processing, there
will be value addition.
Edwood Buffa defines production as ‘a process by which goods
and services are created’.
Some examples of production are: manufacturing custom-made
products like, boilers with a specific capacity, constructing flats, some
structural fabrication works for selected customers, etc., and
manufacturing standardized products like, car, bus, motor cycle, radio,
television, etc.

Inputs:
• Men
• Materials
• Machines
• Information
• Capital
Transformation Process:
• Product Design
• Product Planning
• Production Control
• Maintenance
Outputs:
• Product
• Services
Continuous:
• Inventory
• Quality
• Cost
Environment Feedback Information
Fig. 1.1 Schematic Production Systemwww.newagepublisher.com

Production System
The production system of an organization is that part, which produces
products of an organization. It is that activity whereby resources, flowing
within a defined system, are combined and transformed in a controlled manner
to add value in accordance with the policies communicated by management. A
simplified production system is shown above.
The production system has the following characteristics:
1. Production is an organized activity, so every production system has
an objective.
2. The system transforms the various inputs to useful outputs.
3. It does not operate in isolation from the other organization system.
4. There exists a feedback about the activities, which is essential to
control and improve system performance.

Production systems can be classified as Job Shop, Batch, Mass and Continuous
Production systems.
Production/OperationsVolume
Output / Product Variety
Continuous
Production
Mass Production
Batch
Production
Job-Shop
Production
Fig. 1.2 Classification of Production Systems
www.newagepublisher.com

Job Shop Production
Job shop production are characterised by manufacturing of one or few
quantity of products designed and produced as per the specification of customers
within prefixed time and cost. The distinguishing feature of this is low volume
and high variety of products.
Characteristics
The Job-shop production system is followed when there is:
1. High variety of products and low volume.
2. Use of general purpose machines and facilities.
3. Highly skilled operators who can take up each job as a challenge
because of uniqueness.
4. Large inventory of materials, tools, parts.
5. Detailed planning is essential for sequencing the requirements of
each product, capacities for each work centre and order priorities.

Limitations
Following are the limitations of job shop production:
1. Higher cost due to frequent set up changes.
2. Higher level of inventory at all levels and hence higher inventory
cost.
3. Production planning is complicated.
4. Larger space requirements.
Advantages
Following are the advantages of job shop production:
1. Because of general purpose machines and facilities variety of
products can be produced.
2. Operators will become more skilled and competent, as each job
gives them learning opportunities.
3. Full potential of operators can be utilised.
4. Opportunity exists for creative methods and innovative ideas.

Batch Production
Batch production is defined by American Production and Inventory
Control Society (APICS) “as a form of manufacturing in which the job passes
through the functional departments in lots or batches and each lot may have a
different routing.” It is characterised by the manufacture of limited number of
products produced at regular intervals and stocked awaiting sales.
Characteristics
Batch production system is used under the following circumstances:
1. When there is shorter production runs.
2. When plant and machinery are flexible.
3. When plant and machinery set up is used for the production of item
in a batch and change of set up is required for processing the next
batch.
4. When manufacturing lead time and cost are lower as compared to
job order production.

Limitations
Following are the limitations of batch production:
1. Material handling is complex because of irregular and longer
flows.
2. Production planning and control is complex.
3.Work in process inventory is higher compared to continuous
production.
4. Higher set up costs due to frequent changes in set up.
Advantages
Following are the advantages of batch production:
1. Better utilisation of plant and machinery.
2. Promotes functional specialisation.
3. Cost per unit is lower as compared to job order production.
4. Lower investment in plant and machinery.
5. Flexibility to accommodate and process number of products.
6. Job satisfaction exists for operators.

Mass Production
Manufacture of discrete parts or assemblies using a continuous process
are called mass production. This production system is justified by very large
volume of production. The machines are arranged in a line or product layout.
Product and process standardisation exists and all outputs follow the same path.
Characteristics
Mass production is used under the following circumstances:
1. Standardisation of product and process sequence.
2. Dedicated special purpose machines having higher production
capacities and output rates.
3. Large volume of products.
4. Shorter cycle time of production.
5. Lower in process inventory.
6. Perfectly balanced production lines.
7. Flow of materials, components and parts is continuous and without
any back tracking.
8. Production planning and control is easy.
9. Material handling can be completely automatic.

Limitations
Following are the limitations of mass production:
1. Breakdown of one machine will stop an entire production line.
2. Line layout needs major change with the changes in the product
design.
3. High investment in production facilities.
4. The cycle time is determined by the slowest operation.
Advantages
Following are the advantages of mass production:
1. Higher rate of production with reduced cycle time.
2. Higher capacity utilisation due to line balancing.
3. Less skilled operators are required.
4. Low process inventory.
5. Manufacturing cost per unit is low.

Continuous Production
Production facilities are arranged as per the sequence of production
operations from the first operations to the finished product. The items are made
to flow through the sequence of operations through material handling devices
such as conveyors, transfer devices, etc.
Characteristics
Continuous production is used under the following circumstances:
1. Dedicated plant and equipment with zero flexibility.
2. Material handling is fully automated.
3. Process follows a predetermined sequence of operations.
4. Component materials cannot be readily identified with final
product.
5. Planning and scheduling is a routine action.

Limitations
Following are the limitations of continuous production:
1. Flexibility to accommodate and process number of products does
not exist.
2. Very high investment for setting flow lines.
3. Product differentiation is limited.
Advantages
Following are the advantages of continuous production:
1. Standardisation of product and process sequence.
2. Higher rate of production with reduced cycle time.
3. Higher capacity utilisation due to line balancing.
4. Manpower is not required for material handling as it is completely
automatic.
5. Person with limited skills can be used on the production line.
6. Unit cost is lower due to high volume of production.

Production Management
E.S. Buffa defines production management as, “Production
management deals with decision making related to production processes so that
the resulting goods or services are produced according to specifications, in the
amount and by the schedule demanded and out of minimum cost.”
Objectives of Production Management
The objective of the production management is ‘to produce goods
services of right quality and quantity at the right time and right manufacturing
cost’.
1. Right Quality
2. Right Quantity
3. Right Time
4. Right Manufacturing Cost

Operating System
Operating system converts inputs in order to provide outputs which are
required by a customer. It converts physical resources into outputs, the
function of which is to satisfy customer wants i.e., to provide some utility
for the customer. In some of the organization the product is a physical
good (hotels) while in others it is a service (hospitals). Bus and taxi
services, tailors, hospital and builders are the examples of an operating
system.
Everett E. Adam & Ronald J. Ebert define operating system as,
“An operating system ( function) of an organization is the part of an
organization that produces the organization’s physical goods and
services.”
Ray Wild defines operating system as, “An operating system is a
configuration of resources combined for the provision of goods or
services.”

Concept of Operations
An operation is defined in terms of the mission it serves for the
organization, technology it employs and the human and managerial processes
it involves. Operations in an organization can be categorised into
manufacturing operations and service operations. Manufacturing operations
is a conversion process that includes manufacturing yields a tangible output:
a product, whereas, a conversion process that includes service yields an
intangible output: a deed, a performance, an effort.
Distribution between Manufacturing Operations and Service
Operations
Following characteristics can be considered for distinguishing
manufacturing operations with service operations:
1. Tangible/Intangible nature of output
2. Consumption of output
3. Nature of work (job)
4. Degree of customer contact
5. Customer participation in conversion
6. Measurement of performance.

Manufacturing is characterised by tangible
outputs (products), outputs that customers consume
overtime, jobs that use less labour and more equipment,
little customer contact, no customer participation in the
conversion process (in production), and sophisticated
methods for measuring production activities and
resource consumption as product are made.

Principal
Function
Principal customer wants
Primary Considerations Other Considerations
Manufacture Goods of a given,
requested or acceptable
specification
Cost, i.e., purchase price
or cost of obtaining goods.
Timing, i.e., delivery
delay from order or
request to receipt of
goods.
Transport Management of a given,
specification
Cost, i.e., cost of
movements. Timing, i.e.,
1. Duration or time to
move.
2. Wait or delay from
requesting to its
commencement.
TABLE 1.2 Aspects of customer service

Principal
Function
Principal customer wants
Primary Considerations Other Considerations
Supply Goods of a given,
specification
Cost, i.e., purchase price
or cost of obtaining goods.
Timing, i.e., delivery
delay from order or
request to receipt of
goods.
Service Treatment of a given,
specification
Cost, i.e., cost of
movements. Timing, i.e.,
1. Duration or time
required for treatment
2. Wait or delay from
requesting treatment
to its commencement.

The customer service objective.
To provide agreed/adequate
levels of customer service (and
hence customer satisfaction) by
providing goods or services with
the right specification, at the
right cost and at the right time.
The resource utilisation
objective.
To achieve adequate levels of
resource utilisation (or
productivity) e.g., to achieve
agreed levels of utilisation of
materials, machines and labour.
TABLE 1.3 The twin objectives of operations management

Duties and responsibilities of Operation
Management
Production and operations management concern with the conversion of
inputs into outputs, using physical resources, so as to provide the desired
utilities to the customer while meeting the other organizational objectives of
effectiveness, efficiency and adoptability. It distinguishes itself from other
functions such as personnel, marketing, finance, etc., by its primary concern
for ‘conversion by using physical resources.’ Following are the activities
which are listed under production and operations management functions:
1. Location of facilities
2. Plant layouts and material handling
3. Product design
4. Process design
5. Production and planning control
6. Quality control
7. Materials management ( purchasing, store keeping and inventory
Mgt)
8. Maintenance management.
9 Human Resource and job design

LOCATION OF FACILITIES
Location of facilities for operations is a long-term capacity decision which
involves a long term commitment about the geographically static factors that
affect a business organization. It is an important strategic level decision-
making for an organization. It deals with the questions such as ‘where our
main operations should be based?’

PLANT LAYOUT AND MATERIAL HANDLING
Plant layout refers to the physical arrangement of facilities. It is the
configuration of departments, work centres and equipment in the conversion
process. The overall objective of the plant layout is to design a physical
arrangement that meets the required output quality and quantity most
economically.
According to James Moore, “Plant layout is a plan of an optimum
arrangement of facilities including personnel, operating equipment, storage
space, material handling equipments and all other supporting services along
with the design of best structure to contain all these facilities”.
‘Material Handling’ refers to the ‘moving of materials from the store
room to the machine and from one machine to the next during the process of
manufacture’. It is also defined as the ‘art and science of moving, packing and
storing of products in any form’. It is a specialised activity for a modern
manufacturing concern, with 50 to 75% of the cost of production.

PRODUCT DESIGN
Product design deals with conversion of ideas into reality. Every business
organization have to design, develop and introduce new products as a survival
and growth strategy. Developing the new products and launching them in the
market is the biggest challenge faced by the organizations.
PROCESS DESIGN
Process design is a macroscopic decision-making of an overall process route
for converting the raw material into finished goods. These decisions
encompass the selection of a process, choice of technology, process flow
analysis and layout of the facilities.

PRODUCTION PLANNING AND CONTROL
Production planning and control can be defined as the process of planning the
production in advance, setting the exact route of each item, fixing the starting
and finishing dates for each item, to give production orders to shops and to
follow up the progress of products according to orders.
Planning is deciding in advance what to do, how to do it, when to do
it and who is to do it. Planning bridges the gap from where we are, to where
we want to go.
Routing may be defined as the selection of path which each part of
the product will follow, which being transformed from raw material to
finished products.
Scheduling determines the programme for the operations.
Scheduling may be defined as ‘the fixation of time and date for each
operation’ as well as it determines the sequence of operations to be followed.

Production/
Operations
Management
Location
Of
Facilities Plant Layout
&
Material
Handling
Product
Design
Process
Design
Production
Planning and
Control
Quality
Control
Material
Management
Maintenance
Management
Fig. 1.4 Scope of
Production and
Operations
Management
www.newagepublisher.com

Dispatching is concerned with the starting
the processes. It gives necessary authority so as to
start a particular work, which has already been
planned under ‘Routing’ and ‘Scheduling’.

QUALITY CONTROL
Quality Control (QC) may be defined as ‘a system that is used to maintain a
desired level of quality in a product or service’. It is a systematic control of
various factors that affect the quality of the product. Quality control aims at
prevention of defects at the source, relies on effective feed back system and
corrective action procedure.
Quality control can also be defined as ‘that industrial management
technique by means of which product of uniform acceptable quality is
manufactured’. It is the entire collection of activities which ensures that the
operation will produce the optimum quality products at minimum cost.

• To improve the companies income by making the production more
acceptable to the customers i.e., by providing long life, greater usefulness,
maintainability, etc.
• To reduce companies cost through reduction of losses due to defects.
• To achieve interchangeability of manufacture in large scale production.
• To produce optimal quality at reduced price.
• To ensure satisfaction of customers with productions or services or high
quality level, to build customer goodwill, confidence and reputation of
manufacturer.
• To make inspection prompt to ensure quality control.
• To check the variation during manufacturing.
The main objectives of quality control are:

MATERIAL MANAGEMENT
Materials management is that aspect of management function which is
primarily concerned with the acquisition, control and use of materials needed
and flow of goods and services connected with the production process having
some predetermined objectives in view.
The main objectives of materials management are:
• To minimise material cost.
• To purchase, receive, transport and store materials efficiently and to
reduce the related cost.
• To cut down costs through simplification, standardisation, value analysis,
import substitution, etc.
• To trace new sources of supply and to develop cordial relations with them
in order to ensure continuous supply at reasonable rates.
• To reduce investment tied in the inventories for use in other productive
purposes and to develop high inventory turnover ratios.

MAINTENANCE MANAGEMENT
In modern industry, equipment and machinery are a very important part of the
total productive effort. Therefore, their idleness or downtime becomes are
very expensive. Hence, it is very important that the plant machinery should be
properly maintained.
The main objectives of maintenance management are:
1. To achieve minimum breakdown and to keep the plant in good
working condition at the lowest possible cost.
2. To keep the machines and other facilities in such a condition that
permits them to be used at their optimal capacity without
interruption.
3. To ensure the availability of the machines, buildings and services
required by other sections of the factory for the performance of their
functions at optimal return on investment.

Reference:
 www.newagepublisher.com

final Production

More Related Content

What's hot (20)

Viewers also liked (12)

Similar to final Production (20)

More from Vikash Kumar Bibhakar (20)

Recently uploaded (20)

final Production