Program DevelopmentPeer-RevieweiHazMateraK ^enc .docx

Program Development
Peer-Reviewei
HazMat
era
K ^
enc es
Decontamination & Victim Chain of Survival
By Scott Gunderson, Cameron Helikson & Michael Heffner
Consider the following hypothetical sce-narios of workplace
emergency decon-tamination incidents involving hazardous
materials:
B R I E F
•HazMat emergencies represent a sig-
nificant response challenge, especially
when employees are exposed and the
response involves a victim. í
•A growing body of literature and I
standards guides emergency medical -
services (EMS) and hospital profes-
sionals in HazMat victim response and
treatment. But, the SH&E professional
must navigate separate standards:
HazWOPER for HazMat emergencies
and standard first aid for HazMat victim
response.
»What strengths each standard may
have in isolation are lacking when [

coupled with each other or as explicit '
preparation for the more advanced re-
sponse that follows when EMS arrives.
•The authors review these standards
and integrate several key concepts for
effective response to HazMat victim
emergencies in the workplace to make
the most of the critical time hetween
employee exposure and EMS arrival.
A pressurized hose recir-
culating potassium goid
cyanide into a clean room
eiectroplating bath breaks
ioose from the ciamps hold-
ing it against the bath wall.
The hose whips around
and sprays the corrosive
iiquid onto a nearby em-
pioyee. She hits the emer-
gency "off" button, and as
the chaos quiets, she and
her coworkers realize she is
standing in a puddie of plat-
ing solution, with the liquid
dripping from her clean-
room clothing. Her first im-
pulse is to go change her
clothes in the locker room,
but her supervisor orders
her to an enclosed emer-
gency shower stail with a
drain. She walks from the
puddle to the shower, trail-
ing a path of wet footprints.

At another company, an
employee ioses his hold
of a heavy product and
drops it into an acid etching tank. The fuii-
front apron, gloves, face shield and goggles
protect him from the splashing acid. But, his
coworker who has his back turned feeis the
acid spiash on his back, buttocks and legs at
the gaps between his apron ties. He pulls the
handle of the emergency shower, an open unit
against the wall, and removes his clothing as
acid and rinse water cascade across the floor.
Workplace HazMat emergency response is
well-defined in standards and regulations such as
HazWOPER, and workplace medical emergency
response is equally well-defined in practices such
as first aid. However, combining the two is com-
plicated because the urgency of first-aid response
tends to collide with the systematic and planned
sequences of HazWOPER. This article addresses
issues around HazMat emergencies with em-
ployee exposure, and focuses on safe and effecfive
emergency decontamination of HazMat victims
in occupational settings such as manufacturing,
warehousing and laboratories (see "Maximizing
HazMat Victim Care").
The authors have excluded transportation emer-
gencies, nonoccupational exposures, and criminal,
combat or terrorism events due to the broad nature
of these subjects and their integration with issues
such as traffic control, security and tactical opera-
tions. Transportation involves potential exposure
to the nonoccupational general public, and in the

case of highway incidents, the absence of read-
ily available emergency decontamination facili-
IScott Gunderson, CSP, CHMM, is asafet}' compliance officer
at Oregon OSHA,with prior workplace emergency response
experience in various industries including
semiconductor manufacturing and chemical
processing. He has published articles in
Professional Safety, Systems Engineering and
Journal of System Safety. Gunderson holds a
B.A. from Western Oregon University and
an M.A. and an M.Eng. from Portland State
University. He is an Oregon emergency
medical technician (EMT), an American
Heart Association Basic Life Support
instructor and a professional member of
ASSE's Columbia-Willamette Chapter.
eron Helikson is the environment,
health and safety (EHS) manager at Tosoh
Quartz Inc. in Portland, OR. He has been
in EHS for 14 years and has specialized in
developing emergency response teams and
in using technology in EHS. Helikson is an
Oregon-licensed EMT-Intermediate and
has been a volunteer with the Newberg Fire
Department for 19 years. He is an American
Heart Association BLS instructor and is a
certified in HazMat technician (40-hour),
advanced cardiac life support, advanced
medical life support and prehospital trauma
life support. He holds a B.S. in Business
from Portland State Universit)', and has
been published in Professional Safety. He-
likson is a professional member of ASSE's

Columbia-Willamette Chapter.
Michael Heffner, B.S., EMT-P, is a captain
with the Cit)- of Salem Fire Department
where he is assigned to one of Oregon's
13 regional HazMat response teams. He is
an Oregon-licensed paramedic and a certi-
fied HazMat technician. Heffner teaches
emergency medical care, HazMat response
and hospital first receiver classes throughout
Oregon. He holds a B.S. from Portland State
University and Eastern Oregon University.
4 0 ProfessionalSafety MARCH 2014 www.asse.org
fies such as emergency showers. Addifionally, law
enforcement, military or other potential mass ca-
sualty emergencies, such as terrorist attacks with
chemical weapons, involve even more issues, such
as significant public exposure, potentially long pe-
riods wifh unidenfified contaminants and ongoing
tactical threats (e.g., acfive shoofer and secondary
explosives timed for arrival of emergency respond-
ers).
Magnitude of Problem
Agency for Toxic Substances and Disease Reg-
isfry (ATSDR, 2009) surveyed data from 13 sfafes
in the firsf half of 2009, cataloging 3,458 HazMat
emergencies. These emergencies involved 1,050
victims, of whom 44 died. Of these emergencies,
68% were in fixed facilities, with manufacturing
representing the highest number (27%). Of the vic-

tims, 91% were in fixed facilities, with employees
representing the highest number of victims (44%).
In the second half of 2009, six states reported
1,352 HazMat emergencies wdth 319 victims and
8 fatalities. Like the first half of the year, fixed fa-
cilities and manufacturing represenfed the highest
(99% and 27%, respectively). These fixed facili-
ties again reported the highest number of victims
(83%), with employees representing 10% (ATSDR,
2009).
mediately reducing contamination of individuals in
potentially life-threafening situafions with or with-
out the formal establishment of a decontamination
corridor" (NFPA, 2008b). This is what workplace
emergency responders perform when they assist
an employee in an emergency shower until emer-
gency medical service (EMS) personnel arrive, and
it is the primary focus of this article.
2) Gross decontamination. This may be an ini-
tial part of emergency decontamination of victims,
or the first step in technical deconfaminafion of re-
sponders exifing the hot zone through a supervised
decontamination corridor. In both cases, as high a
percentage as feasible of contaminafion is rinsed
off prior fo further deconfaminafion.
3) Mass decontamination. "The physical pro-
cess of reducing or removing surface contaminants
from large numbers of vicfims in pofentially life-
threatening situations in the fastest time possible"
(NFPA, 2008b). This may be an emergency decon-
tamination or a gross decontamination, and simply
describes the fact that more than one person un-

dergoes decontamination. Although typically per-
formed by FMS personnel, the authors are aware
of two separate workplace incidents with two ex-
posed employees each, forcing fhem to each walk
to separate emergency showers; in one incident.
HazMat Victim
Decontamination
D e c o n t a m i n a t i o n
practices have evolved
since the NFPA 472
standard was created
and replaced NFPA
471, which spent much
of its decontaminafion
section on standard-
ized procedures for
controlled entry and
exit through an estab-
lished corridor linking
the operational areas
of the hot zone (e.g.,
exclusion or contami-
nation area), warm
zone (e.g., transition
or contamination re-
ducfion area) and cold
zone (e.g., support or
clean area). Although
this separation of op-
erational areas is ideal
in principal, NFPA
472 acknowledges the
more realistic pofenfial
for chaos as emergency

responders arrive, with
five categories of de-
contaminafion.
1) Emergency de-
contamination. "The
physical process of im-
rMaximizing HazMat Victim CareTransitioning From
Workplace Emergency Responders to Emergency Medical
Services
SH&E professionals can do much to establish
safe and effective HazMat victim response and
strong links in the response chain between
workplace responders and emergency medical
services (EMS). Prevention remains the best
sfrafegy, and design for safety and training for
safe operafion is paramount, but a solid emer-
gency response program should at a minimum
include the following:
•Hardware. Functioning and appropri-
ately located emergency eyewash and shower
systems, PPE for employees and workplace
responders, first-aid supplies and response
supplies such as absorbents on reserve and
dedicated for emergency-only use. All hard-
ware must be inspected regularly, maintained
and tested periodically.
•Information. Safet)' data sheets and a site-
specific emergency response plan at a minimum,
ideally including HazMat-specific procedures for
highly hazardous maferials such as hydrofiuoric
acid fhat require rapid response.

•Internal communications. HazMaf victims
must be able fo summon assistance and work-
place responders musf be able fo gather feam
members. Depending on operafion size and
complexity, internal communications can be as
simple as verbally shouting across the room,
using handheld radios or public address sys-
tems, or emergency shower fiow alarms con-
nected to central alarm systems with security
personnel on staff able fo monitor and notify
workplace responders.
•External communications. Typically 9-1-1
in fhe U.S. If sife telephones require dialing a
special number for an outside line, then this
musf be included in employee training. Caller
identification may or may nof be present at
the 9-1-1 call center, and the physical address
must be either known by employees or posted
in visible locations in the workplace so thaf it
can be communicated fo the dispatcher.
•Coordinating with EMS upon arrival. Work-
place emergency responders must greet EMS
upon arrival, direct fhem to the specific loca-
fion of fhe emergency and rapidly provide
accurate informafion about the emergency.
Emergency locations may be far removed from
typical entry points such as front gates, front
doors or shipping bays. Addifionally, fire and
ambulance services may arrive separately, and
fhe greef-direcf-communicafe sequence may
need fo be repeafed.
•Training. Workplace emergency responders

musf know fhese procedures, fhe proper use
of their resources and effective communica-
tion to EMS during an emergency. Workplace
emergency responders must also understand
the role of EMS and how workplace respond-
ers and EMS can best work together on site.
www.asse.org MARCH 2014 ProfessionalSafety 4 1
rTable 1HazMat Emergency & Victim
Decontamination Responsibilities
Personnel
Workplace emergency
responders
Emergency medical
services (EMS)
personnel
Hospital personnel
Role
Initial response; notify EMS;
emergency decontamination
Arrive at scene; assume control of
response; emergency, mass, gross
and/or technical decontamination;
emergency medical treatment;
transport victim(s)
Receive victim(s); definitive
decontamination and treatment
Expected levels of contamination
High, both scene and victim(s)

High, transitioning to as IOVÍÍ as
possible for victim(s)
Low, with exception of self-
transported "walking wounded";
emergency and technical
decontamination capabilities but
preference for receipt of
decontaminated victim(s)
the spill size in the facility was doubled with drops
and wet footprints from the emergency scene to
the two showers.
4) Technical decontamination. This may de-
scribe either the controlled decontamination of
responders leaving through the decontamination
corridor (NFPA, 2008a), ot thorough decontami-
nation of HazMat victims for emergency medical
treatment on site and/or prior to releasing for frans-
portation and further treatment (NFPA, 2008b).
Technical decontamination of HazMat victims
typically involves significantly more surface rins-
ing than occurs in a workplace emergency shower,
and may involve use of brushes, cleaning agents
rTable 2Summary of NFPA 473 Patient Priority Levels'
Contamination level
Heavy contamination;
highly toxic substance
Heavy contamination;
low-toxicity substance
Low contamination;
highly toxic substance
Low contamination;
low-toxicity substance

Medically critical
Combined priorities
• ^ d i c a l care first
Combined priorities
Medical care first
Medically unstable
Decontaminate first
Combined priorities
Decontaminate first
Medical care first
Medically stable
Decontaminate first
Combined priorities
Decontaminate first
Combined priorities
JVofe. "Summary of NFPA 473 patient priority levels for
immediate decontamination, immediate medical care or
combined priorities. Medically critical is defined as
compromised airway, serious shock, cardiac arrest and/or life-
threatening trauma or bums. Medically unstable is defined as
shortness of breath, unstable vital signs, altered lev-
els of consciousness and/or significant trauma or burns.
Medically stable /s defined as stable vital signs, no altered

level of consciousness and/or no significant trauma or burns.
Adapted f-om Table A.5.4.2, NFPA 473, Standard for
Competencies for EMS Personnel Responding to Hazardous
Materials/Weapons of Mass Destruction Incidents, by
NFPA, 2008, Quincy, MA: NFPA.
such as soaps and detergents,
and, depending on the proto-
cols of the responding agency,
irrigation and/or suction of na-
sal and oral cavities as needed.
The transition from emergency
decontamination of HazMat
victims by workplace emer-
gency responders to techni-
cal decontamination by EMS
personnel is discussed in more
detail.
5) Definitive decontami-
nation. This is performed in
the hospital as part of treat-
ment, and it is outside the
scope of this article, as well as
outside the scope of NFPA 472
and NFPA 473.
Table 1 summarizes typical
roles, responsibilities and ex-
pectations for each level of decontamination from
workplace emergency responders to EMS person-
nel and, finally, to hospital personnel.

HazMat Victim Care
The following sections describe HazMat vic-
tim care in reverse chronological order to provide
context for the final section on emergency decon-
tamination by workplace emergency responders.
The authors believe that workplace emergency
responders perform better if they understand the
expectations and actions of the higher-level re-
sponders with whom they will interact.
Hospital
Definitive treat-
ment varies with
the severity of ex-
posure, the hazard
of fhe substance,
positive idenfifi-
caüon of the sub-
stance and the
treating physician's
diagnosis. Whether
simple observation
and evaluation, or
more advanced de-
contamination and
treatment, it wiU
most likely occur in
the hospital (Cur-
rance, Clements &
Bronstien, 2007).
EMS operating un-
der written pres-
tanding orders and
medical direction

typically include
f Table 3Transition Issues Between Workplace
Emergency Responders & EMS
physician review of victims
as a standard conclusion in
their protocols for HazMat
exposures. It is rare for a
HazMat victim emergency to
end with EMS personnel not
transporting the victim for
further evaluation and care.
One critical issue for the
hospital is secondary con-
tamination, which occurs
when hospital personnel,
other patients and prop-
erty are exposed to hazard-
ous materials due to improper decontamination
of victims transported to the facility. Where EMS
personnel are designated as first responders with
high levels of HazMat response training, hospital
personnel are typically designated as first receivers,
potentially with less training in emergency decon-
tamination, due to the assumption that EMS per-
sonnel will perform proper decontamination prior
to transportation (OSHA, 2005; 2008b).
Strong communication between EMS and hospi-
tal personnel, as well as good technical decontami-
nation practices in the field, can prevent secondary
contamination (Horton, Berkowitz & Kaye, 2003).

NFPA 473 strongly emphasizes HazMat victim de-
contamination as soon as possible and certainly
prior to transportation: "It is unwise to accept a
contaminated patient into a transport unit or to be
unsure of the level of decontamination performed.
A poor decision in the field can have significant
ramifications at the door of the hospital" (Trebi-
sacci, 2008, p. 485).
Emergency Medical Services
Horrific case studies of ambulance contamina-
tion following a fatal exposure to hydrofluoric acid
and an emergency department shutdown follow-
ing the arrival of a pesticide-contaminated patient
illustrate the reasons why healthcare professionals
emphasize early and thorough victim decontami-
nation (Vogt & Sorensen, 2002). Contamination to
personnel and hardware is a real threat to everyone
in the emergency response chain; this threat is key
to EMS personnel balancing responder safety and
victim care.
NFPA 472 and 473, as well as other sources,
give priority to EMS personnel safety (NAEMT
& American College of Surgeons Committee on
Trauma, 2007; OSHA, 2009). EMS personnel per-
form an initial scene size-up on arrival for their
own safety and to prevent increasing the mag-
nitude of the emergency by having responders
become additional victims. The actions and com-
munications of workplace emergency responders
before and during EMS arrival can either facilitate
a smooth transition or cause delays as EMS per-
sonnel review the scene for their own protection.

Barriers
Competency of workplace emergency
responders
Understanding by workplace emergency
responders of EMS procedures
EMS familiarity of site and trust in
workplace emergency responder
competency
Delayed or incomplete scene size-up by
EMS upon arrival
Delayed or incomplete first impression
by EMS of HAZMAT victim upon arrival
Solution
s
Effective training
Effective training, emergency preplanning meetings with EMS,
joint exercises with EMS
Site tours, emergency preplanning with site representatives,
joint exercises with workplace emergency responders,
workplace emergency responders provide site emergency
response procedures and other information (e.g., floor plans,
SDS, etc.) to EMS upon arrival
Workplace emergency responders mark safe vs. hazardous

areas prior to EMS arrival
Workplace emergency responders have critical information
ready for transfer to EMS prior to EMS arrival (e.g., incident
summary, SDS, time HazMat victim in emergency shower, etc.)
Photo 1 : Mass decontamina-
tion. EMS responders have
erected an inflatable mass
decontamination tent to
process victims through
tv/o separate corridors, one
for male and one for female
victims, who will place
their clothing and personal
belongings in plastic bags for
tracking and further testing.
Photo 2: Technical decon-
tamination of EMS respond-
er. EMS responders render
their PPE safe by system-
atically rinsing, washing and
re-rinsing with soap and
water in the warm zone of a
decontamination corridor.

www.asse.org MARCH 2014 ProfessionalSaiety 4 3
f Table 4Standards Related to HazMat
Emergencies & HazMat Victim Response
Standard
Hazard Communication
OSHA 1910.1200
Emergency Action Plan
OSHA 1910.38
Medical and First Aid
OSHA 1910.151
Hazardous Waste Operations
and Emergency Response
OSHA 1910.120
Contingency Plan and
Emergency Procedures
EPA 265 Subpart D
NFPA471

NFPA472
NFPA 473
Target audience
All workplace employees
All workplace employees
Workplace emergency
responders
Workplace emergency
responders
Workplace emergency
responders
Workplace and public
emergency responders
Emergency medical service
(EMS) personnel
Summary
Basic training requirements on safe use as

well as emergency response to hazardous
materials in the workplace
Basic emergency requirements (e.g.,
notification, evacuation)
Requirements for first-aid supplies, first-aid
training and emergency eyewash/showers
(see also ASTM 2009 and ANSI 2009)
Detailed requirements for HazMat
emergency response, including long-term
cleanup of contaminated sites
Detailed requirements specific to hazardous
waste, including documentation of plans and
advanced communications with local
authorities (e.g., fire, EMS)
Withdrawn (see NFPA 472 and NFPA 473)
Competencies for HazMat emergency
responders
Competencies for EMS personnel responding
to HazMat incidents, with emphasis on
HazMat victim care at emergency site and
during transportation to hospital
Photo 3: Technical de-

contamination of victim
(training exercise
with manikin). EiVIS
responders have re-
moved and contained
the victim's clothing
and jewelry to signifi-
cantly reduce external
contamination. Next,
EMS responders will
systematically rinse,
wash and re-rinse both

the front and back
side of a victim before
preparing him/her for
ambulance transport to
the appropriate receiv-
ing hospital.
Photo 4: Definitive de-
contamination of victim
(training exercise with
manikin). Hospital first
receivers in Level C
PPE provide definitive
decontamination of a

HazMat victim before
admission into the
facility to avoid sec-
ondary contamination
of hospital personnel,
other patients and
equipment.
The authors have witnessed
EMS personnel refuse to en-
ter HazMat emergenq? scenes
because they were not con-
fident about the accuracy of
information from workplace
emergency responders, result-
ing in delayed medical care to

HazMat victims.
Once confident that they
can safely respond, EMS per-
sonnel will assume control
of the scene for entry and re-
sponse, including victim care.
For HazMat victim emergen-
cies. Table 2 (p. 42) summariz-
es the priorities for immediate
decontamination, immedi-
ate medical care or combined
priorities.
Workplace emergency re-
sponders can either facilitate
or delay EMS response. The
authors believe that early at-
tention to proper emergency
decontamination and accurate information will
permit EMS personnel to more quickly begin med-
ical care for victims. Additionally, preplanning, in-
cluding tours and training drills, between site and
EMS representatives can improve EMS knowledge

of the site, its hazards and the capabilities of the
workplace responders. This builds working re-
lationships, and improves communications and
efficiency during the critical transition between
workplace responder and EMS control of emer-
gency operations (Table 3, p. 43).
Workplace Emergency Response
The HazWOPER standard is the cornerstone
of most workplace HazMat emergency response
plans (OSHA, 2008a). The advanced planning
and education of employees required by this stan-
dard contributes to emergency prevention and
response, and it is the knowledge of facility em-
ployees who work with hazardous materials that
can help prevent secondary contamination in the
EMS and hospital systems (Berkowitz, Horton &
Kaye, 2004). Wliile the HazWOPER standard thor-
oughly covers HazMat scene safety and directs
attenfion to issues such as spill response and re-
covery, its coverage of emergency decontamination
and HazMat victim care is limited, even though the
standard contains provisions that require planning
for medical monitoring and first aid.

Where HazWOPER lacks specifics on emer-
gency decontamination and HazMat victim care,
standard first aid and other emergency decontami-
nation references provide few details on these sub-
jects and typically exclude reference to site control
and the wider response. First-aid training courses
emphasize emergency decontaminafion as the
primary action for HazMaf exposure: remove fhe
contaminants from fhe vicfim as soon as possible
(Markenson, Eerguson, Chameides, et al., 2010;
Koenig, 2003).
Many SH&E professionals are familiar with boil-
erplate language in the typical safefy data sheet,
advising 15-minute eye and skin flushing and
medical care if employees are exposed. Alfhough
general in their language, fhe aufhors agree wifh
the references and standards for workplace first
aid and emergency eyewash and shower equip-
ment that recommend site- and substance-specific
emergency training for employees, hazard-specific

procedures and hazard-specific response hardware
(ANSI, 2009; ASTM, 2009; OSHA, 2006). Table 4
summarizes relationships among these various
standards related to HazMat emergencies and vic-
tim response.
Cardiac Chain of Survival
While individually strong, numerous HazMat
emergency and HazMat vicfim response sources
are either silent or only provide hints about how
they can work together. The cardiac chain of sur-
vival provides a comparison for cardiac emergen-
cies; if is explicit on the connection between victim
care and the wider response (Travers, Rea, Bobrow,
et al, 2010).
1) early notification to EMS;
2) early CPR;
3) early defibrillation;
4) early advanced emergency medical care.
HazMat Victim Chain of Survival
If the workplace emergency and victim response

standards suffer in isolation, then a HazMat victim
chain of survival, similar to the established cardiac
chain of survival, provides a conceptual fra;mework
for bridging these critical emergency response
steps:
1) Early notification to EMS: Every second de-
layed before calling EMS (e.g., 9-1-1 in most U.S.
locations) results in delayed dispatch and arrival.
As with cardiac and other medical emergencies,
workplace responders to HazMat victim emergen-
cies can fall into tunnel vision performing immedi-
ate response activities. Early notification allows site
responders to get EMS en route before proceeding
fo more complicated tasks such as establishing hot,
warm and cold operational zones.
2) Early emergency decontamination: Every de-
layed second starting emergency decontamination
allows hazardous materials to injure exposed em-
ployees by burning, absorption or inhalation. The
span between these first and second steps should
be as short as possible, and preferably done simul-
faneously by multiple employees and/or workplace
emergency response team members.

3) Early scene control and HazMat characteriza-
Figure 1
Emergency Decontamination
Performance Support Tool
for Site Emergency Responders
Location address:
Location phone number:
Department/Area:
Primary entry/EMS arrival location:
Name(s] of exposed employee(s):
Name(s) of exposed chemical(s):
Time employee(s) in emergency
shower/eyewash:
9-1-1 notified:

Site emergency responders notified:
Spill scene identified/marked:
SDS printed/pulled for EMS:
Emergency responder(s] to primary
entry for EMS:
1234 Street, City, State
(555) 555-5555
Metal Finishing
Shipping/receiving
Name Time
fion: Uncontrolled scenes can permit unauthorized
entry and potential exposure to other employees.
Gaps in informafion or communication lapses can
delay immediately required response actions such
as topical application of calcium gluconate for hy-
drofluoric acid exposure, topical application of

polyefhylene glycol for phenol exposure, adminis-
tration of hydrogen cyanide antidote or other ap-
plicable treatments.
4) Accurate communication to EMS: Gaps in in-
formafion, if unresolved on EMS arrival, can cause
furfher delays in technical decontamination, medi-
cal stabilization, ambulance transportation, defini-
tive decontamination and treatment.
Like the cardiac chain of survival, the HazMat
victim chain of survival is relatively simple, facili-
fafing fraining and retention for workplace emer-
gency responders. The concepts easily work their
way into a performance support tool (Eigure 1),
which can be added to site emergency response
hardware (e.g., spill equipment storage units, first-
aid kits) mounted at walls near emergency eye-
wash and shower equipment.
www.asse.org MARCH 2014 ProfessionalSafety 4 5
Conclusion

Consider this concluding example:
A nonroutine task with inadequate energy iso-
lation results in a pressurized chemical pipe
spraying liquid onto an employee. He screams
and staggers into an emergency shower as
others close the valve. His colleagues refer to
a checklist posted outside the shower, begin
to page site emergency responders and call
9-1-1. The supervisor directs one employee to
print the safety data sheef, another employee to
mark the floor contamination with traffic cones
and caution tape, and another employee to
go to the primary entrance to direct EMS per-
sonnel to the emergency scene. The supervi-
sor and other employees tell the victim to stay
in the shower and that EMS is on the way.
When EMS personnel arrive, they drive to the
employee waving at the primary entrance. In-
side, the supervisor briefs EMS personnel on
the emergency and the hazardous material in-
volved, points out the marked spill zone and
hands them the safety data sheet. Aware of the
hazards, the hazardous area and the amount
of time the victim has been in the shower, EMS

personnel begin their response in an environ-
ment of rapid emergency decontamination and
clearly communicated information promot-
ing responder safety and prompt victim care.
Workplace emergency responders who complete
such a performance support tool, have all the ele-
ments in place for rapid notification to internal and
external responders, rapid emergency decontami-
nation of HazMat victims and accurate information
to arriving EMS personnel who can proceed to vic-
tim care with fewer delays for self-protective scene
evaluation. PS
References
Agency for Toxic Substances and Disease Regis-
try (ATSDR). (2009). Hazardous substances emergency
events surveillance: Annual report 2009. Retrieved from
www.atsdr.cdc.gov/HS/HSEES/HSEES%202009%20
report%20final%2008%2017%2011_9.pdf
ANSI/ISEA. (2009). American national standard for
emergency eyewash and shower equipment (ANSI/
ISEA Z358.1-2009). Arlington, VA: Author.

ASTM International. (2009). Standard guide for de-
fining the performance of first-aid providers in occupa-
tional settings (ASTM F2171-02). West Conshohocken,
PA: Author.
Berkowitz, Z., Horton, D.K. & Kaye, W.E. (2004).
Hazardous substances releases causing fatalities and/
or people transported to hospitals: Rural/agricultural vs.
other areas. Prehospital and Disaster Medicine, 19 Quly-
Sept. 2004).
Currance, P.L., Clements, B. & Bronstein, A.C.
(2007). Emergency care for hazardous materials exposure.
St. Louis, MO: Mosby Elsevier.
Horton, D.K., Berkowitz, Z. & Kaye, W.E. (2003).
Secondary contamination of ED personnel from hazard-
ous materials events, 1995-2001. The American Journal of
Emergency Medicine, 21(3), 199-204.
Koenig, K.L. (2003, Sept.). Strip and shower: The
duck and cover for the 21st century. Annals of Emer-
gency Medicine, 42(3), 391-394.

Markenson, D., Ferguson, J.D., Chameides, L.,
et al. (2010). Part 17: First aid: 2010 American Heart
Association and American Red Cross guidelines for first
aid. Circulation, 322(suppl 3), S934-S946.
NAEMT & American College of Surgeons Com-
mittee on Trauma (2007). PHTLS: Prehospital trauma
life support. Burlington, MA: Jones & Battlett Learning.
NFPA. (2002). Recommended practice for responding
to hazardous materials incidents (NFPA 471). Quincy,
MA: Author.
NFPA. (2008a). Standard for competence of respond-
ers to hazardous materials/weapons of mass destruction
incidents (NFPA 472). Quincy, MA: Author.
NFPA. (2008b). Standard for competencies for EMS
personnel responding to hazardous materials/weapons
of mass destruction incidents (NFPA 473). Quincy, MA:
Author.
OSHA. (2005). Best practices for hospital-based first
receivers of victims from mass casualty incidents involv-
ing the release of hazardous materials (QSHA 3249-98N).

Retrieved from www.osha.gov/Publications/osha3249
.pdf
OSHA. (2006). Best practices guide: Fundamentals of a
workplace first-aid program (QSHA 3317-06N). Retrieved
from www.osha.gov/Publications/OSHA3317first
-aid.pdf
OSHA. (2008a). Hazardous waste operations and emer-
gency response (QSHA 3114-07R). Retrieved from www
.osha.gov/Publications/OSHA3114/OSHA-3114-haz
woper.pdf
OSHA. (2008b). Hospitals and community emer-
gency response: What you need to know (QSHA 3152-
3R). Retrieved from www.osha.gov/Publications/
OSHA3152/3152-hospitals.pdf
OSHA. (2009). Best practices for protecting EMS
responders during treatment and transport of victims of
hazardous substance releases (OSHA 3370-11). Retrieved
from www.osha.gov/Publications/OSHA3370-pro
tecting-EMS-respondersSM.pdf
Travers, A.H., Rea, T.D., Bobrow, B.J., et al. (2010).

Part 4: CPR overview: 2010 American Heart Associa-
tion guidelines for cardiopulmonary resuscitation and
emergency cardiovascular care. Circulation, n2(suppl
3), S676-S684.
Trebisacci, D. (Ed.). (2008). Hazardous materials/
weapons of mass destruction response handbook. Quincy,
MA: NFPA.
Vogt, B.M. & Sorensen, J.H. (2002). How clean is
safe? Improving the effectiveness of decontamination of
structures and people following chemical and biological
incidents (Report No. ORNL/TM-2002/178). Retrieved
from http://emc.ornl.gov/publications/PDF/How
_Clean_is_Safe.pdf
Disclaimer
The opinions in this article are those of the
authors and do not represent official positions
of Oregon OSHA or any affiliated agency.
4 6 ProfessionalSafety MARCH 2014 wivw.asse.org

Copyright of Professional Safety is the property of American
Society of Safety Engineers and
its content may not be copied or emailed to multiple sites or
posted to a listserv without the
copyright holder's express written permission. However, users
may print, download, or email
articles for individual use.

Program DevelopmentPeer-RevieweiHazMateraK ^enc .docx

More Related Content

Similar to Program DevelopmentPeer-RevieweiHazMateraK ^enc .docx (20)

More from wkyra78 (20)

Recently uploaded (20)

Program DevelopmentPeer-RevieweiHazMateraK ^enc .docx