Program intervensi obesiti RAZI 2012

Editor's Notes

• #6: Animated vertical block list (Intermediate) To reproduce the SmartArt graphic effects on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, click Vertical Block List, and then click OK to insert the graphic into the slide. To create a fourth row, do the following: Select the third block shape (the shape on the left side)at the bottom of the graphic, and then under SmartArt Tools, on the Design tab, in the Create Graphic group, click the arrow next to Add Shape, and select Add Shape After. To add a bulleted, rectangle shape next to the fourth block shape, select the fourth block shape, and then under SmartArt Tools, on the Design tab, in the Create Graphic group, click Add Bullet. To enter numbers and text in the blocks and rectangles, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text for each shape. (Note: In the example slide, the highest level text are the “1,” “2,” “3,” and “4.” The next level text is only one bullet (delete the second bullet) and are “First statement,” “Second statement,” and so on.) To reproduce the rectangle effects on this slide, do the following: Press and hold CTRL, and then select each of the rectangles (on the right of the graphic). Under SmartArt Tools, on the Format tab, in the Shapes group, click the arrow to the right of Change Shape, and under Rectangles select Snip Diagonal Corner Rectangle (the fifth option from the left). With the rectangles still selected, drag one of the left center sizing handles to the left 1” to lengthen all four at once. Also with the rectangles selected, on the Home tab, in the bottom right corner of the Paragraph group, click the Paragraph dialog box launcher. In the Paragraph dialog box, under Indentation do the following: In the Before Text box, enter 1”. In the Special list, select Hanging. Next to the Special list, in the By box enter 1”. Click OK. Select the SmartArt graphic, and then under SmartArt Tools, on the Design tab, in the SmartArt Styles group, click More Styles, and under 3-D select Polished Effect (the first option form the left). Select the first rectangle from the top (“First statement” in the example slide), and on the Home tab, in the Drawing group, click the arrow to the right of Shape Fill, and under Theme Colors select Red, Accent 2 (first row, the sixth option from the right). Select the second rectangle from the top (“Second statement” in the example slide), and on the Home tab, in the Drawing group, click the arrow to the right of Shape Fill, and under Theme Colors select Olive Green, Accent 3 (first row, the seventh option from the right). Select the third rectangle from the top (“Third statement” in the example slide), and on the Home tab, in the Drawing group, click the arrow to the right of Shape Fill, and under Theme Colors select Purple, Accent 4 (first row, the eighth option from the right). Select the fourth rectangle from the top (“Fourth statement” in the example slide), and on the Home tab, in the Drawing group, click the arrow to the right of Shape Fill, and under Theme Colors select Orange, Accent 6 (first row, the tenth option from the right). Press and hold CTRL, and select all of the rectangles (on the right side of the graphic). On the Home tab, in the Font group, in the Font Size box, select 36 pt., and in the Font Color list, under Theme Colors select White, Background 1 (first row, the first option from the left). To reproduce the circles on this slide, do the following: Press and hold CTRL, and then select the four block shapes (the shapes on the left) in the SmartArt graphic, and then under SmartArt Tools, on the Format tab, in the Shapes group, click the arrow to the right of Change Shape, and under Basic Shapes select Oval (first row, first option from the left). On the slide, drag one of the top right sizing handles to the left to make the ovals into a circle and to make them smaller. Also with the four circles selected, position the circles so that they cover the bullet on the rectangles, and then on the Home tab, in the Font group, in the Font Color list, under Theme Colors select White, Background 1, Darker 50% (sixth row, first option from the left). Also on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following: In the Type list, select Radial. In the Direction list, select From Center (third option from the left). Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider Also under Gradient stops, customize the gradient stops that you added as follows: Select the first stop in the slider, and then do the following: In the Position box, enter 0%. Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left). Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors select White, Background 2, Darker 25% (fourth row, first option from the left). To reproduce the animation effects on this slide, do the following: On the slide, select the SmartArt graphic. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade. Also on the Animations tab, in the Advanced Animation group, click Add Animation, and then under Motion Paths click Lines. Also on the Animations tab, in the Animation group, click Effect Options, and then click Right. On the slide, right-click the motion path and select Reverse Path Direction. On the Animations tab, in the Advanced Animation group, click Animation Pane. Press and hold CTRL, and select the two effects in the Animation Pane. Click the arrow to the right of the selected effects and select Effect Options. In the Effects Options dialog box, do the following: On the Timing tab, in the Duration box enter 1.00. On the SmartArt Animation tab, in the Group graphic list select One by one. Click OK. In the Animation Pane, click the double arrows under the two effects to show all the effects for all the shapes (16 effects). Press and hold CTRL, and select all of the effects in the Animation Pane. On the Animations tab, in the Timing group, in the Start list, select With Previous. Press and hold CTRL, and select the first, third, fifth, and seventh effects (fade entrance effects). On the Animations tab, do the following: In the Advanced Animation group, click Add Animation, and then under Entrance click Grow & Turn. In the Timing group, in the Start list, select After Previous. Press and hold CTRL, and select the ninth, eleventh, thirteenth, and fifteenth effects (right motion paths) in the Animation Pane. Click the arrow next to the effect and then click Remove. Select the ninth effect (right motion path) in the Animation Pane and drag it before the third effect in the list. Select the tenth effect (right motion path) in the Animation Pane and drag it before the sixth effect in the list. Select the eleventh effect (right motion path) in the Animation Pane and drag it before the ninth effect in the list. To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Radial. Click the button next to Direction, and then click From Center (third option from the left). Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider Also under Gradient stops, customize the gradient stops that you added as follows: Select the first stop in the slider, and then do the following: In the Position box, enter 33%. Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, the first option from the left). Select the last stop in the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 25% (fourth row, first option from the left).