Review on modeling of coal blends for prediction of coke quality
2 likes1,077 views
The document reviews the development of models for predicting coke quality from coal blends, focusing on three main stages from the 1960s to the present. It discusses early local models, the evolution into global models due to increased international coal trade, and the incorporation of advanced techniques such as optimization and neural networks. Conclusions highlight the complexity of modeling coke quality, reflecting changes in coal characteristics, technology, and market demands over time.
Review on modeling of coal blends for prediction of coke quality
- 1. Review on Modeling of Coal Blends for Prediction of Coke Quality Mariano de Cordova Jorge Madias Javier Barreiro
- 2. Review on Modelling of Coal Blends • Content – Introduction – First development stage – Second development stage – Third development stage – Conclusions
- 3. Introduction • : technological services to the Latin American steel industry • : industrial automation company applying new technologies in different Industries
- 4. Introduction • Blast furnace operation with coal/natural gas injection requires high coke quality • For lowest coke cost while retaining necessary coke quality, the choice of coals and the formulation of the blend is a very important issue • A widely utilized tool for blend design is modeling, preceded by coal characterization and followed by pilot oven testing • In this paper, the development of models is reviewed, based on public literature. Three main stages are taken into account, form the sixties to current times.
- 5. First development stage • Till mid-sixties, the seaborne coal trade was small, mostly form North America to Europe and Asia • At the same time, most of the coking coal consumed in Europe and North America (and even Japan) came from domestic mines • In this frame, models developed were mostly local/regional, based on the features of local coals • North America, Germany, Australia, South Africa
- 6. First development stage • North America – Shapiro and Gray at US Steel: Coal petrography to determine coke stability • For Appalachian coals (east of USA) – Macerals divided in active and inert • Active macerals: vitrinite, exinite and one third of semifusinite • Inert macerals : inertinite, mineral matter and two thirds of semifusinite – Reflectogram of total reactives, considered as vitrinite, classified in 21 groups (V1 to V21) – Composition Balance Index (CBI): a function of total inerts and the sum of the optimal ratio between reactives and inerts (R/I) given by each vitrinite type, according to an experimental curve – Strength Index (SI): a function of total reactives, total inerts and the sum of the strength factors contributed by each vitrinite type, according to an experimental curve – Graph with isostability curves; coke stability defined taking into account CBI & SI values
- 7. First development stage • North America – Long lasting influence on modeling of blends – Illinois State Geological Survey • Illinois coals • New curves for calculation of CBI and SI – Consol • A synthesis of the two previous conceptions – Bethlehem Steel • East Kentucky coals • Seudovitrinite added
- 8. First development stage • North America – Canada • Inclusion of coal rheology in the prediction scheme (Leeder & Price, CANMET) • Graph based on results of 180 coke oven tests
- 9. First development stage • Germany • Mackowky and Simonis: calculation based in the Ruhr dilatation test, coal preparation and operating conditions, for coals and blends of the Ruhr basin • M40 = aK + b + Msα (1) – B: a function of volatile matter – Ms: sum of positive and negative deviations from optimal grain size – K: a function of operating conditions (bulk density, coking rate, oven width) – A, α constants that depend of volatile matter and factor G (calculated from data of the Ruhr dilatation test) – Applies to blends of 18-35 % volatile matter, and an inert content lower than 20%
- 10. First development stage • Australia – Brown, Taylor and Cook, for Australian colas – Coal rank (reflectance) and petrography – In Australian coals, semifusinite does not behave as partially reactive; so, it is included with the other macerals of the inertinite group, reporting to the inerts – Besides, most of the inertinite is intimately associated to vitrinite. As a consequence, a dense coke is formed due to the combined action of these two macerals, not as if they were individual components, as in USA coking coals – These coals, according to the Northern hemisphere standards, should not produce a strong coke; nevertheless, they are capable to yield a coke quality adequate for large blast furnaces
- 11. First development stage • South Africa – Stein and Smith, ISCOR: petrographic data to calculate M40 and M10 – Many South African coals have low vitrinite and high semifusinite and micrinite – Coke obtained was of superior quality than those produced with coal of high vitrinite – Maximum medium reflectance of the reactive macerals (RoR index) is calculated as a function of maximum medium reflectivity of vitrinite, % vitrinite, % exinite, % reactive semifusinite and total% of reactive macerals – M40 and M10 are determined by using a family of isoresistance curves, depending on CBI and RoR index
- 12. Second development stage • Late seventies, eighties: Global models – CSR prediction – Increased the international coal trade – New plants built in Asia and South America, in countries without coal resources – Japan increased its imports from Australia and Canada – European coal mines have started to be close down before, due to a high production cost in comparison with imports – Lower demand by domestic plants in the USA by early eighties prompted exports to Japan and Europe – PCI started to be implemented in blast furnaces, bringing about at the same time less coke consumption but requiring higher quality coke – Global coke quality prediction models in Japan and Europe were worked out, including coals from USA, Canada, Australia, South Africa – More coal characterization variables started to be taken into account, rheology in particular – Interest in coke behavior in the blast furnace arose, claiming for prediction of key coke high temperature properties like CSR and CRI
- 13. Second development stage • Japan – MOF diagram (Miyazu, Okuyama and Fukuyama, NKK) – Coals from the USA, Australia, Canada and Japan – Criteria: blends with 1.2 to 1.3 vitrinite and 200 to 1000 ddpm of maximum fluidity, can produce a coke with a cold strength DI 30/15 > 92%
- 14. Second development stage • Japan – Nippon Steel • Sakawa and others: modifications of Shapiro-Gray • Iso-resistance lines in terms of DI30/15 and DI150/15 • Corrections of CBI and SI, with the maximum fluidity of the blend are made, when Australian and Canadian coals are included
- 15. Second development stage • Europe – R. Munnix (CRM) ; coals from America, Australia, Africa, and Europe – Based in total inert content (TIC), reactive caking index (RCI), and maximum fluidity – Maximum fluidity incorporated as log (mf + 1), so called LGF, to include inert components in the blend (anthracite, petroleum coke) – Output in terms of cold strength indices M40, M10, I40, I20 and I10 – Polynomic third degree functions of TIC, RCI and LGF are used
- 16. Second development stage • Europe – Coke Research Establishment, UK, Gibson and Gregory – Blends of imported high and low volatile coals – Variables taken into account • Factor G, from the dilatation test • Volatile matter content (V) • Coking time to 900° C (T) for a 450 mm width oven
- 17. Second development stage • CSR models – Prediction of coke behavior in the blast furnace became more important with • Dimensional growth of the blast furnaces • Implementation of the pulverized coal injection (PCI) – Steel companies and institutes developed prediction models taking into account coal properties • Reflectance • Inert content • Maximum fluidity • Coal ash alkalis
- 18. Second development stage • CSR models Company Coal Petrography Coal Rheology Ash Others Year British Steel Vitrinite reflectance Coke ash content 1977 NKK Coke petrography 1978 Nippon Steel Inertinite %, Maximum medium reflectance Maximum fluidity Coal ash alkali index 1980 BCRA Inertinite % Maximum fluidity Coal alkali content Coal Oxygen and Carbon content; pores/cm2 coke 1982 Kobe Steel Maximum medium reflectance Maximum fluidity Coal ash alkali content 1985 CANMET Maximum medium reflectance Coal ash modified basicity index Total dilatation 1988 BHP Inert content Maximum fluidity Coal ash basicity Volatile matter 1989 Inland Steel Plastic temperature range Coal ash alkali index Coal sulphur 1989 ISCOR Vitrinites maximum reflectance; organic inerts % Maximum fluidity Coal ash basic oxides 1990
- 19. Third development stage • Updates, neural networks and optimization – In the new century, coal and iron ore demand increased and so did the interest in alternative carbonaceous materials, and processes to use weakly coking coals to some extent – Models had to be updated – Optimization tools were applied
- 20. Third development stage • Updates to older models – NKK’s researchers have found earlier that the Gieseler Maximum Fluidity (MF) of their coking blends, consisting of many international coals, should be a minimum of 200 ddpm to produce high strength coke – However, coking results with Western Canadian coals alone, or in international blends, showed that high strength coke could be produced at a much lower blend MF – Research was carried out with different international coal sources to develop a more detailed model to predict the minimum MF – For instance, a lower minimum blend MF is required for Canadian coals (20-40 ddpm) and a higher minimum blend MF for USA coals (500-700 ddpm) – A suggestion on how to calculate an international coal blend minimum MF was presented
- 21. Third development stage • Neural networks – Applied to almost all steps in the steel production, including coke plant – Use for better CSR prediction at Tata Steel – Improvement in the predictions came by increased number of inputs, adopting multilayer hidden strategy and greater number of epochs for training data. – However, since the ANN models have poor interpretability due to the ‘black box’ structure, it is often merged with the transparent and more interpretable fuzzy logic to form neurofuzzy inference systems – Adaptive neurofuzzy inference system (ANFIS) was selected later on by Tata Steel researchers
- 22. Third development stage • Neural networks – CSR Prediction at Tata Steel
- 23. Third development stage • Neural networks: CSR prediction at Tata Steel
- 24. Third development stage • Optimization models - Steel COst OPtimization (SCOOP) – By the year 2000, experts in operating research at a Belgian university started up a project on an optimization tool for the steel industry. This project was then taken over by N-SIDE – SCCOP is a program that integrates all units of a blast furnace based steel plant, including coke plant, sinter plant, blast furnace and steelmaking, to globally optimize the production process – The aim is to minimize steel production cost by right selection of raw materials and adaptation of the process to market conditions – References: ArcelorMittal Dunkirk, Erdemir, NLMK, Severstal, CSN, Gerdau Ouro Branco, Usiminas, ThyssenKrupp CSA. – Coal & coke module • Coal properties are the input for the model: ultimate analysis, rheology, reflectance, reactives and inerts content, CBI, SI, etc. • When required, lower and upper limits for these properties are defined • Cost and availability of the coals are an input, too • Coal properties are used to predict coke cold strength, as well as CRI and CSR • Minimal cost of blend or coke is established, introducing the coal-to-coke yield and operating costs
- 25. Third development stage • Optimization models - Coal Blend Optimization (CBO) – Developed by SunCoke using MATLAB version 7 – Data base with 100 coals; 58 data per coal (ultimate analysis, chemistry of ash, rheology, petrography, cost, etc.) – Lower and upper limits to each coal are fixed – The model read first the coal properties and then the constraints, divided into linear and non-linear, this last linked to various calculation models – As a result, CBO obtains the lowest cost blend of five coals, the blend properties and the forecast of coke properties – It is possible to run the model modifying the constraints
- 26. Third development stage • Optimization models - Coal Blend Optimizer (COBOP) – ANT Automation, US-based supplier (one of the authors) • Process model module • Optimization model module • Statistical module • Calibration module – Process model is at the core of the program • Inputs – Coal availability – Coal properties – General data • Output – Estimated coal blend properties – Coke quality – Coke price – Optimization module: Requires constraints • Output – Least cost blend – Expected emissions – Coke quality
- 27. Third development stage • Optimization models - Coal Blend Optimizer (COBOP)
- 28. Third development stage • Optimization models - Coal Blend Optimizer (COBOP) – Estimates coal blend and coke properties and finds a blend that could accomplish with blend / coke quality and production minimizing the coal blend cost to significant levels – It can be considered price coals in the market + the coal price paid taking in account availability on coal yard as well as market opportunities – The main economical savings in the process could be obtained by • Coal Blend Cost Optimization • Blend Consumption Reduction • These two combined effects
- 29. Third development stage • Optimization models – Coal Blend Optimizer (COBOP) – Focus in user experience – Designed to minimize the user input data, and have as much information and data entry as possible in a simple screen – Interface HTML5 based, what makes it a responsive application that could also run in mobile device – Runs made by different users, can be shared or published among group of selected users inside the same company – COBOP system enables run comparisons, and trends. By slighting moving parameters in the model, stability chart and any other parameter result can be compared graphically using the user model HTML interface
- 30. Third development stage • Optimization models – Coal Blend Optimizer (COBOP)
- 31. Third development stage • Optimization models – Coal Blend Optimizer (COBOP)
- 32. Third development stage • Optimization models – Coal Blend Optimizer (COBOP)
- 33. Conclusions • The models for prediction of coke quality have an intrinsic complexity, as the results are linked to the specific features of the coals, which vary from country to country and within countries. So, the models have been changing along time, as the coal market and the mining and preparation techniques evolved, as well as the coke plant technology and the blast furnace requirements • Firstly, the Shapiro-Gray’s charts combining petrographic variables with coke strength at ambient temperature was taken as a base by many other researchers, modifying the procedure to include features of coals from other countries, and the different cold strength tests (MICUM and IRSID tests in Europe, DI150/30 in Japan) • Then, rheology was introduced in different ways, to take into account a direct measurement of coal behavior during coking • Later on, with the trend to large blast furnaces and PCI, to predict coke behavior at high temperature became imperative and so researchers worked on different ways to get this prediction • Finally, optimization schemes helped in having a better choice of raw materials, taken into account the complete chain value in some cases, or just coke price and quality in other cases
- 34. Thank You! Mariano de Cordova, Jorge Madias metallon, San Nicolas, Argentina marianodecordova@metallon.com.ar jorge.madias@metallon.com.ar Javier Barreiro ANT Automation, Pittsburgh, USA javier.barreiro@ant-automation.com