Rtu ee control system lab 5th sem
- 1. MATLAB SIMULINK FOR ENGINEERING& TECHNOLOGY Control System Lab www.matlabsimulink4et.co S. No. Topic Link 1. (a) Plot step response of a given TF and system in state- space. Take different values of damping ratio and wn natural un-damped frequency. (b) Plot ramp response. Click Here Click Here 2. To design 1st order R-C circuits and observe its response with the following inputs and trace the curve. (a) Step (b) Ramp (c) Impulse Click Here 3. To design 2nd order electrical network and study its transient response for step input and following cases. (a) Under damped system (b) Over damped System. (c) Critically damped system. Click Here 4. To Study the frequency response of following compensating Networks, plot the graph and final out corner frequencies. (a) Leg Network (b) Lead Network. (c) Leg-lead Network. Click Here Click Here Click Here
- 2. 5. Draw the bode plot in real time for a Non-Inverting amplifier. Click Here 6. Draw the bode plot in real time for an Inverting amplifier. Click Here 7. Draw the bode plot for second order transfer function. Click Here 8. Draw the bode plot for first order transfer function. Click Here 9. Design and analyse Tow- Thomas biquad filter. Click Here 10. Design and calculate Kp, Ki for PI controller. Click Here 11. Design PID controller and also calculate Kp, Ki, Kd for it. Click Here