Safari Instruction

Minelab is always interested in your opinions.
If you have any questions or comments
regarding the Safari or any other Minelab
product, please feel free to contact us directly
or via your local Authorised Minelab dealer.
For further product information
and detecting tips, refer to:
www.Minelab.com
Quick Start
1 Turn on Safari by pressing the
Power button.
2 On initial start-up, your detector will default
to the factory Coin Mode.
3 To select a different factory preset Detect
Mode, press and release the appropriate
Mode button.
4 The icon next to the corresponding
preset Detect Mode, indicates that a
factory preset Mode has been selected. The
detector will apply the factory determined
Discrimination Pattern and audio response
for that Mode.
5 Press the Noise Cancel button and wait
the 20 seconds it takes to select the most
stable channel.
6 Once the Noise Cancel sequence is
completed you can start detecting!

1
Thank you for purchasing the Minelab Safari
metal detector.
Metal detecting is a fascinating and
rewarding activity enjoyed by people all over
the world. By getting to know your Safari
you can become one of the many successful
detectorists who combine their passion
for the outdoors with the excitement of
discovering valuable coins, relics, gold and
jewellery on a regular basis.
Safari will locate valuable metal objects such
as gold, coins, jewellery and other metallic
items. The detector’s easy-to-use control
panel enables anyone, from beginner to
expert, to start detecting immediately after
assembly.
Minelab recommends you initially use Safari
in one of the four selectable factory preset
modes to become familiar with its operation.
These Detect Modes have been optimised to
provide you with settings suitable for most
applications.
Your Safari is designed to provide you with
years of treasure hunting enjoyment. To
ensure you get the most from your Safari, we
recommend that you read this Instruction
Manual to help assemble, take care of and
learn how to operate your new detector.
Minelab wishes you every success with
your Safari!
Congratulations on purchasing
your Minelab

2 Contents
Quick Start
How Metal Detectors Work
The Technology of Safari
Assembly
Adjusting the Detector for Comfortable Detecting
Battery Packs
Turning the Detector On
Introducing the Control Panel
Introducing the Detect Screen
Detecting Basics
A Simple Detecting Exercise
Detect Modes
Coin Mode
Coin & Jewellery Mode
Relic Mode
All Metal Mode
Pinpoint
Menu
Sensitivity
Target Volume
Threshold
Noise Cancel
Contrast
Trash Density
Discrimination
Discrimination (Accept/Reject) Scale
To Modify the Discrimination Pattern
To Create and Save a User Mode
Technical Specifications
Factory Presets
User Information
Recovering the Target
Treasure Locations
Detector Care and Safety
Troubleshooting
Warranty and Accessories
Service and Repair Form
Inside Front Cover
3
4
5
8
10
13
14
16
18
19
21
22
22
23
23
24
25
26
26
27
27
28
28
30
30
30
32
33
34
35
36
37
38
39
40

3
Metal detectors create an electromagnetic
(EM) field around the coil, which penetrates
the ground. Because metal is conductive it
causes a change in this field. The detector
senses this change through the coil and
sends a signal back to the control box,
alerting the operator.
Metal detectors can determine the size, shape
and composition of metallic objects beneath
the coil. Typically, the larger the object, the
easier it is to detect.
A metal detector’s EM operating frequencies
are measured in kilohertz (kHz). Low
frequency EM fields (e.g. 1.5kHz) penetrate
the ground deeply, but sensitivity to smaller
targets is low. High frequency EM fields (e.g.
65kHz) have a shallower depth of penetration,
but sensitivity to small targets is high.
Safari’s multiple frequency operation provides
the advantage of both; good depth and high
sensitivity.
How Metal Detectors Work
Item Number: 4901 - 0070
Revision: 1.1

4
Single Frequency
FBS Comparison
Dual Frequency
FBS Multiple Frequency
The Technology of Safari
Full Band Spectrum (FBS)
Most detectors on the market operate on a
single or dual frequency, ranging from 1 to 70
kilohertz (kHz).
Although this technology has served the
industry well for years, Minelab found that
a frequency that worked well in one area
would often offer only marginal performance
when used in another location. Ground
mineralisation, trash content and target
size all had an impact on how effectively
a detector transmitting a single frequency
would operate.
FBS technology combines Minelab’s
multiple frequency BBS (Broad Band
Spectrum) technology with a powerful new
microprocessor to give:
• Greater detecting depth
• High sensitivity over a wide range of
targets
• Less interference from electromagnetic
sources
• More accurate identification of target
characteristics
The FBS circuit automatically transmits
multiple frequencies simultaneously. This
increased frequency range means that the
signal received from the detector coil is
analysed from a wide range of responses.
This allows Safari to analyse more target
information so that the target identification
(ID) is more accurate.
Minelab’s unique FBS technology means
deep, sensitive, accurate detecting.
Discrimination (Disc.)
Discrimination is the ability of a metal
detector to identify your desired targets (e.g.
coins and jewellery) and eliminate signals
from undesirable material (e.g. nails).
Safari can be programmed in a number
of ways to discriminate against unwanted
targets in different types of ground.
Ground Compensation
Safari uses a sophisticated approach for
the elimination of ground mineralisation
effects. It uses advanced digital filtering to
eliminate the influence of ground signals. This
is achieved automatically, allowing you to
concentrate on detecting targets.

5
Attaching the coil to the Lower Shaft:
Note: Before attaching the coil to the Lower
Shaft, remove the nut, bolt and washers
from the coil.
1 Plug the two rubber washers into the holes
on either side of the Lower Shaft.
2 Feed the coil cable up through the inside
of the Lower Shaft, ensuring the coil cable
appears out the top of the Lower Shaft.
Assembly
3 Place the coil on a flat surface.
4 Slide the Lower Shaft into the bracket on
top of the coil. Ensure that the open side of
the Lower Shaft faces the ground.
5 Insert the bolt through the Lower Shaft and
the bracket on top of the coil.
6 Fasten with the nut provided, taking
care not to damage the thread of the
nut by over-tightening. This will need to
be loosened later to adjust the coil to a
comfortable detecting angle.
WARNING: The coil cable is directly
wired into the coil and is not removable.
Any attempt to remove this cable will
void your warranty.

6
Attaching the Lower Shaft to the
Upper Shaft:
1 Release the Upper Shaft camlock by pulling
the lever away from the shaft.
2 Feed the coil cable up through the inside
of the Upper Shaft, ensuring the camlock
side of the shaft is facing the ground.
Connecting the Shaft Assembly to the
Handle Assembly:
1 Release the Control Box camlock by pulling
the lever away from the Control Box.
2 Align and push the coil cable connector
into the socket underneath the Control Box,
firmly tightening the retaining ring
to secure.
3 Slide the Upper Shaft over the Lower Shaft,
so the coil cable appears out the top.
3 Push the Handle Assembly onto the Upper
Shaft, as far as it will go.
4 Lock the Control Box camlock by pushing
the lever flat onto the Control Box.
Assembly

7
Attaching the Armrest Strap:
1 Clip both buckles onto the outer sides of
the armrest.
Disconnecting the coil:
1 Reverse the steps in ‘Connecting the
Shaft Assembly to the Handle Assembly’,
‘Attaching the Lower Shaft to the Upper
Shaft’ and ‘Attaching the coil to the
Lower Shaft’.
2 Pull the coil cable out from inside the
lower shaft.
Attaching the Headphones:
1 Plug the headphone jack into the
headphone socket, located in the
rubber seal at the battery end of the
Handle Assembly.
The headphones may be plugged or
unplugged at any time.
WARNING: Do not attempt to
completely remove the shaft assembly
while the coil cable is still connected to
the Control Box.

8 Adjusting the Detector for
Comfortable Detecting
For comfortable detecting it is important to
take the time to adjust the detector correctly.
Holding the Detector
Thread your arm through the armrest and
strap. Grasp the handle of the detector and
rest your forearm in the armrest.
The correct position of the armrest should
allow you to comfortably grip the handle.
Your elbow should sit just above the back of
the armrest and the detector should feel like
an extension of your forearm.
Adjusting the Armrest Strap:
1 Loosen the strap by tilting the top edge
of the buckle out to release it from
the armrest.
2 Undo the Velcro and pull the buckle
outwards (towards yourself) to loosen
the strap.
3 Clip the buckle back into place and tighten
the strap until your arm is secure whilst in
the armrest. Re-attach the Velcro.
2 While holding the detector, slide the
armrest to sit just below your elbow.
3 Remove your arm. Tighten screw (turn
clockwise) to lock the armrest into position.
Adjusting the Position of the Armrest:
1 Use a screwdriver, or the edge of a coin,
to loosen the screw in the centre of the
armrest (turn counter-clockwise).

9
Adjusting the Length of the Shafts
A correct shaft length will allow you to
swing the coil over the ground without
uncomfortably stretching or stooping.
If the coil is too far from your body it will be
difficult to balance and manoeuvre
while detecting.
Shaft is the
correct length
Shaft is
too short
If the coil is too close to your body it may
detect your digging tools or any other
metal which you are carrying, causing
confusing sounds.
Adjust the lower shaft to the correct length,
securing the camlock to hold it in place.
A longer lower shaft is available for
tall people (p. 39).
Adjusting the Angle of the Coil:
1 Loosen the bolt that connects the Lower
Shaft to the Coil. It should be loose
enough to allow the Coil to be moved for
adjustment, but tight enough that the Coil
can hold its position.
2 While holding the detector as if detecting,
lightly press the Coil to the ground until it
sits flat/parallel with the ground. The Coil
should remain parallel when lifting to the
sweep height, approximately 25mm (1”)
above the ground.
3 Tighten the bolt, but do not over-tighten it.

10 Battery Packs
Safari comes with a standard Alkaline battery
pack. Eight high quality, fresh, 1.5V AA alkaline
batteries will power the Safari for up to 14
hours of constant use.
Optional accessory NiMH battery packs are
available as well (See Accessories p. 39). The
NiMH 1600 mAh battery pack will power the
detector for up to 12.5 hours of constant use
and the NiMH 1800 mAh battery pack for 14
hours.
Unlike Nickel Cadmium batteries, the
NiMH battery pack DOES NOT have to be
discharged before recharging. Whenever
the detector has been unused for a lengthy
period, recharge the battery pack to ensure
full performance. There is no limit to the time
the battery pack can be left on charge.
Note: Removal instructions apply to both types
of battery packs.
Removing the Battery Pack from the
Battery Compartment:
1 Ensure that the detector is turned off
before removing the battery pack.
2 Rest the detector on a flat surface.
Disconnect the headphones.
3 Lift the rubber seal of the battery
compartment located at the end of the
handle assembly.
4 Raise the yellow tab to release the spring
loaded battery pack.
5 Remove the battery pack entirely from the
battery compartment.
Inserting the Battery Pack into the
Battery Compartment:
1 Lift the rubber seal of the handle assembly.
2 Slide the battery pack entirely into the
handle assembly, until it clicks into place.
3 Close the rubber seal, to close the battery
compartment.
WARNING: Do not attempt to
disassemble the NiMH battery pack.
If disposing of battery pack, do not
incinerate. Contact your local authorities
to enquire about disposal or recycling
facilities.

11
Replacing ‘AA’ Batteries:
1 Slide the lid of the battery pack in the
direction of the arrow to open.
2 Place eight high quality AA cell alkaline
batteries into the battery pack, ensuring
that the + and – terminals are aligned as
indicated on the label.
3 Slide the battery pack lid closed until it
‘clicks’ into place.
High quality alkaline batteries are
recommended for optimum detection
time. Rechargeable alkaline, NiMH or NiCad
AA batteries may be used but must be
removed and recharged separately. Check
fitment of rechargeable batteries prior to
purchase, as some do not comply with
standard size requirements.
– Please note the following:
– Do not use rechargeable Lithium Ion
batteries with your Safari. They may
damage the detector and void your
warranty. Rechargeable Lithium Ion
batteries will give a combined voltage
above 13V and therefore cannot be used
with Safari.
– Do not leave drained AA batteries in the
detector as they can leak.
– The optional rechargeable battery packs
will not be damaged if left on the charger
for more than 22 hours.
– The battery chargers will not recharge
rechargeable alkaline or NiCad AA batteries.
– Using a non-Minelab charger with the
battery pack may damage it and will void
the product warranty.
– Unlike Nickel Cadmium batteries, the NiMH
battery pack DOES NOT need to be drained
of all power before being recharged.
– Do not charge the battery at temperatures
above 45°C (113°F).
– Do not charge the battery at temperatures
below 0°C (32°F).
– Do not leave the battery exposed to very
hot conditions (e.g. on the dashboard or
rear parcel shelf of your car) or very
cold conditions.

12
Charging the 1600/1800mAh NiMH
Battery Packs (optional accessories)
To charge your battery, only use the Minelab
charger designed for your NiMH battery.
Using other chargers may damage your
battery and will void the product warranty.
Battery Packs
Recharging NiMH Battery Packs with the
Mains Charger:
1 Remove the battery pack.
2 Insert the mains charger cable into the
socket at the tapered end of the battery
pack.
3 Plug the mains charger into the wall socket
and turn on the switch.
4 Leave for 18 hours to fully recharge the
1600mAh pack (22 hours for the 1800mAh
pack). If the battery was not completely
discharged, the charging time will be
shorter. New batteries will reach their full
capacity after several charge/discharge
cycles.
5 Once charged, disconnect the battery
charger plug from the battery pack.
Note: It is normal for the tip of the
rechargeable battery to get warm
while charging.
Recharging NiMH Battery Pack with the
Car Charger:
1 Remove the battery pack.
2 Insert the car charger plug into the
accessories socket of your vehicle.
3 Insert the car charger plug into the socket
at the tapered end of the battery pack.
A small light on the car charger illuminates
indicating that the car charger is in
operation.
4 Leave for 18 hours to fully recharge the
1600mAh pack (22 hours for the 1800mAh
pack). If the battery was not completely
discharged, the charging time will
be shorter.
5 Some vehicles may require the ignition to
be switched on to ‘Accessories’ for power to
be supplied to the charger.
6 Charging the battery for longer than 18
hours will not damage the NiMH battery
pack. However, it may gradually discharge
your car battery.
Note: The car charger is provided with a
fuse for short circuit protection. This can be
accessed by unscrewing the tip of the
charger plug.

13
To Turn on Safari:
Press and release the Power button to turn
your detector on/off. On first time start-up,
your detector will default to the Coin Mode
and you can begin detecting.
Turning the Detector On
When you turn your detector on, the detector
will start with the last setting used in your
previous detecting session.
Quick Start
– Turn on Safari by pressing the
Power button.
– On initial start-up, your detector will default
to the factory Coin Mode.
– To select a different factory preset Detect
Mode button.
– The icon next to the corresponding
preset Detect Mode, indicates that a
factory preset Mode has been selected. The
detector will apply the factory determined
Discrimination Pattern and audio response
for that Mode.
– Press the Noise Cancel button and wait
the 20 seconds it takes to select the most
stable channel.
– Once the Noise Cancel (p. 27) sequence is
completed you can start detecting!
Important: While performing a Noise
Cancel it is important to keep the
detector’s coil motionless, and also ensure
that no metallic objects are moved in close
proximity to the detector’s coil.

14 Introducing the Control Panel
Pinpoint
Pressing turns Pinpoint On/Off . Pinpoint (p. 24)
assists in locating the exact position of a target prior
to recovery.
Coin & Jewellery
Pressing activates the Coin & Jewellery Detect Mode
(p. 22).
Coin
Pressing activates the Coin Detect Mode (p. 22).
Power
Pressing turns Safari On/Off.
Holding for approx. five seconds resets the detector
(p. 34) to the Factory Preset settings, prior to startup.
Minus & Plus (–/+)
Pressing in the Menu will step through the settings.
Pressing within a Menu setting will adjust that setting
(p. 25).
Menu
Used to access the Menu at any stage of detector
operation. This allows access to various settings (p. 25).

15
All Metal
Pressing activates the All Metal Detect Mode (p. 23).
Relic
Pressing activates the Relic Detect Mode (p. 23).
Noise Cancel
Starts the scan for the quietest operating frequency.
The scan takes approx. 20 seconds (p. 27).
Accept/Reject
Pressing in the Detect Screen accepts or rejects the
detected target (p. 30).
Legend Scale
When a target is detected it is categorized based on the types of metal objects that typically produce a similar
kind of signal. This is represented by the “flashing” icon in the Graphic Identification Bar. The Legend Scale is
designed to be a useful guide to the “probable” composition of a target based on the detected signal. The
accuracy of this representation is dependent on certain factors such as: ground type, target conductivity, the
angle of the target in the ground, its depth, age and physical condition.
Note: In some instances this can result in similar target objects appearing in different areas of the Graphic Identification
Bar, which is not unusual. For example, the metal content of older pennies compared to new pennies can vary greatly
and aluminium objects such as pull tabs (ring-pulls) may also display similar characteristics. The broken lines on the
Legend Scale, between typical target types, represent the potential for overlap.
As you gain experience with your Safari you will become more familiar with the audio and visual clues that the detector
will provide.

16 Introducing the Detect Screen
Mode Indicator
This icon, next to the corresponding preset
Detect Mode, indicates that a factory preset Mode
has been selected. The detector will apply the factory
determined Discrimination Pattern and audio response
for that Mode.
The other icons that can appear here are:
Target ID Number
When a target is detected while searching, a number
appears on the left side of the Detect Screen
identifying the characteristics of the target.
ID numbers ranging from –10 through to +40 are
Safari’s numerical identification of the type of target
that has been located. Different target types will bring
up different numbers.
Note: You can use these same ID numbers to make
alterations to the Discrimination Pattern (p. 30) and they
will also be useful for recognising common targets.
Depth Gauge
Located in the centre of the Detection Screen is a
vertical bar which predicts the likely depth of
the target.
On shallow targets the cursor is very close to the top
and the bar becomes almost fully shaded, whereas for
deep targets the cursor is quite close to the bottom
and the bar is only partially filled.
– This icon means that a Detect Mode has been
modified but not yet saved.
– This icon means that one of your User Modes
has been selected.

17
Graphic Identification Bar
Located across the base of the screen is a horizontal
bar graph which serves a number of purposes. It
shows you the Discrimination Pattern that has been
set, as well as:
– Dark bars showing the areas of rejection. This means
certain unwanted target types will be rejected (or
ignored) by the detector.
– Light bars showing areas of acceptance. This means
the detector will recognise, and indicate to you,
when certain desirable targets are found.
– When a target is detected, a triangular cursor will
flash three times above a cursor box, the location of
which corresponds to the ID number shown in the
Detect Screen.
Target Icons
Safari will also indicate the likely target type located,
using a select number of generic icons. At times
the Detect Screen may display two icons at once,
indicating that the characteristics of the target located
are similar to that of a number of targets.
Note: Target icons only appear in the Coin and Coin &
Jewellery Detect Modes.
Battery Power Icon
This shows the level of stored power in your battery.
A fully charged battery shows the icon as fully shaded.
As the power in the battery is used the shaded area
depletes until a fully discharged battery is un-shaded.

18
Sweeping the Coil
You will obtain the best performance
when the coil is swept close and parallel
to the ground at all times. This will increase
detection depth and improve the response to
small objects. Avoid excessive brushing of the
coil on the ground. Though the coil assembly
is rigid and durable, sudden jolts or bangs
can cause random signals and inaccurate
target IDs. Careful sweeping will ensure the
detector performs to an optimum level
at all times.
Targets
Metal objects are referred to as targets.
Targets are comprised of ferrous and
nonferrous metals. Ferrous metals are those
containing iron; such as steel, nails and some
types of coins.
Nonferrous metals are those which are not
magnetic, such as gold, silver, copper, bronze
and aluminium.
You may wish to find a range of both ferrous
and nonferrous targets.
Examples of common targets:
Desired high ferrous target – war relic
Undesired high ferrous target – iron nail
Desired nonferrous target – gold coin
Undesired nonferrous target – pull-tab
Practise sweeping the coil over the ground
in a side-to-side motion while slowly walking
forward at the end of each sweep. Slightly
overlap the previous sweep to ensure full
ground coverage. An average sweep speed is
four seconds from left to right to left.
CAUTION: Incorrect coil sweeping can
generate false signals or miss targets.
Detecting Basics

19
Before attempting to recover real targets, it is
important to understand how to interpret the
audio and visual signals of the detector.
Gather a collection of different metal objects,
e.g. various coins, gold and silver jewellery, a
nail, pull-tab, brass button and aluminium foil.
Take the detector outdoors, away from known
sources of EMI and metal objects.
Lay objects in a line, sufficiently spaced apart
to allow the coil to pass between them, as
shown below.
Detector Sounds
Turn the detector On.
The detector may produce False Signals
(Noise) when not over the ground or with the
coil held motionless. These may not be target
signals, but surrounding electromagnetic
interference (EMI). You can minimise these
False Signals by performing a Noise Cancel
(p. 27), or by reducing the Sensitivity (p. 26)
of the detector. It is generally better to try
to reduce False Signals by adjusting Noise
Cancel before resorting to reducing
the Sensitivity.
The constant background ‘hum’ produced by
the detector is called the Threshold (p. 27).
Variations in the Threshold allow you to hear
very small and deep targets. It is also used
to help distinguish between desired and
undesired targets.
Sweep the coil across the targets one at
a time. Observe the LCD and listen to the
sounds of the detector as it passes over
each object. Although the LCD will give you
detailed information about the target, it is
important to pay attention to the difference
in audio response between each of
the objects.
Note: If you are getting signals from a
visibly clear patch of ground, there could be
buried metal objects. Try finding another
area to practise.
Nail Pull-Tab Foil Coins Jewellery
A Simple Detecting Exercise

20 A Simple Detecting Exercise
The Audio Response is the sound produced
by the detector when a target is detected
and not ‘rejected’. When using Coin and Coin
& Jewellery Mode, a highly conductive target
(e.g. a large silver coin) will generally produce
a high-pitched tone and a low conductive
target (e.g. foil) will generally produce a low-
pitched tone. Large targets or targets close to
the ground surface emit louder signals.
When a ‘rejected’ target is detected, the
Threshold ‘blanks’ (becomes silent), indicating
that a target is located underneath the coil,
but has been rejected by the Discrimination
Pattern (p. 30). Blanking is a useful way
of distinguishing between desired and
undesired targets.
Note: As the coil passes over the nail, the
Threshold ‘hum’ momentarily
disappears (blanks).
Large objects close to the coil may Overload
the detectors electronics. When this happens,
Safari displays an Overload message and
emits an Overload sound until the coil is
moved away from the source of the overload.
Overloading is not harmful to the electronics
of the detector.
It is important to understand the sounds
produced when you make a valid or invalid
button press. You will usually encounter these
sounds while adjusting settings via the Main
Menu.
Tip: When detecting do not wear steel-toed
boots or shoes with metal eyelets. These can
send conflicting signals to your detector.
‘Blanking’ (No Sound)
Threshold
Threshold
Target Response
Detector Sounds (cont)

21Detect Modes
There are four factory preset Detect Modes
and four Save Modes available for searching.
Each Detect Mode is customized with the
optimum settings, to allow you to find the
types of objects described by the Detect
Mode name.
The four Detect Modes are:
– Coin – Coin & Jewellery
– Relic – All Metal
In some locations, there may be a specific
pattern to the type of targets found in the
area. For example, an old house or building
site may have areas where a certain junk is
concentrated, or other areas where it is more
likely that coins have been lost. On the beach,
foil and modern coins are more plentiful in
the dry sand, whereas less junk and more
gold jewellery are located in the wet sand.
Due to the different types of targets you may
expect in certain areas, you will often prefer a
different Discrimination Pattern for each area.
With Safari you have the choice to search
in one of the factory preset Discrimination
Patterns, or you can create and save your
own patterns to suit the different areas you
commonly search.
Start – Up
On initial start-up (or after Factory Preset),
your detector will default to the factory Coin
Detect Mode.
To select a different factory preset Detect
Mode button.
The icon next to the corresponding preset
Mode , indicates that a factory preset
Mode has been selected. The detector will
apply the factory determined Discrimination
Pattern and audio response for that Mode.
Note: You cannot change Detect Modes while in
Pinpoint mode.

22 Detect Modes
Coin Mode
This Mode has a Discrimination Pattern that
is best for ignoring a variety of junk targets,
while still being able to detect most coins.
One of the features of Safari is its ability to
vary the tone on the target signal. In Coin
Mode the Audio tone will vary according
to the level of conductivity of the detected
metal. For example, highly conductive metals
like silver, gold and brass will produce a high
pitch tone. Lower conductive items like foil,
nickel, and low carat jewellery will produce a
lower pitched tone.
The preset Discrimination reject settings for
this Mode are –10 to +2 and +6 to +8.
Use: This mode is best used in high trash
areas such as modern parks, sporting
grounds, playgrounds and busy beaches.
It will ignore a large percentage of foil and
ferrous trash.
Note: Some modern coins are produced with
nickel or steel cores and should be considered in
certain regional applications. These coins may
not be detected in Coin Mode.
Coin & Jewellery Mode
This mode has a slightly reduced level of
rejection in its Discrimination Pattern to
enable you to locate coins, as well as gold
jewellery. It allows some coins with a high
ferrous content or low carat jewellery that
may have been discriminated in Coin Mode
to be detected, however, aluminium foil will
also be detected. The Audio tone will vary
depending on the conductivity of the target
in the same fashion as Coin Mode.
The preset Discrimination reject settings for
this mode are –10 to –1.
Tip: Low tone = Low Conductivity content.
High tone = High Conductivity content.
Use: The most common use for this Mode is
for those who are prepared to dig some foil
and pull tabs to find all gold jewellery; ideal
for beaches, old parks, abandoned house
sites, camps, etc.

23
Relic Mode
The Relic Mode has an even lower level of
rejection in its Discrimination Pattern as many
rare and valuable relics can have very low
conductivity, and/or ferrous content. The
Audio tone in Relic Mode is different to Coin
and Coin & Jewellery Detect Modes. It uses
the ferrous (iron) content to determine the
pitch of the Audio tone.
Note: Depending on which Mode you select,
a beep and icon will appear briefly which will
indicate which mode the audio response is in.
This is shown as:
All Metal Mode
All Metal Mode is similar to Relic Mode, the
difference being that no Discrimination is
used in All Metal Mode.
All Metal Mode’s audio response also uses the
object’s ferrous characteristics for producing
the Audio tones, like in Relic Mode.
Tip: This is the best Mode to use when a
maximum target recovery rate is important, like
in some competition hunts or when you are
looking for any and all metals.
In Relic Mode, a target with a high ferrous
content will produce a low tone and a target
with a low ferrous content will produce a
high tone.
The preset reject Discrimination settings for
this Mode are –10 to –3. Because of this,
beach hunters who specifically target gold
jewellery may also prefer to use Relic Mode.
In Relic Mode, the Detect Screen Target Icons
are not shown. Operators using this mode
are more likely to interpret signals using the
Target ID Numbers and audio response only.
or
Conductive
Audio Response
Ferrous
Audio Response

24 Pinpoint
Pinpoint assists you in locating the exact
position of a detected target.
Normally, Safari is a ‘motion’ detector; it must
be moving over a target in order to detect it.
When Pinpoint is activated, Safari will operate
as a non-motion detector; it will produce a
constant audio response while the coil is held
stationary over a target. Pinpoint instructs
the detector to temporarily disengage
Discrimination Patterns. Therefore, all targets
will be detected if underneath the coil.
When Pinpoint is activated, the target icons
on the detect screen will be replaced by a
locator bar graph, as shown below.
3 Taking note of the response, reduce the
span of each successive pass of the coil
until you are confident of the location
of the target. Make a mental note of the
position, or mark a line on the soil with
your shoe or a digging tool.
4 Move to one side so that you can pass the
coil over the target at right angles to your
initial direction.
5 Repeating the above steps in the new
direction will give an exact location to dig.
In Pinpoint, Safari will produce a clear ‘beep’
as the search coil passes directly over the
target. The locator bar graph in the Detect
Screen will also fill out on the screen as the
coil passes directly over the target.
Pinpointing the Target:
1 Once the approximate target location is
known, move the coil to one side of that
location and press Pinpoint.
2 Sweep the coil slowly over the
target location.
Note: Keep the coil parallel to the ground
while Pinpointing.
Tips:
– When in Pinpoint, Safari does not discriminate
between metal targets.
– Always press the Pinpoint button again
when returning to search (do not search in
Pinpoint mode)
– After Pinpointing, and laying the detector
down to dig the target, it is common for
the detector to give an intermittent signal.
Switching out of Pinpoint when digging, then
returning to Pinpoint again if the location
of the target needs to be confirmed can
overcome this.
– Do not press the Pinpoint button when
directly over a target as this may cause a
constant signal.

25Menu
The Safari has the following user
adjustable settings:
– Sensitivity
– Threshold
– Noise Cancel
– Target Volume
– Contrast
– Trash Density
All the settings above are adjusted via the
Menu screen by following these steps:
1 Press the Menu button to access the
Menu screen.
4 Use the – or + arrow buttons to adjust the
setting to the desired value.
5 Press the Menu button again to apply the
setting, and return to the Menu screen to
select another control.
Note: When you have finished making
changes to the Menu settings [this may be
just one or all six], you can press the Accept/
Reject button, or any of the four Mode
buttons, to return to the Detect Screen and
start detecting.
2 To adjust one of these settings, use the – or
+ arrow buttons until the desired selection
is highlighted. To avoid pressing the – or
+ buttons numerous times, you can press
and hold in the button and the selection
will move smoothly, then release the
button when you’ve reached your desired
selection.
3 Press the Menu button again, to activate
the highlighted selection. This will take you
to a screen specific to that setting.

26 Menu
Sensitivity
The Sensitivity control is adjustable to set the
best level of Sensitivity for the environment
being detected. The factory preset setting is
in Auto, and this will self adjust to suit the
conditions you are detecting in. You can also
lock the Sensitivity to suit a particular area by
manually selecting a level between 0 and 20.
Target Volume
The Target Volume control is used to adjust
the maximum volume of the target signal —
not Safari’s overall volume. The Target Volume
range available is 0 to 20, and the preset level
is 20.
A manual Sensitivity setting can be
used in areas with blanket/constant soil
mineralisation, such as beaches or modern
parks. However, Auto Sensitivity is the
preferred setting when detecting areas with
variable soil conditions, until you become
experienced with your detector.
Tip: If you prefer to search in Manual and some
ground noise persists, reduce the Sensitivity level
to the point where false signals cease.
Tip: If your detector is unstable and producing
erratic noises it is recommended to always
perform a Noise Cancel prior to reducing the
Sensitivity of the detector!
Target Volume can be used to prevent signals
from large and shallow items producing very
loud signals that are uncomfortable to your
ears. This should be adjusted to suit your
individual hearing.
Note: The Target Volume control sets the Target
Volume only and does not affect the detector’s
Sensitivity or power.

27
Threshold
The Threshold controls the audible level of
sound during detecting, or the “background
hum”. Most operators find that detecting
with a very low but still audible Threshold is
preferred. A lower level may mask responses
to smaller targets and the higher levels will
make targets difficult to hear. The level preset
by Minelab is 12.
The Threshold range is from 0 to 40.
Tip: The use of headphones will normally allow
the Threshold to be reduced.
Noise Cancel
In many locations where you will be
detecting there maybe electromagnetic
interference (EMI) which can make your
detector unstable. This instability will manifest
as erratic false signals from the detector,
which makes detecting actual targets very
difficult. To eliminate the effects of EMI you
will need to perform a Noise Cancel by either
selecting it in the menu or by simply pressing
the Noise Cancel button on the control panel
(p. 15).
Whilst holding the detector still, press the
Noise Cancel button on the control panel.
Safari will automatically scan and select the
quietest operating frequency and should run
smoothly once complete. This process takes
approximately 20 seconds.
30cm
(12”)
As EMI can vary over time, you may need
to repeat this process over the course of a
detecting session.
Important: While performing a Noise
Cancel it is important to keep the
detector’s coil motionless, and also ensure
that no metallic objects are moved in close
proximity to the detector’s coil.

28 Menu
Contrast
The contrast of the LCD can be adjusted
using the Contrast control.
Trash Density
The Trash Density control will enable you to
optimise your Safari for detecting in locations
with differing amounts of trash content in
the soil.
High is the factory preset setting, suitable
for most common locations where coins
and relics are found, and also areas with
variable ground mineralisation. The High
setting detects targets at a faster rate, so in
areas with a lot of trash, particularly if close
together, the High setting is more likely to
detect the presence of a “good” target in
amongst a number of rejected or
trash targets.
In High setting, when rejecting certain
targets using the Accept/Reject function,
one or two more target ID segments/
numbers may need to be rejected in order to
fully ignore the target. However, if searching
for a specific target, a much narrower “Accept”
pattern is possible, allowing you to ignore
a greater percentage of unwanted trash or
other targets.
High is the preferred setting when detecting
in heavily mineralised or
variable ground.
By adjusting the Contrast, relative to the
current light conditions, you may make the
information on the LCD easier to see.

29
In High setting, Safari’s signal response works
faster to pick out good targets in between all
the trash but requires a wider Discrimination
Pattern to reject a specific target. This is easily
demonstrated by attempting to use the
Accept/Reject function in High setting:
– Sweep the coil over a junk object that you
would like to eliminate, and attempt to
reject it by pressing Accept/Reject.
– Now pass the coil over the target again and
repeat the process
– The Safari will continue to find different
metals in the target and it will show
different IDs.
– It may require you to reject a number of
ID numbers before a specific target is fully
rejected.
High setting can be used with a slightly faster
sweep speed, so is suitable for use during
competition hunts, or in areas where speed of
ground coverage is important.
Trash Density Performance Characteristics
Setting Accept/Reject
Functionality
Detection in average
soils, and low trash sites
Detection in mineralised
soils, and high trash sites
Trash Density
Low Very good Very good Average – may miss
detection of nonferrous
targets
High Average Very good Good
Low is a speciality setting which should
only be used in very clean ground such
as beaches or some inland locations such
as open forests and large fields. In these
locations, Low provides you with the most
precise target ID and allows you to create
a narrow Discrimination Pattern to reject
troublesome trash targets.
The Low Trash Density setting also has a
slightly better depth capability in most soil
conditions, but it is not recommended in
areas where targets may be close together.
The performance characteristics of the two
modes is summarized in the table below:

30 Discrimination
Discrimination (Accept/Reject) Scale
When a target is detected, an ID number
appears on the left hand side of the
screen and a bar and cursor appear in the
Discrimination scale along the bottom of the
screen in the Graphic Identification Bar. In
Coin and Coin & Jewellery Modes a Target
Icon also appears on the right hand side of
the screen.
The location of the target cursor corresponds
to the discrimination rating or ID number of
the object.
When an object is detected, the target cursor
will momentarily flash.
On the Graphic Identification Bar the black
area represents rejected target IDs and the
clear area represents accepted target IDs.
Interpreting target responses
The Target ID Range has 51 numbers
from –10 to +40.
Ferrous (Iron) objects will have IDs
in –10 to –1 range.
Nonferrous (non-iron) objects will have IDs
in the 0 to +40 range.
Objects with higher Conductivity will have
higher IDs.
To Modify the Discrimination Pattern:
The Discrimination Pattern of a factory
preset mode can be modified and saved as a
personal setting, so that your own preferred
Discrimination Pattern is ready for use any
time you wish.
The icon will be displayed on the screen
to indicate that a mode has been temporarily
modified.
There are three methods of modifying the
Discrimination Pattern.
Method 1 –
To reject a specific target/object:
1 Wave the coil over the object. The detector
will move the cursor to indicate the object’s
position on the scale, and the target’s ID
number will appear on the screen.
2 Press the Accept/Reject button to reject the
object’s ID.
3 Wave the coil over the target and check
that it is being rejected. If it still produces
a response, reject its new ID by pressing
Accept/Reject a second time.

31
Method 2 –
To reject a specific Target ID number:
1 In the Detect screen use – and + buttons
to select the ID you want to modify. The
cursor and the Target ID numbers will
indicate the selected ID.
2 Press the Accept/Reject button to either
accept or reject that ID. You will notice
the band on the discrimination scale
will become shaded if rejected or clear if
accepted. The Accept/Reject button will
toggle between accepting and rejecting
targets.
Method 3 –
To accept or reject a large range of
Target IDs:
1 Start from either the first or last number of
the ID band you wish to select.
2 Push and hold both the Accept/Reject
button, and the – or + button until the
selected area is achieved. You will note that
the cursor box on the Graphic Identification
Bar will be shaded when the Accept/Reject
button is in Reject mode and clear when in
the Accept mode.
Tip: The Accept/Reject button is very effective
when in the Low Trash Density setting. The High
setting enhances the detectors ability to pick
out good targets in high concentrations of Iron,
and as a result the Accept/Reject function is not
as accurate. (See p. 28 for more information on
Trash Density)
Once the Discrimination Pattern has been
modified, the icon will appear next to
the Mode button to show that the Detect
Mode has been modified. These changes to
the Discrimination Pattern will be lost if you
select a different Detect Mode. The modified
Discrimination Pattern can be saved as a User
Mode by following the steps in To Create and
Save a User Mode (p. 32).

32
To Create and Save a User Mode:
1 Select the factory preset Detect Mode you
want to alter.
2 Modify the Discrimination Pattern as per
To modify the Discrimination Pattern
on p. 30.
3 Press and hold (approx. 3 seconds), the
appropriate Mode button until the Saved
message is displayed on the screen as
shown below:
4 When the Mode is saved, the icon will
appear next to the Mode button that was
pressed. You can save your personal preset
Mode in any of the four preset locations.
Once a User Mode is saved, simply press
the Mode button to revert to the factory
preset Mode , or press it again to return
to your personal saved Mode.
This allows you to easily toggle between
the two, to compare responses on
various targets.
Note: Any time a different Mode button is
selected, a small sound (loudspeaker) icon is
displayed next to the battery level icon. It will
stay on for ten seconds and will show if the
mode is using Conductive or Ferrous sounds. This
is shown as:
or
Conductive
Audio Response
Ferrous
Audio Response
Discrimination

33Technical Specifications
Transmission Full Band Spectrum (FBS).
Simultaneous Frequency Transmission ranging
from 1.5–100kHz
Coil 11” Double D (waterproof)
Audio Output Internal Speaker or Headphones
Liquid Crystal Display (LCD) 64 x 128 pixels (40mm x 70mm)
Length Collapsed: 1050mm (41”)
Extended: 1370mm (54”)
Detector Weight 1.65kg (3.63lbs) (excluding batteries and
headphones)
Coil Weight (Including Skidplate) 522g (1.15lbs) +/– 10g (0.02lbs)
Operating Temperature Range 0°C to 50°C (32°F to 122°F)
Operating Humidity Range Up to 90% Relative Humidity at 40°C (104°F)
Storage Temperature Range –30°C to 80°C (–22°F to 176°F)
Type Nickel Metal Hydride (NiMH)
Output Voltage 9.6V
Capacity 1600mAh or 1800mAh
Input (Charge) 12V @ 100mA
Charge Time 1600mAh = 18 hours, 1800mAh = 22 hours
Weight 255g (0.56lbs)
Operating Temperature 0 °C to 50 °C (32 °F to 122 °F)
Storage Temperature –30 °C to 80 °C (–22 °F to 176 °F)
Battery Charge Temperature Range 0 °C to 45 °C (32 °F to 113 °F)
Detector
Battery (Accessory Item Only)

34 Factory Presets
All Settings
Setting Title Range Factory Preset My Preferred
Detect Modes
Detect Mode Coin, Coin & Jewellery,
Relic or All Metal
Coin Mode
Discrimination
Coin –10 to +40 –10 to +2 and +6 to +8
Coin & Jewellery –10 to +40 –10 to –1
Relic –10 to +40 –10 to –3
All Metal –10 to +40 Open
Menu Settings
Sensitivity Auto or 0–20 Auto
Threshold 0–40 12
Noise Cancel – Automatic
Target Volume 0–20 20
Contrast 1–20 10
Trash Density Low or High High
To start the detector in the ‘Factory Preset’
mode, (recommended in your first few
outings) press and hold the Power button
(approximately five seconds) until the Factory
Preset message is displayed on the screen.
– Each factory preset Detect Mode has a slot for saving your own User Mode (p. 29).

35
A trowel, knife or small spade are good tools
for recovering targets.
Once a target has been located, clear the
surface of loose material and check again for
a signal. If there is no signal then the target
is amongst the surface material. In this case,
search the surface material until the target
is located. If the target is still in the ground,
Pinpoint its position.
Using a sharp tool, cut a neat portion of grass
or soil and place it on a plastic sheet. This
prevents the material being scattered around
and allows the hole to be refilled quickly.
Dig carefully to avoid defacing or devaluing
the object.
Ensure that no other targets remain, then
refill the hole. All soil and portions of grass on
the plastic sheet should be returned to the
hole as neatly as possible. Step lightly on the
soil to compact it.
Check the hole for the target. If it is not in
the hole, place the detector on the ground
with the coil flat, pick up a handful of soil and
pass it over the coil. Be sure not to wear rings,
bracelets or a watch which will produce a
signal. Repeat this procedure until the target
is located.
Leaving holes, or a scarred area, may result
in action being taken to prevent the use
of metal detectors. Please ensure that you
remove all rubbish. The aim is to leave the
area of ground exactly as you found it.
Recovering the Target

36
A question most new detectorists ask is,
“where do I find treasure”? There are actually
lots of areas in which you can search. It is
best if you research where people have been
in the past, what type of objects they might
have had with them, and hopefully lost. You
can also go to areas people still use on a daily
basis such as the beach or parks, and search
for modern coins and jewellery.
Here is a list of some of the more productive
places to search:
– Your own backyard
– The beach
– Showgrounds & racecourses
– Picnic areas
– Battlefields
– Camping grounds
– Swimming holes
– Parks and playgrounds
– Ghost towns & ancient town sites
– Old homes & public buildings
– Old gold mining sites
– Sports grounds
– School yards and ovals
– Around jetties and piers
– Drive-in theatres
There is a chance of finding buried treasure,
such as coins, relics and jewellery, anywhere
that people have been in the past. In order
to maximise your return, select sites that have
the most potential.
For example, a small park that is just used
as a walkway between houses is likely to
be littered with junk with very few valuable
targets in it. Whereas a larger old park with
picnic tables, playgrounds, etc. would have
had thousands of people sitting around,
playing sports, laying on blankets etc. and
you can almost be certain that there will be
some goodies waiting for your metal detector.
Note: Be sure to obtain the land owners
permission before searching on private property,
and always check local regulations. Your local
Minelab dealer may be able to assist.
Always refill your holes. If you leave the
ground exactly as you found it, you shouldn’t
have any problem detecting the same area in
the future.
Treasure Locations

37
Safari is a high-quality electronic instrument,
finely engineered and packaged in a durable
housing. Taking proper care of your detector
is mostly common-sense.
– Keep the detector clean and dry and avoid
getting sand and grit into the shafts or
fastenings (e.g. yoke bolt and camlocks). Do
not use solvents to clean the detector. Use
a damp cloth with mild soap detergent.
– Ensure the coil cable is in good condition
and not subject to undue stress.
– Flat or faulty batteries cause many detector
problems. Ensure that only quality alkaline
batteries are used, and that they are
replaced when you hear the warning signal
through the headphones or speaker.
– Do not dispose of the optional NiMH
battery pack in fire (contact local authorities
for disposal/recycling). Do not attempt to
disassemble or short circuit the battery
pack.
– Take precautions when transporting or
storing the detector. Although the detector
is constructed from the highest quality
materials and has undergone rigorous
durability tests, the display screen could be
prone to scratching or serious damage if
not treated with due care.
– Please note the following:
– Do not leave the battery pack in the Safari
handle when the detector is not in use
for extended periods. Damage caused
by leaking batteries could be severe and
would void the warranty through user
negligence.
– Do not leave the detector in excessive cold
or heat for longer than necessary. Covering
it when not in use will help protect it.
Avoid leaving it in a closed car boot or
in a car sitting in sunlight. A full-length
detector carry bag is available to protect
the detector when in transit.
– The control box has been designed to resist
moisture, but is not water-proof. Minelab
advises protecting the control box in
extreme conditions. The control box should
not be dropped into water. A control box
cover will give protection against dust, dirt
and light rain.
– Never allow the detector to come into
contact with gasoline or other petroleum-
based liquids.
CAUTION
Detector Care and Safety

38 Troubleshooting
Detector does not start at all – Check the condition of the batteries and battery connections.
– Ensure battery pack is fully inserted, and it has clicked into place.
– If using alkaline batteries, check whether they have been loaded
in the right polarity.
Detector starts, but it switches
off by itself
– Check the condition of the batteries. If necessary, try starting with
batteries known to be in good condition.
– Detector may be too hot. Allow detector to cool down in a
shaded area.
– Try starting the detector with search coil disconnected. If the
detector starts normally, check the state of the coil cable. If it is
damaged, replace the coil. Otherwise return detector for repairs.
No sound – Unplug the headphones. If there is sound in the speaker but not
in the headphones, check the headphones and their connection.
– Check the Target Volume setting (a setting of 0 is silent).
– If there is no sound in the speaker or the headphones but the
detector appears to work normally otherwise, return the detector
for repairs.
Erratic noises – Press the Noise Cancel button.
– Reduce the Sensitivity.
– Change the orientation of the coil to the vertical plane and rotate
to see if there is a position where the noise is loudest.
If this is the case, it means that there is a source of interference
nearby which must be avoided.
– Check battery charge and battery connections.
– Ensure coil connector is tightened firmly.
– Check headphones and their connection.
– Check for sand or grit between coil cover and coil.
No target response – Ensure the detector is turned On.
– Check headphones and their connection.
– Check coil connection.
– Check discrimination level. No signal will be given if target is
within black area of the Graphic Identification Bar.

39
There is a two-year parts and labour warranty
for the electronic control box of Safari. The
coil has a one year parts and labour warranty.
Refer to the supplier or Minelab for service,
either in or out of warranty. The Minelab
warranty does not cover damage caused
by accident, misuse, neglect, alteration,
modifications, or unauthorised service.
For specific details of the Minelab warranty,
please refer to Safari’s ‘Product Warranty Card’.
This warranty is not transferable, nor is it valid
unless the enclosed warranty registration card
is returned to Minelab or your Minelab dealer
within 14 days of the original purchase.
Repairs
In the unfortunate circumstance that the
detector needs to be returned to Minelab for
service, please fill out the Minelab Service
Repair Form (or a photocopy of the same)
and enclose it with the detector.
Please supply as much detail about the
fault as possible. This will assist our service
engineers to rectify the problem quickly
and efficiently.
Warranty and Accessories
Parts and Accessories available
for Safari:
– 8” FBS Coil
– 8” FBS Coil Skidplate
– 11” Coil Skidplate
– Sealed 1800mAh Rechargeable
NiMH SlimPack
– Sealed 1600mAh Rechargeable
NiMH SlimPack
– 12V Car Charger
– Koss UR-30 Headphones
– Tall Man Lower Shaft 610mm (24”)
– Control Box Cover
– Detector Carry Bag
– Minelab Tool & Trash Bag
If you would like to purchase any
accessories for your Safari or any other
Minelab product, please feel free to contact
us directly or via your local Authorised
Minelab dealer.
8” FBS Coil
NiMH SlimPack
12V Car Charger
Koss UR-30 Headphones

40
Owners Name
Address
Telephone Day ( ) Home ( )
Fax ( )
Email
Todays Date
Detector / Model
Serial Number
Purchased From
Purchase Date
Faulty Part(s)
Description of Fault
Please explain how we can replicate the problem in order to fix your detector.
Service Repair Form
cutoutorphotocopy

Item Number: 4901 - 0070
Revision: 1.1
This device complies with
part 15 of the FCC rules
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
Disclaimer:
The Minelab metal detector discussed
in this instruction manual has been
expressly designed and manufactured as
a quality hobbyist metal detector and is
recommended for use in coin, treasure and
general metal detection in nonhazardous
environments. This metal detector has not
been designed for use as a mine detector
or as a live munitions detection tool.
Working for a Cleaner,
Greener Future
For Consumers within the European
Union: Do not dispose of this equipment
in general household waste.
The crossed wheeled bin symbol on this
equipment indicates this unit should
not be disposed of in general household
waste, but recycled in compliance
with local government regulations and
environmental requirements.
Please dispose of this equipment via a
recycling service or centre, or by returning
the unit to the respective Minelab outlet
as appropriate for your unit. This will enable
the equipment to be disposed of in an
environmentally safe manner.
Disposal of unwanted electronic
equipment in land filled waste may
contribute to adverse long term
environmental effect due to the
leaching of contaminating and toxic
substances contained within some
electronic equipment.
© 2008 Minelab Electronics Pty Ltd
This document contains proprietary
information which is protected by
copyright. Apart from any use as
permitted under the Copyright Act
1968, no part may be reproduced by
any process without written permission
from Minelab Electronics Pty Ltd, 118
Hayward Avenue, Torrensville, SA 5031,
Australia.
WARNING. This document contains
Minelab Electronics Pty Ltd rights,
technical data or restricted rights
data, or both. Patents and trademarks
apply. Safari, Serious Detecting and
Minelab are all trademarks of Minelab
Electronics Pty Ltd.
The World Leader in Metal Sensing Technology
From our origins in 1985, Minelab have specialised in advanced electronic
technologies. Our competitive advantage was created almost immediately with a
highly competent and innovative Research and Development team, inspired by the
genius of Mr Bruce Candy.
This commitment to innovation has enabled us to successfully market feature
packed Consumer coin and treasure detectors enjoyed by hobbyists worldwide
as well as high quality gold detectors used by both professionals and amateurs.
Minelab’s advanced technology is also incorporated in detection equipment
designed for military and humanitarian de-mining projects throughout the world.
Today Minelab has manufacturing, distribution and customer service operations
in Australia, Europe and the United States, and is an ISO 9001 Quality Endorsed
Company. ISO 9001 is a worldwide quality standard certification that ensures the
highest level of product quality for our customers.
Please note:
Since there may be a variety of options
available for this detector, equipment
may vary according to the Model or
items ordered with your detector. Certain
descriptions and illustrations may also
differ (in this manual) from the exact Model
that you purchased. In addition, Minelab
reserves the right to respond to ongoing
technical progress by introducing changes
in design, equipment and technical
features at any time.

Minelab Electronics Pty Ltd
PO Box 537, Torrensville Plaza
Adelaide, South Australia, 5031
Australia
Tel: +61 (0) 8 8238 0888
Fax: +61 (0) 8 8238 0890
Email: minelab@minelab.com.au
Minelab International Ltd
Laragh, Bandon
Co. Cork
Ireland
Tel: +353 (0)23 885 2101
Fax: +353 (0)23 885 2106
Email: minelab@minelab.ie
Minelab USA Inc
871 Grier Drive, Suite B1
Las Vegas, Nevada, 89119
USA
Tel: +1 702 891 8809
Fax: +1 702 891 8810
Email: info@minelabusa.com

Safari Instruction

More Related Content

Viewers also liked (6)

Similar to Safari Instruction (20)

Recently uploaded (20)

Safari Instruction