Safety - DROPS Object Prevention Scheme .ppt
- 2. Dropped Object Awareness Over 130 Members Worldwide
- 3. Dropped Object Awareness DROPPED OBJECTS OCCUR EVERYWHERE…
- 5. Dropped Object Awareness Understanding Dropped Object Causes • What Causes Dropped Objects? •Poor hazard and Risk Assessment •Inadequate Design (not addressing Dropped Object potential) •Poor Behaviours (people walking by unsafe acts/conditions) •Inadequate Inspection, Repair and Maintenance •Redundant / Neglected / Homemade Tools and Equipment •Failed Fixtures and Fittings / Corrosion / Vibration •Inappropriate Procedures / Not Following Procedures •Inadequately Stored / Secured Tools and Equipment •Poor Housekeeping •Environment (weather, sea motion) •Planning and Operational Miscalculations •….any others?
- 6. Dropped Object Awareness Understanding Dropped Object Consequences
- 7. Dropped Object Awareness Eliminate, Substitute, Control • Engineered Controls • Procedures • Training / Awareness • Safety Signs & Signals • PPE Preventive Controls may already exist! New Controls must be assessed and monitored. (Change Management)
- 8. Dropped Object Awareness Preventive and Mitigating Controls Preventive Controls PREVENTING AN INCIDENT BY REDUCING THE LIKELIHOOD THAT AN INCIDENT WILL OCCUR • Good Planning (Site Inspection TBRA, PTW) • Primary Fixings / Secondary Retention / Maintenance • Surveys and Inspections • Tools and Equipment Aloft Registers and Log Books • Collision Checklist • Management of Distractions • Observation, STOP, Individual Awareness and Vigilance • DROPS Training Mitigating Controls REDUCING THE CONSEQUENCES OF AN INCIDENT IF PREVENTIVE CONTROLS FAIL OR ARE NOT EFFECTIVE • Safety Securing Systems • Effective Use of Barriers • Restricted Access Areas (Red Zones / No Go Zones) • Use of Approved Drops Tools Kits • PPE (Personal Protective Equipment) • Communications, Standby Persons and PA Warnings DROP