Section 13 - Sub-surface Ready Access
- 1. PREVIOUS SECTION CONTENTS SEARCH NEXT Sub-surface Ready Access Terminal Closures: Section 13 Section 13 – Sub-surface Ready Access Terminal Closures Table of Contents Page Tri-Seal Closure .....................................................................................13-2 Omni-Seal Closure ................................................................................13-3
- 2. PREVIOUS SECTION CONTENTS SEARCH NEXT Tri-Seal Closure The Tri-Seal is designed for butt splice and/or subsurface Features: terminal use. It can be used where the exact number of • Quickly and easily applied service connections are to be made on a continuing basis • Seals out moisture and corrosion such as a new or developing residential area or mobile home park. • Unaffected by soil conditions, even where acid and alkali prevail Flexibility is provided by a unique oval port and two • Clear cap is available for hand holes and allows additional side ports allowing re-entry of additional cables visual inspection or service wires. • Kit comes complete Catalog No. 8000565 shown here 1. Base (two hose clamps included) 3 2 4 2. Clear cap 3. Resin mixer 13 7 4. Polyurethane resin 12 5. Application procedure 6. Pair Protectors 6 7. Emery cloth (for scuffing sheath) 8. Cable bonding braid 9. SURE-GRIP™ Shield Connectors 8 9 10. Sealing tape 5 11. Service wire bond connectors 12. Funnel 13. Gasket 10 14. Gloves (not shown) 11 1 CAPACITY Catalog Standard Number Description Carton Qty. Any number of wires and cables or service wires with a total bundle diameter of 3.5" (89 mm). Each side port Tri -Seal complete 8000565 2 Kits will accommodate a single cable or group of service with resin and bonding wires up to 1/2" (13 mm). Tri-Seal base and cap only with 8000566 2 Kits air flange no resin or bonding Tri-Seal complete with resin 8000568 2 Kits without cable bonding Tri-Seal with connector block 8000574 2 Kits mounting bar 13-2
- 3. PREVIOUS SECTION CONTENTS SEARCH NEXT Sub-surface Ready Access Terminal Closures: Section 13 Omni-Seal Closure Omni-Seal Closure The Omni-Seal is designed specifically for sub-surface Features: ready access terminal use when a large number of drops • Ideal as a sub-surface terminal when drops are prevalent will be used. It can accommodate a looped cable up to 1.6" • Easily applied, easily re-entered in diameter, six 2-pair service wires and four 5-pair service wires. Drop wire application is permitted during the initial • Resin filled base and unique sealing system combine to installation, or at a later date for future construction. provide a watertight seal • Available with either a clear cap for immediate visual The Omni-Seal may incorporate an additional terminal block. inspection, or a black cap for direct buried and serial This terminal block would provide for fixed count use and applications aid in drop wire installation. Drop wires are easily applied • Omni-Seal is durably built to withstand weathering and through the nipples under the base. A pre-stubbed version various soil conditions, even acid and alkali with a 12 pair block mounted to the base is also available. • Kits come complete as ordered • Optional terminal block provides for fixed count and pre-stub use. Kit Materials 1. Base (4 hose clamps included) 3 2. Clear cap with air flange 3. Resin mixer 4. Polyurethane resin (dual component) 2 1 5. Application procedure 6. Pair protectors 4 7. Emery cloth (for scuffing sheath) 12 8. SURE-GRIP™ Shield Connectors 9. Green sealing tape 11 10 10. Black sealing tape 8 14 11. Support bar assembly 9 (terminal block, option) 16 5 12. Funnel 13. Lubricant 15 6 7 14. Plastic gloves 13 15. Bonding braid 16. Plastic rod plugs Catalog Standard Number Description Carton Qty. 8000557 No Blocks 2 Kits 12-pair block, 8000575 1 Kit prepotted stub 13-3