signals and systems lec 12 filtering.pdf

12
Filtering
In discussing Fourier transforms, we developed a number of important prop-
erties, among them the convolution property and the modulation property.
The convolution property forms the basis for the concept of filtering, which
we explore in this lecture. Our objective here is to provide some feeling for
what filtering means and in very simple terms how it might be implemented.
The concept of filtering is a direct consequence of the fact that for linear,
time-invariant systems the Fourier transform of the output is the Fourier
transform of the input multiplied by the frequency response, i.e., the Fourier
transform of the impulse response. Because of this, the frequency content of
the output is the frequency content of the input shaped by this frequency re-
sponse. Frequency-selective filters attempt to exactly pass some bands offre-
quencies and exactly reject others. Frequency-shaping filters more generally
attempt to reshape the signal spectrum by multiplying the input spectrum by
some specified shaping. Ideal frequency-selective filters, such as lowpass,
highpass, and bandpass filters, are useful abstractions mathematically but are
not exactly implementable. Furthermore, even if they were implementable, in
practical situations they may not be desirable. Often frequency-selective fil-
tering is directed at problems where the spectra of the signals to be retained
and those to be rejected overlap slightly; consequently it is more appropriate
to design filters with a less severe transition from passband to stopband.
Thus, nonideal frequency-selective filters have a passband region, a stopband
region, and a transition region between the two. In addition, since they are
only realized approximately, a certain tolerance in gain is permitted in the
passband and stopband.
A very common example of a simple approximation to a frequency-selec-
tive filter is a seriesRC circuit.With the output taken across the capacitor, the
circuit tends to reject or attenuate high frequencies and thus is an approxima-
tion to a lowpass filter. With the output across the resistor, the circuit ap-
proximates a highpass filter, that is, it attenuates low frequencies and retains
high frequencies.
Many simple, commonly used approximations to frequency-selective dis-
crete-time filters also exist. Avery common one is the class ofmoving average
filters. These have a finite-length impulse response and consist of moving
through the data, averaging together adjacent values. Aprocedure ofthis type
12-1

Signals and Systems
12-2
is very commonly used with stock market averages to smooth out (i.e., reject)
the high-frequency day-to-day fluctuations and retain the lower-frequency be-
havior representing long-time trends. Cyclical behavior in stock market aver-
ages might typically be emphasized by an appropriate discrete-time filter with
a bandpass characteristic. In addition to discrete-time moving average filters,
recursive discrete-time filters are very often used as frequency-selective fil-
ters. In the same way that a simple RC circuit can be used as an approxima-
tion to a lowpass or highpass filter, a first-order difference equation is often a
simple and convenient way of approximating a discrete-time lowpass or high-
pass filter.
In this lecture we are able to provide only a very quick glimpse into the
topic of filtering. In all its dimensions, it is an extremely rich topic with many
detailed issues relating to design, implementation, applications, and so on. In
the next and later lectures, the concept offiltering will play a very natural and
important role.
Suggested Reading
Section 6.1, Ideal Frequency-Selective Filters, pages 401-406
Section 6.2, Nonideal Frequency-Selective Filters, pages 406-408
Section 6.3, Examples of Continuous-Time Frequency-Selective Filters De-
scribed by Differential Equations, pages 408-413
Section 6.4, Examples of Discrete-Time Frequency-Selective Filters De-
scribed by Difference Equations, pages 413-422

Filtering
Conve+'d0 - egert
C) .-nm
vr~ -7 -4
I
12-3
MARKERBOARD
12.1
TRANSPARENCY
12.1
Frequency response of
ideal lowpass, high-
pass, and bandpass
continuous-time
filters.

Signals and Systems
12-4
TRANSPARENCY
12.2
ideal lowpass, high-
pass, and bandpass
discrete-time filters.
TRANSPARENCY
12.3
The impulse response
and step response of
an ideal continuous-
time lowpass filter.
H(w)
1
-oc 0 c Li
hq,(t)
W4=;pX IZ
ir11_ 1F /i %-
0 r

Filtering
12-5
H(92)
F2l
-2v -V -9c 0 92.
I F
7r 2v n
hv [n]
s[n] = I hp [k]
k=- o
TRANSPARENCY
12.4
The impulse response
and step response of
an ideal discrete-time
lowpass filter.
IH(w)|I
////////
I"
Passband ITransition |
I
Stopband
- I - ~
0 W,
TRANSPARENCY
12.5
Approximation to a
continuous-time
lowpass filter.
17
1 +51
82

Signals and Systems
12-6
|H (92)1
TRANSPARENCY
12.6 1 + 6 /
Approximation to a
discrete-time lowpass
filter. . "
MARKERBOARD
12.2

Filtering
12-7
20
203 dB
0 dB - - Asymptotic
3 approximation
-20 TRANSPARENCY
_ 12.7
S=- Rc
CBode plots for a first-
-40 order RC circuit
approximation to a
lowpass filter and a
-60 highpass filter.
0.1 /r 1/7- 10/r 100/r
20
Asymptotic
0 dB approximation
I
o -20
0r=RC
-40
-60
0.1 /r
I I I I I I
1/r- 10/r 100/r

Signals and Systems
12-8
TRANSPARENCY
12.8
A three-point moving
average discrete-time
filter.
TRANSPARENCY
12.9
A general discrete-
time moving average
filter.
NON-RECURSIVE (MOVING AVERAGE) FILTERS
Three-point moving average:
y[n] = lx[n-1] +x[n] +x[n+1]1
x[n]
Go*_
I
990
000 0
y[n] = 1 x[n-1] + x[n] + x[n+1]
3
y~nI = N Y~+ x[n-kI
k=- N
M
y[n] = bk x[n-k]
k=-N
-N 0 M

Filtering
12-9
Example 5.7:
x [n]
IMW OW
W w- - **.&-S@S
-2 0 2 nl
X (92)
27r 92
TRANSPARENCY
12.10
Impulse response and
frequency response
for a five-point moving
average lowpass filter
with equal weights.
[Example 5.7 from the
text.]
0.065
0.020
0.025
0.070
o' 0 0.05 0.10
-100
-120 L
-140
-160 I I I ~ I I
~ I~fff~'I
I I I I I I I
TRANSPARENCY
12.11
an optimally designed
moving average filter
with 256 weights.
- 27r
77r,11

Signals and Systems
12-10
TRANSPARENCY
12.12
Difference equation
and block diagram for
a recursive discrete-
time filter.
TRANSPARENCY
12.13
Determination of the
frequency response of
a first-order system
using the properties of
the Fourier transform.
[Example 5.5 from the
text.]
x[n] h[n] y[n]
X(W) H(2) Y(W)
y[n] -
Y(&2) -
ay[n-1] = x[n]
I
a e-iE Y(W) = X(&2)
Y(2) = -a X(92)
H(92) =
1-a e
1
"u[n] + 1-
1-a e-jQ
(Example 5.5)
h [n]

Filtering
12-11
IH(2) 1
h[n] O< a< 1 1a) TRANSPARENCY
12.14
Illustration of the
a) impulse response and
frequency response
2i -n 0 I 27T for a first-order
system.
i H(2) I
h[n] <a<0 -
1 L-
0 7T 2r

MIT OpenCourseWare
http://ocw.mit.edu
Resource: Signals and Systems
Professor Alan V. Oppenheim
The following may not correspond to a particular course on MIT OpenCourseWare, but has been
provided by the author as an individual learning resource.
For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms.

signals and systems lec 12 filtering.pdf

More Related Content

Similar to signals and systems lec 12 filtering.pdf (20)

More from rajd20284 (8)

Recently uploaded (20)

signals and systems lec 12 filtering.pdf