Software Engineering Mcqs.pdf

Skilling.pk____Diya.pk ____WhatsApp: 0332-4646739 WhatsApp: 0314-4646739
0314-4646739 0332-4646739 0336-4646739
0314-4646739 0332-4646739 0336-4646739

03144646739 03324646739 03364646739
Skilling.pk Stamflay.com Diya.pk
Software Engineering Mcqs:
Efficiency in a software product does not include ____________________?
A. responsiveness
B. licensing
C. memory utilization
D. processing time
Identify an ethical dilemma from the situations mentioned below ?
A. Your employer releases a safety-critical system without finishing the testing of
the system
B. Refusing to undertake a project
C. Agreement in principle with the policies of senior management
D. All of the mentioned
In terms of Issues related to professional responsibility____________________?
A. Confidentiality
B. Intellectual property rights
C. Both Confidentiality & Intellectual property rights
D. Managing Client Relationships
Select the incorrect statement: “Software engineers should:
A. not knowingly accept work that is outside your competence.”
B. not use your technical skills to misuse other people’s computers.”
C. be dependent on their colleagues.”
D. maintain integrity and independence in their professional judgment.”
Which of these are not among the eight principles followed by Software Engineering Code of
Ethics and Professional Practice ?
A. PUBLIC
B. PROFESSION
C. PRODUCT
D. ENVIRONMENT
What are attributes of good software ?
A. Software maintainability
B. Software functionality
C. Software development
D. Software maintainability & functionality
Which of these is true ?
A. Generic products and customized products are types of software products
B. Generic products are produced by organization and sold to open market
C. Customized products are commissioned by particular customer
What is a Software ____________________ ?
A. Software is set of programs
B. Software is documentation and configuration of data
C. Software is set of programs, documentation & configuration of data
D. None of the mentioned
Software engineers should not use their technical skills to misuse other people’s
computers.”Here the term misuse refers to ___________________?

03144646739 03324646739 03364646739
A. Unauthorized access to computer material
B. Unauthorized modification of computer material
C. Dissemination of viruses or other malware
Explain what is meant by PRODUCT with reference to one of the eight principles as per the
ACM/IEEE Code of Ethics ?
A. The product should be easy to use
B. Software engineers shall ensure that their products and related modifications
meet the highest professional standards possible
C. Software engineers shall ensure that their products and related modifications satisfy the
client
D. It means that the product designed /created should be easily available
As per an IBM report, “31%of the project get cancelled before they are completed, 53% overrun
their cost estimates by an average of 189% and for every 100 projects, there are 94
restarts”.What is the reason for these statistics ?
A. Lack of adequate training in software engineering
B. Lack of software ethics and understanding
C. Management issues in the company
The reason for software bugs and failures is due to _____________________?
A. Software companies
B. Software Developers
C. Both Software companies and Developers
Which of these does not account for software failure ?
A. Increasing Demand
B. Low expectation
C. Increasing Supply
D. Less reliable and expensive
Which of these software engineering activities are not a part of software processes ?
A. Software dependence
B. Software development
C. Software validation
D. Software specification
Which of these does not affect different types of software as a whole ?
A. Heterogeneity
B. Flexibility
C. Business and social change
D. Security
Which one of the following models is not suitable for accommodating any change ?
A. Build & Fix Model
B. Prototyping Model
C. RAD Model
D. Waterfall Model
Build & Fix Model is suitable for programming exercises of ______________ LOC (Line of Code)?
A. 100-200
B. 200-400
C. 400-1000
D. above 1000
Which model can be selected if user is involved in all the phases of SDLC ?

03144646739 03324646739 03364646739
A. Waterfall Model
B. Prototyping Model
C. RAD Model
D. both Prototyping Model & RAD Model
What is the major drawback of using RAD Model ?
A. Highly specialized & skilled developers/designers are required
B. Increases reusability of components
C. Encourages customer/client feedback
D. Increases reusability of components, Highly specialized & skilled
developers/designers are required
Which one of the following is not a phase of Prototyping Model ?
A. Quick Design
B. Coding
C. Prototype Refinement
D. Engineer Product
RAD Model has__________________?
A. 2 phases
B. 3 phase
C. 5 phases
D. 6 phases
SDLC stands for_____________________?
A. Software Development Life Cycle
B. System Development Life cycle
C. Software Design Life Cycle
D. System Design Life Cycle
The fundamental notions of software engineering does not account for ?
A. Software processes
B. Software Security
C. Software reuse
D. Software Validation
The spiral model was originally proposed by____________________?
A. IBM
B. Barry Boehm
C. Pressman
D. Royce
What is the major advantage of using Incremental Model ?
A. Customer can respond to each increment
B. Easier to test and debug
C. It is used when there is a need to get a product to the market early
D. Easier to test and debug & It is used when there is a need to get a product to the market
early
How is WINWIN Spiral Model different from Spiral Model ?
A. It defines tasks required to define resources, timelines, and other project related
information
B. It defines a set of negotiation activities at the beginning of each pass around the
spiral
C. It defines tasks required to assess both technical and management risks
D. It defines tasks required to construct, test, install, and provide user support
How is Incremental Model different from Spiral Model ?

03144646739 03324646739 03364646739
A. Progress can be measured for Incremental Model
B. Changing requirements can be accommodated in Incremental Model
C. Users can see the system early in Incremental Model
Choose an internal software quality from given below________________________?
A. scalability
B. usability
C. reusability
D. reliability
The RUP is normally described from three perspectives-dynamic, static & practice.What does
static perspective do ?
A. It shows the process activities that are enacted
B. It suggests good practices to be used during the process
C. It shows the phases of the model over time
Which phase of the RUP is used to establish a business case for the system ?
A. Transition
B. Elaboration
C. Construction
D. Inception
Which one of the following is not a fundamental activity for software processes in software
engineering ?
A. Software Verification
B. Software Validation
C. Software design and implementation
D. Software evolution
The longer a fault exists in software__________________?
A. the more tedious its removal becomes
B. the more costly it is to detect and correct
C. the less likely it is to be properly corrected
Selection of a model is based on_____________________?
A. Requirements
B. Development team & Users
C. Project type and associated risk
Which of the following life cycle model can be chosen if the development team has less
experience on similar projects ?
A. Spiral
B. Waterfall
C. RAD
D. Iterative Enhancement Model
Which two of the following models will not be able to give the desired outcome if user’s
participation is not involved?
A. Waterfall & Spiral
B. RAD & Spiral
C. RAD & Waterfall
D. RAD & Prototyping
A company is developing an advance version of their current software available in the market,
what model approach would they prefer ?

03144646739 03324646739 03364646739
A. RAD
B. Iterative Enhancement
C. Both RAD & Iterative Enhancement
D. Spiral
If you were a lead developer of a software company and you are asked to submit a
project/product within a stipulated time-frame with no cost barriers, which model would you
select ?
A. Waterfall
B. Spiral
C. RAD
D. Incremental
Identify a fourth generation language(4GL) from the given below_________________?
A. FORTRAN
B. COBOL
C. Unix shell
D. C++
4GL is an example of ________________ processing?
A. White Box
B. Black Box
C. Functional
D. Both Black Box & Functional
The 4GT Model is a package of _________________?
A. CASE Tools
B. Software tools
C. Software Programs
Arrange the following activities for making a software product using 4GT. i. Design strategy ii.
Transformation into product iii. Implementation iv. Requirement gathering ?
A. 1, 4, 3, 2
B. 4, 3, 1, 2
C. 4, 1, 3, 2
D. 1, 3, 4, 2
Which of the following 4GLs invented at IBM and subsequently adopted by ANSI and ISO as the
standard language for managing structured data?
A. SQL
B. PROLOG
C. C
D. JAVA
Which two models doesn’t allow defining requirements early in the cycle?
A. Waterfall & RAD
B. Prototyping & Spiral
C. Prototyping & RAD
D. Waterfall & Spiral
RUP stands for______________ created by a division of ______________?
A. Rational Unified Program, IBM
B. Rational Unified Process, Infosys
C. Rational Unified Process, Microsoft
D. Rational Unified Process, IBM
The Incremental Model is a result of combination of elements of which two models?

03144646739 03324646739 03364646739
A. Build & FIX Model & Waterfall Model
B. Linear Model & RAD Model
C. Linear Model & Prototyping Model
D. Waterfall Model & RAD Model
The spiral model has two dimensions namely _______________ and _______________?
A. diagonal, angular
B. radial, perpendicular
C. radial, angular
D. diagonal, perpendicular
Identify the disadvantage of Spiral Model?
A. Doesn’t work well for smaller projects
B. High amount of risk analysis
C. Strong approval and documentation control
D. Additional Functionality can be added at a later date
If you were to create client/server applications, which model would you go for ?
A. WINWIN Spiral Model
B. Spiral Model
C. Concurrent Model
D. Incremental Model
Which of the following is not a type of a 4GL? One originating _________________?
A. on Lisp machine
B. on report generators
C. from database query languages
D. from GUI creators
What is a major advantage of using a 4GT Model for producing small scale products,
applications or programs ?
A. Improved productivity of software engineers
B. Reduction in software development time
C. 4GT helped by CASE tools and code generators offers a credible solution to many
software problems
Select the option that suits the Manifesto for Agile Software Development________________?
A. Individuals and interactions
B. Working software
C. Customer collaboration
Which of the following model has a major disadvantage in terms of the coding phase of a
software life cycle model ?
A. Spiral Model
B. Waterfall Model
C. Rad Model
D. 4GT Model
Agile Software Development is based on_________________?
A. Incremental Development
B. Iterative Development
C. Linear Development
D. Both Incremental and Iterative Development
How is plan driven development different from agile development ?
A. Outputs are decided through a process of negotiation during the software
development process

03144646739 03324646739 03364646739
B. Specification, design, implementation and testing are interleaved
C. Iteration occurs within activities
Which of the following does not apply to agility to a software process ?
A. Uses incremental product delivery strategy
B. Only essential work products are produced
C. Eliminate the use of project planning and testing
Four types of change are encountered during the support phase . Which one of the following is
not one that falls into such category ?
A. Translation
B. Correction
C. Adaptation
D. Prevention
Which of the following activities of a Generic Process framework provides a feedback report ?
A. Communication
B. Planning
C. Modeling & Construction
D. Deployment
Purpose of process is to deliver software ___________________?
A. in time
B. with acceptable quality
C. that is cost efficient
D. both in time & with acceptable quality
Which one of the following is not an Umbrella Activity that complements the five process
framework activities and help team manage and control progress, quality, change, and risk ?
A. Reusability management
B. Risk management
C. Measurement
D. User Reviews
The work associated with software engineering can be categorized into three generic
phases,regardless of application area, project size, or complexity namely the_____________
phase which focuses on what, the______________ phase which focuses on how and
the_____________ phase which focuses on change ? i. support ii. development iii. definition
A. 1, 2, 3
B. 2, 1, 3
C. 3, 2, 1
D. 3, 1, 2
Which one of the following is not an application of embedded software product ?
A. keypad control of a security system
B. pattern recognition game playing
C. digital function of dashboard display in a car
D. none of the mentioned
Which one of the following is not a software process quality ?
A. Productivity
B. Portability
C. Timeliness
D. Visibility
_______________ & ________________ are two kinds of software products ?

03144646739 03324646739 03364646739
A. CAD, CAM
B. Firmware, Embedded
C. Generic, Customised
Purpose of process is to deliver software________________?
A. in time
B. with acceptable quality
C. that is cost efficient
D. both in time & with acceptable quality
Which four framework activities are found in the Extreme Programming(XP) ?
A. analysis, design, coding, testing
B. planning, analysis, design, coding
C. planning, design, coding, testing
D. planning, analysis, coding, testing
Is a customer involved test development and validation in XP ?
A. Yes
B. No
C. It may vary from Customer to Customer
In XP an automated unit test framework is used to write tests for a new piece of functionality
before that functionality itself is implemented ____________________?
A. True
B. False
Programmers prefer programming to testing and sometimes they take shortcuts when writing
tests. For example, they may write incomplete tests that do not check for all possible exceptions
may occur ?
A. True
B. False
User requirements are expressed as _______________ in Extreme Programming?
A. implementation tasks
B. functionalities
C. scenarios
Which three framework activities are present in Adaptive Software Development(ASD) ?
A. analysis, design, coding
B. requirements gathering, adaptive cycle planning, iterative development
C. speculation, collaboration, learning
D. all of the mentioned
How many phases are there in Scrum ?
A. Two
B. Three
C. Four
D. Scrum is an agile method which means it does not have phases
A stakeholder is anyone who will purchase the completed software system under development
?
A. True
B. False
Which is one of the most important stakeholder from the following ?
A. Entry level personnel
B. Middle level stakeholder

03144646739 03324646739 03364646739
C. Managers
D. Users of the software
The user system requirements are the parts of which document ?
A. SDD
B. SRS
C. DDD
D. SRD
QFD stands for ________________?
A. quality function design
B. quality function development
C. quality function deployment
Conflicting requirements are common in Requirement Engineering, with each client proposing
his or her version is the right one?
A. True
B. False
A Use-case actor is always a person having a role that different people may play?
A. True
B. False
Which one of the following is not a step of requirement engineering ?
A. elicitation
B. design
C. analysis
D. documentation
How is brainstorming different from JAD ? Brainstorming sessions ?
A. last for about 2-3 hours
B. last for about 2-3 days
C. cover the technology used for the development
FAST stands for___________________?
A. Functional Application Specification Technique
B. Fast Application Specification Technique
C. Facilitated Application Specification Technique
Select the developer-specific requirement ?
A. Portability
B. Maintainability
C. Availability
D. Both Portability and Maintainability
How is throwaway prototype different from evolutionary prototype ?
A. It involves successive steps
B. It involves just one task
C. The prototype is built with the idea that it will eventually be converted into final system
D. It has a shorter development time
QFD works best if it has management commitment?
A. True
B. False
To ensure that a given root definition is rigorous and comprehensive, The Lancaster team
proposed several criteria that are summarized in the mnemonic CATWOE in Soft Systems

03144646739 03324646739 03364646739
Methodology (SSM).Which of the following alphabet is representing an entirely different
meaning to SSM ?
A. C – Customer
B. A – Actor
C. T – Transformation
D. E – ER Model
Keeping the requirements of QFD in mind which of the following is not an example of an
Expected Requirement ?
A. Ease of software installation
B. Overall operational correctness and reliability
C. Specific system functions
D. Quality graphical display
Which of the following Requirement Elicitation Techniques is applicable to messy, changing and
ill-defined problem situations ?
A. Quality Function Deployment (QFD)
B. Prototyping
C. Soft Systems Methodology (SSM)
D. Controlled Requirements Expression (CORE)
Choose the disadvantage of using SSM as an elicitation technique ?
A. It incorporates human element into design
B. SSM is in its infant stage
C. SSM is suitable for new systems
D. Standard methodologies like Role Exploration, Issue Resolution and Reorganization
support SSM
Who controls the FAST (Facilitated Application Specification Techniques) meeting ?
A. System Analyst
B. Scribe
C. Facilitator
D. Manager
How many phases are there in Brainstorming ?
A. Two
B. Three
C. Four
Arrange the steps in order to represent the conducting of Wide band Delphi Technique ?
i. Conduct a group discussion
ii. Conduct another group discussion
iii. Present experts with a problem
iv. Collect expert opinion anonymously
v. Iterate until consensus is reached
vi. Feedback a summary of result to each expert
A. i, iii, ii, iv, v, vi
B. iii, i, ii, iv, v, vi
C. i, ii, iii, iv, vi, v
D. iii, i, iv, vi, ii, v
The requirements that result from requirements analysis are typically expressed from one of
three perspectives or views.WhaT is that perspective or view ?
A. Developer
B. User

03144646739 03324646739 03364646739
C. Non-Functional
D. Physical
Requirements analysis is critical to the success of a development project ?
A. True
B. False
C. Depends upon the size of project
How many phases are there in Requirement Analysis ?
A. Three
B. Four
C. Five
D. Six
Which of the following is not a diagram studied in Requirement Analysis ?
A. Use Cases
B. Entity Relationship Diagram
C. State Transition Diagram
D. Activity Diagram
What are the four dimensions of Dependability ?
A. Usability, Reliability, Security, Flexibility
B. Availability, Reliability, Maintainability, Security
C. Availability, Reliability, Security, Safety
D. Security, Safety, Testability, Usability
How many classification schemes have been developed for NFRs ?
A. Two
B. Three
C. Four
D. Five
Functional requirements capture the intended behavior of the system?
A. True
B. False
“Consider a system where, a heat sensor detects an intrusion and alerts the security company.”
What kind of a requirement the system is providing ?
A. Functional
B. Non-Functional
C. Known Requirement
Which one of the following is a functional requirement ?
A. Maintainability
B. Portability
C. Robustness
Which of the following statements explains portability in non-functional requirements ?
A. It is a degree to which software running on one platform can easily be converted to run
on another platform
B. It cannot be enhanced by using languages, OS’ and tools that are universally available and
standardized
C. The ability of the system to behave consistently in a user-acceptable manner when operating
within the environment for which the system was intended
Which one of the following is a requirement that fits in a developer’s module ?

03144646739 03324646739 03364646739
A. Availability
B. Testability
C. Usability
D. Flexibility
Arrange the tasks involved in requirements elicitation in an appropriate manner ?
i. Consolidation
ii. Prioritization
iii. Requirements Gathering
iv. Evaluation
A. iii, i, ii, iv
B. iii, iv, ii, i
C. iii, ii, iv, i
D. ii, iii, iv, i
What kind of approach was introduced for elicitation and modelling to give a functional view of
the system ?
A. Object Oriented Design (by Booch)
B. Use Cases (by Jacobson)
C. Fusion (by Coleman)
D. Object Modeling Technique (by Rumbaugh)
What is the first step of requirement elicitation ?
A. Identifying Stakeholder
B. Listing out Requirements
C. Requirements Gathering
What are the types of requirement in Quality Function Deployment (QFD) ?
A. Known, Unknown, Undreamed
B. User, Developer
C. Functional, Non-Functional
D. Normal, Expected, Exciting
What are the kinds of actors used in OOSE ?
A. Primary
B. Secondary
C. Ternary
D. Both Primary and Secondary
What requirement gathering method developed at IBM in 1970s is used for managing
requirement elicitation ?
A. JAD
B. Traceability
C. FAST
D. Both JAD and Traceability
Which of the following property does not correspond to a good Software Requirements
Specification (SRS) ?
A. Verifiable
B. Ambiguous
C. Complete
D. Traceable
The SRS is said to be consistent if and only if____________________?
A. its structure and style are such that any changes to the requirements can be made
easily while retaining the style and structure
B. every requirement stated therein is one that the software shall meet

03144646739 03324646739 03364646739
C. every requirement stated therein is verifiable
D. no subset of individual requirements described in it conflict with each other
The SRS document is also known as ________________ specification ?
A. black-box
B. white-box
C. grey-box
Consider the following Statement: “The output of a program shall be given within 10 secs of
event X 10% of the time.”What characteristic of SRS is being depicted here ?
A. Consistent
B. Verifiable
C. Non-verifiable
D. Correct
Consider the following Statement: “The product should have a good human interface.”What
characteristic of SRS is being depicted here ?
A. Consistent
B. Non-Verifiable
C. Correct
D. Ambiguous
Arrange the given sequence to form a SRS Prototype outline as per IEEE SRS Standard?
i. General description
ii. Introduction
iii. Index
iv. Appendices
v. Specific Requirements
A. iii, i, ii,v, iv
B. iii, ii, i, v, iv
C. ii, i, v, iv, iii
D. iii, i, ii
Which of the following is included in SRS ?
A. Cost
B. Design Constraints
C. Staffing
D. Delivery Schedule
Consider the following Statement: “The data set will contain an end of file character.”What
characteristic of SRS is being depicted here ?
A. Consistent
B. Non-verifiable
C. Correct
D. Ambiguous
Which of the following statements about SRS is/are true ?
i. SRS is written by customer
ii. SRS is written by a developer
iii. SRS serves as a contract between customer and developer
A. Only i is true
B. Both ii and iii are true
C. All are true
Which of the following property of SRS is depicted by the statement : “Conformity to a standard
is maintained” ?

03144646739 03324646739 03364646739
A. Correct
B. Complete
C. Consistent
D. Modifiable
Requirements elicitation is a cyclic process_________________?
A. True
B. False
Why is Requirements Elicitation a difficult task ?
A. Problem of scope
B. Problem of understanding
C. Problem of volatility
How many Scenarios are there in elicitation activities ?
A. One
B. Two
C. Three
D. Four
Narrative essay is one of the best types of specification document ?
A. True
B. False
What is the major drawback of CORE ?
A. Requirements are comprehensive
B. NFRs are not given enough importance
C. Role of analyst is passive
How is CORE different from IBIS ?
A. Iterative in nature
B. Redundancies are removed
C. It is simple and an easier method to use
D. Consistency problems are addressed in CORE
How many steps are involved in Feature Oriented Domain Analysis (FODA) ?
A. Two
B. Three
C. Four
D. Five
According to a statistical report: “over 30% of all software projects are cancelled before
completion and over 70% of the remainder fail to deliver expected features”. What must be the
reason for such a situation ?
A. Poor change management
B. Poor requirements management
C. Poor quality control
Which of the following is a requirement management activity ?
A. Investigation
B. Design
C. Construction and Test
Requirements Management has a high initial start-up cost but does not need ongoing funding
throughout a project ?

03144646739 03324646739 03364646739
A. True
B. False
What functionality of Requirement Management Tool (RMT) is depicted by the statement: “the
tool should be able to automatically detect relations between artifacts. For example
information retrieval techniques, monitoring of change history, naming schemas or model
transformations________________________?
A. Automatic Link Detection
B. Documentation Support
C. Graphical Representation
D. Automatic Link Creation and Change
Which of the following is not a Requirement Management workbench tool ?
A. RTM
B. DOORS
C. Rational Suite
D. RDD 100
Requirements traceability is one of the most important part requirement management. It may
also be referred to as the heart of requirement management?
A. True
B. False
Why is Requirements Management Important ? It is due to the changes___________________?
A. to the environment
B. in technology
C. in customer’s expectations
D. in all of the mentioned.
Which two requirements are given priority during Requirement Management of a product ?
A. User and Developer
B. Functional and Non-functional
C. Enduring and Volatile
Requirements Management is a prerequisite for Quality-Oriented Development ?
A. True
B. False
Considering the example of issue/return of a book, cataloging etc. in a library
management.What type of management requirement is being depicted here ?

03144646739 03324646739 03364646739
A. Enduring
B. Volatile
C. Both Enduring & Volatile
What of the following is not an output of a JAD session ?
A. Context Diagrams
B. DFDs
C. ER model
D. UML diagrams
IBIS is a more structured approach than CORE ?
A. True
B. False
Which of the following Requirement Elicitation Techniques removes the poor understanding of
application domain and lack of common terminology between the users and the analysts ?
A. FODA
B. CORE
C. IBIS
D. Prototyping
Which one of the following is not an actor in JAD sessions ?
A. User
B. Tester
C. Scribe
D. Sponsor
Choose a framework that corresponds to Issue Based Information System (IBIS) ?
A. Idea -> Question -> Argument
B. Question -> Idea -> Argument
C. Issue -> Position -> Justification
D. Both Question -> Idea -> Argument and Issue -> Position -> Justification
______________ and ______________ are the two view points discussed in Controlled
Requirements Expression (CORE) ?
A. Functional, Non-Functional
B. User, Developer
C. Known, Unknown
__________________ allows us to infer that different members of classes have some common
characteristics ?
A. Realization
B. Aggregation
C. Generalization
D. dependency
The UML supports event-based modeling using _______________ diagrams?
A. Deployment
B. Collaboration
C. State chart
Which model in system modelling depicts the static nature of the system ?
A. Behavioral Model
B. Context Model
C. Data Model
D. Structural Model

03144646739 03324646739 03364646739
Which level of Entity Relationship Diagram (ERD) models all entities and relationships ?
A. Level 1
B. Level 2
C. Level 3
D. Level 4
The Unified Modeling Language (UML) has become an effective standard for software
modelling.How many different notations does it have ?
A. Three
B. Four
C. Six
D. Nine
Which perspective in system modelling shows the system or data architecture ?
A. Structural perspective
B. Behavioral perspective
C. External perspective
Which model in system modelling depicts the dynamic behaviour of the system ?
A. Context Model
B. Behavioral Model
C. Data Model
D. Object Model
Which of the following diagram is not supported by UML considering Data-driven modeling ?
A. Activity
B. Data Flow Diagram (DFD)
C. State Chart
D. Component
Read More Details about this Mcq
________________ & ________________ diagrams of UML represent Interaction modeling?
A. Use Case, Sequence
B. Class, Object
C. Activity, State Chart
Which of the following statement is incorrect regarding the Class-responsibility-collaborator
(CRC) modeling ?
A. All use-case scenarios (and corresponding use-case diagrams) are organized into
categories in CRC modelling
B. The review leader reads the use-case deliberately
C. Only developers in the review (of the CRC model) are given a subset of the CRC
model index cards
One creates Behavioral models of a system when you are discussing and designing the system
architecture?
A. True
B. False
________________ classes are used to create the interface that the user sees and interacts with
as the software is used ?
A. Controller
B. Entity
C. Boundary
D. Business

03144646739 03324646739 03364646739
A data object can encapsulates processes and operation as well _________________?
A. True
B. False
Model-driven engineering is just a theoretical concept. It cannot be converted into a
working/executable code ?
A. True
B. False
Activity diagrams are used to model the processing of data ?
A. True
B. False
Software evolution does not comprises ?
A. Development activities
B. Negotiating with client
C. Maintenance activities
D. Re-engineering activities
Program modularization and Source code translation are the activities of
____________________?
A. Forward engineering
B. Reverse Engineering
C. Reengineering
D. Reverse Engineering and Reengineering
Identify the correct statement with respect to Evolutionary development ?
A. Evolutionary development usually has two flavors; exploratory development,
and throw-away prototyping
B. Very large projects are usually done using evolutionary development based approach
C. It facilitates easy project management, through the high volume of documentation it
generates
D. Sometimes the construction of a throw-away prototype is not followed by a re-
implementation of the software system using a more structured approach
The two dimensions of spiral model are ______________________?
A. diagonal, angular
B. radial, perpendicular
C. radial, angular
D. diagonal, perpendicular
A sociotechnical system is a system that includes___________________?
A. people
B. software
C. hardware
Which technique is applied to ensure the continued evolution of legacy systems ?
B. Reverse Engineering
C. Reengineering
D. Reverse Engineering and Reengineering
Spiral model was developed by ___________________?
A. Victor Bisili
B. Berry Boehm
C. Bev Littlewood
D. Roger Pressman
Model preferred to create client/server applications is _______________________?

03144646739 03324646739 03364646739
A. WINWIN Spiral Model
B. Spiral Model
C. Concurrent Model
D. Incremental Model
Processes for evolving a software product depend on __________________?
A. Type of software to be maintained
B. Development processes used
C. Skills and experience of the people involved
Reverse engineering is the last activity in a re-engineering project _____________________?
A. True
B. False
The Incremental Model is combination of elements of_____________________?
A. Build & FIX Model & Waterfall Model
B. Linear Model & RAD Model
C. Linear Model & Prototyping Model
D. Waterfall Model & RAD Model
The cost of re-engineering is often significantly less than the costs of developing new software ?
A. True
B. False
Consider an example of a system which has a police command and control system that may
include a geographical information system to provide details of the location of incidents. What
kind of system the example represents ?
A. Complex System
B. Technical computer-based system
C. Sociotechnical System
D. Both Complex and Sociotechnical System
Which property of a sociotechnical system depends on the technical system components, its
operators, and its operating environment ?
A. security
B. usability
C. volume
D. reliability
There are _______________ overlapping stages in the lifetime of large and complex
sociotechnical systems?
A. two
B. three
C. four
D. five
Which property of a sociotechnical system varies depending on how the component assemblies
are arranged and connected ?
A. security
B. usability
C. volume
D. reliability
In a sociotechnical system, you need to consider reliability from perspectives namely ?
A. only software reliability
B. only hardware reliability
C. hardware and software reliability
D. hardware, software and operator reliability

03144646739 03324646739 03364646739
Sociotechnical systems are deterministic ?
A. True
B. False
Human and organizational factors such as organizational structure and politics have a significant
effect on the operation of sociotechnical systems ?
A. True
B. False
Maintenance is classified into how many categories ?
A. two
B. three
C. four
D. five
How many phases are there in Taute Maintenance Model ?
A. six
B. seven
C. eight
D. nine
What are the two ways to view the human error of a sociotechnical system ?
A. hardware and software approach
B. management and users approach
C. person and systems approach
Software Maintenance includes ?
A. Error corrections
B. Enhancements of capabilities
C. Deletion of obsolete capabilities
The modification of the software to match changes in the ever changing environment, falls
under which category of software maintenance ?
A. Corrective
B. Adaptive
C. Perfective
D. Preventive
Selective retest techniques may be more economical than the “retest-all”technique.How many
selective retest techniques are there?
A. two
B. three
C. four
D. five
_______________ measures the ability of a regression test selection technique to handle
realistic applications ?
A. Efficiency
B. Precision
C. Generality
D. Inclusiveness
The process of generating analysis and design documents is known as ___________________?
A. Software engineering
B. Software re-engineering
C. Reverse engineering
D. Re-engineering

03144646739 03324646739 03364646739
What does ACT stands for in In Boehm model for software maintenance ?
A. Actual change track
B. Annual change track
C. Annual change traffic
D. Actual change traffic
What is a software patch ?
A. Required or Critical Fix
B. Emergency Fix
C. Daily or routine Fix
Choose the suitable options with respect to regression testing ?
A. It helps in development of software
B. It helps in maintenance of software
C. It helps in development & maintenance of software
Which one of the following is not a maintenance model ?
A. Waterfall model
B. Reuse-oriented model
C. Iterative enhancement model
D. Quick fix model
What are legacy systems ?
A. new systems
B. old systems
C. under-developed systems
Which of the following manuals is a user documentation ?
A. SRS -Software Requirement Specification
B. SDD -Software Design Document
C. System Overview
How many stages are there in Iterative-enhancement model used during software maintenance
?
A. two
B. three
C. four
D. five
Which of the following is a software process certification ?
A. JAVA Certified
B. IBM Certified
C. ISO-9000
D. Microsoft Certified
Third Party Certification for software standards is based on ___________________?
A. Ul 1998, Second Edition
B. UT 1998, Second Edition
C. Ul 1992, Second Edition
D. Ul 1996, Second Edition
Which standard is followed in aviation industry ?
A. CTRADO-172B
B. RTCADO-178B

03144646739 03324646739 03364646739
C. RTRADO-178B
D. CTCADO-178B
Which of the following is a field related to certification ?
A. Person
B. Process
C. Product
The process of transforming a model into source code is known as___________________?
B. Reverse engineering
C. Re-engineering
D. Reconstructing
Which of the following manuals is not a user documentation ?
A. Beginner’s Guide
B. Installation guide
C. Reference Guide
D. SRS
How many levels, does the DO-178B certification targeted by RTCADO-178B has ?
A. two
B. three
C. four
D. five
CSTE stands for ____________________?
A. Certified Software Technology
B. Certified Software Tester
C. Certified Software Trainee
Which of the following companies provide certifications for their own products ?
A. CISCO
B. ORACLE
C. Microsoft
What are the goals to gain Laboratory Accreditation ?
A. Increase availability of testing services through third-party laboratories
B. Increase availability of testing market to encourage development of software
testing industry
C. Reduce cost by increasing supply of testing services
CSQA stands for __________________?
A. Certified Software Quality Analyst
B. Certified Software Quality Approved
C. Certified Software Quality Acclaimed
National Voluntary Laboratory Accreditation Program approve accreditation in
___________________?
A. Environmental standards
B. Computers and electronics
C. Product testing
Robustness” answers which of the following description ?

03144646739 03324646739 03364646739
A. CASE tools be used to support the process activities
B. Process errors are avoided or trapped before they result in product errors
C. Defined process is acceptable and usable by the engineers responsible for producing the
software
D. Process continues in spite of unexpected problems
In which stage of process improvement bottlenecks and weaknesses are identified ?
A. Process measurement
B. Process analysis
C. Process change
“Understandability” answers which of the following description ?
A. The extent to which the process is explicitly defined
B. Process errors are avoided or trapped before they result in product errors
C. Defined process is acceptable and usable by the engineers responsible for producing the
software product
D. Process continues in spite of unexpected problems
The documentation of a process which records the tasks, the roles and the entities used is
called__________________?
A. Process metric
B. Process analysis
C. Process modelling
What is often undefined and is left to the ingenuity of the project managers and engineers ?
A. Role
B. Exception
C. Activity
D. Process
Prototypes and 4GL business systems are categorized under which process ?
A. Informal
B. Managed
C. Methodical
D. Supported
How many stages are there in process improvement ?
A. three
B. four
C. five
D. six
Process improvement is the set of activities, methods, and transformations that developers use
to develop and maintain information systems ?
A. True
B. False
What is a tangible output of an activity that is predicted in a project plan ?
A. Deliverable
B. Activity
C. Condition
D. Process
Which of the following is not a part of process change ?
A. Introducing new practices, methods or processes
B. Introducing new team members to existing project

03144646739 03324646739 03364646739
C. Introducing or removing deliverable
D. Introducing new roles or responsibilities
It is always best to start process analysis with a new test model ?
A. True
B. False
The CMMI assessment is based on a x-point scale. What is the value of x ?
A. 0
B. 2
C. 4
D. 6
Which of the following is not a SQA plan for a project ?
A. evaluations to be performed
B. amount of technical work
C. audits and reviews to be performed
D. documents to be produced by the SQA group
____________ states that, where appropriate, adequate statistical techniques are identified and
used to verify the acceptability of process capability and product characteristics?
A. ISO 9001
B. ISO 9000-4
C. CMM
Which of the following requires design control measures, such as holding and recording design
reviews and qualification tests ?
A. CMM
B. ISO 9001
C. ISO 9000-3
Which of the following is not a maturity level in CMM ?
A. Design
B. Repeatable
C. Managed
D. Optimizing
CO policy in CMM means___________________?
A. The leadership practices in Commitment to Perform
B. The organizational structure (groups) practices in Ability to Perform
C. The policy practices in Commitment to Perform
D. The planning practices in Commitment to Perform
The ISO 9000 series of standards is a program that can be used for external quality assurance
purposes ?
A. True
B. False
What is not included in prevention costs ?
A. quality planning
B. formal technical reviews
C. test equipment
D. equipment calibration and maintenance
The Capability Maturity Model (CMM) is a continuous model ?
A. True
B. False
Which of the following is not included in failure costs ?

03144646739 03324646739 03364646739
A. rework
B. repair
C. failure mode analysis
Degree to which design specifications are followed in manufacturing the product is
called_________________?
A. Quality Control
B. Quality of conformance
C. Quality Assurance
Which requirements are the foundation from which quality is measured ?
A. Hardware
B. Software
C. Programmers
Which of the following is not included in External failure costs ?
A. testing
B. help line support
C. warranty work
D. complaint resolution
Who identifies, documents, and verifies that corrections have been made to the software ?
A. Project manager
B. Project team
C. SQA group
CMM stands for_____________________?
A. Capability Management Module
B. Conservative Maturity Model
C. Capability Maturity Module
D. Capability Maturity Model
ISO 9001 is not concerned with _______________ of quality records?
A. collection
B. maintenance
C. verification
D. dis-positioning
The CMM emphasizes____________________?
A. continuous process improvement
B. the need to record information
C. the need to accept quality system
In CMM, the life cycle activities of requirements analysis, design, code, and test are described
in_________________________?
A. Software Product Engineering
B. Software Quality Assurance
C. Software Subcontract Management
D. Software Quality Management
According to ISO 9001, the causes of nonconforming product should
be____________________?
A. deleted
B. eliminated

03144646739 03324646739 03364646739
C. identified
D. eliminated and identified
The primary objective of formal technical reviews is to find _________________ during the
process so that they do not become defects after release of the software?
A. errors
B. equivalent faults
C. failure cause
Which of the following is not an appraisal cost in SQA ?
A. inter-process inspection
B. maintenance
C. quality planning
D. testing
Which regression test selection technique exposes faults caused by modifications ?
A. Efficiency
B. Precision
C. Generality
D. Inclusiveness
Regression testing is a very expensive activity?
A. True
B. False
Which selective retest technique selects every test case that causes a modified program to
produce a different output than its original version?
A. Coverage
B. Minimization
C. Safe
D. Maximization
What type of software testing is generally used in Software Maintenance ?
A. Regression Testing
B. System Testing
C. Integration Testing
D. Unit Testing
Which of the following terms is a measure of the probability that the system will cause an
accident ?
A. Risk
B. Hazard probability
C. Accident
D. Damage
A characteristic of a software system that can lead to a system error is known as
_____________________ ?
A. Human error or mistake
B. System fault
C. System error
D. System failure
An aircraft engine normally includes automatic fire extinguishers.What kind of dependability
and security issue the example states ?
A. Hazard avoidance
B. Damage limitation
C. Hazard detection
D. Hazard detection and removal

03144646739 03324646739 03364646739
A chemical plant system may detect excessive pressure and open a relief valve to reduce these
pressures before an explosion occurs. What kind of dependability and security issue the
example states ?
A. Hazard avoidance
B. Damage limitation
C. Hazard detection
D. Hazard detection and removal
The safety of a system is a system attribute that reflects the system’s ability to operate,
normally or abnormally, without injury to people or damage to the environment ?
A. True
B. False
An erroneous system state that can lead to system behavior that is unexpected by system users
is known as________________?
B. System fault
C. System error
D. System failure
An assessment of the worst possible damage that could result from a particular hazard is known
as _________________?
A. Risk
B. Hazard probability
C. Hazard severity
D. Mishap
A password checking system that disallows user passwords that are proper names or words that
are normally included in a dictionary is an example of ________________ with respect to
security systems?
A. risk
B. control
C. attack
D. asset
A weakness in a computer-based system that may be exploited to cause loss or harm is known
as ?
A. Vulnerability
B. Attack
C. Threat
D. Exposure
Consider a case where the system is unavailable and cannot deliver its services to users. What
type of failure is being described here ?
A. Loss of service
B. Incorrect service delivery
C. System/data corruption
An event that occurs at some point in time when the system does not deliver a service as
expected by its users is called __________________?
B. System fault
C. System error
D. System failure
How many stages are there in Risk-driven requirements specification ?

03144646739 03324646739 03364646739
A. three
B. four
C. five
D. six
POFOD stands for___________________?
A. Possibility of failure of data
B. Probability of failure of data
C. Possibility of failure on demand
D. Probability of failure on demand
Which of the following is not a functional reliability requirement for a system ?
A. Checking requirements
B. Recovery requirements
C. Redundancy requirements
D. Ambiguous requirements
Which reliability requirements are concerned with maintaining copies of the system ?
A. Checking requirements
B. Recovery requirements
C. Redundancy requirements
D. Ambiguous requirements
To specify security requirements, one should identify the risks that are to be dealt with ?
A. True
B. False
Which reliability metric sets out the probable number of system failures that are likely to be
observed relative to a certain time period ?
A. POFOD
B. ROCOF
C. AVAIL
At which stage of risk analysis specification, the additional security requirements take account
of the technologies used in building the system and system design and implementation
decisions ?
A. Preliminary risk analysis
B. Life-cycle risk analysis
C. Operational risk analysis
Consider a case where the failure of the system causes damage to the system itself or it data.
What type of failure is being described here ?
A. Loss of service
B. Incorrect service delivery
C. System/data corruption
Which of the following examples does not involve dependability engineering ?
A. Medical Systems
B. Power Systems
C. Library Management
D. Telecommunications
Which process characteristic with respect to Dependability Engineering is mentioned by the
statement: “The process should be understandable by people apart from process participants”
?

03144646739 03324646739 03364646739
A. Diverse
B. Documentable
C. Auditable
Which of the following is a Strategy to achieve Software diversity ?
A. Different programming languages
B. Different design methods and tools
C. Explicit specification of different algorithms
What is the term for development process organised such that faults in the system are detected
and repaired before delivery to the customer ?
A. Fault Avoidance
B. Fault detection
C. Fault tolerance
What is the term for a system that is designed such that the faults in the delivered software do
not result in system failure ?
A. Fault Avoidance
B. Fault detection
C. Fault tolerance
The use of a well-defined, repeatable process is essential if faults in a system are to be
minimized ?
A. True
B. False
What is a Range check ?
A. Check that the input does not exceed some maximum size e.g. 40 characters for a
name
B. Check that the input falls within a known range
C. Use information about the input to check if it is reasonable rather than an extreme value
Exception handling is a mechanism to provide some fault avoidance ?
A. True
B. False
Which of the following is not a Protection system ?
A. System to stop a train if it passes a red light
B. System to indicate not returning of the library book
C. System to shut down a reactor if temperature/pressure are too high
Which of the following is a bad practice of Dependable programming ?
A. Limit the visibility of information in a program
B. Check array bounds
C. Check all inputs for validity
Which of the following is a layer of protection for Security ?
A. Platform-level protection
B. Application-level protection
C. Record-level protection
What are security controls ?

03144646739 03324646739 03364646739
A. Controls that are intended to ensure that attacks are unsuccessful
B. Controls that are intended to detect and repel attacks
C. Controls that are intended to support recovery from problems
Controls that are intended to ensure that attacks are unsuccessful is analogous to
______________ in dependability engineering?
A. Fault avoidance
B. Fault tolerance
C. Fault detection
D. Fault Recovery
Security engineering is only concerned with maintenance of systems such that they can resist
malicious attacks ?
A. True
B. False
What is Life cycle risk assessment ?
A. Risk assessment before the system has been deployed
B. Risk assessment while the system is being developed
C. All of the mentioned
A system resource that has a value and has to be protected is known as
________________________?
A. Asset
B. Control
C. Vulnerability
Circumstances that have potential to cause loss or harm is known as___________________?
A. Attack
B. Threat
C. Vulnerability
D. Control
An impersonation of an authorised user is an example of a security threat ?
A. True
B. False
Choose the fault class in which the following automated static analysis check would fall:”Pointer
Arithmetic” ?
A. Storage management faults
B. Data Faults
C. Input/Output Faults
D. Interface faults
Static analysis is now routinely used in the development of many safety and security critical
systems?
A. True
B. False
Choose the fault class in which the following automated static analysis check would fall:
“Unreachable code”?
A. Control Faults
B. Data Faults
D. Interface faults
Which level of Static Analysis allows specific rules that apply to a program to be checked ?

03144646739 03324646739 03364646739
A. Characteristic error checking
B. User-defined error checking
C. Assertion checking
Choose the fault class in which the following automated static analysis check would fall:”Non-
usage of the results of functions”?
A. Storage management faults
B. Data Faults
D. Interface faults
Choose the fault class in which the following automated static analysis check would
fall:”Variables declared but never used”?
A. Control Faults
B. Data Faults
D. Interface faults
Select the disadvantage of using Formal methods ___________________?
A. Concurrent systems can be analysed to discover race conditions that might lead to
deadlock
B. Producing a mathematical specification requires a detailed analysis of the requirements
C. They require the use of specialised notations that cannot be understood by domain
experts
The records of each patient that is receiving or has received treatment resembles which security
concept ?
A. Asset
B. Threat
C. Vulnerability
D. Control
Which of the following is incorrect with respect to Model Checking ?
A. Model checking is particularly valuable for verifying concurrent systems
B. Model checking is computationally very inexpensive
C. The model checker explores all possible paths through the model
Which of the following is a technique covered in Static Analysis ?
A. Formal verification
B. Model checking
C. Automated program analysis
Static Analysis involves executing a program ?
A. True
B. False
In Design phase, which is the primary area of concern ?
A. Architecture
B. Data
C. Interface
In the Analysis phase, the development of the ______________ occurs, which is a clear
statement of the goals and objectives of the project ?

03144646739 03324646739 03364646739
A. documentation
B. flowchart
C. program specification
D. design
Who designs and implement database structures ?
A. Programmers
B. Project managers
C. Technical writers
D. Database administrators
Which is the first step in the software development life cycle ?
A. Analysis
B. Design
C. Problem/Opportunity Identification
D. Development and Documentation
A step by step instruction used to solve a problem is known as ___________________?
A. Sequential structure
B. A List
C. A plan
D. An Algorithm
Actual programming of software code is done during the __________________ step in the
SDLC?
A. Maintenance and Evaluation
B. Design
C. Analysis
D. Development and Documentation
Which tool is use for structured designing ?
A. Program flowchart
B. Structure chart
C. Data-flow diagram
D. Module
_______________ is the process of translating a task into a series of commands that a computer
will use to perform that task ?

03144646739 03324646739 03364646739
A. Project design
B. Installation
C. Systems analysis
D. Programming
Debugging is_________________?
A. creating program code
B. finding and correcting errors in the program code
C. identifying the task to be computerized
D. creating the algorithm
The importance of software design can be summarized in a single word which
is___________________?
A. Efficiency
B. Accuracy
C. Quality
D. Complexity
Which of the property of software modularity is incorrect with respect to benefits software
modularity ?
A. Modules are robust
B. Module can use other modules
C. Modules Can be separately compiled and stored in a library
D. Modules are mostly dependent
Which of the following is the best type of module coupling ?
A. Control Coupling
B. Stamp Coupling
C. Data Coupling
D. Content Coupling
Java packages and Fortran subroutine are examples of__________________________?
A. Functions
B. Modules
C. Classes
D. Sub procedures
__________________ is a measure of the degree of interdependence between modules ?
A. Cohesion
B. Coupling
C. None of the mentioned
Which of the following is the worst type of module coupling ?
A. Control Coupling
B. Stamp Coupling
C. External Coupling
D. Content Coupling
Which of the following is the best type of module cohesion ?
A. Functional Cohesion
B. Temporal Cohesion
C. Functional Cohesion
D. Sequential Cohesion
In what type of coupling, the complete data structure is passed from one module to another ?
A. Control Coupling
B. Stamp Coupling

03144646739 03324646739 03364646739
C. External Coupling
D. Content Coupling
Which of the following is a complementary approach to function-oriented approach ?
A. Object oriented analysis
B. Object oriented design
C. Structured approach
D. Both Object oriented analysis and design
If all tasks must be executed in the same time-span, what type of cohesion is being exhibited ?
A. Functional Cohesion
D. Sequential Cohesion
Which of the following is the worst type of module cohesion ?
A. Logical Cohesion
D. Coincidental Cohesion
Choose the option that does not define Function Oriented Software Design ?
A. It consists of module definitions
B. Modules represent data abstraction
C. Modules support functional abstraction
Which of the following is/are true with respect to functions ?
A. A function such as “search-book” is represented using a circle
B. Functions represent some activity
C. Function symbol is known as a process symbol or a bubble in DFD
Function-oriented design techniques starts with functional requirements specified
in_______________?
A. SDD
B. SRS
Which of the following is not a use of a CASE tool ?
A. Support structured analysis and design (SA/SD)
B. Maintains the data dictionary
C. Checks whether DFDs are balanced or not
D. It complies with the available system
Structured Analysis is based on the principles of___________________?
A. Top-down decomposition approach
B. Divide and conquer principle
C. Graphical representation of results using DFDs
In DFDs, user interactions with the system is denoted by ____________________?
A. Circle
B. Arrow
C. Rectangle
D. Triangle
What DFD notation is represented by the Rectangle ?

03144646739 03324646739 03364646739
A. Transform
B. Data Store
C. Function
SA/SD features are obtained from which of the methodologies ?
A. Constantine and Yourdon methodology
B. DeMarco and Yourdon methodology
C. Gane and Sarson methodology
To arrive at a form which is suitable for implementation in some programming language is the
purpose of_______________?
A. Structured Analysis (SA)
B. Structured Design (SD)
C. Detailed Design (DD)
Which of the following is not an activity of Structured Analysis (SA) ?
A. Functional decomposition
B. Transformation of a textual problem description into a graphic model
C. All the functions represented in the DFD are mapped to a module structure
The context diagram is also known as __________________?
A. Level-0 DFD
B. Level-1 DFD
C. Level-2 DFD
Which of the following is a function of CASE Tool ?
A. Supporting Structured analysis and design (SA/SD)
B. Maintaining the data dictionary
C. Checking whether DFDs are balanced or not
A directed arc or line in DFD represents_________________?
A. Data Store
B. Data Process
C. Data Flow
Data Store Symbol in DFD represents a_______________?
A. Physical file
B. Data Structure
C. Logical file
What encapsulates both data and data manipulation functions ?
A. Object
B. Class
C. Super Class
D. Sub Class
Which of the following points related to Object-oriented development (OOD. is true ?
A. OOA is concerned with developing an object model of the application domain
B. OOD is concerned with developing an object-oriented system model to implement
requirements

03144646739 03324646739 03364646739
Which of the following is not an operation as per OOD algorithms and data structures ?
A. operations that manipulate data in some way
B. operations that perform a computation
C. operations that check for syntax errors
D. operations that monitor an object for the occurrence of a controlling event
A design description in OOD includes___________________?
A. Protocol Description
B. Implementation Description
C. Type Description
D. both Protocol and Implementation Description
A design description of an object is known as a class__________________?
A. instance
B. object
C. case
D. both instance and object
Which of the following early OOD methods incorporates both a “micro development process”
and a “macro development process.” ?
A. Booch method
B. Rumbaugh method
C. Wirfs-Brock method
D. Coad and Yourdon method
Which of the following is conceptually similar to objects ?
A. PACKAGE
B. PROC
C. PRIVATE
Grady Booch, James Rumbaugh, and Ivar Jacobson combined the best features of their
individual object-oriented analysis into a new method for object oriented design known as
_____________________?
A. HTML
B. XML
C. UML
D. SGML
How many layers are present in the OO design pyramid ?
A. three
B. four
C. five
D. one
Objects are executed _____________________?
A. sequentially
B. in Parallel
C. sequentially & Parallel
Which of the following is a mechanism that allows several objects in an class hierarchy to have
different methods with the same name ?
A. Aggregation
B. Polymorphism

03144646739 03324646739 03364646739
C. Inheritance
How is generalization implemented in Object Oriented programming languages ?
A. Inheritance
B. Polymorphism
C. Encapsulation
D. Abstract Classes
Which of the following is a disadvantage of OOD ?
A. Easier maintenance
B. Objects may be
understood as stand-alone entities
C. Objects are potentially reusable components
Object that collects data on request rather than autonomously is known
as_________________?
A. Active Object
B. Passive Object
C. Multiple instance
Which of the following is not an information domain required for determining function point in
FPA ?
A. Number of user Input
B. Number of user Inquiries
C. Number of external Interfaces
D. Number of errors
Which of the following is the task of project indicators ?
A. help in assessment of status of ongoing project
B. track potential risk
C. help in assessment of status of ongoing project & track potential risk
The intent of project metrics is_____________________?
A. minimization of development schedule
B. for strategic purposes
C. assessing project quality on ongoing basis
D. minimization of development schedule and assessing project quality on ongoing
basis
Defects removal efficiency (DRE)depends on ______________________?
A. E – errors found before software delivery
B. D – defects found after delivery to user
C. Both E and D
D. Varies with project
In size oriented metrics, metrics are developed based on the _____________________?
A. number of Functions
B. number of user inputs
C. number of lines of code
D. amount of memory usage
A graphical technique for finding if changes and variation in metrics data are meaningful is
known as_________________?
A. DRE (Defect Removal Efficiency)
B. Function points analysis

03144646739 03324646739 03364646739
C. Control Chart
Which of the following is an indirect measure of product ?
A. Quality
B. Complexity
C. Reliability
D. All of the Mentioned
Which of the following does not affect the software quality and organizational performance ?
A. Market
B. Product
C. Technology
D. People
Which of the following is not a direct measure of SE process ?
A. Efficiency
B. Cost
C. Effort Applied
Usability can be measured in terms of_________________?
A. Intellectual skill to learn the system
B. Time required to become moderately efficient in system usage
C. Net increase in productivity
Which of the following web engineering metric measures the extent of relatedness between
two or more web pages ?
A. Number of Static Content Objects
B. Number of Dynamic Content Objects
C. Web Page Similarity
D. Number of Internal Page Links
Link based measures rely on _____________ structure of a web graph to obtain related pages?
A. Embedded
B. Hyperlink
C. Dynamic
Number of dynamic web pages provides an idea about____________ for a web page that is to
be built?
A. size
B. complexity
C. effort
Which metric gives the idea about the contents on a web page ?
A. Word Token
B. Word Count
C. Word Size
D. Word Length
How is the complexity of a web page related to link count ?
A. Directly
B. Indirectly
C. No relation

03144646739 03324646739 03364646739
Which of the following is not a classification of the web engineering metric, Web Page Similarity
?
A. Content based
B. Link based
C. Usage based
D. Traffic based
Statement and branch coverage metrics are part of______________________?
A. Analysis Model
B. Testing
C. Design Model
D. Source Code
Function Point Computation is given by the formula___________________?
A. FP = [count total * 0.65] + 0.01 * sum(Fi)
B. FP = count total * [0.65 + 0.01 * sum(Fi)].
C. FP = count total * [0.65 + 0.01] * sum(Fi)
D. FP = [count total * 0.65 + 0.01] * sum(Fi)
Structural complexity of a module i is given as S(i) = f*f (i). What does f symbolizes here ?
A. “fan check-out” of module i
B. “fan check-in” of module i
C. “fan in” of module i
D. “fan out” of module i
SMI = [Mt – (Fa + Fc + Fd)]/Mt. Here Mt is the number of modules______________?
A. in the current release
B. in the current release that have been changed
C. from the preceding release that were deleted in the current release
Architectural Design Metrics are ______________ in nature ?
A. Black Box
B. White Box
C. Gray Box
D. Green Box
How many Information Domain Values are used for Function Point Computation ?
A. three
B. four
C. five
D. six
Which of the following is not a metric for design model ?
A. Interface design metrics
B. Component-level metrics
C. Architectural metrics
D. Complexity metrics
Which of the following is not a web engineering project metric ?
A. Number of Static Content Objects
B. Number of Dynamic Content Objects
C. Number of Inherited Objects
D. Word Count
Function Points in software engineering was first proposed by_______________?
A. Booch
B. Boehm

03144646739 03324646739 03364646739
C. Albrecht
D. Jacobson
SMI stands for_______________?
A. Software Mature Indicator
B. Software Maturity Index
C. Software Mature Index
D. Software Maturity Indicator
The amount of time that the software is available for use is known as_________________?
A. Reliability
B. Usability
C. Efficiency
D. Functionality
Usability in metric analysis is defined as the degree to which the
software_________________?0
A. stated needs
B. is easy to use
C. makes optimal use of system resources
Identify the correct option with reference to Software Quality Metrics ?
A. Integrity = [Sigma(1 – threat)] * (1 – security)
B. Integrity = [1 – Sigma(threat)] * (1 – security)
C. Integrity = [1 – threat * Sigma(1 – security)]
D. Integrity = Sigma[1 – threat * (1 – security)]
Percentage of modules that were inspected is a part of__________________?
A. Product Metrics
B. Process Metrics
C. Project Metrics
The arc-to-node ratio is given as r = a/n. What does ‘a’ represent in the ratio ?
A. maximum number of nodes at any level
B. longest path from the root to a leaf
C. number of modules
D. lines of control
MTTC falls the the category of____________________?
A. correctness
B. integrity
C. maintainability
Which of the following describes”Is-a-Relationship” ?
A. Aggregation
B. Inheritance
C. Dependency
Which of the following is not categorized under Component-Level Design Metrics ?
A. Complexity Metrics
B. Cohesion Metrics
C. Morphology Metrics
D. Coupling Metrics
Choose the incorrect statement in terms of Objects ?

03144646739 03324646739 03364646739
A. Objects are abstractions of real-world
B. Objects can’t manage themselves
C. Objects encapsulate state and representation information
Which of the following is not categorized under Product Operation of McCall’s Software Quality
Factors ?
A. Flexibility
B. Reliability
C. Usability
D. Integrity
Size and Complexity are a part of____________________?
A. Product Metrics
B. Process Metrics
C. Project Metrics
Number of errors found per person hours expended is an example of a____________________?
A. measurement
B. measure
C. metric
Cost and schedule are a part of_________________________?
A. Product Metrics
B. Process Metrics
C. Project Metrics
Identify the sub-process of process improvement ___________________?
A. Process introduction
B. Process analysis
C. De-processification
D. Process distribution
Which of the following is not project management goal ?
A. Keeping overall costs within budget
B. Delivering the software to the customer at the agreed time
C. Maintaining a happy and well-functioning development team
D. Avoiding customer complaints
Which of the following is incorrect activity for the configuration management of a software
system ?
A. Internship management
B. Change management
C. Version management
D. System management
What describes the data and control to be processed ?
A. Planning process
B. Software scope
C. External hardware
D. Project complexity
The process each manager follows during the life of a project is known as
___________________?
A. Project Management
B. Manager life cycle

03144646739 03324646739 03364646739
C. Project Management Life Cycle
Quality planning is the process of developing a quality plan for__________________?
A. team
B. project
C. customers
D. project manager
Which of the following is an important factor that can affect the accuracy and efficacy of
estimates ?
A. Project size
B. Planning process
C. Project complexity
D. Degree of structural uncertainty
Which of the following is/are main parameters that you should use when computing the costs
of a software development project ?
A. travel and training costs
B. hardware and software costs
C. effort costs (the costs of paying software engineers and managers)
A 66.6% risk is considered as__________________?
A. very low
B. low
C. moderate
D. high
Which of the following is not considered as a risk in project management ?
A. Specification delays
B. Product competition
C. Testing
D. Staff turnover
The project planner examines the statement of scope and extracts all important software
functions which is known as___________________?
A. Association
B. Decomposition
C. Planning process
Which of the following is not an option to achieve reliable cost and effort estimate ?
A. Base estimates on similar projects that have already been completed
B. Use one or more empirical models for software cost and effort estimation
C. Use relatively simple decomposition techniques to generate project cost and effort
estimates
D. The ability to translate the size estimate into human effort, calendar time, and
dollars
What can be used to complement decomposition techniques and offer a potentially valuable
estimation approach in their own right ?
A. Automated estimation tools
B. Empirical estimation models
C. Decomposition techniques
D. Both Automated estimation tools and Empirical estimation models
Which of the following are parameters involved in computing the total cost of a software
development project ?

03144646739 03324646739 03364646739
A. Hardware and software costs
B. Effort costs
C. Travel and training costs
Which of the following is not achieved by an automated estimation tools ?
A. Predicting staffing levels
B. Predicting software cost
C. Predicting software schedules
D. Predicting clients demands
What is related to the overall functionality of the delivered software ?
A. Function-related metrics
B. Product-related metrics
C. Size-related metrics
The environment that supports the software project is called_______________________?
A. CLSS
B. SEE
C. FAST
D. CBSE
CLSS stands for_____________________?
A. conveyor line sorting system
B. conveyor line sorting software
C. conveyor line sorting speed
D. conveyor line sorting specification
A number of independent investigators have developed a team-oriented approach to
requirements gathering that can be applied to establish the scope of a project called ?
A. JAD
B. CLASS
C. FAST
A _______________ is developed using historical cost information that relates some software
metric to the project cost ?
A. Algorithmic cost modelling
B. Expert judgement
C. Estimation by analogy
D. Parkinson’s Law
Which of the following costs is not part of the total effort cost ?
A. Costs of networking and communications
B. Costs of providing heating and lighting office space
C. Costs of lunch time food
D. Costs of support staff
Which technique is applicable when other projects in the same analogy application domain
have been completed ?
A. Algorithmic cost modelling
B. Expert judgement
C. Estimation by analogy
D. Parkinson’s Law
Which of the following states that work expands to fill the time available ?
A. CASE tools
B. Pricing to win

03144646739 03324646739 03364646739
C. Parkinson’s Law
D. Expert judgement
Which model is used to compute the effort required to integrate reusable components or
program code that is automatically generated by design or program translation tools ?
A. An application-composition model
B. A post-architecture model
C. A reuse model
D. An early design model
Which model is used during early stages of the system design after the requirements have been
established ?
C. A reuse model
Which model assumes that systems are created from reusable components, scripting or
database programming ?
C. A reuse model
Which one is not a stage of COCOMO-II ?
A. Early design estimation model
B. Application Composition estimation model
C. Comprehensive cost estimation model
D. Post architecture estimation model
Estimation of size for a project is dependent on___________________?
A. Cost
B. Time
C. Schedule
Which one is not a size measure for software product ?
A. LOC
B. Halstead’s program length
C. Function Count
D. Cyclomatic Complexity
What all has to be identified as per risk identification ?
A. Threats
B. Vulnerabilities
C. Consequences
COCOMO-II was developed at _____________________?
A. University of Texas
B. University of Southern California
C. MIT
D. IIT-Kanpur
COCOMO was developed initially by _____________________ ?
A. B.Beizer
B. Rajiv Gupta
C. B.W.Bohem

03144646739 03324646739 03364646739
D. Gregg Rothermal
Read More Details about this Mcq
Which model was used during the early stages of software engineering, when prototyping of
user interfaces, consideration of software and system interaction, assessment of performance,
and evaluation of technology maturity were paramount ?
A. Early design stage model
B. Post-architecture-stage model
C. Application composition model
Which version of COCOMO states that once requirements have been stabilized, the basic
software architecture has been established ?
A. Early design stage model
B. Post-architecture-stage model
C. Application composition model
Which of the following uses empirically derived formulas to predict effort as a function of LOC
or FP ?
A. FP-Based Estimation
B. Process-Based Estimation
C. COCOMO
D. Both FP-Based Estimation and COCOMO
Which one is not a risk management activity ?
A. Risk assessment
B. Risk generation
C. Risk control
COCOMO stands for____________________?
A. Constructive cost model
B. Comprehensive cost model
C. Constructive cost estimation model
D. Complete cost estimation model
What is the product of the probability of incurring a loss due to the risk and the potential
magnitude of that loss ?
A. Risk exposure
B. Risk prioritization
C. Risk analysis
What threatens the viability of the software to be built ?
A. Known risks
B. Business risks
C. Project risks
D. Technical risks
Which risks are associated with the overall size of the software to be built or modified ?
A. Business impact risks
B. Process definition risks
C. Product size risks
D. Development environment risks
Which of the following is not a business risk ?
A. building an excellent product or system that no one really wants
B. losing the support of senior management due to a change in focus or change in

03144646739 03324646739 03364646739
people
C. lack of documented requirements or software scope
D. losing budgetary or personnel commitment
What threatens the quality and timeliness of the software to be produced ?
A. Known risks
B. Business risks
C. Project risks
D. Technical risks
Which of the following is a systematic attempt to specify threats to the project plan ?
A. Risk identification
B. Performance risk
C. Support risk
D. Risk projection
Which risks are associated with constraints imposed by management or the marketplace ?
A. Business impact risks
B. Process definition risks
C. Product size risks
D. Development environment risks
Which of the following term is best defined by the statement: “There will be a change of
organizational management with different priorities.”?
A. Staff turnover
B. Technology change
C. Management change
D. Product competition
Which of the following term is best defined by the statement:”the degree of uncertainty that
the product will meet its requirements and be fit for its intended use.”?
A. Performance risk
B. Cost risk
C. Support risk
D. Schedule risk
Which of the following risk is the failure of a purchased component to perform as expected ?
A. Product risk
B. Project risk
C. Business risk
D. Programming risk
Which of the following risks are derived from the software or hardware technologies that are
used to develop the system ?
A. Managerial risks
B. Technology risks
C. Estimation risks
D. Organizational risks
Which of the following strategies means that the impact of the risk will be reduced ?
A. Avoidance strategies
B. Minimization strategies
C. Contingency plans
Why is decomposition technique required ?
A. Software project estimation is a form of problem solving
B. Developing a cost and effort estimate for a software project is too complex

03144646739 03324646739 03364646739
Which software project sizing approach develop estimates of the information domain
characteristics ?
A. Function point sizing
B. Change sizing
C. Standard component sizing
D. Fuzzy logic sizing
How many forms exists of Barry Boehm’s COCOMO Model ?
A. Two
B. Three
C. Four
D. No form exists
If a Direct approach to software project sizing is taken, size can be measured
in__________________?
A. LOC
B. FP
C. LOC and FP
The expected value for the estimation variable (size), S, can be computed as a weighted average
of the optimistic(Sopt), most likely (Sm), and pessimistic (Spess) estimates given
as___________________?
A. EV = (Sopt + 4Sm + Spess)/4
B. EV = (Sopt + 4Sm + Spess)/6
C. EV = (Sopt + 2Sm + Spess)/6
D. EV = (Sopt + 2Sm + Spess)/4
If an Indirect approach is taken, then the sizing approach is represented as_______________?
A. LOC
B. FP
C. Fuzzy Logic
D. LOC and FP
Which of the following is not an effective software project management focus ?
A. people
B. product
C. popularity
D. process
A software ______________ provides the framework from which a comprehensive plan for
software development can be established?
A. people
B. product
C. process
Which of the following is not an approach to software cost estimation ?
A. Empirical
B. Heuristic
C. Analytical
D. Critical
Which of the following is not an effective project manager trait ?
A. Problem solving
B. Managerial identity

03144646739 03324646739 03364646739
C. Influence and team building
Which paradigm relies on the natural compartmentalization of a problem and organizes team
members to work on pieces of the problem with little active communication among themselves
?
A. random paradigm
B. open paradigm
C. closed paradigm
D. synchronous paradigm
Which paradigm structures a team loosely and depends on individual initiative of the team
members ?
A. random paradigm
B. open paradigm
C. closed paradigm
Which of the following paradigm attempts to structure a team in a manner that achieves some
of the controls associated with the closed paradigm but also much of the innovation that occurs
when using the random paradigm ?
A. asynchronous paradigm
B. open paradigm
C. closed paradigm
Who interacts with the software once it is released for production use ?
A. End-users
B. Client
C. Project (technical) managers
D. Senior managers
Which type of software engineering team has a defined leader who coordinates specific tasks
and secondary leaders that have responsibility for sub tasks ?
A. Controlled decentralized (CD)
B. Democratic decentralized (DD)
C. Controlled centralized (CC)
Which of the following is not a project factor that should be considered when planning the
structure of software engineering teams ?
A. The difficulty of the problem to be solved
B. High frustration caused by personal, business, or technological factors that causes
friction among team members
C. The degree of sociability required for the project
D. The rigidity of the delivery date
Which of the following is an activity that distributes estimated effort across the planned project
duration by allocating the effort to specific software engineering tasks ?
A. Software Macroscopic schedule
B. Software Project scheduling
C. Software Detailed schedule
SPMP stands for__________________?
A. Software Project Manager’s Plan
B. Software Project Management Plan

03144646739 03324646739 03364646739
C. Software Product Management Plan
D. Software Product Manager’s Plan
Which software engineering team has no permanent leader ?
A. Controlled decentralized (CD)
B. Democratic decentralized (DD)
C. Controlled Centralized (CC)
Which of the following is a people-intensive activity ?
A. Problem solving
B. Organization
C. Motivation
D. Project management
Who delivers the technical skills that are necessary to engineer a product or an application ?
A. Practitioners
B. Project managers
C. Senior managers
Which of the following is not a project manager’s activity ?
A. project control
B. project management
C. project planning
D. project design
Commitments to unrealistic time and resource estimates may result in____________________?
A. project delay
B. poor quality work
C. project failure
Which of the following is a collection of project coordination technique ?
A. Formal approaches
B. Formal, interpersonal procedures
C. Informal, interpersonal procedures
Which of the following is the reason that software is delivered late ?
A. Changing customer requirements that are not reflected in schedule changes
B. Technical difficulties that could not have been foreseen in advance
C. Human difficulties that could not have been foreseen in advance
Which of the following is not a sign that indicates that an information systems project is in
jeopardy?
A. Software people don’t understand their customers needs
B. Changes are managed poorly
C. Sponsorship is gained
D. Users are resistant
Who defines the business issues that often have significant influence on the project ?
A. Practitioners
B. Project managers
C. Senior managers
PM-CMM stands for___________________?

03144646739 03324646739 03364646739
A. people management capability maturity model
B. process management capability maturity model
C. product management capability maturity model
D. project management capability maturity model
v Programming language experience is a part of which factor of COCOMO cost drivers ?
A. Personnel Factor
B. Product Factor
C. Platform Factor
D. Project Factor
Which of the following is not one of the five information domain characteristics of Function
Point (FP) decomposition ?
A. External inputs
B. External outputs
C. External process
D. External inquiries
Who suggested the four different approaches to the sizing problem ?
A. Putnam
B. Myers
C. Boehm
D. Putnam and Myers
A make-buy decision is based on whether________________?
A. The software may be purchased off-the-shelf
B. “Full-experience” or “Partial-experience” software components should be used
C. Customer-built software should be developed
Which of the following term is best defined by the statement: “Derive traceability information
to maximize information hiding in the design.” ?
A. Underestimated development time
B. Organizational restructuring
C. Requirements changes
Which of the following risks are derived from the organizational environment where the
software is being developed ?
A. People risks
B. Technology risks
C. Estimation risks
D. Organizational risks
Which of the following term is best defined by the statement: “The underlying technology on
which the system is built is superseded by new technology.” ?
A. Technology change
B. Product competition
C. Requirements change
Risk management is one of the most important jobs for a__________________?
A. Client
B. Investor
C. Production team
D. Project manager
What assess the risk and your plans for risk mitigation and revise these when you learn more
about the risk ?

03144646739 03324646739 03364646739
A. Risk monitoring
B. Risk planning
C. Risk analysis
D. Risk identification
Which activity sits at the core of software requirements analysis ?
A. Problem decomposition
B. Partitioning
C. Problem elaboration
Which of the following term is best defined by the statement “The creation of a new codeline
from a version in an existing codeline” ?
A. Branching
B. Merging
C. Codeline
D. Mainline
Which of the following is a part of system release ?
A. electronic and paper documentation describing the system
B. packaging and associated publicity that have been designed for that release
C. an installation program that is used to help install the system on target hardware
Which of the following is a collection of component versions that make up a system ?
A. Version
B. Codeline
C. Baseline
A sequence of baselines representing different versions of a system is known as
____________________?
A. System building
B. Mainline
C. Software Configuration Item(SCI)
Which of the following is a configuration item ?
A. Design & Test specification
B. Source code
C. Log information
Which of the following is not a build system feature ?
A. Minimal recompilation
B. Documentation generation
C. Storage management
D. Reporting
Which of the following is not a Version management feature ?
A. Version and release identification
B. Build script generation
C. Project support
D. Change history recording
Which method recommends that very frequent system builds should be carried out with
automated testing to discover software problems ?
A. Agile method
B. Parallel compilation method

03144646739 03324646739 03364646739
C. Large systems method
Which of the following process is concerned with analyzing the costs and benefits of proposed
changes ?
A. Change management
B. Version management
C. System building
D. Release management
What involves preparing software for external release and keeping track of the system versions
that have been released for customer use ?
A. System building
B. Release management
C. Change management
D. Version management
Which of the following process ensures that versions of systems and components are recorded
and maintained?
A. Codeline
B. Configuration control
C. Version
D. Workspace
The definition and use of configuration management standards is essential for quality
certification in__________________?
A. ISO 9000
B. CMM
C. CMMI
Which of the following option is not tracked by configuration management tools ?
A. Tracking of change proposals
B. Storing versions of system components
C. Tracking the releases of system versions to customers
What complements the formal technical review by assessing a configuration object for
characteristics that are generally not considered during review ?
A. Software configuration audit
B. Software configuration management
C. Baseline
Which of the following is not a Software Configuration Management Activity ?
A. Configuration item identification
B. Risk management
C. Release management
D. Branch management
Which of the following is the process of assembling program components, data, and libraries,
and then compiling and linking these to create an executable system ?
A. System building
B. Release management
C. Change management
D. Version management
What combines procedures and tools to manage different versions of configuration objects that
are created during the software process ?

03144646739 03324646739 03364646739
A. Change control
B. Version control
C. SCIs
Which is a software configuration management concept that helps us to control change without
seriously impeding justifiable change ?
A. Baselines
B. Source code
C. Data model
What is the recommended distribution of effort for a project ?
A. 40-20-40
B. 50-20-30
C. 30-40-30
D. 50-30-20
Software Configuration Management can be administered in several ways. These include
__________________?
A. A single software configuration management team for the whole organization
B. A separate configuration management team for each project
C. Software Configuration Management distributed among the project members
Which of the following categories is part of the output of software process ?
A. computer programs
B. documents that describe the computer programs
C. data
Which of the following is not an adaptation criteria for software projects ?
A. Size of the project
B. Customers Complaints
C. Project staff
D. Mission criticality
A technique for performing quantitative analysis of progress is known
as______________________?
A. BCWS
B. EVA
C. BAC
D. CBSE
What is used to determine the recommended degree of rigor with which the software process
should be applied on a project ?
A. Degree of Rigor
B. Adaptation criteria
C. Task Set
D. Both degree of Rigor and adaptation criteria
Which of the following is a project scheduling method that can be applied to software
development ?
A. PERT
B. CPM
C. CMM
D. Both PERT and CPM

03144646739 03324646739 03364646739
What evaluates the risk associated with the technology to be implemented as part of project
scope ?
A. Concept scoping
B. Preliminary concept planning
C. Technology risk assessment
D. Customer reaction to the concept
Ensuring that no more than the allocated number of people are allocated at any given time in
Software Scheduling is known as ________________?
A. Time Allocation
B. Effort Validation
C. Defined Milestone
D. Effort Distribution
Every task that is scheduled should be assigned to a specific team member is termed
as_________________?
A. Compartmentalization
B. Defined milestones
C. Defined responsibilities
D. Defined outcomes
What is a collection of software engineering work tasks, milestones, and deliverables that must
be accomplished to complete a particular project ?
A. Task set
B. Degree of milestone
C. Adaptation criteria
A project usually has a timeline chart which was developed by_________________?
A. Henry Gantt
B. Barry Boehm
C. Ivar Jacabson
_________________ view shows the system hardware and how software components are
distributed across the processors in the system ?
A. physical
B. logical
C. process
Which is the limitation of high level language?
A. Lower efficiency
B. Machine dependence
C. Machine level coding
D. None of the above
FTP best matches with which OSI layer ?
A. Physical
B. Transport
C. Datalink
D. Application
Handshaking is a ?
A. Smooth running of a program.
B. Context-free Language.
C. A programming language with self correcting codes.
D. Synchronization between two communicating devices.

03144646739 03324646739 03364646739
Which one of the following is used to define the structure of the relation, deleting relations and
relating schemas?
A. DML(Data Manipulation Langauge)
B. DDL(Data Definition Langauge)
C. Query
D. Relational Schema
A type of language in which the instruction are written in binary foam is called?
A. Machine language
B. C++
C. C
D. java
A language in which a program is written on the basic of object?
A. Machine language
B. C++
C. Object-Oriented language
D. All of these

Software Engineering Mcqs.pdf

More Related Content

What's hot (20)

Similar to Software Engineering Mcqs.pdf (20)

Recently uploaded (20)

Software Engineering Mcqs.pdf