Specifications of concrete

PROPERTIES OF CONCRETE
Lecture No.02

Lecture Contents
• Specifications for Concrete
• Batching of Concrete
• Mixing of Concrete
• Transporting of Concrete
• Placing of Concrete

Specifications for Concrete
The specification, production, and delivery of
concrete are achieved in different ways. ASTM C 94
provides standard specifications for the manufacture
and delivery of freshly mixed concrete. Three
options for ordering or specifying concrete are
described in ASTM.
1. Option A is performance based. It requires the
purchaser to specify the compressive strength only,
while the concrete producer selects the mixture
proportions needed to obtain the required
compressive strength.

Specifications for Concrete
2. Option B is prescription based. The purchaser
specifies mixture proportions, including cement,
water and admixture contents.
3. Option C is a mixed option. It requires the concrete
producer to select the mix proportions with the
minimum allowable cement content and
compressive strength specified by the purchaser.

BATCHING
Batching is the process of
measuring concrete mix
ingredients by either mass or
volume and introducing them
into the mixer. To produce
concrete of uniform quality, the
ingredients must be measured
accurately for each batch.

BATCHING
Most specifications require that batching be done by
mass rather than by volume.
Water and liquid admixtures can be measured
accurately by either volume or mass. Volumetric
batching is used for concrete mixed in continuous
mixers.
Specifications generally require that materials be
measured for individual batches within the following
percentages of accuracy: cementitious material ±1%,
aggregates ± 2%, water ±1%, and admixtures ± 3%.

BATCHING
 Equipment should be capable of measuring
quantities within these tolerances for the smallest
batch regularly used as well as for larger batches.
 The accuracy of scales and batching equipment
should be checked periodically and adjusted when
necessary.
 Liquid chemical admixtures should be charged into
the mixture as aqueous solutions. Volume of liquid,
if significant, should be subtracted from the batched
quantity of mixing water.

BATCHING
 Admixtures that cannot be added in solution can be
either batched by mass or volume as directed by
manufacturer.
 Admixture dispensers should be checked frequently
since errors in dispensing the mixtures, particularly
overdoses, can lead to serious problems in both
fresh and hardened concrete.

MIXING CONCRETE
 After batching of concrete ingredients, they are
mixed in equipments specified by standard codes of
practices.
 All concrete should be mixed thoroughly until it is
uniform in appearance, with all ingredients evenly
distributed.

MIXING CONCRETE
 Mixers should not be loaded above their rated
capacities and should be operated at the mixing
speed recommended by the manufacturer.
 Increased output should be obtained by using a
larger mixer or additional mixers, rather than by
speeding up or overloading the equipment on hand.

MIXING CONCRETE
 If the blades of a mixer become worn or coated with
hardened concrete, mixing action will be less
efficient. These conditions should be corrected.
 If concrete has been adequately mixed, samples
taken from different portions of a batch will have
essentially the same density, air content, slump, and
coarse-aggregate content.
 Maximum allowable differences to evaluate mixing
uniformity within a batch of ready mixed concrete
are given in ASTM C 94 ).

Ready-mix Concrete
• Ready-mix concrete is concrete that is
manufactured in a batch plant, according to a
set engineered mix design. Ready-mix
concrete is normally delivered in two ways.
• First is the barrel truck or in–transit mixers.
This type of truck delivers concrete in a plastic
state to the site.
• Second is the volumetric concrete mixer. This
delivers the ready mix in a dry state and then
mixes the concrete on site.

Ready-mix Concrete
1.6 cubic meter transit mixer
The inside of a volumetric mixer. It uses a simple Archimedes' screw to mix
(clockwise) and to lift the concrete to the delivery chute.
A volumetric concrete mixer

Ready-mix Concrete
Small batching plant for local small deliveries

MIXING CONCRETE
Structural low-density concrete can be mixed the
same way as normal-density concrete when the
aggregates have less than 10% total absorption by
mass or when the absorption is less than 2% by
mass during the first hour after immersion in water.
For aggregates not meeting these limits, mixing
procedures are described in PCA (1986).

MIXING CONCRETE
Stationary Mixing
 Concrete is sometimes mixed at the jobsite in a
stationary mixer or a paving mixer. Stationary mixers
include both onsite mixers and central mixers in
ready mix plants.
 They are available in sizes up to 9.0 m3 (12 yd3) and
can be of the tilting or non-tilting type or the open-
top revolving blade. All types may be equipped with
loading skips and some are equipped with a
swinging discharge chute.

MIXING CONCRETE
Stationary Mixing

MIXING CONCRETE
 Many stationary mixers have timing devices, some of
which can be set for a given mixing time and locked
so that the batch cannot be discharged until the
designated mixing time has elapsed.
 Careful attention should be paid to the required
mixing time. Many specifications require a minimum
mixing time of one minute plus 15 seconds for every
cubic meter (yard), unless mixer performance tests
demonstrate that shorter periods are acceptable
and will provide a uniform concrete mixture.

MIXING CONCRETE
 Short mixing times can result in non-homogenous
mixtures, poor distribution of air voids, poor
strength gain, and early stiffening problems.
 The mixing period should be measured from the
time when all cement and aggregates are in the
mixer drum, provided all the water is added before
one-fourth of the mixing time has elapsed (ACI
304R-00).

MIXING CONCRETE
 Under usual conditions, up to about 10% of the
mixing water should be placed in the drum before
the solid materials are added.
 Water then should be added uniformly with the
solid materials, leaving about 10% to be added after
all other materials are in the drum.

MIXING CONCRETE
 When heated water is used in cold weather, this
order of charging may require some modification to
prevent possible rapid stiffening when hot water
contacts the cement.
 In this case, addition of the cementitious materials
should be delayed until most of the aggregate and
water have mixed together in the drum.
 If supplementary cementing materials are used, they
should be added after the cement.

MIXING CONCRETE
 If retarding or water-reducing admixtures are used,
they should be added in the same sequence in the
charging cycle each time. If not, significant variations
in the time of initial setting and percentage of
entrained air may result.
 Addition of the admixture should be completed not
later than one minute after addition of water to the
cement has been completed or prior to the start of
the last three-fourths of the mixing cycle, whichever
occurs first.

MIXING CONCRETE
 If two or more admixtures are used in the same
batch of concrete, they should be added separately;
this is intended to avoid any interaction that might
interfere with the efficiency of any of the admixtures
and adversely affect the concrete properties.
 In addition, the sequence in which they are added to
the mix can be important too.

MIXING CONCRETE
Ready Mixed Concrete
Ready mixed concrete is proportioned and mixed off
the project site and is delivered to the construction
area in a freshly mixed and unhardened state. It can
be manufactured by any of the following methods:
1. Central-mixed concrete is mixed completely in a
stationary mixer and is delivered either in a truck
agitator, a truck mixer operating at agitating speed,
or a non-agitating truck.

MIXING CONCRETE
Central mixing in a stationary mixer
with delivery by a truck mixer operating
at agitating speed.
Non-agitating trucks are used with
central mix batch plants where
short hauls and quick concrete
discharge allows the rapid
placement of large volumes of
concrete.

MIXING CONCRETE
Truck agitators are also used with
central-mix batch plants. Agitation
mixing capabilities allow truck agitators
to supply concrete to projects with
slow rates of concrete placement and
at distances greater than non-agitating
trucks.
Truck-mixed concrete is mixed
completely in a truck mixer.

MIXING CONCRETE
2. Shrink-mixed concrete is mixed partially in a
stationary mixer and completed in a truck mixer.
3. Truck-mixed concrete is mixed completely in a truck
mixer.

Schematic of a ready mix plant.
I…Admixtures
J…Ready mix truck with returned concrete
K…Recycled water
L…Reclaimed aggregates
M…Pump
N…Water storage
O…Concrete loaded in ready-mix truck
P…Control Room
A…Aggregate delivery
B…Aggregate receiving hopper
C…Aggregate storage
D…Conveyor belt
E…Cementitious material storage
F…Weigh hopper
G…Cement delivery
H…Mixer

MIXING CONCRETE
 ASTM C 94 (AASHTO M 157) notes that when a truck
mixer is used for complete mixing, 70 to 100
revolutions of the drum or blades at the rate of
rotation designated by the manufacturer as mixing
speed are usually required to produce the specified
uniformity of concrete.
 All revolutions after 100 should be at a rate of
rotation designated by the manufacturer as agitating
speed. Agitating speed is usually about 2 to 6 rpm,
and mixing speed is generally about 6 to 18 rpm.

MIXING CONCRETE
 Mixing at high speeds for long periods of time,
about 1 or more hours, can result in concrete
strength loss, temperature rise, excessive loss of
entrained air, and accelerated slump loss.
 When truck mixers are used, ASTM C 94 (AASHTO
M157) also limits the time between batching and
complete discharge of the concrete at the job site;
this time is 1.5 hours or before the drum has
revolved 300 times after introduction of water to
the cement and aggregates.

MIXING CONCRETE
 Mixers and agitators should always be operated
within the limits for volume and speed of rotation
designated by the equipment manufacturer.

MIXING CONCRETE
Mobile Batcher Mixed Concrete
(Continuous Mixer)
 Mobile volumetric mixers are special trucks that
batch by volume and continuously mix concrete as
the dry concrete ingredients, water, and admixtures
are continuously fed into a mixing trough.
 The concrete must conform to ASTM C 685 (AASHTO
M 241) specifications and is proportioned and mixed
at the jobsite in the quantities needed.
 The concrete mixture is also easily adjusted for
project placement and weather conditions.

MIXING CONCRETE
Mobile batcher measures materials by volume
and continuously mixes concrete as the dry
ingredients, water, and admixtures are fed into
a mixing trough at the rear of the vehicle.

MIXING CONCRETE
Remixing Concrete
 Fresh concrete that is left to agitate in the mixer
drum tends to stiffen. Such concrete may be used if
upon remixing it becomes sufficiently plastic to be
compacted in the forms.
 ASTM C 94 (AASHTO M 157) allows water to be
added to remix the concrete when the truck arrives
on the jobsite and the slump is less than specified
providing the following conditions are met:
(1) maximum allowable water-cement ratio is not
exceeded as calculated including surface water on

MIXING CONCRETE
aggregates as well as batch water and water added
on site;
(2) maximum allowable slump is not exceeded;
(3) maximum allowable mixing and agitating time (or
drum revolutions) are not exceeded; and
(4) concrete is remixed for a minimum of 30
revolutions at mixing speed or until the uniformity
of the concrete is within the limits described in
ASTM C 94 (AASHTO M 157).

MIXING CONCRETE
 If early setting becomes a persistent problem, a
retarder may be used to control early hydration,
especially in high cement-content mixes.
 Mixture adjustments at the jobsite for air
entrainment, and the addition of other admixtures,
is permitted, followed by sufficient mixing.
 Indiscriminate addition of water to make concrete
more fluid should not be allowed because this
lowers the quality of concrete. The later addition of
water and remixing to re-tamper the mixture can
result in marked strength reduction.

TRANSPORTING CONCRETE
TRANSPORTING AND HANDLING CONCRETE
 Good advanced planning can help choose the
appropriate handling method for an application.
Consider the following three occurrences that, could
seriously affect the quality of the finished work:
1. Delays in Concrete Placement
2. Early Stiffening and Drying Out
3. Segregation.

Delays. The objective in planning any work schedule
is to produce the fastest work with the best labor
force and the proper equipment for work at hand.
Machines for transporting and handling concrete are
being improved all the time.
The greatest productivity will be achieved if the work
is planned to get the most out of personnel and
equipment and if the equipment is selected to
reduce the delay time during concrete placement.

Early Stiffening and Drying Out. Concrete begins to
stiffen as soon as the cementitious materials and
water are mixed, but the degree of stiffening that
occurs in the first 30 minutes is not usually a
problem; concrete that is kept agitated generally can
be placed and compacted within 1-1/2 hours after
mixing unless hot concrete temperatures or
high cement contents speed up hydration
excessively.

• Planning should eliminate or minimize any
variables that would allow the concrete to
stiffen to the extent that full consolidation is
not achieved and finishing becomes difficult.
• Less time is available during conditions that
fasten the stiffening process, such as hot and
dry weather, use of accelerators, and use of
heated concrete.

 Segregation. Segregation is the tendency for coarse
aggregate to separate from the sand-cement mortar.
This results in part of the batch having too little
coarse aggregate and the remainder having too
much.
 The former is likely to shrink more and crack and
have poor resistance to abrasion. The latter may be
too harsh for full consolidation and finishing and is a
frequent cause of honeycombing. The method and
equipment used to transport and handle the
concrete must not result in segregation of the
concrete materials.

Methods and Equipment for Transporting and
Handling Concrete
Equipment
Type and range of
work for which
equipment is best
suited
Advantages Points to watch for
Belt conveyors
For conveying
concrete horizontally
or to a higher or
lower level. Usually
positioned between
main discharge point
and secondary
discharge point.
Belt conveyors have
adjustable reach,
traveling diverter,
and variable speed
both forward and
reverse. Can place
large volumes of
concrete quickly
when access is
limited.
End-discharge
arrangements
needed to prevent
segregation and
leave no mortar on
return belt. In
adverse weather
(hot, windy) long
reaches of belt need
cover.

Handling Concrete
Conveyor Belt

Equipment
Type and range of
work for which
equipment is best
suited
Belt conveyors
mounted on truck
mixers
For conveying
concrete to a
lower, horizontal, or
higher
level.
Conveying
equipment arrives
with the concrete.
Adjustable reach and
variable speed.
End-discharge
arrangements
needed to prevent
segregation
and leave no mortar
on return belt.
Buckets
Used with cranes,
cableways, and
helicopters for
construction of
buildings and dams.
Convey
concrete directly
from central
discharge point to
formwork or
to secondary
discharge point.
Enables full
versatility of cranes,
cable-ways, and
helicopters to be
exploited.
Clean discharge.
Wide range of
capacities.
Select bucket
capacity to conform
to size of the
concrete batch and
capacity of placing
equipment.
Discharge should be
controllable.

Handling Concrete
Bucket And Crane

Equipment
Type and range of
work for which
equipment is best
suited
Chutes on
truck mixers
For conveying
concrete to a
lower level, usually
below ground level,
on all types of
concrete
construction.
Low cost and easy
to plan. No
power required;
gravity does most
of the work.
Slopes should range
between 1 to 2 and 1 to
3 and chutes must be
adequately supported
in all positions. End-
discharge arrangements
needed to prevent
segregation.
Cranes and
buckets
The right equipment
for work
above ground level.
Can handle
concrete,
reinforcing steel,
formwork, and
various items in
bridges
and concrete-
framed buildings.
Has only one hook.
Careful scheduling
between trades and
operations is needed to
keep crane busy.

Handling Concrete
Chute Discharge From A Truck Mixer

Equipment
Type and range of
work for which
equipment is best
suited
Dropchutes
Used for placing
concrete in vertical
forms of all kinds.
Some chutes are one
piece tubes made of
flexible rubber- zed
canvas or plastic,
others are assembled
from articulated metal
cylinders (elephant
trunks).
Dropchutes direct
concrete into formwork
and carry it to bottom of
forms
Without segregation.
Their use avoids
spillage of grout and
concrete on reinforcing
steel and form sides,
which is harmful when
off-the-form surfaces
are specified. They also
will prevent segregation
of coarse particles.
Dropchutes should
have sufficiently
large, splayed-top
openings into which
concrete can be
discharged
without spillage. The
cross section
of dropchute should
be chosen to permit
inserting into the
formwork
without interfering
with reinforcing
steel.

Equipment
Type and range of
work for which
equipment is best
suited
Mobile batcher
mixers
Used for intermittent
production of
concrete at jobsite,
or where only small
quantities are
required.
A combined
materials
transporter and
mobile batching
and mixing system
for quick, precise
proportioning of
specified concrete.
One-man
operation.
Trouble-free operation
requires
good preventive
maintenance pro-
gram on equipment.
Materials must
be identical to those in
original mix
design.
Nonagitating
trucks
Used to transport
concrete on short
hauls over smooth
roadways.
Capital cost of
nonagitating
equipment
is lower than that
of truck agitators or
mixers.
Concrete slump should
be limited.
Possibility of
segregation. Height is
needed for high lift of
truck body upon
discharge.

Equipment
Type and range of
work for which
equipment is best
suited
Pneumatic guns
(shotcrete)
Used where concrete
is to be
placed in difficult
locations and
where thin sections
and large areas are
needed.
Ideal for placing
concrete in
freeform shapes,
for repairing
structures, for
protective coatings,
thin linings, and
building walls with
one-sided forms.
Quality of work
depends on skill of
those using equipment.
Only experienced
nozzle men should be
employed.
Wheelbarrows
and buggies
For short flat hauls
on all types
of onsite concrete
construction,
especially where
accessibility
to work area is
restricted.
Very versatile and
therefore ideal
inside and on
jobsites where
placing conditions
are constantly
changing.
Slow and labor
intensive.

Equipment
Type and range of
work for which
equipment is best
suited
Pumps
Used to convey
concrete
directly from
central discharge
point at jobsite to
formwork or
to secondary
discharge point.
Pipelines take up little
space and can be readily
extended. Delivers
concrete
in continuous stream.
Pump can move concrete
both vertically and
horizontally. Truck-
mounted pumps can be
delivered when necessary
to small or large projects.
Tower-crane mounted
pump provides continuous
concrete for tall building
construction.
Constant supply of
freshly-mixed concrete
is needed with average
consistency and
without any tendency
to segregate. Care must
be taken in operating
pipeline to ensure an
even flow and to clean
out at conclusion of
each operation.
Pumping vertically,
around bends, and
through flexible hose
will considerably reduce
the maximum pumping
distance.

Equipment
Type and range of
work for which
equipment is best
suited
Screw spreaders
Used for spreading
concrete over large flat
areas, such as in
pavements and bridge
decks.
With a screw
spreader a batch
of concrete
discharged from a
bucket or truck can
be quickly spread
over a wide area to
a uniform depth.
The spread
concrete has good
uniformity
of compaction
before vibration is
used for final
compaction.
Screw spreaders are
normally used as part of
a paving train.
They should be used for
spreading before
vibration is applied.

Equipment
Type and range of
work for which
equipment is best
suited
Tremies
For placing concrete
under- water.
Can be used to
funnel concrete
down through
the water into
the foundation
or other part of
the structure
being cast.
A funnel is provided at the
top end to facilitate pouring
of concrete. The bottom end
is closed with a plug or thivk
polythene sheet to prevent
entry of water into the pipe.
Diameter should be 250 to
300 mm.
Concrete mixture needs
more cement, 390 kg/m3,
and greater slump, 150 to
230 mm, because concrete
must flow and consolidate
without any vibration.

Laying of Concrete by using Tremie

Equipment
Type and range of
work for which
equipment is best
suited
Truck agitators
Used to transport
concrete for all uses in
pavements,
structures, and
buildings. Haul dis-
tances must allow
discharge of concrete
within 1-1
⁄2 hours, but limit
may be waived under
certain circumstances.
Truck agitators usually
operate from central
mixing plants where
quality
concrete is produced
under controlled
conditions. Discharge
from agitators is well
controlled. There is
uniformity
and homogeneity of
concrete on discharge.
Timing of deliveries
should suit job
organization. Concrete
crew and equipment
must be ready onsite to
handle concrete.

Equipment
Type and range of
work for which
equipment is best
suited
Truck mixers
Used to transport
concrete for
uses in pavements,
struc-
tures, and buildings.
Haul dis-
tances must allow
discharge of
concrete within 1-1
⁄2 hours, but
imit may be waived
under
certain circumstances.
No central mixing plant
needed, only
a batching plant, since
concrete is
completely mixed in
truck mixer. Discharge
is same as for truck
agitator.
Timing of deliveries
should suit job
organization. Concrete
crew and
equipment must be
ready onsite
to handle concrete.
Control of concrete
quality is not as good as
with central mixing.

Handling Concrete
Power Buggy

Handling Concrete
Tower Crane And Bucket

Handling Concrete
A Conveyor Belt Mounted On A Truck Mixer

The Screw Spreader
Handling Concrete

Handling Concrete
A Truck-mounted Pump

Handling Concrete
Flexible Hose Connected To Rigid Pipeline Leading From the Pump

Choosing the Best Method
 The first thing to look at is the type of job, its
physical size, the total amount of concrete to be
placed, and the time schedule.
 Studying the job details further will tell how much of
the work is below, at, or above ground level.
 This aids in choosing the concrete handling
equipment necessary for placing concrete at the
required levels.

 Concrete must be moved from the mixer to the
point of placement as rapidly as possible without
segregation or loss of ingredients.
 The transporting and handling equipment must have
the capacity to move sufficient concrete so that cold
joints are eliminated.

Specifications of concrete

More Related Content

What's hot (20)

Similar to Specifications of concrete (20)

More from Muhammad Hassaan Sajid (7)

Recently uploaded (20)

Specifications of concrete