suppositories - presentation slide (ppt)

Mr. R. R. Patil
Dr. Shivajirao Kadam College of Pharmacy,
Kasabe digraj, Sangli

 “Suppositories are solid dosage forms
intended for insertion in to body cavities or
orifices (Rectum, Vagina & Urethra) where
they melt or dissolved & exert localized or
systemic effect.”

 It avoid first pass effect.
Melt at body temperature.
It gives localized and systemic action.
It can be given to unconscious patient.
It is easy to use for pediatric and geriatric
patients.
Useful to produce local effect.
Useful for rapid and direct effect in rectum.
Useful to promote evacuation of bowel
Convenient for those drug causes GIT
irritation , vomiting etc.

o Irritant drug cant administered
o Embarrassment to patients
o Need to store at low temp.
o Cant easily prepared
o Cost-expensive.
o fluid content of the rectum is much less than
that of the small intestine; this may effect
dissolution rate, etc.
o Some drug may be degraded by the microbial
flora present in the rectum.

1. Rectal suppositories.
2. Vaginal suppositories.
3. Urethral suppositories.
4. Nasal suppositories.
5. Ear cones.

 Tablet Suppositories
 Layered Suppositories
 Coated Suppositories
 Capsule Suppositories

 This type of tablets prepared by compression
like tablets.
 Such type of suppositories used for rectal &
vaginal purposes.
 Pessaries tablet suppositories are present in
almond like shape.
 Rectal tablets covered with thin layers of
materials such as polyethylene glycol for
protecting.

 In that type of suppositories are contains
different drugs in different layers.
 So that, incompatibility drugs can be
separated from each other.
 Similarly drugs having different melting
points can be incorporated to control the
absorption rate.

 In that type of suppositories contains
polyethylene glycol, cetyl alcohol etc.
 Those materials controls their disintegration
rate, to impart lubricant properties & to
provide protection action during storage.

 Soft gelatin capsules of different shapes &
size are prepared in that type of
suppositories.
 In that type of capsule suppositories are filled
with liquids, semisolids or solids.
 These type of capsules are increasing in
popularity.

 Suppository bases plays important role in
maintaining their shape, solidity & also play
important role when inserted into the body
cavity.
 There are large number of bases used but
theobroma oil, glycerogelatin base &
polyethylene glycol fulfill the above mentioned
requirements.

 It must retain the shape and size.
 It should melt at body temperature.
 It should be non-irritant.
 It should shrink sufficiently to remove from
mould.
 It should not interfere in release or absorption
of drug.
 It should permit incorporation of drug.
 It should be compatible with variety of drugs.
 It should be physically stable on storage.
 It should not be soften or harden on storage.

 Oily Bases or Oleaginous bases
 Water Soluble & Water miscible bases
Or
Hydrophilic bases
 Emulsifying/Synthetic bases

 Cocoa butter or Theobroma Oil
 Emulsified cocoa butter.
 Hydrogenated oils.

 Cocoa butter is fat obtained from the roasted seed
of Theobroma cocoa.
•At room temperature it is a yellowish, white solid
having a faint, agreeable chocolate like odour.
•Chemically, it is a triglyceride (combination of
glycerin and one or different fatty acids) primarily
of oleopalmitostearin and oleodistearine.
•It melts at 30 - 350C

Advantages
◦ Melting just below the body temperature.
◦ Maintaining its solidity at usual room temperatures.
◦ Readily liquefy on heating and solidify on cooling.
Disadvantages
◦ Rancidity.
◦ Stick to mould.
◦ Leakage from body cavity.
◦ Costly.
◦ Immiscibility with body fluid.
◦ Chloral hydrate or lactic acid liquefy it.

 Emulsified theobroma oil may be used as a
base when large quantities of aqueous
solutions are to be incorporated.
 5% glyceryl monostearate, 10% lanette wax,
2-3% cetyl alcohol & 4% bees wax is
recommended for emulsified theobroma oil.

 Hydrogenated oils are used as a substitute of
theobroma oil.
 E.g. Hydrogenated edible oil, coconut oil,
hydrogenated pea oil, stearic acids, palm
kernel oil etc.

 Advantages
 Overheating does not affect the solidifying point.
 They are resistant to oxidation.
 Lubrication of the mould is not required.
 Their emulsifying & water absorbing capacity are
good.
 Disadvantages
 On rapid cooling they become brittle.
 When melted they are more fluid than theobroma
oil & result in greater sedimentaion of the added
substance.

 Glycero-gelatin base.
 Soap-glycerin base.
 Polyethylene glycol.

It is a mixture of glycerin and water which is
made stiff by the addition of gelatin.
Properties:
It is colourless, transparent, translucent in nature.
It is soft to touch.
It melts at 30 - 350C.
Used for vaginal suppositories.

 Advantages:
◦ It melt at body temperature.
◦ It mix with body fluid.
◦ Not rancid.
◦ It can be used to prepare suppositories using boric
acid, chloral hydrate bromides, iodides, iodoform
opium etc.
 Disadvantages:
◦ Difficult to prepare and handle.
◦ Chance of bacterial growth.
◦ Hygroscopic in nature. (become hard on drying and
soft in cont with moisture)
◦ Laxative in action.
◦ Incompatible with tannic acid, ferric chloride etc.

 These are commonly known as carbowaxes
& Polyglycols.
 These are available in solid, liquid or semi-
solid state depending on molecular weight.
 Those polymers having the molecular
weight betw. 200 to 1000 are liquids &
those having M.W higher than 1000 are wax
like solids.
 They are chemically stable & physiologically
inert substances & do not allow the
bacterial or mold growth to take place.

 They are chemically stable.
 Inert, Non-irritant.
 Do not allow bacterial growth.
 Physical properties changes according to
molecular weight.
 Provide prolonged action.
 Do not stick to mould.
 Suppositories are clean and smooth in
appearance.

 Witepsol
 Massa estarinum
 Massuppol.

 They solidify rapidly.
 They are non-irritant.
 The lubrication of mould is not required.
 Overheating does not affect the physical
properties of the base.
 They can absorb fairly large amount of
water or aqueous liquids.
 The white, odourless, clean and attractive
suppositories are produced.
 They are less liable to get rancid.

 They should not be cooled rapidly in a
refrigerator because they become brittle.
 They are not very viscous on melting, so the
medicaments incorporated with the base
settle down rapidly.

 They consist of triglycerides of saturated
vegetable fatty acid with varying percentage
of partial esters.
 A small amount of beeswax is added for use
in hot climate.
 It should not be cooled rapidly as it become
brittle and fracture.
 Lubrication is required.

 It is a mixture of mono, di and triglycerides of
saturated fatty acids.
 It is a white, brittle, almost odourless and
tasteless solid.
 It has a m.p. 33.5 to 35.50C.
 They are available in various grades but grade
B is commonly used in dispensing.

 Hand rolling.
 Fusion method.
 Cold compression.

 It is the oldest and simplest method of
suppository preparation and may be used
when only a few suppositories are to be
prepared in a cocoa butter base.
 It has the advantage of avoiding the
necessity of heating the cocoa butter.
 A plastic-like mass is prepared by
triturating grated cocoa butter and active
ingredients in a mortar.

 The mass is formed into a ball in the palm
of the hands, then rolled into a uniform
cylinder with a large spatula or small flat
board on a pill tile.
 The cylinder is then cut into the appropriate
number of pieces which are rolled on one
end to produce a conical shape.
 Effective hand rolling requires considerable
practice and skill.

1. Melting the suppository base
2. Dispersing or dissolving the drug in the
melted base.
3. The mixture is removed from the heat and
poured into a suppository mold.
4. Allowing the melt to congeal
5. Removing the formed suppositories from
the mold.
 The fusion method can be used with all
types of suppositories and must be used
with most of them.

 Small scale molds are capable of producing
6 or 12 suppositories in a single operation.
 Industrial molds produce hundreds of
suppositories from a single molding.

suppositories - presentation slide (ppt)

 Compression molding is a method of
preparing suppositories from a mixed mass
of grated suppository base and
medicaments which is forced into a special
compression mold using suppository
making machines.
 The suppository base and the other
ingredients are combined by thorough
mixing.

 The friction of the process causing the base
to soften into a past-like consistency.
 On a small scale, a mortar and pestle may
be used (preheated mortar facilitate
softening of the base).
 On large scale, mechanically operated
kneading mixers and a warmed mixing
vessel may be applied.
 In the compression machine, the
suppository mass is placed into a cylinder
which is then closed.
 Pressure is applied from one end to release
the mass from the other end into the
suppository mold or die.

 When the die is filled with the mass, a
movable end plate at the back of the die is
removed and when additional pressure is
applied to the mass in the cylinder, the
formed suppositories are ejected.
 The end plate is returned, and the process is
repeated until all of the suppository mass has
been used.

 Defn :- “The quantity of the drug which
displaces one part of the base is known as
displacement value.”

e.g. Determination the displacement value of a medicament in
theobroma oil suppositories containing 40% medicament,
prepared in 1 gm mould. The weight of 10 suppositories is 14.66
gm.
Solution:
1. Wt.of 10 suppo. Cont. theobroma oil alone prepared in 1 gm
capacity mould=1 x 10=10 gm
2. Wt.of 10 suppo. Cont. 40% of medicament = 14.66gm
3. Amt. of theobroma oil present = 60/100 x 14.66=8.79 gm
4. Amt. of medicament present = 40/100 x 14.66= 5.86 gm
5. Amt. of theobroma oil displaced by 5.86 gm of medicament =
10 – 8.79 = 1.20 gm
So,
Displacement value of medicament = 5.86/1.20 = 5 (Approx.)

 Suppositories are usually packed in tin or
aluminum, paper or plastic.
 Poorly packed suppositories may give rise to
staining, breakage or deformation by
melting.
 Both cocoa butter and glycerinated gelatin
suppositories stored preferably in a
refrigerator.
 Polyethylene glycol suppositories stored at
usual room temperature without the
requirement of refrigeration.

1. Uniformity of weight test:
2. Melting Range test:
 Macro-melting range: measures the time it takes
for the entire suppository to melt when immersed
in a constant temperature (370C) water bath.
 Micro-melting range: is the melting range
measured in capillary tubes for the fat base only.
 The apparatus used for measuring the melting
range of the entire suppository is a USP tablet
disintegration apparatus.
 The suppository is completely immersed in the
constant temperature water bath, and the time for
the entire suppository to melt or dispense in the
surrounding water is measured.

 This test is performed on rectal suppositories to
determine the softening time of the
suppositories.
 During this test a glass rod is placed on the
suppository held in U-tube of the apparatus
immersed in const.temp. water bath.
 The time taken for the rod to pass through the
suppository is recorded.

 Same apparatus available for these tests on
tablet.

suppositories - presentation slide (ppt)

More Related Content

Similar to suppositories - presentation slide (ppt) (20)

Recently uploaded (20)

suppositories - presentation slide (ppt)