Sync2IP 2 Port and 4 Port Sync to LAN Adapter
0 likes91 views
The Sync2IP is a 2-port adapter that converts synchronous and asynchronous serial communications into UDP/IP packets for transport over a 10/100 Ethernet network. It supports data rates from 1200 bps to 64 kbps for dual-port and 128 kbps for single-port operation, allowing for easy integration of legacy devices into Ethernet. The device is housed in a 1U rackmount chassis and allows configuration via a web browser, with firmware upgrades possible through the LAN port.
Sync2IP 2 Port and 4 Port Sync to LAN Adapter
- 1. EAST COAST DATACOM, INC. Sync2IPSync2IP 2-PORT SYNC TO LAN ADAPTER FEATURES / BENEFITS √ Data Format - transports Sync/Async serial communications over a 10/100 Ethernet network √ Data Rates - 1200 bps to 64 Kbps for simultaneous two-port operation, and up to 128 Kbps for single-port operation √ Serial Data Interface(s) - Up to Two RS-232, RS-422/449, RS-530, V.35, X.21 or TTL √ Control Signals passed in DCE-DTE: RTS, CTS, DCD, DSR and DTR √ LAN Connection - 10/100Base-T Standard RJ-45 √ Configure via Ethernet with a Web Browser or Front Panel √ Firmware Upgrades via 10/100 LAN Port √ Easily interface legacy serial devices to Ethernet √ AC or DC Power Supply Option √ 1U Rackmount Enclosure DESCRIPTION The Sync2IP is an interface conversion product that transports serial communications over an Ethernet LAN. It converts a full duplex synchronous or asynchronous serial data stream to a UDP/IP packet stream. The serial stream consists of transmit and receive data with selected control signals. Serial Data rates of 1200 bps to 64 Kbps for simultaneous two-port operation, and up to 128 Kbps for single-port operation are available to the user. Two or more Sync2IP units are required to transparently connect serial devices over the LAN. Data conversion is independent of the serial port protocol. In the synchronous mode the Sync2IP sends and receives the data bit-for-bit at the synchronous port operating clock rate. Therefore, the interconnected Sync ports must operate at the same nominal clock rate. Guaranteed delivery of Sync data requires error recovery in the customers euipment. In the asynchronous mode the data is sent on byte boundaries, and when Async flow- control is honored the interconnected Async ports may operate at different speeds. The Async byte format supported is 8 data bits, 1 stop bit, and no parity. Therefore the Async byte frame is 10 bits in length. In Async mode there is guaranteed delivery. Packets will be retransmitted for up to 15 seconds, after which time the “session” will be reset. The Sync2IP is configured via the HTML Browser interface or front panel LCD display and input buttons. The Sync2IP system firmware upgrades are accomplished via the 10/100 LAN port. Any combination of DCE and DTE devices may be supported over the peer-to-peer connection between one Sync2IP and the other. However, in Sync mode the Sync2IP does not support a connection of two DCE customer devices. In the DCE-DCE configuration RTS/CTS flow control is passed through the LAN and exposed as DCD at the peer Sync2IP unit. In the DCE-DTE configuration RTS, CTS, DCD, DSR, and DTR are passed through the LAN and presented (in time-sequence with the data) as the same (unprocessed) signals to the device connected to the peer Sync2IP. In the DTE-DTE configuration DCD control is passed through the LAN and exposed as RTS at the peer Sync2IP unit. (Async only) Xon/Xoff flow control is not processed by either Sync2IP peer. Xon/Xoff are considered data by the Sync2IP and left to the connected user devices to contend with. The Sync2IP is housed in a sturdy 1U high chassis and has a 90-240VAC power supply or optional -36 to -72VDC power supply. Additionally, an optional 2-up 1U high chassis contains two Sync2IP printed circuit cards for high density applications. The Sync2IP has a 3-year warranty and a 24 hour turnaround on warranty repairs.
- 2. EAST COAST DATACOM, INC. 245 Gus Hipp Boulevard, STE 3 • Rockledge, FL 32955-4812 U.S.A. TEL: (321) 637-9922 WEB SITE: www.ecdata.com FAX: (321) 637-9980 EAST COAST DATACOM DESIGNS AND MANUFACTURES DATA COMMUNICATION EQUIPMENT FOR YOUR NETWORK REQUIREMENTS. S P E C I F I C A T I O N S Environmental Lead Free: RoHS Compliant Operating Temp: 32º to 122º F (0º to 50º C) Relative Humidity: 5 to 95%Non-Condensing Altitude: 0 to 10,000 feet MTBF – Telcordia Issue 1 AC Powered: 371,246 hours DC Powered: 330,734 hours Dimensions Height ....... 1.75 inches (4.44 cm) Width ........ 17.00 inches (43.18 cm) Length ....... 9.00inches (22.86 cm) Weight 4 pounds (1.82 Kg) Warranty Three Years, Return To Factory ORDERING INFORMATION PPT# 180000 Model: Sync2IP_2 Desc: 2-Port Chassis, Sync / Async to 1-Port LAN Adapter PT# 180050 Model: Sync2IP_4 Desc: 4-Port Chassis, Sync / Async to 2-Port LAN Adapter Power Supply Options(1 per chassis) Part # Model 180030 AC 110/220VAC 180036 DC -36 to -72VDC Input Serial Interface Options(Up to 4-per chassis) Part # Model 129014 RS-232 DCE I/F Module 129032 RS-232 DTE I/F Module 129010 V.35 DCE I/F Module 129028 V.35 DTE I/F Module 129011 RS-530 DCE I/F Module 129029 RS-530 DTE I/F Module 129012 RS-422 DCE I/F Module 129030 RS-422 DTE I/F Module Application Serial to TCP/IP protocol adapter, to send a full duplex serial data stream over a UDP/IP stream Capacity Up to two Serial Sync or Async Ports converted to one 10/100 Base-T LAN Port Interface Serial: Async or Sync LAN: 10/100 Base-T, RJ-45 Data Rates Serial Data:1200 bps to 64 Kbps for simultaneous two-port operation, and up to 128 Kbps for single-port operation LAN: 10/100Mbps Data Format Data transparent at all data rates Serial Buffer 2048 bytes Configuration Browser Interface or Front Panel LCD and push buttons User Configuration Stored in Flash memory Firmware Upgrades Upgraded via 10/100 LAN Port Indicators System: Green or Yellow Peer: Green or Yellow Port 1: Green or Yellow Port 2: Green or Yellow Link: Green Activity:Yellow Power Source AC Power Option: 90-120 to 200-240VAC, 50/60Hz, external 110/220 volt select switch, IEC Power Inlet DC Power Option: DC Voltage, Input Range of -36 to -72vdc SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE