Technical Installation
0 likes142 views
The document outlines a successful technical installation project completed by CEA for a drinks manufacturer in Chachoengsao, Thailand, lasting three days and involving the transport and installation of large equipment including evaporators and distillation chambers. The project required precise logistics, including the use of mobile cranes for safely lifting heavy parts into the facility. All work was carried out efficiently, on time, and within budget.
Technical Installation
- 1. TECHNICAL INSTALLATION TECHNICALINSTALLATION Location Chachoengsao, Th. Duration 3 Days Dimensions (m) EvaporatorL23.6xW2.6xH2.8 DistillationL16xW1.4xH2.4 SeparatorL9.5xW2.6xH2.9 Pillar Fan L4.3xW3xH3.2 Weight Evaporator 28 T Distillation 4 T Separator 6.5 T Pillar Fan 8.5 T Total Tonnage 47 T SCOPE CEA Project Logistics completed a potentially difficult and technical installation for a well-known drinks manufacturer in Chachoengsao, Thailand. CEA provided Transportation, Lifting and the Installation of several parts of distillation columns, evaporators, separators and fans. All parts were discharged through the night at Laem Chabang Port and loaded on to several trailers. Due to its size and weight the Evaporator Chamber was loaded on to a multi-axle hydraulic trailer. The parts were transported and unloaded at the factory’s lay down area. After a site inspection two mobile cranes were moved into their positions. The Evaporator Chamber was lifted by both cranes until the chamber was vertical then the smaller crane was unhooked while the larger 500 T crane continued the lift into the facility. CEA teams ensured the safe lowering of the evaporator through the facility. CASE STUDY CS016 Technical Installation 1/2 EVAPORATOR CHAMBER TRANSPORTATION DISTILLATION CHAMBER TRANSPORTATION
- 2. TECHNICALINSTALLATION CEA PROJECT LOGISTICS 41/13 M1 AO-UDOM ROAD TUNGSUNGKHLA SRI RACHA CHONBURI 20230 THAILAND +66 38 354 019 www.ceaprojects.com The 16 metre distillation chamber was installed using the same lift technique as the Evaporator, CEA teams once again were located on several floors ensuring a safe installation and aligning it to the previously installed Evaporator. Smaller parts were unloaded and assembled at the installation site and lifted into the facility. All aspects of the project were completed in a timely and efficient manner and within budget. CASE STUDY CS016 Technical Installation 2/2 SEPARATOR LOWERED INTO POSITION CHAMBER LOWERED THROUGH EACH FLOOR SEPARATOR BEING READIED FOR LIFT ALIGNING THE CHAMBER TO ITS BASE THE W100 28 TONNE EVAPORATOR CHAMBER IS CAREFULLY LOWERED INTO THE FACILITY CEA ON-SITE TOOLBOX TALK TWO CRANES LIFT THE EVAPORATOR SMALLER PARTS LOWERED INTO POSITION BOTH MAIN CHAMBERS ALIGNED INSIDE