Template Instructions1
- 1. Energetic Neutrality Template Instructions Table of Contents 1. Introduction ............................................................................................2 2. The Method.................................................................................................2 3. The basic spreadsheet................................................................................3 3.1 How to get started ..................................................................................4 3.2 Collecting data .........................................................................................4 3.3 Enter Data ................................................................................................6 3.4 Results ....................................................................................................10 Glossary.........................................................................................................12 Useful web-sites:...........................................................................................14 With the support of: 1
- 2. 1. Introduction This explanatory paper provides the main principles for a common approach between the RURENER network members but also for other interested Communities in order to facili- tate the compilation of a unique grid of information and data regarding energy production, conversion and use at a community level. The scope of this grid is to give a quantitative tool in order to be able to measure systematically the energy issues of Communities and to improve them based on the principle “you can't manage what you can't measure”. A basic technique of energy planning is to state of a given energy system in a certain time and energy balance is such a tool. Energy balance gives a simple and clear view of differ- ent energy carriers and different stages of conversion between the energy level and can be used for comparison reasons from year to year, but not goes into details. The proposed measure grid will be simple and easy to be used and the energy balance can be done in one page providing the main elements of the all system in the area. The aim of this tool is to be applicable not only by to members of RURENER project but also by other communities willing to measure their performances and take future actions in the matters of energy and environmental protection. The tool hopes to be the framework in which someone can add or expand it according to individual Community needs. The next chapters summarize the philosophy of this measure grid, its use but also give some useful information how to use it and where you can collect valuable data. 2. The Method The fist step in planning is to understand where and how energy is currently produced and being used. The inventory is the most time-consuming part, but the most difficult aspect is to collect complete and accurate information. It must be understand what types and how the Community uses energy before we begin to find ways for energy saving and efficiency, energy production from renewable and make the Community more Energetic Neutral. The aim of this tool is to assess the staring point of a Community and the measure of progress. The initial step is to collect data and measure energy needs and supply at a Com- munity level, making clear the type of use and production of energy (transport, buildings, ...). The aim is also to allow a comparison year by year and a monitoring of the success on a longer run. The Energetic Neutrality Template is an Excel spreadsheet and it is mainly the overview of the energy production, import and consumption in the area and the use of energy (electrici- With the support of: 2
- 3. ty, heat or transport fuel) per sector (Energy Balance). We have to bear in mind that a sim- ple tool in the hand of a skilful tool user can be more powerful than the opposite. The basic criteria and requirements for the Energetic Neutrality Template are given below: • Simple structure, concise, web based in a simple form (eg excel worksheet) • Flexible (easy to update or add new subcategories by the user) • Applicable in several communities despite their diversity and characteristics • Easy access and understand the structure by the user, easy load of the data • The spreadsheet must be based on a minimal number of data in order to be as prac- ticable as possible. • Combination of bottom-up and top-down approach. • Inputs can by detailed if exists or approximately based on estimations This method has been designed to gain and present information of the main activities of a Community in order to outline useful but initial figures for future planning and concern too. 3. The basic spreadsheet The Energetic Neutrality Template presents the energy use in the following sectors: • Residential • Commercial • Public Services • Industry • Transport • Agriculture • Forestry • Fishing • Other Uses. The most of the sectors are included as most of them can by present and be affected dir- ectly in a Community level. In cases that additional and more data can be gathered the spreadsheet can be more detailed especially in terms of energy within the sectors. The spreadsheet contains basic but useful information about the Community uses of energy for a certain year. Every year the sheet can be updated showing even the changes on Com- munity energy mix or improvements. These information although it seems easy to be found in practice in many cases doesn’t exist and when you start a track record can be kept. Fur- thermore year to year this spreadsheet can be further developed giving more detailed fig- ures and analysis. With the support of: 3
- 4. 3.1 How to get started In order to create the Energetic Neutrality Template for a specific Community you need to: • Define the responsible person to gather data and create the Community energy Pro- file. • Define the year of the study. • Define the physical boundaries of the Communities (even if something like that is not so clear) and the type of analysis you want. • Mapping local and imported energy resources and energy end uses (a basic flowchart is useful). • Collect data from electricity and fuel suppliers. • Collect data form energy users. • Collect data about conversion factors and energy content. • Use the data to create the Balance sheet, some graphs and even a simple report. The physical boundaries define the study area (eg. the Community itself, a part of it, the Municipality). One factor that helps to define it is if the target deals with all aspects of en- ergy production and use or only a specific issue or area. Once the boundaries are defined the data collection can start. 3.2 Collecting data The input of the energy Balance method consists of data like: • Number of inhabitants • Supply of fuels (local and imported) • Sectors within the community and energy end uses. Depending on the detail level of input data the outputs can be referred to more detailed cat- egories. Data availability and the use of the results are crucial factors in order to elaborate a more sophisticated and detailed spreadsheet (future use). Data maybe obtained form the: • National statistics • The utilities and the owner or the manager of the electricity grid • National, Regional or Local Energy Centers • Independent energy producers • Fuel companies • Municipality Departments • Enquiries from inhabitants, companies, farms • National statistics (for comparison) With the support of: 4
- 5. Main steps: • List all or at least the most known fuels and sources of fuels that the Community uses for its needs. Fuel type examples Electricity Coal Pet coke Heavy oil Light Oil Diesel Oil Petrol Jet Fuel LPG Kerosane Natural gas Wind Hydropower Wave power Biomass Biogas from WWTP Straw Landfill gas Waste Combustion Solar energy Solar heating Energy crops Wood Geothermal energy PVs • Identify the fuel suppliers (eg. agencies, individuals). Start with the Power plant and gather data arising from the utilities concerning electricity consumption in an appropriate level. Make assumptions if necessary to fit within the data at the Com- munity level. • Gather data about the local and imported fuels and be careful not to include twice or double count the same fuel or source of energy (eg. if a wind park generates electricity into the national grid and the electricity supplier gives you figures about electricity consumption in the area don’t count it again in the total energy consump- tion). With the support of: 5
- 6. • Basically the most of the Community import, the most of their fuel and energy comes from plants or resources outside their territory. Mapping local and imported energy resources and energy end uses (a basic flowchart is useful). Use specific sources like reports or fieldwork and questionnaires for a clearer picture. • Make assumptions or even basic surveys to find out or calculate the Energy Bal- ance figures (eg. if the Community uses wood for heating you have to gather data from the wood suppliers but also to estimate the wood that the citizens cut on their own. Another difficulty is to estimate the proportion of local and imported wood). Even if the estimations can’t be accurate make clear notes and explain the assump- tion and the estimation method. • For a more elaborated Energy Balance more detailed information and data are needed. In such a case you can add spreadsheets in the basic Template and create a more detailed file. • Use as many as national, regional or local statistics you can. This helps you to track the data every year and simplifies the work. 3.3 Enter Data The excel tool is divided in two main parts: • The cover sheet • The energy data sheet Cover sheet Please specify the Community name and the study year The Energy data sheet This sheet is divided in 3 main parts: • General data • Energy Consumption part • Local Energy Production General Data Please specify the Community name, the Country, the study year and the Community Pop- ulation. Energy Consumption part This part summarises the amount of electricity, fossil fuels and renewable energy con- sumed in the Community by the end uses (sectors like residential, commercial etc). The rows refer to the different fuel types that are consumed for electricity, heat/cold and transportation reason. Communities get the most of their energy from imported, non-re- newable fossils fuels. In some cases also use some renewables. With the support of: 6
- 7. • Electricity refers to the total electricity consumed by the end users, no matter the production source is. Rows 8 and 9 can be used for more than one electricity sup- pliers (more rows must be added in case of more than 2 suppliers). This category includes the electricity consumption within the Community and represents also lo- cal or other RES interconnected (it excludes auto-producers that can be figured out in the next cell). Thus, row 10 represents the Electricity consumed in sites off the grid (eg. photovoltaïc, wind power...). Be careful of the next cells for double counts. • Fossil fuels refer to the fuels like coal, oil and gas consumed by the end-users and is mainly used for heating purposes and transportation. Fossil fuels that are used for electricity generation it is preferable to include it under “electricity” rows, especial- ly if it concerns large units. • Renewable Energy refers to sources that consumed by the end users like biomass, solar thermal, geothermal etc and are used for heat/cold mainly purposes. Electrici- ty generation falls under “electricity” rows. Columns C-E categorizes the energy amount in three main categories (electricity, heat/cold or transportation use). Column F calculates the total energy amount as a Sum of Columns C-E (use the same units). Add up the subtotals of fuel consumption (electricity, heat, transportation fuel) in each line. If you don’t know exactly the fuel use just put the to- tal fuel in the appropriate cell (Column F). Then multiple the fuel amount (eg. kWh, m 3, liters etc) with the Energy Content (Calorific Value) and/or conversion Factor (Column H) to measure all the fuels in the same unit (eg. 1 kWh=3.6 MJ, 1 lt propane=25.3 MJ, 1 BTU=1,055 J, 1 lt diesel = 36.5 MJ). Use values and factors that apply to your country ac- cording to the fuel type the Community use. Common energy units are the following: Conversion Factors Energy To : TJ Gcal Mtoe GWh multiply by TJ 1 238,8 2.388 x 10 -5 0,2778 From : Gcal 4.1868 x 10 -3 1 1 x 10 -7 1.163 x 10 -3 Mtoe 4.1868 x 10 4 1 x 10 7 1 11630 GWh 3,6 860 8.6 x 10 -5 1 Source: EU Energy in Figures 2010 With the support of: 7
- 8. Average Calorific Values, Energy Content kJ (NCV) kgoe (NCV) Hard coal 1 kg 17 200 - 30 700 0.411 - 0.733 Recovered hard coal 1 kg 13 800 - 28 300 0.330 - 0.676 Patent fuels 1 kg 26 800 - 31 400 0.640 - 0.750 Hard coke 1 kg 28 500 0,681 Brown coal 1 kg 5 600 - 10 500 0.134 - 0.251 Black lignite 1 kg 10 500 - 21 000 0.251 - 0.502 Peat 1 kg 7 800 - 13 800 0.186 - 0.330 Brown coal briquettes 1 kg 20 000 0,478 Tar 1 kg 37 700 0,900 Benzol 1 kg 39 500 0,943 Oil equivalent 1 kg 41 868 1 Crude oil 1 kg 41 600 - 42 800 0.994 - 1.022 Feedstocks 1 kg 42 500 1,015 Refinery gas 1 kg 50 000 1,194 LPG 1 kg 46 000 1,099 Motor spirit 1 kg 44 000 1,051 Kerosenes, jet fuels 1 kg 43 000 1,027 Naphtha 1 kg 44 000 1,051 Gas diesel oil 1 kg 42 300 1,010 Residual fuel oil 1 kg 40 000 0,955 White spirit 1 kg 44 000 1,051 Lubricants 1 kg 42 300 1,010 Bitumen 1 kg 37 700 0,900 Petroleum cokes 1 kg 31 400 0,750 Other petro. products 1 kg 30 000 0,717 Electrical energy 1 kWh 3 600 0,086 Source: EU Energy in Figures 2010 In Column L the efficiency (electricity, heat or process) can be inserted for the calculation of the Final Energy Consumption – end Use. For example Import Electricity or Photovolta- ic has Electricity Efficiency 100%, busses 33%. Columns P – X is a break down of Column L in different end users – sectors. With the support of: 8
- 9. Usually the output from the power plants is expressed in energy units (eg. MWh). Howev- er, the inputs to the plant (coal, oil, etc.) are often reported in physical units, respectively tonnes for coal and tonnes or litres for petroleum products. It is also important that the fuel input data are also reported in energy units. The conversion from volume or mass to energy is explained above (mostly related to oil, natural gas, solid fossil fuels and renewables). Gross inland consumption describes the total energy needs of a Community. It represents the Final energy Consumption, the energy sector consumption and distribution and transformation losses (see glossary). The share of renewables in gross inland energy consumption is defined as the percentage share of renewables in gross inland energy consumption. On the Contrary Final energy consumption represents the energy consumption of all users except the energy sector itself (whether for deliveries, for transformation, and/or its own use). In the case of the Energetic Neutrality Template it includes energy consumption by Residential, Commercial, Public Services, Industry, Agriculture, Forestry, Fishing and other Uses: • Final energy consumption in households, commercial, etc. covers quantities consumed by private households, commerce, public administration, industry, agriculture, forestry and fisheries. • Final energy consumption in transport covers the consumption in all types of transportation, i.e., rail, road, air transport and inland navigation. Residential sector: this sector consists of private households. Common uses of energy associated with this sector include water heating, air conditioning, space heating, lighting, refrigeration, cooking. Commercial and Public Services: these sectors consist of service-providing facilities and non-manufacturing business establishments like hotels, restaurants, businesses, State, Re- gional and local governments, private and public organizations, social, and educational institutions, hospitals, banks. Common uses of energy associated with this sector include water heating, air conditioning, space heating, lighting, refrigeration, cooking and other equipments. This category can be divided in two main categories: Commercial (services sector) and Public sector services. Industry: The figures reported in the industry sector for the consumption of fuels by enterprises should included quantities used in branches of the industry sector like Iron and steel, Chemical, Glass, pottery, Food, drink and tobacco, Paper and printing, Textile, With the support of: 9
- 10. leather and clothing, Other not elsewhere specified. Where possible, in that category should exclude fuels used for transportation of goods (should be reported under Transport). Transport: At least four transport modes are identified: road, rail, air and national navigation. The Energy plans usually do not include energy used outside the Community, so this category can cover mainly road and rail transport. The spreadsheet usually does not include truck and air transport that brings and carry goods into the Community. The energy consumption can be based on actual consumption data in case of municipal fleet, public transport or other commercial fleets) or estimations (eg. private transport). Agriculture: The category “Agriculture” the most of the times covers agriculture, forestry and fishing. A split into these categories is preferable depending on the Community activities. Local Energy Production In this part it is included the total energy production in the territory. It is split in 2 cate- gories: Energy produced from renewables and from non-renewables fuels like fossil and nuclear fuels (only fossil fuels extracted on the territory, including peat, coke, petrol and uranium otherwise must be stated and separated). Important notes: • In Row 41 Biomass imported (-) from the territory for energy purposes must figure out. For example a CHP plant that uses biomass can gather wood far away from the territory and thus use input outside the Community. In that case the import fuel will increase the RES ratio and in fact this RES consumed in the territory. The same case is when there are uses of biomass like at households (eg. imported wood, pel- lets, woodchips). • In Row 42 Biomass exported (+) from the territory for energy purposes must figure out. Foe example wood can be collected on the Community and be used outside the boundaries of the territory. This amound can be used for the Local RES production although the energy consumption takes place outside the territory. • In this part of the template all the RES must be figure out no matter their final use. This means that if for example a Wind park of 5MW is located in the territory of the Community this must be included in this analysis although the consumption of electricity generation can be take place far away of the territory (in the case of an interconnected plant). • Cell M50 represent the total energy produced by RES in the Community. If we di- vide it with the total energy consumption in the area (cell M29) the energetic ratio can be calculated. 3.4 Results With the support of: 10
- 11. This Balance can describe: • Which fuels the Community uses to produce energy (eg. Electricity, heat) are these recourses local or imported and how much energy the Community uses in a yearly base. • How much independent the Community is in terms of Renewable Energy Sources exploitation and clean energy use. • How much energy the Community spends in sectors like agriculture, forests, resi- dential sector, transportation etc. • Basic ideas on what can be done in the future and in which sectors and direction. A number of figures can be extracted form the Energetic Neutrality Template, like: • Energy consumption per fuel (I8-I28). • Total fuel consumption (I29). • Total Local Energy Production (I55). • Total Local RES Production (I50) • Percentage of fuel consumption by fuel (K8-K28) • Percentage of Local energy production by fuel (K34-K53) • Total end-use of energy (M29) • Final Energy consumption per fuel (M8-M28). • Percentage of final fuel consumption by fuel (O8-O28) • Energy consumption per capita (I30) and final energy consumption per capita (M30). • Local energy production per capita (I56) and final local energy consumption per capita (M56). • Neutrality rate (F58). With the support of: 11
- 12. Glossary Conventional thermal power: Technology for the production of electricity by combus- tion. May or may not include also biomass use, which is also considered a renewable source of electricity Final Energy Consumption (FEC): Final energy consumption is the energy finally con- sumed in the transport, industrial, commercial, agricultural, public and household sectors. It excludes deliveries to the energy transformation sector and to the energy industries themselves. Gross Calorific Value (GCV): The gross calorific value is the total amount of heat re- leased by a unit quantity of fuel, when it is burned completely with oxygen, and when the products of combustion are returned to ambient temperature. This quantity includes the heat of condensation of any water vapour contained in the fuel and of the water vapour formed by the combustion of any hydrogen contained in the fuel. Gross Inland Consumption (GIC): Gross inland consumption is the quantity of energy consumed within the borders of a country. It is calculated using the following formula: primary production + recovered products + imports + stock changes - exports - bunkers (i.e. quantities supplied to sea-going ships) Net Calorific Value (NCV): The net calorific value is the amount of heat released by a unit quantity of fuel, when it is burned completely with oxygen, and when the products of combustion are returned to ambient temperature. This quantity does not include the heat of condensation of any water vapour contained in the fuel nor of the water vapour formed by the combustion of any hydrogen contained in the fuel. Primary energy production is the extraction of energy from a natural source. The precise definition depends on the fuel involved: Solid fuels: Hard coal, lignite Quantities of fuels extracted or produced, calculated after any operation for removal of in- ert matter. In general, production includes the quantities consumed by the producer during the production process (e.g. for heating or operation of equipment and auxiliaries) as well as any quantities supplied to other on-site producers of energy for transformation or other uses. Crude oil: Quantities of fuels extracted or produced within national boundaries, including off-shore production. Production includes only marketable production, and excludes any quantities With the support of: 12
- 13. returned to formation. Production includes all crude oil, natural gas liquids (NGL), conden- sates and oil from shale and tar sands, etc. Natural gas: Quantities of dry gas, measured after purification and extraction of natural gas liquids and sulphur. The production includes only marketable production, and excludes any quantities re-injected, vented and flared, and any extraction losses. The production includes all quant- ities used within the natural gas industry, in gas extraction, pipeline systems and pro- cessing plants. Nuclear heat: Quantities of heat produced in a reactor. Production is the actual heat produced or the heat calculated on the basis of the gross electricity generated and the thermal efficiency of the nuclear plant. Hydropower, Wind energy, Solar photovoltaic energy: Quantities of electricity generated. Production is calculated on the basis of the gross elec- tricity generated and a conversion factor of 3600 kJ/kWh. Geothermal energy: Quantities of heat extracted from geothermal fluids. Production is calculated on the basis of the difference between the enthalpy of the fluid produced in the production borehole and that of the fluid disposed of via the re-injection borehole. Biomass / Wastes: In the case of municipal solid wastes (MSW), wood, wood wastes and other solid wastes, production is the heat produced after combustion and corresponds to the heat content (NCV) of the fuel.In the case of anaerobic digestion of wet wastes, production is the heat content (NCV) of the biogases produced. The production includes all quantities of gas con- sumed in the installation for the fermentation processes, and excludes all quantities of flared gases.In the case of biofuels, the production is the heat content (NCV) of the fuel.In the case of biofuels, the production is the heat content (NCV) of the fuel. Renewable Energy Sources (RES): Renewable energy includes hydroelectricity, biomass, wind, solar, tidal and geothermal en- ergy. Tonne of oil equivalent (toe) The tonne of oil equivalent is a conventional standardised unit for measuring energy, de- fined on the basis of a tonne of oil with a net calorific value of 41868 kilojoules/kg. Source: EU Energy in Figures 2010 With the support of: 13
- 14. Useful web-sites: Energy Glossary http://epp.eurostat.ec.europa.eu/statistics_explained/index.php/Category:Energy_glossary European Commission > Energy > Publications > Statistics http://ec.europa.eu/energy/publications/statistics/statistics_en.htm European Commission > Eurostat > Statistics http://epp.eurostat.ec.europa.eu/portal/page/portal/statistics/themes European Environmental Agency’s Publications http://www.eea.europa.eu/publications#c9=all&c14=&c12=&c7=en With the support of: 14