The Ring programming language version 1.7 book - Part 25 of 196

Ring Documentation, Release 1.7
load "stdlib.ring"
hello()
func hello {
print("Hello from function n")
}
Example:
load "stdlib.ring"
first() second()
func first { print("message from the first function n") }
func second { print("message from the second function n") }
26.3 Declare parameters
To declare the function parameters, after the function name type the list of parameters as a group of identiﬁers separated
by comma.
Example:
load "stdlib.ring"
func sum(x,y) {
print(x+y)
}
26.4 Send Parameters
To send parameters to function, type the parameters inside () after the function name
Syntax:
funcname(parameters)
Example:
/* output
** 8
** 3000
*/
load "stdlib.ring"
sum(3,5) sum(1000,2000)
func sum(x,y) { print(x+y) }
26.3. Declare parameters 212

26.5 Main Function
Using the Ring programming language, the Main Function is optional, when it’s defined, it will be executed after the
end of other statements.
if no other statements comes alone, the main function will be the first entry point
Example:
# this program will print the hello world message first then execute the main function
load "stdlib.ring"
print("Hello, World! n")
func main {
print("Message from the main function n")
}
26.6 Variables Scope
The Ring programming language uses lexical scoping to determine the scope of a variable.
Variables defined inside functions (including function parameters) are local variables. Variables defined outside func-
tions (before any function) are global variables.
Inside any function we can access the variables defined inside this function beside the global variables.
Example:
# the program will print numbers from 10 to 1
load "stdlib.ring"
x = 10 # x is a global variable.
func main {
for t = 1 to 10 { # t is a local variable
mycounter() # call function
}
}
func mycounter {
print("#{x}n") # print the global variable value
x-- # decrement
}
Note: Using the main function before the for loop declare the t variable as a local variable, It’s recommended to use
the main functions instead of typing the instructions directly to set the scope of the new variables to local.
26.7 Return Value
The function can return a value using the Return command.
Syntax:
26.5. Main Function 213

Return [Expression]
Tip: the Expression after the return command is optional and we can use the return command to end the function
execution without returning any value.
Note: if the function doesn’t return explicit value, it will return NULL (empty string = “” ).
Example:
load "stdlib.ring"
if novalue() = NULL {
print("the function doesn't return a valuen")
}
func novalue { }
26.8 Recursion
The Ring programming language support Recursion and the function can call itself using different parameters.
Example:
load "stdlib.ring"
print( fact(5) ) # output = 120
func fact(x) { if x = 0 { return 1 else return x * fact(x-1) } }
26.8. Recursion 214

CHAPTER
TWENTYSEVEN
PROGRAM STRUCTURE
In this chapter we will learn about using many source code files in the same project.
27.1 Source Code File Sections
Each source code file may contains the next sections (in the same order).
Source Code File Sections
Load Files
Statements and Global Variables
Functions
Packages and Classes
The application maybe one or more of files.
27.2 Using Many Source Code Files
To include another source file in the project, just use the load command.
Syntax:
Load "filename.ring"
Note: The Load command is executed directly by the compiler in the parsing stage
Tip: if you don’t know the file name until the runtime, or you need to use functions to get the file path, just use eval().
Example:
# File : Start.ring
Load "sub.ring"
sayhello("Mahmoud")
# File : sub.ring
func sayhello cName
see "Hello " + cName + nl
215

27.3 Load Package
Using the ‘load’ command we can use many ring source files in the same project
But all of these files will share the same global scope
We have also the “Load Package” command
Using “Load Package” we can load a library (*.ring file) in new global scope
This is very useful to create libraries that avoid conflicts in global variables
Example:
File: loadpackage.ring
x = 100
? "Hello, World!"
load package "testloadpackage.ring"
? x
test()
File: testloadpackage.ring
? "Hello from testloadpackage.ring"
x = 1000
test()
func test
? x
Output:
Hello, World!
Hello from testloadpackage.ring
1000
100
1000
27.3. Load Package 216

CHAPTER
TWENTYEIGHT
LISTS
In this chapter we are going to learn how to deal with lists.
28.1 Create Lists
We can create new lists by deﬁning the list items inside square bracts.
Example:
aList = [1,2,3,4,5]
Also we can create new lists using the : operator
Example:
aList = 1:5
aList2 = "a":"z"
Example:
aList = 5:1
aList2 = "z":"a"
Also we can create lists using the list() function
Syntax:
list = list(size)
Example
aList = list(10) # aList contains 10 items
Note: the list index start from 1
28.2 Add Items
To add new items to the list, we can use the Add() function.
Syntax:
Add(List,Item)
217

Example:
aList = ["one","two"]
add(aList,"three")
see aList
Also we can do that using the + operator.
Syntax:
List + item
Example:
aList = 1:10 # create list contains numbers from 1 to 10
aList + 11 # add number 11 to the list
see aList # print the list
28.3 Get List Size
We can get the list size using the len() function
Syntax:
Len(List)
Example:
aList = 1:20 see len(aList) # print 20
28.4 Delete Item From List
To delete an item from the list, we can use the del() function
Syntax:
del(list,index)
Example:
aList = ["one","two","other","three"]
Del(aList,3) # delete item number three
see aList # print one two three
28.5 Get List Item
To get an item from the list, we uses the next syntax
List[Index]
Example:
aList = ["Cairo","Riyadh"]
see "Egypt : " + aList[1] + nl +
"KSA : " + aList[2] + nl
28.3. Get List Size 218

28.6 Set List Item
To set the value of an item inside the list, we can use the next syntax
List[Index] = Expression
Example:
aList = list(3) # create list contains three items
aList[1] = "one" aList[2] = "two" aList[3] = "three"
see aList
28.7 Search
To ﬁnd an item inside the list we can use the ﬁnd() function
Syntax:
Find(List,ItemValue) ---> Item Index
Find(List,ItemValue,nColumn) ---> Search in nColumn, returns the Item Index
Find(List,ItemValue,nColumn,cAttribute) ---> Item Index
Example:
aList = ["one","two","three","four","five"]
see find(aList,"three") # print 3
Example:
mylist = [["one",1],
["two",2],
["three",3]]
see find(mylist,"two",1) + nl # print 2
see find(mylist,2,2) + nl # print 2
Also we can use the binarysearch() function to search in sorted list.
Syntax:
BinarySearch(List,ItemValue) ---> Item Index
BinarySearch(List,ItemValue,nColumn) ---> Search in nColumn, returns the Item Index
Example:
aList = ["one","two","three","four","five"]
aList = sort(aList)
see binarysearch(aList,"three")
Output:
five
four
one
three
two
4
28.6. Set List Item 219

28.8 Sort
We can sort the list using the sort() function.
Syntax:
Sort(List) ---> Sorted List
Sort(List,nColumn) ---> Sorted List based on nColumn
Sort(List,nColumn,cAttribute) ---> Sorted List based on Object Attribute
Example:
aList = [10,12,3,5,31,15]
aList = sort(aList) see aList # print 3 5 10 12 15 31
We can sort list of strings
Example:
mylist = ["mahmoud","samir","ahmed","ibrahim","mohammed"]
see mylist # print list before sorting
mylist = sort(mylist) # sort list
see "list after sort"+nl
see mylist # print ahmed ibrahim mahmoud mohammed samir
We can sort a list based on a speciﬁc column.
Example:
aList = [ ["mahmoud",15000] ,
["ahmed", 14000 ] ,
["samir", 16000 ] ,
["mohammed", 12000 ] ,
["ibrahim",11000 ] ]
aList2 = sort(aList,1)
see aList2
Output:
ahmed
14000
ibrahim
11000
mahmoud
15000
mohammed
12000
samir
16000
28.9 Reverse
We can reverse a list using the reverse() function.
Syntax:
28.8. Sort 220

Reverse(List) ---> Reversed List
Example:
aList = [10,20,30,40,50]
aList = reverse(aList)
see aList # print 50 40 30 20 10
28.10 Insert Items
To insert an item in the list we can use the insert() function.
Syntax:
Insert(List,Index,Item)
The inserted item will be AFTER the Index
Example:
aList = ["A","B","D","E"]
insert(aList,2,"C") # Inserts AFTER Index 2, "C" into Position 3
see aList # print A B C D E
28.11 Nested Lists
The list may contain other lists
Example:
aList = [ 1 , [10,20,30] , 5 , [100,1000,5000] ]
aList2 = [
"one","two",
[3,4],
[20,30], ["three",
"four",
"five",[100,200,300]
]
]
see aList[2] # print 10 20 30
see aList[4][3] + nl # print 5000
see aList2[5][2] + nl # print four
see aList2[5][4][3] # print 300
28.12 Copy Lists
We can copy lists (including nested lists) using the Assignment operator.
Example:
28.10. Insert Items 221

The Ring programming language version 1.7 book - Part 25 of 196

More Related Content

What's hot (20)

Similar to The Ring programming language version 1.7 book - Part 25 of 196 (20)

More from Mahmoud Samir Fayed (20)

Recently uploaded (20)

The Ring programming language version 1.7 book - Part 25 of 196