Tikam ppt 8 sem
- 1. A SEMINAR REPORT PRESENTATION On APPLICATION OF SCADA SYSTEM Submitted in partial fulfilment for the award of Degree of Bachelor of Technology SUBMITTED TO: Mr. kuldeep jayswal Assistant professor SUBMITTED BY: Tikam chand vanot 13EVJEE119 =================================================================== VIVEKANANDA INSTITUTE OF TECHNOLOGY DEPARTMENT OF ELECTRICAL ENGINEERING SISYAWAS, SECTOR-36,NRI ROAD,JAGATPURA,JAIPUR,RAJASTHAN ==================================================================== 2016-2017
- 2. SCADA:- What is SCADA?? What is power system automation Intelligent electronic device Instrument transformer Transducer Meter Digital fault recorder Protective relay Smart meter Advantage Disadvantage conclusion
- 4. Scada is ” SCADA is a system operating with coded signals over communication channels so as to provide control of remote equipment (using typically one communication channel per remote station).”
- 5. Power-system automation is the act of automatically controlling the power system via instrumentation and control devices. Substation automation refers to using data from Intelligent electronic devices (IED), control and automation capabilities within the substation, and control commands from remote users to control power-system devices.
- 6. Any device incorporating one or more processors with the capability to receive or send data/control from or to an external source (e.g., electronic multifunction meters, digital relays, controllers)
- 7. Instrument transformers are used to sense power system current and voltage values. They are physically connected to power system apparatus and convert the actual power system signals, which include high voltage and current magnitudes, down to lower signal levels
- 8. Transducers convert the analog output of an instrument transformer from one magnitude to another or from one value type to another, such as from an ac current to dc voltage.
- 9. A meter is an IED that is used to create accurate measurements of power system current, voltage, and power values. Metering values such as demand and peak are saved within the meter to create historical information about the activity of the power system
- 10. A digital fault recorder (DFR), is an IED that records information about power system disturbances. It is capable of storing data in a digital format when triggered by conditions detected on the power system. Harmonics, frequency, and voltage are examples of data captured by DFRs.
- 11. A protective relay is an IED designed to sense power system disturbances and automatically perform control actions on the I&C system and the power system to protect personnel and equipment.
- 12. In an electric power system, automatic generation control (AGC) is a system for adjusting the power output of multiple generators at different power plants, in response to changes in the load.
- 15. The government of India has decided to integrate all the state power utilities. Unified load dispatch Centre has to be build. So automation has lot more advantages as it increases efficiency and increase standardization. India is moving ahead toward automation are you??