To control one lamp with one switch.
Download as DOCX, PDF5 likes39,524 views
The objective of Experiment #07 was to control one lamp with a single switch. The apparatus included a switch, bulb holder, bulb, connecting wires, and an AC power supply. The procedure involved drawing a circuit diagram, collecting materials, cutting wires to length, connecting the positive terminal to the switch and one bulb terminal, and connecting the negative terminal to the other bulb terminal to complete the circuit. When power was applied, the lamp was successfully controlled by the single switch.
1 of 1
Downloaded 30 times
More Related Content
What's hot (20)
Ad
Similar to To control one lamp with one switch. (20)
Ad
More from Salman Jailani (20)
To control one lamp with one switch.
- 1. Experiment# 07 Objective: To control one lamp with one switch. Apparatus: Switch, bulb holder, bulb, screw driver, connecting wires, wire cutter, AC supply Circuit Diagram: Procedure: 1. Drew the circuit diagram and get them approved by staff in charge. 2. Prepare the list of tools and materials required for the work and collect them. 3. Cut the connecting wires into suitable length and make the connection according to the circuit diagram. 4. Positive terminal of the battery is connected with the switch, and one wire is connected with the second point of switch and with the bulb. The negative terminal is then connected with the other point of the bulb to make complete circuit. 5. The circuit is then checked by providing the AC supply to the circuit and shown to the supervisor. Precautions: 1. Neat and tight connection must be ensured. Result: The circuit was wired up to control one lamp by one switch and verified.