Toolsandmethodsof leanmanufacturing rg

See discussions, stats, and author profiles for this publication at: https://www.researchgate.net/publication/308171328
Tools and methods of Lean Manufacturing - a literature review
Conference Paper · June 2016
CITATIONS
15
READS
28,517
3 authors:
Some of the authors of this publication are also working on these related projects:
4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2021) View project
Virtual and augmented reality applications in e-learning systems View project
Paulina Rewers
Poznan University of Technology
19 PUBLICATIONS   74 CITATIONS
SEE PROFILE
Justyna Trojanowska
SEE PROFILE
Przemysław Chabowski
SEE PROFILE
All content following this page was uploaded by Justyna Trojanowska on 16 September 2016.
The user has requested enhancement of the downloaded file.

Technological forum 2016
Department of Manufacturing Technology, Faculty of Mechanical Engineering,
Czech Technical University in Prague
Technická 4, 166 07 Praha 6
1
Bibliographic data:
Rewers P., Trojanowska J., Chabowski P., Tools and methods of Lean Manufacturing - a literature
review, proceedings of 7th International Technical Conference TECHNOLOGICAL FORUM 2016,
Czech Republic, 28-30.06.2016, pp.135-139
Tools and methods of Lean Manufacturing - a literature review
Paulina Rewers 1), Justyna Trojanowska 2), Przemysław Chabowski 3)
1) Department of Management and Production Engineering
Piotrowo 3 Str, PL-60-965 Poznan, POLAND
Abstract in English language: This article presents an overview of methods and tools of Lean
Manufacturing, which are used in enterprises to improve production processes. Article aims to
introduce the reader to both the most commonly used tools as well as those less known. A
description of each method contains an overview of the assumptions, the main objectives and
expected results. The article described tools such as VSM, 5S, SMED, Jidoka, standardization
work, Poka-Yoke, Heijunka, TPM, Hoshin Kanri, Kamishibai, Kanban and the philosophy of Kaizen.
Keywords in English language: Lean Manufacturing, improvement, tools and methods
1. Introduction
The company's situation depends in large part from the a rapid response to changing
customer requirements. Currently, the standard becomes to produce the products exactly on time, in
the desired quantity and quality and with the lowest competitive price. All these activities, of course,
must also generate a certain profit for the company.
Enterprise to achieve its objectives, and most of all to achieve a competitive advantage in the
market must pay special attention to reducing production costs. During the implementation of
subsequent operations arises value of manufactured products thus creating a value stream. It is
important that the individual a value consisting of the price of the product was acceptable by
klienów. That is why more and more importance to improvement of production processes.
Improvement is to identify and eliminate losses occurring in production.
The concept, which allows the improvement of production processes is Lean Manufacturing
(LM). It presumes the elimination of all waste occurring on the production (Japanese. Muda), which
leads to a reduction in the transit time of the material by the process (in English. Lead time). Lean
Manufacturing is derived from the production system TPS (Toyota Production System), whose
creators are Japanese engineers: Sakichi Toyoda, Ki'ichirō Toyoda and Taiichi Ohno [7]. To achieve its
goals manufacturing companies use a variety of tools and methods of Lean Manufacturing. These
include: SMED (ang. Single Minute Exchange of Die), TPM (ang. Total productin Maintenance), 5S,
Poka-Yoke, and other [11].

2
2. Types of waste
The essence of Lean Manufacturing is the elimination of all waste occurring in the enterprise.
This shortens the time between ordering and sending the finished goods to the customer and
increase productivity and reduce manufacturing costs. Taiichi Ohno in his work [11] dedicated to
Lean Manufacturing listed seven types of waste: overproduction, inventory, mistakes and quality
defects, waiting, over-processing, unnecessary transport and unnecessary movement. Currently,
seven types of waste is enriched by yet another - untapped potential employee's [18].
Overproduction is understood as the production of products in advance and in greater
quantities than required by the customer [15]. Overproduction is considered the most dangerous
type of waste, because it translates into significant costs associated eg. Storage, and is the beginning
of other waste. Inventories are keeping more materials, raw materials, work in progress and finished
products than the required minimum. Wastage is the result of overproduction. Can lead to damage
or destruction of products and generates significant transportation and storage costs. Mistakes and
quality defects is understood as work that is not completed with positive results [14]. Waiting for a
product is the time lost due to the expectations of people, material, information, or tool that does
not add value in the manufacturing process. Excessive processing steps are necessary in terms of the
value added, which however must be implemented in order to produce the product. This waste is
understood as well as taking unnecessary time for the implementation of customer demand, as well
as the use of sophisticated and costly technologies without justification. Excess transoprt
unnecessary movement of materials, semi-finished or finished products within the company. This
leads to increased production costs and increase the risk of destruction or damage to the product.
Superfluous movement is not adding any value of physical employee. It results most often from
inadequate organization of the work. The last type waste is underspending the potential employee.
In this context, it is meant ignoring or underspending ideas, competence, talent and time employee
[12].
3. Methods of Lean Manufacturing
In this review article such tools and methods of Lean Manufacturing as: VSM, 5S, SMED,
Kanban, Jidoka, Hoshin Kanri, Heijunka, Standardized Work, Poka-Yoke, Kamishibai, Kanban and
Kaizen philosophy will be presented.
VSM - Value Stream Mapping
A tool widely used in enterprises is VSM – Value Stream Mapping. VSM is a graphical way of
presenting material and information flow in the production system. Map shows all the tasks
undertaken in the process, from the purchase of raw materials and ending with the delivery of
finished products to the customer. This analysis allows the identification of all kinds of waste and
orientation for further action in order to eliminate them [2].
5S method
Another method used for the improvement of production processes is the 5S method. 5S is
the basis for the implementation of Lean Manufacturing. The method name is derived from the first
letters of the Japanese words: Seiri, Seiton, Seiso, Seiketsu, Shitsuke. They are also the names of the
five stages of organization of the work [1]:
 Seiri – sorting, selection – the elimination of the workstation of all the items that are
unnecessary to do the job. Step is carried primarily of decreased inventory, and better use
of working space. In accordance with the principle of selection, all unnecessary items
should be marked with a red label and placed in a designated area.
 Seiton – systematics – arrangement, designation and selecting a suitable place for all tools
in the workstation at the selection stage. It can help in this instance. board of shadows or

3
color coding each tool. Step is performed to reduce unnecessary traffic employee
performed when searching for tools and elimination of errors the quality of products
resulting from mistakes by properly marking items.
 Seiso - cleaning – cleaning and maintenance of the workplace and sets out the standard of
proper cleaning. Stage aims to: maintain positions in good condition, identify and
eliminate the causes of pollution and care of machines.
 Seiketsu – standardize – determine the rules for the first three stages of 5S. In this stage,
mainly defines the responsibilities of employees and creates instructions, supporting the
execution of the previous steps. Stage provides a systematic procedure and repeatability
previously entered changes.
 Shitsuke – discipline – ratcheting up at the habits of employees to comply with the
previously introduced changes and act in accordance with the standards. It is a difficult
and long stage, because it forces you to change the habits of both production workers and
management.
5S method does not require large financial investment, it allows for the creation and
maintenance of jobs in governance functions and cleanliness shapes and proper organization of the
working environment. It is also the first step in strengthening the employees a sense of ownership in
relation to the workplace.
SMED – Single Minute Exchange of Die
This method allows for shortening to a single minute changeover time is SMED. Developer
methods Shingeo Singo has identified four stages of process improvement changeover equipment
[13]:
 analysis of the current state workstation,
 separation operations changeover operations internal and external,
 transform internal operations in external,
 to improve all aspects of the changeover.
The action of bringing the greatest effect in minimizing changeover time is to transform the
operations of internal external. Internal operations, are those whose performance takes place during
the machine downtime. External, are activities that are performed before and after the stoppage.
The more steps will have to move beyond the stop associated with the changeover, the more time
can be spent on production [9].
Standardized work
Standardization work is a tool used Lean Manufacturing for the improvement of work and
improves the sustainability of production processes [1]. Standardization means uniformly operations,
or tasks by all operators. Standardized Work is the best method of operation. This allows the exercise
of all steps in the same way, in the same order and time, at a fixed cost. Standardization also
assumes continuous development of new, better standards, so as to adapt to the constantly
changing customer requirements.
TPM – Total Productive Maintenance
TPM is a tool LM used to eliminate waste associated with technological machines in the
enterprise. TPM is a way of management, integrating all employees to maintain of production
continuity [8]. The main objective of this method is to increase the efficiency and productivity of
machinery and equipment by: a marked decrease the number of failures, reducing the time retooling

4
and adjusting machines and short downtimes and idle (caused frequently absent employee, or
waiting for the tools, material, information, etc.), reducing defects in product quality, decreased time
spent on start-up of production [16].
Kanban
Kanban is a Japanese method of production control, which assumes control not based of the
production schedule, and through events occurring directly on production. The use of Kanban allows
for almost total elimination of pre-magazines (the stock is on the workstation), interoperable, and
finished products. The raw materials are delivered from suppliers with hourly precision, , and thanks
to reserves, production capacity and flexibility of the production process it is possible to produce
almost any product at any time. In contrast, production orders are closely synchronized with orders
received from customers [3].
Kaizen Philosophy
Kaizen philosophy is the concept of continuous improvement, which assumes constant
search for ideas to improve all areas of the organization. It requires the involvement of all the
company's employees, operators, up to the highest level of management. The aim of Kaizen is
permanently replacing waste activities adding value. In practice Kaizen comes to collecting and
implementing ideas of employees, which serve to improve the organization of work, or improving the
production process [5].
Jidoka
The notion of Jidoka refers to the ability to stop the production line or machine by the
operator at the time of the appearance of a malfunction or problems during manufacture. Problems
may be related to the quality of products and delays the manufacturing process due to a lack of
material, tool information. Equipment operators the ability to detect emerging anomalies and
immediately stop the operation, it allows for a more efficient production process. Tools that enable
the implementation of the rules Jidoka are: Poka-Yoke and Andon [19].
Poka-Yoke
Poka-Yoke (jap. Show - any error, Japanese. Yoke - prevention) is a method of preventing
errors coming from mistakes. The main principle in the system Poka- Yoke is that the errors are to
blame processes, not the employees. Poka- Yoke solution is characterized to prevent any errors in
the process. With Poka-Yoke is also possible to obtain reduced time required for training employees,
eliminating many qualility control operations (or its total elimination), reducing the amount of
defects and a 100% control of the process. An example of a Poka-Yoke solution is a SIM card, which
can be put on the phone only one way through the angled corner [4].
Heijunka
Heijunka, or leveling production is mainly aimed at eliminating jumps in production. Leveling
production is known as a method of sequencing products in order to balance the production,
increase productivity and flexibility by eliminating waste and minimizing differences in load
workstations [6]. Balancing production is understood as to avoid sudden jumps in the amount of
manufactured products in the schedule [20]. Production leveling consists in determination of the
sequence and the amount of flow from the process, so that current demand was realized from the
warehouse / supermarket and did not cause sudden changes in the production schedule. Production
schedule should be in a given period of time constant (time largely depends on the seasonality of
products). The aim is to ensure that the products were produced in a particular sequence in batches
of as few pieces. In other words, production leveling is a way of ensuring the availability of products
for customers through a repeatable and uniform flow of products and supplies in the warehouse.
Repeatable flow of products from production also contributes to load balancing workstations.

5
Hoshin Kanri
Hoshin Kanri is a method that allows to focus all the company's ability to improve its
performance through the development of a unified policy and annual management plans based on
the basic concept of the company's management [17]. Hoshin Kanri can have various applications in
the enterprise, starting with strategic planning methods and tools to manage complex projects, the
quality management system (new products are manufactured in the company as a response to
customer demand) up to the operating system, ensuring stable earnings growth. The actions of this
method are carried out in the following stages:
 to define the mission and vision in the context of an overall strategy;
 defining strategic objectives (3 - 5 years);
 defining annual targets;
 transferring targets at lower levels;
 implementation of the objectives;
 inspections objectives;
 annual evaluation of the realization of the objectives.
Kamishibai
Kamishibai is a set of simple audits, which are designed to control the work, use of methods
LM, as well as to teach the person controlling find possible improvements to the process or position.
A key element of this system is an array Kamishibai, which is placed directly on the production line.
For the layout prepared a layout line schedule for conducting audits and documentation for the
auditor. Application Kamishibai makes that auditor can be any person working in the company , for
example bodyguards, the production staff, the accounting, personnel and head office. This is possible
thanks to a very simple design of the sheet audit. The sheet contains the most common check list of
areas to check in the form of pictures and images along with the location of the place on the map
layout [10].
Conclusion
In the literature, there are different views and descriptions of the various tools of Lean
Manufacturing. This paper aims to bring all the tools and methods LM, starting from the general 5S,
and ending with the less well-known: Hoshin kanri, leveling production.
Each of the methods of Lean Manufacturing is designed to support the company the
elimination of waste occurring on the production and in achieving the objectives of improving
production. Table 1 is presented a summary of eight types of waste, and sample tools to help
eliminate them.
Table 1. Summary of types of waste and methods of Lean Manufacturing, which help eliminate them,
source: own
Waste Methods of Lean Manufacturing
Overproduction Kanban, Heijunka, VSM
Excessive stocks Kanban, Heijunka, VSM
Mistakes and defects in the quality of products Poka-Yoke, Jidoka, Kamishibai
Unnecessary movement 5S, Standardized work
Unnecessary transport Kanban
Waiting TPM, SMED
Excessive processing Standardized work, Kanban
Untapped potential employee Kaizen

6
The article tools and methods of Lean Manufacturing is only a small fraction of all the
available literature on methods of improving production. The Polish companies have only recently
started to use the basic tools, such as. 5S or SMED. However, over time the company will begin to
implement newer methods LM.
Anknowledgment
The presented results of the research, carried out under the theme No. 02/23/DSMK/7677,
was funded with a grant to science granted by the Ministry of Science and Higher Education.
Bibliography
[1] Antosz K., Pacana A., Stadnicka D., Zielecki W. (2015), Lean Manufacturing Doskonalenie Produkcji,
Oficyna Wydawnicza Politechniki Rzeszowskiej, Rzeszów
[2] Czerska J. (2009), Doskonalenie strumenia wartości, Centrum Doradztwa i Informacji Define sp. z o. o.,
Warszawa
[3] Durlik I. (1996), Inżynieria zarządzania. Strategia i projektowanie systemów produkcyjnych, cz. 1 i 2,
Agencja Wydawnicza Placet, Warszawa
[4] Fisher M. (1999), Process improvement by poka-yoke, Work Study, Volume 48 Issue 7 pp. 264 – 266
[5] Hamrol A. (2015), Strategie i praktyki sprawnego działania. Lean, Six Sigma i inne. Wydawnictwo PWN,
Warszawa
[6] Hüttmeir A., Treville S., Ackere A., Monnier L., Prenninger J. (2009), Trading off between heijunka and
just-in-sequence, Int. Journal Production Economics, Vol. 118, pp. 501-507
[7] Liker J. K., Meier D. P. (2011), Droga Toyoty Fieldbook. Praktyczny przewodnik wdrażania 4P Toyoty,
Wydawnictwo MT Biznes, Warszawa
[8] Michlowicz E., Smolińska K. (2014), Metoda TPM jako element poprawy ciągłości przepływu, Czasopismo
Logistyka 3/2014
[9] Moreira AC., Campos Silva Pais G. (2011), Single Minute Exchange of Die: A Case Study Implementation,
Journal of Technology Management and Innovation, pp. 29–46.
[10] Niederstadt J. (2014), Kamishibai Boards: A Lean Visual Management System That Supports Layered
Audits, CRC Press
[11] Ohno T. (2008), System Produkcyjny Toyoty. Więcej niż produkcja na dużą skalę, ProdPress.com,
Wrocław
[12] Rother M., Shook J. (1999), Learning to see: value stream mapping to create value and eliminate muda.
Brookline, Lean Enterprise Institute, Wrocław
[13] Sawik T. (1992), Optymalizacja dyskretna w elastycznych systemach produkcyjnych. Wydawnictwo
Naukowo Techniczne, Warszawa
[14] Shook J., Schroeder A. (2010), Leksykon Lean. Ilustrowany słownik pojęć z zakresu Lean Management,
Wydawnictwo Lean Enterprise Institute Polska, Wrocław
[15] Sobańska I. (2013), Lean accounting. Integralny system lean management, Wolters Kluwer Polska,
Warszawa
[16] The Productivity Press Development Team (2012), TPM dla każdego, ProdPublishing.com, Warszawa
[17] Witcher B. J., Butterworth R. (2001), Hoshin Kanri: Policy Management In Japanese-Owned UK
Subsidiaries, Journal of Management Studies, Volume 38, Issue 5
[18] Womack J.P., Jones D.T. (2001), Odchudzanie firm. Eliminacja marnotrawstwa – kluczem do sukcesu,
Centrum Informacji Menedźera CIM, Warszawa
[19] Womack, J.P., Jones, D.T. and Roos, D. (1990), The Machine that Changed the World: The Triumph of
Lean Production, New York, Rawson Macmillan
[20] Zandin, K.B. (2001), Maynard’s Industrial Engineering Handbook, 5th ed., McGraw-Hill, New York
View publication stats
View publication stats

Toolsandmethodsof leanmanufacturing rg

More Related Content

What's hot (20)

Similar to Toolsandmethodsof leanmanufacturing rg (20)

More from Nittamallik216 (20)

Recently uploaded (20)

Toolsandmethodsof leanmanufacturing rg