trigonometric-functions-of-any-angle.pdf

Copyright © Cengage Learning. All rights reserved.
4.4 Trigonometric Functions
of Any Angle

2
What You Should Learn
• Evaluate trigonometric functions of any angle
• Find reference angles
• Evaluate trigonometric functions of real
numbers

4
Introduction
Following is the definition of trigonometric functions of Any
Angle. This applies when the radius is not one (not a unit
circle).

5
Introduction
Note: when x = 0, the tangent and secant of  are
undefined.
For example, the tangent of 90 is undefined since the sine
of 90 is 1 and the cosine of 90 is 0. 1/0 is undefined.
Similarly, when y = 0, the cotangent and cosecant of  are
undefined.

6
Example 1 – Evaluating Trigonometric Functions
Let (–3, 4) be a point on the terminal side of 
(see Figure 4.34).
Find the sine, cosine, and tangent of .
Figure 4.34

7
Example 1 – Solution
Referring to Figure 4.34, you can see by using the
Pythagorean Theorem and the given point that x = –3, y =
4, and

8
So, you have
and
cont’d

9
Introduction
The signs of the trigonometric functions in the four
quadrants can be determined easily from the definitions of
the functions. For instance, because
it follows that cos  is positive
wherever x > 0, which is in
Quadrants I and IV.
We will discuss “All Students
Take Calculus” in class as a way
to help us remember this.

11
Reference Angles
The values of the trigonometric functions of angles greater
than 90 (or less than 0) can be determined from their
values at corresponding acute angles called reference
angles.

12
Reference Angles
Figure 4.37 shows the reference angles for  in Quadrants
II, III, and IV.
Figure 4.37

13
Example 4 – Finding Reference Angles
Find the reference angle .
a.  = 300 b.  = 2.3 c.  = –135
Solution:
a. Because 300 lies in Quadrant IV, the angle it makes
with the x-axis is
 = 360 – 300
= 60.
Degrees

14
b. Because 2.3 lies between /2  1.5708 and   3.1416,
it follows that it is in Quadrant II and its reference angle
is
 =  – 2.3
 0.8416.
c. First, determine that –135 is coterminal with 225,
which lies in Quadrant III. So, the reference angle is
 = 225 – 180
= 45.
cont’d
Radians
Degrees

15
Figure 4.38 shows each angle  and its reference angle .
cont’d
(a) (b) (c)
Figure 4.38

16
Trigonometric Functions of Real Numbers

17
To see how a reference angle is used to evaluate a
trigonometric function, consider the point (x, y) on the
terminal side of , as shown in Figure 4.39.
Figure 4.39

18
By definition, you know that
and
For the right triangle with acute angle  and sides of
lengths |x| and |y|, you have
and

19
So, it follows that sin  and sin  are equal, except
possibly in sign. The same is true for tan  and tan  and
for the other four trigonometric functions. In all cases, the
sign of the function value can be determined by the
quadrant in which  lies.

20
Example 5 – Trigonometric Functions of Nonacute Angles
Evaluate each trigonometric function.
a. b. tan = (–210) c.
Solution:
a. Because  = 4/3 lies in Quadrant III, the
reference angle is   = (4/3) –  = /3,
as shown in Figure 4.40.
Moreover, the cosine is negative in
Quadrant III, so
Figure 4.40

21
b. Because –210 + 360 = 150, it follows that –210 is
coterminal with the second-quadrant angle 150.
Therefore, the reference angle is  = 180 – 150 = 30,
Finally, because the tangent is
negative in Quadrant II, you have.
cont’d
Figure 4.41

22
c. Because (11/4) – 2 = 3/4, it follows that 11/4 is
coterminal with the second-quadrant angle 3/4.
Therefore, the reference angle is  =  – (3/4) = /4,
Because the cosecant is positive
in Quadrant II, you have
cont’d
Figure 4.42

trigonometric-functions-of-any-angle.pdf

More Related Content

Similar to trigonometric-functions-of-any-angle.pdf (20)

Recently uploaded (20)

trigonometric-functions-of-any-angle.pdf