Uc 9.1 licensing and license migration

UC 9.1 Licensing and License
Migration Update
Pat Gunn and Cleo Raulerson

April 4, 2013

© 2013 Cisco and/or its affiliates. All rights reserved.

Cisco Confidential

1

• Community Participation is important

• Please post all questions in the Licensing

Community
https://communities.cisco.com/community/partn
er/collaboration/licensing?view=discussions
• New
Product Licensing Community Categories
Coming soon new Migration Resources Community


Cisco Confidential

2

• CUCM 9.1(1)/9.1(1a) Updates
• Cisco Unified Communications Manager Licensing Explained
• License Migration Planning
• License Migration to 9.1


Cisco Confidential

3

UCM/ELM 9.1(1) – implemented simplified licensing of UC 9.x commercial offer
• Licensing Chapter added to Features and Services Guide
• Licensing caveats– corrected in 9.1 added to 9.1 release notes
• UCT version 2 updated and released to coincide with UCM/ELM 9.1
• Migration and Upgrade Guide added to documentation

UCM/ELM 9.1(1)a
• Extension Mobility licensed feature change in 9.1(1a)


Cisco Confidential

4

• Extension Mobility has been removed as a licensed user feature in Unified CM

9.1(1a).
• Users with Extension Mobility only configured, no longer require an Essential license.
Extension Mobility is configured when a device profile is entered for Extension Mobility in the End User Configuration.

• Mobility (Mobile Connect) is still a licensed user feature.

• Users with Enable Mobility only configured still require a Basic license.
Mobility is configured for a user when Enable Mobility is configured.

• Devices with Extension Mobility enabled still require the device license (based on

device type).
• Users with associated devices still require licensing (based device type for 1

device/user or by number of devices per user for over 2 devices/user).

Cisco Confidential

5


Cisco Confidential

6
6

1.

CUCM calculates license requirements based on current configuration (number of
users and devices provisioned):
•
•
•

Users with no devices – with licensed user features
Unassigned devices – devices not assigned to a user
Users with devices assigned

2.

ELM queries its product inventory once each 24 hours

3.

CUCM responds with current licenses requirements

4.

ELM aggregates current license requirements per product type for all managed
CUCM publishers

5.

ELM compares the total of license requirements for all CUCM publishers to the
total of CUCM installed licenses

6.

ELM allows for tiered substitution where higher level available licenses are used to
meet lower level license requirements.


Cisco Confidential

7

7.

ELM sends back status of compliance or non compliance to all managed CUCM
publishers

8.

Based on the compliance status from ELM – if non-compliance – each CUCM
instances alert and 60 day period countdown

9.

If in non-compliance for 60 days – on the 61st day CUCM will not allow provisioning
of users and devices – call control functionality will continue – until licenses are
added.


Cisco Confidential

8

Unified CM Licensing is determined by three different configuration scenarios:
Users with NO Devices
User Only

The user has no device assigned.
Licensed per user feature: Essential (Extension Mobility) 9.0 or 9.1;
or Basic (Mobility/Mobile Connect/SNR)

Unassigned Devices
The phone is not assigned to a user.
Device Only

Licensed per device type.

Users with Assigned Devices
The user has one (or more) devices assigned.
User and Device


Licensed per device (for 1 device per user); otherwise per number
of devices per user: Enhanced Plus (2 devices); or CUWL STD (3
– 10 devices).
Cisco Confidential

9

•

Unified Communications Manager 9.0(1),9.1(1) Licensing
Feature
/License
Extension
Mobility
Mobile
Connect
(SNR)

Essential
UCL

Basic
UCL

Enhanced
UCL

Enhanced Plus
UCL

CUWL
Standard

CUWL
Professional

Y

Y

Y

Y

Y

Y

N

Y

Y

Y

Y

Y

•

Unified Communications Manager 9.1(1a) Licensing
Feature
/License
Extension
Mobility
Mobile
Connect
(SNR)

Essential
UCL

Basic
UCL

Enhanced
UCL

Enhanced Plus
UCL

CUWL
Standard

CUWL
Professional

N/A

N/A

N/A

N/A

N/A

N/A

N

Y

Y

Y

Y

Y

•

•

Example User Only License Requirements
UserID

Licensed User Feature

UserA
UserB

None

UserC
UserD

Mobility
Extension Mobility and
Mobility

Extension Mobility


License Required

Note

None
Essential UCL (<9.0/9.0/9.1)
None (9.1(1a))
Basic UCL

no assigned devices

Basic UCL

no assigned devices

no assigned devices
no assigned devices

•

a user requires a license
if they are using a
licensed user feature.
Extension Mobility is
used if a user has a
device profile listed
under Extension Mobility.
Mobile Connect is used
if a user has Mobility
Enabled
a User Only requires a
license only when
configured with one of
the licensed user
features
In 9.1(1a) EM is
removed as a licensed
user feature.
Cisco Confidential

10

License Type
Essential UCL

Device Only

Basic UCL
Enhanced UCL

Cisco Unified IP Phone 3911, 3941, 3951
Cisco Unified IP Phone 6941, 6945, and 6961 models
Cisco Unified IP Phone 7900 Series (7900G, 7911G, 7912G, 7931G, 794xG,
796xG, and 7975G models)
Cisco Unified IP Phone 8900 Series (8941, 8945, and 8961 models)
Cisco Unified IP Phone 9900 Series (9951 and 9971 models) with or without
camera
Cisco Unified Wireless IP Phones Series (792xG and 7925G-EX models)
Cisco Unified IP Conference Stations (7936G and 7937G stations)
Cisco Unified Softphones (Cisco Unified Personal Communicator, Cisco UC
Integration for Lync, Cisco UC Integration for Connect, and Cisco IP
Communicator)
Jabber clients (Jabber for Mac, Jabber for Windows, Jabber for iPhone,
Jabber for Android, Jabber for iPad, and Jabber SDK)
Cisco Virtual Experience Clients (VXC) with voice and video firmware
Cisco IP Video Phone E20
Cisco TelePresence System EX Series (EX60 and EX90)
Third-party SIP devices

Example Device Only License Requirements
Device
Device6901
Device6921
DeviceEX60

•

Cisco Unified SIP Phone 3905
Cisco Unified IP Phone 6901
Analog devices
Cisco Unified IP Phone 6911 and 6921 models

License Required
Essential UCL
Basic UCL
Enhanced UCL


Note
With no Owner User Id

•

•

a device (phone or soft
client) is not associated
to a user if there is no
entry in the ―Owner
User Id‖ field on the
device configuration.
a Device Only requires
a license when added
(configured) based on
device type
once a device is
associated to a user by
setting Owner User Id –
then User and Device
licensing applies (next
slide)

Cisco Confidential

11

Example Users and Device License Requirements
Device

Owner User Id

Licensed User Feature

Device6901
Device6901

UserA
UserB

None
Extension Mobility

Device6901
Device6901

UserC
UserD

Mobility
Mobility

Basic UCL
Basic UCL

Device6921
Device6921
Device6921
Device6921

UserA
UserB
UserC
UserD

None
Extension Mobility
Mobility
Mobility

Basic UCL
Basic UCL
Basic UCL
Basic UCL

DeviceEX60

UserA

None

Enhanced UCL

DeviceEX60

UserB

Extension Mobility

Enhanced UCL

DeviceEX60

UserC

Mobility

Enhanced UCL

DeviceEX60

UserD

Mobility

Enhanced UCL

•

Essential UCL
Essential UCL


License Required

•
•

•

a user is associated to a
device when their userid
is entered in the ―Owner
User Id‖ field of the
device
when associated, the
User and Device share
a license
User and Device
associations for users
with one device are
determined by device
type
For users with multiple
devices – (next slide)
Cisco Confidential

12

Unified Communications Manager Licensing
Essential
UCL

Basic
UCL

Enhanced
UCL

Enhanced Plus
UCL

CUWL
Standard

CUWL
Professional

1

1

1

2

10

10

Max #
Devices per
User

Example User and Multiple Devices License Requirements
UserID
UserA
UserB
UserC
UserD

•

Number of Devices
1
2
3 - 10
>10


License Required
per device type
Enhanced Plus
CUWL STD
CUWL STD and
additional license

Note
See User and Device License

•

when a user is
associated to more than
one device then higher
level licenses are
required – independent
of device type.
Enhanced Plus, CUWL
Standard and CUWL
Professional support
multiple device users.

See User and Device License

Cisco Confidential

13

Unified CM license requirements can be viewed from the Cisco Unified Communications
Manager – Administrator
select System -> License Usage Report


Cisco Confidential

14

select Users from License Usage Report

select Unassigned Devices from License Usage Report


Cisco Confidential

15


Cisco Confidential

16
16

Prior to UC 9.x migration:
 Fulfill any unused license PAKs*

 Install all licenses*
 Validate licensing installed and

snapshot CUCM license usage
 Use Cisco License Count Utility

(UCT) to plan UC 9.x CUCM
license requirements
 Order and install UC 9.x

*IMPORTANT NOTE: You must apply all pre-9.x licenses to CUCM before you upgrade. After you
upgrade, you cannot install pre-9.x licenses to the Enterprise License Manager.

Cisco Confidential

17

Used for planning license migration into UC 9.x licensing for CUCM instances.

Allows a customer to view CUCM license requirements for all CUCM instances and to
plan for unused DLU allocation to UC 9.x licenses.
Cisco License Count Utility (UCT) may be downloaded from the software download site
under CUCM 8.6 Utilities:
http://www.cisco.com/cisco/pub/software/portal/select.html?&mdfid=283782839&f
lowid=26422&softwareid=282204704
Version 2 : CUCM/ELM 9.1(1)
Version 2.1a: CUCM/ELM 9.1(1a)

Supports CUCM versions 6.x through 8.x
NOTE: License counts are determined by the current CUCM configuration
(number of users and devices)

License
Count Utility
(UCT)
Cisco Confidential

18

License Requirements Based on Usage Data
• Connects to CUCM publisher instances.

*Install all licenses first*

• Determines current license usage based on current configuration (number of users and devices

provisioned).
• Carries forward unused DLUs.
• Displays summary per CUCM instance the license quantities required.

License Conversion Worksheet
• Current License Usage – uses same algorithm as CUCM 9.x to determine total license requirements

based on configured devices and users
• Recommended License Count – shows minimum licenses required to meet the Current License Usage.
For UCL recommendation mode Recommended License Count = Current License Usage.
For CUWL recommendation mode Recommended License Count for Enhanced licenses = # Public Devices and for CUWL Standard =
Current License Usage - # Public Devices

• Adjust Recommended Count – allows customers to adjust recommended license counts and allocate unused DLUs.
• DLUs per license – shows the number of DLUs used per license type when Recommended Counts are adjusted. The

number of DLUs are used to subtract from the unused DLUs when Recommended counts are adjusted to require
additional licenses – higher than the Recommended Counts.


Cisco Confidential

19

License Count Utility (UCT)
Use for migration planning
1. Connect and generate
license report
2. Review current license
usage
3. Plan unused DLU
license allocation

Cisco Confidential

20

For a migration from 4.x (RTU based) and 5.x (device only based) systems, This will need to
be processed manually.
1. Fulfill any unused license PAKs*
2. Install all licenses*
3. Validate licensing installed and snapshot CUCM license usage (5.x only)
4. Open a case with licensing
RE: Migration to 9.1 from 4.x/5.x
a. Provide SO# of upgrade
b. Provide device inventory (qty of each device type)
c. Provide planned user counts (users with no features, users with mobility enabled)
d. CUCM license usage screenshot (5.x only)


Cisco Confidential

21


Cisco Confidential

22
22

Cisco’s goal in the migration process to version 9.1(1) is to finally come to agreement with our
customer base on the number of user licenses and types to which they are entitled. This
manual process will allow customers the flexibility to move forward with
•
•
•
•

The same quantity and type of licenses,
Decrease their license quantity and type (without refund),
Increase their quantity and select additional license types by converting DLUs, or
Pay to upgrade their license types

Once customers get through the upgrade process and ―lock in‖, this will be the customer
entitlement record moving forward. There will not be any further modifications and we will put
a stake in the ground from which to move forward.


Cisco Confidential

23

• Key Points
• Changes to 9.1 Migration
• Migration Process Overview

• User Scenarios with Numerical Examples
①
②
③
④
⑤
⑥

Migrating Unused DLUs to 9.1 UCL User Licenses
Migrating Unused DLUs or Existing UCL Licenses to 9.1 CUWL User Licenses
Migrating Existing CUWL Licenses to 9.1 CUWL Licenses
Converting Existing CUWL Licenses to mixed 9.1 CUWL/UCL Licenses
Configuring Extension Mobility
User Device Association

• 5 Top FAQs
• Summary

Cisco Confidential

24

LICENSING MIGRATION
• For the migration to 9.x, Customers are granted new 9.x licenses for the users and devices they have

currently configured on their systems at no additional licensing cost.
• At the time of the next UCSS/ESW contract renewal, the UCSS/ESW contract terms and price will be

based on the user count and license type issued during license migration, plus any additional users
purchased after migration.
• Use of Extension Mobility will be issued at no cost for the migration and additional licenses issued for

Extension Mobility will not alter the existing UCSS/ESW contract
BENEFITS OF 9.X LICENSING
• Licensing requirement timing
60 Day grace period after Installation/Configuration before needing the license
ELM reports licensing requirements after migration which can be used to obtain permanent licenses
• Licensing is now controlled at the customer level rather than by cluster/server simplifying the licensing

process
Pooling across clusters/servers is defined by customer through attachment to an Enterprise License Manager (ELM)
One place to go for all licensing information
Licensing is by tiers of users, each lower tier is a sub-set of the higher tier

Cisco Confidential

25

• Communications Manager is moving to manual migration so that Cisco can properly

generate licenses for all of the different types of configurations and deployments
Submit case to GLO to obtain your 9.1 license or get your 9.1 license migration questions answered

• Connection will continue to use the automated migration tool in ELM
• Extension mobility license changes are included in 9.1(1a)


Cisco Confidential

26

Data
Collection

• Register &
apply unused
PAKs
• Run License
Count Utility
(UCT) for
6.x/higher
• Validate
licensing
installed and
compare UCT
to purchases

Planning

• Migrate existing
deployment to
9.1 release
• Install &
configure
Enterprise
License
Manager (ELM)
• Run system
under 60 day
grace period
• Copy ELM
License Request
to Text File
Full Process description in “Details for Future Reference” Section

• Read (these)
migration
guidelines for user
license migration
• Plan for
UCSS/ESW at
renewal on
additional licenses
issued
• Decide on unused
DLU allocation
(UCL only)

Install
Software

Request
License

• Submit licensing
case to GLO with
required
information
• Receive 9.1
license from GLO
• Receive
confirmation email
on 9.1 users
licensed
• Receive email on
updated contract
record update to
licensed quantities

Ongoing
Deployment

• Install license in
ELM
• Receive
UCSS/ESW
renewal quote
based on 9.1
user quantities

Cisco Confidential

27

TAC
Service Request
Tool

Open your service request by web:
www.cisco.com/tac/caseopen

Email

Open any service request via
licensing@cisco.com

Phone

Open service request by telephone via countryspecific numbers
http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html

The Global Licensing Operations (GLO) Team is available 24 x 7 x 365 and has
knowledgeable agents that can help.
- Process your request and route it to the team best able to assist you
- Expect a response within 48-72 hours
- Remember: Communications Manager & Connection licensing has a 60 day grace period from the
time that users are configured on the system

Cisco Confidential

28
28

• Title: License Migration to 9.1
• License Count Tool (UCT) analysis in Excel format showing required licenses and unused

DLUs allocated to new licenses OR ELM license usage report (all users/devices have been
fully configured) OR if 3x/4x/5x device type/quantity inventory
• Entitled UCSS/ESW Contract number(s) or proof of purchase of a version upgrade
• Site information (name-all name permutations, City, state, country) for contract update
• Email address(es) to send license and software support contract updates
• ELM Generated License Request (in .txt file as an attachment)
• MAC address/Licensing MAC from existing publisher server(s)
• If a UCL customer, how customer wants to allocate unused DLU’s


Cisco Confidential

29

• Unused DLUs may be used to add more Enhanced user seats at no

additional license charge.
• UCSS/ESW will increase to cover additional Enhanced user seats.

Customers with UCSS Today
UCSS/ESW coverage on any new user licenses
added will be provided under the customer’s
current UCSS/ESW contracts until next renewal at
which time UCSS/ESW rates will be calculated at
the new license level & quantity.


Customers without UCSS Today

UCSS/ESW needs to be acquired at
time of conversion (check available
incentives).

Cisco Confidential

30

During Migration to 9.1

Before Migration
CUCM SW Version

7.1 (3)

# Server Nodes

5

# of DLUs bought

6000

License Conversion at NO Cost

Used DLUs

800 7960 Phones
Configured

800 UCL Enhanced

Jan 2nd, 2014

+
Optional

Unused DLUs

2800 DLUs

User Licenses

N/A

Service Contract

700 CUCM users on
current Contract
(Renewal - Jan 2nd, 2014)

Customer Mapped to 466
UCL Enhanced

=

1266
UCL Enhanced
Licenses
Issued


Service Contract/Install Base changed to reflect
the 1,266 9.1 UCL Enhanced users that have
been installed but NO immediate change in Cost

UCSS/ESW contract
renewal quote will be
for 1,266 9.1 UCL
Enhanced licenses

Cisco Confidential

31

Use unused DLUs for additional CUWL Standard licenses: Unused DLUs can be used for CUWL
licenses. This conversion of unused DLUs to CUWL seats is done in two steps:
1.

Migrate DLUs to UCL Enhanced. This gives the customer the entitlement to Communications Manager.

2.

Order the appropriate CUWL migration part number to complete the process (check available incentives). This
entitles the customer to the complete feature set of the CUWL bundle with appropriate UCSS

Use existing UCL seats for additional CUWL Standard seats: This conversion of existing UCL
licenses to CUWL licenses is done in a single step and that is step 2 above.

migrated to CUWL will be obtained as part of the
CUWL Migration purchase. Current users not
migrated to CUWL will be covered by the
customer’s current UCSS/ESW contracts until next
renewal at which time UCSS/ESW rates will be
calculated at the new license level and quantity.



UCSS/ESW needs to be acquired at
time of conversion (check available
incentives).

Cisco Confidential

32

Before Migration
CUCM SW Version

5

# of DLUs bought

6000

Used DLUs

800 7960 Phones
Configured

Jan 2nd, 2014

7.1 (3)

# Server Nodes


800 UCL Enhanced

Unused DLUs

2800 DLUs

User Licenses

700 CUCM users on
current Contract

Customer Mapped to 466
UCL Enhanced

&

=

800 UCL
Enhanced
+
466 CUWL
Standard

Order 466 CUWL Standard
Migration

N/A

Service Contract

+


To complete the
move to CUWL &
receive the complete
CUWL feature set,
purchase the CUWL
migration (check
available incentives)

the 800 9.1 UCL Enhanced & 466 CUWL
Standard licenses that have been installed

UCSS/ESW contract
for 800 9.1 UCL
Enhanced and 466
CUWL Standard
licenses
Cisco Confidential

33

• Users purchased as CUWL are migrated to 9.1 as CUWL users: Number of

CUWL users purchased in previous version is issued as the same number/type of
9.1 CUWL users.
• No changes to UCSS/ESW


Cisco Confidential

34

Before Migration

CUCM SW Version

1000 CUWL Standard

Used Licenses

1000 7970 Phones
Configured with Soft
Client

Jan 2nd, 2014

7.x

# of User Licenses
bought


Unused Licenses

1000 CUWL Standard
users on current Contract

1000
CUWL Standard

=

1000
9.1 CUWL Standard
Licenses Issued

None

Service Contract



Service Contract/Install Base left as or updated
to 1000 CUWL Standard licenses that have
been installed

UCSS/ESW contract
for 1000 9.1 CUWL
Standard licenses

Cisco Confidential

35

• DLU’s issued from CUWL purchased users converted to additional UCL users: CUWL

Users are issued on the 9.1 license for the total number of CUWL Standard or Pro users
that were purchased. If there are still additional users that need licensing, the appropriate
level of UCL user licenses will be issued to cover the remaining users.
• Cisco does not encourage this scenario as CUWL is sold with the terms and conditions of

use for only one user.

added will be provided under the customer’s
current UCSS/ESW contracts until next renewal at
which time UCSS/ESW rates will be calculated at
the new license level and quantity


UCSS/ESW needs to be acquired at time
of conversion (check available
incentives).

Cisco Confidential

36

Before Migration
CUCM SW Version

5

Jan 2nd, 2014

7.1 (3)

# Server Nodes



1000 CUWL Standard
# of User Licenses
Bought

(11,000 DLU’s per 5 Server
Node + 1000/250 ports/HA
Unity Connection Licenses )

Used DLUs

1200 8.6 7970 Phones
Configured

Unused DLUs

N/A

Service Contract

1000 CUWL Standard


1000 CUWL Standard
& 200 Enhanced

=

1000
9.1 CUWL
Standard
licenses
+
200 UCL
Enhanced
licenses

the 1000 9.1 CUWL Standard & 200 UCL
Enhanced licenses that have been installed but
NO immediate change in Cost

UCSS/ESW contract
renewal quote will be for
the 1000 9.1 CUWL
Standard & 200 UCL
Enhanced licenses

Cisco Confidential

37

Users with extension mobility configured: Customers will not require an additional license for
users with extension mobility configured when migrating to 9.1(1a). The requirement for a license
for a user profile has been turned off (provided not using SNR or soft-client). Example Below:
Before Migration
CUCM SW Version

5

# of User Licenses
Bought

8000 DLUs

Used DLUs

2,000 8.6 7960 phones but
none of the phones are
associated with the user
profiles

Unused DLUs

None

Service Contract

2000 CUCM Users on the
current Contract (Renewal
- Jan 2nd, 2014)

Jan 2nd, 2014

7.1 (3)

# Server Nodes



2000 UCL Enhanced

=

2,000 9.1 UCL
Enhanced

The Extension Mobility feature does not require a
license in 9.1(1a)

Service Contract/Install Base changed to
reflect the 2000 9.1 UCL Enhanced
licenses that have been installed

UCSS/ESW contract
for 2000 9.1 UCL
Enhanced licenses

Cisco Confidential

38

Two options for User Device Association:

As part of the migration, associate users to devices. Where appropriate, the preferred solution is to associate users to
devices. Tools are being developed to simplify this association.

If you did not associate users to devices, Cisco will support this current configuration on an as-needed basis. The current
solution is to do a manual migration with permanent, incremental licenses for each device which is not associated. Cisco will
be delivering tools and streamlined processes to associate devices with users.
Multi-Device users (UCL Enhanced Plus & CUWL): If users are not associated with shared devices (e.g., for hot desking), we will provide
additional licenses (Enhanced) with no additional UCSS/ESW services charges for the additional licenses.


Cisco Confidential

39

Before Migration

CUCM SW Version

100 CUWL Standard

Used Licenses

100 9971 Hard Phones
for Hot Desking. Not
associating users to
phones and deploying
Jabber

Jan 2nd, 2014

8.x

# of User Licenses
bought


Unused Licenses

Service Contract

100 CUWL Standard

+
100 UCL Enhanced

=

100 9.1 CUWL
Standard
Licenses Issued
along with 100
Enhanced
licenses

None
100 CUWL Standard



Service Contract/Install Base left as 100 CUWL
Standard licenses that have been installed

UCSS/ESW contract
for 100 9.1 CUWL
Standard licenses

Cisco Confidential

40

•

How do I migrate multiple clusters?
Answer: From a technical perspective, migrate clusters one at a time. For Licensing, customers/partners can request licensing at the
time that they move each cluster, OR they can ask that all user licenses be migrated all at once and then the pre-9.x systems run on
their old licenses until time of migration.

•

Do ―Jabber for Everyone users‖ require a license when migrating to 9.x?
Answer: The Jabber for Everyone user does not require a license to use the IM&P capabilities delivered through the Jabber for
Everyone promotion. However, if the user would like to take advantage of the click-to-call functionality included as part of the Jabber
for Everyone promotion in either in either pre-9.x or 9.x, they would need to have an IP phone connected to Cisco's UC Manager as
well as the appropriate license for that IP Phone.

•

How are CUCM-BE licenses migrated?
Answer: all CUCM-BE licenses must be migrated manually. Please open up a case with GLO, providing all requested fields as
described on the ―Information to send to GLO‖ slide earlier in the presentation.

•

What do I do if I get an error message stating ―The license file cannot be validated because there is a problem with its security
certificate‖?
Answer: Open a case with the Global Licensing Operations (GLO) team and ask for the license to be resent with regeneration. This
will resend the license with the signature file and will resolve the issue.

•

How do I get a PAK for my 9.x version upgrade order—no PAKs were shipped with the order?
Answer: No PAKs are needed for migrations to 9.x for Communications Manager and Unity Connection. To obtain your 9.x license,
please open up a case with GLO, providing all requested fields as described on the ―Information to send to GLO‖ slide earlier in the
presentation.


Cisco Confidential

41

• After the license migration, you have all of the benefits of 9.1 licensing:
Pooling across clusters
Electronic issuance for additional user licenses purchased
Accurate reporting of licenses and usage

• License migration is manual for Communications Manager
Open a case with GLO by emailing licensing@cisco.com

• This manual process will allow customers the flexibility to move forward with
The same quantity and type of licenses,
Decrease their license quantity and type (without refund),
Increase their quantity and select additional license types by converting DLUs
• 9.1 License type/quantity will drive the next UCSS/ESW renewal quote
• Collateral links in the ―Details for Later Reference‖ section

Cisco Confidential

42


Cisco Confidential

43
43

• For the migration to 9.x, Customers are granted new 9.x licenses for the users and devices

they have currently configured on their systems. In addition, for Communications Manager
(UCL), they will have the ability at the time of migration to apply their unused DLUs to new
9.x licenses. Use of features like extension mobility will be issued at no cost for the
migration.
• If the customer’s license counts or license types change from what was previously

purchased, as determined by the ELM migration utility or the Licensing Operations team,
then the customer is granted those licenses during the migration process.
• At the time of the next UCSS/ESW contract renewal after migration to 9.x, the UCSS/ESW

contract terms and price will be based on the user count and license type issued during
license migration, plus any additional users purchased after migration. Where a customer
has multiple UCSS/ESW contracts, it will attach to the first one.
• Customers migration to new CUWL licenses that have not been previously purchased

require purchase of migration to CUWL including the associated UCSS and ESW.

Cisco Confidential

44

• CUCM-BE Example:

Purchased 100 user CUCM-BE system and later purchased 25 more UCL users
License that will be issued: 125 9.1 UCL Enhanced users and 100 Unity
Connection users on same license
• Migrating Analog, Adjunct and Public Space Licenses
Analog users are migrated to 9.1 Essential Users
Adjunct users are not migrated
Public Space licenses are migrated to 9.1 Enhanced Users


Cisco Confidential

45

DATA COLLECTION
• Register and apply any unused PAKs to the system that will be migrated. Install all licenses

into the pre-9.0 system(s). If customer has planned for growth in the previous license
model, consider this when migrating. cisco.com/go/license
• Run License Count Utility (UCT) on existing system for 6.x/higher to determine how current

configuration will map to 9.1 users
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/upgrade/uct/CUCM_BK_U
CT_Admin_Guide.html
• Collect data to compare UCT analysis to software purchases & UCSS. If there appear to

be significant differences or questions, do further analysis.
Determine how the UCT analysis of users compares to UCSS users on contract. If additional information on UCSS
Contract is needed, contact the UCSS Support team ucss-support@external.cisco.com
If you have questions about the data or the process, send an email to ctglicensing@cisco.com


Cisco Confidential

46

PLANNING
• Plan user license migration
Cisco will generate migration license to match current configuration but will modify the NextGen UCSS/ESW contracts & Install
Base records to reflect the 9.1 users on the migration license. This means that the cost of UCSS and ESW could increase if more,
or different types of, users are migrated than had been purchased earlier.
If CUWL was purchased then CUWL licenses will be issued during the migration. Do NOT consider Unused DLU’s in your
migration planning. Cisco will address through the migration.
If CUWL was purchased, and the total number of users exceeds the number of CUWL licenses purchased, licenses will be issued
to cover those users configured on the earlier release. The renewal quote for Nextgen UCSS/ESW will include these additional
users unless it can be determined some number of users are not associated with devices. Those customers where extension
mobility has not been associated to a user are requested to run on release 9.1.1(a) or higher.
If CUWL was not purchased, note the number of unused DLU’s that are available and discuss with the customer whether they want
to allocate the DLU’s to 9.1 UCL users or return some/all of the unused DLU’s to Cisco. Recommendation is to convert unused
DLU’s to Enhanced @ 6 DLU’s/user. Note: that there will be NO REFUND for returned DLU’s but the customer is saving on future
services charges that they would otherwise pay on the licensed users generated from those unused DLU’s.
Note the differences between what has been configured and current UCSS users on contract and estimate if there will be an
increase in UCSS/ESW cost
Decide on desired 9.1 license configuration – IMPORTANT: Disposition of unused DLU’s must be decided at time of migration and
all unlicensed DLU’s must be licensed in the pre-9.x release of Communications Manager. Changes to the migrated license cannot
be made after migration is complete.


Cisco Confidential

47

INSTALL SOFTWARE
• Migrate existing deployment to 9.1 release
Obtain the software for UC Manager 9.1 with ELM either through the Product Upgrade Tool
(http://tools.cisco.com/gct/Upgrade/jsp/index.jsp) or through the Cisco ordering tools.

Migrate the existing deployment to 9.1
(http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/elmuserguide/9_1_1/license_migration/CUCM_BK_CBF8B56A
_00_cucm-license-upgrade-guide.html). If platform migration is not possible, install 9.1 independently.

• Install & configure Enterprise License Manager (ELM)

•
•
•
•

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/elmuserguide/9_1_1/CUCM_BK_E
DEFFAEB_00_enterprise-license-manager-user-91.html
Provision all users and devices on the 9.1 system (have 60 day grace period before license
is needed)
Provision all users and devices on the 9.1 system (There is a 60-day grace period before
license compliance/installed valid licenses are required).
Add the product instances to the ELM product inventory, test connection, and synchronize.
From the ELM, generate a License Request, and save it to a text file.


Cisco Confidential

48

REQUEST LICENSE
• Submit a case to the Global Licensing Operation (GLO) by sending an email to licensing@cisco.com with

this information:
Title: License Migration to 9.1
Documentation showing current usage/configuration:
License Count Tool (UCT) analysis in Excel format showing required licenses and unused DLUs allocated to new
licenses
OR ELM license usage report (all users/devices have been fully configured)
OR for CUCM versions 3.x/4.x/5.x (or CME): inventory (qty of each device type), planned user counts (users with no
features, users with mobility enabled) and CUCM license usage screenshot (5.x only)

Entitled UCSS/ESW Contract number(s) or proof of purchase of a version upgrade
Site information (name-all name permutations, City, state, country) for contract update
Email address(es) to send license and software support contract updates
ELM Generated License Request (in .txt file as an attachment)
MAC address/Licensing MAC from existing publisher server(s)
If a UCL customer, how customer wants to allocate unused DLU’s


Cisco Confidential

49

REQUEST LICENSE, Cont.
• Receive 9.1 license from GLO. An email will be sent explaining the quantities that have been issued.
If after reviewing the user quantities that were issued, the customer decides that the quantities are too high because they do not
wish to pay support on that many users, please send an email to ctglicensing@cisco.com and request changes. IMPORTANT: no
refunds will be given for any reduction in licensed users.

• Cisco will adjust current Software Service contract product records to reflect the 9.1 users that have been

licensed. This will not impact partner renewal metrics , but it may impact the value of the renewal. The
person receiving the license will be sent an email on the Contract record update to 9.1 user quantities.

ONGOING DEPLOYMENT
• Install license in ELM

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/elmuserguide/9_1_1/CUCM_BK_EDEFFAEB_0
0_enterprise-license-manager-user-91.html
• 90 days prior to UCSS/ESW contract end, generate a renewal quote for the customer based on 9.1 user

quantities that we previously update on the contract records


Cisco Confidential

50

Release Notes for Cisco Unified Communications Manager, Release 9.0
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/9_0_1/CUCM_BK_RF912712_00_cu
cm-release-notes-90.html
Release Notes for Cisco Unified Communications Manager, Release 9.1
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/9_1_1/CUCM_BK_R6F8DBD4_00_r
elease-notes-for-cucm-91.html
Cisco Unified Communications Manager Features and Services Guide, Release 9.1(1)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_1_1/ccmfeat/CUCM_BK_C3E0EFA0_
00_cucm-features-services-guide-91.html

Cisco Unified Communications Manager 9.1 Migration and Upgrade Guide
Enterprise License Manager User Guide, Release 9.1(1)
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/elmuserguide/9_1_1/CUCM_BK_EDEFFAEB_
00_enterprise-license-manager-user-91.html

Using Cisco Unified Communications Manager License Count Utility
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/upgrade/uct/9_1_1/CUCM_BK_U0AE00F5_00
_uct-admin-guide.html


Cisco Confidential

51

Thank you.


Cisco Confidential

52

Uc 9.1 licensing and license migration

More Related Content

What's hot (20)

Similar to Uc 9.1 licensing and license migration (20)

More from Michael Ganschuk (17)

Recently uploaded (20)

Uc 9.1 licensing and license migration