Редукторы конические Unimec
0 likes260 views
UNIMEC has designed and manufactured bevel gearboxes for 28 years using in-house technology and mechanical solutions. They offer 9 sizes, multiple mounting configurations, ratio ranges up to 1/12, and customized designs. The cubic shape allows universal mounting and versatility in shaft and motor choices. High efficiency and low noise are achieved through spiral tooth gears and thermal treatments, positioning UNIMEC as a leader in this sector.
Редукторы конические Unimec
- 1. UNIMEC bevel gearboxes have been designed and manufactured since 28 years using an in- the van technology and mechanical solutions according to the state of the art to be able to meet the growing requirements of a demanding and sophisticated market. Nine sizes, tenths of mounting schemes,a range of serial ratios up to 1/12 and the possibility of a customized design having no equal, make of UNIMEC a reliable partner in the field of the motion transmission. The practical cubic shape of bevel gearboxes allows universal mounting possibilities on every kind of machines. Bevel gearboxes are also very versatile with regard to the shafts choice and the possibility of a direct mounting on any kind of motors, from the normal IEC to brushless motors, to pneumatic motors and so on. High running efficiency, low noise are the logical consequences of the application of Gleason® type spiral teeth conical gears; the use of this kind of geometry and suitable thermal treatments place UNIMEC’s bevel gearboxes on top of this mechanical sector. 164 Bevel gear boxes
- 2. 165
- 3. RC Hollow shaft bevel gearboxes. Ratios: 1/1 - 1/1,5 - 1/2 - 1/3 - 1/4. RR Hollow shaft bevel gearboxes with reinforced hub shaft. Ratios: 1/1 - 1/1,5 - 1/2 - 1/3 - 1/4. RB Broached hollow shaft bevel gearboxes Ratios: 1/1 - 1/1,5 - 1/2 - 1/3 - 1/4. RA Hollow shaft bevel gearboxes with shrink- disks. Ratios: 1/1 - 1/1,5 - 1/2 - 1/3 - 1/4. RS Protruding shaft bevel gearboxes. Ratios: 1/1 - 1/1,5 - 1/2 - 1/3 - 1/4. RP Protruding shaft bevel gearboxes with reinforced hub shaft. Ratios: 1/1 - 1/1,5 - 1/2 - 1/3 - 1/4. RX Double hub bevel gearboxes. Ratios: 1/1 - 1/1,5 - 1/2 - 1/3 - 1/4. RZ Double hub bevel gearboxes with reinforced shafts. Ratios: 1/1 - 1/1,5 - 1/2 - 1/3 - 1/4. 198 199 200 201 202 203 204 205 Application samples are online at www.unimec.eu - section Applications166 198 199 200 201 202 203 204 205
- 4. REA High reduction hollow shaft bevel gearboxes with shrink-disks. Ratios: 1/4,5 - 1/6 - 1/9 - 1/12. RES High reduction bevel gearboxes with protruding shaft. Ratios: 1/4,5 - 1/6 - 1/9 - 1/12. RHC Inverted bevel gearboxes with hollow shaft. Ratios: 1/2 - 1/3. RM Bevel gearboxes with fast double shaft – multiplier version. Ratios: 1/1,5. RIS Protruding shaft bevel gearboxes with inverter. Ratios: 1/1 - 1/2. REC High reduction bevel gearboxes with hollow shaft. Ratios: 1/4,5 - 1/6 - 1/9 - 1/12. REB High reduction bevel gearboxes with broached hollow shaft. Ratios: 1/4,5 - 1/6 - 1/9 - 1/12. 210 211 212 206 207 208 209 Application samples are online at www.unimec.eu - section Applications 167 productionline 210 211 212 206 207 208 209
- 5. RHB Inverted gearboxes with broached hollow shaft. Ratios: 1/2 - 1/3. RHA Inverted bevel gearboxes with hollow shaft with shrink-disks. Ratios: 1/2 - 1/3. RHS Inverted bevel gearboxes with protruding shaft. Ratios: 1/2 - 1/3 - 1/4,5. MRC Hollow shaft motor-gearboxes. Ratios: 1/1 - 1/1,5 - 1/2 - 1/3 - 1/4. MRB Broached hollow shaft motor-gearboxes. Ratios: 1/1 - 1/1,5 - 1/2 - 1/3 - 1/4. MRA Hollow shaft motor-gearboxes with shrink- disks. Ratios: 1/1 - 1/1,5 - 1/2 - 1/3 - 1/4. MRS Protruding shaft motor-gearboxes. Ratios: 1/1 - 1/1,5 - 1/2 - 1/3 - 1/4. MRX Two hub shafts motor-gearboxes. Ratios: 1/1 - 1/1,5 - 1/2 - 1/3 - 1/4. 217 218 219 220 213 214 215 216 Application samples are online at www.unimec.eu - section Applications168 217 218 219 220 213 214 215 216
- 6. Special bevel gearboxesMRZ Two hub shafts bevel gearboxes with reinforced shaft. Ratios: 1/1 - 1/1,5 - 1/2 - 1/3 - 1/4. MRE High reduction motor-gearboxes. Ratios: 1/4,5 - 1/6 - 1/9 - 1/12. Bevel gearboxes with clamps on the motor shaft productionline 221 222 Application samples are online at www.unimec.eu - section Applications 169 221 222