Utc android v1

Unified Testing Criteria
for Android applications
version 1.0: March 2011

This is the Unified Testing Criteria (UTC) against which Android applications can
be tested.

It follows the same format as the UTC for Java ME applications, and has been
compiled by members of the Unified Testing Initiative (UTI).

The UTC will be updated on an ongoing basis as a result of input from the
community and changing platform requirements. UTI welcomes input via the UTI
blog at www.unifiedtestinginitiative.org/blog

Please note that whereas applications that pass the Java ME UTC can then gain
the Java Verified Signature through UTI’s Java Verified programme, there is no
known testing and validation programme for Android apps. However, if your
Android apps pass the relevant tests outlined within this UTC, you can be
confident that they will have reached a high quality standard.

The tests should be performed on a device to which a factory reset has been
applied prior to the installation of the application to be tested. This will ensure that
there is a known base with only pre-installed applications and any errors will be
attributable to the application under test.

It is not within the scope of these criteria to be able to test the performance of the
application on devices with multiple applications installed.

1

Test definitions

1 Install and Launch ....................................................................................... 4
1.1 OTA install ........................................................................................ 4
1.2 Long Launch Time ........................................................................... 5
2 Memory Use ................................................................................................. 6
2.1 Memory during run .......................................................................... 6
3 Connectivity ................................................................................................. 7
3.1 Invalid web access setup ................................................................ 7
3.2 Send/receive data............................................................................. 8
3.3 Network delays and loss of connection ......................................... 9
3.4 Network connectivity – Airplane mode ......................................... 10
4 Event Handling .......................................................................................... 11
4.1 Messaging auto start ..................................................................... 11
4.2 Message queuing ........................................................................... 12
4.3 Timed event expiry ......................................................................... 13
4.4 Timed event expiry during suspend ............................................. 14
4.5 Timed event expiry during application exit .................................. 15
5 Messaging & calls ...................................................................................... 16
5.1 Send ................................................................................................ 16
5.2 Receive ........................................................................................... 17
5.3 Incoming call .................................................................................. 18
6 External Influence ...................................................................................... 19
6.1 Memory card insertion ................................................................... 19
6.2 Memory card insertion and removal ............................................. 20
6.3 Memory card screen behaviour..................................................... 21
7 User Interface............................................................................................. 22
7.1 Readability ...................................................................................... 22
7.2 Read time ........................................................................................ 23
7.3 Screen repainting ........................................................................... 24
7.4 Consistency .................................................................................... 25
7.5 Key layout ease of use................................................................... 26
7.6 Application speed .......................................................................... 27
7.7 Error messages .............................................................................. 28
7.8 Function progress.......................................................................... 29
7.9 Actions while rendering................................................................. 30
7.10 Multiple display format handling................................................... 31
7.11 Differing screen sizes .................................................................... 32
7.12 Multiple format input handling ...................................................... 33
7.13 Accelerometer/motion sensor responses .................................... 34
7.14 Spelling errors ................................................................................ 35
7.15 Technical text errors ...................................................................... 36
8 Language.................................................................................................... 37
8.1 Correct operation ........................................................................... 37
8.2 Manual selection ............................................................................ 38
8.3 Supported formats ......................................................................... 39
8.4 International characters................................................................. 40
9 Performance............................................................................................... 41
9.1 Suspend/resume from main menu ................................................ 41
9.2 Suspend while executing............................................................... 42
9.3 Resume ........................................................................................... 43
9.4 Influence on terminal system features ......................................... 44
9.5 Resource sharing - database ........................................................ 46
10 Media .......................................................................................................... 47
10.1 Application mute option ................................................................ 47

2

10.2 Settings statuses understandable ................................................ 48
10.3 Settings do not impair application ................................................ 49
10.4 Settings combinations ................................................................... 50
10.5 Saving settings............................................................................... 51
10.6 Specific functions .......................................................................... 52
11 Menu ........................................................................................................... 53
11.1 Help and about ............................................................................... 53
11.2 Valid actions ................................................................................... 55
12 Functionality .............................................................................................. 56
12.1 Functionality sanity check............................................................. 56
12.2 Application hidden features .......................................................... 57
13 Keys ............................................................................................................ 58
13.1 Scrolling in menus ......................................................................... 58
13.2 Selection key .................................................................................. 59
13.3 Text field scrolling ......................................................................... 60
13.4 Pause .............................................................................................. 61
13.5 Simultaneous key presses ............................................................ 62
13.6 Multi key presses ........................................................................... 63
14 Device Specific Tests ................................................................................ 64
14.1 Device close ................................................................................... 64
14.2 Device open .................................................................................... 65
15 Stability ...................................................................................................... 66
15.1 Application stability ....................................................................... 66
15.2 Application behaviour after forced close ..................................... 67
16 Data Handling ............................................................................................ 68
16.1 Save game state ............................................................................. 68
16.2 Data deletion .................................................................................. 69
16.3 Modify record ................................................................................. 70
17 Security ...................................................................................................... 71
17.1 Encryption ...................................................................................... 71
17.2 Passwords ...................................................................................... 72

3

1 Install and Launch

1.1 OTA install

Test ID Test Title
1.1 Lifecycle – OTA install
Test Description
The Application must install via OTA.
Required for:
All applications.
Testing Note
1. If errors occur at installation time, corresponding messages must be
reported by the tester in the test report.
2. If the device does not display the icon, then the user must be able to start
the Application using other means.
3. For carriers that will only accept the installation of Applications from
Android Market, this test cannot be performed until the Application is in
Android Market.

Testing Steps
1. Open the browser Application of the device;
2. Type the URL of the Application file, or navigate to it graphically;
3. Connect to the typed URL / application icon;
4. Accept the installation of the Application.

RESULT:
1. The Application installs to the device.
2. The icon for the Application can be found from the device.
Result of Test

PASS FAIL

4

1.2 Long Launch Time

Test ID Test Title
1.2 Lifecycle – Long launch time
Test Description
Ensure that the Application notifies the user about a long launch time.
Required for:
All applications.
Testing Note

Testing Steps
1. Launch the Application.
2. Observe launch time.

RESULT:
If the Application takes longer than 5 seconds to launch, a progress bar or a
message must be displayed to tell the user what is happening.
Result of Test

PASS FAIL

5

2 Memory Use

2.1 Memory during run

Test ID Test Title
2.1 File System – Memory during run
Test Description
Ensure that the Application correctly handles out of memory exceptions
during Application execution.
Required for:
Application which writes to file system.
Not required for:
Application which does not write to file system.
Testing Note

Testing Steps
1. Operate the Application in such a way so as to force the Application to
write files into the file system.
2. Exit the Application. Fill the file system to its capacity or near it.
3. Operate the Application - try to explore screens and functions, which
access the file system.

RESULT:
1. The Application should handle any out of memory exceptions correctly.
2. Ensure that there is a warning to the user advising about lack of memory
when file is trying to be stored.
Result of Test

PASS FAIL

EXCEPTION(S)

Application does not write to file system.

6

3 Connectivity

3.1 Invalid web access setup

Test ID Test Title
3.1 HTTP – Invalid Network Connection
Test Description
Ensure that the Application can handle the network connection being
invalid / unusable.
Required for:
Application using HTTP network connection.
Not required for:
Application not using HTTP network connection.
Testing Note

Testing Steps
1. Create and use an invalid APN entry
- Open Settings
- Navigate to Wireless Controls – Mobile Networks – Access Point Names.
- Create a new APN with invalid details.
- Save this and select it with the radio button on the Access Point Names
screen.
- Exit the Settings menu

2. Launch the Application

3. Initiate an HTTP network connection from the Application.

RESULT:
The Application should handle this situation and all exceptions correctly.

7

3.2 Send/receive data

Test ID Test Title
3.2 HTTP – Send/receive data
Test Description
Ensure that the Application can connect via a valid Web Access session
setup and send/receive data via an HTTP network session.
Required for:
Application using HTTP network connection.
Not required for:
Application not using HTTP network connection.
Testing Note

Testing Steps
1. Create a valid Web Access session setup.
3. Initiate an HTTP network connection from the Application.
4. Conduct some action which ensures a data transfer action via the Network
Connection.

RESULT:
1. The Application data is properly sent/received over the network (check it for
each Application screen or feature that uses data services).

Result of Test

PASS FAIL

EXCEPTION(S)

Application does not use HTTP network connection.

8

3.3 Network delays and loss of connection

Test ID Test Title
3.3 Network connectivity - Network delays
and the loss of connection
Test Description
When the Application uses network capabilities, it must be able to
handle network delays and any loss of connection.
Required for:
Application which uses Network Connection.
Not required for:
Application which does not use Network Connection.
Testing Note

Testing Steps
2. Start the network access from the Application.
3. Put the phone in a place where there connection will be lost.
4. Observe the result.

RESULT:
The Application will work until time out and then give an error message to the
user indicating there was an error with the connection.
Result of Test

PASS FAIL

EXCEPTION(S)

The Application does not use Network Connection.

9

3.4 Network connectivity – Airplane mode

Test ID Test Title
3.4 Network connectivity - Airplane mode
Test Description
When the Application uses network capabilities, it must be able to
handle the device being in Airplane mode
Required for:
Application which uses Network Connection.
Not required for:
Application which does not use Network Connection.
Testing Note

Testing Steps
1. Set the device to Airplane mode
2. Start the Application.

RESULT:
The Application will give a meaningful error message to indicate that the
device is in Airplane mode and the application cannot run successfully.
Result of Test

PASS FAIL

EXCEPTION(S)

The Application does not use Network Connection.

10

4 Event Handling

4.1 Messaging auto start

Test ID Test Title
4.1 Messaging – Auto start and process
Test Description
Ensure that the Application starts correctly on receipt of Application
specific SMS
Required for:
Application which is started by Application-specific SMS.
Not required for:
Application which is not started by Application-specific SMS.
Testing Note

Testing Steps
1. Ensure that the Application is not running.
2. Send an SMS message which meets the Application specification to the
test handset on the correct port number.

RESULT:
1. The Application should launch correctly.
2. The Application should process the incoming message correctly.
Result of Test

PASS FAIL

EXCEPTION(S)

The Application does not use Application-specific SMS to start.

11

4.2 Message queuing

Test ID Test Title
4.2 Messaging – Message queuing
Test Description
Ensure that the Application Queues Application-specific SMS messages
for processing.
Required for:
Application which uses Application-specific SMS messages.
Not required for:
Application which does not use Application-specific SMS messages.
Testing Note

Testing Steps
Repeat test Messaging – Auto start and process several times in quick
succession.

RESULT:
The Application should queue the messages and then correctly process the
queued messages.
Result of Test

PASS FAIL

EXCEPTION(S)

The Application does not use Application-specific SMS messages.

12

4.3 Timed event expiry

Test ID Test Title
4.3 Timed Event – Expiry during Application
run
Test Description
Ensure that the Application behaves correctly on expiry of a timed event
while the Application is running.
Required for:
Application which uses timed events.
Not required for:
Application which does not use timed events.
Testing Note

Testing Steps
1.Set a timed event in the Application for a specific “future” time
2. Keep the Application in an active state.
3. Allow the “future” time to pass.

RESULT:
Ensure that Application reacts correctly once the designated time has
expired.
Result of Test

PASS FAIL

EXCEPTION(S)

The Application does not use timed events.

13

4.4 Timed event expiry during suspend

Test ID Test Title
suspend
Test Description
Ensure that the Application resumes correctly from a suspended state
on expiry of a timed event.
Required for:
Not required for:
Testing Note

Testing Steps
1. Set a timed event in the Application for a specific “future” time
2. Suspend the Application
3. Allow the “future” time to pass.

RESULT:
Ensure that the application resumes correctly once the designated time has
expired, and then ensure that the Application behaves correctly after being
resumed.
Result of Test

PASS FAIL

EXCEPTION(S)


14

4.5 Timed event expiry during application exit

Test ID Test Title
exit
Test Description
Ensure that the Application starts correctly from an exited state on
expiry of a timed event.
Required for:
Not required for:
Testing Note

Testing Steps
1. Set a timed event in the Application for a specific time
2. Exit the Application

RESULT:
1. Application starts, or user is presented with a start option once the
designated time has expired.
2. Application behaves correctly when started.
Result of Test

PASS FAIL

EXCEPTION(S)


15

5 Messaging & calls

5.1 Send

Test ID Test Title
5.1 Message – Send
Test Description
Ensure that the Application can send messages successfully.
Required for:
Application which sends SMS or MMS messages as part of its functions.
Not required for:
Application which does not send SMS or MMS messages as part of its
functions.
Testing Note

Testing Steps
1. Launch Application.
2. Send a message from the Application to another handset – if both SMS
and MMS are supported, test both formats.

RESULT:
1. Notification of new message is given where enabled on the receiving
handset.
2. Message is in the correct format, and for MMS contains the correct
payload.
Result of Test

PASS FAIL

EXCEPTION(S)

Application does not send messages as part of its functions.

16

5.2 Receive

Test ID Test Title
5.2 Message – Receive
Test Description
Ensure that the Application can receive messages successfully.
Required for:
Application which receives SMS or MMS messages as part of its
functions.
Not required for:
Application which does not receive SMS or MMS messages as part of its
functions.
Testing Note

Testing Steps
1. Launch the Application (with sound on).
2. Compose message at another phone and send it to the test handset – if
the application supports both SMS and MMS, test both formats.

RESULT:
1. Notification of new message is given where enabled on the receiving
handset.
2. Message is in the correct format, and for MMS contains the correct
payload.
Result of Test

PASS FAIL

EXCEPTION(S)

Application does not receive messages as part of its functions.

17

5.3 Incoming call

Test ID Test Title
5.3 Telephone call – incoming while
application in use
Test Description
If the user accepts an incoming phone call while the Application is
running, it should be possible to resume from the same point in the
Application at the end of the call, or a logical re-starting point.
Required for:
All applications.
Testing Note

Testing Steps
1. While Application is running, make an incoming call to the test handset.
2. Accept the incoming call.
3. End the incoming call.
4. Return to the Application.

RESULT:
1. The incoming call dialog is shown.
2. After the call is taken and ended, the Application should resume to either
the point of interruption, or a point which neither inconveniences the user nor
causes data loss.
Result of Test

PASS FAIL

18

6 External Influence

6.1 Memory card insertion

Test ID Test Title
6.1 Memory Card - Insertion
Test Description
Ensure that the Application works correctly following a memory card
insertion action when the Application is suspended and resumed.
Required for:
All applications, on device which supports removable memory cards.
Not Required for:
Device which does not support removable memory cards.
Testing Note

Testing Steps
2. Suspend Application
3. Insert the memory card into the phone, and mount the card.
4. Fill the card to its capacity
5. Unmount the memory card.
6. Resume and operate the Application

RESULT:
The Application continues to operate as designed based on the Application
specification and is not affected by the memory card insertion or
mounting/unmounting.
Result of Test

PASS FAIL

EXCEPTION(S)

Device does not support removable memory cards.

19

6.2 Memory card insertion and removal

Test ID Test Title
6.2 Memory Card – Insertion and removal
Test Description
Ensure that the Application works correctly during a memory card
insertion and removal.
Required for:
All applications, on device which supports removable memory cards.
Not Required for:
Device which does not support removable memory cards.
Testing Note

Testing Steps
2. Insert and remove the memory card.
3. Verify that Application works correctly.

RESULT:
1. The Application should work correctly following memory card insertion.
2. The Application should work correctly with memory card removed.
Result of Test

PASS FAIL

EXCEPTION(S)


20

6.3 Memory card screen behaviour

Test ID Test Title
6.3 Memory Card – screen behaviour
Test Description
Ensure that the Application with memory card functional screens works
correctly with memory card inserted and removed.
Required for:
Application which uses memory card.
Not Required for:
1. Device which does not support removable memory cards;
2. Application which does not use memory card, regardless of device
support.
Testing Note

Testing Steps
2. Navigate to screen where Application works with memory card.
3. Insert the memory card.
5. Remove the memory card.

RESULT:
1. The Application should work correctly following memory card insertion.
2. The Application should work correctly following memory card removal.
Result of Test

PASS FAIL

EXCEPTION(S)


Application does not use memory card.

21

7 User Interface

7.1 Readability

Test ID Test Title
7.1 Readability
Test Description
Ensure that the application content is readable.
Required for:
Applications on all devices with user display.
Not Required for:
Devices without user display.

Testing Note
An exception to the requirement for naked-eye legibility may be made where
the applications allows a high level graphical view of an item (eg map or web
page) and the device zoon facility is used to make areas legible, providing
that usability is not impaired by any limiting of the visible areas when zoomed
sufficiently to be legible.

Testing Steps
All screen content must be clear (e.g. screen not crowded with content) and
readable to the naked eye regardless of information displayed, or choice of
font, colour scheme etc.

RESULT:
The application content should be readable.

Result of Test

PASS FAIL

EXCEPTION(S)

Device does not have user display

22

7.2 Read time

Test ID Test Title
7.2 UI – Read time
Test Description
Comfortable time for content reading.
Required for:
All applications.
Testing Note

Testing Steps
Use the application, moving between screens.

RESULT:
Each screen must be visible for the time necessary to comfortably read all its
information.

Result of Test

PASS FAIL

23

7.3 Screen repainting

Test ID Test Title
7.3 UI – Screen repainting
Test Description
Correct screen repainting.
Required for:
All applications.
Testing Note

Testing Steps

RESULT:
1. The Application screens must be correctly repainted, including cases when
edit boxes and dialog boxes are dismissed.
2. There must be no blinking of moving objects and background. If the
Application objects overlap they must still render correctly.

Result of Test

PASS FAIL

24

7.4 Consistency

Test ID Test Title
7.4 UI - Consistency
Test Description
UI consistency.
Required for:
All applications.
Testing Note

Testing Steps

RESULT:
The Application UI should be consistent and understandable throughout, e.g.
common series of actions, action sequences, terms, layouts, soft button
definitions and sounds that are clear and understandable

Result of Test

PASS FAIL

25

7.5 Key layout ease of use

Test ID Test Title
7.5 UI – Key layout ease of use
Test Description
Key layout ease of use.
Required for:
All Apps.
Testing Note
1. Key layout ease of use should only be tested to the extent that it can be
influenced by the application. Any limitations of the device that cannot be
overcome by application design should be disregarded.
2. Where the device offers multiple input methods (e.g. hardware keypad /
touch screen keypad), all the input methods available during normal use of
the application should be tested.
Testing Steps

RESULT:
1. The buttons should be easy to use.
2. Button usage should be suitable for both a left-handed and right-handed
person, within the physical constraints of the device design.

Result of Test

PASS FAIL

26

7.6 Application speed

Test ID Test Title
7.6 UI - Application speed
Test Description
The Application works in the device it was targeted for, and it is usable
on the device: the speed of the Application is acceptable to the purpose
of the Application and must not alter the user experience by being
uncontrollable.
Required for:
All applications.
Testing Note
The developer / publisher is expected to test the entire Application: for
example, play through the entire game on the target handset. The tester will
only conduct a representative sample test of the Application in different areas
if possible, for a 15 minutes period only.

Testing Steps
1. Use the Application.
2. Observe how fast the Application is to use, and if it is too slow or too fast in
its operation for good usability.
3. If the Application behavior is incontrollable due to its speed, please report
such findings.

RESULT:
1. The Application is usable on the device.
2. The speed of the Application is good enough for the Application usage (i.e.
the Application frame rate or response to user input must remain adequate,
and must not compromise the Application usage, or prevent the user from
progressing normally).
Result of Test

PASS FAIL

27

7.7 Error messages

Test ID Test Title
7.7 UI – Error messages
Test Description
Error messages.
Required for:
All applications.
Testing Note

Testing Steps

RESULT:
1. Any error messages in the Application must be clearly understandable.
2. Error messages must clearly explain to a user the nature of the problem,
and indicate what action needs to be taken (where appropriate).

Result of Test

PASS FAIL

28

7.8 Function progress

Test ID Test Title
7.8 UI – Function progress
Test Description
Visual indication of the function execution progress.
Required for:
All applications.
Testing Note

Testing Steps

RESULT:
1. Any function selected in the Application should start within 5 seconds.
2. There must be some visual indication that the function is being performed.
3. The visual indication can be anything that the user would understand as a
response, e.g.
- prompting for user input;
- displaying splash screens or progress bars;
- displaying text such as “Please wait...”, etc.

Result of Test

PASS FAIL

29

7.9 Actions while rendering

Test ID Test Title
7.9 UI – Actions while rendering
Test Description
Application must not perform inappropriate actions while thinking or
rendering
Required for:
All applications.
Testing Note

Testing Steps
Make user input while the Application or handset is busy processing or
rendering.

RESULT:
There must be no inappropriate reaction by the Application.

Result of Test

PASS FAIL

30

7.10 Multiple display format handling

Test ID Test Title
7.10 UI – Multiple Display Format Handling
Test Description
Where the device and Application can display in multiple formats (e.g.
portrait / landscape, internal / external display), the elements of the
application should be correctly formatted in all display environments.
Required for:
Applications that support multiple display formats, on device with
multiple display formats support.
Not required for:
1. Device which does not have multiple display formats;
2. Applications that do not support multiple display formats, regardless
of device support.
Testing Note
For this test, a failure would be a gross error that makes the application
difficult to use, or is seriously misleading in some way. Minor errors that do
not impede functionality should be passed, but the details added to the Result
of Test information as a text note.

Testing Steps
Operate the Application and make use of all available display formats in
multiple functions.

RESULT:
The Application should display correctly without obvious errors in all formats.
Result of Test

PASS FAIL

EXCEPTION(S)

Device does not support multiple display formats.

Application does not support multiple display formats by design.

31

7.11 Differing screen sizes

Test ID Test Title
7.11 UI – Differing screen sizes
Test Description
Where the application is designed to work on multiple devices it must
be able to display correctly on differing screen sizes
Required for:
Applications that support multiple devices
Not required for:
Applications that target specific devices
Testing Note
For this test, a failure would be the inability to display correctly on devices
with different screen sizes.

Testing Steps
Operate the Application on two devices with differing screen sizes.

RESULT:
The Application should display correctly without obvious errors.
Result of Test

PASS FAIL

EXCEPTION(S)

Application does not support multiple devices.

32

7.12 Multiple format input handling

Test ID Test Title
7.12 UI – Multiple Format Input Handling
Test Description
Where the device and application can accept input in multiple formats
(e.g. external touchscreen / external keypad / internal touchscreen /
internal keypad / QWERTY layout / 12-key layout and others), the
application must work correctly with all supported input methods.
Required for:
Applications that support multiple input formats, on device with multiple
input format support.
Not required for:
1. Device which does not have multiple input formats;
2. Applications that do not support multiple input formats, regardless of
device support.
Testing Note
For this test, a failure would be a gross error that makes the application
difficult to use, or is seriously misleading in some way. Minor errors that do
not impede functionality should be passed, but the details added to the Result
of Test information as a text note.

Testing Steps
Operate the Application and make use of all input methods in all functions.

RESULT:
The Application should accept input correctly in all supported formats.
Result of Test

PASS FAIL

EXCEPTION(S)

Device does not support multiple input formats.

Application does not support multiple input formats by design.

33

7.13 Accelerometer/motion sensor responses

Test ID Test Title
7.13 UI – Accelerometer / Motion Sensor
Responses
Test Description
The response of the application to movement or change of alignment of
the device should not impair use of the application, nor be likely to
confuse the user.
Required for:
All Applications, except where both device and Application lack
accelerometer / motion sensor support.
Not required for:
Application where both it and the device lack accelerometer / motion
sensor support.
Testing Note
1. Testing should be performed even where either the device or the
Application (but not both) lack accelerometer support, in order to determine
any unexpected reaction to the presence or absence of motion sensor
responses.
2. Minor hesitations or inaccuracies are permissible. To fail, the problems
must be serious enough to make it difficult to use the application.
3. The device could have adjustable orientation (accelerometer rotation)
found in SettingsSound & DisplayDisplay Settings. Try checking the box
labelled “Orientation” to switch orientation automatically when rotating phone.

Testing Steps
Operate the Application and make use of functions while changing the
position, angle and alignment of the device and subjecting it to slow, rapid,
and random movements.

RESULT:
The response of the application to movement or change of alignment of the
device should not impair use of the application, nor be likely to confuse the
user. Application should change between portrait and landscape modes
without confusing errors being displayed to user.
Result of Test

PASS FAIL

EXCEPTION(S)

Device not equipped with accelerometer / motion sensor.

Application does not make use of accelerometer / motion sensor.

34

7.14 Spelling errors

Test ID Test Title
7.14 UI - Spelling errors
Test Description
The Application must be free of spelling errors.
Required for:
All applications.
Testing Note
1. A spelling error is defined as a strict mis-spelling of a word (no grammar
or punctuation rules will be applied). Missing diacritics and accents (e.g.
acutes, cedillas, umlauts etc) will not be reported as spelling errors.
2. The tester will perform the test as specified below, but the developer must
ensure that this requirement is fulfilled throughout the Application.
3. In all cases, spelling shall be acceptable if it conforms to the norm for a
selected language or location.
4. For generic English, US spelling is to be regarded as the norm, but British
spelling will be acceptable so long as the chosen spelling is used
throughout.

Testing Steps
1. Launch Application in target language.
2. Check text appearing in:
a) Splash/Title/Logo/Loading Screen;
b) Main Menu and all its subsidiary menus;
c) Help/Instructions Screen(s);
d) About screen;
e) Application Pause Menu and all its subsidiary menus (if present).

RESULT:
No spelling errors must be present in the defined areas.
Result of Test

PASS FAIL

35

7.15 Technical text errors

Test ID Test Title
7.15 UI - Technical text errors
Test Description
The text in the Application must be clear and readable.
The Application must be free of technical text display issues such as:
Text cut off / Text overlapping.
Required for:
All applications.
Testing Note
1. The tester will perform the test as specified below, but the developer must
2. All text in each target language is displayed without corruption, distortion
or other display problems. Examples of failures may include:
a) Menu item text labels incorrectly aligned with cursor;
b) Button text label over-running the button area or truncated such
that its meaning is not clear;
c) Text over-running or being truncated in other bounded text display
areas (e.g. speech bubbles, user interface elements etc);
d) Text not wrapping at the edge of the screen resulting in words
being cut off;
e) Multiple pieces of text overlapping each other, or text overlapping
user interface elements (but see note 3 below);
f) Text being cut horizontally.
3. Text overlapping user interface elements may be allowable where
a) The developer has stated that this is by design, and
b) There is no impairment of the user experience.

Testing Steps
1. Launch Application in target language.
2. Check text appearing in:
a) Splash/Title/Logo/Loading Screen;
b) Main Menu and all its subsidiary menus;
c) Help/Instructions Screen(s)
d) About screen;
e) Application Pause Menu and all its subsidiary menus (if present).

RESULT:
All text located in the specified areas is shown without technical display
issues that hinder legibility.
Result of Test

PASS FAIL

36

8 Language

8.1 Correct operation

Test ID Test Title
8.1 Language – Correct operation
Test Description
Ensure that the Application works correctly with all appropriate
languages.
Required for:
All applications.
Testing Note
1. Translation table with all text used in UI should be provided to Test team
before testing starts.

Testing Steps
1. If handset supports more than one language, set handset to a language not
already tested in certification testing.
2. Launch the Application and perform brief testing with aim to go through all
possible screens, menu, messages.
3. If Application Specification specifies that Application detects selected
handset language, ensure Application displays appropriate for each
supported language.
4. Exit the Application
5. Repeat steps 1 to 4 for each supported language.

RESULT:
1. All text content is rendered in the correct/expected language.
2. Ensure Application detects correct language and renders content as
appropriate (if applicable).
Result of Test

PASS FAIL

37

8.2 Manual selection

Test ID Test Title
8.2 Language – Manual selection
Test Description
Ensure that the Application allows selection of languages.
Required for:
Application which allows selection of languages within the Application.
Not Required for:
Application that does not permit selection of languages within the
Application.
Testing Note

Testing Steps
1. Set Application to each language using language selection facility of the
Application.
2. Perform brief testing.

RESULT:
1. User is able to select all desired languages.
2. All text content is rendered in the correct/expected language.
Result of Test

PASS FAIL

EXCEPTION(S)

Application does not permit selection of languages.

38

8.3 Supported formats

Test ID Test Title
8.3 Language – Supported formats
Test Description
Ensure that the Application supports all date/time/numeric/currency
features for supported languages
Required for:
All applications.
Testing Note

Testing Steps
Verify that date, time, time zone, week start, numeric separators and
currency, are formatted appropriately for the implemented language’s target
country and supported throughout the Application.

RESULT:
All text content relating to date/time/numeric/currency fields are rendered in
the correct/expected language format.
Result of Test

PASS FAIL

39

8.4 International characters

Test ID Test Title
8.4 Language – International characters
Test Description
Ensure that the Application accepts and displays all appropriate
international characters correctly.
Required for:
All applications.
Testing Note

Testing Steps
Verify that all data entry fields accept and properly display all International
characters.

RESULT:
All international text characters are rendered in the correct/expected
language.
Result of Test

PASS FAIL

40

9 Performance

9.1 Suspend/resume from main menu

Test ID Test Title
9.1 Lifecycle – Suspend / resume from main
menu
Test Description
Ensure that the Application suspends when at the Application main
menu.
Required for:
All applications.
Testing Note

Testing Steps
2. Go to the main menu of the Application.
3. Suspend the Application
4. Resume the Application

RESULT:
Application should suspend and resume correctly, and resume at a point that
does not impair the user experience.
Result of Test

PASS FAIL

41

9.2 Suspend while executing

Test ID Test Title
9.2 Lifecycle – Suspend while executing
Test Description
Check for Suspend in the middle of Application execution.
Required for:
All applications.
Testing Note

Testing Steps
2. During Application execution, suspend the Application

RESULT:
Application should suspend and resume correctly, and resume at a point that
does not impair the user experience.
Result of Test

PASS FAIL

42

9.3 Resume

Test ID Test Title
9.3 Lifecycle - Resume
Test Description
Ensure that the Application resumes correctly.
Required for:
All applications.
Testing Note
The objective of this test is to confirm the application’s stability when
suspended and resumed multiple times from different locations in one test
cycle.
Testing Steps
1. Perform Lifecycle – Suspend / resume from main menu
4. Perform Lifecycle – Suspend while executing
5. Repeat step 2.

RESULT:
The Application resumes to the point where it was suspended, or to a point
that does not impair the user experience.
Result of Test

PASS FAIL

43

9.4 Influence on terminal system features

Test ID Test Title
9.4 Lifecycle - Influence on Terminal System
Features
Test Description
Application must correctly handle situations where following user input,
or some external event (e.g. a phone call), it is switched to the
background by the terminal. Upon returning to foreground the
Application must resume its execution correctly. While in the
background the Application must not emit any audio (unless it is part of
its specific purpose to do so) and all handset functions should remain
intact.
While being in the background, the Application must either not affect
the use of the system features or other Applications or, if the
Application does so, such behaviour must be described in the help file.
Not Required for:
Application which is not written to run as a Service.
Required for:
Application which is written to run as a Service.
Testing Note
1. When performing the test below, the Application either needs to be
switched to background or foreground. The actual method used depends on
the functionality of the target terminal
2. If features are found to be disabled or not able to be used and are not listed
in the help file the Application must fail this test.
3. The developer should be asked whether the Application is written to run as
a Service, and the answer should determine whether this test is applicable.

Testing Steps
2. Familiarize yourself with the help file.
3. Switch Application to background while the Application is running and in
each of the following locations within the Application:
- During initial loading of the Application
- Main Menu
- In the process of normal Application usage
- In the process of loading data from the network (where applicable)
- In pause state (where applicable).
4. Try using system features and Applications of the terminal (Phone
Application, Calendar, Clock, Contacts, Browser, etc). In particular try the
following:
- make a voice call
- make a video call (if supported by terminal)
- send an SMS message
- send an MMS message
- open a WAP and WEB page (if supported by terminal)
- start a streaming session using a WEB browser or media player.
5. Verify that terminal’s system features and Applications can still be used
normally, and where this is not the case, the Application’s help file describes
the situation adequately to the user. Verify also that the Application does not
emit any audio (unless this is its specific purpose by design).
6. Switch the Application back to the foreground.

44

Test ID Test Title
9.4 Lifecycle - Influence on Terminal System
Features
7. Verify that the Application operates normally by using it for a time period of
5 minutes.

RESULT:
1. Terminal’s system features and Applications can be used normally
2. In case the Application execution causes some changes to normal use of
system features and Applications, this is adequately explained in the help file
of the Application.
3. After the Application is brought back to foreground, it continues to operate
normally.
Result of Test

PASS FAIL

EXCEPTION(S)

Application is not written to run as a Service.

45

9.5 Resource sharing - database

Test ID Test Title
9.5 Lifecycle - Resource Sharing – Database
Test Description
Check that database resources are properly shared between Application
and a competing Application.
Required for:
Applications which make use of Contacts database.
Not required for:
Applications which do not make use of Contacts database.
Testing Note
Application under test should not be the device native Contacts application.

Testing Steps
2. Suspend Application
3. Launch the device Contacts application
4. Add a new entry into contacts.
5. Remove an existing entry from contacts.
6. Resume the Application under test
7. Check Application state.

RESULT:
1. Application should continue from the previous state prior to being
suspended.
2. Application should see the new entry and the deleted entry.
Result of Test

PASS FAIL

Application does not use Contacts database.

46

10 Media

10.1 Application mute option

Test ID Test Title
10.1 Media – Application mute option
Test Description
Ensure that the Application has a Mute or Sound On / Off setting.
Required for:
Applications with sound settings.
Not Required for:
Application which is declared not to have a Application mute facility by
design.
Testing Note
It will be sufficient for the application to respect the settings of the device
volume controls, such that sound can be turned down to zero before the
application launches, and the application then makes no sound.

Testing Steps
Use the application and note the effects of either muting the device via the
device volume controls or via a menu setting.

RESULT:
Application must provide a means of muting background music and / or sound
effects.

Result of Test

PASS FAIL

EXCEPTION(S) (Note that both Exceptions may be selected if appropriate)

Application does not have Application mute facility by design.

Application does not have any settings options.

47

10.2 Settings statuses understandable

Test ID Test Title
10.2 Media – Settings statuses
understandable
Test Description
Ensure that the Application settings statuses are easily understandable.
Required for:
Applications which have Settings options.
Not required for:
Applications which do not have Settings options.
Testing Note

Testing Steps
1. Start the application.
2. Change the status of settings

RESULT:
The current status of each setting must be easily understood.

Result of Test

PASS FAIL

EXCEPTION(S)


48

10.3 Settings do not impair application

Test ID Test Title
10.3 Media – Settings do not impair
Application
Test Description
The status of the Application settings does not impair the Application
functionality.
Required for:
Not required for:
Testing Note

Testing Steps
1. Start the application
2. Change settings

RESULT:
The current status of the settings does not affect the Application operation
(e.g. whether or not the sound is on in a game). For example, switching off
the sound does not change the game's functionality.
Result of Test

PASS FAIL

EXCEPTION(S)


49

10.4 Settings combinations

Test ID Test Title
10.4 Media – Settings combinations
Test Description
Restrictive combinations of Application settings is not permitted.
Required for:
Not required for:
Testing Note

Testing Steps
5. Change settings

RESULT:
Each setting has separate enable/disable functionality (e.g. Vibration and
Sound). Any combinations of settings (e.g., Vibration and Sound) should not
limit the user’s choice so as to exclude specific combinations.

Result of Test

PASS FAIL

EXCEPTION(S)


50

10.5 Saving settings

Test ID Test Title
10.5 Media – Saving settings
Test Description
Ensure that the Application saves all settings on exit.
Required for:
Not required for:
1. Applications which do not have Settings options;
2. Applications which do not save changes to Settings by design.
Testing Note

Testing Steps
2. Change an item in settings
3. Exit and restart the application
4. Observe the setting status

RESULT:
When an Application exits, all settings must be saved.
Restarting the Application will restore the saved settings.

Result of Test

PASS FAIL

EXCEPTION(S)


Application is declared not to save settings on close by design.

51

10.6 Specific functions

Test ID Test Title
10.6 Media – Specific functions
Test Description
Ensure Application sounds have specific functions and should not be
over utilised.
Required for:
Applications with sound.
Not required for:
Applications without sound.
Testing Note

Testing Steps
Use the application and observe the sounds utilised

RESULT:
Each sound should have a specific function, and should not be over used
(e.g. game completing with a minute of random noise is not permitted).

Result of Test

PASS FAIL

EXCEPTION(S)

Application does not have any sounds.

52

11 Menu

11.1 Help and about
Test ID Test Title
11.1 Menu Structure – Help & About items
Test Description
The Application should contain standard Menu items Help & About.
Required for:
Applications with user interface capable of displaying information to
user.
Not required for:
Applications without user interface capable of displaying information to
user.
Testing Note 1
It is a requirement that applications with a user interface should contain Help
information, to explain to the user how the Application works; and About
information, so that the user can easily identify the exact version of the
Application installed, the developer of the Application, and the developer
contact details.
Testing Note 2
This test can be passed if the application contains the information in Testing
Note 1 and it is easy to access, even if the items are not named exactly as in
the test steps. The tester should indicate in their report if the application has
passed this test on a value judgement like this, rather than a literal
interpretation of the test steps.
Testing Note 3
If it is clear that the application’s purpose requires network coverage to
operate, then it will be sufficient for the Help to be provided through a browser
connection rather than being contained in the application. In the opposite
case, where most functions of the application can be used while the device is
offline, then the application should have Help that can be accessed without
needing a data connection.
Testing Note 4
Where the amount or type of Help information appears insufficient for easy
use of the application, the tester should give specific instances in their report.

Testing Steps
2. Access the Help and About sections

RESULT:
1. Menu items like Help and About are required to be presented on the main
menu or other easily-found screen of the Application.
About functions should contain the Application version number and author
information.
2. Help should include the aim of the Application, usage of the keys (e.g. for
games) and other instructions. If the text of the help is too long, it should be
divided into smaller sections and/or organized differently.
3. Help must be accurate and consistent with the Application functionality and
the handset specifics.

53

Test ID Test Title continued from previous page
11.1 Menu Structure – Help & About items
Result of Test

PASS FAIL

EXCEPTION(S)

Application has no user menu by design, or the application design /
purpose is such that these items cannot be displayed to the user.

54

11.2 Valid actions

Test ID Test Title
11.2 Menu Options – Valid actions
Test Description
Selected and/or changed Application items should invoke valid actions.
Required for:
All applications.
Testing Note

Testing Steps
1. Start and use application.
2. Observe the results.

RESULT:
All Application items that can be selected and/or changed by user, must
invoke valid actions according with the Application Specifications
Result of Test

PASS FAIL

55

12 Functionality

12.1 Functionality sanity check

Test ID Test Title
12.1 Major Functionality – Sanity check
Test Description
Major Functionality Sanity Check.
Required for:
All applications.
Testing Note

Testing Steps
2. Operate the Application, exploring all screens and functions.
3. Document all instances of non-compliance with Application specifications.
4. Document unexpected functionality outside scope of Application
specifications.

RESULT:
All specific Application functionality such as algorithms, calculations,
measurements, scoring, etc. must be implemented correctly.

Result of Test

PASS FAIL

56

12.2 Application hidden features

Test ID Test Title
12.2 Major Functionality – Application hidden
features
Test Description
The Application does not introduce any hidden features, its functionality
set is consistent with the help and it does not harm the data on the
device.
Required for:
All applications.
Testing Note
1. The tester will perform the test as specified above, but the developer must
2. Allowable functions are:
• Cheat codes
• Unlocking the Application, for example from demo version to a full
version.

Testing Steps
1. Install user’s personal data to the device (for example calendar, contact, to-
do, images, text files, documents, etc).
3. Familiarise yourself with the help file.
4. Use the Application and all of its features for a time period of 15 minutes.
5. Compare the documented Application functionality to the features you find,
and what is in the help file.

RESULT:
1. All the features are introduced in the Help, the Application has no hidden
features.
2. The data inserted to the device has not been corrupted.
3. The phone bill (or log) does not show any additional communication.
4. The phone bill (or log or data counter, if applicable) does not show an
excessive amount of transferred data.
5. The other Applications in the device must run as they did before
Application installation.
Result of Test

PASS FAIL

57

13 Keys

13.1 Scrolling in menus

Test ID Test Title
13.1 Key Press – Scrolling in menus
Test Description
Scrolling in menus.
Required for:
Applications with user interaction.
Not required for:
Applications without user interaction.
Testing Note

Testing Steps
2. Use the keypad or other navigation device to scroll vertically and (if
applicable) horizontally in the Main menu item list.

RESULT:
This MUST scroll in the menu item list with no adverse effects on the
Application.
Result of Test

PASS FAIL

EXCEPTION(S)

Application does not have user interaction by design.

58

13.2 Selection key

Test ID Test Title
13.2 Key Press – Selection key
Test Description
Selection key selects menu items.
Required for:
Not required for:
Testing Note

Testing Steps
2. Press the primary selection key or device equivalent in the main menu item
list.

RESULT:
This MUST select the menu item with no adverse effects on the Application.
Result of Test

PASS FAIL

EXCEPTION(S)


59

13.3 Text field scrolling

Test ID Test Title
13.3 Key Press – Text field scrolling
Test Description
Scrolling in text fields and About / Help screens.
Required for:
Not required for:
Testing Note

Testing Steps
2. Use the scrolling functions of the keypad or other navigation device in a
text dialog, for example: About and Help.

RESULT:
This should scroll vertically and (if applicable) horizontally in the dialog.
Result of Test

PASS FAIL

EXCEPTION(S)


60

13.4 Pause

Test ID Test Title
13.4 Key Press – Pause
Test Description
The Application must support a pause feature in areas of the
Application where immediate user interaction is needed (for example in
game).
The pause feature must support an option to resume the Application,
and an option to go back to the main menu of the Application.
Required for:
Applications requiring time-sensitive user interaction.
Not Required for:
1. Applications where immediate user intervention is not needed (for
example timer Application);
2. Applications without user interaction.
Testing Note
The developer is encouraged to use the available APIs for pause and
continue methods.

Testing Steps
2. Use the Application and its features.
3. Check that the user can pause the Application at any time if so desired.
4. Check that the Application can also be "un-paused".

RESULT:
1. The user can pause the Application and the pause feature must support an
option to resume .
2. All time-specific features of the Application are disabled at the time of the
pause.
3. There is a clear indication that the Application is in a paused state.
4. There is a clear indication how the user can return from the paused state.
Result of Test

PASS FAIL

EXCEPTION(S)

Application does not require immediate user intervention.


61

13.5 Simultaneous key presses

Test ID Test Title
13.5 Key Press – Simultaneous key presses
Test Description
Ensure that the Application copes with simultaneous key presses.
Required for:
Not required for:
Testing Note

Testing Steps
2. Press combinations of keys simultaneously, from a selection of UP,
DOWN, LEFT, RIGHT, CENTER and all other available keys, excepting any
which intentionally terminate or exit the application, or intentionally launch a
function that would invalidate the test.

RESULT:
The Application should not be put into an unusable or incomprehensible state
by simultaneous key presses. Any error messages generated should be
meaningful.
Result of Test

PASS FAIL

EXCEPTION(S)


62

13.6 Multi key presses

Test ID Test Title
13.6 Key Press – Multi key presses
Test Description
If device and application support multi key press operation, these
should perform as expected.
Required for:
Application that supports multi key press actions, on device that also
supports this.
Not required for:
Application or device without support for multi key press.
Testing Note

Testing Steps
2. Use the multi key press actions as documented by the developer in the
Help, or documented separately.

RESULT:
All reactions to multi key presses should be as predicted by the
documentation and should not leave the Application in an unusable state.
Result of Test

PASS FAIL

EXCEPTION(S)


Application does not support multi key press.

Device does not support multi key press.

63

14 Device Specific Tests

14.1 Device close

Test ID Test Title
14.1 Action - Device Close
Test Description
Ensure that the Application while launching handles closing of the
device correctly.
Required for:
Applications on devices with open / close functionality.
Not Required for:
Device without open / close functionality.
Testing Note

Testing Steps
2. While the Application is launching (i.e. "Please wait” screen), close the
device and then 3-4 times quickly open and close it.
3. Open the device.

RESULT:
The Application returns to the same state before the interruption.
Result of Test

PASS FAIL

EXCEPTION(S)

Device does not have open / close functionality.

64

14.2 Device open

Test ID Test Title
14.2 Action – Device Open
Test Description
Ensure that the Application handles device opening correctly.
Required for:
Applications on devices with open / close functionality.
Not Required for:
Device without open / close functionality.
Testing Note

Testing Steps
2. Use the Application and its features.
3. Close the device.
4. Open the device.

RESULT:
The Application returns to the same state before the interruption.
Result of Test

PASS FAIL

EXCEPTION(S)

Device does not have open / close functionality.

65

15 Stability

15.1 Application stability

Test ID Test Title
15.1 Stability – Application stability
Test Description
The Application must not crash or freeze at any time while running on
the device.
Required for:
All applications.
Testing Note
1. During any time of the testing observe the Application behavior.
2. The report must indicate if the error can be reproduced or not.

Testing Steps
1. Start to test the Application.
2. Observe the Application behavior during the testing.

RESULT:
The Application must not freeze or exit unexpectedly at any time.
Result of Test

PASS FAIL

66

15.2 Application behaviour after forced close

Test ID Test Title
15.2 Stability – Application behaviour after
forcible close by System
Test Description
Application must preserve sufficient state information to cope with
forcible close by the system.
Required for:
All applications.
Testing Note
If it is not possible to remove the device battery, a power cycle should be
forced with the device power key instead.
Testing Steps
1. Start the Application.
2. Exercise the functionality of the application, including any function that
builds or saves information.
3. Press the Home key to return to the Home screen and ensure the
application is switched into a paused state.
4. Remove the battery to instantly kill the application, as the system does
when dealing with a low memory situation.
5. Restart the handset and open the application again.
6. Check the application is in a usable state and any information built or
saved before the close has been retained.

RESULT:
The Application must not lose any information that it implies would be
preserved, nor become difficult to use subsequently, as a result of a forcible
closure by the system.
Result of Test

PASS FAIL

67

16 Data Handling

16.1 Save game state

Test ID Test Title
16.1 Save record – Game state
Test Description
Ensure that the Application can save its game state/high score table
information into persistent memory.
Required for:
1. Application where user may exit part completed game;
2. Application where a player high score value is identified.
Not Required for:
Application which does not have game state / high score elements.
Testing Note

Testing Steps
1. Launch the Application and start a game.
2. Bring up the game menu and exit saving game position.
3. Run Application again and continue game.
4. Play game until a high score is obtained.
5. Bring up game menu and check High score table.
6. Exit Application and restart.
7. Check high score table.

RESULT:
1. Game state should be as was immediately prior to Application exit.
2. The high score table should represent the scores recorded during the
Application test.
Result of Test

PASS FAIL

EXCEPTION(S)

Application does not have game state or high score elements.

68

16.2 Data deletion

Test ID Test Title
16.2 Delete – Data deletion
Test Description
The Application must indicate whether data will be permanently deleted
or offer easy reversal of the deletion.
Required for:
Application which has function to delete data.
Not required for:
Application which does not have function to delete data.
Testing Note
The user should always be required to confirm deletion of data, or have an
option to undo deletion, to reduce risk of accidental loss of information
through user error.
Testing Steps
2. Use the function which deletes something on the Application.
3. Check if there is a reversal (undo) available for the user or that the user is
notified before deletion is permanent.

RESULT:
1. Before the data deletion, the Application notified the user of deletion, or the
Application has an “undo” feature.
2. If “undo” is present it works as expected.
Result of Test

PASS FAIL

EXCEPTION(S)

Application does not have function to delete data.

69

16.3 Modify record

Test ID Test Title
16.3 Modify Record
Test Description
Ensure that the Application can modify its game state/high score table
information into persistent memory.
Required for:
1. Application which may be exited part-way through game play;
2. Application which identifies a user high score value.
Not Required for:
Application which does not have game state / high score elements.
Testing Note
Repeating the save of game state and high score ensures that the values
initially saved can be updated.
Testing Steps
Repeat Save record – Game state

RESULT:
Game state is saved/updated

Result of Test

PASS FAIL

EXCEPTION(S)

Application does not have game state / high score elements.

70

17 Security

17.1 Encryption

Test ID Test Title
17.1 Security – Encryption
Test Description
When connections are used encryption is used for sending / receiving
sensitive data.
Required for:
Application identified as communicating sensitive data.
Not Required for:
Application identified as not communicating sensitive data.
Testing Note
All sensitive information (personal data, credit card & banking information
etc.) must be encrypted during transmission over any network or
communication link.
Testing Steps
Refer to supplied information about the application. If the application transmits
sensitive data and the developer has not stated encryption is used, this test
cannot be passed

RESULT:
It has been declared that the Application uses encryption when
communicating sensitive data.
Result of Test

PASS FAIL

EXCEPTION(S)

Application is stated not to communicate sensitive data.

71

17.2 Passwords

Test ID Test Title
17.2 Security – Passwords
Test Description
Passwords or other sensitive data are not stored in the device and are
not echoed when entered into the Application, sensitive data is always
protected by password.
Required for:
Application which uses passwords or other sensitive data.
Not Required for:
Application which does not use passwords or other sensitive data.
Testing Note
1. With passwords the desired approach is that the Application shows which
character the user selected and then changes that to an asterisk (*).
2. If the user is explicitly asked for permission, a password can be stored to
the device memory.
3. The objective of the test is to minimise the risk of access to sensitive
information should the device be lost, by ensuring that no authentication
data can be re-used by simply re-opening the application
4. Once sensitive data has been entered, it should not be displayed in plain
text anywhere in the application, however it is allowable to have no more
than 25% of a sensitive value displayed in plain text (e.g. 4 of the 16 digits
of a card number) where this assists the user to distinguish between
multiple cards or accounts.
5. For the purpose of this test, personal contact details such as those
recorded in the phonebook should not be regarded as sensitive. Bank /
credit card account numbers, balances & access codes or passwords
should be treated as sensitive and be protected from unrestricted access.

Testing Steps
2. Go to the section where passwords or other sensitive data (such as credit
card details) is input or displayed.
3. Input or read some sensitive data. Observe how the data are displayed on
the screen.
4. Exit the Application.
6. Go to the place where sensitive data was inserted or read.
7. See if the data is still visible, or can be redisplayed without requiring a
password at any point.

RESULT:
1. Entering a password or other sensitive data will not leave it in clear text if
completion of the fields is interrupted but not exited.
2. Passwords, credit card details, or other sensitive data do not remain in
clear text in the fields where they were previously entered, when the
application is re-entered.
3. Sensitive personal data should always need entry of a password before it
can be accessed.

72

Test ID Test Title continued from previous page
17.2 Security – Passwords
Result of Test

PASS FAIL

EXCEPTION(S)

Application does not use passwords or other sensitive data.

DISCLAIMER. THIS UNIFIED TESTING CRITERIA DOCUMENT ("DOCUMENT") IS FOR INFORMATIONAL
PURPOSES ONLY. YOUR USE OF THIS DOCUMENT AND THE INFORMATION PROVIDED HEREIN IS AT
YOUR OWN RISK. THE DOCUMENT IS PROVIDED ON AN "AS IS" AND "WITH ALL FAULTS" BASIS. THE
UNIFIED TESTING INTITIATIVE INCLUDING THE MEMBERS IT IS COMPRISED THEREOF DISCLAIM ALL
EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS, AND WARRANTIES OF ANY KIND, INCLUDING
ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS
FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. THE UNIFIED TESTING INITIATIVE INCLUDING
THE MEMBERS IT IS COMPRISED THEREOF MAKE NO REPRESENTATIONS, WARRANTIES, CONDITIONS OR
GUARANTEES AS TO THE USEFULNESS, QUALITY, SUITABILITY, TRUTH, ACCURACY OR COMPLETENESS
OF THIS DOCUMENT AND MAY CHANGE THIS DOCUMENT AT ANY TIME WITHOUT NOTICE.

73

Utc android v1

More Related Content

What's hot (19)

Viewers also liked (7)

Similar to Utc android v1 (20)

Recently uploaded (20)

Utc android v1