Vector System Image Processor for Water in Hydrocarbons and Particles in Hydrocarbons
0 likes110 views
The Canty InflowTM is an advanced in-line tool designed for monitoring contamination in hydrocarbons by analyzing particle size and count of water and solids. It provides independent readings for better accuracy and can visually verify measurements, operating in various environments to ensure optimal hydrocarbon quality. The system also features real-time analysis, multiple configurations, and data storage capabilities, facilitating quick identification and resolution of contamination issues.
![Document P/N:TA11500-1022
CANTY
www.jmcanty.com
INTERNAL SEAL MATERIAL
B - BUNA N - NEOPRENE
V - VITON® K - KALREZ®
S - SILICONE C - CHEMREZ®
E - EPDM
ENVIRONMENTAL RATING
1 - NEMA 4 WEATHERPROOF
2 - IP 66
3 - EXPLOSION PROOF
4 - FLAME PROOF
ANSI OR DIN PRESSURE RATING / FLANGE PATTERN
ANSI DIN
A - 150 PSI D - 10 BAR
B - 300 PSI E - 16 BAR
C - 600 PSI F - 25 BAR
Consult factory for pressure rating up to 10,000 PSI.
INPUT POWER
A - 120 V AC / 60Hz / 250W
B - 230 V AC / 50Hz / 250W
NON-WETTED METAL MATERIAL(PRESSURE BEARING)
0 - Carbon Steel
1 - 300 Series Stainless Steel
CONNECTION TYPE
B - Swagelok®
C - Flange (ANSI/DIN)
E - NPT (Female)
CONNECTION SIZE
0 - 1/2” (12.7mm) 4 - 4” (100mm)
1 - 1” (25mm) 6 - 6” (150mm)
5 - 1.5” (38mm) 8 - 8” (200mm)
2 - 2” (50mm) 9 - 10” (254mm)
3 - 3” (80mm) A - 12” (305mm)
WETTED METAL MATERIAL
1 - 316L Stainless Steel
2 - Hastelloy® C276 or equal
3 - Hastelloy® C-22® or equal
4 - Carbon Steel
V W 6 C 1 1 1 A A 1 V
Ordering Information
HOW TO ORDER: Select the appropriate symbols and build a part number :
MOUNTING CONNECTIONS
FLANGE CONNECTION SWAGELOK® CONNECTION
Notes:
1. Camera and Light PSUs are not shown but must be located within 100 feet of the unit. The Camera Power Supply enclosure has the same environmental rating as the system.
2. CantyVisionClient™ Software is included but the customer provides the PC which is not included with the system. Reference Document TA10592-1 for computer
requirements.
TYPICAL PACKAGE
Canty LED- Provides optimal
backlighting with variable 0-1/2”
[12.7mm] measurement gap
Process Connection
Ethernet Vision System
for product measurement
Ethernet Network
Connectivity
EXAMPLE:
Buffalo, NY USA Dublin, Ireland Phuket, Thailand
Ph: (716) 625 4227 Ph: + 353 (01) 882 9621 Ph: + 66 (83) 968 9548
SOLIDS IN
HYDROCARBONS
SOLID PARTICLE
SOLID PARTICLE
WATER IN
HYDROCARBONS
WATER DROPLET
Ives Equipment | www.ivesequipment.com | (877) 768-1600](https://image.slidesharecdn.com/canty-inflow-hydrocarbon-analyzer-ives-equipment-171128152933/85/Vector-System-Image-Processor-for-Water-in-Hydrocarbons-and-Particles-in-Hydrocarbons-2-320.jpg)
Vector System Image Processor for Water in Hydrocarbons and Particles in Hydrocarbons
- 1. FEATURES CANTY The CANTY Inflow™ is an excellent in-line tool to determine contamination in hydrocarbons. It does this by monitoring the particle size and count of water and solids. · Refinery · Hydrocarbon Monitoring · Jet Fuel Monitoring · Color & Haze Monitoring · Lab / At-Line / In-Line · Replaces Existing Laser Units · Replace Capacitance Meters · Many, many more! · Variable Size available From 1/2” - 10” · Independent Reading Of Water & Solids · No Analysis Problem With Gas Bubbles · Record Video For Later Analysis · Optional Save Video & Images If Needed Gallons per Minute Flow Rates · Power: 120 VAC / 60 Hz (230 VAC / 50 Hz) Ethernet Camera Resolution INFLOW™ - HYDROCARBONS ANALYSIS The CANTY Inflow™ is a vision-based camera system used with the CANTY Vector System image processor for water in hydrocarbons and particles in hydrocarbons in a lab environment / at-line / in-line process. The presence of these two physical contaminants is a problem for equipment the hydrocarbon is going into. The CantyVision™ Software accurately measures multiple aspects of the hydrocarbons from water / solids / gas independent of each other for accurate data. In comparison to a laser and capacitance, which measures only one dimension and can’t identify the difference of water and solids in the stream. The CantyVision™ software can identify the differences. The customer can also visually verify the readings. Hydrocarbon contamination takes place mainly in production and transportation. CANTY objectively takes the measurement and reports based on a two dimesional image. Solids & water are all measured and continuosly and objectively monitored. By knowing whether there is a water or solids problem this helps the operators identify how to fix the problem. The Inflow™ is an in-line analysis system to make sure production samples are not skipped over! · PPM / PPB Values · Particle Size Distribution Of Water / Solids · 15 ft/s Flow Velocity · Real Time Analysis · Easy To Use For Operators And Lab · Multiple Line Size Available · Eliminate Errors Associated With Capacitance · Eliminate Errors Associated With Laser · Reduce Analysis Wait Time For Operators · Particle Size = .7 Microns And Greater · Visual Verification · Complete Skid Mount Design · Data Can Be Stored With Images Or Video · All Data Is Stored On Excel Or In A Database For Later Use And Easy Storage DIFFERENTIATES BETWEEN WATER AND SOLIDS CANTY www.jmcanty.com Document P/N:TA11500-1022 · CantyVision™ System Can Measure And Control Your Process Parameters · Inflow™ Systems Use A live Video Data · CantyVision™ Can Perform Concentration / Particle Size / Count Functions · Microsoft Windows Based Operating System · Ethernet OPC or 4-20 mA Devices PROCESS TECHNOLOGY APPLICATIONS BENEFITS SPECIFICATIONS ANALYSIS WITH CANTYVISION HYDROCARBON ANALYSIS THE CANTY ADVANTAGE Buffalo, NY USA Dublin, Ireland Phuket, Thailand Ph: (716) 625 4227 Ph: + 353 (01) 882 9621 Ph: + 66 (83) 968 9548 Ives Equipment | www.ivesequipment.com | (877) 768-1600
- 2. Document P/N:TA11500-1022 CANTY www.jmcanty.com INTERNAL SEAL MATERIAL B - BUNA N - NEOPRENE V - VITON® K - KALREZ® S - SILICONE C - CHEMREZ® E - EPDM ENVIRONMENTAL RATING 1 - NEMA 4 WEATHERPROOF 2 - IP 66 3 - EXPLOSION PROOF 4 - FLAME PROOF ANSI OR DIN PRESSURE RATING / FLANGE PATTERN ANSI DIN A - 150 PSI D - 10 BAR B - 300 PSI E - 16 BAR C - 600 PSI F - 25 BAR Consult factory for pressure rating up to 10,000 PSI. INPUT POWER A - 120 V AC / 60Hz / 250W B - 230 V AC / 50Hz / 250W NON-WETTED METAL MATERIAL(PRESSURE BEARING) 0 - Carbon Steel 1 - 300 Series Stainless Steel CONNECTION TYPE B - Swagelok® C - Flange (ANSI/DIN) E - NPT (Female) CONNECTION SIZE 0 - 1/2” (12.7mm) 4 - 4” (100mm) 1 - 1” (25mm) 6 - 6” (150mm) 5 - 1.5” (38mm) 8 - 8” (200mm) 2 - 2” (50mm) 9 - 10” (254mm) 3 - 3” (80mm) A - 12” (305mm) WETTED METAL MATERIAL 1 - 316L Stainless Steel 2 - Hastelloy® C276 or equal 3 - Hastelloy® C-22® or equal 4 - Carbon Steel V W 6 C 1 1 1 A A 1 V Ordering Information HOW TO ORDER: Select the appropriate symbols and build a part number : MOUNTING CONNECTIONS FLANGE CONNECTION SWAGELOK® CONNECTION Notes: 1. Camera and Light PSUs are not shown but must be located within 100 feet of the unit. The Camera Power Supply enclosure has the same environmental rating as the system. 2. CantyVisionClient™ Software is included but the customer provides the PC which is not included with the system. Reference Document TA10592-1 for computer requirements. TYPICAL PACKAGE Canty LED- Provides optimal backlighting with variable 0-1/2” [12.7mm] measurement gap Process Connection Ethernet Vision System for product measurement Ethernet Network Connectivity EXAMPLE: Buffalo, NY USA Dublin, Ireland Phuket, Thailand Ph: (716) 625 4227 Ph: + 353 (01) 882 9621 Ph: + 66 (83) 968 9548 SOLIDS IN HYDROCARBONS SOLID PARTICLE SOLID PARTICLE WATER IN HYDROCARBONS WATER DROPLET Ives Equipment | www.ivesequipment.com | (877) 768-1600