Vpnsetup
Download as PPT, PDF0 likes152 views
The document provides steps for installing and configuring a VPN client on Windows 95, 98, NT, or 2000 systems. The steps include running the setup program from the VPN CD, following the installation wizard, entering registration information, creating a new tunnel, specifying the remote gateway IP address and password, and connecting to establish the VPN connection. Once configured, the system is ready to use the VPN to connect to the specified remote network.
Vpnsetup
- 1. Steps for installing and configuring VPN 1. VPN client is comparable with WIN95, WIN98 and WINDOWS NT. 2. Insert the VPN CD in the drive and go to software directory. If you have OS WIN95/WIN98 run setup from:- D:vpnclient/software/client95/setup If you have Windows 2000 :- D:vpnclient/software/clientnt/setup. 3. Follow the following setups
- 2. 4. Next
- 3. 5. Yes
- 4. 6. Type the Name and company name.
- 5. 7. Next
- 6. 8. Next
- 7. 9. Next
- 8. 10. Next
- 9. 11. Next
- 11. 12. YES
- 12. 13. YES
- 13. 14. Finish
- 15. 1. Type the users (Tunnel Name) and password
- 17. 2. OK
- 18. 3. Retype the password
- 19. 4. Go to Tunnel
- 20. 5. Click on New
- 21. 6. Type your Tunnel name 7. Go to Add Select Dial-up Adapter
- 22. 8. Type IP Address, 203.199.37.165 if you are using Dialup, OR if you are using Local Lan type 90.45.2.3 ,than
- 23. 9. OK
- 24. 10. Right click on connecting and go to Advance properties.
- 25. 11. Click on Security
- 26. 12. Type your password in place of ******
- 27. Now it is connected to Centrepoint. You got the IP address in 90.45.2.X Now it is ready for use.