wifi spy plug camera usder guide
Download as DOC, PDF0 likes1,158 views
This document provides instructions for operating a WiFi network camera. The camera can be monitored after following 4 steps: 1) Download the mobile app, 2) Connect phone to camera WiFi hotspot, 3) Press the reset button on the camera for 30 seconds, 4) Log into the camera on the mobile app. Key parameters of the camera include support for VGA video resolution, 10fps frame rate, CMOS sensor, 2.4GHz WiFi, and operation via mobile or computer app.
wifi spy plug camera usder guide
- 11. wifi 网络摄像机操作 插上电源/即可监看 首次使用, 只需按下面 4 点操作即可. 1. 手机或电脑上网 www.scc21.net 下载相应<平果/安卓>客户端. 2. 设备插上电源等待 20 秒后，手机 wifi 连接其热点 Aimer88<密码 12345678>后, 打开手机 客户端---点本地--点摄像头名称右旁的兰色前头 “>”---点无线网络设置---正确输入本地路由 器名称和密码---确定. 返回客户端主页. 3. 将设备上的’确定/复位’ 孔按下去， 等待 30 秒后. 4. 手机输入设备上的摄像头名称和密码, 登录;即可远程监控. 温馨提示: 对不同的网络环境需将设备上的”确定/复位” 孔按上来, 再进行上面 2-4 的操作. 确定/复位孔 相关参数 名称 WIFI/IP 网络摄像机 视频格式 AVI 视频编码 M- JPEG 视频分辩率 640*480 VGA 网络传输分辩率 320*240 QVGA 视频帧率 10fps±1fps 传感器 1/3" 彩色 CMOS 天线 2.4G 802.11n WIFI 内置天线 存储 支持 TF 卡，手机容户端存储 播放软件 操作系统自带或主流影音播放软件 影像比例 4：3 支持系统 Windows ISO Android 电源电压 交流 220 伏
- 12. Wifi network camera operation Plug in the power / monitor For the first time, simply press the following 4 operations. 1. go to Internet www.scc21.net with your phone or computer to download the appropriate <apple / Andrews> client. 2. Wait 20 seconds after the device is plugged in, the phone wifi connection with it’s hot point Aimer88 <password 12345678>, open the local phone client --- point to point the camera right next to the name of the head of the blue ">" --- point to wireless network settings correctly enter the local router name and password --- OK. returned to the client home page. 3. The 'OK / Reset' hole press down, wait for 30 seconds after the device. 4. Enter the phone camera name and password on the device, log in; you can RMON. Tips: for different network environments need to "OK / Reset" hole on the device by up, then the operation of the above 2-4. OK / reset hole Parameters Name WIFI / IP network camera AVI video format M- JPEG video encoding Video resolution 640 * 480 VGA Network transmission resolution 320 * 240 QVGA Video frame rate 10fps ± 1fps Sensor 1/3 "Color CMOS Antenna 2.4G 802.11n WIFI built-in antenna Storage support TF card, mobile phone client storage capacity Playback software that comes with the operating system or mainstream audio and video playback software Image ratio 4: 3
- 13. Support system Windows ISO Android Power supply voltage AC 220 V