La84trackfield

2
The LA84 Foundation is the organization created to manage Southern California’s share of the
surplus from the 1984 Olympic Games. Located in the historic Britt House since 1985, the LA84
Foundation has committed more than $160 million to create, support and expand existing youth
sports programs, and develop the Paul Ziffren Sports Resource Center. The Sports Resource Center
is a state-of-the-art learning and cultural center for sports which contains sports books, films, videos,
photographs and memorabilia. To date, more than two million boys and girls and more than 1,000
youth sports organizations throughout Southern California have benefited from our endowment.
The goal of the LA84 Foundation is to be an innovator in youth sports and coaching, and to increase
opportunities for achieving athletic excellence at every level. The Foundation grants financial assis-
tance to organizations providing youth sports opportunities, initiates and operates its own youth
sports programs including Run For Fun, Summer Swim, and offers free coaching education work-
shops through the LA84 Foundation Coaching Program. For additional information regarding the
LA84 Foundation please visit our web site at www.LA84Foundation.org.
Peter V. Ueberroth, Chairman
Anita L. DeFrantz, President
Board of Directors:
John Bryson
Yvonne Burke
Jae Min Chang
Anita L. DeFrantz
James Easton
Janet Evans
Priscilla Florence
Bob Graziano
Rafer Johnson
Maureen Kindel
Tom Larkin
Charles D. Miller
Peter O’Malley
Joan Payden
Amy Quinn
Frank Sanchez
Peter Ueberroth
Gilbert Vasquez
David L. Wolper, Chairman Emeritus
John Ziffren

3
Design
Mary Jo Reutter
Cover Design
James Robie Design Associates
ISBN 0-944831-32-X
CIP 94-80269
©1995-2012 LA84 Foundation. All rights reserved.
This manual may not, in whole or in part, be copied, photocopied, reproduced, translated,
or converted to any electronic or machine-readable form without prior written consent of
the LA84 Foundation.
Printed in the USA
LA84 Foundation
2141 West Adams Boulevard
Los Angeles, CA 90018
(323) 730-4600
LA84 FOUNDATION TRACK AND FIELD COACHING MANUAL
Edited By
Edward Derse
Jacqueline Hansen
Tim O’Rourke
Skip Stolley
Contributing Writers
John Amneus
Don Babbit
Bob Baker
Michele Buchicchio
Ellen Coleman, R.D.
Edward Derse
Brian FitzGerald
Ann C. Grandjean, Ed.D.
Hal Harkness
Dave Johnston
Rick McQuire, Ph.D.
Kevin O’Connell
Ken Reeves
John Tansley
Skip Stolley
Art Venegas
Danny Williams
Brian Yokayama

4
Table of Contents
Chapter 1: A Philosophy for Coaching High School Athletes. . . . . . . . . . . 9
The High School Coach, Someone Special. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
High School Sports as an Extended Classroom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Developing a Coaching Philosophy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Chapter 2: Organizing a Track and Field Program . . . . . . . . . . . . . . . . . . . . . . . 27
Responsibilities of a Head Track Coach. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
The High School Coach’s Legal Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Sexual Abuse in Youth Sports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Organizing a Track and Field Coaching Staff. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Preparing for the Season. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Sample Team Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Chapter 3: Principles and Methods of Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Teaching Track and Field Skills. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Universal Principles of Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Planned Performance Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Integrating Skill and Fitness Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Warm-Up, Warm-Down and Stretching. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Chapter 4: Strength and Power Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Strength Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Strength Training Principles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Safety in the Weight Room. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
The Strength and Weight Training Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
The Lifts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Chapter 5: Plyometric Training for Speed-Strength. . . . . . . . . . . . . . . . . . . . . . 105
A Philosophy of Plyometric Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
The Physiology of Plyometric Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Principles of Plyometric Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Constructing a Plyometric Training Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Incorporating Plyometric Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

5
T a b l e o f C o n t e n t s
Track and Field Coaching Program
Chapter 6: Injuries: Prevention and Treatment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
The Coach’s Responsibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
The Most Common Injuries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Returning an Injured Athlete to Competition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Preparing for Injuries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Other Health Issues. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Chapter 7: Performance-Enhancing Drugs and Supplements. . . . . . . . 151
Anabolic-Androgenic Steroids. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Other Performance-Enhancing Substances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Chapter 8: Eating for Health and Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
The Athlete’s Diet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Pre-Competition Meals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Fueling During Competition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Achieving Ideal Competitive Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Eating Disorders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Chapter 9: Organizing a Home Track Meet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
How to Prepare for a Home Dual Meet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
How to Recruit and Train Adult Officials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Chapter 10: Training Sprinters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
A Philosophy for Coaching the Sprint Events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
The Speed Dynamics® Approach to Sprint Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Testing and Evaluation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Coaching the Mechanics of Sprinting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
Coaching the Maximum Velocity Phase. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
Acceleration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
The Start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
The Finish. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239

6
Coaching the Relays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
Applying Strategy to the Sprint Races. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
A Training Periodization Plan for the Traditional High School Track Season. . . . . . . . . . . . . . . . . . 254
Chapter 11: Training Hurdlers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260
A Philosophy for Coaching the Hurdles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
Teaching the Technique of Hurdling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262
Stages of Hurdling: Girls’ 100m and Boys’ 110m. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
Methods of Training for the Hurdle Events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
Training Periodization Plan for the High School Season. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
Chapter 12: Training Distance Runners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
A Philosophy for Coaching the Distance Events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
Periodization for Distance Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280
Universal Principles of Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
Basics to Teach for Racing Success. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
Tactics to Teach. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
Types of Racers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
Running Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293
Teaching Distance Running Mechanics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
The Three Distance Races. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
Other Keys to Being an Effective Distance Coach. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
Liability and Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307
Chapter 13: Training Long Jumpers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313
A Philosophy for Coaching Long Jumpers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
Coaching Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
Drills. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
Training for the Long Jump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
Considerations in Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
Types of Training for the Long Jump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322
Jump Testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
Training for the High School Season. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
Chapter 14: Training Triple Jumpers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
A Philosophy for Coaching the Triple Jump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331
The Run-Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331

7
Phase I The Hop. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331
Phase II The Step. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
Phase III The Jump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334
Ratios. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334
Teaching the Triple Jump to Beginners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
Considerations in Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
Developing Jumping Rhythm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
Type of Training for the Triple Jump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
Jump Testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341
Training for the High School Season. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342
Chapter 15: Training High Jumpers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346
Philosophy for Coaching the High Jump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347
Event Technique and Skills to Be Taught. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347
The Mechanics of the High Jump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 348
The Run-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 348
The Transition and Takeoff. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
Bar Clearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
Principles of Training for the High Jump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
Teaching the Flop Method of High Jumping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353
Types of Training for the High Jump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356
Technique Drills. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359
A Training Periodization Plan for the Season. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364
Tactics and Strategy for High Jump Competition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365
Flop Checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 367
Chapter 16: Training Pole Vaulters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371
A Philosophy for Coaching the Pole Vault. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372
Ensuring Safe Participation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372
Principles of Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373
Technique, Start-to-Finish. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375
Introducing the Pole Vault to Beginners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380
Coaching the Fundamentals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382
Methods of Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387
Tactics and Strategy for Competition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393
A Training Periodization Plan for the Season. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395

8
Chapter 17: Training Shot Putters and Discus Throwers. . . . . . . . . . . . . . . 399
A Philosophy for Coaching Throws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
Safety Considerations in Events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
Principles of Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401
The Mechanics of Throws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403
Understanding the Techniques. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 404
Introducing the Throws to Beginners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 412
The Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 415
Methods of Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 416
A Periodization Plan for the Season. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420
Appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425
The Rules of Competition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426
Officials’ Instruction Sheets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 445

9
ABILITY
TO ADAPT
YOUR
COACHING TO
THE INDIVIDUAL
NEEDS OF YOUR
ATHLETES.
ABILITY TO ADAPT YOUR
COACHING TO YOUR OWN
UNIQUE SITUATION.
DEVELOPMENT OF YOUR OWN
“ TRAINING PHILOSOPHY.”
ABILITY TO ORGANIZE, COMMUNICATE,
AND MOTIVATE YOUNG ATHLETES.
COACHING INSIGHTS GAINED FROM WORKING
WITH ATHLETES.
COACHING KNOWLEDGE GAINED FROM CLINICS
AND PERSONAL STUDY OF TECHNIQUE AND THE SPORT
SCIENCES: EXERCISE PHYSIOLOGY, BIOMECHANICS,
NUTRITION AND SPORT PSYCHOLOGY.
COACHING KNOWLEDGE GAINED AS AN ASSISTANT OR ATHLETE IN
THE CHARGE OF A MENTOR COACH.
POSITIVE PERSONAL EXPERIENCES AS AN ATHLETE. A LOVE FOR THE SPORT
AND THE DESIRE TO ASSUME THE MANY ROLES OF A COACH TO HELP
NEW GENERATIONS OF YOUNG ATHLETES IMPROVE.
The Evolution of a Master Coach
1
C h a p t e r
A Philosophy for Coaching High School Athletes
High school coaching may be the most special and important profession
anyone can choose.This is not because sports are important, but, rather,
because the young men and women who participate in high school
sports are so valuable. Coaches have an opportunity to foster both their
athletes' emotional and physical development. The path to coaching
success begins with defining a philosophy to guide your efforts.

10
C h a p t e r 1
The High School Coach, Someone Special
ATHLETES MEET SPORTS THROUGH THE COACH
It is the coach who frames the sport experience for the athlete. A study of 10,000
high school athletes concluded the quality of coaching has the greatest influence on
whether or not participation in high school sports becomes a positive experience for
the young athlete.
The collage of track and field events offers opportunities for athletic success to a
wider variety of personalities, body types and natural athletic talent than any other
sport. Combined with its dual offering of individual and team competition, no other
sport can provide so much for so many. There are opportunities to develop physically,
emotionally and socially. There are opportunities to discover hidden talents, learn
about oneself and develop a new sense of competence and self-worth. There are
opportunities to be part of a team while competing as an individual. There are lessons
about life and reality. There is the motivation to pursue goals and objectives that most
teenagers dismiss as being impossible. All these possibilities are woven into the unique
fabric of sport. The responsibility of making them an intimate part of every young
athlete’s Track and field experience rests squarely on the shoulders of the coach.
The Role of the Coach
What exactly is the high school coach’s role: recruiter, teacher, trainer, strategist,
personnel manager, administrator, promoter, communications expert, diplomat,
spokesperson, psychologist, impartial judge, disciplinarian, caring friend, counselor,
parent substitute? To be a high school coach is to assume all of these diverse roles. For
the coach, the greatest reward should not be the outcome of winning, but rather the
process of training and competition that positively affects the personal development of
young athletes. Great coaches use sport as a vehicle to enrich the lives and the futures
of their athletes.
It DOES Matter Whether You Win or Lose!
While society often perceives winning as the most prized outcome of sport, a single
focus on winning by the coach can subordinate every other worthy outcome of an athlete’s
participation in sports. There is nothing wrong with wanting to win; however, there is
a difference between being focused and being obsessed with winning. It is important
for a coach to evaluate him or herself often during the year to determine if winning
has become the priority over doing what is best for the young people in the program.

11
C h a p t e r 1
At best, only 50 percent of the participants can be winners in any sport competition.
In a sport such as track and field, only one team among several and only one
individual among many achieve victory.
So, does everyone else then become losers? Is there no opportunity for achievement,
fulfillment and fun without winning? Is winning really the ultimate goal of sport or is
there a more important objective and a more attainable goal?
Winning vs. Success
The opportunity for success is available to everyone if it is defined as performing to
one’s capability rather than focusing solely on the score of a given competition.
This is especially true in the sport of track and field where individual improvement
can be quantifiably measured by a watch or measuring tape. Even though a team may
lose on the scoreboard, the shot putter who places fourth in his event but improves his
lifetime best mark by a foot or the hurdler who does not place in the race but “three
steps” all flights for the first time certainly has reason to feel successful.
Teaching athletes to focus on success and discussing with them what success really is,
rather than allowing winning to be the only measure, nurtures the factors that ulti-
mately lead to winning.
Success = Ability + Preparation + Effort + Will
Ability. Everyone has ability, but it isn’t distributed equally or predictably. This
applies to coaches as well as athletes.
Often ability is a gift of birth, but that doesn’t guarantee success. The challenge isn’t
to have ability but to develop and use the ability that is given.
Preparation. We gain greater use of our abilities by investing in preparation.
Only through the persistent and consistent process of preparation can raw talent
be transformed into greater capability. In track and field, this preparation is called
training. Through proper training, athletes become faster, stronger, more skilled,
knowledgeable, confident and mentally tough; however, although developing greater
capability is important, it is still no guarantee of success.
Effort. Developed ability realizes its value when expressed through the challenge

12
C h a p t e r 1
of competition. That expression is accomplished when physical and mental effort
summon every ounce of one’s capability. Still, athletes often find themselves nearing
the finish of their race exhausted, having given all they think possible, but needing to
find even more. In sport this is called...crunch time!
Will. Crunch time is real, both in sport and life. It is that moment when a person
thinks he or she has given all there is to give, only to find out even more is required.
Many athletic contests are won or lost at this moment. Some athletes are able to draw
on an inner strength to summon greater effort than they know themselves to have.
This is the use of one’s will, the power to go back to one’s personal reservoir again and
again as needed.
When athletes and teams train hard to develop their ability, give their best effort in competition,
and show the will to push themselves beyond self-imposed limits, they are successful.
Too often, coaches and athletes miss experiencing the pride and satisfaction of success
because they are too focused on winning. More often, coaches and athletes fail to win
because they first fail to become successes.
Building Success
Unlike winning, success can be experienced by every athlete every day. It doesn’t,
however, come easily or immediately. Success requires athletes be coached to develop
some specific, personal attitudes. Robert Goodwin, track and field coach at St.
Lawrence University, has identified six such attitueds.
1. The desire to strive for excellence.
2. The realization that nothing of value can be achieved without
hard work and dedication.
3. The desire to display self-confidence.
4. The desire to show one’s ability in competition.
5. The desire to cooperate as part of a team.
6. The desire to have fun.
The Desire to Have Fun
The desire to have fun deserves special attention. Sports should be fun for both

13
C h a p t e r 1
athletes and coaches. The opportunity to have fun is consistently identified by students as
the number one incentive to participate in high school sports.
Athletes must understand the "fun" referred to here is not the “fool around” fun we
see in our locker rooms, on the bus, or at team parties. It is the pride, satisfaction and
fulfillment a youngster experiences from improving his or her strength, speed and skill
after hours of training and practice. It is the thrill and exhilaration of setting a new
personal best in competition. This is the fun that all athletes and coaches seek. It is
the fun of feeling good about oneself – the feeling that stays with athletes long after
they have left the track.
When athletes experience this kind of fun, they become consumed with the desire to
feel more of it more often...preferably as soon as possible. Developing this desire to
have fun may be the most important attitude coaches can teach. When athletes are
filled with the desire to have fun, they are likely to:
• Strive with all their heart for excellence.
• Dedicate themselves to consistent hard training.
• Show the self-confidence to make the tough decisions and sacrifices it takes to train
and compete at their best.
• Be anxious to show their ability in competition, free of fear or self-doubt.
• Gain personal strength from respecting, helping and caring about their teammates.
So, What About Winning?
Where, then, should winning fit into a coaching philosophy? As noted earlier, nearly
every coach would prefer to win every contest. Realistically, however, it is important
for coaches to admit that it does not matter much whether or not our athletes win all
those races. What does matter is that coaches win the battle to enhance the lives of
their athletes through the experience of participating in track and field. For coaches,
this is the most important win of all. This is the true measure of coaching success.
SHaping THE Environment
Most people believe sport teaches participants high ideals and admirable personal
qualities such as pride, courage, confidence and respect. Unfortunately, this is not
always true. None of these ideals and attributes are inherent in sport. It is the coach

14
C h a p t e r 1
who frames the experience of participating in sports within the environment he or she
creates for the program. For every athlete who has experienced pride through sport,
others have experienced relentless criticism and ridicule from their coaches. For every
athlete who has gained courage from competition, others have been gripped by the
fear of intense scrutiny and high expectations by their coaches. All too often, athletes
develop attitudes of disrespect, hate and vengeance for their opponents, officials,
teammates and coaches.
Sport is fertile ground for learning. Coaches, both good and bad, are effective
teachers. Lessons learned are learned well. Consciously or unconsciously, the coach
designs and controls his or her sport environment. Every coach is encouraged to
invest significant time and effort into engineering an environment that nurtures
pride, confidence, courage, respect, responsibility, trust, caring, leadership and other
attributes the coach believes to be important. These must be reflected and constantly
reinforced in the attitude, words, actions and behavior of the coach.
a GREAT COACH MUST BE A GREAT COMMUNICATOR
Without question, the key to being a successful coach is the ability to communicate
effectively. Communication is a two-way process between the sender and receiver. It
takes on many forms, some overt and others subtle. Coaches communicate with their
athletes by what they say, how they say it, what they write, what they do and how they
behave. To communicate effectively, coaches must also receive communication from
their athletes. In a word, coaches must listen.
Guidelines to Improve Communication Skills
• Understand the primary burden of responsibility for any communication
belongs to the sender, not the receiver.
If it is important enough for a coach to say or write something to an athlete, it is
important enough to be repeated, reinforced and reviewed to be sure the message
is understood. Communication must be an ongoing process, especially with high
school athletes.
• Coaches must communicate with those under them with the same degree of
respect as with those above them.
Some coaches are unaware they may be communicating with younger athletes
or athletes they perceive to be of lesser quality in a condescending or demeaning

15
C h a p t e r 1
fashion. A coach should always ask himself or herself if the choice of words, tone
and style of delivery reflects the attitude and respect that coach would like to
receive in communication from an athletic director or principal.
• Communicate with athletes regularly, consistently and thoroughly.
Make communication easier by having at least one team meeting a week so athletes
come to anticipate and expect certain messages. Avoid just talking at the athletes.
Ask for their questions and input.
• Instruct Constructively.
Too often, athletes are only told what they are doing wrong. It is more important,
and far more effective, to tell them how to do things well by use of the following:
• Reinforce the positive.
• Praise what athletes are doing well – this prepares them to be receptive to the
next instruction.
• Explain the cause of the mistake and how to correct it. Be specific and keep it
short. Athletes can only process a limited amount of information at one time. Be
patient and careful not to show any frustration.
• Use the "Sandwich" approach. "Sandwich" corrective instruction between two
positive comments to take the sting out of continued corrections.
Understanding Motivation
True motivation must come from inside the individual to be effective and long term.
Motivation cannot be given to someone; however, it can be nurtured and tapped. The
word motivation is derived from the word motive, which is the desire to fulfill a need.
The primary need we all have is the need to feel worthy. Our sense of self-worth is
enhanced most by feelings of competence, accomplishment and acceptance. Simply
put, we feel better about ourselves when we feel we are doing something well. We will
work hard to improve in areas where we believe we have the potential for success. The
more effort we put into the process of improving, the more our feelings of increased
competence enhance our feeling of self-worth. Accomplishments and recognition
along the way reinforce our worthiness. We also measure our self-worth by the
acceptance we get from others, especially the sense of belonging to a group of peers.

16
C h a p t e r 1
The need to feel worthy is the single most powerful element of motivation. It should
be easy to see why sports are a perfect vehicle for boosting an individual’s sense of
self-esteem. However, since only a few can be champions, there is a danger of athletes
equating self-worth with the ability to win in competition. The message is, while the
coach cannot make every athlete feel gifted, he or she can make all team members feel
more competent.
What a coach can guarantee is that every athlete feels important and accepted. No
athlete should have to earn a coach’s acceptance. They should all be unconditionally
accepted, and they should know it is OK to make a mistake. Once athletes of any
ability level feel the security of having a coach’s time, energy, interest, belief and trust,
it is literally amazing the great things they will dare to do.
Advice to Help A COACH SURvive and Prosper in Coaching
Dr. Rick McQuire, head track and field coach, at the University of Missouri offers the
following suggestions.
• Family comes first. Coaching is so time intensive the only way a coach can be
assured of having time with his or her own family is to make time. Before a team’s
meet or training schedule is completed, the family schedule should be done first.
• Expect success. Visualize what you want to accomplish. Winners know what will
happen...losers fear what might happen.
• Take the lead. Showcase the track and field program in your school and commu-
nity. Fight for equitable funding. Take a cue from football and basketball and give
track and field a chance to be a spectator sport by presenting your home meets as
entertainment.
• Project yourself. Put your personal stamp on each of your athletes, assistant coaches
and on every phase of your program.
• Surround yourself with good people. No one person can successfully coach a
large group of athletes. To succeed in track and field, a head coach must recruit
and train assistant coaches who will adopt the head coach’s philosophy, share
the commitment, and join the quest for success. An assistant coach, no matter
how knowledgeable in a specific track or field event area, with a bad attitude can
sabotage an entire program.
• Know who your friends are. Anyone in a leadership role is subject to the positive

17
C h a p t e r 1
or negative influence of others. Identify those who can positively influence your
coaching career and seek their advice and council.
• Be true to your values. It can be easy to compromise in the quest to win. Say what
you believe. Do what you say. Nothing is harder to earn and easier to lose than a
good reputation.
High School Sports as an Extended Classroom
Schools have interscholastic sports programs because they provide students with
unique learning experiences that are not obtainable in other segments of the school
curriculum. Through participation in interscholastic sports, athletes improve strength,
speed, endurance and acquire the complex skills and poise needed to perform at their
best in athletic competition.
Few educators have the opportunity to affect the lives of their students more than a
coach. The best coaches use their practices and competitions as extended classrooms
and strive to inspire athletes to reach for their best both athletically and academically.
High school students are young adults who look to their coaches for leadership,
knowledge, instruction and direction. Many lessons can be taught and learned
through participation in competitive interscholastic sports such as how to set goals,
how to compete, how to take risks, how to deal with success and failure and how
to maintain emotional self-control. Important values and attitudes such as sacrifice,
dedication, accountability and self-confidence can be learned along with such virtues
as good sportsmanship, teamwork, camaraderie, respect for opponents, mental
toughness and persistence in the face of adversity. Those experiences and character
traits will lead young athletes toward successful, fulfilling lives long after their high
school athletic careers are over.
The benefits that can be derived from participating in sports, however, do not result
from participation alone. Research indicates it is the quality of adult leadership that
determines whether youngsters have a good or bad experience in competitive sports.
An effective high school coach will be an inspirational leader, a knowledgeable teacher
and an appropriate role model. More than just a teacher of skills and strategies, the high
school coach is a significant adult force in the life of a student-athlete. Coaches can have
a great impact on the psychological growth and personal development of athletes.

18
C h a p t e r 1
Developing a Coaching Philosophy
Determining Coaching Objectives
The two most important considerations in developing a personal coaching philosophy
are determining coaching objectives and coaching style. Coaching objectives could
include improving the program's win/loss record, winning a league title, placing
among the top five teams in the section or state championships, showing significant
individual and team improvement, making the program fun for all the athletes, or
teaching the athletes to compete well.
High school coaches often believe their first responsibility is to produce winning
teams; however, winning should not be the single measure of success for the coach
or the athletes. An overemphasis on winning can produce such negative responses in
young athletes as anxiety, fear of failure, reduced self-esteem and a loss of motivation.
Coaching success should be measured in a variety of ways other than a state ranking,
win/loss record, or a high place in the league meet. The number of athletes attracted
to the program, the athletes’ enthusiasm for track and field, the improvement the
team shows through the course of the season and the amount of parental/community/
school interest and support generated for the program are equally important measures
of success.
Winning the majority of the meets during the season does not necessarily make any
coach a good leader or positive role model for young athletes. A coach's actions speak
louder than words, especially during competition. Coaches must teach respect for the
rules, the opponents and the judgment and integrity of officials by example through
their behavior.
Developing An Effective Coaching Style
Coaching style reflects how a person chooses to lead and interact with student-
athletes. It affects how a coach wants to motivate and discipline, and what role, if any,
athletes are permitted to have in making decisions that affect them.
Each person must choose the coaching style that best fits that person’s personality,
but every coaching style is a somewhat different combination of three approaches:
authoritarian, cooperative and passive coaching styles.

19
C h a p t e r 1
Everyone new to coaching should take some time to consider what coaching style
works best for that person. Experienced coaches should also periodically re-examine
their coaching styles to ensure they are still following the path onto which they
originally embarked.
Here are some suggestions that can help determine a sound coaching philosophy:
• Remember the athletes should be the center of attention. Sports were not created to
glorify coaches.
• The simple objective of coaching is to help athletes shorten the trial-and-error
process of learning and ease the trial-and-terror experiences of competing.
• When coaching, focus on the skills needed, a method to teach and demonstrate
them, and drills to practice and master them.
• Integrity, credibility and technical knowledge are the most important qualities of a
good coach — in that order.
• Every athlete deserves to be addressed by first name and treated with dignity.
• A coaching style must not isolate a coach from the athletes. There must be a forum
for open communication or the coach will never be in touch with the athletes.
Coaches need to be willing to listen to all the athletes, hear criticism and respond
by acting rather than reacting.
• Coaches cannot talk about winning without talking about losing. Is placing second
or third, or not placing but recording a personal best, considered a failure? How do
the athletes behave when they finish races they lose? How does the team behave after
a tough loss? How are athletes expected to bounce back after performing poorly?
• Regardless of the style, coaches need to command their athletes’ attention and
respect. Coaches must continually and openly communicate, motivate, praise and
discipline effectively.
TLC: Teach•Learn•Compete
Every decision a high school coach makes should be in the best interest of an athlete's
physical, psychological and social development. The philosophy advocated by the
LA84 Foundation is TLC: teaching, learning and competing.
Teaching represents what a coach provides student-athletes by way of instruction.

20
C h a p t e r 1
The lessons a coach must teach include technical skills, positive attitudes about
competition, the process of training and effective tactics and strategies. A coach must
also teach athletes emotional self-discipline, responsibility, self-esteem and how to
maintain poise by focusing on the things they can control. No less important are
social values such as appropriate behavior, fair play, good sportsmanship and the
importance of working together to accomplish team goals and objectives.
Learning is the athletes’ acceptance of what is taught. Learning is greatly influenced
by the atmosphere a coach creates in helping athletes reach for their best.
Effective learning requires communication, motivation, feedback, cooperation and
purposeful training. A positive approach to practice and training that emphasizes
skill development, fitness, teamwork and fun will help to ensure athletes’ learning
experiences are positive.
Competition is the essence of sport. Competitive skills are essential to prosper in
a society where we compete for grades, spouses, jobs and promotions to achieve
success, happiness and security. Track and field is a sporting arena in which athletes
demonstrate both their physical and competitive skills. Coaches should portray the
adventure of athletic competition as an opportunity for success rather than failure.
Coaches must help athletes learn as much as possible from their competitive
experiences, analyze what they do well and what they don’t do well, and resume
training with a new agenda and a renewed determination to improve. Coaches
should emphasize that success in sports should be measured by each athlete’s personal
performance goals. Just because every track and field event has only one winner
doesn’t mean everyone else in that event is a loser. Competition should serve as a
reference point for athletes to measure progress.
Sometimes the pressures of competition can result in athletes setting goals that are
unattainable. Goals that are too high guarantee failure even when the athlete performs
well. Coaches should help athletes set realistic goals.
Motivating and communicating with young athletes
Sport psychologists have learned that two of the most important needs of young
athletes are the need to have fun and the need to feel worthy. Certainly, it is easy to
see when athletes have fun. They appear to be challenged, excited, stimulated and
focused. They express feelings of enjoyment, satisfaction and enthusiasm.

21
C h a p t e r 1
Athletes also have a need to feel competent, worthy and positive about themselves.
Sports can be threatening to young athletes when they equate achievement with self-
worth. As youngsters, we learn quickly that others judge our worth largely by our
ability to achieve. To win is to be a success and to lose is to be a failure. This attitude
causes tremendous anxiety in young athletes.
Social evaluation and expectations of others are also major causes of anxiety. Athletes
become anxious when they are uncertain about whether or not they can meet
the expectations of their coaches, parents, peers, or even themselves. The more
uncertainty athletes have, and the more important they perceive the outcome to be,
the greater their feelings of anxiety.
The very nature of sports involves an extensive evaluation of the skills of the
participants. Any situation involving social evaluation of abilities that a youngster
considers important can be threatening if he or she anticipates failing or receiving
negative evaluations. Most youngsters place great value on athletic competence and
are particularly sensitive to appraisal of their abilities by others. Mistakes and errors
which are a natural part of the learning process can be misinterpreted as failure or
incompetence. These competitive pressures can result in youngsters setting unrealistic
standards of near-perfect execution, which virtually assures they will fail.
A coach must help athletes meet their need to have fun by structuring their sport
experience so it challenges and excites without being threatening. Motivated athletes
have a strong desire to master skills and demonstrate their competence. Similarly,
a coach can help athletes meet their need to feel worthy by creating situations
where everyone can experience some degree of success. The continual process of
achieving incremental goals that are challenging, yet attainable, provides motivation.
When athletes experience a taste of success, it reinforces their feelings of mastery,
competence, pride and self-worth. This in turn stimulates their desire to pursue new
levels of personal achievement.
Helping Athletes Reach for their Best
The ability to teach, communicate and motivate athletes is the art of coaching.
Coaches should teach their athletes to focus on things they can control: their own
performance and readiness to compete. When athletes worry about their opponents
instead of focusing on things they can control, they limit their ability to compete
well. Athletes who tend to worry about performance must be taught to focus on what

22
C h a p t e r 1
they want to do (skill or strategy execution), instead of how they are going to perform
against their opponent, the watch or the tape measure. Athletes should also recognize
that winning is sometimes sabotaged by external factors beyond their control, such as
an oncoming cold, bad weather, or outright bad luck. Over time these things even out,
and they will be the beneficiaries of such occurrences as often as they are the victims.
Athletes should know it is all right to make mistakes. Many young athletes fear
making mistakes because they have been ridiculed or punished for making mistakes in
the past. Coaches must create a supportive atmosphere in which athletes view making
and correcting mistakes as a natural part of the learning process. Some athletes
become so frustrated and angry at themselves when they make a mistake during
competition that they lose their composure and perform far below their abilities.
Coaches should teach athletes that one of the things that separates champions from
average athletes is the ability to let go of a mistake quickly and refocus on what needs
to be done next.
Communicating is the most important thing a coach does. This fact cannot be
overstated. Effective communication involves the explicit expression of instructions,
expectations, goals, ideas and feelings. Doing so enhances mutual understanding and
is the first step in meeting the athlete’s and coach’s needs. Communication is a two-
way street: both coach and athlete must listen and speak to make it work.
A coach must be credible in the eyes of the athletes in order to communicate with
them. Credibility is the perception of the trustworthiness of what is said and done. To
be credible in the eyes of an athlete, a coach must be knowledgeable about track and
field, enthusiastic about coaching well, and consistent and positive.
A positive coaching attitude projects a desire to understand athletes, accept them
for who they are, and treat them with respect and affection. It requires refined
listening, clear speaking and the ability to give feedback and constructive criticism
in a nonpersonal and instructive manner. A positive approach is characterized by the
liberal use of praise, encouragement and positive reinforcement. Constant criticism,
sarcasm, or yelling at athletes will increase their anxiety over making mistakes,
decrease their sense of self-worth, and discourage them from continued participation.
Another important component of a positive approach is empathy. It is not the same
as sympathy. Empathy is being aware of the feelings and emotions of the athletes.

23
C h a p t e r 1
Coaches who are empathetic listen to their athletes and try to understand what is
going on in their lives outside of athletics.
Praise must be sincere. When coaches are not sincere, they risk losing the respect of
their athletes. It means little for athletes to hear “Good job” when in fact they know
they have not done a good job. If the athletes or team have not performed well,
the coach should be honest and acknowledge the fact they did not perform to their
potential. However, athletes should also be complimented for things they have done
well. Coaches should praise deserving efforts, not just final outcomes.
Attitude is the key to success. Athletes should know that champions expect to do well.
Champions believe they will succeed and they recognize the important role that hard
work and sacrifice plays in the quest for athletic excellence. Champions focus on goals
and how to achieve them. They don’t surrender their goals easily. They identify their
areas of weakness and work hard to eliminate them.
Athletes should be taught the most important kind of success resides in their personal
improvement, giving their maximum effort, being willing to take risks, and striving to do
their best.
A coach needs to be there at all times to reassure athletes they are never losers when
they give their best effort, an important lession that will see them through many of
life’s most difficult endeavors.
Final Thoughts
All athletes are unique. They may range from 13-year-old boys and girls to 18-year-
old young men and women.
They come to a track and field program with different abilities, skill levels and
personalities. They all have different backgrounds, attitudes, expectations and needs.
One of the greatest challenges in coaching a sport such as track and field, which
involves working with a large number of athletes, is being sensitive to individual
differences and striving to make each athlete feel valued and important.
Finally, whether a coach is a full-time faculty member or a non-classroom coach, he
or she should try to become an integral a part of the high school community. A coach
should get to know the principal, front-office staff and fellow coaches, attend and

24
C h a p t e r 1
ask to be part of any pep rallies or assembly programs during the season, and write to
the athletes’ teachers and tell them about the objectives of the school’s track and field
program and invite them to attend one or more home meet—be sure to include a
schedule with accurate start times.
Having the support of the faculty, staff and administration can be invaluable, and the
more all of those groups become familiar with the coach and the program, the greater
the support will be.

25
C h a p t e r 1
1. Establish the well-being of your athletes as your #1 goal.
2. Use your sport to teach young athletes that victory and athletic achievement are
meaningful only if achieved in a fair and sportsmanlike manner.
3. Teach young athletes by example to respect their opponents, the rules of the sport, and
the role and judgment of officials.
4. Develop the competitive spirit of your athletes by encouraging them to "play to win."
But remember young athletes should derive primary satisfaction from the experience
of playing, improving, and attaining personal goals, which should not be limited to
winning.
5. Be reasonable when scheduling practices and competitions. Young athletes need some
time to be able to enjoy other worthwhile activities and interests.
6. Be sure your equipment and facilities meet safety standards appropriate for the age
and ability level of your athletes.
7. Never yell at your athletes for losing or making a mistake. Young athletes should be
able to participate in sports without fear of failure or ridicule.
8. Remember that young athletes thrive on enthusiasm and encouragement. Be positive
and generous with your praise.
9. Avoid overplaying your most talented athletes. All your athletes need playing time, or
experience in competition, to be able to develop.
10. Always follow a physician's advice when deciding when injured athletes are ready to
resume practice and competition.
11. Get to know your athletes' parents and encourage them to become supportive volun-
teers for Get to know your athletes' parents and encourage them to your program. Edu-
cate parents and volunteers to understand that the physical and emotional well-being of
young athletes can be threatened by programs that involve a high level of psychologi-
cal stress and over-zealous parental supervision to win.
T H E U S O C C O A C H I N G C R E E D F O R Y O U T H S P O R T S

26
C h a p t e r 1
A Show respect for athletes, officials, and other coaches.
B Respect the integrity and judgment of your officials.
C Establish standards , and be a model for fair play, sportsmanship, and proper conduct.
D Establish athlete safety and welfare as your highest priority.
E Provide proper supervision of your athletes at all times.
F Use discretion when providing constructive criticism and when disciplining athletes.
G Be consistent in requiring athletes to adhere to the rules and standards of the sport.
H Always instruct your athletes in the safe use of equipment.
I Do not exert undue influence on your student-athletes’ decisions on which college or
university they should attend.
J Avoid influencing student-athletes to take easier course work in order to be eligible to
participate in high school athletics.
K Do not encourage or permit your athletes to use performance enhancing drugs.
L Do not recruit student-athletes from other schools.
M Enforce the rules of behavior and procedures for crowd control established by your
conference and local board of education.
C O A C H E S ’ C O D E O F E T H I C A L C O N D U C T

27
2
C h a p t e r
Organizing a Track and Field Program
Organizing and directing a track and field program is an enormous
coaching challenge. Track and field is a collage of seven technical
sports: sprinting, hurdling, distance running, horizontal jumping,
vertical jumping, throwing, and pole vaulting. Track and field should
be the largest participation sport at every high school because it
accommodates an almost unlimited number of athletes with various
skills and combines seven individual sports into one team sport.

28
C h a p t e r 2
Responsibilities of a Head Track Coach
JOB DESCRIPTION
• Directs, organizes and supervises all aspects of a high school track and field program
in accordance with the objectives and guidelines set by the principal and athletic
department.
• Supervises assistant coaches and volunteers.
• Reports to athletic director.
• Serves at the pleasure of the principal.
Throughout the Year
• Set a good example. The head coach should always serve as an appropriate role
model for the athletes, the assistant coaches and all the other students in the school
at all times.
• Formulate goals and objectives for the coming season of competition.
• Inventory all school track and field equipment and materials and advise the athletic
department of what needs to be repaired, replaced and ordered for the coming season.
• Enhance and update the technical knowledge of the assistant coaches by providing
them with reading materials and encouraging them to attend coaching clinics.
• Check with the school, league, section, state and the National High School
Federation for any impending rule or policy changes that will affect the sport or the
program and make the coaching staff and team members aware of those changes.
• Implement a preseason training program within the guidelines set forth by the
school, league, section and state – all with the knowledge and approval of the site
principal.
• Be active in professional coaching organizations.

29
C h a p t e r 2
Organizing a Track and Field Programs
PRESEASON DUTIES
• Oversee the enrollment of all prospective team members in a PE track and field
class. Follow school procedures for adding students to those classes throughout
the semester. If the school does not have a track and field PE class, the head coach
should try to get one instituted.
• Make sure all assistant coaches (this includes volunteer, non-paid coaches) have
met all school, district and section coaching requirements such as first aid training,
coaching classes, fingerprinting, etc.
• Monitor the academic eligibility of all team members.
• Hold a meeting with the coaching staff to review the team policies, staff supervision
assignments (including locker rooms and awaiting buses after practice), safety
guidelines, emergency medical procedures, school policy for reporting accidents and
procedures for issuing team uniforms and equipment.
• Review the meet schedule with the athletic director. Confirm that appropriate
transportation needs are scheduled for all away meets.
• Send a letter to all opposing coaches for both home and away meets to confirm the
date of the scheduled contests, official meet start time, the number of divisions to be
contested, the number of athletes that will be allowed to participate in running and
field events, and which events will or will not be contested (ie. discus, triple jump).
• Meet with the head of maintenance to confirm home meet schedule and what will
be required to be set up for each home meet—be sure to include which gates need
to be unlocked, if lights will be needed, and which bathrooms need to be cleaned,
unlocked and stocked.
• Have a preseason meeting with the athletes and their parents. Introduce the
coaching staff, preview the meet schedule, and discuss the objectives of both the
team and coaching staff. Distribute copies of the team policies. Review the policies
with them, answer any questions, and have each athlete return one copy signed by
the athlete and his or her parents.
In-season DUTIES
• Organize, supervise and “coach” the assistant coaches, volunteers and student
managers.

30
C h a p t e r 2
• Convey a high expectation for the individual efforts, attitudes and behavior of
the athletes.
• Oversee the after-school and Saturday training sessions from start to finish.
• The head coach should not only script the daily training sessions on all the athletes he
or she directly coaches but also review the training scripts of all the assistant coaches.
• Coach the assistant coaches to help them to become better coaches.
• Compete ethically and fairly.
• Organize all aspects of the home meets.
• Submit the team's entries for invitational meets by the receipt deadline and
requisition the required entry fees.
• Check the academic standing and eligibility of all team members after each
grading period.
• Have regular meetings with the team and coaching staff.
• Enforce the safety procedures to protect the well being of the athletes.
• Show genuine concern for the progress and success of every athlete. Treat all athletes
as responsible young adults and provide them with enthusiastic leadership and
positive feedback.
• Discipline every athlete in a firm and fair manner in accordance with athletic
department guidelines. File a disciplinary action report with the athletic director
and inform parents when appropriate.
• Continually communicate with the principal, athletic department and school staff.
Postseason DUTIES
• Oversee the systematic return of all school uniforms and equipment.
• Hold athletes financially responsible for school equipment not returned according
to athletic department policy.
• Complete the documentation required to provide school athletic letters and awards
to the athletes.
• Submit a season summary report and a requested meet schedule for the next season
to the athletic director.

31
C h a p t e r 2
• Oversee the storage of all track and field equipment, implements and materials.
• Hold a wrap-up meeting with the athletes to allow them to evaluate the season,
critique the program, and offer suggestions for improvement. Encourage all
freshman, sophomore and junior athletes to become involved in other school sports.
Ask all your seniors if they would be interested in returning the following year to
help as a volunteer assistant coach or to help officiate at home track meets.
• Hold a wrap-up meeting with the coaching staff to evaluate the season, critique the
program, and implement new objectives and procedures for the next season.
The High School Coach’s Legal Liability
Due to the risks inherent in participating in sports, the high school coach has more
liability exposure than any other individual in the school.
Today’s coaching liability lawsuits focus on these eight areas:
• Failure to provide adequate advance warning of the risk of injury involved in
participating in school sports activities.
• Failure to have or to enforce rules and procedures for safe participation.
• Failure to provide proper supervision of an activity.
• Failure to provide and maintain a safe playing area.
• Failure to use proper coaching methods and provide adequate physical conditioning.
• Failure to provide safe transport to and from sites of competition.
• Failure to provide proper instruction for the use of athletic equipment.
• Failure to provide proper medical care to injured athletes.
HOW TO PROTECT ATHLETES AND LIMIT A COACH'S LIABILITY
• Advise all team members and their parents, in writing, of the potential risk of injury
inherent in sports participation and have both the athlete and parent sign a consent
and waiver/release form.

32
C h a p t e r 2
• Establish training safety rules and procedures for every event area with the coaching
staff. Go over all safety procedures for all events with the entire team. Distribute a
written copy of those procedures to all team members and have all team members
sign a form signifying they were in attendance at the safety meeting and they
received a copy of the safety procedures.
• Enforce safety rules and procedures.
• Develop a plan for dealing with a medical emergency during a training session or
home meet.
• Supervise potentially dangerous training activities at all times (especially practice
sessions for the throws, jumps and pole vault).
• Instruct athletes in the proper use of all equipment.
• Inspect and test all equipment before it is issued to or used by athletes.
• Be aware of the special medical history of each athlete (diabetic, asthmatic, allergic
to bee stings, etc.).
• Inform administrators immediately and in writing when equipment and facilities are
unsafe or inadequate.
Sexual Abuse in Youth Sports
The problem of sexual abuse of young athletes by adult coaches has gained increased
attention in recent years. Many youth sports organizations have taken steps to combat
the problem. The LA84 Foundation encourages all coaches to be aware of the issue
and learn what steps to take if you suspect a problem in your youth sports organiza-
tion. The Foundation also requires that all of it grantees have a written policy address-
ing their commitment to keeping their athletes safe from sexual abuse. For assistance in
developing a policy, or to become more knowledgeable about protecting the safety of
young athletes please see the Foundation’s Resource Guide On Preventing Child Sexual
Abuse in Youth Sports (http://la84foundation.org/1gm/ResourceGuide_frmst.htm).

33
C h a p t e r 2
Organizing a Track and Field Coaching Staff
The number of assistant coaching spots allotted by the school or district combined
with the number of candidates available and their experience and expertise should
determine the event coaching assignments of a high school staff.
Even if the school has separate boys’ and girls’ coaching staffs, it is strongly recom-
mended the staffs be combined and the coaching responsibilities spread among the
combined staff for the purposes of effectively training all athletes.
Track and field is viewed by many as a sport of coaching specialists. Track coaches are of-
ten times referred to as only a “jump coach” or the “distance coach” or the “vault” coach.
The problem is further exacerbated when track coaches themselves only see their role
as one of the “high jump coach” or the “hurdle coach.” There is virtually no other
sport where coaches perceive themselves as only “knowing” one aspect of their sport.
There certainly are specialists in other sports such as an offensive coordinator in foot-
ball or a hitting coach in baseball, but even those coaches know some, if not a consid-
erable amount, about the other facets of their sport.
It is certainly a challenge for any track coach to master the complexities of one event
area; furthermore, the coaching sciences of exercise physiology, biomechanics, nu-
trition, and sports psychology are constantly providing coaches with effective new
methods of training and preparing; however, that doesn’t mean track coaches, espe-
cially head coaches, should become isolated and solely concentrate their efforts into
one event area.
A head coach should feel an obligation to work towards becoming reasonably pro-
ficient in coaching every event area, so he or she can not only train new assistant
coaches when necessary but also serve as a second set of “eyes” or another resource for
experienced assistant coaches. Furthermore, there may be years where the head coach
may find he or she has an assistant coach that can only coach the same area as the head
coach but no other area, and in that case, the head coach may best serve the needs of
the program by coaching another event area.
All assistant coaches should make an attempt to begin to learn at least one more event
area. There will certainly be times both in practice and meets when an event area coach
has some free time where he or she could help other event area athletes, especially be-
ginning athletes who are just learning the basics of their events. Additionally, it serves

34
C h a p t e r 2
to bring a team closer together when the assistant coaches have a good relationship
with all the athletes, not just the ones in his or her event area.
The process of learning a new event area should be viewed as a long term project for
assistant coaches. To learn a new event, a coach should begin by attending clinics, read-
ing books, and by watching other exemplary coaches during practice and meets. He or
she should then try to pick up the basics of technique first, and then an understanding
of training later.
BUILDING A STAFF
Often times, the first job a head coach will have is recruiting assistant coaches. In
recruiting assistants, it is often better to choose inexperienced coaches with enthusiasm
and personality who are anxious to learn rather than individuals with track and field
expertise who lack leadership and communication skills.
New coaches often want to train with their athletes. This is not a good idea. Aside
from the temptation to do their own training rather than the training their athletes
need, it severely limits a coach’s ability to organize, observe and critique a training
session. It is an especially bad idea for running event coaches. Coaches who run with
their athletes lose all perspective of the performance of those running behind them
and are thus unable to coach the less advanced athletes who need their evaluation and
encouragement the most.
It is best to begin training novice coaches by having them observe the head coach or
another experienced assistant coach working with athletes in their event area. The next
step is to have the novice assist in directing specific parts of several training sessions
(the head coach should tell the novice in advance what to do and for what to watch).
Finally, when the new coach becomes familiar with the system of instructing and or-
ganizing athletes, the head coach should give the new coach a script prior to each day’s
training and let the new coach administer the workout. (A sample training session
script form is included in each event chapter of this manual.)
This would be a suggested breakdown of event coaching assignments for a staff of
six coaches:
• Sprint Coach — 100m, 200m, 400m, 400m Relay, 1600m Relay
• Hurdles Coach — 100mH, 110mH, 300mH
• Distance Coach — 800m, 1600m, 3200m

35
C h a p t e r 2
• Jumps Coach — Long Jump, Triple Jump, High Jump
• Throws Coach — Shot Put, Discus
• Vault Coach — Pole Vault
The next best breakdown would involve five coaches:
• Sprint/Hurdle Coach — Sprints, Relays and Hurdles
• Jumps Coach — Long Jump, Triple Jump, High Jump
• Vault Coach — Pole Vault
The next breakdown would involve four coaches:
• Sprint/Hurdle Coach — Sprints, Relays and Hurdles
• Jumps Coach — Long Jump, Triple Jump, High Jump, Pole Vault
And finally, the best breakdown for three coaches:
• Running Event Coach — Sprints, Relays, Hurdles and Distances
• Jumps Coach — Long Jump, Triple Jump, High Jump, Pole Vault
These coaching assignment breakdowns recognize that field events are the most
technical events in track and field and require the greatest amount of instructional
time to achieve mastery, and the most direct supervision to ensure safety.
A track and field program cannot provide coaching for athletes in 15 events with less than
three coaches! Use the issues of supervision, safety and athletes per coach to lobby your
school’s administrators to increase the number of paid assistant coaches allotted for the
track and field program.
Planning and Scripting Training Sessions
Each daily training session should meet the needs of your athletes while making the

36
C h a p t e r 2
best use of your practice time and coaching staff.
If you have an experienced coaching staff, each coach should be responsible for plan-
ning and scripting each day’s training for his or her respective event area. Head coaches
should give inexperienced coaches a script for each day’s training and have them admin-
ister the workout. Communication and cooperation among coaches is essential, espe-
cially when athletes are working with more than one coach to train for multiple events.
Each athlete on the team should be designated as a specialist in one event area – this
is probably going to be the event in which the athlete will compete during the cham-
pionship part of the season. The coach responsible for that event area should then
become the athlete’s “primary coach”—the coach responsible for coordinating that
athlete’s entire training program for the season.
The athlete should begin each training day by checking in with the “primary coach” to
find out what that day’s training will be. The primary coach should have already dis-
cussed with the other coaches on the staff when and to what extent his or her athletes
will work that day with those other coaches in their event areas.
At the end of the training day, the athlete should once again check in with his or her
“primary coach.” In fact, there may be some days where the athlete will spend the en-
tire training day with another event area coach; however, the primary coach will always
know exactly what type of practice and what type of workload the athletes completed,
so the next day and following week’s training can be appropriately planned.
A hard day of training should be followed by an easier day so the athlete can recover
before beginning another quality training session. Multi-event athletes who go from
one coach to another without a coordinated training plan are extremely vulnerable
to injury and burnout. The head coach may have to be an arbitrator for the training
schedule of a star athlete who competes in several event areas.
Placing athletes in the right events is oftentimes the difference between winning or losing
a close dual meet. Lineups should be planned, distributed to the coaching staff and post-
ed for the athletes as far in advance of the meet as possible…one week at a minimum.
Once a meet lineup is set, only the head coach should ever make a change. An assistant
should never remove or add an athlete from an event without discussing it with the

37
C h a p t e r 2
head coach first. This is not a matter of maintaining a protocol or a "pecking order", it
is a matter of making practical decisions that can affect a team.
For example, if an assistant coach adds an athlete to an event, it may be the fourth
event of the meet for the athlete and he or she may no longer compete in any other
events. The head coach may have been saving that athlete as a back up to run a leg in
a relay for another athlete who was nursing an injury. Conversely, if two or even three
assistant coaches pull athletes out of events, then all of the sudden a meet that was not
suppose to be close, becomes so.
Preparing for the Season
At the end of each track season, it is important that coaches assess the condition of
their facilities and equipment and inventory their implements and team uniforms
for the following year. Requests for facility improvements, repairs, and new equip-
ment usually must be submitted to a school or district prior to the end of the previous
school year.
However, if no requests were made at the end of the previous year, those requests
should be made as soon as possible in the current school year. Funding sources become
available at odd times during the year, and principals have some leeway in determin-
ing how that money will be spent. If a coach has a request sitting on the desk of the
principal when new money becomes available, there is a chance the proposal will be
funded. If any coach is waiting for the principal to come ask if there is anything the
team needs, that coach may be waiting for a long time.
The following pages list items that should be assessed and inventoried at the end of the
previous track and field season. Copies of these assessments should be given to both
the site principal and athletic director. It is imperative that coaches provide administra-
tors with written documentation as to what is unsafe or inadequate!
RECRUITING TEAM MEMBERS
Recruiting students to become a part of the track and field program at the school
should be a year round obsession for the head coach, the assistant coaches, and every
current member of the team.

38
C h a p t e r 2
It may seem at first as though track and field may be at a disadvantage in the fact that
most high school students have never participated in the sport as a youngster, as they
may have with soccer, volleyball, baseball, basketball or football. They also may never
have even seen a track meet in person or on TV; however, that can be a huge advantage.
Today, many high school students have already been turned off to those other sports
because they either did not enjoy them as kids or overzealous fathers or coaches
weaned them out before they had a chance to blossom. They have already had it drilled
into their heads by age 13 that baseball or basketball or soccer is not for them. Those
kids are looking for something in which to become involved.
Track and field offers every single student in a school a level playing field from which
all athletes may begin anew. Who has pole vaulted before high school? How many kids
have ever seen a discus? What makes up a triple jump? That is how the program can
be sold. Kids should be told over and over again that any one can be successful at this
sport. You don’t have to be tall or strong or even fast, and you certainly do not need ex-
perience. It just takes work, and coaches should let kids know they know how to take
average kids and make them successful.
Furthermore, coaches should go after the great athletes also. Recruit to track and field’s
strengths. Tell the lineman who toils in the obscurity of the mud that in track he will
shine in the discus ring. Tell the basketball player who never gets to shoot that she can
be league champion in the high jump. Tell the soccer player that the previous 10 years of
running have developed an incredible VO2 MAX and she will shine as a distance runner.
No one should be overlooked. A coach can never tell by simply looking at a group
of kids standing in the halls which student will be a fast sprinter, who will be a great
thrower, who will recruit even more kids to come out, or whose life will be changed by
becoming involved in a sport which rewards hard work.
Once the snowball starts rolling down the hill, it will get larger and larger. The more
successful and visible any extracurricular program is at a school, the more likely it will
attract students to join. This is especially true with track and field.
Track coaches should look to a variety of sources for potential recruits.
One great place to look is in the sports that have their seasons prior to track and field.

39
C h a p t e r 2
Certainly, excellent football, volleyball, basketball and soccer players should be identi-
fied, and several track coaches and teammates should begin talking with those athletes
about coming out for track.
Ironically, another great place to find potential recruits is in the lists of the athletes
who did not make the basketball, soccer or wrestling teams. Track is a great place for
those kids—they already have demonstrated they want to be on an athletic team, they
have already been cleared to try out, and most of the time they are decent athletes
whose bodies have just not yet physically matured or they just don’t have the experi-
ence some other students have in that other sport.
The track coach should make an effort to find out when “cuts” are made in those
sports and be there at that moment to pick those kids up and get them involved in the
off-season conditioning program for track and field.
Another recruiting “gold mine” is to institute a PE Track and Field Unit at the school.
Even if the track coach is not a physical education teacher, he or she can set up a unit
that takes the students through the basic events of sprinting, hurdling, jumping and
throwing. The track coaching staff can help by making sure all the implements and
equipment are readily available and easy to use; furthermore, the staff can provide a
simple in-service for the teachers in the PE department to show them just a bit about
technique. If the head coach or any of the assistants are not classroom teachers, they
should offer to come help during the school day with the track PE class.
The only thing the track coach should ask for in return is for the PE teachers to make
a list of the names of the top kids in each event in their classes. Those names should
then be posted everywhere for everyone to see; furthermore, those kids on the lists
should get a personal invitational from one or more of the track coaches to come out
for a sport they now know they already can do well.
The best recruiters may actually be the other members of the team. They know the
better skilled athletes in the school, and they should be encouraged to help recruit new
team members, or at the very least identify them for the coaching staff.
More Ideas to Recruit Track and Field Athletes
• Get a list of the USATF youth track clubs in the area. Ask the coaches for their
rosters and for permission to talk to their kids about the high school program.

40
C h a p t e r 2
• Do the same at the junior high schools in the area. If there are rules that prohibit a
high school coach from recruiting at the junior highs, the track staff should offer to
put on an all-school assembly program with track and field demonstrations for them.
• Send a letter to the school’s incoming freshmen inviting them to join the track and
field team.
• Get to know which of the current team members have younger brothers and sisters.
• Ask the school’s counselors to encourage their students to join the team.
• Ask coaches of other sports to recommend their athletes participate in track and
field in the spring. Demonstrate to those coaches that having their kids involved in
track will improve the physical abilities of those kids so when they return to their
original sport they will be better athletes.
• Ask to speak to the PE classes at the school.
How to Promote Track and Field at Your School
• Put together a good coaching staff. If no one with track and field expertise is
available, recruit popular teachers and train them to be track coaches.
• Make track and field the largest athletic team at the school! Emphasize that fact with
the administrators when lobbying for increased ﬁnancial support for the program.
• Don’t cut anyone! A program can never have too much depth; furthermore,
successful track and field athletes can be built over time. Ninety-nine-pound
freshmen develop into 170-pound seniors, and 13-year-old children become
18-year-old young adults.
• Have a large, visible track and field bulletin board located where everyone in the
school is going to see it. Keep it up to date with photographs, newspaper clippings,
lists of top performers, etc.
• Have a large, visible track and field record board. Showcase the varsity school
records by posting them in larger print than the frosh/soph records.
• Start a parents' boosters club. Get the parents involved in helping to raise money
and to help push the administrators for facility improvements and new equipment.
• Email a track newsletter to everyone.

41
C h a p t e r 2
• Videotape the meets and show them during school lunch periods.
• Present small prizes (such as Halloween candy bars) each time an athlete sets a new
personal best. Give special certificates for new school records.
• Have an awards banquet or potluck at the end of the season.
• Become friends with the maintenance staff and school secretaries. They are the ones
who run the school.
• Get publicity for the program in your local paper by writing articles and submitting
them with some photographs.
• Have one or more of your “techie” students create a maintain a track and field
web site.
• Upgrade the school’s track and field facilities. Be a “squeaky wheel” with the
administrators and push them for a metric track; all-weather runways; top quality
jumping pits, standards and throwing circles; and a bigger budget for the program.
• Set some realistic goals for the team each season and create some clamor when they
are achieved.
• Make the program fun! Plan recreational events such as having a pizza night with all
the kids’ parents after a home meet.
• Make home meets the best meets on the schedule. Recruit and train faculty members
as officials. Provide them with hats and jackets. Have a PA system and a good
announcer. Host an invitational meet. Be creative and make the invitational format
something unique (e.g., girls only, frosh/soph only, mixed events, all relays, etc.).
How to Keep Athletes Healthy
• Coaches should plan and periodize an athlete’s training. Training volume and
intensity should be matched to the age and fitness levels of the athletes. Stair-step
training volume and intensity (e.g., 45 miles one week, followed by 30 miles the
next week, followed by 50 miles the next week, etc.).
• To increase training mileage, do two shorter runs a day, rather than one long run.
Do no more than one long run of 10-12 miles or more a week.
• Do no more than one intense repetition or interval workout a week, or three such
sessions within two weeks.

42
C h a p t e r 2
• Allow a minimum of one day of complete rest every 14 days. Group athletes
in training so that older, more mature runners don’t run the younger ones into
the ground. Choose Saturday competitions carefully. Training is critical to the
development of athletes, and they cannot train much if a meet is scheduled every
Thursday and Saturday for 16 weeks. Maximize bouts of training, minimize bouts
of competition.
• Don’t double or triple distance runners in the 800m, 1600m and 3200m to score
points in dual meets more than absolutely necessary.
• Be sure athletes train in good shoes. Do most of the training in training flats, not
racing flats or spikes.
• Ask athletes to inform a coach if they are chronically sore or hurt. Athletes should
never fear repudiation for telling a coach they are hurt. Coaches should talk to the
administrators of a physical therapy center in the area and ask them to become
community partners in helping treat and manage the athletes’ injuries early, before
they become disabling.
Sample Team Guidelines (Distribute to Athletes)
Academic Eligibility
In order to participate in athletics, you must meet the school and the district’s mini-
mum standards for participation (each school should input it own standards here).
Your grades and conduct in school reflect on our team. We want you to take advantage
of the opportunity we are giving you to become the best student and the best athlete
you can be. If you are having problems in any of your classes, let us know immediately
and we will try to get you some tutoring help.
Practice Attendance
We expect you to be at training every day, on time! Our daily training
sessions usually end by 4:30 p.m.. Be dressed and ready to go by 2:00 p.m.. Check
the track bulletin board every day before practice to see where to assemble with your
primary coach.
If you are detained by a teacher or another school club activity, you must bring a note
signed by that teacher or sponsor to be excused for being late to training. These delays
should occur no more than two or three times a semester.

43
C h a p t e r 2
If you are unable to attend school because of an illness, a doctor’s appointment or a
family emergency, you or your parents must call to inform the coach of your impend-
ing absence that day by 12:00 noon. My office phone number is 123-4567. If you
have an unexcused absence from training, you will not be permitted to compete in our
next meet.
Physical Examinations and Insurance
All members of (your school) athletic teams must meet the school and district mini-
mum standards for medical clearance. (Each school should input it own standards here.)
Team Uniforms
You will be issued a competition singlet, running shorts and a team warm-up suit.
These are the property of (your school) and must be returned at the end of the season.
You will be billed for the replacement cost of any equipment you do not return.
Shoes
You will need to buy a track bag for all your gear and a pair of training and/or racing
spikes for competition and training. Ask your coaches for specific recommendations
before you purchase training or competition shoes. You will also need a set of replace-
able spike elements for the dirt and all-weather surfaces on which we compete.
Home Meet Procedures
Every week our team lineup sheets will be posted on Monday. The sheet will indicate
when to begin warming up for your event(s). Your preparation for competition should
follow the same sequence as your every day training: running warm-up, stretching-
rhythm drills and buildup runs. Your warm-up should conclude approximately five
minutes before the start of your event.
Meet-Day Preparations
Get a good night’s sleep the evening prior to the meet, but do not alter your routine by
going to bed at 7:00 p.m. if you normally turn in at 10:00 p.m..
Use common sense and don’t eat anything that tends to disagree with you the night
before or day of a meet. On meet day eat a light lunch. If your lunch period is too
close to your race time, eat your lunch earlier.

44
C h a p t e r 2
Put the proper length spikes in your shoes the day before the meet. Double check your
track bag to be sure you have everything. Have your own spike wrench or vice grips in
your bag for last minute spike changes. Write your name on every piece of equipment
you have! Jumpers should have a personal runway marker to mark their approach such
as a tennis ball or Whifﬂe ball with a long nail or pencil through it.
Away Meet Procedures
The buses will leave school at 1:20 p.m. sharp! Travel time may occasionally require us
to leave sooner. Report to the bus dressed to compete with all your equipment. If you
need to see the trainer, take care of it at the beginning of your lunch period.
When we arrive at the meet, we will designate a spot for our team area. Stay in our
team area during the meet when you are not competing, warming up, or cooling
down. You are not to wander around the school or leave campus! At the conclusion of
the meet, we will reassemble in our team area, then move to the buses for departure
back to school.
OTHER TEAM POLICIES:
• We will have a team meeting every Wednesday before practice at 2:30 p.m. sharp.
• You must dress for training every day in proper T&F apparel.
• You may not leave training until you are dismissed by your primary coach.
• At our home meets, everyone stays until the conclusion of the last event.
• You may not compete in any track and field meet or road race that is not on our
school schedule without your coach’s approval.
• You are ﬁnancially responsible for any equipment that is issued to you, including
batons, shots, tape measures, etc.

45
C h a p t e r 2
Key:

(US) = UNSAFE/needs repair
[US] = UNSAFE/needs replacement
E = excellent condition
G = good condition
P = poor condition
____Surface of track
____Drainage of track
____Curbing of track
____Surface of shot circles
____Toeboards on shot circles
____Markings on shot circles
____Surface of discus circles
____Rings on discus circles
____Markings on discus circles
____Surface of long jump/triple jump runways
____Takeoff boards on long jump/triple jump runways
____Sand in long jump/triple jump pits
____Depth of sand in long jump/triple jump pits (12” minimum)
____Approach area for high jump
____High jump landing pits
____Pads for high jump standards
____Surface of pole vault runways
____Pads for pole vault standards
____Pole vault boxes
____Pole vault landing pits
Notes:
track & field facilities assessment

46
C h a p t e r 2
Need: Have: (in good condition)
____ ____ Hurdles
____ ____ Hurdle carts
____ ____ Starting blocks
____ ____ Mallets for starting blocks (dirt track)
____ ____ Block cart
____ ____ Lap counter
____ ____ Lane markers: ___1 ___2 ___3 ___4 ___5 ___6 ___7 ___8
____ ____ Indicator boards (for height or distance):
____HJ ____PV ____LJ/TJ ____Shot put ____Discus
____ ____ Pennants flags to rope-off shot/discus landing sectors: ____feet
____ ____ Throwing sector marking tape: ____rolls ____ground staples
____ ____ Distance markers for shot/discus
____ ____ Rakes for LJ/TJ pit
____ ____ Shovels for LJ/TJ pit
____ ____ High jump crossbars (4m in length)
____ ____ Pole vault crossbars (4.5m in length)
____ ____ Stopwatches
____ ____ Batons
____ ____ Track & Field scorebooks
____ ____ Megaphones
____ ____ Ofﬁcials' ﬂags (red & white)
____ ____ Boys’ shots (12lb)
____ ____ Girls’ shots (4kg)
____ ____ Boys’ discus (1.6kg)
____ ____ Girls’ discus (1kg)
track & field e q uipment inventory

47
C h a p t e r 2
Sizes: SM MED LG XL XXL
NEED/HAVE (in good condition)
boys’ singlets
boys’ shorts
girls’ singlets
girls’ shorts
practice sweat tops
practice sweat bottoms
meet warm-up tops
meet warm-up bottoms
Notes:
Date completed:
Coach’s signature
cc: Principal
Athletic Director
track & field uniform inventory
N NN N NH H H H H

48
C h a p t e r 2
I dentifying P otential A thletes
Long legs, excellent vertical jumping ability, good speed:
Vertical jumping ability is a much better indicator of long and triple jumping potential than high
jumping potential. This is because an athlete must create a great moment of force at takeoff to jump
high vertically or long horizontally, while the universal flop technique of high jumping employs
takeoff mechanics of transfer of momentum. The ability to create horizontal velocity (speed on the
runway) is another important asset for long jumpers while long leg levers are an obvious asset for
triple jumpers. Good horizontal jumpers can often sprint or hurdle as second events.
Tall, lean body-type, good coordination and sense of rhythm:
Being tall and thus having a high center of mass is an advantage in an event where you have to
raise your center of mass several feet off the ground to snake backward over a horizontal cross-
bar! More than speed or explosiveness, the high jump requires a rhythmic transfer of horizontal
velocity into a vertical takeoff, clearance and landing. Good high jumpers can often hurdle or
triple jump as second events.
Large, athletic body-type with a “good arm”:
The throws are the most technical and explosive events in track and field. It is not unusual for
a good shot putter, in particular, to be able to run stride-for-stride with a good sprinter for 30
to 50 meters. Body mass and long arm and leg levers help propel the mass of the shot and
discus. But more than size and strength, the throws require great timing, coordination and agil-
ity to accelerate the implement across the circle. Most of all, shot putters and discus throwers
must have a good arm. Examples of a good arm include the ability to rocket a volleyball serve
into the backcourt from 15 feet behind the end line, the ability to throw a football 50 yards
downfield, or the ability to throw to home plate from deep center field. You can train athletes to
be strong enough to lift up one end of the weight room, but if they cannot post on their opposite
leg, lead with their hip, torque-drag their arm through, release and reverse, they will never
develop into shot putters or discus throwers.
Aggressive athletes with all-around ability:
The pole vault requires more all-around athletic ability than any other track and field event. Pole
vaulters need to have the arm strength of a wrist wrestler, the speed of a sprinter, and the agil-
ity of a gymnast. Most important, pole vaulters must have a passion for catapulting themselves
off the ground as high as they can onto their backs! Good pole vaulters can often sprint, long
jump, or hurdle as second events.
LONG AND TRIPLE
JUMPERS
THROWERS
HIGH JUMPERS
POLE VAULTERS
Event What to Look For

49
C h a p t e r 2
What to Look ForEvent
I dentifying P otential A thletes
Above average height, good sprinting ability, agility, aggressiveness and men-
tal toughness:
The hurdles require special athlete personalities. Male 110m hurdlers should be above average
height or have a high split, but all hurdlers must have a mind-set to attack the hurdle, not merely
negotiate it. Hitting hurdles is part of being a hurdler, and athletes have to be tough and aggres-
sive enough to ignore bruises and scrapes and an occasional fall. Tall, lean athletes with league
champion sprint speed can develop into state champion hurdlers. Introduce them to the hurdles
ﬁrst! You will quickly see whether they possess the personality and ballistic agility to become
hurdlers. If not, they can always move on to the sprint events. Good hurdlers can usually run the
sprints, relays, or compete in the jumps as second events.
Small, lean body-types, tenacious workers, good students:
Small, lean body-types are not well suited for most other sports or track and field events, but
they can develop into great aerobic athletes. It requires an extraordinary amount of persistent,
dedicated training to become a good distance runner. Distance runners have to be self-
motivated and able to see success at the end of a long path of development. Good students
usually have all of those personality traits.
Strong, muscular body-types, self-assertive or having a reputation for out-
standing sprint speed:
Sprinting is a power activity. Sprinters have to be able to apply a great amount of force to the
ground repeatedly, in very short moments of time, for 10 to 50 seconds. Most sprinters either
have muscular body-types or a predisposition to become so with training. In scouting other
sports for potential sprinters you should realize the difference between “quickness” and track
speed. To run with great speed over 100 to 400 meters, sprinters must accelerate for 50 to 60
meters, then decelerate as little as possible over the remaining distance. Running speed is prob-
ably the most easily recognized athletic skill. By the time youngsters get to high school, they
know from their neighborhood contests whether they have superior running speed. If you ask
what events they would like to try, the fastest will tell you, “I’m a sprinter.” Good sprinters can
usually long jump as a second event.
HURDLERS
DISTANCE
RUNNERS
SPRINTERS

50
C h a p t e r 2
As a guide for evaluating your program throughout the season, consider
the following 15 questions:
1. What are our goals?
2. Are we improving and making progress?
3. Are we organized? Are our training sessions well-planned?
4. Is our training what we need?
5. Is our program fun?
6. Do we look and act like a team?
7. Are we always appropriate role models as coaches?
8. Are we in touch with our athletes? Do we listen?
9. Do we treat every athlete with dignity on a first-name basis?
10. Are we fair, firm and consistent in dealing with our athletes?
11. Are we teaching our athletes to be self-disciplined and responsible?
12. Are we protecting the safety and well-being of our athletes?
• Good equipment & facilities
• Safe training practices
• Proper supervision
• Prepared for emergencies
13. Are we showcasing our program in our school?
14. Do our home meets promote track and field as a spectator sport?
• Efficiently managed
• Well-officiated
• Quick-paced
• Informative PA announcing
15. Do we work as hard as our football and basketball coaches?
evaluating your program

51
3
C h a p t e r
Principles and Methods of Training
To train athletes, a coach must have an understanding of the basic
principles that govern a human being’s physical and mental response
to training. Intelligently and systematically applying a basic knowledge
of biomechanics and physiology helps create good track and field
athletes. The training a coach devises will become a recipe that
combines conditioning, mobility and flexibility training, strength
and plyometric training and specific event technique. Only in this
way does optimum performance become a matter of planning, not
happenstance.

52
C h a p t e r 3
Teaching Track and Field Skills
Every track and field event involves technical skill. Some events are more complex
than others, but even distance running involves proper mechanics and movement
skills.
There are several immediate challenges in coaching athletes new to track and field.
• Evaluating the skills they bring to the sport.
• Matching them to the event area(s) where they can experience the most success.
• Teaching them a progression of skills that will enable them to achieve a level of
proficiency.
Among any group of novice athletes, some will be more skilled than others, some will
have multiple skills, and all will have a somewhat different rate
of learning.
The actual instruction of a skill should involve the following:
• a demonstration
• an explanation
• an attempt of the skill
• a critique of the attempt
A coach does not have to be able to demonstrate a skill with great proficiency to be
able to teach it well. The coach does, however, have to be able to break down skills
to their simplest elements, know what is mechanically correct, and detect and correct
mistakes.
If a coach is not capable of demonstrating a skill, one of the better athletes on the
team can be used as a demonstrator.
When demonstrating, the coach should repeat the demonstration several times while
explaining the skill. The initial skills should remain simple, the explanation should be
simple, and the athlete should be given plenty of time to practice the skill.
While the athletes are practicing the new skill, the coach should correct mistakes by

53
C h a p t e r 3
using the same verbal cues he or she will use throughout the season. The feedback
should to be positive, precise and verbally accurate.
Coaches should not try to correct more than one fault at a time while at the same
time always looking to praise the things the athletes are doing well. Coaches should
be liberal in their use of praise and encouragement.
When progressing to more complex skills, the coach should begin by going back to a
simpler skill or a drill that utilizes several component skills. When athletes fail to pick
up a new skill or drill, the coach should break it down to its simplest components or
go back to a less complex skill.
When trying to work with a large group of athletes attempting a new skill or drill,
they should be divided into groups by ability, regardless of their age or gender.
Athletes will feel more competent and successful working with others of similar skill
levels. Experienced athletes can be used at the front of each small group as an example
of how the drill should be done.
Athletes should be arranged in flights of no more than three so the coach can
effectively observe and critique them. As athletes begin to master the skill, they should
be encouraged to help teammates who are having difficulty.
Athletes should always try to identify the specific skills they need to practice on their
own. They should be challenged to take on the responsibility themselves for mastering
their events.
BASIC BIOMECHANICS FOR TRACK AND FIELD
Certain physical laws govern all motion. The sport of track and field is no exception.
On the contrary, in a sport whose essence is the most efficient and forceful expression
of human movement, these physical laws continually reveal themselves. For this
reason, the coach must be familiar with how the laws of physics govern athletic
performance. This relationship is called biomechanics.
BASIC BIOMECHANICAL PRINCIPLES FOR TRACK AND FIELD
The science of biomechanics explains how movement is affected in the track and field
athlete’s attempts to run faster, jump higher or longer and throw farther. To teach,
observe and correct technique, the coach must have a general understanding of these

54
C h a p t e r 3
principles. To teach any athletic skill properly, the coach must correctly apply basic
biomechanical principles to an athlete’s training.
Following is a short discussion of some of the most important principles affecting
track and field performance.
THE LAW OF INERTIA (NEWTON’S FIRST LAW)
“Every body continues in its state of rest, or of uniform motion in a straight line, except in
so far as it may be compelled by impressed forces to change that state.”
In other words, a body at rest will remain at rest unless put into motion by some
force. Conversely, a body that is in motion will remain in motion unless brought to
rest by an opposing force. However, in terms of increasing the speed of an object,
inertia still must be overcome. In relation to inertia, rest and uniform motion are the
same thing.
LINEAR MOTION
• Linear motion is the movement of a body along a straight line with all its parts
moving equal distance and direction at the same time. Track and field events rarely
exhibit pure linear motion, but every event involves some form of it.
• Linear motion is measured by two parameters: speed, or rate, of motion, (e.g., 9
meters-per-second) and direction.
• The measure of speed in a particular direction is velocity. Many track and field
events involve the application of force or speed in multiple directions. The high
jump is an example. As the athlete jumps, vertical velocity carries the jumper
over the height of the crossbar. At the same time, horizontal and angular velocity
carry the jumper from the takeoff point into the landing pit. Linear motion also is
measured by changes in velocity.
• A positive change in the rate of motion is termed acceleration; a negative change (or
slowing) is negative acceleration, or what is commonly called deceleration.
• An important measure of acceleration is the gravitational constant. All bodies,
regardless of weight, fall with a constant acceleration (or increase of speed) of
32 feet-per-second. This law is fundamental to understanding the trajectories of
jumping and throwing.

55
C h a p t e r 3
ANGULAR MOTION
Angular motion is often known as rotation. Angular motion is the movement of a
body around a fixed axis, resulting in a circular pattern. An axis is the imaginary point
or line around which the motion of the body occurs. The human body is considered
to have three primary axes which pass through its center of mass:
• the longitudinal (head-to-toe)
• the transverse (side-to-side)
• the frontal (front-to-back)
When a body rotates around two or more axes simultaneously, such rotation is called
nutation. A discus that wobbles during flight is in nutation. Most movement of the
human body is a combination of linear and angular motion.
THE LAW OF ACTION AND REACTION (NEWTON’S THIRD LAW)
“To every action there is an equal and opposite reaction; or the mutual actions of two
bodies in contact are always equal and opposite in direction.”
In other words, “for every force there is always an equal and opposite force acting in
an opposite direction.” When an athlete applies force to the ground, it reacts with an
equal amount of force or resistance. If the force applied is greater than the athlete’s
weight, it will cause the athlete to accelerate away from the ground. This acceleration
may occur vertically, horizontally, or in combination.
TRANSFER OF MOMENTUM
As a body accelerates, it acquires momentum (mass x velocity). If that acceleration is
suddenly stopped, the acquired momentum must transfer to another object or part
of the body. The transfer of momentum plays a significant role in the execution of
several track and field events. In the high jump, for example, momentum from the
drive of the free leg and the arms is transferred to the body, resulting in a stronger
impulse off the ground. In the throws, blocking the free side before release results in
greater angular momentum being applied to the implement.
CENTER OF MASS
An object’s center of mass is the point in space around which the object’s mass is
concentrated. Center of mass is often referred to as the center of gravity. In a solid
object, such as a shot, the center of mass is stationary and located near its center.

56
C h a p t e r 3
With a human body, however, the center of mass changes relative to the position of
the body. In a normal standing position, the body’s center of mass is just above or
below the navel. As body positions change, however, the center of mass shifts. During
the performance of many track and field events, the center of mass is actually located
outside the athlete’s body. To be balanced, the body’s center of mass must be above at
least some portion of the base of support. In biomechanical terms, the act of running
can be defined as a continuous and frequent forward shifting of a person’s center of
mass. Likewise, jumping can be described as the propulsion of a body’s center of mass
away from its base of support.
CURVES OF FLIGHT
When an object is put into flight, the path of its center of mass is fixed once it leaves
the ground. The center of mass follows a parabolic curve that remains unaffected
by any action of the body in the air. That parabola is determined by horizontal and
vertical velocity along with the effects of gravitational acceleration toward the ground.
Although the path of the center of mass is determined once the body leaves the
ground, movement of the body can affect its position relative to its center of mass.
This allows jumpers, for example, to increase their performance by moving their
bodies forward or above the paths of their centers of mass.
The optimum angle of projection of an object to obtain the maximum distance in
flight is 45-degrees. This is true only if the point of landing is at the same level of
altitude as the level of projection. (Try experimenting with a garden hose turned on
to a constant stream.) In track and field, however, this is never the case. The level of
projection is always higher than the point of landing. When the level of the point of
projection is higher than the point of landing, the optimum angle of projection of an
object decreases. The difference in height levels reduces the amount of vertical velocity
necessary to achieve maximum distance.
Aerodynamic qualities also affect the flight curve of an object, thereby altering the
optimum angle of projection. The aerodynamic nature of a body has the effect of
lowering the point of landing. Air resistance as a body descends works to keep it aloft
for a greater period of time, so the optimum angle of projection decreases.
AIR RESISTANCE
Air resistance plays a significant role in track and field. Resistance in the form of a
tailwind or headwind substantially affects times in the running events. Though a

57
C h a p t e r 3
tailwind enhances speed, a headwind has an even greater effect in reducing speed. In
the jumping events, wind affects both speed and accuracy. In the discus, wind and air
resistance greatly affect the aerodynamic behavior of the implement.
ANGULAR MOTION IN THE AIR
When an athlete leaves the ground, there is almost always some rotation around
a primary axis. This rotation is caused by eccentric thrust, an application of force
away from the center of mass. Airborne rotation is most easily seen in the jumping
events, but occurs in running and throwing as well. Angular motion that is initiated
by movement in the air results in an opposite reaction of the body. This explains the
behavior of a jumper’s body during flight.
THE CONSERVATION OF ANGULAR MOMENTUM
Resistance to a change of inertia in angular motion depends upon the distribution of
an object’s mass around its axis. The resistance of a given mass is directly proportional
to its distance from the axis. This phenomenon reveals itself often in track and field,
from the arm carriage of a sprinter to the free arm pull of a shot or discus thrower.
CENTRIFUGAL AND CENTRIPETAL FORCE
Centrifugal and centripetal forces are the forces that pull away and toward an axis
of rotation. The balance of these forces is what keeps a runner on the curve during
a race. The proper use of centrifugal force in the high jump enables the jumper to
achieve the necessary rotation to carry him or herself from takeoff into the landing pit.
APPLYING BIOMECHANICS TO THE RUNNING EVENTS
The running stride has three phases:
• Drive
• Recovery
• Braking
The drive pushes the body forward off the supporting foot. The recovery phase occurs
when both feet are in the air. The braking phase begins as the lead foot touches the
ground, causing a momentary braking or slowing. As the body’s center of mass passes
in front of the foot, the next stride and drive phase begins.
Running speed is a function of two things: stride length and stride frequency. However,

58
C h a p t e r 3
increasing stride length by over-striding reduces speed because it increases the time
of the braking phase. Conversely, overly short strides, or under-striding, may increase
frequency but still reduce speed because of the decrease in stride length. Stride length
is determined by leg length, leg strength and running mechanics. Stride frequency
(the time required to complete a running stride) is a function of leg length, genetic
factors and training.
The most effective way to increase running speed is to increase stride length while
maintaining frequency and efficient running mechanics. Other variables being equal, a
one inch increase in stride length would result in a gain of four feet in a 100-meter race!
Forward lean while running is a product of shifting the center of mass through
acceleration. A runner is generally able to accelerate at full effort for about six seconds.
At that point, acquired speed and the decreased efficiency of muscular contractions
stop the runner from accelerating further. From that point on, gradual deceleration
occurs.
APPLYING BIOMECHANICS TO THE JUMPING EVENTS
As stated earlier, it is crucial for the coach to understand that once in the air, a
jumper’s center of mass follows a predetermined parabolic curve. No action by the
jumper in the air will affect the path of his or her center of mass. The length or height
of the jump, however, can be improved by adjusting the body’s position relative to the
center of mass.
The law of action-reaction dictates that arm and knee drive will increase reaction off
the ground. Arm and leg thrust creates a reaction of force to the ground that causes a
second reaction of force upward from the ground through the body.
In the long jump and triple jump, horizontal velocity, the takeoff angle and landing
efficiency are the primary determinants of performance, with horizontal velocity by
far the most influential. Horizontal velocity combined with the optimum angle of
flight dictates an approximate takeoff angle of 25-degrees in the long jump and even
less in the triple jump. The proper takeoff angle is achieved through an efficient
application of vertical velocity to the acquired horizontal velocity. Once in flight,
technique works to counteract forward rotation in the jump. A landing technique
with the head and chest dropped forward and hands thrust back will optimize the
body’s position with the legs above and forward of the center of mass.

59
C h a p t e r 3
The primary components of performance in the high jump are vertical velocity, angle
of takeoff, use of forward (or centrifugal) rotation and bar clearance efficiency. With
proper clearance technique it is actually possible for a jumper to jump very near the
height of the path of his or her center of mass.
Biomechanically, the pole vault combines aspects of both the horizontal and vertical
jumps. The vault requires great horizontal velocity that is stored into the pole and
then transferred into vertical velocity. As with the high jump, it is possible for the
vaulter to vault above the path of his or her center of mass once he or she releases the
pole.
APPLYING BIOMECHANICS TO THE THROWING EVENTS
The most influential factor in throwing performance is the speed of release of
the implement. Horizontal velocity (both linear and rotational) combines with
vertical velocity generated by arm and leg thrust to determine the flight path of the
implement.
In the throws, the aim is to accelerate the implement over the longest distance
possible, thereby resulting in the greatest attainable speed at release. This is why discus
throwers keep the discus extended from their bodies during their turns. Acceleration
of the implement is also achieved through angular velocity. The torque of the body
and the decrease in angular momentum through the pulling of the free arm both
accelerate the implement to its point of release.
The optimum angle of release in the shot put is approximately 42-degrees. The
optimum angle of release decreases as the height of release increases. A one inch
gain in release height can lead to an increased distance of nine to 15 inches. For this
reason, taller throwers are clearly at an advantage biomechanically. In the discus, the
angle of release is lower because of the aerodynamic characteristics of the implement.
Thirty-four to 40-degrees seems to be the optimum angle of release.
Universal Principles of Training
In addition to having a basic understanding of track and field biomechanics, a coach
must also understand and apply the fundamental principles that govern any type
of physical training. These principles derive from the human body’s response to
training, stress and skill acquisition. Not comprehending these basic tenents produces

60
C h a p t e r 3
misinformed training and exposes athletes to the risk of injury. The following
principles must be followed in any well-constructed athletic training program:
OVERLOAD
The most important principle of training for athletics is that of overload. It should
be the aim of coaches to improve their athletes’ levels of performance and the capacity
for work. In order to achieve this goal, a coach must cause his or her athletes to adapt
to a higher level of physical and mental performance. Overloading is the essential
mechanism, or tool, for creating this adaptation.
Any new type of training subjects the body to greater or different stress than that to
which is has become accustomed. When the load is greater than the normal level of
exertion, that load becomes a stressor and stimulates a general adaptation process
within the organism (the athlete).
This process is explained in Hans Selye’s concept of the general adaptation syndrome,
which states that all organisms respond uniformly to stress. When confronted with
a stressor, an organism will initially respond with alarm. As the stress continues, the
organism will then resist in various ways. If the resistance is positive, the organism is
said to have adapted. If, however, the resistance to the stress is negative or the stress is
unchecked, the organism will degrade into a state of exhaustion.
Selye’s Theory of General Adaptation
Stress
Stage 1: Alarm
Stage 2: Resistance Stage
Stage 3: Positive Adaptation or Negative Exhaustion
The general adaptation process causes the body to react in a predictable manner to
stress. This predictability allows coaches to plan positive adaptation to overload by
their athletes. Conversely, this process also explains the negative results that athletes
experience when overload or stress is managed improperly.
PROGRESSION AND VARIABILITY
The logical consequence of adaptation to overload is progression. As an athlete
adapts to a given training load, a progressive increase in load then becomes necessary

61
C h a p t e r 3
to continue the process of adaptation to the next level of performance. In other
words, as the system is capable of doing more, it requires progressive increases in
training load for it to be stressed into a higher level of adaptation.
For progress to be achieved, however, an accurate assessment of an athlete’s capacity
for training must be made. Athletes should be pre-tested and then periodically
reassessed in terms of the physical requirements and skills demanded by their
respective event(s). Some common measures of such testing are VO2 max, muscular
strength, muscular endurance, vertical jumping ability and flexibility. Such
information becomes the foundation upon which a coach manages the progressive
overload that improves his or her athletes. Without such knowledge, training becomes
haphazard and often results in the frustration or injury of the athlete.
There are four important measures of progressive overload: mode, frequency, intensity
and duration. Mode is the type of training undertaken (e.g., running, jumping, or
weightlifting). Frequency is the number of training units in a given time frame (i.e.,
weight training three times per week). Intensity is a measure of the degree of exertion
in training (e.g., 6x100m @ 80%). In running, training intensity is commonly mea-
sured by time per distance run. Duration is the length of time or number or
repetitions of a particular training mode (e.g., 45-minute steady-state run or
performing 10 short approach jumps). Manipulating these four parameters of training
is the essence of the coach’s role in directing the training of his or her athletes.
A corollary to the principle of progression is variability. Varying the type of training
done by the athlete spurs the adaptation. Any single type of training yields good
improvement for a period of roughly four weeks. Beyond that amount of time, results
diminish. Remember that one of the measures of overload is training mode; varying
the type of training done works to fulfill this basic principle.
SPECIFICITY
Our bodies adapt to exercise or physical stress in direct response to the nature of
the demands imposed. This phenomenon is known as the specific adaptation
to imposed demands (SAID); therefore, training needs to address the specific
requirements of an event. An athlete must train the skill or system that will be
employed in competition. Distance runners must train to raise aerobic thresholds;
jumpers must train for rhythm and explosiveness; 400m runners must train for lactate
tolerance. Moreover, athletes need to train physically and mentally for competition,

62
C h a p t e r 3
not merely conditioning. A certain amount of training must mimic the specific nature
of the competitive event. To achieve success, the coach must identify and heed the
requirements of particular events.
RECOVERY AND RESTORATION
All gains in training are achieved during periods of recovery. This fundamental fact
of athletics is probably the most ignored. Recovery and restoration of the body are
integral and active elements of training, not the absence of training. For the body
to adapt positively to the progressive overload of training, it must be able to recover
adequately from the applied stress. The mantra “no pain, no gain” all too often runs
the very thin line between maximum beneficial training and overtraining. The volume
of training is far less important than its intensity and intelligent application. Training
without proper rest yields poor results and, often, injury.
Too frequently, coaches do not understand the physiological response generated by
hard training. Generally, adequate recovery from a strenuous workout requires at
least 48 hours. In any given week, no more than two or three intense training days
are recommended. Moreover, days of total or active rest are needed to relieve the
accumulated fatigue of exercise. Without such recovery, chronic overtraining with
significant risk of injury becomes likely. Coaches often view rest as wasted time in
which they might be able to squeeze more preparation. This commonly seems to be
the case near the end of season when they should be doing just the opposite. Rest
should be greatest during the championship phase of any season.
INDIVIDUALITY
Every athlete has a different response to and capacity for training. Recognizing
individual differences and adjusting expectations when designing and applying
training programs for our athletes is exceedingly important. Size, age, strength,
training age and even emotional maturity factor into the type and amount of training
under which any athlete will thrive. At the high school level, especially, coaches often
will find that many of their most talented athletes have a limited capacity to train
hard, while less talented athletes can endure much more. While the overall design of
a training program will most likely apply to all, volume and intensity must be specific
to the individual.

63
C h a p t e r 3
Planned Performance Training
The primary purpose of training is to improve and plan the performance of the
athlete. The systematic application of skill instruction, biomechanics, and the
principles of training to the development of track and field athletes is planned
performance training.
Planned performance training seeks to achieve maximum improvement in
performance and is structured so that peak performance occurs at predetermined
moments within the competitive season. That, after all, is the point of competition.
Without such planning, the training of the athletes becomes haphazard and good
results become a matter of happenstance rather than planning and prediction.
The first requirement of successful planned training is assessment. A coach must
evaluate the athletes and their abilities, the level of competition and the time available
for training and competition. From this evaluation, the objectives and goals for
individuals and the team are defined. A set of expectations for the athletes establishes
direction and purpose for their efforts. Expectations frame the goals the coach and the
athletes will have for the season. At the same time, though, goals must be realistic and
open ended. Goals that are too grandiose only serve to discourage performance. Goals
that do not evolve inhibit the unseen abilities of the athlete. Goals are most often
achieved when accompanied by the true expectation of success.
The second element of planned performance training is planning. The coach needs
to create an overall plan for training the team and individuals. This plan should apply
the fundamental principles of training to the expectations and goals that have been
defined. If anything, this basic plan constitutes the foundation upon which the coach
creates the structure of competitive success. Coaching without a plan for the season or
phase of training is like navigating unfamiliar territory without a map.
Too often athletes are kept ignorant of the course of their training. How can
they possibly prepare mentally to train with commitment if their coaches do not
demonstrate such preparation? Of course, training must be adapted to circumstance,
but without a strategy athletes are unlikely to experience success.
Once a plan is made, the construction and execution of the daily, weekly, and
cyclic training components becomes the third element of planned performance

64
C h a p t e r 3
training. This constitutes the body of the training design.
The fourth step in the process of planned performance training is evaluation.
Evaluation is not a final step, but an ongoing process that allows the coach’s strategy
to adapt to the changing demands of any training situation. Evaluation provides
measurement and feedback that allows the coach and athlete to evolve over the course
of the season.
PERIODIZATION
The integration of these four components of planned performance training with
the fundamental principles of training results in the periodization of the training
process. Periodization is the key to planned performance. It is the division of training
into distinct units that emphasize different methods and types of training. The aim
of periodization is to maximize the physical progress of the athletes and prepare them
for a concentrated period of peak competitive activity. Good periodization of training
results in good performances on the track or in the field. Devising a functioning
plan that varies the mode, volume and intensity of work in accordance with the time
available for training and competition enables positive progress to be the rule rather
than the exception.
While the concept of periodization may seem complex, it can be explained by a
simple metaphor; periodization is the recipe of training. This recipe controls the
amount of overload, its progression and variation, the specific ingredients involved,
individual tastes or differences, and the rest or settling required to produce the well-
cooked athlete rather than one who is under-prepared, overcooked or too often burned.
Types of Training
The dilemma for every coach when periodizing training is integrating the many types
of work to be done according to sound training principles in a timely and effective
manner. In doing so, dividing both the work and time into manageable units is
helpful. In track and field, the types of work can be divided into five basic categories:
running, strength and agility training, technique, drills and warm-up/flexibility
training. With the exception of warm-up/flexibility, the nature of the exercise, volume
and intensity all vary substantially throughout the course of the training year.
Running composes the bulk of most track and field training. For that reason coaches
must pay special attention to the volume and intensity of this training mode.

65
C h a p t e r 3
Strength and agility training focus on the overall development of physical capacity
and coordination skills. For the high school coach, this is an important and delicate
component of training.
Technique development concentrates on the development of the whole action of a
given event.
Drills are a subdivision of technique development. Drills develop and reinforce
individual elements of a particular technique.
Warm-up/warm-down/mobility/flexibility are those portions of training that
help athletes prepare for strenuous activity and help them recover properly after the
activity.
Dividing the Training Year
In terms of time, the training year can be divided into units that are known as cycles,
phases, or periods. The concept of a training cycle is common language in discussing
periodization. For example, a coach might consider one training year as a macro-cycle.
For the high school coach who rarely has the opportunity to train athletes year-round,
however, the year could be divided into two mega-cycles. Within these larger cycles,
microcycles approximately a month long would become the basic unit time over
which to construct a training plan.
P E R I O D I Z AT I O N O F Y E A R LY T R A I N I N G
AUG
SEPT
OCT
MAY
APR
MAR
FEB
JAN
DEC
NOV
Drills
Strength
Development
Running Intensity
Technique
Running Volume
GeneralCond.
GeneralCond.
Pre-Season
EarlySeason
Mid-Season
LateSeason

66
C h a p t e r 3
By breaking down both work and time into these manageable units, a coach can then
construct a general periodization scheme for the training year. (See chart.) By applying
the principles of training to these time and work components, the degree of emphasis
(volume and intensity) for any type of training throughout the year is determined. Of
course, the art of coaching lies in adjusting such a general outline to fit individual and
team circumstances.
SYSTEMATIC TRAINING
Training for planned performance requires a coach to integrate several types of
training. These types of training can be divided into three categories:
• General training
• Specific training
• Specialized training
General training develops the overall physical capacity and fitness of the athlete.
This encompasses basic running, weight training, plyometric exercise and rhythm
development.
Specific training has a direct correlation to the skills necessary for a given event.
Often it is a refinement of general training. Running and jumping technique drills,
specific plyometric drills, hurdling and block starts are examples of specific training.
Specialized training duplicates the exact movements and conditions of an event.
This normally involves exercises that replicate a specific feature or phase of the event.
Full jumps, time trials, strict throws and full hurdle flights are examples of specialized
training.
For several reasons, the vast majority of training for high school athletes should be
general in nature. Young athletes will benefit more from general training throughout
most of the season. Coaches should focus on developing athletes first, then event
specialists. Also, with a large number of athletes to guide, few coaches can spend the
time necessary for intensive specialized training. Finally, many athletes compete in
multiple events. General training fulfills other event demands as well as those of the
athlete's specialty.
Specific training, on the other hand, teaches an athlete a particular event. The
proportion of specific training should increase over the course of the season.

67
C h a p t e r 3
Specialized training is the refinement of learned technique. At the high school level, it
should account for a modest proportion of the total training regimen.
A system of training uses several methods and types of training within a seasonal
training cycle. The chart on this page outlines a recommended training plan.
Pre-Seasaon 2 General Training Specific Training
3 General Training Specific Training General Training
Early Season 3 Specific Training Spec./Gen. Training General Training
3 Specific Training Spec./Gen. Training General Training
Mid-Season 2 Specific Training Specific Training General Training
2 Specific Training Specific Training Specific Training
Late Season 2-4 Specific Training Specific Training General Training
W E E K S P R I M A RY E M P H A S I S S E C O N D A RY E M P H A S I S M A I N T E N A N C E
PLANNED PERFORMANCE BEYOND THE SEASON
The periodization of athletes’ training should not stop at the end of their high school
season. Some athletes may be willing and able to train in the off-season. Many will
participate in other sports. Off-season training should focus on general fitness and
skill development.
It is best for athletes to follow their competitive season with several weeks of active rest.
Then, they can begin to gradually work back into a high level of general fitness. When
good physical fitness is attained, a period of hard general training should take place.
Another rest period should follow to facilitate recovery before the next track and field
season begins. Event specific training should encompass approximately 20 percent of
the off-season training load.
The overall career of high school athletes should be planned as well. Preparing a four
year plan for a freshman athlete gives the coach and the athlete a set of goals and a
course of development to follow. It also motivates the athlete, especially one whose
initial skills or maturity are undeveloped. Such a plan will enable athletes to imagine

68
C h a p t e r 3
the athlete they can become in the future. Once an athlete sees the long range plan,
he or she might be willing to sacrifice some immediate success for the benefit of his or
her greater performance in later years.
Integrating Skill and Fitness Training
A general rule of coaching is that when an athlete trains for technique he or she
doesn’t emphasize fitness, and when an athlete trains for fitness he or she doesn't
emphasize technique.
In other words, when training athletes for technique, begin by emphasizing correct
execution, not speed of execution, and allow for sufficient recovery between each
trial or repetition. In coaching technical events (in particular the jumps, throws
and hurdles) there is a tendency to spend most of the training time on improving
skills; however, an athlete’s level of fitness severely limits the amount of technique
training he or she can accomplish before succumbing to fatigue, so every event must
incorporate endurance, strength and stamina training.
All track and field athletes need to do some aerobic running to enhance both their
capacity to train and their ability to recover from training. All runners and jumpers
need to do some repetition training to enhance their running economy, and all
runners need to do some high-lactate training (in the form of hills and interval
training) to enhance their lactate tolerance and anaerobic thresholds.
SUMMARY
• Do skill training (drills) before you do fitness training in your daily workout plan.
• In early season use a 60:40 ratio of conditioning to skill training.
• In midseason use a 40:60 ratio of conditioning to skill training.
• In late season use a 20:80 ratio of conditioning to skill training.
Warm-Up, Warm-Down and Stretching
The purpose of a warm-up is to prepare an athlete physically and mentally for a
training session or competition. Stretching is of little use if it is not done correctly.

69
C h a p t e r 3
Stretching should always be preceded by a 5-15-minute period of jogging or aerobic
exercise to allow muscles to gradually loosen and their core temperature to rise above
102-degrees.
A tight muscle is a ready target for a muscle pull or strain. Athletes should be
perspiring freely after their warm-up before they begin to stretch. Wearing a warm-up
suit will help accelerate the process of warming-up and prevent athletes from cooling
off again while they stretch.
A running warm-up should begin with easy jogging for several minutes, then
gradually increase in tempo and include some bursts of slightly faster running called
surges. Athletes will quickly become bored doing the same warm-up routine each
day, so coaches should consider using a somewhat different running warm-up prior to
each training session.
RUNNING WARM-UP EXAMPLES:
• 2000 meters (5 laps), surging the last 200m of laps 3 and 5
• 2400 meters (6 laps), surging the last 100m of laps 2, 4 and 6
• 2800 meters (7 laps), surging the last 50m of the last 5 laps
A proper warm-up for one athlete may be completely different than a proper warm-
up for another athlete, even if both athletes are training for the same event. Coaches
should have athletes try various longer and shorter warm-ups in preseason to deter-
mine what works best for each individual athlete.
ORGANIZING PRE-TRAINING WARM-UP
Young athletes must be constantly reminded that a complete workout includes a
warm-up run, stretching, acceleration sprints and a warm-down to ensure a quality
performance and reduce risk of injury. Coaches cannot expect high school athletes to
warm-up vigorously with precision, en masse, on their own without adult supervision!
The coach must lead some things that can be completed every day to be done as a
team to be a team.
The warm-up is the one part of the training session that athletes in all seven event
areas can do together. Since a team has limited daily practice time, coaches cannot
afford to spend more than 30 minutes having their athletes warm-up. Only under the

70
C h a p t e r 3
direct supervision of the the coach will the warm-up be a well-executed, quick-paced
prelude to the focus of the training session.
STRETCHING EXERCISES
After athletes are warmed up, they can begin to stretch. A stretching routine should
include exercises to develop balance, flexibility and mobility. Balance refers to the
equal function of the muscles which work in opposition to each other (e.g., the
quadriceps muscles on the top of the thigh and the hamstring muscles on the back of
the thigh). Flexibility refers to the elasticity of muscles. Mobility refers to
range-of-motion.
An effective way to motivate athletes to stretch is to convince them that stretching will
make them better athletes! Stretching gives a muscle greater elasticity, which enables
it to lengthen into a longer muscle and contract into a smaller muscle, which in
turn makes it stronger. A loose muscle is also able to relax more completely between
contractions, which enables it to be more explosive or powerful. And long muscles
enable the body’s levers to move and apply force through a wider range-of-motion.
To develop balance, an athlete must employ exercises that stretch the major muscle
groups on both the front and back of the limbs and torso. To develop flexibility, an
athlete must emphasize slow, controlled stretching called static stretching (as opposed
to bouncing, ballistic stretches). Each stretch should be sustained for a minimum of
10-30 seconds. Anything less does not allow the muscle time to relax and achieve a
full stretch. Each exercise should be performed until a slight stretching of the muscle
can be felt and then released. Each repeat of the stretch should allow a little more
movement than the previous attempt. The proper way to breathe is to exhale slowly as
the stretch is performed.
To develop mobility an athlete must do exercises which move the legs and arms
through a wide range of motion. Here is a recommended sequence of stretches.

71
C h a p t e r 3
Fig. 3-1. Toe Pointers.
Fig. 3-3. Reach Over.
Fig. 3-6. V-Stretch.
Fig. 3-8. Sit-on-Heels/Hip Bridge/Lay Back.
Fig. 3-4. Pull Forehead-to-Knees.
Fig. 3-7. Hurdler’s Stretch/Lay Back.
Fig. 3-2. Butterfly Arms-to-Toes.
Fig. 3-5. Yoga Sit.
Fig. 3-9. Figure “4”.
Fig. 3-10. Sciatic Stretch. Fig. 3-11. Abdominal Stretch.
FLEXIBILITY STRETCHES

72
C h a p t e r 3
Fig. 3-12. Hip Flexor.
Fig. 3-13. Forward-and-Back Swings. Fig. 3-14. Side Swings. Fig. 3-15. “C” Swings.
MOBILITY STRETCHES
SIMPLE RHYTHM DRILLS
Fig. 3-16. High Knees.
Fig. 3-18. Skipping Kicks.
Fig. 3-17. High Skipping.

73
C h a p t e r 3
WARMING DOWN
It is imperative that an athlete conclude each training session with a warm-down
period. The consequences of not warming down after intense exercise include severely
stiff and painfully sore muscles the next day – this is a result of the body’s cooling
rapidly after training allowing lactic acid to pool in the muscles overnight.
The purpose of a warm-down is to allow the body to gradually reduce its temperature
and respiration rate to normal. Slow jogging and walking for five to 10 minutes
allows the heart rate to decrease gradually and the muscles to disperse most of the
lactic acid that has accumulated during the workout. If the training session has been
especially intense, stretching after a warm-down jog is the best way to prevent the
muscle soreness that may result the next day. The same series of stretches used for the
warm-up can be used during the warm-down.

74
C h a p t e r 3
W A R M - U P S C R I P T
1 RUNNING WARM-UP
2 FLEXIBILITY STRETCHES
Sitting on the ground, legs extended with shoes off:
• Toe pointers (fig. 3-1) • Hurdler’s stretch/lay back (fig. 3-7)
• Butterfly ‑arms-to-toes (fig. 3-2) • Sit-on-heels/hip bridge/lay back (fig. 3-8)
• Reach over-toes/insteps/outsides • figure “4” (fig. 3-9
Of feet (fig. 3-3)
• Pull forehead-to-knees (fig. 3-4) • Sciatic stretch (fig. 3-10
• Yoga sit (fig. 3-5) • Abdominal stretch (fig. 3-11)
• V-stretch (fig. 3-6) • Hip flexor (fig. 3-12)
3 MOBILITY STRETCHES
Standing, holding onto a stationary object and swinging the outside leg up toward hip level:
• Forward-and-back swings (fig. 3-13)
• Side swings (fig. 3-14)
• “C” swings (fig. 3-15)
4 RHYTHM DRILLS
• Easy swing skipping • skipping with quick footstrike
• Fast swing skipping • jogging butt kicks
• High skipping (fig. 3-17) • High knees (fig. 3-16)
• Skipping kicks (fig. 3-18) • Fast hands/quick feet

75
4
C h a p t e r
Strength and Power Training
Strength and power are qualities that optimize athletic performance
and prevent injuries. Although not all athletes require or can handle
intensive weight lifting, all track and field athletes should engage in
some type of strength training. For high school athletes, strength
training should first concentrate on the development of basic fitness
and injury prevention. Only when these goals have been accomplished
should strength and power training be implemented to focus on
improving competitive performance.

76
C h a p t e r 4
Strength Training
Strength training is an integral component of track and field. Such training clearly
improves the basic strength, power, speed and general fitness of athletes. It also aids in
the prevention and rehabilitations of injuries when it is done properly. A philosophy
of strength training for high school track and field athletes must be based on these
fundamentals. In other words, the first goal of all training must be to improve
the health and fitness of young athletes. The second goal should be to improve
competitive performance.
Strength and weight training for high school track and field teams present unique
challenges. Weight training programs must account for a large number of athletes,
a limited number of coaches to supervise, and athletes of vastly different strength,
maturity, and needs based on their event specialties. In light of this, coaches must
construct their programs with an eye to safety, individuality and recovery. That is to
say, coaches must make sure any strength training is done safely and is appropriate
for the individual athlete. In fact, the best program for a team may not address every
specific event requirement. Strength training for high school athletes is most productive
when it focuses on the development of general physical strength and fitness.
The aim of this chapter is to provide a strength training program of practical value for
the high school track and field program. It is not intended to be a definitive treatment
of strength or weight training. The program that is suggested here should work well
for all track and field athletes.
Strength Training Principles
The universal principles of training discussed in the previous chapter must guide any
strength training program if it is to be successful.
• Progressive overload
• Specificity
• Recovery
• Variability
• Individuality
Progressive overload, or progressive resistance, is the cornerstone of strength training.
Gradual increases in the amount of repetitions completed or weight lifted stress the

77
C h a p t e r 4
body to adapt to higher levels of strength. In general, progressive increases are the
measure of increased strength.
Strength training also needs to be specific to the demands of track and field and its
individual events. As a consequence, strength training for track and field should be
aimed at increasing the overall strength, and especially, the power of the athlete.
All gains are made during periods of recovery. Without adequate rest between
workouts, the strength of the athletes will actually decrease. The process of super
compensation that produces increased strength occurs while the athlete is recovering,
not while the athlete is training.
The neuromuscular system makes its greatest changes in response to an unaccustomed
stimulus, or shock. This requires strength training incorporate a relatively large
amount of variability. Research has shown frequent variations in volume, intensity
and mode of strength training produce the greatest gains in strength.
POINT OF EMPHASIS!
At no time is there a greater range in the individual physical characteristics of
similarly aged individuals than during high school. Strength training programs
must adapt to the different capacities of individual athletes. Sometimes the
difference between the most and least mature athletes will literally be the
difference between an adult and a child. Failing to construct a strength training
program accordingly will lead to the frustration or injury of athletes.
In addition to the general principles of training that govern strength training, there
are principles specific to weight training that must be understood:
• Endurance should be developed primarily on the track. The weight room is for
strength and power development.
• Proper posture, biomechanics and technique enhance both track and field
performance and weightlifting.
• When athletes are first learning to weight train, coaches should emphasize that
repetition of movement creates rhythm and develops better technique. After
technique and rhythm are mastered, variation of the exercises keeps athletes
physically and psychologically fresh.
• Event specificity. One of the recent areas of development in weight training is the
concept of movement specificity. This, in effect, says a portion of weight training

78
C h a p t e r 4
should resemble or target the specific movements of an athlete’s event; however, the
primary goal is still to develop the general physical capacities of performance first,
and specific ones second.
In weight training, there are simple single-joint movements and more complex
multi-joint movements. The single joint movements are not technically
challenging. These include curls, leg extensions, seated presses, supine presses, etc.
More complex multi-joint exercises are power cleans, snatches, lunges, squats, etc.
The multi-joint exercises are a mix of power and balance. Throwers, jumpers and
sprinters who emphasize multi-joint movements and do little or no event specific
training in the weight room will still make significant improvement in their
individual events.
Using weighted vests or other paraphernalia for event specific exercise must
be done cautiously. Rhythm, speed of movement and technique are altered by
unnatural added weight. For a high school athlete with limited workout time, the
development of good competitive rhythm is very important. Too much emphasis
on resisted movement hinders the learning of such rhythm and technique.
Plyometric training should never be done with added weight; gravity and speed
should be the sources of overload.
• An athlete has a finite amount of training energy each day. The key to successful
strength training for track and field athletes is the careful integration of that
training energy and available time into the overall training program. Strength and
power training are important because they increase the basic physical capacity of
the athlete; however, track and field athletes are not weightlifters; they are runners,
jumpers and throwers. Weight training, running, plyometrics, jumping, throwing,
studying, work and social activities cannot all be done successfully in the same day!
Coaches should be very aware of their athletes’ total workload.
• Proper nutrition is vital for track and field athletes. Extreme workloads require
hypernutrition and proper timing of food intake. Athletes should eat healthy snacks
even during training sessions. It is best to have several small meals daily rather than
one large meal for food to be utilized optimally.
Good nutrition is essential to realizing gains made from strength training. The caloric
intake for a thrower will often be much greater than that of a sprinter or jumper.
The key measure of weight training progress is the strength-power/weight ratio.
In general, throwers are heavier than jumpers. Coaches should keep a close eye
on any weight gain by sprinters, hurdlers, or jumpers. If a sprinter is suddenly

79
C h a p t e r 4
10 pounds heavier and only 2% stronger, chances are that sprinter's performance
will not improve on the track. A potential side effect of proper weight training
and nutrition might be a couple of pounds drop in weight with a 5% increase in
strength. This usually results in a significant improvement on the track or in the
field. Knowledgeable coaches can use skin-fold calipers or hydrostatic weighing
to determine body fat percentages.This takes the guesswork out of the process;
however, a coach can usually see the results of strength training in the physique of
the athletes by simply being observant.
General Guidelines of Weightlifting Sets and Repetitions
• With machines, light sets of 10–15 repetitions strengthen joint stability, and
moderate sets of 5–10 repetitions help develop musclar gains. With free weights,
light to moderate load sets of 6–10 repetitions develop lifting technique and
harmony between the muscle groups; heavy sets of 2–6 repetitions develop general
strength and power.
• Generalized strength training with a small number of event specific exercises can
produce significant results. A large proportion of event specific strength training should
be done only by advanced athletes under the supervision of knowledgeable coaches.
Weightlifting programming is not as complicated as some coaches make it out to
be. Following or developing a basic progressive overload system will provide athletes
with a significant advantage; however, if athletes are not yet capable of modeling basic
proficiency in their chosen events, time in the weight room will not help them achieve
technical proficiency in their event. A young athlete’s time is most often better spent
learning the basic techniques of an event rather than spending additional time in the
weight room. As a general rule, the more advanced/skilled the athlete, the more impor-
tant weightlifting becomes as part of his or her training regimen.
Safety in the Weight Room
If proper care is not exercised, the weight room has the potential to become a
dangerous area for athletes.
The coach has four primary responsibilities to ensure the safety of the athletes. The
first is to evaluate the physical condition of the athlete. The second is to properly
maintain the equipment. The third is to ensure proper lifting and exercise technique
are follwed. The fourth is to guarantee proper assistance or “spotting” for every lifter.

80
C h a p t e r 4
Physical Condition of the Athlete
Weight training, particularly with free weights, requires the coach to evaluate the
physical condition of the athlete prior to beginning any weight training program.
At the high school level, especially, coaches are faced with extreme differences in the
physical development of the athletes. This also includes, of course, the differences
between male and female athletes. A set of evaluative physical tests and a careful
developmental strength program are prerequisites to a safe and effective weight
training program. Such testing should not only be done prior to beginning any weight
training but also periodically throughout the training cycle. Weight training does
incur some degree of physical risk. Coaches must carefully supervise the physical and
technical development of their athletes. If it is determined there are athletes who are
not yet ready for the weight room, those athletes should maintain a strength training
program with bodyweight exercises (e.g. lunges, incline push-ups, assisted pull-ups,
bodyweight squats and core work) that will prepare them to eventually move to a
weightlifting program.
Condition of the Equipment
The risk of severe injury appears when equipment is not maintained or becomes
damaged. The coach in charge of the weight training facility should regularly check
cables on machines for wear and tear. The coach should also check the condition
of seat backs on leg press machines, stability of benches, condition of power racks,
positioning of free weight storage racks, condition of bars and dumbbells and the
fit of the bar collars. A clean, stable lifting surface should be used since many major
injuries occur when athletes slip on the lifting surface. Each coach should also make
sure that proper shoes are worn and lifting belts are used. Those athletes who perform
heavier lifts should not do so in running shoes; basketball, wrestling or special
weightlifting shoes are needed to provide stability. No one should be allowed into
the weight room without proper footwear. No sandals or open toed shoes should be
allowed in a weightlifting environment, even if the athlete is just sitting and watching.
Proper Weightlifting Technique
Proper technique produces better results and reduces the risk of injury to the athlete.
Even when working on machines, there is a risk of injury if leverage is not applied
properly. When handling free weights, the consistent use of sound technique is
essential, even with light weights.
The best way to make sure athletes are able to perform exercises properly is to

81
C h a p t e r 4
teach the basic movements using only a bar without any additional weights. Some
exercises such as the Olympic lifts are best introduced to athletes by having them
learn proper technique using a broom stick or a section of PVC pipe. The coach has
a responsibility to mandate technical proficiency before allowing athletes to move to
heavier weights.
To diffuse the teenage bravado commonly seen in high school weight rooms, it is
critical the coach sets an environment where everyone “checks their ego at the door
and learns to so things correctly.” Reward effort that is put towards technique and
make sure the athletes know that a properly executed 200lb. full squat is much more
impressive than a 500lb. quarter squat.
Only with proper technique can real strength gains be made.
Proper Assistance, or Spotting
Spotting is commonly used in free weight exercises such as squatting and bench
pressing. As lifts get heavier, more spotters are required to maximize safety. This helps
create a total lifting environment for the athletes – one that demands the awareness of
others’ safety at all times.
Bench Press. A minimum of one person stands behind the athlete to make sure the
lifter safely completes the lift. The spotter should use a solid grip to help guide the bar
back to the bench in case of problems. The spotter should not allow the lifter to struggle
if the bar starts to tilt to one side during the lift (this can cause rotator cuff or pectoral
tears) or if he sees extreme arching of the back (this can cause lower back injury).
For very heavy lifts, a triple spot is recommended. This includes two side spotters to
aid the spotter in the back. It is important the side spotters follow the lead of the back
spotter and all three spotters guide the bar back evenly. Injuries can happen when a
side spotter panics and lifts too aggressively, tilting the bar to one side; equally, a side
spotter who fails to lift the bar when ordered may also cause the bar to tilt.
Squats should be performed safely inside a squat rack with pins that trap the bar in
case of a failed lift. If the lift is performed outside the rack, spotters are mandated.
On light to medium lifts, one spotter is needed. The spotter stands directly behind the
lifter, ready to help in case of failure. The spotter stands with knees slightly flexed and

82
C h a p t e r 4
arms near the lifter’s torso. If the lifter fails to rise, the spotter steps in, hooks both
arms around the torso, and pulls up. This stabilizes and assists in the lift. One style of
spotting involves reaching around the torso and placing the palms of both hands on
the lifter’s pectorals. Another is to place both hands around the sides of the torso, just
above the weight belt, and lift upward. The first method, which is the strongest and
most efficient, is recommended.
For heavy lifts, three spotters are recommended. As with the bench, the side spotters
must synchronize with the back spotter for proper balance. For every lift, the lifter
must maintain consistent effort throughout. With heavy lifts, spotters alone will not
prevent a crash of the weight. The lifter must continue to push through until the weight
is racked! This is something that must not only be taught prior to any lifting but also
practiced at lighter weights by both the lifter and the spotters.
Spotters must be extremely vigilant since, if injury occurs or a lifter passes out, the
weight may be entirely in their hands! For this reason, spotting a 300-pound bench
press or a 500-pound squat can be very hazardous and must be approached with great
attention and caution.
Another very important point in weight room safety is the use of well-fitting bar
collars. The collars, if used properly, will keep the weights from slipping off the bar.
Another crucial safety measure is checking the weight on the bar. It is easy to forget
to add a plate or remove a plate from one side of the bar. The resulting imbalance can
cause serious injury.
A Note on Squatting Failure with Heavy Weight
Most athletes when squatting will eventually encounter a weight they cannot manage.
In these instances it is imperative the athlete know it is OK to drop the bar to the
floor. It is much safer to bail out of the lift and have the weights crash than to allow
the weight to compress the athlete or allow the spotter(s) to push the lifter out of
alignment in a rescue. A bent bar or loud noise is preferable to serious injury.
In the case of low repetition squatting with very heavy weight (over 350lbs) a spotter
on the athlete’s back will do more harm than good. Two side spotters are necessary
and their sole job is to remove the weight from the lifter if the bar stops traveling
upwards. If the bar stalls, they take all the weight off the squatter. Do not allow a
squatter to “push through” a stalled squat. Spotters during a maximal squat effort are

83
C h a p t e r 4
an “all or nothing” proposition. A spotter on the back of the lifter will be unable to
lift enough of the weight to be of any help and will only serve to push the squatter
out of proper lifting position.
Olympic Lifts Safety
Olympic lifts regularly demand weights be dropped to the floor and are, therefore,
only to be attempted in weight rooms with appropriate bumper plates and lifting
platforms. Olympic lifting should only be done on a solid, level platform. The lifting
platform must be clear of all observers and teammates during the lifting attempts.
When dropping the weight, the bar should be “pushed” (the lifter’s hands follow the
bar to the ground while exerting mild downward pressure) and not allowed to bounce
wildly. The athlete should not attempt to slow or resist the bar’s descent or try to
“catch” a bouncing bar.
The use of lifting chalk (magnesium carbonate) is encouraged for the Olympic lifts in
order to help the athletes grip the bar.
There is no spotting in the Olympic lifts or their derivatives. When properly taught,
the Olympic lifts and their derivatives are among the safest exercises athletes will do.
Medical Clearance. All athletes should be examined and cleared by a doctor before
undertaking a weight training program. Those with high blood pressure, congenital
back problems (bulged discs, loose ligaments), knee problems, etc., should not be
allowed to lift until those problems have been addressed.
The Strength and Weight Training Program
The following section offers a strength training program designed for track and field
athletes. The program is divided into three levels, each intended for athletes of various
maturity, strength and event specialties.
A team's actual program will be defined further by the following factors specific to a
school's situation:
• Equipment
• Weight training knowledge
• Time availability

84
C h a p t e r 4
• Number of athletes
• Staff available for supervision
• Type of athlete
• Event specialties of your athletes
The following levels outline strength training programs that range from a most basic
weight training program to an advanced training system.
LEVEL I
The Level I routine is a basic strength training circuit which targets athletes that
have little or no weight training experience or those who may be physically weak or
immature. Most distance runners would follow this type of program.
Advanced athletes may also use this type of program as a transition from off-season to
preseason training or if they are returning to strength training following an injury.
Preseason training should include three sessions weekly. During the competitive
season, young athletes competing in the throws may strength train three times per
week: however, athletes participating in the other track and field events should cut
back to two sessions.
Strength training for distance runners is strongly recommended but must be kept
in perspective. First, coaches must remember the concept of specificity. The basis of
success in the distances is aerobic fitness. Since weight training primarily develops
strength and power, it applies less specifically to distance running than to other track
and field events. Certainly, strength training will help distance runners, but its goals
should be to develop overall fitness and prevent injuries that result from weakness,
muscle imbalance, or overuse.
• Equipment: Bench for bench press, lifting bar and weights, medicine balls or
basketballs, jump ropes
• Time Required: 30 minutes to one hour
• Supervision: One or two coaches
The Level I routine begins with 4–5 minutes of easy continuous running followed
by 10 minutes of preparatory stretching. The strength/fitness circuit should take

85
C h a p t e r 4
20–40 minutes. The number of sets and repetitions vary substantially. The key point
to consider is the volume of work and its intensity must increase gradually. Athletes
should begin conservatively and progress.
The Fitness Circuit
Push-ups (Up to 5 sets of 2–10 reps with 30–60 seconds rest, depending on ability.)
Pull-ups (Up to 5 sets of 2–10 reps with 60–90 seconds rest: weaker athletes may be
assisted by partners until they gain sufficient strength.)
Lunges side and forward (up to 5 sets of 20 performed with alternating legs).
Box step-ups holding dumbbells in each hand. (Athletes should do up to 10 sets
of 5-10 reps, boxes or benches should be 6–18 in height, weight should range from
5–20 pounds depending on the athlete’s strength. Small 5 or 10 pound plates from
the weight room may be substituted for dumbbells.)
Abdominal Crunches (up to 100 in sets of 10–20). When conditioning the stomach
muscles, an athlete does not need to rise more than 30-degrees off the ground.
Beyond that point the psoas muscles do the majority of the work, placing substantial
stress on the lower spine risking injury.
Standing long jumps into sand, grass, or wrestling mats (up to 5 sets of 3 jumps
with both feet together).
Medicine ball tosses or homemade weighted balls of 3–8 pounds. Choose 2 or 3 of
the following exercises:
• Overhead toss (2–4 sets of 10)
• Forward toss (2–4 sets of 10)
• Side toss (2–4 sets of 10, each side)
• Triceps toss (2–4 sets of 5)
• Two-handed basketball pass (2–4 sets of 10)
• Straight-armed forward toss, kneeling position to partner (2–4 sets of 10)
Note: Obviously, obtaining medicine balls for as many as 100 or more athletes is
impractical. Incorporating medicine ball exercises into the circuit will reduce the
number of balls required.

86
C h a p t e r 4
The program is concluded with five minutes of easy jump rope work. Jumping rope is
an excellent way of developing rhythm and movement skills.
Sample Workout - Level I (2–3 sessions per week)
Day 1 — Jog five minutes, stretch ten minutes, push-ups, lunges, medicine ball,
curls, sit-up crunches, jump rope.
Day 2 — Jog five minutes, stretch ten minutes, pull-ups, step-ups, machine bench
press or medicine ball, sit-up crunches, jump rope.
Day 3 — Alternate between day one and day two routines.
This program may be done during a PE class or as part of track and field practice. If done
during practice, the strength training circuit should follow the event-specific workout.
LEVEL II
The Level II routine is recommended for the majority of high school track and field
athletes. This routine does not pretend to be the optimal strength training program,
but it does provide good strength and power training within the constraints faced by
most high school programs. It can accommodate a fairly large number of athletes and
requires limited equipment and supervision.
As with Level I, the Level II routine should be done two to three times per week
depending on the training phase and event specialty.
• Equipment: Level I equipment plus weight machines
• Time Required: 30 minutes–one hour
• Supervision: One or two coaches
At this level, weightlifting machines provide a number of relatively safe exercise
options; for example, bench press, leg press, lat-pulls, pull-ups, sit-ups, seated or
standing press, hamstring curls, chest flies, triceps extensions.
Using machines increases the number of athletes that can weight train safely. For
basic fitness, 10 repetitions per exercise with 30–60 seconds’ rest between sets or exercises is
recommended. The circuit can accommodate about 15 people at a time.

87
C h a p t e r 4
Sample Circuit — Level II (2–3 sessions per week)
1. Bench press 9. Step-ups
2. Incline bench 10. Side lunges
3. Leg press 11. Forward lunges
4. Seated press 12. Partner medicine ball
5. Standing press 13. Jump rope
6. Sit-ups 14. Triceps work
7. Pull-ups 15. Lat-pulls
8. Dips 16. Hamstring curls
Once good, general fitness has been attained, circuit training should give way to
specific exercises in a set pattern of training. Repetitions should then be reduced and
the weight increased. For example, an athlete sould do only six to eight exercises but
use three to four sets of five to eight repetitions for each.
A coach must realize that such training requires attentive planning and execution to
be effective. Weight room training poses special problems for large track and field
squads. Coaches need to plan and direct their athletes on proper technique when
lifting, paths to follow between stations, and proper places to rest when not lifting.
With the incorporation of weightlifting, safety considerations become more
important. Caution: Lifting too much weight too soon and/or improper
technique will likely lead to injuries, especially back problems.
• Don’t let athletes arch their backs while doing the bench press.
• Don’t try to maximize results in the leg press.
LEVEL III (2–3 sessions per week)
The Level III program is designed for athletes who have become proficient at Levels
I and II and who participate in events where power is an essential component of
successful performance. Throwers, jumpers and sprinters will benefit most from the
intensive strength and power development of this program.
Although weight training of this sophistication is often broken down into four or
five sessions per week, such a schedule is very rarely feasible for high school athletes.
Available time, competition schedules, supervision and multiple event demands limit
the amount of training athletes and coaches can accomplish. When one imagines a

88
C h a p t e r 4
situation of two or three coaches with 100 or more athletes competing twice a week
in various events, the limitations become obvious. For such reasons, this program is
designed for two or three lifting sessions per week.
This routine does encompass a number of advanced lifts which may present a risk
of injury, so correct technique becomes essential. Serious injuries can result from
improper lifting, inattention, or carelessness.
Qualified supervision is an absolute requirement. If a coach does not have
sufficient weight training knowledge to teach these lifts, then that coach should
wait until he or she has received proper training, find a qualified strength coach
to teach and supervise the athletes, or eliminate the lifts completely!
Athletes must understand that strength training at this level must be taken seriously.
There is no room for casual attitudes and horseplay. Focus, discipline and intensity are
the keys to advanced weight training success.
This program may not be appropriate for all athletes. Both physical and emotional
maturity are prerequisites to intensive weight training. Basic strength, flexibility and
coordination should be well-developed before beginning this type of training. Younger
athletes can still realize substantial benefits from the Level I and II routines. Older
athletes without the proper attitude don’t belong with this group either.
• Equipment: Levels I and II equipment, plus weightlifting platforms or matted
surfaces, power racks, Olympic lifting bars, incline/decline benches, dumbbells,
bumper plates
• Time Required: 45–90 minutes per session
• Supervision: One coach per 10 athletes
The coach must understand the proper technique for the following lifts:
• Power cleans*
• Snatch*
• Back squats*
• Bench press*
• Front squats
• Shrugs
• Pulls

89
C h a p t e r 4
• Dead lifts
• Good mornings
• Clean-and-jerk
• Jerks from the rack (both front and back)
• Seated and standing press (front and back)
• Incline bench press
• Decline bench press
• Front and side lunges
Not all of these lifts are done at every session. A single lifting session would include
only a small number (approx. 3–5) of the above lifts. The core lifts of this program
are marked by asterisks; they should be the foundation of any advanced routine.
A number of secondary lifts should be done as well. These lifts should address specific
weaknesses or muscle imbalances in each athlete and should also be done to reduce
the possibility of injury. Hamstring curls are especially recommended for all track
and field athletes. Other lifts include terminal quadriceps extensions, lat-pulls, triceps
extensions, good mornings, etc. Abdominal exercise should always be part of any
strength training regimen.
Athough calf raises are traditionally a staple of most workout routines, the amount of
running and jumping done by track and field athletes creates a tremendous amount
of work for the lower leg. Calf raises have a tendency to overstress the calves, making
recovery between workouts difficult. If any lower leg strengthening is to be done, it
should focus on the small muscles of the ankle and anterior tibialis (front of the lower
leg). These exercises provide greater leg stability and lessen the tendency to develop
shinsplints – the bane of many coaches’ existence.
Periodizing Weight Training
A basic routine for coaches who only have six to 12 weeks to work with athletes
should begin with the following:
Day 1 — Power clean, bench press, lat pulls
Day 2 — Snatch, back squat, incline bench
Day 3 — Power clean, bench press, front squat
The program is divided into three phases.
For the first third of the cycle (i.e., for someone available for nine weeks this would
encompass three weeks), volume and intensity are six sets of six at about 60%–70% of

90
C h a p t e r 4
maximum effort for that specific lift.
The second third of the program is two sets of six, two sets of five, two sets of four
per workout at 65%–75% of maximum effort.
The third phase of the program is one set of five, two sets of four, two sets of three,
one set of two per workout starting at 65% and ending the phase at 90%–95% of
maximum effort for that specific lift.
This program is for athletes who have already proven themselves at Levels I and II.
Rather than sacrifice technique at this point, athletes should stay with five to six
repetitions at 60% to 65% of maximum effort until the athlete has mastered proper
lifting technique.
Recovery intervals between sets during the workout must be controlled just as they
would be with repetition track workouts. Athletes should be given time to lower their
heart rates to a level that allows them to continue the workout properly. With the core
lifts, the usual rest between sets is two to four minutes, depending on the workload;
therefore, a workout of five sets of five repetitions of cleans should last about 30
minutes (e.g., ten minutes warm-up, one minute for each set, two to four minutes for
recovery between sets).
Secondary or assistance lifts should be done only if there is enough time after the
core lifts are completed. These lifts include, but are not limited to, hamstrings
curls, quadriceps extensions, calf raises, side sweeps, lat-pulls, lateral cable exercises,
rowing exercises, preacher curls, strict curls, seated press, decline bench press, triceps
extensions and good mornings.
If a coach has only five weeks or less to work with an athlete, a lifting program is
not recommended. Too much general soreness accompanies the first three weeks of
weight training. A rest of 7–10 days before the most important meet of the year is
recommended. Refer to Chapter Three to help with the periodization of training
based on a full season.
With a program lasting 12 weeks or longer, jumpers and sprinters should take two to
four days rest from the weights before a major invitational or league meet and 10–14
days’ rest from any hard weights before section or state champoinship meets. If, after
8–10 weeks of weightlifting, the athlete is no longer seeing improvment on the track
or field, the workouts should be tapered.

91
C h a p t e r 4
With athletes in all events, weight training should cease as early as 3–4 weeks before
the final championship meet.
Throwers, 400 meter sprinters, triple jumpers and pole vaulters usually continue to
improve during an intensive weight training period or cycle. These event areas rely a
good deal on muscular power; therefore, as fitness improves through weight training
performance improves as well; however, peak performance cannot be expected until
intensive weight training is stopped and the athlete has fully recovered.
Sprinters, hurdlers and jumpers need to be relatively fresh to perform well. As the
season advances, it is wise to back off intense weight training and intensify the
running and plyometric training.
As a general rule, once basic fitness has been achieved, a strength training program
should emphasize intensity over volume. Intensity, however, must be followed by
adequate recovery in order to see appropriate increases in performances on the track.
Recovery is part of the training process, not the absence of training.
In the rare case where a coach can engage an athlete in a year-round program, modified
periodization schedules should be applied; however, all programs should incorporate a
cycle of six to ten weeks of high-volume/low-intensity training if possible.
Following a basic fitness cycle, a coach has the option of different methods:
• The loading-unloading method an athlete trains at high intensity/low volume
for two or three weeks followed by one-week of low intensity/low volume (this is
referred to as an unloading week).
• A five week pyramid cycle – increasing loads followed by one week of rest from
weightlifting. (This method works well after the base period.)
Week 1 — 5 sets of 5
The first cycle is then followed by another identical cycle of five weeks. The only
difference is greater amounts of weight are lifted over the previous cycle. If this
method is used during the season, sprinters and jumpers should greatly reduce their
weight training after the second cycle. Throwers can do a couple of two or three week

92
C h a p t e r 4
pyramid cycles of high intensity and low volume.
Strength Training for Large Track AND Field Teams
Some coaches consider organizing strength training for their entire team almost an
impossible task. The number of athletes and event specialties make the planning of
strength training a complicated task. This is especially true in the case of programs
that have as many as 300 athletes in a combined girls’ and boys’ team. In such a
situation, it is nearly impossible to arrange weight training for the entire team at one
time. Creative thinking becomes necessary.
The first limitation a coach needs to address is the capacity of the weight room. A weight
room with two or three Olympic bars, a single set of dumbbells and some type of weight
machine may likely handle approximately 25 athletes-that is not a large number.
One solution to solving the problem of so many athletes and so little equipment is
to create a strength circuit that does not require use of the weight room. The Level I
routine can be done entirely on a field or in a large multi-purpose room. This should
cover the strength training needs of all your distance runners and least mature athletes.
A second potential solution is to have your throwers use the limited weight training
facilities early on non-throwing days. This would allow them do the heavier lifting
they need without interference from the other members of the team; consequently,
it also frees up the weight room for the jumpers and sprinters to use following their
primary training on the track.
A third solution is to alternate the days on which different event training groups
use the weight room. This can be complicated since most track athletes compete in
multiple events.
Morning sessions are another potential solution; however, the desire to get athletes
into the weight room shouldn’t supercede or encumber the athlete’s’ ability to
complete the primary workouts for that day on the track. Athletes should not be
exhausted prior to their more important track sessions, especially in technique events
such as the pole vault or high jump.
Anything a coach can do to break up the team into groups for strength training will

93
C h a p t e r 4
help. Some additional suggestions might be to prioritize event groups and individuals
for access to the weight room. Generally, throwers should receive preference, followed
by jumpers, vaulters, sprinters/hurdlers and, finally, distance runners.
Another important consideration is the problem of adequate supervision. It may be
best to assign an assistant coach whose primary responsibility is to oversee strength
training and supervise all weight room activities.
The Lifts
The Squat
No lower body lift has more of a dramatic effect on speed and power than the squat
(Fig. 4-1). It can also be the most dangerous lift if proper preparation and technique
are not used; however, if properly executed the squat can be quite safe.
To introduce the squat to athletes, begin with light weights to help develop proper
technique and to help the athlete learn the balance that is required for safe lifting.
The athlete should start with what is known as high bar squatting. That is, the bar
should rest on the trapezius muscles about two inches below the neck. (The more
advanced low bar placement used by powerlifters should be reserved only for very
advanced athletes, not high school lifters. In that style, the bar is placed four to
six inches below the neck. It requires a very strong back and well-developed squat
technique. When beginners try to lift in this position, they tend to lean too far
forward and lose their balance.)
Fig. 4-1. The Squat.

94
C h a p t e r 4
With the bar on the trapezius and the hands spaced evenly on the bar several inches
outside the shoulders, the athlete lifts the bar off the supporting pins of the squat rack
and steps back to the starting position.
The initial stance can be adjusted according to the muscles targeted and the flexibility
of the athlete. If the lifter has poor flexibility, then a base four to six inches wider
than shoulder width will yield the best results. Place the feet with the toes pointing
out 20- to 45-degrees, depending on body-type. Make sure the heels stay in contact
with the ground at all times. Not only should the heels be on the ground but the bulk
of the weight should be felt there. In a properly executed squat, the athlete should
actually be able to wiggle his or her toes throughout the lift. If the weight of the lifter
rolls forward onto the toes, the toes will stop wiggling and the lift is no longer being
performed efficiently. Squatting correctly requires great flexibility in the ankle, knee
and hip joints.
The key to the squat is to keeping a tight torso and a straight back while lowering the
bar under control. While the athlete descends, he or she should maintain his weight
on his or her heels. Pushing the chest and stomach out will compress the lower back.
This is referred to as keeping the torso tight and helps protect the lower back from
injury. The athlete should focus on using the gluteals and the hamstrings to control
the pace of the descent.
A parallel squat is attained when the upper thigh/femur, line from knee to hip, is
parallel to the ground.
A full squat is attained when the buttocks drop past the parallel level and the hips
roll under. At the point where the hips roll under, much of the weight of the squat is
transferred from the quadriceps onto the more powerful and capable muscles of the
buttocks, hamstrings and hip flexors. If the athlete is not on his heels, this transition
from parallel to full squat cannot take place.
As the lifter completes the descent, he or she keeps the torso tight and pushes back
up to the starting position. The knees should not be allowed to turn inward at the
bottom of the lift. The knees should stay over the toes at the bottom of the squat.
The eyes should look straight ahead during the entire lift. Many athletes tend to look

95
C h a p t e r 4
at the floor which causes them to lean forward excessively.
Also, both feet should be spaced evenly and in line with the body. Some beginners
tend to place one foot forward or back.
When returning the bar to the rack, the athlete should not rush back or catch his or
her hands on the supports. This is a dangerous time because of fatigue. Mistakes can
take place easily.
Caution:
Don’t force a full squat on those athletes who may have poor flexibility or poor
balance; furthermore, don’t allow those same athletes to attempt to lift more weight
until they have developed proper technique.
For track and field athletes, a properly executed full squat with light weight is much
more valuable than a heavy partial or parallel squat where only the quadriceps are
recruited/innervated to move the weight.
Caution:
If the lifter’s heels lose contact with the ground while he or she islowering the
bar, the exercise is being done incorrectly, endangering the lifter’s knees.
If a wide base and supports don’t prevent athletes from leaning forward, have them
do stretching exercises and squats without weights and until they can lift correctly.
For some athletes, a half or three-quarter squat may be more appropriate until they
achieve the skill and flexibility to go to a full squat. Never encourage increased
poundage at the expense of good technique. This will only lead to muscle imbalances
and injury. Reward technique, not tonnage!
The front squat, which develops the quadricep muscles more than a back squat is
performed in the same manner as the back squat, except the bar is held in front of
the lifter much like the catch position in the Olympic lifts. The bar rests along the
clavicles in the grooves that are created by the anterior deltoids when the arms are
extended straight in front of the lifter. Elbows are held high away from the torso or
the arms can cross over each other in an attempt to control the bar.

96
C h a p t e r 4
The Power Clean
The power clean is divided into three active phases and two recovery phases (Fig. 4-2).
Phase I is the starting position. First, the lifter stands with feet flat, slightly less than
shoulder width apart, and the bar about three to four inches over the shoes. The hands
grip the bar evenly spaced one to two inches outside the legs. The wrists rotate inward
and both elbows lock, pointing sideways. The back should be straight, with the torso
arched slightly and the shoulders back. The chest should be a few inches in front of the
bar so the back assumes a 45-degree angle to the floor. At this point, the hips should
be a little higher than the knees, with the eyes focused straight ahead, not up.
Phase II is the pull to the knees. This is where most athletes make the mistake of
overworking the lift and they lose proper technique. The weight should be moved by
using the large muscle groups, not the arms. The bar is lifted by straightening the legs
and lifting the hips. The lifter must keep the chest over the bar. The initial movement
to clear the knees will shift the center of gravity from over the balls of the feet to over
the center of the feet. Curling the wrists inward as much as possible keeps the bar as
close as possible to the shins and the lower thigh. At no point during this phase are
the elbows to bend. The arms are to remain locked with the back as tight and straight
as possible.
Phase III is the acceleration. The hips are driven forward forcefully and the torso is
driven back and up. This movement allows the large muscle groups to act upon the
bar, creating great acceleration. As the hips drive forward, the weight shifts to the
balls of the feet and the athlete tries to get as tall as possible. A quick way for a coach
to spot a major error is to see if the athlete stays flat-footed (Fig. 4-3). The athlete
Fig. 4-2. The Power Clean.

97
C h a p t e r 4
should actually rise onto the balls of the feet. If the lift is executed properly, the bar
will make hard contact with the mid-thigh. As the bar travels upward, the trapezius
muscles contract forcefully in a shrugging motion. Raising the elbows as close to
shoulder level as possible creates the final pull on the bar. It is important not to pull
back with the elbows but to point them away from the body (Fig. 4-4).
Phase IV is the recovery. When the bar reaches its highest point, a slight flexing of
the hips and knees will act as a shock absorber upon completion of the lift. The bar is
trapped as the elbows go from the side to the front of the body. The upper arms must
be held parallel to the ground. Most beginners catch the bar with the elbows close to
the torso. The final resting place for the bar is along the clavicles, with pressure from
the high elbow position keeping the bar in place.
It is a dangerous mistake to bend backward in order to catch the bar (Fig. 4-5).
The bar should be caught with the torso erect.
Another error inexperienced lifters may make is jumping or throwing the body
unevenly in order to make the lift. The feet can move a few inches to either side but
not forward or backward. In general, the feet should stay where they begin.
During the fifth phase (Phase V), the weight returns to the starting position. Here,
cleans become a problem for weight rooms without bumper plates or padded surfaces.
The bar can be lowered safely to the floor if done in stages. While keeping the torso
tight, the bar is lowered from the rack position on the chest to the hip area. Then
the bar is lowered slowly along the thigh and eventually to the floor. The back must
remain straight using flexed legs to prevent straining the lower back.
Fig. 4-3. The athlete should
not muscle the bar up by
keeping the feet flat and pull-
ing just with the arms.
Fig. 4-4. During the pull, the
athlete should not pull with
the arms before extending the
body.
Fig. 4-5. The athlete should
not swing the bar out and up
while bending the body back-
ward.

98
C h a p t e r 4
The rhythm of the lift is very important. Movement should be slow to fast,
depending on the physical skill of the lifter. If an athlete rips the weight off the floor
as fast as possible, lower back problems usually result from the premature use of the
arms and shoulders. The lifter should never struggle for control at the end of the lift.
Coaches should reduce the amount of weight if this appears to be occuring.
Flexibility of the ankles, hips, shoulders and wrists is a major factor affecting technical
proficiency. If an athlete is inflexible in these areas, a remedial stretching routine must
be undertaken. Meanwhile, only light weights should be lifted until the coach sees an
improvement in flexibility.
Flexibility Problems
• Poor Ankle Flexibility: The athlete is not able to keep his or her heels on the
ground in the basic starting position. Remedies include adding an extension to the
heel of the lifting shoes, doing dead lifts to gradually stretch the ankles and lower
calves, and to complete a general stretching routine daily.
• Poor Wrist Flexibility: This is a real problem when it comes to catching the bar at
the end of the clean or front squat. The athlete will be unable to hold on to the bar
with elbows high and away from the torso. A good exercise to begin to remedy this
problem is to put a bar on a squat rack at shoulder level and have the athlete rotate
the elbows up while keeping a good grip on the bar. This is also a good warm-up
before lifting. As flexibility improves, the athlete can roll the bar toward the end of
the fingers at the end of the catch in order to relieve the pressure on the wrists.
Snatch
(Please refer to the section on the Clean, as needed.)
Phase I is identical to the power clean (Fig. 4-6) except for the placement of the
hands on the bar. In this lift, the athlete grips the bar wide enough so the bar rests at
approximately hip height in the standing position. The bar is lifted off the ground in
the same manner as the clean, using the large muscles of the legs and torso. The arms
should be straight.
Phase II is the pull from the knees to the hips (Fig. 4-7). This is performed just as in
Phase II of the clean. The difference is that with the narrow grip of the clean, the bar

99
C h a p t e r 4
ends up at mid-thigh. With the snatch, the bar should end up at or near the hips.
Phase III is the acceleration (Fig. 4-8). (Also refer to the description of the clean.)
Thrusting the hips forward and up is essential. Too much lifting with the torso places
stress on the back and destroys balance. This will also put the bar dangerously in front
or in back of the body as the arms lock out at the top.
Phase IV is the active shrug of the shoulders and explosive rotation of the elbows as
the bar is moved overhead in one motion (Fig. 4-9). Here, the athlete must keep the
wrists firm with the backs of the hands facing the ceiling. At this point, the violent
forward/upward displacement of the hips, much like in a jump, moves the feet a few
inches to either side.
As the athlete throws the bar overhead, the head stays level and the eyes look straight
ahead. There should be no looking up or down. At the finish, the bar should be
directly over the heels of the lifter and the lifter's back should be erect.
One typical error inexperienced lifters make is for the bar to be caught several inches
behind the heels. This hyperextends the shoulders and can result in injury. Another
error is lifters sometimes drop their head. This pushes the bar in front of the body
and pulls the lifter forward. Coaches should teach their athletes to escape a poor lift
by pushing off the bar so the athlete goes forward while the bar drops behind the
athlete. Failed lifts are why bumper plates or rubber matting are needed to prevent
damage to the bar and weights.
Safety Considerations for Olympic Lifts
The snatch should be done only by advanced athletes with proper equipment and
direct supervision. With all Olympic lifts, there is the chance of teammates being
Fig. 4-6. Phase I. Fig. 4-7. Phase II. Fig. 4-8. Phase III. Fig. 4-9. Phase IV.

100
C h a p t e r 4
injured if a bar is dropped.
Caution:
Coaches should never let anyone sit anywhere near the lifter.
Also, good traction is very important for all lifts. The best surfaces on which to lift
are plywood platforms (do not paint or varnish the wood), rubber flooring (single
unit flooring prevents a lifter from catching a foot on the seams) and non-slip surfaces
on concrete. Avoid smooth concrete, waxed floors, slick carpeting, wet or uneven
surfaces. Make sure there is room to escape a bad lift so the athlete does not crash
into the wall, benches, or racks. Always keep loose weights, bars, medicine balls, etc.,
out of the active lifting area.
Shoes should have good support. Athletes should never lift with sandals or in bare
feet. A slightly raised heel is preferred. It is advisable that lifters either use gloves or
chalk up the grip areas. Rough bars can abrade the skin on the hands very quickly.
Because of the impact on the thighs and hips, it is also recommended lifters wear
sweat pants or tights.
An Olympic type bar in good condition is to be used for these lifts. These bars have
revolving sleeves which allow the bar to rotate and will not cause injury to the wrists.
A good weightlifting belt is mandatory to protect the lower back of the athlete. Belts
are sold in most sporting goods and weightlifting stores.
If a school does not have the proper equipment and space to perform the Olympic
lifts safely and correctly, they should not be included in the program. While these
lifts are the cornerstone of the training of nearly all elite athletes, the athletic power
gains made by doing these lifts in less than ideal conditions can often be matched or
exceeded by a well planned and executed plyometric program.
The Bench Press
Perhaps no lift is as popular with high school athletes, and gives less in return
athletically, than the supine bench press. With the exception of the shot putters and
discus throwers, the bench press can be considered an auxiliary lift for all other track
and field athletes.

101
C h a p t e r 4
The supine bench press (Fig. 4-10) develops the chest and arms noticeably, which
appeals to the vanity of young athletes. There is a definite need for upper body
strength in most sports, but lower body and back strength are far more important for
performance.
To perform the lift, the athlete lies on the back with each foot spaced about twelve
inches from the side of the bench. The feet maintain contact with the ground by
having the heels touching. The head rests on the bench with the nose and eyes
directly below the bar. The lifter grips the bar outside the width of the shoulders. The
width of the grip is determined by mechanics, comfort and arm length. Most bars will
have knurled markings to ensure a symmetrical grip.
After a couple deep breaths, the lifter inhales and pushes the bar up from the bench
supports. (Sometimes a spotter helps to pick up the bar, depending on the amount of
weight and bench construction.) With the arms fully extended, the athlete stabilizes
the bar before attempting the lift.
When the lifter is ready, the eccentric, or descending, phase of the lift begins.
Lowering the weight should be done under control with no sudden surges in speed.
The bar is lowered to the bottom of the pectorals until it touches the chest. The
weight should always be controlled and should not bounce off the chest.
The next step is the drive off the chest (concentric, or ascending, phase). The lifter
pushes the bar up in a slight arch toward the upper chest. This keeps the elbows in
line with the direction of force on the bar.
When the repetition is complete (elbows locked and the bar stabilized), the next
repetition is attempted.
During the push off the chest, the lifter should make sure the buttocks maintain
constant contact with the bench. If the lifter raises the buttocks to finish the lift,
lower the weight and maintain proper technique.
Fig. 4-10. The Bench Press.

102
C h a p t e r 4
To isolate different areas of the upper body, narrow or widen the grip. Wide grip
bench presses emphasize the pectorals and lats. Narrow grip bench presses isolate the
arms and work the triceps and forearms.
Incline bench presses allow less weight to be lifted and, furthermore, are more
difficult to spot. Nonetheless, this lift is important to develop upper body strength
and stabilize the shoulders. With the incline press (usually a 45-degree angle), the
lifter performs the same routine as with the supine bench press. From the lock-out
position, the bar is lowered to the upper pectoral, one to two inches from the clavicle.
The bar is driven up keeping it between the elbows and the chest. One of the big
errors made by beginners is pushing the bar out from the chest instead of up toward
the chin. This can cause the lifter to lose control of the weight. As with the flat bench
press, the feet should be flat on the ground with the buttocks maintaining contact
with the bench at all times.
Technical Appendix
The following drawings illustrate several of the most common errors made by athletes
while performing the core lifts. These drawings should be used as a guide to teaching
sound fundamental lifting technique.
Common Questions
Should my athletes use machines or free weights?
Free weights will create more balance and coordination in the musculature. For
most track and field athletes, free weights are a superior choice; however, certain
movements are better accomplished on machines. The pulling movements such as
rows and lat pulls lend themselves particularly well to machines. Machines are also
great for circuit type training and for beginners.
When should I use barbells vs. dumbbells?
Barbells are used for the “large” lifting movements i.e. squat, supine bench, incline
bench, military press, upright rows etc. Dumbbell training for these movements
allows for a much larger range of motion and will demand all of the stabilizing
muscles within a joint be recruited. Dumbbells are a great way to mix up a training
regimen and increase the variety of workout possibilities.

103
C h a p t e r 4
I don’t have access to a weight room, how can I get a lifting workout done?
Bodyweight exercises, also known as gymnastics, offer a great alternative to a formal
weight room.
In addition, if you have access to medicine balls, stadium steps or a long hill, the
opportunities for strength training are nearly limitless.
Some sample exercises include:
Push-ups (on inclines, declines and level ground)
Pull-ups
Body weight squats
One-legged squats
Lunges (forwards, backwards and lateral)
Box step ups
Running/bounding stairs
Running/bounding hills

104
C h a p t e r 4
When the athlete pushes the
weight up, the hips should not be
lifted off the bench.
Make sure the heels stay in contact
with the ground at all times.
Knees should not turn inward.
The bar should not be pushed up
unevenly.
Looking at the floor can cause the
athlete to lean forward excessively.
During the entire exercise, the
body stays stationary and the legs
should not move or extend.

105
5
C h a p t e r
Plyometric Training for Speed-Strength
Traditionally, training for power has been done by training for
strength first (in the form of calisthenics and weightlifting) and then
training for speed and quickness. Although both forms of training
contribute to success in track and field, neither addresses the specific
requirement of explosiveness—the ability to combine strength and
speed. The basic principle of specificity demands that power training
incorporate elements of strength and speed simultaneously. One such
type of training, particularly well-suited to track and field is called
plyometric exercise.

106
C h a p t e r 5
A Philosophy of Plyometric Training
The goal of any athletic training program is to improve the specific physical capacities
needed for that sport. Track and field athletes need good general strength, speed, spe-
cific muscular endurance, and especially the ability to be explosive or powerful. That
is, athletes must train to exert the greatest amount of strength in the shortest time
possible. Even middle and long distance runners need to possess the ability to respond
powerfully to the demands of a given race.
Fundamentally, track and field is a sport of explosive movements. Consider the events
of the sport. All require specific skills, movements and running to be conducted in
very short moments of time. With the exception of the distance events, the events of
track and field are inherently power oriented activities.
In the 100 meters, for example, each foot contact with the ground is completed in
a fraction of a second. Even in the longer races, mid-race surges and finishing kicks
demand that athletes respond quickly and powerfully. A primary objective of training
for track and field, then, must be to develop the ability of the individual to perform
each event with the optimum degree of explosiveness.
The Physiology of Plyometric Training
The term plyometric, as derived from its Greek root, means to increase or augment.
Such training has been used systematically in track and field by European coaches and
athletes for nearly 25 years, although most American coaches consider it a recent phe-
nomenon. In fact, most athletes have been doing some form of plyometric exercise all
their lives. Jumping rope, playing hopscotch, leaping from the front porch, skipping and
bouncing are all plyometric movements. Understanding the mechanisms, techniques
and proper application of plyometric training, however, is essential for it to be properly
integrated into a system of training that will benefit the track and field athlete.
Plyometrics are exercises that aim to develop explosive ability by conditioning the
neuromuscular and elastic characteristics of the muscle. Strictly speaking, plyometric
training is a method of training as opposed to a specific set of exercises. An athlete
does a certain drill or exercise in a plyometric manner. While there are certain types
of drills and exercises that lend themselves easily to plyometric training for track and
field, the key to their usefulness lies in proper execution and application. When done

107
C h a p t e r 5
correctly, plyometrics combine strength and speed by developing the explosive, reac-
tive movements that comprise throwing, sprinting and jumping.
The main objective of plyometric training is to produce greater power by training the
muscles to contract more quickly and forcefully from an actively pre-stretched posi-
tion. The effectiveness of the exercise relies upon the conditioning of the myotatic,
or stretch-reflex, mechanism and the natural elastic properties of the muscle. Body
weight and gravity are used to load elastic tension within the muscles, which is then
released in a muscular contraction much more forceful than normal. In simpler terms,
when a muscle is stretched quickly, it tries to protect itself by contracting. This is
called an eccentric contraction: a contraction where the muscle is forced to lengthen
even though it is trying to shorten itself. (Try making a muscle with your biceps and
then pull your forearm toward the ground.) The counterpart of this is concentric
contraction, where a muscle shortens as it is contracts. This is what is usually thought
of as a muscle contraction. A concentric contraction is much stronger when it is pre-
ceded by an eccentric contraction. In an eccentric contraction, the muscle reacts very
powerfully against the rapid stretching. This reaction is the stretch-reflex.
The strength of the stretch-reflex is a consequence of how fast a muscle is stretched.
When a muscle is stretched quickly, rather than slowly, it is placed under greater ten-
sion, storing a greater amount of elastic energy within the muscle. A fundamental
principle of plyometric training is the muscle needs to be pre-stretched quickly. The
rate of stretch of the muscle is much more important than the degree of stretch. For
example, suppose athletes are doing plyometric exercises in the form of two-legged
hopping. To achieve the proper effect, the athletes should jump, land and rebound
with as little time spent on the ground as possible, as opposed to jumping, landing,
and then sinking in a full squatted position before attempting to perform the rebound
hop. When the eccentric contraction is slowed, the stretch-reflex mechanism is
negated and the exercise loses its plyometric quality. Again, the rate of stretch, not the
amount of stretch, is the key to training the muscle plyometrically.
Principles of Plyometric Training
Successfully incorporating plyometric exercises into training programs for track and
field athletes requires more than knowing how the muscle is affected during exercise.
The best results are achieved when both the coach and the athlete understand the role
of power in a respective event and how to integrate and correctly apply plyometrics

108
C h a p t e r 5
to an athlete’s overall training. Plyometric training requires the same careful attention,
application, and periodization as training for an individual event. The goal of plyo-
metric training is to develop the power and explosive ability that is the key to success
in nearly all track and field events.
In constructing a plyometric regimen, the coach must keep in mind the general and
specific principles of training. Not adhering to these basic tenets leads to poor results
and exposes the athlete to a substantial risk of injury. The universal principles of track
and field training must be followed in any plyometric program:
• Progressive overload
• Specificity
• Recovery
• Individuality
• Variability
Variation is especially important for plyometrics. Research in strength training shows
the muscular system responds best when the stimulus is varied over time. The neu-
romuscular system needs to be shocked so it will be forced into adapting. With plyo-
metrics, this means doing different types of exercises some days or varying the number
of repetitions or the intensity.
Beyond the universal principles of training, there are principles specific to plyomet-
rics. As a unique form of exercise emphasizing explosive movement from a pre-loaded
and pre-stretched position, plyometrics has its own particular set of considerations to
be followed.
Basic Strength
The overload of the muscular system by the combination of body weight and gravity
requires a basic level of strength to ensure against injury when performing explosive
movements.
Opinions vary as to the degree of strength needed. Some authorities suggest that the
most rigorous forms of plyometrics, such as depth jumps and one-legged box jumps

109
C h a p t e r 5
demand that an athlete be able to squat 150–200% of his or her body weight. The
vast majority of high school athletes would not meet this standard.
Two rules of thumb apply here. First, athletes should start with the most general and
lowest level of plyometric exercises. Low intensity and limited repetitions are sug-
gested for beginners and younger athletes. The coach must also take the athlete’s body
weight into consideration. The same drill will produce more physical stress upon the
heavier athlete than on a lighter athlete. In adolescence, strength in relation to body
weight is often poorest among those who are the heaviest. Second, if the athletes are
capable of performing the exercise explosively with correct technique, their strength
is probably adequate for the particular exercise. If they are not capable of performing
the task properly or execution breaks down after a few repetitions, then the athletes
need to develop greater basic strength before moving on to more advanced drills. This
cautionary note is especially appropriate for young athletes who are usually in a hurry
to do the most advanced work first.
The key to plyometric training is performing technically correct, explosive movement.
Doing the exercise improperly only subjects the athlete to the threat of injury.
Rapidity of Stretch
Muscle exerts maximum tension when it is stretched rapidly. Landing after a two-
legged hop produces much greater tension in the quadriceps than simply lowering
oneself into a squat from a standing position. The stretch-reflex is utilized best when
the involved muscles are stretched quickly.
Rate vs. Degree of Stretch
A corollary to the previous observation is the rate of stretch is more important than
the degree of stretch. It is better an athlete do a jumping movement in a quick, boun-
cy manner rather than slowly sinking to a low squat and then rebounding. Doing
jumps slowly is not plyometric and lessens the effect of training.
Explosive Movement
The goal of plyometric training is to increase power; therefore, the emphasis should be
on reacting explosively immediately upon contract. This is the kinetic moment that is
being trained. The execution of the exercise should be forceful, but most importantly,
done quickly. No gathering should take place before the explosive response.

110
C h a p t e r 5
Technique
With any explosive movement, proper technique maximizes improvement and reduces
the chance of injury. Sound fundamentals are especially important for younger and
less experienced athletes. Correct technique is a good indicator the athlete is not over-
stressed by the exercise.
Fatigue
Plyometrics are deceptively exhausting to the muscles. The athlete may even feel more
energetic near the end of a workout session than at the beginning. The coach must be
aware of the athlete’s fatigue. Breakdowns in technique and reduced height and dis-
tances in drills indicate fatigue. This is when the exercise or session should end.
Caution with Plyometrics
Although plyometric training is generally accepted as a valid training method, it does
have its caveats. Because of its ballistic nature, there is a risk of injury to the athlete.
Plyometrics used improperly can easily lead to injury or overtraining. A coach must
be especially attentive and careful to ensure that plyometrics are used correctly.
• A conservative approach to the use of plyometrics for high school athletes is recom-
mended. Adolescents are susceptible to a variety of injuries. Most high school stu-
dents are still growing, have softer bone structure than adult athletes, and have not
yet developed the absolute strength to handle the more advanced and demanding
plyometric drills. Coaches often design programs for their best athletes, forgetting
that the capacity of other team members is much less. Athletes will not benefit from
a regimen they are unable to handle. The age, strength, maturity and weight of the
young athlete must be considered in the construction of a plyometric program.
• Good technique and an understanding of plyometrics in general are crucial. A
coach should carefully explain the concept of plyometrics to the athletes before they
begin. Athletes should know what the plyometric exercise will do to and for their
bodies and how it will make them better athletes. A coach should then explain the
proper execution of an exercise while the coach or an experienced team member
demonstrates the exercise’s proper execution.
• Plyometric drills should always be done on a soft, level surface such as grass or pad-
ded mats. Concrete, asphalt, or the running track are poor surfaces for such train-
ing. Drills should also be done in supportive shoes with good cushioning. Track
spikes and throwing shoes should not be worn.

111
C h a p t e r 5
• Extra weight, such as ankle weights or weighted vests, should never be used. The
aim of plyometrics is to be more explosive. Gravity and speed provide the neces-
sary resistance. Adding weight ruins the plyometric effect by causing the athlete to
spend more time on the ground and converts the exercise into a form of conven-
tional strength training.
• Athletes should begin with general exercises at low intensity. Some athletes will take
a long time to move on to more advanced, specific plyometrics. Some athletes may
never get beyond the most general stage.
As a rule, depth jumps (jumps done after dropping from an elevated surface) are
discouraged for high school athletes. If any jumping is done from boxes it should be
done only at very low heights (12–18 inches) by stronger and more mature athletes.
Constructing a Plyometric Training Program
When integrating plyometrics into the overall training program, it is necessary to
assess the fitness of the individuals and the events in which they participate. The peri-
odization of plyometric training throughout the season and from year to year should
also be considered. To do this, a coach needs to understand the different types of
plyometric exercises and their specific functions.
Types of Plyometric Exercises
There are three general types of plyometric exercises: rhythm, power and speed. Each
form develops different qualities of the neuromuscular system. As such, some exercises
are better suited for different events. Conversely, some events are served well by all
three types of drills.
Rhythm Plyometrics
Rhythm plyometrics help develop the coordinated movement skills required in track
and field. Their primary purpose is to give the athlete greater kinesthetic awareness
or body sense, coordination and rhythm. They promote general athletic ability. All
track and field athletes benefit from these drills, but they are especially well-suited for
less mature athletes and those without good natural skills. For example, many young
distance runners have undeveloped strength, rhythm and coordination. For them, the
greatest contribution of plyometric drills is to increase their coordination and sense of

112
C h a p t e r 5
rhythm. Many young athletes have good ability but simply lack some basic movement
skills because they are growing rapidly.
Rhythm plyometrics are quite useful in developing correct running mechanics. More
important, these drills give the young athlete an improved sense of physical awareness
– how his or her body moves through space. This applies to all athletes. Rhythm drills
for sprinters and hurdlers are crucial to optimal success. Sprinting and hurdling are
events where speed and power are expressed through proper technique and rhythm.
Jumpers, too, need rhythm plyometrics. Jumping events involve an explosive move-
ment at the end of a controlled run-up. A smooth rhythm enables the athlete to con-
vert run-up speed into the jump. Even high school throwers need rhythm and coor-
dination. The discus is an event of smooth rhythmic motion building to an explosive
release. And shot putters need to have a sense of rhythm with the feet in order to
move across the throwing circle and land in a solid power position.
Rhythm plyometric exercises also serve as a bit of physical education. As funding
and support for physical education curricula have eroded, many young high school
athletes come to sports programs with poor coordination, movement skills and basic
strength. This fact is particularly applicable to a track and field team, which usually
has greater numbers and variety than most other school sports teams.
Rhythm plyometric drills are mostly simple movements done repeatedly. Generally,
they involve segments of the movements athletes use while running, jumping, or
throwing. Some common rhythm drills are skipping, running with high knee lift,
running butt kicks, fast feet running and cariocas. (A fuller description of these drills
and their execution appears later.) These drills develop the necessary technique and
coordination to let speed and power be expressed most efficiently.
Power Plyometrics
The primary goal of plyometric training is to increase power. The track and field ath-
letes that need to stress power development most are jumpers and throwers, so their
training should utilize a large number of plyometric drills. Throwers should use power
plyometrics for the upper body as well as the lower body.
Although athletes in all events should use power drills in their training at different
points in the season, a coach must bear in mind that power movements are physically

113
C h a p t e r 5
demanding. Sufficient rest is mandatory both within and between workouts. During
the most competitive part of the season, these exercises should be tapered down.
Power exercises for distance runners need to be closely monitored to avoid overtrain-
ing during high volume periods.
Power plyometrics emphasize the simultaneous application of maximum strength and
quickness. The focus of movement is explosiveness. When doing jump repetitions, for
example, the objective is to perform a set of jumps at high intensity, not to continue
repetitions past the point of fatigue. Although plyometric training can be used for such
purposes, the goal of power drills is not endurance. Explosiveness is greatest when the
muscle is warmed and rested. Athletes should only do a given exercise to the point
where performance declines. It is better to do an extra set of an exercise than to add
repetitions that are not done powerfully. Power plyometric drills include a variety of
jumping movements — hops, bounds, single jumps and leaps. Upper body exercises
include medicine ball throws, pendulum throws and push-ups. Depth jumps and box
jumps are advanced plyometrics, but they are risky for most high school athletes.
Speed Plyometrics
Speed plyometrics emphasize the speed component of training. The overload principle
is satisfied in the form of increased speed rather than force. In other words, movements
are performed significantly faster than normal. The objective of speed-assisted, or
overspeed, training is to force the neuromuscular system to respond more quickly to a
stimulus. The accelerated time frame of the action overloads the system, creating faster
than normal response. This training effect then carries over into increased event speed.
Speed exercises obviously apply to sprint and hurdle events. Maximizing running
speed is the key to success in these events. Jumpers, too, rely heavily on sprint speed,
most notably long jumpers and pole vaulters. Throwers benefit from speed training
through improvements in general quickness. Speed plyometrics for distance runners
are beneficial, but one should remember to coach them to be fast distance runners,
not sprinters. The focus should be running mechanics as opposed to sprint speed.
Many of these drills will be the same as those done for rhythmic development, stress-
ing maximum quickness. Fast skips, arm swings and butt kicks are a few examples.
Using Plyometrics for Power Endurance
Although the primary goal of plyometrics is to develop explosiveness, athletes also
gain by training for power-endurance. Long sprinters and those who compete in mul-

114
C h a p t e r 5
tiple events need to develop the capacity to be explosive repeatedly; furthermore, all
athletes gain from building a foundation of strength and sub-maximal power. Such
preparation prevents injuries and allows for greater intensity and quality in training.
Generally, power plyometrics should be performed with four to eight repetitions at
maximal effort. Exceeding that number diminishes the specificity of the exercise for
explosiveness. With a greater number of repetitions, however, a power-endurance
effect is achieved. It is not too unlike speed-endurance running for sprinters and mid-
dle distance runners. Where sprinters train to maintain speed over distance, athletes
can also train to be powerful over time. Repetitions from eight to 20 or more and dis-
tances from 40 to 150m fall in the endurance category.
There are other benefits gained from the use of plyometrics for power-endurance.
Multiple repetitions of low stress exercises often serve as a good introduction to plyo-
metric training. Young athletes can learn the jumping movements and techniques more
easily when they can focus solely on the movement without having to concentrate on
the explosive element. The conditioning effect of these multiple repetitions also builds
strength in athletes and prevents injury as the intensity of the exercise increases. Finally,
as a practical consideration for the high school coach, plyometrics for power-endurance
require somewhat less supervision to accommodate a fairly large team.
Description of Individual Plyometric Exercises
As with any training program, there is no single regimen of plyometric exercises that
will guarantee optimum performance from athletes. The particular exercise is often
much less important than how it is executed. In fact, many exercises can be made
plyometric. Many coaches will discover a drill that seems especially well suited to their
athletes, facilities and environment. The following listing and description of various
plyometric exercises is not intended to be all-inclusive. These drills are strongly rec-
ommended and should be more than adequate for high school athletes.
Rhythm Plyometrics Drills
• Rhythm skipping
• High knee running
• Butt kicks
• Jumping rope
• Ankle bounces
• Skipping kicks

115
C h a p t e r 5
• Running kicks
• Cariocas
• Crossover steps
• Rhythm bounds
• Rhythm jumping
• Rhythm jump run-ups
(See illustrations.)
Skipping. Skipping is the one plyometric movement that most youngsters probably
have done throughout their lives. It incorporates coordinated movement with quick-
ness and bounding. Done properly, skipping develops good running mechanics. Basic
running positions and movements are executed and exaggerated in a slower motion.
This helps the athlete gain a greater sense of correct body position and action.
As with most plyometric drills, skipping incorporates a wide range of muscle groups.
The muscles of the hips and legs do most of the work. The exercise is very effective in
developing strength in the hip flexors, ankles, buttocks, calves, hamstrings and quad-
riceps. Skipping is highly recommended as a fundamental and enduring component
of all plyometric programs. In early stages of training, skipping should account for a
large portion of the total workload. Later, it can serve as warm-up or warm-down and
to reinforce proper mechanics.
Sets and Repetitions: It is best to judge the volume of a plyometric workout by “con-
tacts” (how many times an athlete touches the ground) rather than distance. In other
words, if an athlete hops ten times—that is ten contacts regardless of the distance cov-
ered. The number of contacts, or repetitions, for a given exercise must be determined
in relation to the total workload given to the athlete. This applies to all plyometric
exercises. Guidelines for constructing a full plyometric training program will be dis-
cussed later in this chapter.
The relatively low intensity of rhythm plyometrics allows a greater number of repeti-
tions (contacts). This is particularly useful in developing the mechanics and body
awareness that track and field athletes need.
Rhythm skipping should generally be performed over distances from 70–120 meters
to develop power-endurance and strengthen the important ankle and hip flexor
muscles. The number of sets performed will vary according to the number of other

116
C h a p t e r 5
exercises to be done. The number of sets will also vary according to the abilities of the
individual athlete. For rhythm development alone, two to four sets of the above dis-
tance are recommended.
Swing Skipping. Swing skipping is a variation of rhythm skipping, the only differ-
ence being the arm movement. Instead of maintaining a running posture, the arms are
loosely extended and swung vigorously with each skip. This modification combines
relaxation with rhythm and serves as a loosening exercise in warm-ups or warm-downs.
High Knee Running. Many athletes and coaches use high knee running or run-
ning in place in their training. The drill reinforces good running form and especially
strengthens the hip flexor muscles by stressing a high knee lift action. This drill is
especially useful for sprinters and jumpers. Attention must be paid to technique.
Athletes should never be allowed to lean backwards from the waist in order to facili-
tate raising the knees. When good technique deteriorates, the exercise loses effective-
ness and should be ended.
Sets and Repetitions: For rhythm development, distances of 20–40 meters or 8–12 sec-
onds duration in two to three sets are recommended. For strength and endurance, the
drill can be done over 60–100 meters.
Butt Kicks. This exercise is also familiar to many coaches. It strengthens the ham-
string muscles and develops quickness and coordination in the recovery phase of the
running stride. The drill also requires coordinating leg action with technically correct
continuous arm motion. The exercise is extremely useful in developing coordinated
running mechanics.
Sets and Repetitions: As a rhythm drill, two to three sets of 30–50 meters are recom-
mended. A walk-back rest is usually sufficient between sets.
Ankle Bounces and Jumping Rope. Both exercises strengthen the ankles and calves.
The muscles, tendons and ligaments of the ankle are often too weak for the demands
of track and field events.
Every contact with the ground is transferred through the ankles. The ability of the ankle
and lower leg to respond quickly and strongly is crucial to optimum performance.

117
C h a p t e r 5
Sets and Repetitions: For beginners and young athletes, no more than 10 meters or 25
repetitions should be covered in one set. Over time this amount may be increased to
15–20 meters or approximately 40 repetitions. Two to three sets are recommended.
Rest should approximately be two minutes between sets.
Skipping Kicks. Skipping kicks (Fig. 5-1) add some complexity to rhythm plyometrics.
They are excellent for building coordination and rhythm. Hurdlers especially benefit
from this exercise. Skip kicks strengthen the hip flexors, quadriceps and hamstring mus-
cles. Most importantly, skip kicks develop coordination of multiple quick movements.
Sets and Repetitions: This drill can be difficult for some athletes to learn. They should
start with short distances, concentrating on proper coordination of movement. When
the athletes can do skip kicks easily, it shows they really are developing rhythm skills.
Eventually each set should cover 40–50 meters. Two to three sets are sufficient.
Hurdlers may want to include extra sets as part of their specific preparation for a
hurdle workout.
Crossover Stepping. Crossover stepping is a more advanced drill. It builds rhythm and
coordination while moving sideways. This is particularly helpful to throwers who need
to develop body awareness in multiple positions. The exercise works the muscles of the
hip and groin areas and lower legs. It is a good strengthening activity for all athletes.
Sets and Repetitions: Sets should be done over a distance of 40–50 meters. A total of
four sets is recommended, alternating the crossover leg. The athlete should maintain a
smooth, bouncy rhythm rather than emphasizing speed.
Cariocas. Cariocas (Fig. 5-2) are a more complicated form of crossover stepping.
They require a good deal of coordination and rhythm from the athlete and are excel-
lent for teaching relaxed complex movement.
Fig. 5-1. Skipping Kicks. Fig. 5-2. Cariocas.

118
C h a p t e r 5
Sets and Repetitions: Sets and distances covered should be the same as for crossover
stepping.
Rhythm Bounds. This bounding exercise of relatively low intensity emphasizes
proper rhythm and form rather than power or speed. Coaches should teach this type
of bounding before moving to power or speed bounds. The low intensity of rhythm
bounds allows for a greater number of repetitions, so younger and weaker athletes
can learn and gain strength with a far less chance of injury. Younger athletes should
become proficient in these bounds before moving on to more advanced and demand-
ing bounds and jumps. Rhythm bounds can also be used for power-endurance pur-
poses. They are an excellent form of dynamic strength training for distance runners.
Bounds develop a wide range of muscles in the legs and hips. They are quite specific
to the physical demands of track and field.
Sets and Repetitions: Beginners and less developed athletes should start with two or
three sets of approximately 50 meters. With progress, 70–100 meters can be covered.
A walk-back of the same distance or a two to three minute rest is advisable. If done
for power endurance purposes, the rest interval can be shortened a little. Coaches
should be closely monitoring to ensure that athletes maintain proper rhythm and
technique. When either starts to deteriorate, the drill should be ended.
Rhythm Run-Ups and Jumps. Rhythm run-ups and jumps are the most special-
ized of the rhythm plyometric drills. They teach the technique and rhythm required
in the jumping events. The athlete learns and reinforces the patterns and motions of
the event without the physical demands of executing a full jump. These exercises are
excellent means of teaching the younger and less developed athletes on the team.
Sets and Repetitions: With both run-ups and jumps, 5–10 repetitions with three to five
minutes rest is recommended. This is not an endurance drill. A good rest will allow
the athlete to be fresh and smooth for each repetition.
Power Plyometric Drills
A Note on Power Plyometric Drills. Power exercises are the bulk of what is
commonly called plyometrics. They involve explosive movement with high levels of
intensity and effort. When introducing power drills to athletes, the coach must take
great care to avoid injury. This is especially true with younger and less developed

119
C h a p t e r 5
athletes. Coaches should not force athletes to do power exercises they cannot
technically perform correctly.
Two general guidelines apply when determining the fitness of an athlete for a particu-
lar exercise. One, the athlete should be able to perform the drill properly as a rhythm
drill first. Two, the athlete should be able to maintain correct technique when the
drill is performed as a power exercise. Improper execution is a strong signal the athlete
is not yet prepared for a given power plyometric exercise.
Lower Body
• Double and single leg hops
• Power skipping
• Power bounds
• Hurdle hops
• Standing triple jumps
• Box jumps
• Single jumps
Double Leg Hops. The double leg hop is an excellent general plyometric exercise for
all athletes. Power and strength are developed in the muscle groups of the legs and
hips, and specifically, in the quadriceps, gluteals, hamstrings and gastrocnemius.
Slight modifications make the exercise more specific to given events. With beginning
and younger athletes, it is best to begin these hop drills by using a small hop between
each full hop. This permits the athlete to make any necessary adjustments prepara-
tory to the next full hop. Those with poorer rhythmic and power skills will find this a
helpful introduction to power plyometrics.
Sets and Repetitions: Depending on the fitness level of the athlete, two to five sets of
repetitions are recommended. When the height of the hops drops off or technique
erodes, the set or drill should be terminated. About two minutes rest between sets
should be sufficient.
Single Leg Hops. Single leg hops are identical to double leg hops except they are
done on one leg. These jumps develop leg strength with the added elements of isola-
tion and balance. They are physically demanding, however. Only athletes with good
basic strength should attempt single leg hops. It is recommended that double leg hops

120
C h a p t e r 5
be done for a condiderable period of time before an athlete attempts to try single
jumps (Fig. 5-3).
Sets and Repetitions: Because of the demanding nature of single leg jumping, fewer
repetitions and sets than double leg hops should be done. Two to three sets of 6–12
hops are recommended. Increases in intensity should be gradual.
Single Jumps. Single jumps stress maximum effort in a single repetition. They allow
the athlete to work at maximum intensity without worrying about further repetitions.
They are also a good introduction to power drills. Single jumps can be done both
for distance and height. They require athletes to concentrate on a single explosive
movement and also force them to generate power without the benefit of momentum.
Sprinters, jumpers and throwers all benefit from single jumps because they all begin
their events from stationary positions. Jumpers, while using run-ups, need the ability
to consciously explode at a precise moment. Single jumps should be done into a soft
or cushioned landing area.
Sets and Repetitions: One set of four to six jumps is recommended. Single jumps
should be done at the beginning of power plyometric work. A rest of 30–45 seconds
should be taken between jumps.
Power Skipping. Power skips are exactly what the name implies: skipping done with
a deliberate effort to be powerful off the ground. The muscle groups affected are the
same as with rhythm skipping, but the emphasis is now placed upon vigorous action.
Sets and Repetitions: As intensity increases repetitions and distances decrease. For power
skipping, two to four sets of 40–60 meters or 10–15 skips is recommended.
Fig. 5-3. Single Leg Hops.

121
C h a p t e r 5
Power Bounds. Power bounding (Fig. 5-4) is probably the most common plyometric
exercise used by track and field athletes. Bounding closely approximates the running
motion and is, therefore, specific in training explosive capacity.
With power bounds, the athlete should land relatively flat-footed. This allows a safe
and efficient leap from the same foot. Arm action should be the same as rhythm
bounds except for jumpers who may prefer to use double arm action. High jumpers
may want to accentuate the vertical component of the bound to make it more specific
to their event.
Sets and Repetitions: Power bounding loads will vary substantially depending on the
athlete’s strength, workload and time of year. The greatest volume of work should
occur in pre- and early season. Generally, 8–12 bounds or 30–50 meters at high
intensity done in two to four sets is recommended.
Standing Triple Jumps. The standing triple jump is a slightly more advanced drill for
developing power and jumping ability. The exercise also develops balance and coordi-
nation. Jumpers, specifically triple jumpers and throwers will benefit directly from this
exercise. Aside from strength development, the standing triple jump is also an excel-
lent means for testing the jumping ability of athletes.
Sets and Repetitions: The athlete should perform four to six repetitions at strong effort.
At least one minute of rest should be given between jumps.
Hurdle Hops. Hurdle hops are double leg hops done over hurdles (or similar
barriers). Such hops require a coordinated emphasis on both vertical and horizontal
jumping. This exercise is an advanced one and should be undertaken with caution
only by sufficiently prepared athletes. The drill is demanding, requiring power,
Fig. 5-4. Power Bounds.

122
C h a p t e r 5
quickness, good coordination and often some courage. It is excellent training for
advanced athletes (Fig. 5-5).
Although an advanced exercise, hurdle hops can be modified so that less capable ath-
letes are able to get similar benefits from the drill. One can turn the hurdles upside
down or use other low barriers such as cardboard boxes. However, double leg hops
should be sufficient for those not ready for hurdle barriers.
Sets and Repetitions: Four to six sets over five hurdles are recommended.
Box Jumps. Box jumps, also referred to as depth jumps, are the most advanced of
the power plyometric exercises. As a general rule, box jumps are not recommended
for high school athletes. This exercise is most strenuous, and injuries can occur quite
easily to those without proper physical and technical preparation. Box jumps are
discussed here primarily for the purpose of educating the coach. Of course, athletes
of exceptional strength and maturity do appear at the high school level, and they
may benefit from such drills. However, the coach must not assume that a highly tal-
ented individual is ready for such training. A season can be ruined quickly this way.
Furthermore, especially with high school age athletes, when one member of the team
is seen doing box drills, others who are not prepared will usually want to attempt the
same thing. For these reasons, box drills are discouraged for high school track and
field programs.
Upper Body
• Power push-ups
• Wheelbarrow walks
• Medicine ball throws
• Twist tosses
Fig. 5-5. Hurdle Hops.

123
C h a p t e r 5
Power Push-Ups. Push-ups are a common callisthenic exercise with which most peo-
ple are familiar. Push-ups strengthen a wide range of muscles in the upper body. The
power push-up is a variation of the common push-up emphasizing a strong, quick
push off the ground causing the hands to actually leave the ground after the push.
This exercise is most specific to throwers and vaulters, but helps sprinters as well.
Most high school athletes will need to perform the drill with their knees as a base
rather than their feet. Stronger athletes may work from the traditional position. The
rate of stretch is more important than the degree of stretch. The exercise should seem
almost like bouncing on the hands. The athlete should only lower him or herself to
the point where the recovery is quick and powerful.
Sets and Repetitions: Power push-ups will not usually produce the same burn sensa-
tion as common push-ups. Nonetheless, they put a great deal of stress on the muscles,
tendons and ligaments of the shoulders, elbows and wrists. Two to four sets of 8–12
repetitions is recommended.
Wheelbarrow Walks. This is a version of the same game played by children.
Nonetheless, the drill develops shoulder and arm strength along with balance and
coordination. The exercise can easily be incorporated into a team stretching or callis-
thenic session.
Sets and Repetitions: Two to four sets of 10–15 yards is sufficient.
Medicine Ball Throws. The medicine ball is a time honored device for building
dynamic upper body strength. The balls come in different weights and sizes to accom-
modate the different strength levels of athletes. In high schools where weight training
access may be limited, this type of exercise provides an excellent substitute. In fact,
medicine ball training has long been used by elite athletes in a number of sports.
Though more specific to the throws, medicine ball work will benefit athletes in any
event. Medicine ball throws (Fig. 5-6) can be done in a variety of ways. They can be
performed standing, kneeling, sitting, or even lying on one’s back. Throws can also be
preceded by a toss from another athlete, though with heavy balls take caution to avoid
injury. The two types of throws are recommended: the overhead and the push throw.
Sets and Repetitions: The volume of this drill depends on the event specialty of the ath-
lete. Throwers and pole vaulters should use medicine ball throws extensively. Others

124
C h a p t e r 5
should incorporate throws as part of general strength conditioning. For general pur-
poses, two to four total sets of 8–12 throws is good. Throwers may want to increase
the variety of throws and sets. Repetitions should not increase – this is power, not
endurance training.
Twist Tosses. These throws (Fig. 5-7) are excellent for throwers and can be done with
medicine balls or shots. They develop strength in the trunk and the shoulder muscles
that are used in rotating the body during a throw.
Sets and Repetitions: Coaches should make certain athletes start slowly with a properly
weighted ball. The ball should not be so heavy that fluid and powerful movement
is inhibited, nor so light that the trunk muscles are not worked sufficiently. Athletes
should not rush into hard throws as injury can result. Two to three sets from each side
with 6–12 repetitions is good.
Fig. 5-7.Twist Tosses.
Fig. 5-6. Medicine Ball Throws.

125
C h a p t e r 5
Speed Plyometric Drills
Speed plyometric exercises are specific to the development of speed. The overload
mechanism is not increased weight or gravity, but, rather, a shortening of the time in
which the movement occurs. Where power drills rely heavily on the strength aspect of
plyometric training, speed drills stress velocity. By doing so, the neuromuscular system
trains to perform at greater speed. Speed is the essence of track and field.
Speed-Rhythm Drills. With emphasis on quickness, several of the rhythm exercises
become speed drills. High knee running, butt kicks and skips are easily adapted. The
athletes should maintain the same posture and mechanics as with the rhythm forms of
the drills.
The high knee drill is still focused on driving the knees up but the key is increased
turnover; therefore, the knees and arms will only have a ½ to 2/3 range of motion.
Butt kicks are done the same as in the rhythm series with an emphasis on rapid turn-
over. Skips are done normally but purely for speed, not distance. In fact, these skips
will almost appear as a quick shuffle.
Sets and Repetitions: Though the number of sets remains similar to rhythm drills, the
distance shortens considerably. These exercises should be done over 10–15 meters in
two to three sets each.
Fast Hands/Quick Feet. In this drill, the aim is to move the hands and feet as fast as
possible. Technique is less important here. The idea is to turn over as rapidly as the
body allows. Little forward movement will actually occur.
Sets and Repetitions: Two to four sets of 5–10 seconds.
In-Place Arms. This is a speed-technique drill. It helps sprinters train for rapid arm
drive while maintaining good mechanics. While standing in place, the athlete drives
the arms with good sprint form as quickly as possible.
Sets and Repetitions: Two to four sets of 10 seconds.
Speed Bounding and Hopping. These speed plyometric exercises combine speed
with an element of power. Such exercises can help all athletes but especially those in

126
C h a p t e r 5
speed and power events. These bounds and hops can also be done in assisted fashion
by using some type of elastic mechanism.
Speed bounding and hopping are done in the same basic manner as power bounds
and hops; however, the emphasis is on covering the overall distance quickly rather
than achieving maximum distance in a single bound or hop. Essentially, one is per-
forming a bounding or hopping sprint. Instead of attempting to gain maximum
height or distance, the athlete aims to move as quickly as possible. To assist, the ath-
lete should visualize a kangaroo for power drills and a rabbit for speed drills.
Sets and Repetitions: For bounds, perform three to six repetitions of distances from 40
to 70 meters with good recovery. With hops, two to five sets of 10–20 meters with
rest are recommended.
Lightweight Pendulum Throws. This is a drill for throwers. Using a lightweight ball
securely suspended to create a pendulum, the thrower reacts to the ball being swung
into his hand, immediately responding with the throwing motion. The exercise helps
develop quickness in the throwing delivery, stressing hip and arm impulse.
Sets and Repetitions: Ten to 15 repetitions with 30–60 seconds’ rest are sufficient.
Downhill Running. Running on a slight downhill grade of two to three degrees is
excellent for honing sprint speed. The effect of gravity forces the neuromuscular sys-
tem to respond faster than normal. Such running is usually done at a time in the sea-
son where peak speed development is appropriate. On a slight downhill grade, 5–10
sprints of 40–80 meters are recommended. Attention should be given to proper sprint
technique. Athletes will often begin to overstride and brake their run. This should be
avoided.
Assisted Sprint Runs. Sprint-assisted training is an effective method of develop-
ing speed which lets the athlete run faster than possible under his or her own power.
Several products exist for this type of training. Usually, the athlete is attached by har-
ness or belt to a large elastic cord. Thick rubber tubing is also often used. With the
tubing stretched, the runner sprints a given distance. Tension in the mechanism pulls
the athlete faster than he or she would sprint unassisted, training the body to move at
greater speed. As with downhill running, the overload principle is satisfied by reduc-
ing the time period in which the sprinting motion must be completed. This form of

127
C h a p t e r 5
training is specific to sprinters and jumpers and not particularly recommended for
long distance runners.
Assisted sprinting should be done on the track or a good, level field. With the device
secure and at tension, the athlete performs a sprint. Proper sprinting mechanics are
essential. The tension should not be so great that the athlete loses good technique or
control or needs to brake with each stride. If he or she does so, the tension on the
pulling cable should be reduced. For best results, another athlete should run with the
tubing or cord at the same time as the first athlete sprints. Doing this allows for more
constant degree of tension throughout the drill. (For example, in a 60-meter assisted
sprint, the second athlete stands with a 20-meter cord stretched another 15–20 meters.
As the sprinter begins, the second athlete runs quickly past the 60-meter mark.)
Sets and Repetitions: In a single workout, four to six repetitions of 40–70 meters with
full recovery is recommended. This is a pure speed exercise, so the athlete should be
fresh for all repetitions of the drill.
Note: Some forms of sprint-assisted training can be dangerous, especially being
towed by a vehicle. Athletes should always have enough control over the drill
that they may stop it at any time. To do otherwise, subjects them to a significant
risk of injury.
Incorporating Plyometric Training
The key to successful use of plyometric training is a carefully planned and supervised
program that is properly integrated into the overall training. Plyometric exercise is
actually a method of training, not simply a set of drills. The way these drills are per-
formed determines their benefit to the athlete. The general and specific principles of
training mentioned earlier must guide the structure of the training. Coaches should
pay specific attention to the concepts of gradual progression, recovery and individual-
ity; furthermore, they should always be aware that they are training the capacity for
explosive power. Finally, the rate of stretch of the muscle is more important than the
degree of stretch.
Introducing Plyometrics
The foundation of any plyometric regimen is proper instruction. Coaches must
explain underlying principles and teach the methods of training correctly. Plyometric

128
C h a p t e r 5
training is not mysterious. Here are some simple guidelines:
1. Be familiar with plyometric principles.
2. Begin slowly. Rhythm drills are more easily learned for most athletes.
3. Progress gradually to avoid injury. Rhythm drills are less demanding.
4. Always emphasize quick movement off the ground. The athlete should never settle
into a jump or throw. Stress the concept of bouncing (like kangaroos and rabbits).
5. Ensure proper technique at all times. Good technical execution is a good indicator
of an athlete’s capacity for a given drill.
6. Stop a given drill or workout when fatigue becomes apparent. Plyometric exercise is
deceptively demanding. The goal is not to exhaust the athlete.
Here are a few indicators to identify performance fatigue:
• Reduced height or distance
• Reduced range of motion
• Poor upper body position (i.e., bending over)
• Loss of coordination
Volume and Intensity
A good plyometric regimen combines proper technique instruction with the appropri-
ate volume and intensity of the drills. Physical maturity, fitness, propensity to injury,
and event specialities are different for each athlete. In high school, especially, the
physical maturity of athletes varies widely. A coach could find he or she may be work-
ing with an 18-year-old senior boy while at the same time working with a 14-year-old
freshman girl in the same event. Coaches should always error on the side of caution.
The volume and intensity of a plyometric session must also be determined in light of
other training. The nature of plyometric exercises demands they be included as part
of the body of a workout, not merely as warm-up or drills. Combining a hard power
plyometric session with fast sprint repeats, for example, will most likely exhaust, over-
train, and even injure the athletes.
Periodization and event specialities also determine the volume and intensity of a
session. Volume is higher in preseason and early season training. As the season pro-
gresses, volume moderates and intensity increases. Eventually, plyometrics are sharply
reduced during the peak competitive phase of the season. This formula is shaped,

129
C h a p t e r 5
though, by event demands. Sprinters, jumpers and especially throwers will perform a
good deal more plyometric work than distance runners. Generally, two sessions per
week are recommended. In especially heavy periods of training or competition, one
session may be adequate.
Factors shaping volume and intensity in plyometrics include:
• Individual physical capacity and fitness
• Other training in a given workout
• Event differences
• Phase of training
Ranges of Volume and Intensity
So what are the ranges of volume and intensity? A plyometric session should normally
be completed in 15–30 minutes’ time, sometimes less. Sufficient volume can usually
be performed in this amount of time.
Volume is determined by the number of repetitions performed; that is, contacts with
the ground. If bounding 50 meters results in 15 bounds, that means 15 contacts. For
beginners, contacts may range from a low of 15–30 contacts. As fitness increases, 80–
100 contacts are generally performed in a power plyometric session. For endurance
purposes, 150–225 contacts is an acceptable range. Rhythm and speed plyometrics are
less easily quantified. Let time and contacts serve as a rough guide to ensure appropri-
ate workload.
Intensity is determined by the type of plyometric drill performed. Rhythm drills are
of relatively low intensity. Power and speed exercises are high intensity. At the begin-
ning of every season, a moderate introductory phase will serve as a safe means of
beginning a plyometric program. Gradually increase intensity to the athletes’ capabili-
ties and event needs. Eventually, power and speed athletes need to train at full inten-
sity to gain the most from plyometric exercise. For this reason the number of repeti-
tions in any single set or performance is relatively low for power drills. Research shows
that power output drops drastically after 8–10 repetitions. For the jumps and throws,
the goal is to maximize the application of power in a single moment. For those ath-
letes, especially, tremendous power and intensity over two to three repetitions is much
more important than possessing fair power and intensity over 10–15 repetitions.

130
C h a p t e r 5
Specificity
As a fundamental principle of athletic training, coaches must train their athletes for
particular events, helping them develop skills and capacities specific to those events.
Accordingly, plyometric regimens will differ according to event specialities; however, many
high school athletes compete in a wide range of events. For these athletes, a program of
general exercises with specificity added during peak competitive periods is suggested.
Periodization and Phase Transition
Plyometric training needs to be carefully periodized over the course of the season
(and even an athlete’s career) to achieve maximum benefit and avoid injury. The
volume (or number of contacts) and intensity needs to be monitored. Progression
from general to specific exercises occurs as fitness increases and individual event
requirements are addressed. During peak competition periods, plyometric work eases
to maximize recovery.
Perhaps the most important aspect in periodizing plyometric training is deciding
when to implement a certain type of exercise in the training program. Intense hop-
ping and bounding too early or too close to important competitions can easily ruin a
promising season.
Introducing Plyometrics
Begin each season with an easy introduction to plyometric training. Even experienced
athletes should start with general exercises using a moderate number of repetitions
performed at low intensity. In a high school program, a lot of teaching has to be done
during this phase of training. New mechanics need to be learned, and new neuromus-
cular adaptation has to occur. Many athletes will have never performed plyometric
exercises. Coaches should resist the temptation to move better athletes on to more
intense drills too soon. Doing general exercises with excellent technique and develop-
ing greater strength in tendons and ligaments is far more beneficial than rushing into
demanding drills. The teaching phase should emphasize rhythm drills. Lower intensity
and more repetitions afford a good opportunity for learning plyometric exercise with
proper technique and execution.
Plyometric work should be done after the main body of running, throwing, or jump-
ing. The athletes will be warmed up and loose, and the fatigue of plyometric training
will not compromise the event-specific portion of the workout; however, that does

131
C h a p t e r 5
not mean plyometric work should ever be done as part of a warm-down. It is part of
the training, not the end (or beginning) of it.
Teaching and General Skill Development
The introduction phase begins with two easy sessions in the first one or two weeks.
Next, athletes should progress to the same drills with slightly greater volume. As
strength and skill develop among athletes, introduce some power plyometrics. A good
place to start is with skips and bounds. When athletes have learned these properly in
rhythm form, they should begin doing drills with greater intensity, bringing in the
power component. At the end of this three to four week phase, one session should be
primarily rhythm plyometrics and the other power plyometrics. With transition to the
next phase of training, event specificity determines the nature of plyometric workouts.
General Power Development
The next phase of training is to divides the team according to event areas.
The development of specific capacities now begins. Power plyometrics are stressed in
this period. Sprinters stress power and begin to incorporate a greater percentage of
speed plyometric work near the end of the phase. Jumpers and throwers build greater
volume and intensity into the power work and move toward more event/specific
drills. Distance runners do moderate amounts of power work combined with rhythm
work accentuating fluidity and speed. Multi-event athletes should follow a course
similar to that of jumpers or sprinters. This period of development will cover two to
four weeks, or 20 percent of the season for one hard and one easy session per week.
The greatest volume will be done at this time.
Specific Power and Speed Development
The third phase of the season’s plyometric training is the most complex and intense.
All three types of drills are combined with an increase in volume and intensity. Two
strong sessions per week with at least two full days rest between them are recom-
mended. Additional sessions are likely to lead to overtraining and injury. During
this period, sprinters now integrate rhythm, power and speed plyometric exercises.
Emphasis is placed upon power development early in this phase, and then the focus
moves to speed plyometrics. Jumpers and throwers continue to stress power develop-
ment, integrating event-specific rhythm and speed drills. For these athletes, specificity
in power plyometrics is the key. By the end of this phase, intensity reaches its peak.
Athletes should aim for maximum efforts.

132
C h a p t e r 5
Distance runners should maintain a low level of power work, stressing rhythm and
speed development instead. These athletes need to train as distance runners, not
sprinters. Coaches should stress rhythm and speed, not power and speed. The inten-
sity of workouts will be moderate. This period of training will last four to five weeks,
or 30 percent of the season. Plyometric activity should be adjusted according to the
team's competition schedule.
Optimum Performance and Recovery
The fourth and last phase of plyometric training accompanies the peak competitive
portion of the season. Volume is drastically reduced, usually to one very moderate ses-
sion per week. Intensity is maintained but not to a degree that overstresses the athlete.
Optimum performance with plentiful recovery is crucial at this time. In the last week
or two before major competition, any hard plyometric work ends. Some authorities
suggest stopping all plyometric work; however, it is recommended that light plyomet-
ric activity reinforces the early training of the neuromuscular system. Drills should be
event specific with rhythm and speed as the focus. (Only jumpers and throwers need
to incorporate any power oriented activity at very low volume and moderate intensity
once per week.)
Rest and Recovery
Many coaches fail to view rest as an integral part of successful training. In a well
constructed program, rest is not the absence of training, but a component of it.
Benefiting from plyometric exercise requires a thorough understanding of this prin-
ciple. Because plyometric training is demanding and stressful, coaches should always
lean on the side of caution. Overtraining with plyometrics will leave a coach with sore
and exhausted athletes. Coaches should schedule at least 48 hours, and preferably 72
hours, between sessions. A maximum of two plyometric workouts per week are rec-
ommended, although some plyometric activity such as rhythm drills can be part of
daily workouts. As the season nears its climax, plyometric training should be curtailed.
Constructing a Single Training Session
While periodization is the strategic planning of training, constructing an individual
workout is the tactical planning. Great planning is worth little without constant
attention and adaptation by the coach. A conservative, cautious, and supervised regi-
men is the best guarantee of successful plyometric training. The best plyometric pro-
gram is one that works for the individual athlete within the context of the team’s over-

133
C h a p t e r 5
all training. Plyometrics must be balanced against the volume and intensity of run-
ning, throwing, jumping and weightlifting. There is no best single workout. Variation
and adaptation are important.
In constructing individual workouts, coaches should always be aware of the number of
contacts to be performed. This number varies according to the phase of training and
the fitness of the athlete. Coaches should not simply assume that talented athletes can
do a large volume of work without negative effects. Athletes should start with low vol-
ume and low intensity, and build accordingly. Although plyometric training is usually
done after the main body of the day’s training, this is not always so. Sometimes rhythm
and speed drills might be done before running with power work done after. Jumpers
and throwers should do any technique work before plyometrics. Often, plyometric
drills will be the main body of training for these athletes. With distance runners,
reduce the vertical component of the drills and perform bounds and hops on separate
days and vary the drills from session to session.
Usually, the first session of the training week should be the more strenuous of the
two. The second session can be less demanding. Using different drills provides vari-
ability and generates greater interest among the athletes. Coaches need to be creative
and flexible.
Within the workout athletes should do rhythm drills first followed by speed work,
and then power work. Power drills should be done last because they are the most
exhausting. There should always be sufficient rest between repetitions and sets.
Plyometric workouts should not generally be endurance workouts. The intent is to
develop explosiveness.

134
C h a p t e r 5
Event Phase I: Phase II:
TEACHING & GENERAL GENERAL POWER
SKILLS DEVELOPMENT DEVELOPMENT
(2–4 weeks) (2–4 weeks)
Sprints and Hurdles general plyometric strength
and skill development for
all athletes
Gradually build to
moderate volume
Low intensity
Increasing volume
and intensity
Composition primarily
rhythm drills
Performed after main
body of training
Jumps and Throws Same as above Rhythm drills 20%
Power drills 60%
Speed drills 20%
Middle and Long Same as above Rhythm drills 50–40%
Distance Power drills 50–50%
Speed drills 10%
Moderate volume and intensity.
Event Phase III: Phase IV:
SPECIFIC POWER AND OPTIMUM PERFORMANCE
SPEED DEVELOPMENT AND RECOVERY
(3–5 weeks) (peak competition)
Sprints and Hurdles Rhythm drills 20%
Power drills 50–20%
Speed drills 30–60%

Intensity increases
Two sessions per week

Jumps and Rhythm drills 25% Same as above
Throws Power drills 50%
Speed drills 25%
Moderate volume
High intensity
Stress event specificity.
Middle and Rhythm drills 40–60% Same as above
Long Distance Power drills 20%
Speed drills 40–20%
Moderate volume and
intensity.
PERIODIZATION OF PLYOMETRIC TRAINING FOR THE HIGH SCHOOL SEASON
Peak competition requires an
appropriate recovery period
Plyometric training reduced to once per
week with light activity on other days
Low volume
Moderate intensity
Emphasize rhythm and speed drills

135
C h a p t e r 5
Event Phase I: Phase II:
Sprints and Hurdles Rhythmskips 4x50m Swing skips 2x70m
High knees 2x20m Single leg hops 2x12
Butt kicks 2x20m Double leg hops 2x15
Skip kicks 2x25m Fast hands/feet 2x15m
Rhythm bounds 2x40m Speed skips 2x40m
Jumps and Throws same as above Power skips 2x40m
High knees 2x20m
Butt kicks 2x20m
Power bounds 2x40m
Standing TJ 5 reps
Power push-ups 3x10
Middle and same as above Swing skips 2x70m
Long Distance Ankle bounces 3x20 reps
Power bounds 3x40m
Speed skips 2x40m
Event Phase III: Phase IV:
Sprints and Hurdles Speed rhythm drills 3x20m each Rhythm skips 2x70m
Speed bounds 3x50m
Power skips 2x50m Assisted sprint runs 4x60m
Standing LJ 5 reps
Speed bounds 3x50m

Jumps and Throws Swing skips 2x50m Speed rhythm 2x20m each
Power Bounds 3x50m Power Skips 3x40m
Standing TJ 6 reps Rhythm run-ups 6 reps
Rhythm jumps 8 reps*

*Throwers substitute Medicine Ball Throws.

Middle and Swing skips 2x80m Swing skips 3x70m
Long Distance High knees 2x30m Rhythm bounds 2x50m
Butt kicks 2x30m Skip kicks 2x30m
Speed hops 3x12 reps
sample plyometric sessions by training phase

136
Injuries: Prevention and Treatment
As a high school coach, you are responsible for the physical and
emotional well-being of your athletes. You must be involved in the care
and prevention of athletes’ injuries, recognize and manage common
ailments, and provide emergency treatment when required. You also
must constantly be on the lookout for behaviors indicating any of
the many serious health problems teenagers face, including substance
abuse, teenage pregnancy, and eating disorders.
6
C h a p t e r

137
C h a p t e r 6
The Coach’s Responsibility
Among the many responsibilities of the high school coach is having a pre-determined
plan for the prevention and care of injuries suffered by your athletes. This means
taking precautions to prevent injuries, administering emergency first aid, securing
prompt professional medical assistance, and recommending subsequent professional
medical treatment or physical therapy.
To fulfill this obligation to your athletes you must be able to do the following:
• Recognize common injuries
• Know your responsibility for the management of an injury
• Provide immediate, emergency care
The following is a list of 10 questions that you should be able to answer without
hesitation. These questions will also assist you in developing a plan to handle a
medical emergency situation should one occur.
• Do you have ready access to your athletes’ medical consent cards, which provide
parental consent for treatment in case of an emergency?
• Do you keep these cards filed in your first-aid kit? Is your first-aid kit always on
hand at your practices and meets?
• Do you know what materials are contained in your first-aid kit and how to use
them? Do you have what you need?
• Are you aware of all your athletes’ pre-existing medical/physical problems such as
diabetes, epilepsy, who wears contact lenses, and who is allergic to bee stings?
• Do you have a cell phone with you at all times or do you know the location of
the nearest telephone to summon emergency medical assistance? If the phone is
in a locked room, do you have a key or know where to get one quickly? If it is a
switchboard phone, do you know how to get an outside line?
• If the nearest phone is a pay phone, do you have quarters taped to the inside of
your first-aid kit so you always have change on hand?
• If you are not in a 911 response area, do you know the phone number for the
nearest paramedics?
• Do you know the location of the nearest paramedics to your school and their
anticipated response time?

138
C h a p t e r 6
• If paramedics have to be summoned, will they find the gates to your track complex
locked? Do you have keys for those gates? Do you know where to get a key quickly?
• Do you know the location of the nearest hospital to your school? Is that the
hospital to which an ambulance will take an athlete?
The Most Common Injuries
The multi-event nature of track and field poses a particular challenge to a coach
trying to prevent and treat athletic injuries because each event presents its own
unique problems.
Heat Problems
Heat problems can be among the most devastating and serious injuries. Heat cramps,
heat exhaustion and heat stroke must be identified and treated quickly and appropriately.
It is important to understand how the body handles excess heat during exercise.
During exercise the amount of heat produced by muscular activity exceeds the amount
of heat dissipated by the body, so the body’s temperature rises. This rise in body
temperature causes increased sweating and blood flow to the skin. Heat is dissipated by
the evaporation of sweat from the skin to the cooler surrounding of the air.
When the rate at which heat is produced equals the rate at which it evaporates from
the body, the body temperature plateaus at that elevated level when the athlete
continues to exercise. Trouble begins, however, when the body produces more heat
than can be dissipated, causing the body temperature to rise to potentially dangerous
levels. High environmental temperatures and humidity increase the danger of heat
problems because they inhibit the body’s ability to reduce heat.
Heat Cramps
Prolonged heavy sweating and inadequate fluid replacement in hot weather may cause
muscle twitching, cramps and spasms in the legs or arms. Immediate treatment is to
remove the athlete from the source of heat by placing him or her in a cool, shaded place to
rest – then replace water and electrolytes.

139
C h a p t e r 6
Heat Exhaustion
As the body temperature rises, these signs indicate the possibility of heat exhaustion:
headache, light-headedness, confusion, nausea, vomiting, muscle cramps, cold
clammy skin, weak and rapid pulse. Immediate treatment is to move the athlete to a
shaded area, elevate the feet, place cold towels or ice around the neck, head and abdomen,
administer fluids as tolerated, and refer to a doctor.
Heatstroke
This is a medical emergency! Symptoms of heatstroke are a lack of perspiration, hot
and dry skin, body temperature elevated to greater than 105-degrees, chills, irrational
behavior, involuntary limb movements, seizures, cyanosis (bluish color of the skin),
vomiting. Death may occur unless emergency medical treatment is administered
at once! While waiting for an ambulance, move the athlete to a shaded area, remove
clothing and keep the skin moist, place ice on the head and neck. The hospital will
need to administer intravenous fluids.
Prevention of Heat Problems
Gradual acclimatization is the key. Most athletes will acclimatize within 5 to 15 days
of training in hot, humid weather conditions. Other suggestions:
• Warm-up in the shade when possible. Rest in the shade between events or bouts
of training.
• Wear minimal, loose-fitting clothing.
• Drink plenty of fluids during the day prior to training or competing.
Injury Classifications
There are two main classifications of athletic injuries: acute and overuse.
Acute Injuries
An acute injury is the result of a single, sudden trauma. An example of an acute
injury would be a long jumper landing with his ankle inverted (turned inward).
Overuse Injuries
An overuse injury is caused by repeated microtrauma. Each small trauma on its own
is not enough to cause an injury; however, the sum total effect results in an injury.

140
C h a p t e r 6
These injuries may become chronic. Achilles tendonitis or shinsplints are examples of
overuse injuries.
Soft Tissue Injuries
Sprains
Sprains are injuries that occur around a joint, damaging the ligaments that attach
bone to bone. Sprains are caused by an overextension of the normal range of motion
for that particular joint. The most common cause of ankle sprain is inversion (turning
the sole of the foot inward and damaging the ligaments on the outside of the ankle).
The extent of the damage to the joint is measured by the amount of trauma caused to
the ligament. Sprains are graded as follows to indicate severity:
First-Degree Sprain. The ligaments around the joint are stretched. Symptoms are
temporary pain, loss of function, weakness, tenderness at the point of injury and mild
swelling. Recovery time: 1–7 days.
Second-Degree Sprain. The ligaments around the joint are partially torn. (Think of
the ligament as a rope with some of the fibers torn, but the rope itself is still intact.
Symptoms are tenderness over soft tissue, weakness, swelling, discoloration and
limited function. Recovery time: 1–4 weeks.
Third-Degree Sprain. This is a complete rupture of one or more ligaments around
the joint. Symptoms are constant pain, loss of function, extreme tenderness over
ligaments, swelling and discoloration. Recovery: 4–6 weeks (if surgery is required, this
is a season-ending injury).
Sprains are generally characterized by swelling, discoloration, temporary or lasting pain
and decreased mobility. A phenomenon which frequently occurs immediately after a
sprain is numbness, which allows the ankle to be examined easily, but gives an incorrect
indication of the severity of the injury. Be cautious about allowing an athlete with a
sprain to resume training or competition. Resting that day will be rewarded with an
early return to training, rather than by guessing wrong and causing further damage.
The immediate treatment for sprains should be I-C-E — ice, compression and elevation.
It is important to refer an athlete with a severe sprain to a health care professional who is
familiar with sports injuries.

141
C h a p t e r 6
Return to activity after a severe sprain should be approved by a release from a
physician. A strengthening program should be begun prior to a return to training.
Exercises should be done which strengthen the muscles on each side of the injured
joint. A functional evaluation should also be performed. Examples of a functional
exam include jogging a figure 8 without limping, running a zigzag pattern without
limping when changing directions, and running and coming to a complete two-foot
stop without favoring the injured ankle or knee. Athletic taping can reinforce and
protect the joint, but it is not a substitute for rehabilitation exercises.
Strains
Strains occur either within a muscle or at the point where the muscle and the tendon
join, not at a joint. If an athlete sprains an ankle, the overextension of the muscles
surrounding the joint may result in a muscle strain as well as an ankle sprain. If you
have ever sprained your ankle and had the muscles on the side of your leg hurt, you
probably also strained your peroneal muscles above the ankle. Strains can be caused
by one traumatic overextension or by continued overuse.
Strains, like sprains, are classified by severity, as follows:
First-Degree Strain. Muscle fibers are stretched. This is commonly referred to as a
muscle pull. Symptoms are spasm of the injured muscle, pain upon contraction or
stretching and moderate pain to the touch. Recovery time: 2 days to 2 weeks.
Second-Degree Strain. Muscle fibers are stretched and partially torn. (The example
of a rope with fibers torn, but still intact, is also good visualization of a muscle tear.)
Symptoms are spasm of the injured muscle, weak and painful contraction, pain upon
stretching, loss of function, swelling and discoloration (from hemorrhage within the
muscle). Recovery time: 3–4 weeks.
Third-Degree Strain. The muscle fibers are torn or possibly completely ruptured.
Symptoms are severe pain and muscle spasm, palpable defect (you can actually feel the
indentation where the muscle has torn), swelling, discoloration and a partial to total
loss of function. Recovery time: 6–8 weeks (this is usually a season-ending injury).
Tendonitis
Tendonitis is an inflammation of a tendon, the tissue structure that attaches muscle to
bone. A tendon is covered by a sheath that surrounds it completely. When a tendon

142
C h a p t e r 6
is inflamed, the swelling causes it to stick to the sheath instead of sliding smoothly
through it. This can be very painful. Tendonitis often starts with simple tenderness
over the tendon and progresses to a painful state that restricts movement. In its most
severe state, there is painful and sometimes audible crepitus. Crepitus is caused by
the tendon rubbing against the sheath. To the injured athlete, it feels like two pieces
of sandpaper rubbing together. The cause of tendonitis can be an acute trauma or
continued overuse.
Acute Tendonitis. This occurs with one sudden overextension of the tendon, which
stretches the tendon beyond its normal limits, but does not result in rupture. An
example of such an overextension would be a high jumper overextending to hit his
takeoff mark, collapsing forward and shifting all his weight to the tendon just below
the knee.
Overuse Tendonitis. This occurs with repeated activity that slightly overloads the
tendon. The cumulative effect of this repeated overstretching is an inflamed tendon.
An example of such repeated overstretching would be the runner who changes his
training to include more hill work and experiences pain in his Achilles tendon. If
overuse tendonitis is not treated properly and the athlete continues to train without
modification, tendonitis may become chronic — a state in which the athlete is never
free of the problem.
Treatment of tendonitis consists of reducing the inflammation by resting the tendon,
icing the tendon and sometimes by taking an anti-inflammatory medication.
Sometimes the problem will require a stronger drug prescribed by a physician. Severe
cases of tendonitis often require physical therapy. Rest is a key factor in recovery.
Injuries BY EVENT
Sprinters and Hurdlers
Upper Leg Muscle Strains. These include strains in the hamstrings (back of the thigh),
quadriceps (front of the thigh) and hip flexors (area in the front of the thigh where
the leg bends at the hip).
Treatment for upper leg strains is I-C-E, a compression wrap to reduce swelling, and
referral to an M.D. if pain persists. Gentle stretching (not forced) can begin 24 hours
after a mild strain.

143
C h a p t e r 6
Shinsplints. Shinsplints is a non-specific term for an overuse injury to the lower
leg. Pain is usually found in the lower two-thirds of the shin and is associated with
tendonitis of the posterior tibial tendon or other flexor tendons along the shin.
Treatment for shinsplints includes I-C-E, taping to support the arch (this takes the pressure
off the lower leg tendons, which attach to the foot), and strengthening the muscles of the
foot and the lower leg. Increase the strength of the muscles on the front of the lower leg to
help balance and absorb landing shock.
An important factor in preventing shinsplints is analysis of the biomechanics of the
sufferer’s foot. Does it over-rotate? Is the arch unusually flat or high? Do the shoes
provide enough support and stabilization? Do they still adequately absorb shock?
A training program with a gradual increase in volume and intensity is essential.
Shinsplints is usually an early season injury resulting from attempting to do too much
too soon!
Achilles Tendonitis. Achilles tendonitis is an inflammation of the tendon that leads
from the calf down to the heel. Treatment is I-C-E, rest, placing a heel lift of 1/8–½
inch inside the shoe to shorten the stretch of the tendon, and a gradual return to
training.
Prevention measures for Achilles tendonitis include daily flexibility exercises for the
calf muscles, a strength program for the lower legs to improve balance, and wearing
good running shoes that provide support and stability.
I.T. Band Syndrome. The iliotibial band runs along the outside of the thigh and
connects at the outside lateral border of the knee. As runners increase the volume and
intensity of their training, they frequently develop pain on the outside of the knee
that has nothing to do with the knee structure itself but with the attachment of this
tendonous band.
Treatment for I.T. band syndrome includes I-C-E and wearing a neoprene knee-sleeve to
keep the area warm and compress the tendon.
The best way to prevent I.T. band problems is to employ a daily stretching program
as outlined in this coaching manual.

144
C h a p t e r 6
Knee Pain. Patellofemoral pain (pain around the kneecap) often develops directly
under the kneecap. Pain is caused by the back of the kneecap rubbing against the end
of the femur (thigh bone). This is usually caused by a malalignment (a tilt) of the
kneecap. The underside of the kneecap then becomes rough and sometime catches as
the athlete tries to straighten the leg. You may have heard this problem referred to as
chondromalacia. Symptoms include pain when running or going down stairs (worse
than going up stairs) and difficulty standing and straightening the leg after sitting for
a long period. The athlete may feel like his or her knee gives way. This instability is
caused by an occasional release of the muscles in the thigh.
Treatment of knee pain should include ice massage or wrapping an ice pack over the
kneecap and strengthening the quadriceps muscles (especially the quadriceps muscle on the
inside of the thigh). That muscle is referred to as the vastus medialis.
Prevention of knee pain requires improving the balance of muscle strength between the
front and back of the thigh and increasing the flexibility of the leg and lower back.
Distance Runners
Distance runners suffer many of the same injuries sprinters and hurdlers experience.
Plantar Fascitis. An inflammation of the thick, triangular tissue on the bottom of
the foot. The fascia attaches at the bottom of the heel and runs to the front the foot,
widening as it spreads to attach to the heads of the metatarsals (the long bones of
the foot). Symptoms of plantar fascitis are pain on the bottom of the foot with the
first few steps taken in the morning, pain present at the beginning of a workout that
diminishes during the run only to recur after training, and palpable tenderness at the
place on the bottom of the foot where the fascia attaches to the heel.
Treatment for plantar fascitis is I-C-E, rest, stretching the lower leg and small muscles of
the foot, and placing a plastic heel cup or ¼-inch felt heel pad inside the running shoe.
Some individuals may need to see a podiatrist to be fitted for an orthotic (a custom molded
foot-stabilizing device for insertion in the running shoe).
Preventive measures for plantar fascitis include stretching prior to running, wearing
supportive shoes that stabilize the heel, and training on soft surfaces such as grass or
dirt, rather than asphalt.

145
C h a p t e r 6
Heat Injuries. They are much more likely to be suffered by distance runners than
other athletes because of the duration of their events.
Stress Fractures. These are overuse injuries that generally occur in the fifth metatarsal
(lateral long bone of the foot) or one of the two bones in the lower leg. Fractures
occur when the stress placed on the bone is greater than the muscle supporting the
bone can absorb. Symptoms of stress fractures are deep, persistent pain and localized
tenderness that increases with activity.
Treatment for stress fractures is immediate referral to an M.D. for an X-ray. The fracture,
however, may be undetectable for 8–14 days until the calcification healing process is under
way. This may be a season ending injury. It takes 6–8 weeks for bones to heal completely.
Shot Putters and Discus Throwers
Throwers are susceptible to torso and upper limb problems as well as leg injuries.
Tendonitis. This is a common problem for throwers. The sudden explosive
movement and the abrupt blocking action required to propel the shot and discus
place a great deal of pressure on tendons. There are several tendons that seem to be
especially vulnerable to tendonitis. Biceps tendonitis occurs where the biceps muscle
on the front of the upper arm attaches near the shoulder. Symptoms are tenderness
over the tendon when trying to lift the arm above shoulder height or when lifting an
object that requires bending the elbow.
Treatment for tendonitis includes an ice pack or ice massage over the tender area, rest and
exercises to improve flexibility and strength. This condition may require referral to an M.D.
Effective preventive measures for tendonitis are improving flexibility and strength and
mastering good throwing technique.
Epicondylitis Elbow. This is commonly known as “Little League elbow” or “tennis
elbow” and is often seen in novice shot putters. Symptoms are tenderness over the
inside (medial) part of the elbow joint, pain on throwing and pain on grasping.
Treatment for epicondylitis elbow is ice, rest, an elbow-sleeve to keep the tendon warm, and
possibly physical therapy.

146
C h a p t e r 6
The most effective prevention measure for epicondylitis elbow is using proper putting
technique. Good strength, balance and flexibility also help.
Torn Knee Ligaments. There are several ligaments in the knee. The ligament most
susceptible to tears is the anterior cruciate ligament (which supports the inside of the
knee joint). The injury occurs most often during the plant, just prior to the release
of the implement. Symptoms are sudden pain, instability and tenderness around the
joint. Sometimes a popping sound can be heard.
Treatment for a torn knee ligament is ice and immediate referral an athletic trainer or
a physician.
The most effective preventive measure for torn knee ligaments is a well-balanced
strength training program.
Hand Injuries (usually wrist and finger sprains). These sprains occur when the
weight of the shot causes an overextension of the joint. In both cases the mechanism
of injury causes either the wrist or the fingers to be bent back farther than normal.
Symptoms are pain in the joint, swelling and limited movement.
Treatment for hand injuries should include immersing the hand in a bucket of ice water
and taping to support the joint during practice. (Beware of the rules about taping the hand
during competition.)
The most effective preventive measure for hand injuries is proper putting technique.
(Poor technique is often the result of fatigue at the end of a throwing session.)
Rotator Cuff Tears. The rotator cuff consists of four muscles which hold the head
of the humerus (upper arm bone) in its socket. These muscles stabilize the shoulder
during the action of throwing. The explosive nature of throwing frequently causes
tears or complete ruptures of one or more of the rotator cuff muscles. Symptoms of a
rotator cuff tear are pain deep in the shoulder (sometimes radiating down the arm to
the elbow) and difficulty in lifting anything for the first 15-degrees of movement to
the side.

147
C h a p t e r 6
Immediate treatment for a rotator cuff tear is ice, compression, and referral to a physician.
(This is usually a season-ending injury.) Effective preventive action for rotator cuff tears is
a well-balanced weight-training program that strengthens not only the large muscle groups
around the shoulder, but also includes specific exercises to strengthen the rotator cuff muscles.
Jumpers
Knee Pain (including patellofemoral pain or chondromalacia).
Hamstring muscle strains.
Ligament Tears. The ligaments most frequently torn by jumpers are the anterior
cruciate and the medial collateral ligaments.
Inversion Ankle Sprains. These generally occur upon landing or when planting at
takeoff. The mechanism of injury is landing with the sole of the foot turned inward.
Symptoms are tenderness around the outside lateral ankle bone where the ligaments
attach, swelling, discoloration and limited function.
Treatment for inversion ankle sprains is I-C-E, rest, and referral to a physician if pain
persists. The ankle may need to undergo a strengthening program and be taped prior to
returning to training.
Effective preventive measures for inversion sprains include training on safe surfaces,
emphasizing proper technique and utilization of a well-balanced strength program.
Cartilage Tears. These often result from either a severe twisting motion or a
hyperflexing action as one might see in a long jumper’s landing. The cartilage is the
joint cushion that sits between the tibia (shin bone) and the femur (thigh bone). As
the knee flexes and extends, the cartilage can catch between the two bones in such a
fashion as to tear it. Once torn, cartilage rarely has the capability to heal itself due to
its lack of blood supply. Symptoms are pain in the joint, tenderness when palpated
(rubbed) along the joint line, instability and locking or clicking of the joint.
Treatment for a cartilage tear is I-C-E, rest, and referral to an M.D. (This can be a
season-ending injury.) The best prevention for joint injuries is a well-balanced weight
training program.

148
C h a p t e r 6
Low Back Pain. Back pain frequently results from the jarring impact jumpers
experience upon landing. The pain may be caused by stiff muscles in the least severe
cases or by a disc or nerve injury in more severe cases. Symptoms range from stiffness
to sharp pain sometimes radiating down into the legs.
Treatment for back pain is ice, flexibility exercises, and referral to an M.D. if the pain
persists.
Due to the nature of the jumping events, it is impossible to eliminate the jarring
impact the spine experiences upon landing. The best prevention for low back pain is a
good stretching/flexibility program and a well maintained landing pit.
Neck Injuries. We most often see neck injuries in the High Jump and Pole Vault. If
you have any question as to the severity of the injury, do not attempt to move
the athlete!
A severe neck injury is a medical emergency! If the athlete expresses concern about moving
or is experiencing tingling sensations in the arms, fingers, or feet, do not move the athlete!
Call the paramedics immediately. It is always better to be overly cautious than to make a
mistake that may leave a youngster paralyzed for life.
Returning an Injured Athlete to Competition
Athletes should be free of injury symptoms before you allow them to return to
competition. There is a natural temptation on the part of the athlete, coach, and
sometimes, parents to get the athlete back into competition and training too soon.
When dealing with young athletes who in many cases have never experienced an
athletic injury before, it is your responsibility as coach to be the voice of reason when
there is not an athletic trainer on staff to help make those decisions. The athlete
should be asked daily, “How does your pain rate on a scale of 1 to 10, with 10 being
the worst?” When the response is 0, a gradual re-entry to training can begin. Until
that time, injured athletes should be involved in a rehabilitation program and other
fitness activities to maintain their conditioning. Those fitness activities can include
cycling (or stationary bike), swimming, or running in deep water with a life jacket if
those activities do not stress the injury.
When an athlete attests to 0-pain and can pass tests that assess the function of the
injured body part, he or she is ready to return to competition.

149
C h a p t e r 6
Preparing for Injuries
You should always be able to answer yes to the 10 questions posed at the beginning
of this chapter. If you could only have one thing available to deal with injuries at a
practice or a track meet, it should be ice! You should also have a well-stocked training
kit on hand.
A basic training kit should contain the following medical items:
• Band-Aids
• Disinfectant
• Antibiotic ointment
• Scissors
• Athletic tape
• Elastic wraps for compression
• Underwrap
• Tape adherent
• Gauze pads
• Vaseline or skin lube
• Q-tips
• Cotton balls
Other Health Issues
Exercise-Induced Asthma
Exercise-induced asthma affects approximately 7% of youths in the United States.
There is an increased prevalence of EIA among African-Americans versus Caucasians,
boys vs. girls and urban children vs. rural children. To the adolescent patient,
asthma means wheezing, shortness of breath and/or chronic coughing. EIA may
restrict physical activities, affect school attendance, or result in the continual use of
medication. Some individuals experience asthmatic symptoms only when exercising.
Others suffer asthmatic symptoms daily.
EIA can be recognized by coughing, wheezing, or shortness of breath during or
following exercise. The predisposition to EIA symptoms is influenced by the climate
(with cold, dry conditions being the most likely to produce EIA), the type of exercise,
and the responsiveness, or twitchiness of the airways. If you suspect an athlete has

150
C h a p t e r 6
EIA, refer that athlete to his or her family physician and discuss the potential problem
with the parents. EIA does not mean the end of an athletic career. Many successful
Olympians have EIA and control the condition with medication.
Performance-Enhancing Drugs
Performance-enhancing drugs are a realistic choice for today’s high school athlete.
They are readily available, and they work. The question we must pose to our athletes
is, “Are such drugs an ethical or healthy choice?”
This is, and always has been, a moral and ethical issue. There is no gray area when it
comes to drugs in sports. Every sport governing body from the National High School
Federation to the International Olympic Committee condemns the use of perfor-
mance-enhancing drugs as cheating. It is ironic that track and field’s leadership among
sports in providing deterrent testing and penalties for illegal drug use has contributed
to the decline of public interest in what is now perceived to be a “drug sport.”
The most frequently used performance-enhancing drugs in track and field are
anabolic steroids. These are dangerous drugs that can cause permanent damage to
vital organs of the body. Steroid abuse has damaging emotional side effects and can
result in death. The federal government recently reclassified the sale and distribution
of steroids as a Class "A" felony, the same as for cocaine.
There has been a shocking increase in the use of steroids by high school athletes looking
for a competitive edge. This is symptomatic of the overemphasis on winning at even the
lowest levels of sport in our country. Steroid use among adolescents has become almost
epidemic as non-athletes try to get that buffed look without strenuous exercise.
It is your responsibility as a coach to protect the well-being of your athletes and the
integrity of your sport by talking to them about steroids.

151
7
C h a p t e r
Performance-Enhancing Drugs & Supplements
One of the greatest challenges in sports is to address the issue of
performance-enhancing drugs. Athletes at all levels of play are often
temptedtousesubstancestoimprovetheirperformance,despitethefact
that these drugs may be illegal, unhealthy and/or contrary to principles
offairplay. Itisimportantforcoachestobeawareofthesedrugsbecause
athletes often interpret “no message” as tacit approval to use them.
The World Anti-Doping Agency that oversees all international sport
considers these drugs to be against the “spirit of sport” and surveys of
athletes uniformly support a level playing field.

152
C h a p t e r 7
Performance Enhancing Drugs
Anabolic-Androgenic Steroids
Anabolic-androgenic steroid use in athletes has been documented since the 1950’s
and the effects on muscle building and performance are well known to athletes and
body builders. Anabolic-androgenic steroids (AAS) are a classic performance-enhanc-
ing drug and have almost no legitimate therapeutic indications in athletes. In sport
they are used almost exclusively to gain a competitive advantage. Although often
called “steroids” or “anabolic steroids”, they should properly be referred to as “ana-
bolic-androgenic steroids” because they are testosterone or testosterone-like synthetic
drugs that result in both anabolic (increased muscle mass) and androgenic (develops
male secondary sex characteristics) effects. Although athletes use AAS for their ana-
bolic results, all AAS have varying amount of androgenic effects that are responsible
for most of their adverse reactions. The result is that athletes who take AAS for their
anabolic properties, to increase lean body mass or strength, cannot avoid the unde-
sired and often harmful androgenic properties of AAS use. Finally, it is important
to distinguish AAS from anti-inflammatory steroids that are called corticosteroids or
cortisone. Corticosteroids are legitimately used to treat asthma and other medical
conditions, as well as in the form of joint injections to treat inflammation.
AAS can be divided into two categories: exogenous and endogenous steroids.
Endogenous AAS are those that are naturally produced by the body in some amounts
and can be made into drugs and consumed by athletes. The most commonly used
endogenous AAS is testosterone that is made by the testes and is necessary for normal
male function. Although it cannot be taken in pill form, testosterone can be injected
into a muscle, absorbed through the skin by a patch or gel, or across the lining of the
cheek in the form of a pellet. Studies have demonstrated that injections of testoster-
one in high doses can increase muscle mass.
The other types of AAS are the exogenous or synthetic drugs. These are not pro-
duced by the body and are altered in the laboratory to change how a drug behaves in
the body. For example, adding certain side chains to testosterone allows the drug to
be absorbed orally. Other additions increase the potency of the drug or attempt to
decrease side effects. The past few years has seen the appearance of “designer” AAS
that were specifically developed to avoid detection by drug testing. Some of these are
tetrahydragestrinone (THG), norbolethone and madol (DMT).
The 1990 United States Anabolic Steroids Control Act classified AAS as a Schedule
III drug and limited the legitimate therapeutic reasons for using them. Due to the

153
C h a p t e r 7
increased availability of newer AAS, the 2004 Anabolic Steroid Control Act was
passed and this increased the number of AAS that were considered Schedule III drugs
and tightened the definition of AAS. Included in the 2004 Act were THG and nor-
bolethone, as well as many former dietary supplements that include androstenedione,
androstenediol and 19-norandrostenedione. As of this time, DHEA is still consid-
ered to be a dietary supplement and can be sold over-the-counter.
While there is no debate on the fact that large doses of AAS can increase muscle
mass, the effects on actual performance are less clear. In many sports, performance is
difficult to measure as it is influenced by factors other than strength alone. Despite
the widespread use of anabolic steroids in athletes, there is little data to support its
effects on performance. Studies have been limited to obvious targets such as weight
lifting and measuring acceleration in sprinters. In addition to strength changes, there
are additional AAS effects that may contribute to efficacy in athletes. Many have
attributed AAS strength gains to increases in aggressiveness that encourages intensity
in both training and competition. Although there are AAS receptors in brain tissue,
it is unclear as to their role. Regardless of the actual mechanism, it is clear that ath-
letes believe that AAS improve performance and have continued to use them.
Any discussion of the adverse effects associated with AAS are complicated by the fact
that scientific studies use doses of AAS far below what has been reported by athletes.
As a result, it is likely that medical studies underestimate the full extent of side effects
from AAS use. These studies do not begin to approximate the doses used by athletes
that may be 10-40 times the therapeutic dose and in multiple combinations. AAS
affect virtually every organ in the body and their effects can be divided into organ
system effects, psychological effects, sex-specific effects and potential effects on imma-
ture individuals.
The two systems that have been most studied are the cardiovascular and gastrointes-
tinal systems. AAS affect the cardiovascular system by increasing total cholesterol,
LDL (bad) cholesterol and blood pressure, while lowering HDL (good) cholesterol.
When these are combined with the potential clotting effects of AAS, the risk of coro-
nary artery disease dramatically increases and the possibility of heart attacks. Indeed,
there are multiple reports of relatively young AAS users suffering heart attacks. There
have also been reports of AAS-induced cardiomyopathy (heart enlargement) following
continued use of very high doses of these drugs.

154
C h a p t e r 7
The liver is the main target organ for gastrointestinal effects of AAS with case reports
of hepatocellular dysfunction, peliosis hepatitis (blood-pooled cysts) and hepatocel-
lular adenoma and liver cancer. Almost all reports of serious liver problems are the
result of the 17-alpha alkylated AAS designed to be taken orally. Reports from the
former East German Republic revealed three deaths due to liver failure and several
cases of severe liver damage under their AAS program.
There are several other bodily systems that are affected by AAS use, such as the mus-
culoskeletal system and skin. There are multiple reports of tendon ruptures that have
been associated with AAS use and some animal studies have demonstrated structural
changes in tendons following AAS use. It may be that AAS increase the risk of ten-
don rupture through muscle enlargement without a corresponding increase in tendon
strength. The skin will often be the most obvious organ affected by AAS use and will
display acne, striae (skin stretch lines), or abscesses, the latter from injectable use.
The psychological effects of AAS have also been reported with such conditions as the
inducement of personality disorders, hyperaggressiveness (‘roid rage) and addiction.
Although there has been a great deal of conflicting studies, a 2005 review found that
AAS could cause aggressiveness, rage, delirium, depression, psychosis, and mania. As
with many other AAS effects, the psychiatric conditions appear to be dose dependent,
meaning that the more you take, the greater the risk of side effects. Dependency on
AAS is also controversial, but some studies have determined that 75% of AAS users
met the criteria for dependence and addiction. Whether or not there is a true addict-
ed state is controversial; what is clear is that it can be very hard for some AAS users
to stop. Finally, there have also been several unfortunate cases reported in the media
of teenagers who became severely depressed shortly after discontinuing AAS use and
committed suicide.
Endocrinological effects are generally dependent on the amount of natural testoster-
one produced. For example, males produce about 7 mg of testosterone per day and
females about one-tenth that amount. Men will thus experience decreased or absent
sperm counts as well as gynecomastia (male breast enlargement) due to an excessive
amount of AAS that is metabolized into estrogens that disturbs the androgen/estrogen
balance. Females will experience all of the virilizing effects of AAS including male
pattern alopecia (baldness), clitoromegaly, hirsutism, breast atrophy, as well as men-
strual disturbances. There is also some evidence that AAS reduce thyroid function
and make the user hypothyroid.

155
C h a p t e r 7
There are also many other miscellaneous effects from the use of AAS that may be
idiosyncratic. There are reports of constitutional growth delay in youths, reduced
immune function, and unusual tendon ruptures, such as the iliopsoas and triceps
muscles. If AAS are taken by injection, the risks associated with needle use include
contracting blood borne infections, such as hepatitis B, C and HIV (AIDs). Due
to their illegal nature, some athletes have been known to utilize AAS from the black
market. These have a serious risk for contamination with impurities, false dosages, a
high risk of infection or other dangerous risks.
Allegations of AAS use in sport have been present for at least 40 years and seem to be
ingrained in athletics. It is clear that they have the ability to increase muscle mass and
thus significantly alter the competitive landscape in many sports.
Other Performance-Enhancing Substances
HUMAN GROWTH HORMONE (hGH)
hGH is a polypeptide hormone of 191 amino acids that is produced in the anterior
pituitary. Several different isoforms are naturally produced with the predominant
one being a 22 kD monomer and about 10% being the 20kD form. Due to its
structure, hGH is only effective by injection and cannot be taken orally. hGH is
naturally increased by exercise, stress and slow-wave deep sleep. This has led athletes
to try drugs such as gamma-hydroxy butyrate (GHB) to stimulate slow-wave sleep
and thus, hGH, with often disastrous results. GHB and the related compounds
gamma butryolactone (GBL) and butanediol (BD) are banned by the Food and Drug
Administration, but are still found illegally. There have been several deaths and seri-
ous illnesses associated with these compounds and they should be avoided.
It is not surprising that improvements in drug testing for AAS encouraged athletes
to explore alternatives for strength enhancement. There have been several reports of
athletes using hGH including Ben Johnson’s 1988 admission of combining hGH with
anabolic steroids, the discovery of large amounts of hGH in a Tour de France support
vehicle in 1998 and the confiscation of hGH from the baggage of Chinese swimmers
prior to the 2000 Sydney Olympics. The effects of hGH are felt to be as a “partition-
ing” agent whereby protein synthesis is favored over fat synthesis. This is opposed to
AAS that is a direct inducer of muscle growth.

156
C h a p t e r 7
Evidence of performance enhancement with hGH are limited because athletes take
much larger doses than can be given ethically in research. One small study demon-
strated some improvement in lean body mass, but no studies have definitively demon-
strated increases in strength or athletic performance.
There are significant adverse effects of hGH when used in healthy adults. Short-
term use can result in fluid retention and muscle edema, while long-term use can
cause arthralgias, diabetes, muscle disease, carpal tunnel syndrome and acromegaly.
Acromegaly is a disease of growth hormone overproduction and can result in mus-
culo-skeletal changes, especially to the skull, jaw, hands and feet. The other concern
with hGH is black market contamination. Although hGH is now biosynthesized,
there is still likely some hGH on the black market that was extracted from the pitu-
itary glands of cadavers. This has the possibility of causing infections, such as the
virus responsible for “Mad Cow Disease.” Due to its popularity and difficult avail-
ability, there are a great number of counterfeit products claiming to either be hGH or
increase hGH secretion. Many of these products are pills and powders to be taken by
mouth and since hGH cannot be absorbed orally, their claims are dubious at best.
While there are a few studies and anecdotal reports of hGH use in healthy adults,
there is no data on its use in children and adolescents. Growth hormone is used in
the treatment of growth hormone deficient children and some conditions of short
stature. When hGH became available, physicians were flooded with requests from
parents of normal children asking for the drug so that their children could achieve
extraordinary height. It would be expected that attempts to alter the growth hor-
mone-pituitary system would result in significant risks to children and adolescents.
Although there is currently no effective test for hGH, researchers are working on
several different methods of detection and it is likely that a drug test will soon be
available. There is significant temptation to use hGH in the youth population, not so
much for muscle gain, but for height enhancement.
ERYTHROPOIETIN (EPO)
EPO is a hormone that is produced in the kidneys and is responsible for regulating
the red blood cells (hemoglobin) in the body. EPO, and its related compound darbe-
poetin, have been synthesized through recombinant manufacturing and are available
for the medical treatment of anemia. Athletes in endurance sports, such as cycling
or long-distance running, began abusing EPO in order to increase endurance. This
is because the amount of red blood cells determines how much oxygen can be deliv-

157
C h a p t e r 7
ered to exercising muscle. Unfortunately, too many red blood cells in the circulation
can cause the blood to thicken and result in heart attacks and strokes. In fact, the
suspicion is that several cyclists died in the 1980’s as a result of excessive use of EPO.
There is no evidence that EPO can increase muscular strength. In 2000, an effective
test was developed to detect EPO and that has been commonly in use since.
STIMULANTS
Stimulants are a broad class of drugs that are related to naturally occurring adrenaline.
These drugs act either directly or indirectly on the sympathetic nervous system and
are available in foods (coffee, sodas and energy drinks) over-the-counter, prescrip-
tion drugs or as illegal recreational drugs on the black market. They have a wide
variety of actions in the body and the effect of a particular drug in this class depends
on which receptor it favors. For example, some stimulants like an albuterol inhaler
that is used in the treatment of asthma relax smooth muscle and open the pulmonary
tree. In general, almost all drugs in this class act to speed up the heart rate, increase
blood pressure and cause all of the effects of adrenaline, the “fight or flight” hormone.
Some examples of stimulants include ephedrine, pseudoephedrine, caffeine, Ritalin,
Adderal, albuterol, amphetamines, methamphetamine, cocaine, phenylephrine and
phenylpropanolamine.
There is evidence that athletes have used stimulants since the Roman Gladiators in
600 B.C. At the 1960 Summer Olympic Games, a Danish cyclist died during com-
petition from an overdose of stimulants. Today’s athletes use stimulants for a variety
of reasons. Some use them for their stimulants properties to feel more energetic, alert,
to fight fatigue and improve performance. This is despite the fact that although you
may feel more energetic, there have never been any controlled studies to definitively
demonstrate performance enhancement. In sports where thinness is valued, such as
gymnastics and wrestling, athletes use them as diet aids to decrease appetite, burn
calories and lose weight. Athletes may also legitimately use stimulants to treat
diseases, such as asthma and attention-deficit disorder (ADD or ADHD). Finally,
athletes use stimulants as a recreational drug to get high in the form of drugs such as
methamphetmine.
Depending on the particular drug, stimulants can have a great many adverse effects.
In general, they can cause anxiety, heart palpitations, rapid heart rate and arrhythmias,
tremors, stomach upset, and insomnia. Since stimulants often increase the metabo-
lism, there is a real concern about athletes exercising in the heat and the stimulants

158
C h a p t e r 7
contributing to heat illness. Several prominent athletes have died while exercising due
to the effects of stimulants. In addition, many of these substances are addictive with
the need for increasing doses and then requiring a depressant, such as marijuana or
alcohol in order to slow down afterwards.
Stimulants are readily available in our culture and while small amounts of drugs like
caffeine are usually not harmful, the concern is when large doses or multiple drugs
are used. For example, an athlete may have 2 cups of coffee in the morning, several
caffeinated soft drinks throughout the day, caffeine-containing energy drink (e.g. Red
Bull®) before practice, over-the-counter pseudoephedrine and dietary supplements
containing guarana or Citrus Aurantium. All of these contain varying amounts of
stimulants and the combination can cause serious problems. It is imperative to be
aware of the total amount of stimulants that an athlete may be consuming.
NUTRITIONAL SUPPLEMENTS
The 1994 Dietary Supplement Health and Education Act (DSHEA) unleashed a
whole host of dietary supplements on the American consumer. These include vita-
mins, minerals, amino acids, plant derivatives and other natural and synthetic sub-
stances that come in a variety of forms, including powders, tablets and liquids. While
this creates a great deal of confusion, one thing is very clear: dietary supplements are
aggressively marketed to athletes.
Despite all of the conflicting information on supplements, there are a few facts that
are worth noting:
1) Dietary supplements are not regulated by the same laws as over-the-counter and
prescription drugs. There is very little regulation of dietary supplements and many
studies have found that many supplements do not contain what is on the labels. As a
result, it is difficult to know with 100% certainty if what is on the label is really what
you are taking.
2) Supplements can be contaminated with impurities that will result in a positive
drug test. Whether unintentionally or intentionally, some athletes have tested positive
from taking contaminated supplements.
3) Most supplements have not been subjected to rigorous studies that prove their
positive effects. Due to labeling laws, the only restrictions on dietary supplements
are that they cannot claim to treat a disease. Other than that, they can legally make a

159
C h a p t e r 7
wide variety of claims without medical proof.
4) Most of the substances that are available as dietary supplements can be easily and
more cheaply obtained from the diet through good nutrition.
There are a tremendous number of dietary supplements on the market with more
appearing every day. Athletes are often approached to try a new product. The best
advice is to check with a certified athletic trainer, physician or registered dietician
before taking any dietary supplement. As a rule of thumb, if a product claims to
“build muscle” it may contain a form of AAS. If it claims to “increase energy” it may
contain a stimulant.
Although it is impossible to provide details on every supplement, here are a few
popular types.
DHEA
Dihydroepiandrosterone (DHEA) is the only relative of AAS that was left off the
2004 Anabolic Steroid Control Act and continues to be sold as a dietary supplement.
DHEA is metabolized in the body to androstenedione, which is metabolized to testos-
terone. It is worth noting that while very little DHEA is converted to testosterone in
men, DHEA does get converted to estradiol (a female hormone) as well. There are
no studies demonstrating either performance enhancement with DHEA or strength
gains in normal males. Because only a small amount of testosterone results from
taking DHEA, it is likely that its greatest effects would occur in females and develop-
ing adolescent males.
CREATINE
Creatine is one of the most widely used nutritional supplements by athletes and has
been touted for its ability to increase strength and power. Creatine comes from three
sources: it is a natural substance found in foods, the body is able to make it, and it
can also be prepared synthetically as a dietary supplement. The average diet contains
1-2 grams/day of creatine from protein-rich foods such as meat and fish. It is also
naturally produced by the liver, pancreas and kidneys from the amino acids methio-
nine, glycine and arginine at a rate of 1-2 grams/day. Although 90% of creatine is
stored in skeletal muscle as free creatine and phosphocreatine, it is also found in the
brain and testes.

160
C h a p t e r 7
The initial justification for oral creatine supplementation was the 1992 study of a
20% increase in skeletal muscle creatine following a 7-day loading dose. Skeletal
muscle phosphocreatine is rapidly depleted during 10-20 seconds of maximum exer-
cise, but half is resynthesized after 60 seconds with full restoration in 5 minutes.
Theoretically, taking oral creatine can potentially increase phosphocreatine stores and
thus power.
Whether creatine supplementation actually provides performance benefit has been the
subject of great debate. Most data suggest that oral creatine could only increase per-
formance in repeated 6-30 seconds bouts of exertion where there are recovery periods
of 20 seconds to 5 minutes. They found no benefit in the other situations. There
is little evidence that these gains found in a laboratory or in research translate into
improved athletic performance.
Another factor complicating creatine is the variation in individual response. Muscle-
biopsy studies demonstrated that subjects with lower levels of both muscle creatine
and phosphocreatine tended to have greater increases in creatine and phosphocreatine
after taking creatine supplements. One factor is that skeletal muscle act as a “creatine
bank” and cannot exceed a creatine concentration of 150-160 mmol/kg. Thus, ath-
letes who consume less dietary creatine, e.g. vegetarians, may benefit more from cre-
atine supplementation. That also means that once your creatine banks are full, taking
additional creatine is of little benefit. There is also likely little value to high-dose
creatine supplementation. If creatine is to be used, most authors recommend 0.3 g/
kg/day (0.15 g/pound/day) loading for 5 days, followed by 0.03 g/kg/day (0.015 g/
pound/day) maintenance. Increasing the dosage will not increase the positive effects.
As with other substances, there is a direct correlation between excessive dosage and
the risk of side effects.
Another area of controversy is that of adverse effects. Creatine causes water to be
retained by the muscles, thus pulling water away from the circulation where it is
needed and giving the potential for dehydration, muscle cramping and heat injury.
Although there are anecdotal reports, controlled studies do not seem to support a
large increase in these symptoms nor related gastrointestinal cramping. Another fear
was that once creatine muscle stores were saturated, excess creatine would unduly
tax the kidneys and result in kidney problems. While urinary creatine and creati-
nine excretion does increase with oral creatine supplementation, there have been
few reported incidents of kidney failure in subjects with normal kidney function.

161
C h a p t e r 7
However, it would seem sensible that athletes with kidney disease or other health
problems should not take creatine without physician supervision.
The most worrisome complication from creatine use is the development of lower-
extremity compartment syndromes. Studies have demonstrated increased muscle size
due to water retention and there are reports of acute compartment syndromes and
rhabdomyolysis (muscle damage). This is an important concern given the large num-
bers of creatine users.
As with other supplements, there is very little information about the manufacturing
and purity standards of creatine. There have also not been any studies on the interac-
tion of creatine with other supplements or medications.
EPHEDRINE AND CITRUS AURANTIUM
(“Bitter Orange” or “Zhi Shi”)
Ephedrine, a sympathomimetic amine, has been implicated in the deaths of several
athletes and this has prompted a closer examination of ephedrine. Until 1994, ephed-
rine was mainly consumed in over-the-counter decongestants and prescription drugs
and the biggest concern was that it could be used to manufacture methamphetamine.
The United States Dietary Supplement Health and Education Act (DSHEA) of 1994
ushered in a new era for nutritional supplements and herbal ephedra has been adver-
tised as both a weight-loss product and an energy booster. Due to the high number
of adverse effects, the US Government banned ephedra in 2003.
It is important to distinguish between pharmaceutical-grade ephedrine and herbal-
extract ephedra sold as a dietary supplement. The latter has been available in China
for thousands of years as Ma Huang and although its active ingredient is ephedrine
(one of many ephedra alkaloids), it also contains pseudoephedrine, methylphenedrine,
methylpseudoephedrine and norpseduoephedrine (cathine). The presence of multiple
compounds is further exacerbated by lack of governmental oversight due to DSHEA.
As with other supplements, studies of ephedra-containing herbal supplements found
that half exhibited major discrepancies between content and the labels with significant
lot-to-lot variations among products. This demonstrated that ephedra labels are not a
reliable indicator of content.
Ephedrine is an adrenergic stimulant that causes vasoconstriction (tightening of the
blood vessels), bronchodilation (opening of the lung passages), and tachycardia (fast

162
C h a p t e r 7
heart rate). As such, it has been associated with cerebrovascular events (stroke), heart
attacks, major psychiatric symptoms, and death. At least 100 cases of death or severe
reactions have been definitely or possibly related to ephedra in the United States. In
about half of these cases, the individuals were less than 30 years old. There is also a
concern in that athletes may use multiple types of stimulants, such as caffeine and
pseudoephedrine (pseudophed) in combination and this may increase side effects.
Lastly, stimulants such as ephedra increase heat production and when athletes exercise
in hot weather, this puts them at increased risk for heat illness and heat stroke.
Although athletes frequently consume ephedra products, there are no studies using
ephedra-containing dietary supplements for performance-enhancement. The only
related studies are a small number that used pharmaceutical ephedrine alone or in
combination with caffeine. Most of these utilized military recruits as subjects and
measured short-term use. Ephedra is also marketed as a thermogenic for weight loss
and this appeals to athletes trying to lose weight.
Reports of adverse reactions have led supplement manufacturers to promote “ephed-
rine-free” products and many interpret this to mean “stimulant-free.” In actuality,
these products usually contain Citrus Aurantium, otherwise known at Bitter Orange
of Zhi Shi. The main ingredient is likely synephrine, but it also contains octopamine
and tyramine. Synephrine is a close relative of ephedrine and has similar effects and
will likely result in similar adverse reactions as the number of users increases.
L-ARGININE OR NO2
Nitric oxide has become a popular dietary supplement due to its purported use as a
“hemo-dilator.” It is touted to increase blood flow to exercising muscle, prevent heart
disease, treat male infertility and kidney disorders. In reality, these supplements con-
tain the amino acid L-arginine that is widely available in the diet. L-arginine is also
synthesized in the liver and can be taken as a dietary supplement. Its popularity stems
from the fact that animal studies demonstrate that increasing L-arginine in the diet
can increase the formation of nitric oxide and changes in blood vessels. A small study
of L-arginine revealed that although L-arginine levels increased, there was no change
in the nitrate levels. Further more, 80% of the subjects in the study complained of
adverse effects, including diarrhea, vomiting, headache and nosebleeds. As with other
supplements, it appears that L-arginine has limited positive effects and possibly sig-
nificant side effects. L-arginine is not considered a prohibited substance.

163
C h a p t e r 7
CONCLUSION
There is often intense pressure for athletes to perform and for coaches to win.
Performance-enhancing drugs are readily available and there is a large temptation to
use these substances. It is imperative that coaches send a clear message about dis-
couraging the use of these drugs and recognize signs of their use. If a coach or par-
ent does not have accurate information about drugs or nutritional supplements, it
is essential to consult a professional, such as a physician, certified athletic trainer or
registered dietician.

164
Eating for Health and Performance
Good nutrition is an important component of any successful training
program. Food is the fuel of athletic performance. Though you cannot
control the food your athletes eat, you can guide them toward healthy
eating. To do so, you must be acquainted with the basics of proper
nutrition. This chapter is a primer to help you address some of the
nutritional demands and concerns faced by your athletes.
Though success in sports is determined primarily by athletic abil-
ity and proper training, nutrition affects the athlete in many ways.
Nutrition is important for normal growth and development and for
maintaining good health. A healthy athlete feels better, trains harder,
recovers more quickly and is less susceptible to illness.
As a coach, you can have a positive influence on your athletes’ attitudes
aboutnutritionaswellastheireatinghabits.Youngathletes,inparticular,
respect, admire and seek advice from their coaches.The following sports
nutrition information will help you guide your athletes toward better
eating, and ultimately, better health and performance.
8
C h a p t e r

165
C h a p t e r 8
The Athlete's Diet
Coaches often want to know exactly what constitutes a “balanced diet.” A balanced
diet provides all the necessary nutrients and calories the body needs to function prop-
erly. These nutrients are carbohydrates, fats, proteins, vitamins, minerals and water.
Just as there are many training strategies that achieve victory, there are a number of
dietary patterns that provide good nutrition.
The Dietary Guidelines for Americans are national guidelines for healthy eating.
Most nutritionists agree that the nutritional guidelines developed to promote health
also establish a good foundation for athletes who desire peak performance.
USDA MY PYRAMID
The USDA My Pyramid (Fig. 8-1) serves as educational tool to put the dietary
guidelines into practice. The pyramid shows the foods that should be included in
a healthful diet, and in what amounts. Athletes should be eating heartily from the
grain, vegetable and fruit groups since these groups have the highest recommended
number of servings and are nutrient-rich sources of carbohydrate. Table 1 indicates
what counts as a serving from each group.
The amount of calories a person needs to eat depends on his or her age, gender and
level of physical activity. Daily recommendations from the USDA dietary guidelines
for high school-age boys and girls from 14 to 18 years of age are listed by food groups
in the following table, (with a limited use of fats and oils, kept at 5-6 teaspoons).
CALORIE REQUIREMENTS FOR ATHLETES
Calorie requirements vary greatly from person to person and are influenced by the
level of physical activity, body size and age. Therefore, it is impossible to establish a
universal daily caloric requirement for athletes. Weight loss, weight maintenance, or
weight gain is a matter of energy balance. An athlete’s body weight will stay the same
when calorie intake equals calorie expenditure. To lose weight, energy expenditure
must be greater than energy intake. To gain weight, energy intake must be greater
than energy expenditure. If an athlete is maintaining his or her ideal competitive
weight, adequate calories are being consumed.

166
C h a p t e r 8
A number of factors influence the body weight of adolescent athletes. Many young
female athletes are concerned about their appearance and eat less than they should to
appear thin. However, restricting calories can have a negative impact on performance
and health. As calorie consumption decreases, so does nutrient intake. The minimum
requirement for high school athletes should be roughly 2,000 to 2,200 calories per
day. Athletes eating less than 1,800 calories a day probably do not consume adequate
amounts of vitamins, minerals and protein. This can cause depleted fuel stores, mus-
cle wasting, weakness, fatigue, stress fractures and impaired performance.

Some athletes have a hard time increasing their calorie intake because the volume of
a larger meal causes them discomfort, especially if they are training soon after eating.
Athletes juggling a heavy academic schedule with training and part-time job may
have difficulty finding the time to eat. These athletes can benefit from eating several
small meals and snacks throughout the day.

167
C h a p t e r 8
Fig. 8-1 The USDA My Pyramid

168
C h a p t e r 8
Table 1 Serving Sizes
Food Group
1 ounce =
• 1 mini bagel
• 1/2 cup cooked oatmeal, 1 pkg. instant
• 1 cup breakfast cereal, flakes or rounds
• 1 1/2 cup breakfast cereal, puffed
• 1/2 cup cooked or 1 ounce dry pasta or rice
• 1 small tortilla, corn or flour, 6” diameter
Daily Servings Size Equivalents
6 - 7 ounces
21/2 - 3 cups
11/2 - 2 cups
3 cups
5 - 6 ounces
1 cup =
• 1 cup chopped or florets of broccoli
• 3 spears broccoli
• 2 cups raw leafy greens
• 2 medium carrots
• 2 cups raw leafy greens
• 2 medium carrots
1 cup =
• 1 small apple
• 1 large banana
• 32 seedless grapes
• 1 large orange
• 8 large strawberries
• 8 ounces 100% fruit juice
1 cup =
• 1 cup milk
• 8 ounces yogurt
• 11
/2 ounces hard cheese (cheddar,
mozzarella, Swiss, parmesan)
• 1 cup pudding, made with milk
• 1 cup frozen yogurt
1 ounce =
• 1 ounce meat, poultry, fish
• 1
/4 cup cooked dry beans
• 1 egg
• 1 tablespoon peanut butter
• 1/2 ounce nuts or seeds

169
C h a p t e r 8
CARBOHYDRATES
Carbohydrates, such as sugar and starch, are the most readily available source of
food energy. During digestion and metabolism, all carbohydrates are eventually bro-
ken down to the simple sugar glucose for use as the body’s principal energy source.
Glucose is stored in the muscles and liver as a substance called glycogen. A high-car-
bohydrate diet is necessary to maintain muscle glycogen – the primary fuel for most
sports. When athletes do not eat enough carbohydrate, their glycogen stores quickly
become depleted, resulting in fatigue or staleness.
Though the body uses both the sugars and starches for energy, a high-performance
diet emphasizes nutrient-dense carbohydrates. Nutrient-dense carbohydrates such as
whole grain breads and cereals, rice, beans, pasta, vegetables and fruit supply other
nutrients such as vitamins, minerals, protein and fiber. Sweet foods that are high in
sugar (candy bars, donuts and cookies) supply carbohydrate, but they also contain a
high amount of fat and only insignificant amounts of vitamins and minerals.
Fruit contains the sweetest of all simple sugars – fructose. Since fruit is mostly water,
its sugar and calorie content are relatively low. Like starchy foods, most fruits are rich
in nutrients and virtually fat free.
As with calories, carbohydrate needs vary among athletes, depending on the intensity
and duration of training and body size. To determine how much an individual athlete
needs, divide his or her weight by 2.2 to get the weight in kilograms. Then multiply
the number by 6 to 8.
For example:
• 130 pounds divided by 2.2 = 59 kilograms
• 59 kilograms times 6 = 354 grams of carbohydrate
The carbohydrate content of different foods can be determined by reading food
labels. As a general guide, starchy foods and fruits provide the highest amount of car-
bohydrate (15 grams) per serving. Table 2 gives some examples of high carbohydrate
foods.

170
C h a p t e r 8
Carbohydrate Food
Raisins
Serving
Size Grams of Carbohydrate
1/2 cup
Banana
Apple
Orange
Orange Juice
Grapes
Cantaloupe
Watermelon
Corn
Potatoes
Green Peas
Carrots
English Muffin
Whtite Rice
Tortilla Shell
Pasta
Kidney Beans
Wheat Bread
Pancake
Breakfast Cereals
Crackers
Plain Popcorn
Flavored Yogurt
Plain Yogurt
Skim Milk
Granola Bar
Gumdrops
Regular Soft Drinks
Jelly
Fig Bar
Exceed Hi-Carb
Gatorlode
Nutrament
Exceed
Gatorade
1/2 cup
1/2 cup
1/2 cup
1/2 cup
1/2 cup
1
/2 cup
1/2 cup
1/2 cup
1/2 cup
1/2 cup
1/2 cup
1/2 cup
1/2 cup
1 cup
1 cup
1 cup
1 whole
1 ounce
1 cup
1 tablespoon
1 whole
1 cup
1 cup
1 cup
1 cup
1 cup
57
1 whole
1 whole
1 whole
1 whole
1 whole
1 piece
1 whole
1 whole
27
21
15
12
8
7
6
17
16
11
8
26
17
1
15
13
13
9
8-13
2-8
2
42
16
12
67
25
25
13
11
59
47
30
17
15
Table 2 Carbohydrates
C h a p t e r 8

171
C h a p t e r 8
PROTEIN
Protein is a major structural component of all body tissues and is required for muscle
growth and repair. Protein is not a significant energy source during rest or exercise.
Although athletes have slightly higher protein requirements than non-athletes, ath-
letes usually consume enough protein unless they are not eating enough calories.
Protein requirements increase when calorie intake is inadequate because the protein is
used for energy rather than for muscle growth and repair.

Current research on protein requirements suggests that athletes need about 1.2 to 1.7
grams of protein per kilogram of body weight daily. For a 154 pound (70 kilogram)
athlete, this represents 84 to 119 grams of protein a day. This amount is adequate for
athletes who are involved in both endurance and explosive events. Table 3 gives some
examples of high protein foods.
The proteins in both animal and plant foods are composed of structural units called
amino acids. Of the more than 20 amino acids that have been identified, nine must
be provided by our diet and are called essential amino acids. Meat, fish, dairy prod-
ucts, eggs and poultry contain all nine essential amino acids and are called complete
proteins. Vegetable proteins, such as beans and grains, are called incomplete proteins
because they do not supply all of the essential amino acids.
The body can make complete proteins if a variety of plant foods – beans, grains,
vegetables, fruits, nuts, and seeds – and sufficient calories are eaten during the day.
Since the body utilizes amino acids from foods eaten at different meals, vegetarians
don’t need to combine specific foods within a meal to achieve complete proteins.
FAT
Fats, or lipids, are the most concentrated source of food energy. One gram of fat
supplies about nine calories, compared to the four calories per gram supplied by
carbohydrate and protein. Fats are the body’s only source of the essential fatty acids
linoleic and linolenic acid that are required for growth, healthy skin and healthy hair.
Fat insulates and protects the body’s organs against trauma and exposure to cold. Fats
are also involved in the absorption and transport of the fat-soluble vitamins.

172
C h a p t e r 8
Protein Food
Lean Beef
Serving
Size Grams of Protein
3 ounces
Chicken Breast
Pork Chop
Fish
Roasted Peanuts
Macaroni & Cheese
Whole Milk
Skim Milk
Yogurt
Cheddar Cheese
Cooked Navy Beans
Egg
Luncheon Meat
Peanut Butter
Bran Flakes
Green Peas
Baked Potato
Wheat Bread
Broccoli
Banana
Orange
1
/2 cup
1
/2 cup
1 cup
1/2 cup
1/2 cup
1 whole
1 whole
24
1 ounce
1 cup
1 slice
1 whole
24
22
21
18
9
8
8
8
7
7
6
5
4
4
4
3
3
2
1
1
3 ounces
3 ounces
3 ounces
1 cup
1 cup
1 ounce
1 whole
1 tablespoon
1/2 cup
Table 3 Protein

173
C h a p t e r 8
All athletes need a certain amount of fat in their diets and on their bodies. The
challenge is eating a diet that provides the right amount. Most U.S. health agencies
recommend consuming no more than 30 percent of calories from fat. Too much fat
contributes excess calories in the diet, which can lead to weight gain. High fat diets
can also increase the risk of heart disease and certain cancers. Also, athletes who eat
too much fat often do not eat enough carbohydrate, which is detrimental to good
health and optimum performance.

To lower fat intake, athletes should choose lean meat, fish, poultry, and low-fat dairy
products. Fats and oils should be used sparingly. Fried foods and high fat snacks
should be limited.
VITAMINS
Vitamins are metabolic regulators that help govern the processes of energy production,
growth, maintenance and repair. Vitamins do not provide energy, although vitamins
are important for the release of energy from carbohydrates, fats and proteins.
Vitamins are divided into two groups: water-soluble and fat-soluble. Fat-soluble
vitamins include A, D, E and K. They are stored in body fat, principally in the liver.
Taking a greater amount of vitamins A and D than the body needs over a period of
time can produce serious toxic effects. Vitamins C and the B complex are soluble in
water and must be replaced on a regular basis. When athletes consume more water-
soluble vitamins than needed, the excess is eliminated in the urine. Though this
increases the vitamin content of the urine, it does not help performance.
Athletes should try to consume the amount of a nutrient recommended by the
Recommended Dietary Allowance (RDA) or Adequate Intake (AI). The RDA and AI
are the amount of a nutrient that meets the estimated nutrient needs of most people.
To avoid toxicity, athletes should not exceed the Tolerable Upper Intake Level (UL)
for a nutrient.
Generally, athletes who consume more than 1,800 calories a day get enough vitamins
from their food. However, a vitamin/mineral supplement supplying 100 percent of
the RDA or AI may be appropriate for athletes with extremely low calorie intakes or
for those who avoid foods groups.

174
C h a p t e r 8
MINERALS
Minerals serve a variety of important functions in the body. Some minerals, such as
calcium and phosphorus, are used to build bones and teeth. Others are important
components of hormones, such as iodine in thyroxin. Iron is crucial in the formation
of hemoglobin, the oxygen carrier within red blood cells.
Minerals also contribute to a number of the body’s regulatory functions. These
include regulation of muscle contraction, conduction of nerve impulses, clotting of
blood, and regulation of normal heart rhythm.
Minerals are classified into two groups based on the body’s need. Major minerals,
such as calcium, are needed in amounts greater than 100 milligrams per day. Minor
minerals or trace elements, such as iron, are required in amounts less than 100 mil-
ligrams per day. Calcium and iron deserve special attention because of their impor-
tance in an athlete’s diet.
Iron is crucial for athletes because it assists in oxygen transport in the blood and uti-
lization by the muscles. A lack of iron hurts performance by decreasing the capacity
of the muscle to use oxygen. Young female athletes in particular are at risk of iron
deficiency due to increased iron losses through menstruation and typically low iron
intake. It is recommended that coaches see that their female athletes have hemoglobin
levels checked at least once a year.
If one of your athletes appears to be iron deficient, you should consult your team
physician for diagnosis and treatment. Supplemental iron may be prescribed for
individuals whose lab tests indicate iron deficiency. However, a routine use of iron
supplements by all athletes is not recommended.
The RDA for iron is 18 milligrams for women and 8 milligrams for men. Animal
iron sources are better absorbed than vegetable iron sources. Vitamin C-rich foods
(orange juice) enhance iron absorption. Iron-enriched or fortified cereal/grain
products provide additional iron. Beans, peas, split peas and some dark green leafy
vegetables are good vegetable iron sources. Table 4 lists good sources of iron and the
milligrams of iron each provides.

175
C h a p t e r 8
Iron Food
Pork Liver
Serving
Size Milligrams of Iron
3 ounces
Chicken Liver
Oysters
Beef Liver
Dried Apricots
Turkey
Prune Juice
Dried Dates
Pork Chop
Beef
Dried Prunes
Kidney Beans
Baked Beans w/Pork & Molasses
Hamburger
Soy Beans
Raisins
Lima Beans
Dried Figs
Spinach
Mustard Greens
Peas
Eggs
Sardines packed in oil
1
/2 cup
3 ounces
1
/2 cup
1
/2 cup
3 ounces
3 ounces
1/2 cup
1/2 cup
3 ounces
1/2 cup
1/2 cup
1/2 cup
1 large
1 ounce
17.7
3 ounces
3 ounces
3 ounces
1/2 cup
1/2 cup
1
/2 cup
1 cup
1/2 cup
8.4
6.9
6.6
5.5
5.1
4.9
4.8
4.5
4.2
3.9
3.0
3.0
3.0
2.7
2.5
2.5
2.2
2.0
1.8
1.4
1.2
1.0
Table 4 Iron

176
C h a p t e r 8
An adequate calcium intake is important not only to prevent osteoporosis (bone
deterioration), but because calcium also helps to maintain bone density and prevent
stress fractures. An athlete’s calcium needs are greatest during adolescence, when the
bones are growing. Young women athletes who develop amenorrhea (absence of men-
ses) have increased bone loss. This is a serious health risk, since once bone mass is
lost, it may never be fully replaced.
The AI values for calcium are 1,300 milligrams for youths and adolescents ages 9 to
18. If an athlete does not consume four servings of calcium rich foods such as milk,
cheese, yogurt, or green leafy vegetables each day, a calcium supplement may be
necessary. One glass of milk contains 300 milligrams of calcium. Table 5 lists good
sources of calcium and the milligrams of calcium each provides.
WATER
Water is the most essential of all nutrients for athletes. At rest, athletes need at least
two quarts of fluid daily. An adequate supply of water is necessary for control of body
temperature during exercise, for energy production, and for elimination of waste
products from metabolism. Dehydration – the loss of body water – impairs exercise
performance and increases the risk of heat injury.
Consuming adequate fluid before, during and after exercise is vital for safeguarding
health and optimizing athletic performance. Athletes should drink 14 to 22 ounces
of fluid two to three hours before exercise. During exercise, athletes should drink
6 to 12 ounces of fluid every 15 to 20 minutes. Fluid intake should closely match
the fluid loss from sweating to avoid the detrimental effects of dehydration. After
exercise, athletes should drink at least 16 to 24 ounces of fluid to replace every
pound of body weight lost during exercise.
Thirst is not an adequate guide to fluid replacement. Most athletes replace only
50 percent of their fluid losses during exercise. Encourage athletes to replace fluids by
drinking according to a time schedule rather than in response to thirst.
Sports drinks containing carbohydrate and sodium are recommended during
intense exercise lasting longer than an hour. The carbohydrate helps to delay fatigue,
improve fluid absorption and replace glycogen following exercise. The sodium helps
to stimulate thirst, increase voluntary fluid intake and enhance fluid retention.

177
C h a p t e r 8
Calcium Food Sources
Plain Yogurt
Serving
Size Milligrams of Calcium
1 cup
Skim Milk
Whole Milk
Cottage Cheese
Swiss Cheese
Mozzarella Cheese
Cheddar Cheese
Ice Cream
Oysters
Salmon w/ Bones
Sardines w/ Bones
Turnip Greens
Mustard Greens
Collard Greens
Spinach
Broccoli
White Beans
Cabbage
Kidney Beans
Lima Beans
Carrots
Prunes
Orange
Tangerine
Almonds
Walnuts
Peanuts
Pecans
1 ounce
1 ounce
1/2 cup
8 large
1 medium
1 large
1
/2 cup
1
/2 cup
1
/2 cup
1
/2 cup
415
296
288
282
248
207
204
175
343
86
74
184
183
152
83
67
50
49
48
38
37
90
62
40
152
60
54
43
1 cup
1 cup
1 cup
1 ounce
1 ounce
1 ounce
1 cup
1 cup
1/2 cup
1/2 cup
1/2 cup
1/2 cup
1/2 cup
1/2 cup
1/2 cup
1/2 cup
1/2 cup
Table 5 Calcium

178
C h a p t e r 8
Pre-Competition Meals
The primary purpose of the pre-competition meal is to provide energy and fluid
for the athlete during the game. Carbohydrate-rich foods provide the quickest and
most efficient source of energy, and unlike fatty foods, are rapidly digested. Since
many athletes experience abdominal discomfort if they have food in their stomachs
during competition, the timing of the meal is important. To avoid potential gut
distress, the calorie content of the meal should be reduced the closer to exercise the
meal is consumed. A small meal of 300 to 400 calories is appropriate an hour before
exercise, whereas a larger meal can be consumed four hours before exercise.
The athlete’s foods and fluids should be well tolerated, familiar (tested in training)
and palatable. Athletes may have to do some planning to ensure they have access to
familiar foods before competition. They may need to bring their lunch/snacks in a
small cooler rather than choosing from the school cafeteria’s entrees or a restaurant
menu. Encourage them to bring any foods that they believe will help them win.
Experimenting with a variety of pre-exercise meals in training helps athletes
determine what foods they are most likely to handle before competition. Athletes
should never try an untested food or fluid before competition. The result may be
severe indigestion and impaired performance.
Fueling During Competition
During tournaments or meets, athletes require fluids and carbohydrate throughout
the day. Some athletes may be reluctant to eat and drink because they have to compete
again. However, failing to refuel and replace fluid losses can cause their performance
to deteriorate, particularly toward the end of the day. Bringing along a cooler packed
with familiar high-carbohydrate, low-fat meals and snacks keeps athletes from then
being dependent on the high-fat fare typical of concession stands.
Since everything an athlete eats before a competition may be considered a pre-event
meal, it is important to consider the amount of time between competitions. If there is
less than an hour between games or events, athletes can consume liquid meals, sports
drinks, carbohydrate gels, fruit juices, and water. When there is an hour or two between
games or events, athletes can consume easily digestible carbohydrate-rich foods such as
fruit, grain products (fig bars, bagels, graham crackers), low-fat yogurt, and sports bars in
addition to drinking fluids. When games or events are separated by three hours or more,
the athlete can consume high-carbohydrate meals along with drinking fluids.

179
C h a p t e r 8
Achieving Ideal Competitive Weight
Some athletes fight to keep pounds off; others struggle to keep pounds on. Genetics,
age and training all influence body weight. Food intake and lifestyle also play impor-
tant roles. Athletes will perform at their best if they achieve their competitive weight
(while adequately hydrated) either in the off-season or early in the season. Allowing
for an increase in lean tissue and decrease in body fat during training, the athlete
should try to maintain that weight throughout the season.
Young athletes with busy schedules tend to have irregular eating habits and sleeping
patterns. As a result, gaining weight or keeping it on can be a problem. Athletes who
have difficulty gaining weight generally aren’t eating enough calories. Athletes can
increase calorie intake by changing the amount and type of food eaten, and increas-
ing the frequency of meals and snacks. To gain weight, athletes should eat five to six
times a day.
To lose weight, athletes need to reduce their calorie intake. Increasing activity in
addition to reducing calories helps promote weight loss. The recommended rate of
weight loss is one-half pound a week, which requires a caloric deficit of 250 to 300
calories per day. Paying attention to the amount of and types of food eaten is impor-
tant. Eating fewer high fat foods such as fried foods, gravies, sauces, high fat snacks
and deserts can significantly reduce calorie intake.
A safe level of caloric restriction depends on the athlete’s normal dietary intake. Males
should not consume fewer than 2,000 calories per day. Females should not consume
fewer than 1,800 calories per day. Extreme caloric restriction can disrupt physiologi-
cal function, nutritional status, hormone levels, bone mineral density, psychological
function and, for young athletes, growth rate.
Eating Disorders
Losing weight to achieve the “ideal” weight, percent body fat, or appearance can
become an all-consuming obsession for some athletes. As a result, athletes may
develop eating disorders that jeopardize both performance and health. Although rec-
ognition of these life-threatening disorders is growing, appropriate intervention and
treatment lag far behind the problem.

180
C h a p t e r 8
Eating disorders such as anorexia nervosa (self-imposed starvation) and bulimia
nervosa (binge/purge syndrome) are defined as severe disturbances in eating
behavior. Female athletes are at greater risk for eating disorders than are female
non-athletes or males. Eating disorders are more prevalent in sports where appearance
is judged, in weight-classification sports, and in sports that emphasize leanness to
enhance performance.
Abnormal eating patterns do not always mean the athlete has an eating disorder.
There is, however, cause for concern if an athlete shows the following signs or behav-
iors:
• Dramatic weight loss or extreme fluctuations in weight
• Claims to feel fat at normal or below normal weight
• Preoccupied with food, calories and weight
• Amenorrhea (loss of menstruation)
• Often eats secretively – avoids eating with the team
• Often disappears after eating, especially after a large meal
• Mood swings
• Excessive exercise that is not part of training regimen.
Do not attempt to diagnose or treat an athlete with an eating order. Anorexia
nervosa and bulimia nervosa are very complex problems and require treatment by
medical professionals. Your role should be to help the athlete contact a medical
professional that specializes in treating eating disorders. If the athlete denies having
a problem, but the evidence appears undeniable, consult with a physician who will
assist you with the situation.
Several risk factors or triggers have been identified that are associated with the
development of eating disorders in athletes. Compared to other athletes, athletes with
eating disorders began both sports-specific training and dieting earlier, and felt that
puberty occurred too early for optimal performance. Other triggers included pro-
longed periods of dieting, frequent weight fluctuations, a sudden increase in training
volume, and traumatic events such as injury or loss of a coach. Many athletes who
began dieting to improve performance reported that their coach recommended they
lose weight. The risk for eating disorders was also increased when the weight loss was
unsupervised.

181
C h a p t e r 8
While sports do not cause eating disorders, it is possible for an eating disorder to
be triggered by a comment from a person who is very important to the athlete. All
members of the athletic team family – coaches, trainers, athletic administrators and
especially teammates – are significant people in an athlete’s life. Consequently, these
individuals have the power to be a helpful or harmful influence on susceptible
adolescent athletes.
A great deal of caution must be given to the process of weigh-ins. The risk of trigger-
ing an eating disorder is increased when the numbers are used to set unrealistic weight
goals for rapid weight loss, to browbeat or ridicule the athlete for gaining weight, or
to impose excessive pressure on the athlete to show immediate weight loss.
Coaches and trainers must realize that their opinions and remarks about body weight
can strongly influence an individual’s eating behaviors. Commenting on someone’s
body size or need for weight loss (without offering guidance on how to do this health-
fully) may trigger the development of an eating problem in vulnerable athletes.
As a coach, you can play an important supportive role in helping your athletes deal
with the emotional and physical stresses of training and maintaining weight by:
• Providing your athletes with the basic nutritional information that appears in
this chapter
• Not overplaying the impact of weight on performance
• Emphasizing that long-term, good eating habits and sensible weight control will
optimize athletic performance
• Providing appropriate advice regarding weight loss/gain, rate of weight loss/gain,
and target weight range.

182
Organizing a Home Track Meet
High school athletes and the sport of track and field deserve well
organized and smoothly run competitions. One of the primary duties
of the coach is the planning and conducting of great home dual meets.
The dual meet is the lifeblood of high school track and field. Events
that are held on schedule, appeal to spectators, and offer challenges to
the athletes show the sport at its best. The ability to host a well run
home track meet is the measure of a coach’s capability to organize.
9
C h a p t e r

183
C h a p t e r 9
A well-run, exciting and visually appealing home dual meet will go a long way in help-
ing to build a high school track and field program. It will help recruit students who are
attracted by the excitement, it will build support on campus from administrators and
faculty who see a well-run, well-organized event, and it will certainly let visiting teams
know they are in for a dogfight when they get off the bus and see this school is “seri-
ous” about track and field.
Hosting a good home dual track meet is not difficult, even for a new coach, if there is
proper planning and organization.
How to Prepare for a Home Dual Meet
COACH's Checklist: Prior to start of season
q Personally meet with the head of the maintenance department to give him or her
a copy of the home meet schedule, and make sure he or she understands exactly
what you will need for each meet (that includes restrooms cleaned, unlocked and
stocked along with tables, chairs and the PA), what time everything needs to be set
up, and what time will they be able to put everything away.
q Have athletes work to prepare their specific event area. Clean grass from the side
of runways, add sand to pits, paint marks on rings, etc.
q Make a list of all the equipment (clipboards, stopwatches, rakes, crossbars, etc.)
needed to host a home meet and give a copy to your athletic director and activities
principal.
q Meet with the activities principal or athletic director to make sure starters have
been assigned for all home meets. Also inquire whether or not your school has a
“service hours” requirement for your faculty. Many schools require as part of the
teacher contract that teachers work a certain number of hours each year at extra-
curricular activities. Many teachers would rather work at a track meet after-school
than a dance on Friday night.
q Send out personal letters to all alumni, parents, adult friends and faculty ask-
ing them if they would volunteer to work as an official at one or more of your
home meets. Include a form for them to check off the meets they will help and an
addressed envelope for them to return the form to you.

184
C h a p t e r 9
COACH'S CHECKLIST: AT LEAST TWO DAYS PRIOR TO THE
HOME DUAL MEET
q Confirm officials’ assignments. Have at least one adult official for each of the field
events, three adult timers, three place pickers, and one adult to record the official
results and also to keep a running score of the meet. No one on the home school’s
coaching staff or the opposing school’s coaching staff should ever be an official in
any capacity. All coaches should be left free to coach and organize their athletes and
teams during the meet.
q Post assignments for individuals and groups (ie. throwers, jumpers, vaulters. etc.)
for setting up and preparing facilities the day before the meet, the day of the meet
and putting away equipment following the meet. During the meet, athletes should
already have been assigned to be on the hurdle crew, block crew, pit rakers, result
runners, or taking team splits. All athletes should have an assignment after they have
completed their last event and warmed down. Those competing in the first and last
events can help set up or put away equipment.
q Fill out field event cards (see sample). All field event cards should be completely
filled out with the division, order of competition (ie, girls varsity, girls junior varsity,
boys varsity, etc.) and the names of the athletes from the home school listed in alter-
nating positions with your best performer last in flights of the field events. (Include
first names for the announcer!)
All of the field event cards for a single event should be placed on a single clip board.
A copy of the specific rules for that event should be taped to one side of the clip-
board and a copy of the overall order of events should be taped to the other side.
Create a ready box for each field event. Place the clipboard with all the entry sheets
in a “ready box.” Also included in that “ready box” should be a tape measure, several
pencils with erasers, distance markers (if needed), official flags, cones and the names
of the athletes who are scheduled to help. When the officials arrive at the meet, their
complete “ready box” can be handed to them and they are all set to go to
their event.
q Prepare running event cards (see sample). All running event cards should be filled
out with division and order information. Those cards should be placed in event
order on a clipboard for the Clerk of the Course. A copy of the order of events
should also be taped to the back of the clipboard.

185
C h a p t e r 9
Traditional High School Order of Events
• 4 X 100m relay
• 1600 Meters
• 100M/110m hurdles
• 400 Meters
• 100 Meters
• 800 Meters
• 300M hurdles
• 200 Meters
• 3200 Meters
• 4 x 400m Relay
Checklist: Day Before THE Meet
q Stack hurdles at the appropriate height and locations (whichever your league order
dictates be run first) on the side of the track at the appropriate markings. If the
school situation dictates hurdles cannot be left out over night, place hurdles in the
protective shed or garage already set to the height for the first hurdle event.
q Chalk the shot and discus landing sectors. Check your section or state’s current rule-
book for instructions.
q Turn over and rake the sand in all long and triple jump pits.
q Post the Order-of-Events in several locations around the track.
q Check all starting blocks to make sure pins are in place and oil them if each
individual pedal does not move easily or the nuts are not loose. Place all starting
blocks on block caddy (a shopping cart will do) and make sure there are several
block hammers.
q Make sure there is a legal crossbar for each high jump and pole vault pit and they
are placed in a location where they will be easily found.
q Gather all rakes and shovels in one location. There should be at least one broom for
all field event areas to clean runways and rings. Additionally, there should be a mini-
mum of one rake and shovel at each long and triple jump pit.
q Place benches in a clearly identifiable “bull pen” area so visiting team has a location
to “camp out” during the meet.

186
C h a p t e r 9
Checklist: Meet Day
q Set out jumping pits, standards, crossbars, rakes, brooms and shovels at the pole
vault, long and triple jump pits and brooms at the shot and discus rings.
q Supervise the dragging of the track and marking of the lanes, especially the relay
exchange zones.
q Make sure the following are clearly marked.
• Finish line
• Starting lines for the 110m hurdles and 100m
• Start staggers for the 200m, 300m hurdles and 400m
• Exchange zones and acceleration zones for the 4x100m relay and 4x400m relay
• Curved starting line for the 800m/1600m/3200m races.
q Place all starting blocks by the start lines for the 4x100m relay and 100m hurdles
(the first running events of the meet which require blocks).
q Place cones at the 100m break line for the 800m-1600m-3200m races (if applicable).
q Check out the PA system.
q Put flags around the finish line and all throw and jump areas to make sure no ath-
lete accidentally walks into those areas during the meets. (Flags are also a great way
to give the meet a little “pizzazz.” They are very inexpensive and coaches should
include them in their annual budgets for the following year.)
Checklist: PRIOR TO the Start of the meet
q Be on hand with the captains of your team to greet opposing coaches and teams as
they arrive. Answer any questions they may have and show them to their bull pen
area. Ask them to fill in the names of their entries on the Field Event Forms.
q If your league or section rules dictate there be a coin flip prior to the meet to deter-
mine choice of lanes, make it special. Bring captains to the middle of the field, just
as in a football game, and have the starter toss the coin.
q Confirm your officials’ and workers’ assignments as they arrive and issue them their
"ready boxes."

187
C h a p t e r 9
Checklist: After the Meet
q Supervise the collection and storage of all meet materials and equipment.
q Call in the results to your local paper. (If you want press coverage, you have to be
prompt and consistent in calling in your results — win or lose!) Make note of out-
standing performances, school records, multiple event winners, etc.
q Post the meet results and scoresheet for your team to look over before the next day’s
practice. Team and individual results of each athletes’ performances in the meet,
including split sheets for the distance races and relays and the field event series for
the jumps and throws, should be posted before the athletes arrive for practice the
next day.
q Meet with the entire team and briefly critique their performances and highlight any
new PRs, school records, etc.

188
C h a p t e r 9
Track Events
(Your School) (vs. ) Date
Starter/Referee Announcer Scorer
Head Timer Clerk of the Course Result Runner
Timers & Place Pickers: Starting Block Crew:
1st place watch # ( ) lanes 1-2-3-4
2nd place watch # ( ) lanes 5-6-7-8
3rd place watch # ( ) Lap Cards:
4th place watch # ( )
4 x 100m Relay Inspectors: 4 x 400m Relay Inspectors:
1st exchange front
2nd exchange back
3rd exchange
100m/110m Hurdle Crew: 300m Hurdle Crew:
flight 1 flight 1
flight 2 flight 2
flight 3 flight 3
flight 4 flight 4
flight 5 flight 5
flight 6 flight 6
flight 7 flight 7
flight 8 flight 8
flight 9
flight 10
Team Timers & Split Takers:
officials ’ and workers ’ assignments sheet

189
C h a p t e r 9
Field Events
Pole Vault — Head Judge:
Bar Setter: Pole Catcher:
High Jump —
Head Judge : Bar Setter:
Long Jump — Head Judge:
Landing Judge: Pit Raker:
Triple Jump — Head Judge:
Landing Judge: Pit Raker:
Shot Put — Head Judge:
Landing Judge: Retriever:
Discus — Head Judge: Landing Judge:
Landing Judge: Retriever:

officials ’ and workers ’ assignments sheet

190
C h a p t e r 9
Paperwork Materials [total number]
p Team Entry Lists [ ] p Clipboards [ ]
p Officials’ Assignments Sheet [ ] p Pens [ ]
p Scoresheets [ ] p Pencils [ ]
p School Records Sheet [ ] p Stopwatches [ ]
p Track Event Entry forms [ ] p Batons [ ]
p Field Event Entry Forms [ ] p Measuring Tapes [ ]
p Team Split Sheets [ ] p Marking Spikes [ ]
p Order of Events Sheets [ ] p Lap Cards [ ]
p National Federation Rulebook [ ] p Bullhorns [ ]
p CIF Track & Field Preview [ ] p Whistle [ ]
p Check for Starter [ ] p First-Aid Kit [ ]
p Emergency Phone Numbers [ ] p Scotch Tape [ ]
p Medical Release Cards [ ] p Red/White Flags for Relay Inspectors [ ]
meet materials checklist

191
C h a p t e r 9
MEET STARTING TIMES:

Field Events
DATE Track Events
Boys’ Varsity
4 x 100m A RELAY 1 4 x 100m B RELAY 1
2

2
3 3
4 4
alt. alt.
1600 METERS SHOT PUT
110M HURDLES DISCUS
400 METERS LONG JUMP
100 METERS TRIPLE JUMP
800 METERS HIGH JUMP
300m HURDLES POLE VAULT
200 METERS NOTES
3200 METERS NOTES
2

2
3 3
4 4
alt. alt.
team entry list

192
C h a p t e r 9

Field Events
DATE Track Events
p Boys’ Frosh-Soph Entries p Boys’ Junior-Varsity Entries
2

2
3 3
4 4
alt. alt.
110m HURDLES DISCUS
200 METERS NOTES
3200 METERS NOTES
2

2
3 3
4 4
alt. alt.
team entry list

193
C h a p t e r 9

Field Events
DATE Track Events
Girls’ Varsity
2

2
3 3
4 4
alt. alt.
100m HURDLES DISCUS
200 METERS NOTES
3200 METERS NOTES
2

2
3 3
4 4
alt. alt.
team entry list

194
C h a p t e r 9

Field Events
DATE Track Events
p Girls’ Frosh-Soph Entries p Girls’ Junior-Varsity Entries
2

2
3 3
4 4
alt. alt.
100m HURDLES DISCUS
200 METERS NOTES
3200 METERS NOTES
2

2
3 3
4 4
alt. alt.
team entry list

195
C h a p t e r 9
EVENT DATE
MEET
Runs, Relays and Hurdles
CONTESTANTS SCHOOL POSITION NUMBER ORDER OF FINISH
PLACE NAME SCHOOL NUMBER TIME TEAM PONTS
1st
2nd
3rd
4th
5th
6th
7th
8th
entry form for running events
LANE OR

196
C h a p t e r 9
EVENT DATE
MEET FIELD JUDGE
Long Jump / Triple Jump / Shot Put / Discus
contestants School NO. trials finals
first Second Third first Second third best mark_
distance distance distance distance distance distance distance
FT. in. FT. in. FT. in. FT. in. FT. in. FT. in. FT. in.
PLACES NAME SCHOOL NO. DISTANCE TEAM POINTS
1st
2nd
3rd
4th
5th
6th
7th
8Th
entry form for field events

197
C h a p t e r 9
competitionformforfieldevents
EVENT DATE
MEET FIELDJUDGE
PoleVaultandHighJump
HT. HT. HT. HT. HT. HT. HT. HT. HT. HT. HT. HT. HT. HT.
CONTESTANTS SCHOOL NO.
PLACE NAME SCHOOL NO. HT. TeamPOINTS
1st
2nd
3rd
4th
5th
6th
7th
8th

198
C h a p t e r 9
tEAM/scoresheet
trackmeet DATE place SCHOOLS
Summary
event firstplacepts. secondplacepts. thirdplacepts. fourthplacepts. fifthplacepts.
competitorschool competitorschool competitorschool competitorschool competitorschool
totalteampoints
teamstandings

199
C h a p t e r 9
team splits sheet
distance splits DATE
MEET

200
C h a p t e r 9
team splits sheet
Sprints / Hurdles / Relays
p VARSITY BOYS p F-S BOYS p VARSITY GIRLS p JV GIRLS
MEET DATE
TIME 200 TIME
100m 400m

200m 300m HURDLES

100/110m HURDLES 4 X 100m RELAY A TIME 4 X 100m RELAY B TIME
1. 1.
2. 2.
3. 3.
4. 4.

4 x 400m RELAY A 200 400 4 x 400m RELAY B 200 400
1. 1.
2. 2.
3. 3.
4. 4.
FINAL TIME FINAL TIME
exchanges
E = Excellent
G = Good
P = Poor

201
C h a p t e r 9
Thornridge Track Results: 10th Annual TTT Track & Field Classic
• Friday, April 25, 1991 • Thornridge Field • Conditions 45°, NE winds 10-15 mph • Track 440 yards, resilite
Scores:
1. THORNRIDGE 164 7. Bloomfield 20
2. Bloom 88 8. Riverside-Brookfield 20
3. Thornwood 66 9. Rich Central 14
4. ESL Senior 60 10. Springfield Southeast 12
5. ESL Lincoln 50 11. Springfield Lanphier 12
Notes:
Congratulations! Our #1 State Ranking was NO FLUKE. And you can add Illinois'#2-3-4-8 and 11 rated teams to the list
of believers!! In a field that included State Leaders in 8 events, plus 65 Individuals and 19 relay Teams ranked among the
Top 10, your pride, your poise, your competitive savvy and your great performance were magnificent!!!
• All but 1 of our 21 entries scored!
• We scored in every one of the 18 events, except the Pole Vault!
(2nd place Bloom scored in only 9 events)
• We won 7 events!
• Our lowest placing in 17 events was 4th!
• We scored enough points in the running events alone to win the meet!
From talking with you, we don't have a single individual or relay foursome that believes they have approached their maxi-
mum performance or potential, PRIDE-POISE-CONCENTRATION-MENTAL TOUGHNESS... We've only just begun. Our best
is yet to come!
individual scoring: 10-8-6-4-2 all events (164 points/20 scorers)
20 Jim Lail 5.5 Sylvester Baugh
18 Mike Shields 5.5 Bob Spivey
18 Dennis Strong 4 Leon Fuller
16 Mike Kirk 2 Cliff Hall
5 1/2 Ali Leonard 2 Dexter Roberson
12 Glenn Jackson 2 Jim Ruddy
10 Dion Kemp 1 1/2 Perry Asauskas
10 Greg Benford 1 1/2 Dave Rickert
8 Mike Sullivan 1 1/2 Craig Capello
7 1/2 Larry Young 1 1/2 Lenny Kinnebrew
NEW PERSONAL RECORDS: Thornridge All-Time Outdoor Rankings in [ ]
Mike Shields 22'3-1/2" LJ [#3] 66'7"HJ[#4] Dave Rickert 2:00.0 800m
Greg Benford 46'10" TJ[#1] Larry Young 1:57.1 800m [#9]
Dennis Strong 45'7-3/4" TJ[#3] Mike Kirk 8:59.7 3200m [#1]
Jim Lail 56'8-1/2" Shot Put[#2] Mike Sullivan 4:21.1 1600m [#7]
Bob Spivey 22.1r Manny Perryman 10:13.5 Steeple [#7]
Glenn Jackson 21.8r Bob Hines 10:22.3 Steeple [#10]
New School records:
Varsity Triple Jump 46'10" Gregg Benford
Varsity 3200m Run 8:59.7 Mike Kirk
S A M P L E M eet C riti q ue

202
C h a p t e r 9
How to Recruit and Train Adult Officials
It takes a cadre of competent, dependable adult officials to conduct a home track
meet. Although administrators would find it unthinkable to use students to officiate
at a school’s football or basketball contests, there is widespread use of students to offi-
ciate track meets.
Not only does this practice trivialize and devalue the sport of track and field but it
also can lead to questions of fairness and accuracy in determining places or marks.
While students can and should be utilized to assist with the mechanics of conducting
a track meet, it is irresponsible to allow the judgment and expertise of a high school
student to influence or determine the outcome of even a single event.
Sources of Adult Officials for Your Meet
• School faculty and staff. Personally distribute to all school personnel a letter
requesting their help and outlining how easy and fun it is to be an official. Don’t
leave out anyone. Maintenance workers, cafeteria staff, secretaries and campus secu-
rity officers are all great sources that are usually never tapped to help.
• Parents of your team members. Distribute an officials' sign-up sheet at your pre-
season parents meeting or give sign-up sheets to your athletes to take home. Impress
upon the parents how important adult officials are to making your meets quality
events. Tell athletes to include older adult brothers, sisters, aunts and uncles.
• Team alumni. Make a pitch to all your seniors who plan on staying in your area after
graduation. Many will be eager to stay involved with your program as a meet official.
• PE or coaching majors from your local community college or university. Put in a
call to the school’s Physical Education Department chairman. Many of these pro-
grams require their students to serve internships at local schools or to provide com-
munity service.
• Coaches from other sports on your campus. No one knows better how impor-
tant it is to have a well run athletic contest than another coach. Appeal to them
to come help. They usually enjoy seeing their own athletes in a different sport. In
addition to you contacting the other coaches, have the athletes on your team who
do other sports ask those coaches also. Don’t forget to ask the walk-on coaches who
coach other sports.

203
C h a p t e r 9
Training Your Officials
Each spring it is recommended there be a mandatory preseason meeting with all your
officials: It would be nice to have pizza and sodas and make it somewhat of a social
gathering; however, you should also do the following.
• View a video on track and field officiating for meet volunteers. (Contact your local
USATF office for their instructional video.)
• Distribute and discuss any new rules, rule interpretations, or procedures which
will affect officiating in the coming season.
• Ask for and answer any specific questions regarding officiating or your home-meet
procedures.
• Record your officials’ preferred officiating assignments.
• Provide a one-page summary of the rules and judging instructions for each official’s
assignment preferences.
• Recommend your officials become USATF-Certified. Arrangements can be made with
local USATF association to provide your officials with a free one-day workshop,
culminating with an open book test on the rules of track and field officiating. With
USATF certification your officials can qualify to officiate the other Championship
meets and even major USATF meets throughout the season.
• Ask your officials to recommend others who might be interested in becoming officials
for your home meets.
Keys to Well-Officiated Track Meets
• The key to having a full complement of officials is notifying them of their assign-
ments and time to report well in advance of the meet. This also gives you time to
find replacements and provide them with the necessary instruction and information.
• The key to conducting a quick-paced track meet which runs on schedule is having
a competent Clerk of the Course – this should be your most competent and
experienced official. The COC assembles the participants for each running event in
a staging area located near the starting line and gives them their lane assignments
and final instructions prior to the race. This enables competitors to take their
starting positions immediately upon the completion of the prior event and saves the
Starter from having to take the time to position and instruct the participants for

204
C h a p t e r 9
every race. While one race is in progress, those in the next race should be waiting
to take their starting positions, while those in the following race are receiving
instructions from the COC.
• The key to having an efficiently run finish line is a well informed and experienced
Head Timer/ Finish Judge. The Head Timer assigns the places to be picked and
timed by the other timers. The easiest places to pick and time are first and second,
so the most experienced timers should be assigned third, fourth, fifth, etc. The
Head Timer also coordinates each race with the Starter, and records the results and
times on the results sheet after each race.
• The key to making the track meet a spectator event is having a good announcer.
Your PA system should not be used to call participants to the starting line for each
race. That is an administrative function, which should be performed by the Clerk
of the Course, armed with a bullhorn.
The announcer should be knowledgeable about track and field, enthusiastic, and
comfortable in front of a microphone. He or she should be able to call each race
and identify the leaders, read split times, and announce the unofficial winners and
times immediately upon the completion of the race.
The announcers should keep spectators informed about what is happening in the
field events and the running team scores during the meet. He or she should also be
equipped with knowledge or information to relate performances to your school and
stadium records, all-time lists and seasonal league and state bests.
Look for potential announcers among those who announce your football and
basketball games and faculty members in your English, drama and debate
departments.

205
C h a p t e r 9
Your Meet Referees
The Starter is the Meet Referee unless someone else is designated as such. The
Referee’s responsibilities are the following:
• Follow and enforce the rules of track and field established by the National High
School Federation, the state federation, the local section and the league.
• Interpret and apply all rules governing the competition.
• Serve as the Agent of Appeal for all protests.
• Resolve any question or dispute during the meet which is not covered by the rules.
• Disqualify contestants. All other officials can only report violations to the Referee
for a ruling.
• Verify and sign any record applications.

206
Training Sprinters
Track and field is mostly a sprint sport. All things being equal,
speed usually wins the race. The pure sprint events include the
100 meters, 200 meters, 400 meters, and the 4x100 and 4x400
relays. Sprint speed is also a crucial component of the hur-
dles, horizontal jumps, pole vault, and middle distances. To have
winning teams, coaches must be able to teach and train their
athletes to run with speed.
10
C h a p t e r

207
C h a p t e r 1 0
Training Sprinters
A Philosophy for Coaching the Sprint Events
Basketball coaches have been known to say, “You can’t coach height, so you better recruit
it!” Similarly, coaches and athletes in all sports have surrendered to the belief that
speed, like height, is a trait predetermined by genetics and something that cannot be
significantly improved by training. The truth is, speed can be significantly improved
through training and an awareness of the essential techniques common to the fastest
sprinters. The development of running speed is not simply a gift of genetics. Speed is a
skill, and it can be learned and developed by athletes at every level of competition.
Our genetic endowments influence everything we do; however, we are not limited to
the level of abilities demonstrated by our ancestors. The depth of performance poten-
tial waiting to be discovered in us all is limited only by our attitudes. The dramatic
improvement of athletic skills and the acquisition of new ones are within the grasp of
any performer. Success is found where coaches demonstrate these expectations for the
athletes they coach.
Regardless of the race distance, the single most important performance component
is speed. When distance runners cross the finish, they are not commended for their
great aerobic capacity. The hurdler doesn’t earn style points for technical merit or
grace of execution. What matters most in races of all distances is the speed demon-
strated from the start to the finish line; therefore, every track athlete should have a
speed development program regardless of his or her event.
In the absence of a team-based speed-development program, excellent sprint prospects
can often be overlooked. Coaches should not expect to see the skill of speed demon-
strated by all of their best candidates for the sprint events before learning has even
begun. If athletes do not show obvious sprinting ability at an early age or on the first
day of training, coaches should not necessarily direct them toward some other event
specialty. Over time, the ability to run faster and to sprint capably can be developed.
Labeling athletes before their training has begun and limiting them to middle-dis-
tance and distance events can be a tragic error.
The Speed Dynamics®
Approach to Sprint Training
SPEED DYNAMICS® is a moniker given to a new philosophy for developing sprint-
ers. The traditional approach to training sprinters has emphasized only one of the

208
C h a p t e r 1 0
Training Sprinters
body’s physiological systems: the muscular system. The assumption has been, “If you
make athletes stronger, they will become faster.” While the importance of strength and
power development should not be understated, strength gains will not produce pro-
portional improvements in speed. In other words, doubling the weight you lift will
not cut your race time in half.
MULTI-TRACK TRAINING
Since many physiological components contribute to faster running, many training tar-
gets demand attention, including:
• Strength and power
• Dynamic mobility
• Neuromuscular coordination
• Event specific skill
• Energy system fitness
Though the primary training emphasis will change from day to day, some attention
should be given to each of these components in every training session. One of these
training targets will require a special daily emphasis.
The nervous system is the single most important contributor to speed. Working as
the body’s control network, the nervous system is responsible for every subtle and
obvious movement the athlete makes. It is the nervous system, which carries the
intricate commands to each muscle, that determines when and in what order muscles
contract. A powerful engine is useless if the ignition wires don’t send the right signal
to the cylinders at the proper time and in the proper order. In the same way, mus-
cular strength is of no benefit if the nervous system does not coordinate its work.
Consequently, training the neuro-muscular system is the foundation to build to high-
level performance.
The neuro-muscular system can be programmed much like a computer. With train-
ing, a coach can create an auto-pilot in the athlete that will guide him or her to faster
finishing times.
The body is an amazingly adaptable mechanism. It will do whatever is asked of
it, provided it is done so in a language it understands. The only programming
language the nervous system understands is repeated rehearsal. As an athlete moves

209
C h a p t e r 1 0
Training Sprinters
through any activity, the body works to make most efficient the muscle sequencing
and firing rate for the chosen activity. As an athlete repeats an action or movement,
the body locks-in the intricate muscle commands responsible for the task.
PRACTICE MAKES PERMANENT
We are all familiar with the cliché “Practice makes perfect.” In the science of speed
development, however, it is more precise to say “Practice makes permanent.” This is
especially true where the neuro-muscular system is concerned. Since the nervous
system cannot distinguish between the results an athlete desires and what an athlete
actually rehearses, it will simply master the movements done most often. So what-
ever is done in training becomes permanently etched into the neuro-muscular system.
Athletes must, therefore, avoid doing lazy drills, lackluster exercise routines, or general
training that strays too far from the movements specific to their event specialty.
REDUCE THE PURSUIT OF SPEED TO A MEASURABLE,
DAILY MISSION
The primary objective, the mission, each day in training should be to reduce, for every
stride taken, the time spent on the ground or in the air by just one one-hundredth of
a second. Whether in the 40-yard dash or the marathon, reducing the time an ahtlete
spends on the ground or the time he or she spends in the air is how gains in speed are
made. Though seemingly incidental increments, the results of such a change will pro-
duce profound improvements in finishing times.
For instance, in the 100-meter dash, as many as 50 strides are required to reach
the finish line. If the time spent on the ground or in the air for each stride taken is
reduced, by just one one-hundredth (0.01) of a second, the improvement at the fin-
ish is a dramatic five-tenths (0.5) of a second. Such an improvement is the difference
between being an average sprinter and a candidate for a college scholarship.
THE WHOLE / PART / WHOLE TEACHING METHOD
When the novice sprinter stands over starting blocks for the first time, the finish-line
can seem to be a very long distance away. During the race, the athlete will experience
many different sensations and demands.
For a sprinter to excel, the race must be broken down into easily learnable parts.
Sprinting is usually thought of in terms of maximum velocity sprinting; however, a

210
C h a p t e r 1 0
Training Sprinters
sprinter’s top speed will last for a very short duration. Over the course of the entire
sprint race, many other significant components can be identified. After all compo-
nents are mastered individually in training, they can be reassembled to produce a suc-
cessful race.
THE NINE COMPONENTS OF THE SPRINT RACE
• The Warm-up
The competition warm-up is often overlooked when evaluating the entire scope of
a sprint race; however, it is essential for optimal performance, readiness and injury
prevention. While the purpose of the competition warm-up is to optimize readiness
for racing, the purpose of a training session warm-up is quite different.
The training session warm-up can be a most effective means of training – not merely
a preparation for training. Later, several different training session methods including
the active-dynamic, the continuous, and the segment variety will be identified.
• The Start
The start is a series of complicated motor skills that, when executed properly, pro-
duce the force necessary to overcome inertia and begin acceleration. Often occur-
ring in less than one second, the start includes reaction time, force application and
the first two running steps.
• Acceleration
This performance phase is the first of two links between the initial movements of
the start and maximum velocity sprinting. The initial eight to ten steps represent
this phase. The sprint mechanics of acceleration are very different from maximum
velocity sprinting. The body position desired here is similar to the posture found
when pushing a car or pulling a sled.
• Transition
This racing phase completes the link to maximum velocity sprinting. It must be
differentiated from pure acceleration because of gradual and subtle mechanical
changes in the running stride. Transition skills are among the last lessons learned by
the developing sprinter.
• Maximum Velocity
Usually achieved after four-to-five seconds of utmost effort, the maximum velocity

211
C h a p t e r 1 0
Training Sprinters
phase of the sprint race is characterized by the highest stride frequency and the
most optimal stride length. The duration of maximum velocity is often as short as
two to three seconds. Maximum Velocity should be the first training focus.
• Speed Maintenance
What some refer to as the deceleration phase, should be refered to as speed mainte-
nance. This is a lesson in neuro-linguistics. Coaches should never suggest to their
sprinters, even subtly, they should expect to slow down at any time in a sprint race!
Rather, the performance objective should be to maintain as much top speed as pos-
sible. Of course, it is likely that a gradual decline in velocity will occur due to vari-
ous elements of fatigue.
• Finishing Form
Many races have been lost or qualifying standards barely missed because of the lack
of finishing technique. Perfecting this skill can reduce a sprinter’s time by that criti-
cal one or two one-hundredths of a second needed for victory.
• Coast and Stop
The truth is the majority of sprinting injuries do not occur at the start or during the
race. All too often, athletes turn off their concentration while passing the finish line
and allow the ground to apply abrupt breaking forces to their legs. Proper coasting
and stopping techniques are essential in preventing post-race trauma and injury.
• Restoration and Recovery
Sprinters are routinely required to run several events during the course of a single
track meet. After the race is run, the sprinter’s work is not finished. It is necessary
to bring the body’s physiological systems back to the basal level quickly and then
effectively prepare for either the next race or tomorrow’s training session.
Testing and Evaluation
It is common for coaches to create a single master training plan for all their sprinters.
Certainly, some commonalties do exist when the training programs of sprinters are
compared; however, only by respecting and addressing the unique qualities and objec-
tives of each athlete can coaches lead an individual towards achieving his or her high-
est levels of performance.

212
C h a p t e r 1 0
Training Sprinters
Just as a physician examines each patient to properly attend to individual needs so must
the coach explore the personal capacities of each athlete under his or her charge. Before
a training program can be developed, coaches should “test for success” and look past
obvious, surface-level data to explore the depths of undiscovered potential. There are
several tests that examine both psychological and physiological performance factors.
PSYCHOLOGICAL EVALUATION
Even if a coach creates a perfect training program to develop the physiological poten-
tial of a particular athlete, little will be accomplished if that athlete’s goals and percep-
tions do not line up with those of the coach. If a coach wants to win a national cham-
pionship, but the athlete is only looking for a better fit of his or her bathing suit, the
conflicting objectives will make for a difficult and unsuccessful relationship.
The evaluation process should begin with the completion of an athlete’s question-
naire. This questionnaire provides a coach with valuable insights that serve to identify
characteristics unique to the athlete. The questionnaire should include sections that
explore relevant statistical, personal, medical and volitional data. By understanding
the unique circumstances surrounding the person, not just the performer, coaches can
match appropriate training methods to individual needs.
STATISTICAL DATA
The survey process should begin with questions such as address, telephone number,
date of birth, grade-point average and college-board scores. Class schedules should also
be noted. It is also helpful to list shoe and uniform sizes in this section. With a master
list of this information on hand, emergency equipment problems can be minimized.
Many more questions of this type can be included in this area of the questionnaire.
One of the most important inquires from this portion of the questionnaire is the
determination of training age. Training age is a measurement of athletic experience
expressed in years. It is determined by totaling the amount of time spent in a struc-
tured athletic program.
The athlete who participates in sport for only three months per year, over a total of
four seasons has a training age of “one.” Though a four-year veteran, a training age of
one-year suggests this athlete is still in athletic infancy. This important characteristic
should greatly influence the training loads prescribed for any performer.

213
C h a p t e r 1 0
Training Sprinters
PERSONAL DATA
This section of the questionnaire examines the home environment, family influences,
personal achievements and employment status of the individual. It should be deter-
mined if one or both parents are in the home, or if the athlete lives with other rela-
tives. How many brothers and sisters does the athlete have and what are their ages?
Are the athlete's parents or siblings athletes? Does the athlete have a nickname? Is the
athlete a member of any clubs or organizations? Does the athlete have a part-time job?
Other areas of the athlete’s life that may have provided opportunities for success should
be explored. Has the athlete earned any awards in academics, art and drama or in other
sports? This data serves to identify the intangible qualities the athlete may possess as
demonstrated in other activities. Demonstrated qualities such as determination, dedica-
tion, persistence, loyalty and other virtues can transfer to any athletic endeavor.
MEDICAL DATA
A medical history should be included in this questionnaire. The family doctor’s name,
date of last examination, any prescribed medications and allergies should be listed.
Any injuries, especially those suffered in athletics, should be documented with their
diagnosis, therapy and current status.
VOLITIONAL DATA
Volition is defined as “The act or power of the will.” This section should attempt to
discover the motivation, tolerance and objectives of the athlete. It is best to begin by
simply asking, “Why are you here?” The wide range of responses to this question may
be a surprise. Some athletes participate because they are looking to earn a scholar-
ship, while others are attracted to being part of a team. Others may be compelled to
participate by pressure from their parents and friends. They may have joined the team
simply out of love for the sport or to improve their fitness. And of course, there are
always those who are not really sure why they signed up! Perhaps they stumbled in by
chance or out of curiosity.
Novice athletes who are unconvinced of their athletic potential will demand a special
rapport with the coach. The athletic infancy of a novice will require not only reduced
training loads, but special encouragement as well. The experienced athlete with state-
meet aspirations will likely have a very different relationship with the coach, as well as
significantly more challenging workloads.

214
C h a p t e r 1 0
Training Sprinters
FIELD TESTS
The test course will consist of an acceleration zone and a 30-meter timing zone.
Novice athletes should use a 15-meter acceleration zone, while more accomplished
athletes can use a fly zone of 20 to 25 meters.
15 - 20m 30 m
- - - - - - - - - - -- - - - - - - - - —————————
ACCELERATION ZONE TIMING ZONE
• Evaluating Maximum Velocity
The 30-meter fly test evaluates the maximum velocity capacity of the athlete.
The athlete is instructed to sprint through the acceleration zone and the 30-meter
action zone with maximum effort. He or she is timed, however, only from the start
of the 30-meter test zone to its finish.
When the distance run (30 meters) is divided by the time recorded, the answer
reveals the maximum velocity of the athlete in terms of meters-per-second (the
number of meters traveled in one second, while sprinting at full speed). If the split
time were 3.0 seconds in the fly 30 test, the maximum velocity of the performer
would be 10.0 meters-per-second.
To date, the world’s fastest men and women have posted top marks of 12 and 10
meters-per-second respectively. Developing athletes will register values close to 10
meters-per-second for boys and 8 meters-per-second for girls.
• Evaluating Acceleration
Acceleration skills can be evaluated by conducting a standing 30-meter dash.
Athletes should be instructed to sprint from the start of the 30-meter timing zone
through the finish beginning from an upright, standing start. The watch should
be started from the instant the rear foot leaves the ground, and stopped when the
torso crosses the end of the timing zone. Only experienced athletes of at least col-
lege-level should use a crouched start for this test.
The acceleration skills of an athlete can be judged by reviewing the differences
in performance between the 30-meter fly test and the standing 30-meter test.
Subtracting the fly 30-meter time from the standing 30-meter time reveals the
acceleration differential. Accomplished sprinters will register a 1.0 second differen-
tial, while a developing athlete’s mark will fall into the 1.4 to 1.6 range. Lowering
this differential is the best evidence of improvement in the acceleration phase.

215
C h a p t e r 1 0
Training Sprinters
• Evaluating Sprint Endurance
Sprint endurance can be determined by adding a second 30-meters to the existing
timing zone for a 60-meter fly test. Athletes should be instructed to sprint through
the acceleration zone and both 30-meter timing zones. The test effort should
include a split time at 30-meters and a finish time at 60-meters.
Sprint endurance can be evaluated by comparing the performance times recorded
in both 30-meter test zones. If the first 30-meters was covered in 3.0 seconds, the
second zone should measure no more than 3.09 seconds for the elite sprinter (a 3%
variance). Developing sprinters may show a differential between the 30-meter splits
of 5 - 6%.
• Evaluating Speed Endurance
The objective here is to measure the athlete’s resistance to fatigue with a block-start
or standing 150-meter test run. From the recorded time, the mean or average veloc-
ity run over this distance can be calculated by dividing 150 meters by the finish time.
If the athlete posts a mark of 20 seconds, the mean velocity is 7.5 meters-per-second.
A primary training objective should be to narrow the gap between a sprinter’s
mean and maximum. If the athlete has shown a maximum velocity of 10 meters-
per-second and a speed endurance mean velocity of 7.5 meters-per-second, we can
conclude that the athlete’s current speed endurance capacity is 75% of maximum
speed. We will want to increase this percentage through training.
• Evaluating Special Endurance
Special endurance can be evaluated by conducting a timed 300-meter run. Special
endurance reflects an important metabolic capacity of the sprinter. Once again,
the mean velocity is calculated. For example, if the athlete’s time was 40 seconds,
the mean velocity for special endurance is 7.5 meters-per-second. If the maximum
velocity of the athlete measured 10 meters-per-second, we can conclude that the
special endurance of the individual is 75%. Again, we will want to increase this
value through training.
Measuring Aerobic Capacity
Aerobic or work capacity refers to the amount of work an athlete is capable of pro-
ducing. We can also identify the capability of expanding a sprinter’s range of perfor-

216
C h a p t e r 1 0
Training Sprinters
mance to include middle-distance events with this test. The simplest aerobic capacity
test is a 12-minute run recording the total distance covered during that time.
Developing athletes will typically travel 2200 to 2600 meters (5.5 to 6.5 laps of a
400m track) in 12-minutes. Accomplished sprinters will cover 2800 to 3200 meters
(7-8 laps) in this test. This test is most appropriate, however, for the developing ath-
lete. The results of this run should also be expressed in terms of the mean velocity
achieved. For example, if the athlete covers a distance of 2400 meters during a 12-
minute run, endurance capacity is : 2400 meters divided by 720 seconds (12-minutes)
= 3.33 meters-per-second.
This mean or average velocity should then be used to evaluate current endurance
capacity and to measure improvements over time.
• Measuring Elastic Strength
The vertical-jump test measures elastic strength. From a squat jump, the athlete
extends vertically covering as great a vertical distance as possible. The jump height
can be calculated by attaching a measuring tape to a wall. The athlete should begin
with arms outstretched overhead and noting the starting point. When the jump is
executed, total distance covered above the starting mark is recorded. It is essential
that both arms reach upward simultaneously to assure consistent results.
A developing female athlete will record marks between 46cm and 56cm, while her
elite counterpart will tally 61cm to 71cm. The developing male will demonstrate
61cm to 66cm, while the elite male will post a jump of 71cm to 82cm.
• Evaluating Elastic Power
The 5-stride bounding test will provide insights into an athlete’s power capacity.
The athlete should be instructed to stand with feet aligned, and starting off both
feet, to bound forward for a total of 5-strides. The object is to span as great a dis-
tance as possible. The best bounders will show high levels of negative foot speed,
stable joint systems, and little front/side distance at landing.
Expect developing women athletes to show marks of 11.5 meters to 12.8 meters,
while elite women will show a range of 12.8 meters to 14 meters. Developing men
will bound between 12 meters and 13.5 meters, while elite men will post bounds of
14 meters to 15 meters.

217
C h a p t e r 1 0
Training Sprinters
Coaching the Mechanics of Sprinting
The process of achieving faster sprint times begins with training to improve the
sprinting mechanics of the athlete. This can be achieved through carefully choreo-
graphed drills. With repeated rehearsal, these sprint drills will create permanent pat-
terns of movement which work like an auto-pilot for the sprinter.
DORSIFLEXION
A key principal to understand is the importance of dorsiflexing the foot (pulling the
toe-up) while sprinting. A visible technique in all great sprinters, this important joint
position is exhibited throughout proper mechanics. It can be demonstrated with this
exercise: Raise your arm as if to flex your biceps, but keep the muscle relaxed. Place
your free hand on its bicep. Now turn your wrist-in (the “walk-like-an-Egyptian” pose).
What happens to the muscle? It seems to disappear. Now turn your wrist back to its
original position. The biceps comes back to life! This exercise illustrates how joint
positions determine muscle recruitment. If your wrist is in the wrong position, your
bicep simply turns off and is useless to you.
In the same way, ankle positions determine which muscles are active during running.
When the ankle is dorsiflexed so the toes are pulled up, you can feel the gastrocnemius
(calf) muscle go to work. When functioning, it allows an athlete to pull the leg through
the recovery phase (heel-to-butt) in less time during the running stride. The result is
less time wasted in the air; therefore, a key mechanical principle in running at any
speed is keeping the toe up! When that same leg reaches to land on the next stride, once
again the ankle should be dorsiflexed. With the toe-up at landing, the ankle works like
a spring-board and muscle elasticity moves the athlete off the ground in less time. Less
time on the ground or in the air gets every runner to the finish line faster.
DRILLS FOR SPEED
• Ankling Drill
Objectives: To limit time spent on the ground and to develop an elastic
response in the ankle joint.
Beginning with a walk, with each small step taken, step no higher than the top of
the opposite ankle. Emphasize the ankles remaining dorsiflexed throughout the drill.
The look of the drill is that of a quick-shuffle action. As tempo increases, an elastic
response in the ankle increases. Arms and legs should be active with the elbows

218
C h a p t e r 1 0
Training Sprinters
loosely positioned at 90-degrees. In ankling, horizontal speed is insignificant. The
focus is on limiting the time spent on the ground. Athletes should be instructed to
listen to their steps and try not to make a scuffing noise with their shoes.
Verbal Cues: “toes up,” “quick feet,” “hot ground,” “fast shuffle,” “spring-board
action.”
• High-Knee Butt-Kick Drill
Objective: To reduce the time necessary for recovering the foot from the ground
to the buttocks by using the gastrocnemius muscle to fold the calf tightly against
the hamstrings.
The technical focus of the butt-kick drill is the ankle, which should be dorsiflexed
throughout the exercise. Beginning with a jog, proper ankle position should be
maintained as the heels quickly fold-up under the buttocks. A contact “slap” should
be audible. Special care should be taken to ensure the knee is lifted and the thigh
approaches a parallel position as each heel slaps underneath the buttock. Once
again, avoiding scuffing the running surface is key. This drill is an excellent exer-
cise to simultaneously improve a sprinter’s arm-action by driving the elbows back
quickly in sync with the legs.
Verbal Cues: “elbows back,” “toes up,” "heels up," “hands like hammers.”
• “A” Drills
Objective: To improve efficiency of movement and to establish the best mechanical
position in which to begin the next stride.
The names we tend to give exercises can distract us from proper execution. “High-
knee Drills” are perhaps the best example. Getting the knee high isn’t sufficient;
therefore, the “A” series avoids any confusion with the use of a generic name. In the
“A” Drill, the toe, heel and knees should come up simultaneously. The calf should
be kept tightly folded against the hamstrings and thigh parallel to the ground as
the foot steps over the opposite knee. To complete the stride cycle, the thigh is then
driven back down to and then past the perpendicular position at landing and the
foot pulls the ground back underneath the hips.
The “A” Drill should begin with a march. As skill increases, the march can tran-
sition into a skip and then a run. The shoulders should remain above the hips

219
C h a p t e r 1 0
Training Sprinters
throughout the "A" drill, and the athlete should avoid tilting the pelvis back like a
drum major to make it easier to lift the knees.
Verbal Cues: “toe up-heel up-knee up”, “step-over the opposite knee.”
• Fast Claw Drill
Objective: To re-pattern neuro-muscular movements and create improved vertical
leg speed.
This exercise is performed one leg at a time. It begins with the athlete standing
erect with the thigh of the active leg blocked in a parallel position, the toe should
be up and ankle cocked, and the heel of the support leg off the ground. To begin,
the thigh is driven down to a perpendicular position as fast as possible, and the foot
recovered back up as quickly as possible. The knee joint remains loose allowing the
lower leg to swing out naturally. The cyclical action used in previous drills applies
here. The Fast Claw Drill can be performed continuously, for a designated number
of repetitions or on command.
• “B” Drills
Objective: To reduce breaking forces at ground contact by generating high levels of
negative (backward) foot speed. (Can also be used to simulate the sensation of hurdle
clearance.)
The single characteristic that most distinguishes developing sprinters from elite
sprinters is the ability to produce negative foot speed. This exercise allows athletes
to experience the sensation of pulling the running surface back underneath them.
When this negative or backward foot speed is at least equal to the velocity of the
hips traveling forward, little deceleration occurs as the foot lands.
The “B” Drill begins with the same action as the “A” series with the toe-up, heel-
up, knee-up and the foot stepping over the opposite knee. When the thigh blocks
in a parallel position, it should be quickly re-accelerated back to a support stance.
In the “A” series of drills, the speed of the leg through the stride cycle is the same.
In the “B” Drill, the speed of thigh driving back toward the ground is noticeably
faster than the recovery action. The front-side movement dominates the exercise.
Contrary to popular opinion, it is not necessary for the sprinter to try to kick-out

220
C h a p t e r 1 0
Training Sprinters
the lower leg in front of him or her. This action will occur naturally as a result of
the quick change of direction in the thigh position.
Unlike the “A” series, “B” Drills should begin with a full skip and progress to the
march that requires high levels of strength, flexibility and skill. The full series of “B”
Drills includes a full skip with both legs active, a single-leg “B” skip, a “B” run and a
“B” march.
Verbal Cues: “step over,” “drive the thigh,” “grab back.”
• Straight-Leg Shuffle
Objectives: To develop high levels of negative foot-speed and increase specific
strength in the hamstrings and gluteus.
In this exercise, athletes should be told to forget they have a knee joint. Keeping
the toes up, ankles dorsiflexed and shoulders positioned in front of the hips, the leg
swings straight out, then quickly changes direction and drives back into the running
surface. Athletes should feel the hips projected forward as they attempt to pull the
ground back underneath them. Once the basic movement is mastered, the straight-
leg shuffle can evolve into a straight-leg bounding action by applying greater negative
force at each landing. Proper running posture should always be maintained.
Verbal Cues: “tear back the track,” “pop the hips through.”
Coaching the Maximum Velocity Phase
Seeking improvements in the maximum velocity of the athlete should be the first
training focus with sprinters. Gains in this performance phase are the foundation of
success in sprinting. Though the duration of this segment of a sprint race is often
only two to four seconds, its impact on the finishing result is profound. The training
objective is to break through the dynamic stereotypes which limit performance and
create new, improved motor patterns in the athlete. These new motor patterns will
result in improved efficiency of movement, mechanical gains in force output, and a
reduction in time spent on the ground and in the air.
In strength training, we understand that as an athlete’s maximum capacity increases,
every other degree of strength will benefit as well. Just as we design training in the

221
C h a p t e r 1 0
Training Sprinters
weight-room based on a percentage of an athlete’s maximum strength capacity, so
should we address speed development. With improvements in our sprinters’ maxi-
mum velocity, measurable benefits will filter down to all their other movement skills.
Since the maximum speed capacity of an athlete relies less on strength and power than
other racing phases do, it makes sense to begin this training early in the season when
strength is lacking. This begins with the most important drills the sprinter will ever
perform.
FAST-LEG DRILLS
Objectives: To develop vertical leg-speed and neuromuscular coordination. This series
is designed to improve the maximum speed of the athlete without any emphasis on
horizontal movement. Here the focus is on improving the vertical component of
sprinting.
• Four-Step Fast-Leg Drill
Horizontal speed is unimportant so this drill should begin with a slow jog, recov-
ering one leg only, up as quickly as possible and back down again four times as
quickly as possible. As always, emphasize “toe-up, heel-up, knee-up, step-over-the-
opposite-knee.” The sprinter should feel as if he is leaving the support leg behind,
never stepping forward with it. This drill is performed with sets of four repeti-
tions separated with a few jogging strides using one active leg over a distance of 30
meters, and returning to the starting point drilling the other leg. It can progress to
distances of 50 to 70 meters.
• Alternate Fast-Leg Drill
Once both the left and right side fast-leg drills are mastered individually, the skill
can be enhanced with an alternate fast-leg routine by taking two steps and fast-
leg the other side. As skill increases, the jog progresses into a moderate run. The
legs should function autonomously from the upper body. No jerking of the torso
should occur during the fast-leg action.
• Continuous Fast-Leg Drill
Instruct athletes to imagine one leg is dragging a weight from the ankle. (The sensa-
tion is not unlike wearing a ball-and-chain as a prisoner might.) The drill starts with a
walk, with the support leg lagging behind, and fast-leg action on the other side on
every stride. Balance is maintained by keeping the arms and legs synchronized.

222
C h a p t e r 1 0
Training Sprinters
• Command Fast-Leg Drill
In this drill athletes move in a slow jog down the track. The coach shouts the
number of fast-legs to be performed in a consecutive effort. The athlete performs
the quota, and then returns to a jog waiting for the next number of fast-legs to be
performed. One, two or three reps are appropriate. The side on which the fast-leg
is performed can also be designated, along with the number of reps desired, e.g. “2
left... 1 right... 3 right.”
• Complex Fast-Leg Drills
You can further enhance fast-leg skills by using the routine with other drills like
ankling, butt-kicks and straight-leg bounding.
TRAINING AT SPEED
“Speed-work,” as commonly defined, does not fit into the Speed Dynamics® philoso-
phy. Traditional speed-work sessions with bouts of 10-to-30 second runs do not rep-
licate the actual short duration of maximum velocity sprinting. Since the neuromus-
cular system can only fire at maximum levels for only two to three seconds at a time,
speed work for sprinters must reflect this reality.
• Fly-In Sprints
Fly-in sprinting is an excellent training tool to develop maximum speed. The train-
ing course should consist of a “fly” or acceleration zone of 15 to 25 meters, and an
“action zone” of 20 to 40 meters marked with traffic cones or hurdles on either
side of the dedicated lane(s). The objective of these fly-in sprints is to capture the
maximum velocity phase of the sprinter’s race so specific improvements can be made.
The speed of the run increases gradually through the fly zone as the action zone is
approached. The action zone represents the maximum velocity phase of a sprint race.
Transit time through the action zone should never be more than 2 to 4 seconds.
The length of the action-zone should be based on the maximum velocity capac-
ity of the athlete as measured in the fly 30-meter test. The developing sprinter
will typically begin training with an action-zone of 20 meters. More accomplished
sprinters can utilize a 30-meter action-zone. In time, the length of these respective
zones can increase to 30 meters for the developing sprinter and 40 meters for the
accomplished sprinter.

223
C h a p t e r 1 0
Training Sprinters
During acceleration, the sprinter should breath normally, but when the action zone
is reached, the athlete should hold his or her breath for the first four to six strides
and sprint as fast as possible through the end of the action zone.
The coach should always cue the specific mechanics desired during maximum
velocity sprinting. Since the time available to cue the athlete and prompt a response
is short, cues should be composed of no more than two words or syllables. “Toe
up,” “step over,” “grab back” are best.
• Breath Control
One of the unusual nuances of this training is the breath control previously
described. Research has shown holding one’s breath actually increases the ability to
apply force. This action, which has been traced back to the “fight or flight reflex” of
our ancient ancestors, causes physiological changes advantageous to explosive move-
ment to take place. Evidence suggests that instinctively, we have always been aware
of this advantage. From the attempt to pry loose the stubborn lid on a jar, to the
Herculean effort of a maximum lift in the weight room, holding one’s breath makes
the task easier to perform by increasing thoracic and interabdominal pressure which
acts as an “air-splint” for the spine. Stabilization of the spine improves the ability to
apply force. Furthermore, research shows that breath control increases intra-cranial
blood pressure, which leads to an improved ability to recruit motor units.
In short, the ability to apply big forces to the track improves when holding the
breath; however, breath control is useful only if it can be implemented practically.
The use of breath control in fly-in sprints and the Ins-and-Outs training to be
discussed later, will lay the foundation for a new race model over the course of the
season. This model will allow new sprinting skills developed in training to be trans-
ferred to competitive sprinting.
Another advantage of using breath control techniques is the improved awareness it
prompts in the sprinter. Holding one’s breath is a dramatic cue that signals the ath-
lete a special focus is now required. It also creates a definite sense of urgency about
reaching the normal breathing check-point. Coaches will find their sprinters will
no longer coast through a sprint session without the attention to detail required for
success in these events.

224
C h a p t e r 1 0
Training Sprinters
• Sets, Reps and Recovery Notes for Maximum Speed Training
Fly-in sprints should be introduced with a single set of three repetitions. As training
continues, this routine can progress towards a total of three sets with three repetitions
in each set. For the developing sprinter, total volume should not exceed 500 meters
per week. For the accomplished sprinter, 800 to 900 meters per week is appropriate.
Recovery times for metabolic training have long been the subject of debate. For
speed-work, however, full recovery is appropriate regardless of the period of season.
The operative word here is speed. When speed-development is the goal, full recov-
ery is required between bouts of running. Energy system training is an altogether
different matter.
While the opposite would seem true, the developing sprinter generally requires
less recovery time between repetitions and sets since a young person’s neurological
system is more pliable than an adult. This is because novice athletes have not devel-
oped the ability to fully stress their nervous systems as more accomplished athletes
have. Another consideration for adjustments in recovery time for the developing
athlete is the short attention span typical of this group. Often the novice cannot
maintain training focus through long recovery phases. In this instance, shorter
recoveries may be wise when all is considered.
Two-minutes recovery between reps, and ten minutes between sets, is a good start-
ing point for developing athletes. At the elite level, as much as ten-minutes between
reps and twenty-to-thirty-minutes between sets may be appropriate.
Speed development sessions can be utilized two-to-three times per week. Gains
in the performance of the neuromuscular system, however, are contingent on suf-
ficient time being allotted for recuperation. Coaches should always allow 40 to 72
hours of recovery time between maximum speed-training sessions, depending on
their duration and the training age of the athlete.
Coaches can measure the readiness of the athlete’s neuro-muscular system with a
simple diagnostic test. Just as the endurance athlete tests readiness by monitoring
heart-rate data, the sprinter can judge the status of the neurological system with the
use of a stopwatch. This is done by the athlete starting the watch and immediately
clicking-off as many splits as possible in ten-seconds and noting the range of split-
times registered and their consistency. Typically, the athlete will produce split times

225
C h a p t e r 1 0
Training Sprinters
of .16 to .20 when rested. If the neurological system is fatigued, the split-times
increase and become more inconsistent.
If sufficient recovery of the athlete is in doubt, prior to a speed-training session
this stop-watch test can offer valuable feedback. If the performer shows a marked
increase in the split-times registered from previous trials, it may be wise to post-
pone the speed-work session until the next day.
Acceleration
Once the development of the maximum velocity capacity has begun, the next sprint-
training focus should be improving acceleration. The objective of the acceleration
phase is to reach maximum velocity as quickly and efficiently as possible. The accel-
eration phase, from a mechanical point of view, must be broken down into a “pure
acceleration phase” and a “transition phase.” Pure acceleration begins after the first
two steps out of the blocks, and blends into the transition phase after the tenth or
twelfth step. The duration of the transition phase is typically six to eight strides.
CHARACTERISTICS
The primary characteristics of the pure acceleration phase are the relationship between
the hip and foot of the sprinter. Unlike sprinting at maximum velocity, accelerating
requires the feet of the sprinter to hit the track behind the hips in the earliest strides.
With each additional step, the sprinter assumes a more upright posture. The distance
between the center of mass and base of support continues to lessen until the feet land
directly under the hips.
During acceleration, the joint angles at the hip and knee are much sharper prior to
ground contact when compared to maximum velocity. The direction of forces applied
is more horizontal than vertical in this racing phase. Correct acceleration mechanics
require maximum acceleration of the thigh over its full range of motion, meaning the
knee comes up fully and quickly; however, rahter than the cyclical leg action of top-
speed sprinting, the shins move with a “back and forth” piston-like action in accelera-
tion, and heel recovery remains low.
The knee of the sprinter remains in front of the foot, both in the recovery and drive
phases and the feet remain close to the ground. The corresponding angles of the shin

226
C h a p t e r 1 0
Training Sprinters
and torso should be the same with respect to the ground. The ankle is always cocked
in anticipation of ground contact being made with great force.
Acceleration and maximum velocity not only differ in the direction of the forces
applied to the track but also in the origin of those forces produced. In acceleration,
much of the force is generated from muscle contraction rather than elastic response.
This is true in all events requiring acceleration.
Stride-length in the initial two steps of block-clearance and the ensuing eight to ten
steps of pure acceleration increases at an amazingly regular rate. A range of increase
of 10 to 15 centimeters is not uncommon. A slight decrease in stride-length is found
near the end of the phase. This increment is directly related to the sprinter’s leg-
length and strength and power to body-weight ratios. Surprisingly, stride-frequency
is extremely high for the elite sprinter during the acceleration phase. Here too, we see
an incremental increase in the stride-rate of the athlete. Only in acceleration do we see
stride-rate and stride-frequency increase this way.
IMPROVING ACCELERATION
Coaches can improve acceleration skills of their sprinters in three ways:
1. Give task-specific cues. Offering concise instructions to the athlete will help to
actualize the precise body positions and mechanics sought in this racing phase.
2. Increase the general and specific strength and power capacities of the athlete.
Many different means of training can be utilized to accomplish this objective.
3. Re-program the neuro-muscular system. The precise movements of acceleration-
can be choreographed through specific training and regular rehearsal.
• Task-Specific Cues
Significant study and preparation are required in all areas of a coach’s responsibilities.
Yet, the coaching capacity that may influence sprinters and their performance the
most – coach/athlete communication – is usually the one allotted the least amount
of thought or preparation. The way in which desired results are communicated to the
athlete is perhaps the most important component in the coach – athlete relationship.
The words coaches speak create specific visual images. It is these images that will
prompt action by the athlete. Whatever mental picture the sprinter is provided,
whether it is desirable or not, will be acted upon. Since the mind follows the direc-

227
C h a p t e r 1 0
Training Sprinters
tion of its current thought, the coach must be exact and precise with cues given to
a sprinter.
In training and competition, the athlete should be reminded of the specific motor
responses needed. This reminder is not new information. Instead, the cue will call up
in the mind of the athlete the mental stimulus upon which he or she should act.
Since each racing phase has its own inherently unique characteristics and demands,
the instructions offered to the sprinter must reflect this diversity. Each racing
phase requires its own set of specialized cues.
In contrast to the vague clichés common in coaching jargon, the cues given to
sprinters must describe a specific action which paints a universally recognized pic-
ture. The frequently used cue for acceleration of “stay low” is an example of the
misdirection many coaches inadvertently offer to athletes. This cue provides the
sprinter with a distorted mental image of the body position required in accelera-
tion. Bending at the torso as if ducking under a tree branch is a common but unde-
sirable body position in sprinting. No doubt the “stay-low” cue has much to do
with it. Instead, the sprinter should lift the chest up so a power line is created from
the ankle of the support leg through the torso and head. In this way the body lines
up at about 45-degrees with respect to the track.
More appropriate cues would include “stab back” or “push the track behind you.”
These descriptions relate to the direction of forces and foot placement required for
acceleration. The following recommended drill sequences for acceleration also serve
to emphasize the unique characteristics of this racing phase. The sprint coach is
continually challenged to develop new cues to create the responses he or she seeks.
A coach can signal the high frequency desired in acceleration with cues such as “hot
ground,” “quick feet,” or even generic sounds that emulate the rhythm and tempo
of the reoccurring foot strikes. Hand claps with an ever increasing rhythm, for
instance, make that point.
When sprinters describe how their race is to be run, the words they choose can be
very telling. If their account of the actions of the race is general and nondescript,
coaches can expect this to be reflected in their lack of technical execution on the
track. Athletes should be regularly questioned to determine the state of their tech-
nical understanding of their events.

228
C h a p t e r 1 0
Training Sprinters
If language seems to be failing either the coach or the athlete, pencil and paper can
help. When uncertainty exists regarding the sprinter’s imagery of racing techniques,
ask the athlete to draw stick-figure examples of the desired movements and body
positions throughout the various sprint-racing phases. This transfer of the athlete’s
mental image of technical performance characteristics to paper will give a coach a
clear view into the mind’s eye of that sprinter.
Another method to clarify an athlete’s grasp of specific technical cues and concepts
is to carefully observe how he or she assists younger, inexperienced sprinters. A per-
son can only teach what that person knows, so when one athlete instructs another,
his or her expertise is revealed. Observing the athlete as a teacher is an acid test of
the athlete's technical awareness.
TRAINING FOR GENERAL AND SPECIFIC STRENGTH
The ability to accelerate will improve in direct proportion to gains in strength.
Coaches can increase the general strength and power capacity of the sprinter with
many different means of resistance training. All of these methods are intended to
increase the amount of force the athlete can apply and the integrity of the pillar and
the joint systems, and to limit the time spent on the ground.
Simple jogging is the place to begin. Even a slow jog requires the performer to move
against the resistance of gravity. As a foundation of general conditioning is developed
in an athlete with easy running, a coach can increase the demand on the athlete by
changing the grade of the running surface.
Running up a hill or incline requires the athlete to lift the recovered leg through a
greater range of motion than on a flat surface. The athlete must therefore exert a force
against the ground sufficient to lift the center of mass somewhat higher than normal.
The result is an increase in strength and power where the sprinter needs it most.
Multi-throws training is another excellent means to improve general and specific
strength and power values. “Multi-throws” are exercises which combine movements
through various ranges of motion followed by throwing an implement for distance
using shot puts or medicine balls. One example of a multi-throw routine is the
“between the legs forward throw.” Holding the implement in both hands, the athlete
bends forward and swings the implement back between the legs, then quickly chang-
ing directions, swings it up underhanded for as great a forward distance as possible.

229
C h a p t e r 1 0
Training Sprinters
In this type of exercise, the body mass of the athlete increases by the weight of the
implement held. As that body moves, stressors to the muscular system increase.
Finally, when the ball is launched, a great force must be applied into the ground. The
athlete also must extend into the same body position desired in acceleration. This combi-
nation of increased loading, greater force application, and desirable body position are
all obvious benefits for acceleration training.
Sprinting with a weighted vest or weighted pants is another proven method of
enhancing strength and power. Once again, an increase to the load of the athlete’s
sprint systems is achieved by adding weight. By increasing the mass of the sprinter, it
effectively expands the stimulus to the stretch shortening phenomena. The result is an
improvement in general and specific strength and power accompanied by a reduction
in time spent on the ground.
CHOREOGRAPHING THE MOVEMENTS OF ACCELERATION
As coaches work to improve the strength and power of their sprinters, they must
simultaneously develop the specific skills of the acceleration phase. These skills
are best introduced through the following drills and exercises. Each is designed to
teach proper body-position and the desired direction of forces applied to the track.
Repeated rehearsal of these routines will refine the motor pattern of the athlete to
adapt to the unique demands of this racing phase.
A LEARNING PROGRESSION FOR DEVELOPING
ACCELERATION SKILLS
• Acceleration March Drill
Objective: To teach the desired body position and piston-like movement of the legs.
Start with the athlete standing approximately one-and-one-half meters from a wall
or other stationary object. With the feet fixed in place, have the athlete lean against
the wall placing the hands flat against it. The body position achieved should now
be approximately 45-degrees with respect to the ground.
On the coach's command, the athlete begins to march by recovering one leg up
with the ankle dorsiflexed and knee rising high to a point above waist level. Then
the other leg is similarly recovered while the first is returned to exactly the same
position on the floor. This march should continue for a 10-second interval. The

230
C h a p t e r 1 0
Training Sprinters
pillar should remain in line with the support leg throughout the exercise. The
movement of the legs is not cyclical as is the case in maximum speed running.
Look for a back-and-forth leg action with the knees remaining in front of and
above the ankle at all times.
While this exercise will test pillar strength, it is intended most to familiarize the
athlete with the critically important body position unique to acceleration.
• Wall Sprints:
Objectives: 1) To mimic the sprinting action found in acceleration without fight-
ing the forces of gravity; 2) To improve stride frequency and refine the direction of
forces applied to the track.
Begin by assuming the same position as in the acceleration march drill. The athlete
recovers one leg up into the ready position. This leg should be the same one that
will be positioned in the front pedal of the starting blocks. This “ready” stance
requires the ankle on the recovered leg is dorsiflexed, knee is up above waist height,
and torso is in line with the support leg.
The coach then announces in advance how many total steps are to be taken in suc-
cession. It is recommended to begin with sets of 3-steps. Holding his or her breath,
the athlete sprints through three steps, exhales and holds his/her position. The
instruction for the next set comes right away. Doing three continuous sets is stan-
dard. Once mastery is achieved, 5-steps then 7-steps, etc. can be utilized in each set.
• Continuous Wall Sprints:
Objective: To promote pillar strength, stride rate and energy system fitness while
replicating the movements of acceleration.
Here again, the athlete assumes the same ready position as previously described.
On the coach’s command, the athlete begins to sprint continuously. The focus is on
achieving the highest possible frequency while moving the legs through a complete
range of motion. The duration of exercise begins with five-second intervals. As
competency increases, the time should be increased up to 10-seconds or more.

231
C h a p t e r 1 0
Training Sprinters
PARTNER DRILLS
• Hip Hold:
Objective: To support the athlete so that desired body position and movements of
acceleration can be rehearsed at sprint speeds.
A spotter stands behind and places his or her hands on the hips of the sprinter who
leans forward with a flat back and firm abs. The spotter steadies his or her body
position. On the coach’s command, the sprinter begins to pump his or her legs and
arms in the desired piston-like motion sought in acceleration. The sprinter's body
position is maintained due to the support of the spotter.
After four to ten steps, the sprinter is released and continues to sprint through a
designated distance of 30 meters. Regardless of the number of steps taken, when
the spotter can no longer feel the weight of the sprinter, the spotter lets the sprinter
go. If the spotter cannot feel the weight of the sprinter, the sprinter has lost the
desired body position.
• Face to Face:
Objectives: To increase forces applied to the track and identify when desired body
position is compromised.
In this exercise, the spotter faces the sprinter and supports the forward body-lean of
the sprinter by placing his or her hands on the shoulders of the sprinter, accepting
the sprinter's weight. On cue, the sprinter begins to sprint with proper acceleration
mechanics. Arm action should be encouraged. Total distance is 30 meters. When
the spotter can no longer feel the weight of the athlete, the spotter lets go and steps
aside. The sprinter will likely revert back to old bad habits and allow the legs to
become perpendicular at some point in the exercise.
• Face and Chase:
Objectives: To develop transition skills.
The sprinter begins as in the previous drill. After two to six seconds of action, the
spotter turns away from the sprinter and sprints to the finish 30 meters away. The
sprinter now becomes the pursuer. The goal is to catch the spotter before the finish
line. The spotter of course will attempt to out-sprint the sprinter.

232
C h a p t e r 1 0
Training Sprinters
This exercise becomes a game while addressing several crucial training objectives.
When the spotter turns and runs from the athlete, the resistance the sprinter
worked against ends, as does the artificial support of his or her body position.
Neurologically, the sprint systems respond to the contrasting demands of early
resistance against the spotter and then the full final-sprint without the impedance.
Add to the mix the competition factor between the partners, and the result is an
effective training session for both sprinters.
• Face, Chase and Race:
Objectives: To improve transition skills, pillar strength and energy system fitness.
This final progression in partner drills adds another element to the Face & Chase
routine. Again, designate a start and finish line 30 to 40 meters apart. Begin the
exercise as before. The spotter supports the athlete with spotter's hands on the
sprinter's shoulders. The sprinter drives out against the resistance aggressively. Two
to six seconds after the exercise begins, the spotter turns away from the sprinter and
attempts to run across the finish without being caught from behind.
The new element to this exercise is when the spotter is tagged by the sprinter's
hand, both athletes stop, turn 180-degrees and race back to the starting line. If the
spotter is not caught before reaching the finish, they both turn around after the
spotter reaches the finish line and sprint back to the start line.
Many benefits can be derived from this drill. First, the competitive aspect of the
drill improves its intensity of performance. Second, the sprint systems respond to
the contrasting demands of resistance, braking, change of direction and re-accelera-
tion. Finally, the drill shows that serious training can be achieved in a game-like
setting and that hard work and fun can go together.
THE ACCELERATION LADDER™
Only in acceleration do we see stride-frequency and stride-length improve incremen-
tally. We can improve the acceleration of an athlete by carefully choreographing the
precise movements of this racing phase. The best means to address this neuro-physi-
ological challenge is with a training concept called the ACCELERATION LADDER.
The ACCELERATION LADDER is a collection of ten rungs attached by cords that
identify the approximate spacing of each foot-placement throughout the acceleration

233
C h a p t e r 1 0
Training Sprinters
phase. Sprinting with this training tool will allow for an exact programming of the
neuromuscular system. The rungs (or “sticks”) used in this exercise improve the kines-
thetic awareness of the athlete by allowing them to feel the proper foot placement as it
occurs behind the athlete’s center of mass.
This adjustable tool offers two different settings: The most common setting for a
young or developing athlete is a 40:10 ratio. The second rung or stick is positioned
forty centimeters from the first. Each additional rung is placed at a point that is ten
additional centimeters away. The spacing progresses from 40cm to 50cm, then 60cm,
70cm and so on.
The second setting is appropriate for a taller or more advanced sprinter. This setting is
a 50:15 ratio which follows the same pattern as before. The second rung is positioned
50cm from the first. The third rung then is 65cm from number two, the next rung is
80cm away, and so on.
The exercise begins with the use of five to six rungs. The sprinter places his or her
power-side foot (the foot which is placed forward in the starting blocks) just in front
of the first rung. The shin should be pointed toward the finish line, the torso in-line
with the angle of the shin, the knee should line up in front of the spike plate, and the
arms should hang loose from the shoulders.
It is important to note that at no time should the athlete step on the rung sticks.
Rather the sprinter should drive back into the face of these rungs as a method of
determining exact foot placement. This drill begins with a falling start. Before balance
is lost, the smart-side leg (the leg placed back in the blocks) will quickly recover while
simultaneously extending at the hip on the power side to move the center-of-mass
forward. The emphasis on horizontal motion is critical.
After recovery of the smart-side leg is complete, the hips will be positioned past the
second rung. The second step requires the recovered leg to be driven back down into
the track surface as was rehearsed in each of the preceding drills. The athlete should
be able to feel or sense the second stick or rung just behind the spike plate as ground
contact is made. With each stride, the performer should drive the legs back into the
running surface resulting in a horizontal displacement. As competency increases, addi-
tional rungs can be added to the exercise.

234
C h a p t e r 1 0
Training Sprinters
Repeated rehearsal of this drill will automate the precise movements desired in the
acceleration phase of a sprint race. Even though the actual stride-length of the per-
former may not exactly match the pattern rehearsed, the benefits of the incrementally
increasing steps will translate positively to competition.
The Start
WHO INVENTED THE STARTING BLOCK?
You might think the starting blocks used today were created by a scientist, or coach, or
perhaps an athlete. Wrong! The first starting blocks were produced by a groundskeeper!
In the days before the introduction of synthetic track surfaces, competition was con-
tested on cinder or clay tracks. In order to produce the best start, athletes would dig two
small holes in the track to accommodate the push-off necessary to overcome inertia.
This technique worked well. It did however prove to be quite inconvenient for the man
who was responsible for grooming the track surface. Imagine having to fill those holes
after each race only to have the performers in the next round dig them up again.
The first starting blocks were not created to produce a better start. They were con-
structed to preserve the running surface. The starting blocks utilized today are not
much different from the first models introduced decades ago. The science of optimiz-
ing the use of the blocks, however, has progressed tremendously.
WHERE TO BEGIN
Though the “start” begins a race, training for the sprints should not initially focus on
this racing segment. Starting skills require a great amount of strength and power and
neuro-muscular coordination. Once the athlete has begun to develop some of these
capabilities, then work in and around starting blocks is appropriate.
Before starting skills can be taught, a coach must first determine the power-side and
the smart-side of the athlete. As infants, our neurological development takes on a
distinct pattern. One side of the body becomes the primary mover, while the other
works in support. As a baby eats, one hand brings food to the lips while the other
holds the plate steady. We write with the smart hand and hold the paper steady with
the power-side hand. We kick with our smart-side leg, while the power leg supports
all of the body weight.
Generally, the hand you write with and which foot you kick with represents the

235
C h a p t e r 1 0
Training Sprinters
smart-side of the body. The smart-side foot is placed behind the athlete in the starting
position. The power-side will generate most of the force from the front position.
THE LEARNING PROGRESSION
Starting skills should be introduced with the upright position first, and eventually
evolving towards the crouched start. Repeated studies show that athletes who lack the
strength, power, or technical skill needed for the crouched start will actually produce
slower sprint times with starting blocks than without them! In competition, athletes
should use only those starting skills that have been mastered. This may mandate that
beginning or weaker athletes not use starting blocks initially.
CATEGORY ONE: Falling Starts
The common thread running through this category of drills is the body position
assumed prior to the first movement. The athlete will allow gravity to pull him or
her forward until the torso is at about 55-degrees with respect to the running surface.
As this position is achieved, the athlete explosively begins to sprint and continues
through a distance of at least 20 meters.
• The Upright Falling Start
The power-side foot is positioned just behind the starting line wit the body weight
on the sprinter's shoes spike plate, shin pointing forward so the knee is directly
over the foot. The smart-side shoe grips the surface with the spike plate and is posi-
tioned behind the body. For balance, the arms are in sync with the legs with the
right-hand/left-foot and left-hand/right-foot working in tandem.
With pressure being applied through both the power-side and smart-side spike
plates, the athlete should feel his or her hamstrings and gluteus muscles begin to
fire as he or she allows the body to drift forward. Just before balance is lost, the
athlete should apply maximum forces through both feet and explosively acceler-
ate forward. The skills learned in acceleration training are implemented here. The
breath is held for the first few strides of this starting action. The desired application
of forces is largely horizontal so hip extension on the power-side is critical.
Verbal Cues: “pressure on the spike plates,” “push from the hip.”
• The Squat Falling Start
Assuming the same position as in the last drill with the feet set and arms synchro-

236
C h a p t e r 1 0
Training Sprinters
nized, the hips lower into a squat position. The power-side leg (front leg) should be
bent at the knee in a 90-degree angle, and the forward fall executed as before. As
the desired body position is reached, the athlete should explode into an acceleration
pattern. If athletes find it difficult to explode forward from this “squat” position,
they are unprepared to execute a start from staring blocks in a crouched stance
until additional gains in strength and power can be made.
Verbal Cues: “lower the hips,” “fully extend the power side.”
• The 3-Point Start
Here, the ready position requires the power-side foot to be four to six inches from
the starting line. In the squat stance, the smart-side or forward hand is lowered to
the starting line. A bridge position is created by the hand with its thumb inside and
four fingers held closely together outside. The other hand is placed on the power-
side hip. The athlete begins to fall forward and quickly executes the start sequence
with the smart-side hand thrown back, and the other hand moving up and for-
ward. The power-side leg must push hard and the smart-side leg must press off the
ground quickly.
Verbal Cues: “push, press”, “elbow back.”
• The 4-Point Start
Using the same ready-position as the previous drill, both hands should rest on the
power-side knee, the shoulders dipped to knee-level. The hips remain high and the
athlete should feel the stretch in his power-side hamstring.
At the “set” command, both hands should drop to the starting line. The hands
assume the bridge-position and the distance between the hands should be the
same as the grip-distance in the bench-press exercise. As force is applied against
the ground, through both feet, the shoulders and hands will counteract the forces
applied by the legs, hips and gluteus. Holding his or her breath, the athlete
explodes out with double-leg drive. The sensation is that of a tightly wound spring
that is suddenly freed.
Verbal Cues: “double leg drive,” “chest up.”

237
C h a p t e r 1 0
Training Sprinters
CATEGORY TWO: Standing Starts
Using a “standing start” position from the starting blocks was pioneered early in the
twentieth century and this technique has been used randomly by the generations of
sprinters that have followed. The latest resurgence of this method began in 1988.
Charles Moye developed a starting block specifically designed for a standing start.
It has been used extensively in training and competition on the high school level.
Though the implement is legal on all levels of competition, it has rarely been used in
elite level competition.
Rationale for Using the Standing Start
The “standing start” technique allows most athletes to assume a set-position where the
maximum amount of force can be applied in the least amount of time. Athletes who
can move more weight in less time from a quarter-squat position than a half- or full-
squat in the weight-room should use the standing start. Those who can lift twice their
body weight from a half-squat are well-suited for the crouched start.
Standard starting blocks with adjustable pedals can be set to accommodate the
standing start. However, stability and ease of use is an advantage of the Moye Block
– which was designed only for this technique.
• “Ready” Command Position
The front pedal of a standard set of staring blocks should be set four-to-six inches
from the starting line. The front foot should load (curl) the toes elastically and be
positioned so the shoe is in touch with both the track surface and the block pedal.
The rear-foot shoe should be placed the same way on to the rear block-pedal. Both
hands rest on the front knee – which should not be bent, but merely unlocked. The
shoulders should be lowered to knee-level and the hips remain in a tall position.
• “Set” Command Position
IAAF (International) rules require both hands to be in touch with the ground prior
to the start for all races up to and including 400-meters. National High School
Federation rules, however, have no such requirement; therefore, the high school
sprinter can use a 3-point “set” stance. The benefits of the 3-point stance include
one hand being free to hold a baton comfortably along with less flexibility being
required to maintain that position. The 4-point stance allows more force to be
applied prior to the start, which is required to reduce block-clearance time.

238
C h a p t e r 1 0
Training Sprinters
At the set command, in the 3-point start the smart-side hand is placed on the
track surface, and the other hand on the hip. In the 4-point start, both hands are
in touch with the track in a bridge position, bench-press grip distance apart. Force
should be applied through both feet, keeping the hips high and holding that last
breath until the fourth step in the acceleration pattern.
CATEGORY THREE: The Crouched Start
The pedals on the starting blocks should be positioned so the power-side pedal is in
front, and the smart-side pedal is back. Each athlete should begin with the front pedal
placed approximately two heel-to-toe foot lengths from the starting line, and the rear
pedal positioned approximately one foot length from the front block. This simple
guideline is usually quite accurate due to the relationship between an athlete’s leg
length and shoe size – a ratio which is remarkably consistent in all humans.
Facing the finish-line, the athlete should squat down and back into the blocks as if
loading a spring. The spike-plates of both shoes should share contact both with the
track surface and the block-pedals so the resulting “curling” of the toes creates an elas-
tic response. The hands are once again placed in a bridge position, bench-press grip
apart. The head should neither arch back nor hang low, but rather should remain in
alignment with the back. Eyes should be focused straight at the starting line, and the
area at the base of the neck and between the shoulder blades should be pressed upward.
• Set Command
The athlete should inhale and hold his or her breath as pressure is applied equally
to both block pedals. The athlete then lifts the hips up and locks into the set posi-
tion by countering the force of the legs, hips and gluteus with the use of the shoul-
ders, arms and hands. The hips should be raised in a methodical, controlled man-
ner to avoid a loss of balance.

It is natural for inexperienced sprinters to load up the leg in the front block and apply
very little pressure to the rear leg. Coaches should make sure to correct this tendency
early. If the muscles of the power leg are substantially pre-contracted in an isometric
fashion, the resulting subsequent contraction at the gun will be slowed. Additionally,
applying force to both blocks equally rather than simply stepping out with the back
leg decreases block clearance time and provides for a more explosive start.

239
C h a p t e r 1 0
Training Sprinters
In order to mitigate this common mistake, coaches can instruct athletes to use pri-
marily the muscles of their rear leg in order to elevate the hips into the set position.
In this way, adequate pressure is applied to the rear block. As the completed set posi-
tion is achieved, the strongest athletes will show a 90-degree angle at the knee on the
power-side leg. Developing athletes should allow for a more open angle stance.
• Block Clearance
At the gun, many actions must occur simultaneously. The sprinter should continue
to hold his or her breath so maximum forces can be applied to press off of the
back block pedal and quickly recover the smart-leg. The back heel should depress
against the block explosively, and the back foot should then slingshot forward, stay-
ing low and close to the track. The power-side leg executes complete hip extension
that thrusts the body forward. The angle of the power-side leg should is about 45-
degrees when fully extended. Full hip-extension is critical.
While the power-side foot is pushing off, the smart-side arm is thrown back, palm
up and extended at the elbow. The opposite arm should come up and forward and
rise as the chest rises upward. The power-side arm will take a position just above
the head as if shading the eyes from the sun.
When fully recovered, the smart-side foot is driven back into the track surface.
It should land approximately five foot-lengths forward from the rear pedal of the
blocks with the hips positioned directly above the foot. Extension of the smart-side
hip then begins while the power-side leg is recovered. In the strides that follow, the
skills learned in the Acceleration Ladder training will be implemented.
The Finish
Finish technique is a skill that should be taught, developed and practiced. Acquiring
this skill can often make the difference between winning and losing a sprint race.
Here are two finish techniques that should be rehearsed often in training.
• The Trip Finish
Within five meters of the finish line, the sprinter throws both arms back, with
palms up. The arms should approach a parallel position to the track surface. The

240
C h a p t e r 1 0
Training Sprinters
head is turned to one side or the other so the ear is flat to the track. The top of the
head points across the finish. This unique body position forces the torso forward
projecting it across the finish line. The athlete must continue to drive through the
finish line holding this position.
• The Swim Finish
This technique requires the sprinter to mimic a swim-like side-stroke two strides
from the finish. The forward arm is the arm which is furthest from the auto-timing
camera. The head turns and looks in the direction of the camera. The other arm
is thrown backward. This body position rotates the torso just enough to provide a
bigger target for the finish photo. The Swim Finish is recommended for use when
the competitors are expected to be closely bunched at the finish. This is most often
true in indoor competition for the short sprint events.
Finish form should be rehearsed every time starts are practiced by setting a finish line
at about twenty meters from the start. Rather than leisurely coasting to a stop after a
trial repetition from the starting blocks, athletes should blast through the finish line
using the technique prescribed by the coach. Hundreds of finish rehearsals can be
practiced during the course of the training season this way.
Coaching the Relays
4 X 100 METER RELAY
The primary objective of the 400m relay is to move the baton around the track as fast
as possible. Having great sprinters means nothing if the baton is not passed efficiently
without a loss of speed. The goal is to maximize the speed of the baton – the speed of
the runners only serves that purpose.
Team Selection
The six best sprinters on a team, regardless of event specialty, should be the group from
which the four members of a 4 x 100m relay are chosen from meet to meet. "Coach-
ability" and the willingness to practice baton exchanges are prerequisites for 4 x 100m
relay runners.
Placement of Individuals
1st Leg. Coaches should look for a good, experienced starter and curve runner to run
the first leg. Athletes of smaller stature with high turnover frequency usually have an
advantage in combating the centrifugal force generated by running the curve. The

241
C h a p t e r 1 0
Training Sprinters
fastest sprinter on the team might be considered for this position for two reasons: (1)
developing a sizeable lead on the first leg puts considerable psychological pressure on
opponents who must then play “catch-up,” and (2) if the baton is passed well into the
zone (as discussed later), this runner has the opportunity to run further with the baton
at optimal speed than any other leg. This is also a preferable spot for a runner who
does not receive the baton well.
2nd Leg. This leg is run almost entirely on the straight, and many accomplished
teams place their fastest runner in the second position. A taller, lankier sprinter who
might have trouble running a tight curve might be considered here. Coaches should
look for a runner who both receives and passes the baton well. Since the baton is
received and carried in the left hand on this leg, this position is a natural fit for a left-
handed athlete.
3rd Leg. Ideally this should be both a team's best curve runner and its best baton
handler. Mishandling the baton on the third leg spells defeat in the 400m relay.
4th Leg. Although the anchor leg has traditionally been reserved for the team’s fast-
est sprinter, this may not always be the best choice. In fact, if the exchange is made
beyond the midpoint of the zone as desired, this runner actually runs the shortest dis-
tance with the baton in his or her hand. This athlete should be your best competitor.
He or she must handle the pressure of anchoring, have the competitive spirit to close
a gap, and have a strong enough ego to deal with being caught and passed on occa-
sion. Again, since this leg is run primarily on the straight, runners who are taller in
stature would benefit from placement here.
Passing the Baton
There are several different methods of passing the baton for the 400m relay – the two
primary among them are the alternating upsweep pass and the alternating down-
ward exchange. Each of these techniques, both of which have been used effectively in
international competition, will be outlined here.
The alternating downward exchange is the most common baton passing method; how-
ever, a slightly modified version of the alternating upsweep pass should be considered
due to its proven advantages of speed, mechanics and consistency.
For the overhand pass to work well, the two sprinters must mesh at one exact moment.

242
C h a p t e r 1 0
Training Sprinters
This places a tremendous demand for accuracy on anxious and tired young runners
who are moving at full speed with full physical effort. As coaches see time and again,
dropped passes are common with this method. The record of USA relay teams in inter-
national competition over the years should be sufficient evidence. This country’s suc-
cesses have been more the result of having far better sprinters than the rest of the world
rather than superior baton passing.
Although the downward exchange is the most commonly used passing method, we
prefer a variation of the alternating upsweep pass. Certainly, the downward or over-
hand pass is used widely, apparently adds some free distance, seems quick in its
execution, and possesses the pizzazz of verbal commands with its ubiquitous “stick.”
In fact, we believe it is an inferior method of passing.
• A quick downward slap, or flick, of the baton doesn’t mean the exchange is keeping
the baton moving fast. Once the incoming runner reaches out with the baton, he
or she slows down because good sprint mechanics have been abandoned. The out-
going runner does the same with the added inhibition of leaning forward, thereby
slowing acceleration. If the initial passing attempt is missed, both runners are
forced to slow considerably in order to pass the baton within the exchange zone.
• Many runners like the overhand exchange because it is comfortable and closer
to eye level. As with the sprint start, comfort doesn’t indicate proper mechanics.
Hitting an open, waving hand at full speed with a baton moving down and back
is very difficult; moreover, the receiving hand is in poor position to easily grab the
baton. A hand in this position is rigid, meaning the baton is likely to hit the wrist
or butt of the palm rather than the soft crease of the thumb and index finger. In
addition, an arm extended backward and held up to shoulder height tends to move
around as the sprinter accelerates; furthermore, trying to hold the arm motionless
inhibits sprinting.
Nonetheless, sprinters think the slap of the baton with its accompanying verbal
commands is fast. This is usually the case until the baton tumbles onto the track
with its familiar ringing sound.
• Many advocates of the overhand pass point to the "free distance" gained by passing at
full arm extension; however, unless the pass occurs instantaneously at full speed, any
gains in distance are more than offset by the negative mechanics of running with a
fully extended arm. Although it might not be apparent to the eye, runners, and con-
sequently, the speed of the baton, slow significantly upon the extension of the arm.

243
C h a p t e r 1 0
Training Sprinters
Furthermore, the downward exchange cannot be accomplished without some space
between runners. The result of this is the incoming runner tends to back off as
the exchange approaches, adjusting his or her speed so an adequate cushion of “free
distance” can be manufactured in order to make a comfortable and safe pass. This
deceleration results in the slowing of the linear velocity of the baton at the most
critical juncture of the event.
The Alternating Upsweep Pass
From the facts presented above, it should be clear the alternating upsweep pass is supe-
rior to the overhand pass. The particular version presented here is actually called “the
alternating, underhand, upsweep, straight-tube, twist pass” (see John Tansley’s article,
Track Technique, Winter 1991, #114). While the term is certainly a mouthful, its
premise and execution are simple.
The upsweep pass has two overwhelming advantages. Its mechanics allow the baton
to be passed with greater accuracy and with less chance of the baton being dropped.
Because of this increased margin of safety, the baton can be passed at greater speed
later in the exchange zone. These advantages meet the specific requirement of the
event – to get the baton around the track as quickly as possible.
In comparison, the more fragile structure of the downward exchange requires the
baton to be passed earlier in the zone at lower speed. The upsweep pass, done correct-
ly, allows the baton to be passed safely in the last half of the zone when both runners
are at high speed.
Here is an examination of the upsweep pass.
Alternating. As with the downward exchange, the baton is passed right hand to left
hand to right hand to left hand. This allows the first and third legs to run close to the
curve, eliminates switching the baton from one hand to the other, and helps avoid
trouble if the sprinters run-up on each other. The baton always travels down the cen-
ter of the lane.
Underhand. The underhand pass is achieved as the outgoing runner’s arm comes
back in a natural sprinting motion, with the elbow bent between 100- and 120-
degrees and the wrist cocked upward. It is important to note the receiving arm is
not fully straightened and the wrist is dorsiflexed so the palm is more or less parallel
The Alternating Upsweep Pass

244
C h a p t e r 1 0
Training Sprinters
to the track surface. The hand is held open so a “V” is created at the juncture of the
thumb and foefinger.
An underhand pass has several distinct benefits. First, an object put into a hand held
palm down closes almost automatically. In fact, babies are born with a primitive
reflex that closes the hand when something is pressed onto the crease of the palm.
Second, the outgoing runner presents a more stable target with the hand held down.
Third, and most important, an underhand pass enables both runners to run through
the zone with strong sprint mechanics. This allows the incoming runner to maintain
speed and the outgoing runner to accelerate fully.
Upsweep. This pass is initiated with an upsweep motion that occurs naturally with
the foreswing of the runner’s arm. Proper sprint mechanics are maintained, and
the incoming runner does not lose speed by reaching far out with the arm. Even if
the incoming runner “runs up the back” of the outgoing runner, the baton can still
be passed at full speed; moreover, if the initial pass is missed, it does not break the
passer’s sprint rhythm. In the 1988 Olympic final, the Soviet relay team, using an
upsweep pass, missed initial pass attempts yet still won because speed was maintained
throughout the zone.
Straight-Tube. With an underhand pass, the baton does not turn end-over-end with
each pass. Because of this, outgoing runners may grip the baton in the middle or at the
lead end, leaving little of the baton extending for the subsequent exchange. This aspect
of the underhand pass makes it necessary to incorporate the “twist” feature below.
Twist. One of the unique features of this passing method, albeit one that can also be
used with an overhand method, is the twisting of the baton up in the hand after the
pass. This allows the runner to receive any part of the baton without having to tap it
against the body. Usually, it only takes two or three simple twists of the thumb and
fingers to put the baton in the hand properly. Although some coaches will be dubi-
ous, the centrifugal force of the arm action actually makes this quite easy. Try it for
yourself. This action can be rehearsed daily by relay runners during their warm-up
routines. One helpful way to facilitate this “rehearsal” and, in fact, make all potential
relay runners on the team comfortable with baton carriage and baton passing is to
have several batons available every day in practice for runners to carry as they warm-
up—old, chipped, dented batons that a team would no longer use in competition are
perfect for this activity.

245
C h a p t e r 1 0
Training Sprinters
Some relay teams using the upsweep pass do try to pass hand-to-hand. That is quite
acceptable, but it requires a very close and solid pass.
Patch Passing. Passing Zone Patch Areas. Patch passing is one of the most important
features of successful relay baton passing, and it can be incorporated into any baton
passing method.
It encompasses the concept of using a “patch area” rather than a single “takeoff mark”
to indicate when the incoming runner is close enough for the outgoing runner to
begin sprinting.
The “patch area” is created by the outgoing runner who marks or places tape on the
track to create a “patch” that forms a rectangle in the team’s lane of 1.5 meters or 4–5
feet in length rather than a single piece of tape to be used as a takeoff mark.
With the traditional single piece of tape used for a “takeoff” mark, the outgoing run-
ner is forced to judge when the incoming runner reaches that specific takeoff point.
Rarely does the incoming runner actually land on that piece of tape, thus demand-
ing some very rapid judgment or proprioception on the part of the outgoing runner.
Given that the outgoing runner is almost always anxious, bent over, looking back-
ward, and a teenager, that can be a pretty hefty demand.
Patch passing makes the “go” or “takeoff” point consistent and easy to see. By creating
a patch, the outgoing runner needs only to watch for the foot of the incoming runner
to touch the ground within the patch. On those rare occasions when the incoming
runner steps just before the patch and then the second foot lands on the other side
of the patch, the outgoing runner still knows to start when the incoming runner is in
the “patch area.”
Patch passing allows the outgoing runner to start with full acceleration at the same
moment in every race. Minimizing anticipation and judgment creates a safe and con-
sistent pass with good acceleration. Of course, full speed practice is required to deter-
mine the correct patch placement on the track.
With the strong predictability of patch passing, verbal signals can even be eliminated.
Passing by verbal signals is often subjective and inconsistent. In large, close races, it
is very easy for these signals to be lost amidst the noise and confusion eight or nine

246
C h a p t e r 1 0
Training Sprinters
runners all yelling at one time. With good patch passing, a predetermined patch or
mark can also be made within the exchange zone. That way, the outgoing runner only
needs to respond to his or her own acceleration. Once the runner hits the patch, back
goes the hand. If the baton does not arrive immediately, the outgoing runner knows
to slow somewhat until the baton is there.
The Alternating Downward Exchange
With this method, the incoming runner grips the bottom portion of the baton and
passes it with a downward sweep to the outgoing runner who extends his or her arm
back, palm up. As with the upsweep method, it is passed right-to-left at the ﬁrst
exchange, left-to-right at the second exchange, and right-to-left at the third exchange.
The baton always travels down the center of the lane, so the first leg runner stays in
the inside half of the lane (important since the majority of the first leg is run on the
curve), the second leg runs in the outside half of the lane (not important since the
majority of the second leg is run on the straight), and the third leg runs on the inside
of the lane (important since the majority of the third leg is run on the curve). This
arrangement not only allows the first and third legs to run the shortest distance around
the curve but, most importantly, it permits relay members to run-up to each other
without getting their legs tangled. Remember, it is the speed of the baton moving
through zone that is paramount—not the speed of the runners. If the two runners are
almost side-by-side, it is fine if the speed of the baton is not slowed.
The Exchange Zone
The baton must be passed within a 20-meter exchange zone marked on the track by lines
which cross the width of each lane. It is the successful exchange of the baton that deter-
mines if it has been passed legally. If the outgoing runner has stepped over the far end of
the exchange zone, but the baton is still within the exchange zone when it has completely
passed from the incoming runner to the outgoing runner, the exchange is legal.
In relay races shorter than 400 meters, the exchange zone is preceded by a 10-meter
“Acceleration Zone” marked on the track by a small triangle in the middle of the
lane. The outgoing runner may begin his or her run-up into the exchange zone from
anywhere inside that acceleration zone; however, in order to ensure that maximum
acceleration of the outgoing runner has been achieved at the point of exchange, it is
recommended the entire 10m acceleration zone be used.

247
C h a p t e r 1 0
Training Sprinters
The Outgoing Runner
The outgoing runner may either stand or crouch at the beginning of the acceleration
zone, with both knees bent for good leg angles and both feet pointing in the direction
to be run. Body lean should be forward with weight equally distributed over both legs.
Both heels should be off the ground with the head turned looking back.
Adjustments as to the exact placement on the track of the “go patch” have to be made
during training sessions as the two runners practice the exchange.
Of course, there are other factors that affect the speed of the incoming runner and the
acceleration of the outgoing runner in every meet such as the wind or the condition of
the running surface.
Responsibilities of the Outgoing Runner:
• Know exactly which lane your team has been assigned before you go to your zone.
• Remove all other “go” marks from your lane.
• Place your “go” patch all the way across your lane.
• When the incoming runner hits the patch, start explosively and accelerate all the
way through the exchange zone. Never slow or ﬂoat to receive the baton.
• Stay on your half of the lane!
• Do not extend your hand back for the baton until the incoming runner calls for it
or you reach your mark.
• Give the incoming runner a steady, soft hand (slightly cupped) when he or she
calls for it. Don’t grab for the baton. Never look back.
• Following the race, discuss the execution of the passes with your incoming and out-
going partners to determine how you might be able to improve.
The Incoming Runner
It is the duty of the incoming runner to get the baton into the hand of the outgoing runner.
Responsibilities of the Incoming Runner:
• Catch the outgoing runner!
• Stay on your half of the lane.

248
C h a p t e r 1 0
Training Sprinters
• Do not extend the baton until you have focused on the hand. Do not decelerate,
and never lean to reach the hand.
• Shove the baton up into the crease of the palm hand.
• If you miss completing the pass on the first stroke, keep sprinting, and get the baton
into the hand on the next stroke.
• Sprint all the way through the zone, regardless of where you complete the exchange!
• Stay in your lane until the outgoing runner in every other lane has passed you.
• Following the race, discuss the execution of the passes with your incoming and out-
going partners to determine how you might be able to improve.
RELAY PRACTICE TIPS
• Practice baton exchanges at realistic racing speeds. The most common mistake
many high school teams make when practicing baton exchanges is to conduct a
training session with the incoming runner sprinting full speed from a distance of
30 meters or less—this certainly does not simulate race conditions in which the
incoming runner is required to make the baton exchange after a full effort of 100
meters when the runner is decelerating and very tired. Practicing baton exchanges
at speeds that cannot possibly be achieved during the actual relay will only serve to
ensure the exchanges will not be efficient.
Another mistake high school teams make is to practice relay exchanges at the end
of practice when all relay members may be tired. Productive relay training should
be done when all relay members are fresh and sufficiently warmed up to produce a
full effort. Just as practicing baton exchanges at speeds greater than can possibly be
achieved is undesirable, practicing exchanges at speeds slower than race speed due
to athletes being tired or improperly warmed up will also yield poor results.
• Emphasize maintaining the speed of the baton through the zone. (If the two
runners were invisible, you should never see the baton slow down.)
• Practice exchanges in different lanes, including Lanes 1 and 8!
• Practice with other sets of runners in adjoining lanes to simulate the congestion
and distractions runners have to deal with in the zone. One excellent way to do this
that will allow a single coach to see more exchanges is to have your one and two

249
C h a p t e r 1 0
Training Sprinters
runners work in lane three and your three and four runners work in lane 5 or have
your varsity boys work in lane three, your junior varsity boys in lane four, your
sophomore boys in lane five, and your girls varsity in lane 6. To further simulate
congestion, start each group at slightly different times.
• Coaches should watch exchanges from a distance —many coaches find it help-
ful to watch exchanges from the stands to get a better perspective. It is difficult to
determine if a runner leaves early or if the pass occurs at the proper point if the
coach is right next to the action.
4 X 400 METER RELAY
The 4 x 400m relay is the final running event in a track meet, so the result of that event
could very well determine the outcome of the entire meet. However, even if a team has
lost the overall meet a strong effort in the 4 x 400m can lift an entire team’s spirt.
As with the 4 x 100m relay, a team that passes the baton well can gain on every ex-
change over a team that does not.
Team Selection
Your six best 400m runners, whether they are 100/200m specialists, hurdlers, 800m
runners or milers, should be the group from which you choose the four members of
your 4 x 400m relay from meet to meet.
Placement of Individuals
1st Leg. Usually, this is where a team traditionally would put the second best 400m
runner to attempt to give the team the early lead or, at least, put the team at the front
of the pack. This leg is run completely in lanes and out of blocks at the start, so it is
not a spot for an 800m runner or miler.
2nd Leg. In multi-team meets, which use a three-turn stagger for the 4 x 400m relay,
it is crucial to have a second leg runner who will run aggressively for the first 100
meters to position the team well after the break—this runner must not be timid or
afraid of a bit of contact. This is a good spot for 800-meter runners due to their expe-
rience in breaking to lane 1 on the backstretch.
3rd Leg. This is where most teams place their slowest runner; however, if the third
best runner is good at hanging onto the leaders or closing gaps, it may be wise to
place the slowest leg second.

250
C h a p t e r 1 0
Training Sprinters
4th Leg. This should be the team's best 400m sprinter if that runner can handle
the pressure of anchoring and has both the competitive spirit to chase and a strong
enough ego to deal with being caught and passed on occasion.
Passing the Baton
The objective is to pass the baton from one runner to the next with no loss of speed.
As with the 4 x 100m relay, there are several different methods that may be used for
passing the baton in the 4 x 400m relay.
The Semi-Visual, Non-Verbal Exchange
With this method, the lead-off runner begins with the baton in the right hand. All
passes are made from the incoming runner’s right hand to the left hand of the outgoing
runner, which means runners must quickly change the baton from the left to right hand
shortly after receiving it. The reason for the second, third and fourth runners receiv-
ing the baton in their left hands is it allows them to face the inside of the track. This
enables the outgoing runners to quickly assess their inside lanes and avoid the confusion
that often occurs after the first exchange, when the relay is no longer run in open lanes.
Outgoing runners must judge the incoming runner’s position and finishing strength
(read fatigue), just as they would judge the speed and trajectory of a fly ball when
playing center field. When the outgoing runners judge it is time to go, they turn to
face down the track, accelerate quickly for three strides, and then reach back thumb-
up to take the baton in their left hands.
Because of the fatigue and blurred vision often experienced by incoming runners,
their only responsibility is to run through the zone and extend the baton once they
get close enough to make the pass to the outgoing runner. It is the outgoing runner’s
responsibility to take the baton from the hand of the incoming runner!
The Exchange Zone
The baton must be passed within a 20-meter exchange zone marked on the track by
lines that cross all lanes of the track. Unlike the 4 x 100m relay, there is no accelera-
tion zone in the 4 x 400m relay, and the outgoing runners must stand within the 20m
zone to await the incoming runner. The baton must be received within the exchange
zone to be a legal pass.

251
C h a p t e r 1 0
Training Sprinters
Responsibilities of the Incoming Runner:
• Drive all the way to the finish line and through the exchange zone. Do not deceler-
ate as the baton is extended to the outgoing runner.
• Do not extend the baton until you are close enough to make the pass to the outgo-
ing runner.
• Do not try to place the baton in the hand of the outgoing runner. Make the baton
a steady target and let the outgoing runner take it from you.
Responsibilities of the Outgoing Runner:
• Take the baton in full sprinting stride from the incoming runner, not standing still.
• Begin accelerating from the back of the zone looking straight ahead. After three
strides, look back and take the baton from the incoming runner with your left
hand, thumb-up.
• For the athletes running legs two and three, when safe, change the baton from the
left hand to the right hand.
Applying Strategy to the Sprint Races
100 METERS
The three phases of the 100 meters are the start, acceleration phase and the stride/
lift phase.
1. The Start (ﬁrst stride out of the blocks):
• Train for a rapid, consistent reaction to the gun.
• The athlete should move immediately, in a controlled fashion, into the “set”
position so he or she is not left in the blocks by a quick gun.
• Get into a good “set” position, with pressure on both blocks—the athlete must
trust his or her ability to react.
• Do not concentrate on the gun! Concentrate on what to do at the gun! Drive the
arm opposite of the back leg off the starting line to begin the action of falling for-
ward, which in turn triggers the reﬂex of the legs exploding off the block pedals.

252
C h a p t e r 1 0
Training Sprinters
• Think beyond the first stride! Visualize exploding out of the blocks and accelerat-
ing down the track.
2. The Acceleration Phase (first 50–60 meters):
• Maintain relaxation by concentrating on being quick and light, not on digging
holes in the track.
• Don’t chase; a sprinter should run his or her own race! Don’t focus on the oppo-
nents and forget to run your own race.
3. The Stride/Lift Phase (final 40–50 meters):
• Maintain speed by maintaining mechanics and relaxation. Never struggle!
• Don’t run to finish; run through the finish line!
• Practice leaning so it occurs at the finish line, not before or after the line.
200 METERS
The four phases of the 200 meters are the start, acceleration phase, transition
phase and the stride/lift phase:
1. The Start (first strides out of the blocks):
• Angle the starting blocks tangent to the top of the curve.
• All other considerations for the 100m start apply.
2. The Acceleration Phase (first 50–70 meters):
• In the 200m the entire acceleration phase occurs on the curve, so practice accel-
erating on the curve from the blocks in every lane.
• Don’t concede the race if lane one is drawn! It is the longest and tightest curve to
run, so prepare or the challenge by training in Lane 1 often.
3. The Transition Phase (from the curve into the straight, 80–100m into the race
depending on the lane):
• Lean into the curve to create a slingshot effect upon entering the straight.
• Practice making the transition from the curve into the straight in the inside three
lanes (the tightest curves). The more a sprinter has to lean into the curve, the
more difficult the transition into the straight will be.

253
C h a p t e r 1 0
Training Sprinters
4. The Stride/Lift Phase (final 130–150 meters):
• Maintain speed by maintaining mechanics and relax. Never struggle!
• Don’t run to finish; run through the finish! Practice leaning so it occurs at the
finish line, not before or after the line.
400 METERS
The 400 meters is a specialized speed-endurance event. These are the “racing weap-
ons” a runner must have to be a successful 400m sprinter:
1. The ability to judge pace. Recommended pacing for high school 400m runners, for
the first 200 meters of the race:
• F-S Girls . . . . . best 200 + 4.0 sec.
• Varsity Girls . . best 200m + 3.0 sec.
• F-S Boys . . . . . best 200m + 2.0–2.5 sec.
• Varsity Boys . . best 200m + 1.5–2.0 sec.
2. The ability to adjust pace.
3. The ability to maintain rhythm.
4. The ability to maintain sprint mechanics in fatigue.
Other Tactical Advice for Sprinters
• In meets where preliminary rounds are run, start fast and work no harder over the
final stages of the race than is necessary to advance to the next round or final. The
objective for a team should be to advance to the final without its opponents know-
ing exactly how fast it is capable of running.
• Warm-down immediately after the race to flush the acid buildup out of the muscles.
• If there is another round or event to be run, runners should put on their sweats
immediately to avoid cooling off too quickly. Warm-up thoroughly for the next race.

254
C h a p t e r 1 0
Training Sprinters
A Training Periodization Plan for the Traditional
High School Track Season
The high school track and field season can be divided into the following
four periods:
• Preseason . . . . . . . January to Mid-February . . . . . . . (6 weeks)
• Early Season . . . . Mid-February through March . . . . (6 weeks)
• Mid-Season . . . . April . . . . . . . . . . . . . . . . . . . . . . . (4 weeks)
• Late Season . . . . May . . . . . . . . . . . . . . . . . . . . . . . (4 weeks)
Each period should have specific objectives and employ different training methods.
Research has shown that four to six weeks appears to be the maximum sustained
period of improvement for any single type of training; therefore, a system of training
sprinters should follow a seasonal training plan that uses a variety of training methods.
Final ThoughtS
A coach should recognize sprinters cannot train at high intensity and compete in
13–18 meets over the course of 20 weeks without the likelihood of becoming injured.
Sufficient recovery after each hard training session and track meet is crucial for a
sprinter to develop and attain his or her training objectives and performance goals. A
complete warm-up and warm-down each day plays a key role in enhancing restora-
tion. Other restoration enhancement methods, such as massage, sauna, electrostimula-
tion and Jacuzzi can be helpful, but they cannot replace the body’s need for recovery
time between bouts of hard training.

255
C h a p t e r 1 0
Training Sprinters
Running warm-up:
Pre-stretch plus:
Flexibility/mobility exercises:
q Static Series q Swing Series
Build-ups:
x60m x80m x100m x120m x150m
Block Starts:
Workout:
q Sprint-Float-Sprint q 400m Speed Play q Degressing Reps
q Lean Drills q Uphill Sprints q Pyramid Reps
q Interval Sprints q Downhill Sprints
q Repetition Sprints q Curve Sprints
Baton exchanges:
Warm-down:
rhythmic Plyometric Drills x Reps or Meters
Power Plyometric Drills x Reps or Meters
Weight Training:
sprinters workout
planning aids for developing your training system
Sequence Group: Date:

256
C h a p t e r 1 0
Training Sprinters
Running warm-up:
Pre-stretch plus:
Build-ups:
x60m x80m x100m x120m x150m
Block Starts:
Workout:
Baton exchanges:
Warm-down:
Weight Training:
S ample 1 0 0 M sprinters workout
3 3
3
1
2
3
4
6
7
5
4 x (100m jog-stride-100 jog-100 sprint)
Walk 200 between each set
Fred- Ben -Walter
Desiree - Pamela - Michelle
100m Group Mon April 9
1600m Surge straights last two laps
Plus Rhythm Drills
3 2 1
5
800m
1 x upper body set

257
C h a p t e r 1 0
Training Sprinters
Running warm-up:
Pre-stretch plus:
Build-ups:
x60m x80m x100m x120m x150m
Block Starts:
Workout:
Baton exchanges:
Warm-down:
Weight Training:
3 3
3
1
2
3
4
6
7
5
2 x (300m - 60 sec. - 300m) 8 min. between sets
Will - Dustin - Leo @ 45 - 45
Sjoni - Lana - Carlyn @ 50 - 50
4
800m
1 x upper body set
4 x 400 R 3 x ea. exchange

258
C h a p t e r 1 0
Training Sprinters
Running warm-up:
Pre-stretch plus:
Build-ups:
x60m x80m x100m x120m x150m
Block Starts:
Workout:
Baton exchanges:
Warm-down:
Weight Training:
3 3
3
1
2
3
4
6
7
5
3 x (200 - 150 - 100 / jog 100 same distance) Recovery
Jay - Wade - Chris @ 27 - 19.5 - 13
Shelly - Gniesha - Angel @ 33 - 24 - 15
6
800m
1 x upper body set
4 x 400 R 3 x ea. exchange

259
C h a p t e r 1 0
Training Sprinters
O’Brien
Invitational
Meet
Arcadia
Invitational
Meet
Mt. Sac
Relays
Rest Day!
Easy Run (20 min)
Stretch
Rhythm Drills
Weights
Warm-Up
Warm-up
Stretch
4 x 150 Strides
Warm-Up
Warm-Up
Stretch
3 x 250 Strides
Interval Sprints
3 x (300-60 sec-
300)
8 min between sets
Meet
Away Meet
vs
Du Bois
Meet
Home Meet
vs
Crispis
Meet
Home Meet
vs
Mc Kinley
Technique Training
10x Block Starts
around Curve
4 x 400R
Exchanges
Weights
Warm-Up
Team Meeting
Stretch
Strides 300-200-
100
4 x 400R
Exchanges
Warm-Up
Team Meeting
Stretch
5x100 Strides
4x400R Exchanges
Warm-Up
Team Meeting
Stretch
5 x 100 Strides
Medley Exchanges
Speed Reps
8 x 150m
Walk/Fly Start
Walk 150/Jog 100
Recovery
Pyramid Reps
4 x (100-200-100)
Increase speed,
decrease recovery
each set
S-F-S
3 x (100 Sprint-
100 Float-100
Sprint)
Walk 400m
between
S-F-S
3 x (100 Sprint-
200 Float- 100
Sprint)
Jog 400
Easy Run
30min Easy Run
Stretch
Stride 300-200-
100
Speed-Endurance
3 x 500M
8 min recovery
Weights
1 x 300m-200-100
DEGR Reps
3 x (200-150-100)
Jog
Same dist for
recovery
8 min between sets
Weights
Speed Reps
8 x 60m
Walk/Fly Start
Walk/Jog 300
between Reps
Weights
Speed-Endurance
1 x (600-500-300)
10 min recovery
Weights
Easy Run
or
Rest Day
Easy Run
or
Rest Day
Easy Run
or
Rest Day
Easy Run
or
Rest Day
Monday Tuesday Wednesday Thursday F riday Saturday Sunday
1
8
15
22
2
9
16
23
3
10
17
24
4
11
18
25
5
12
19
26
6
13
20
27
7
14
21
28
Sample 4-week 400m Training Plan, April 1–28
Preseason 1 Aerobic running Circuit training
2 Circuit training Aerobic running
Early season 3 Repetition training Speed drills
4 Repetition training Speed drills
Mid-season 5 High-lactate training Speed endurance
6 Speed-endurance High-lactate training
Late season 7 Peak-speed training High-lactate training
2-4 wk phase primary emphasis secondary emphasis

260
Training Hurdlers
The hurdle events are rhythmic events. Speed is a basic requirement
for hurdling, but the ability to express speed within a rhythmic
pattern is more important. Hurdle events are not jumping events.
Racing over hurdles demands an elongated sprint stride with as little
deviation from correct sprint form as possible. Technique, mobility,
poise, muscular strength and stamina are qualities needed for the
hurdle events. The hurdles are a test of athletic versatility.
11
C h a p t e r

261
C h a p t e r 1 1
Training Hurdlers
A Philosophy for Coaching the Hurdles
The hurdler’s most important physical asset is speed. The key to success is maintain-
ing speed between hurdles. This is where rhythm becomes a key ingredient.
Nine factors can be identified as contributing to successful hurdling: speed, rhythm,
technique, ﬂexibility (which includes range-of-motion), strength, stamina (to main-
tain proper technique), poise and body type (especially leg length).
Of these nine factors, all but the hurdler’s body type can be greatly enhanced by
proper training.
Girls’ Boys’ Girls’ Boys’
100m H 110m H 300m H 300m H
Hurdle Height 33 inches 39 inches 30 inches 36 inches
Number of 10 10 8 8
Hurdles
Distance to 13 meters 15 yards 45 meters 45 meters
First Hurdle
Distance Between 8.5 meters 10 yards 35 meters 35 meters
Hurdles
Distance from Last 10.5 meters 14.02 meters 10 meters 10 meters
Hurdle to Finish
Strides to 8–9 8–9 22–24 21–23
First Hurdle
Strides Between 3 3 15–18 14–17
Hurdles
Strides from Last 5 6 5 5
Hurdle to Finish
Total Strides 50–51 51–52 140–205 140–195
Flat Time vs. Add 2.0– Add 2.0– Add 2.5– Add 2.0–
Hurdle Time 2.5 sec. 2.5 sec. 4.0 sec. 3.5 sec.
Takeoff 5'3"– 6'4" 6'6"–7'6" 5'–6' 6'6"–7'6"
Distance to H
hurdle reference chart

262
C h a p t e r 1 1
Training Hurdlers
Teaching the Technique of Hurdling
Fundamental Mechanics
• Hurdling is sprinting over the hurdle, rather than jumping over it. The center of
gravity is actually raised very little to clear the hurdle.
• Hurdle clearance is accomplished by transferring speed (horizontal momentum)
vertically at takeoff.
• A short last stride helps the body accelerate into the takeoff.
• Forward lean at takeoff transfers vertical momentum into a ﬂat, parabolic flight of
the body over the hurdle.
• At takeoff, the lead leg creates a short moment-of-inertia by leading with the knee
to the hurdle.
• The eyes should look up during takeoff and focus on the next hurdle.
• The lead arm and trail leg should act as short, quick levers over the hurdle to
accomplish a rapid clearance. Improper arm-action creates compensating actions,
which result in off-balance landings.
• Forward lean must be maintained over the hurdle until touch-down to maintain
forward velocity. This allows the athlete to return to the ground in sprint position.
• Sprint speed can be improved by increasing either stride length or stride rate.
Hurdling speed can only be improved by increasing the efﬁciency of hurdle clear-
ance and the stride rate between hurdles.
Hurdle Technique Checklist
Head and Chest
• Chest over lead thigh in advance of the lead leg knee.
• Head no higher than normal sprinting position.
• Eyes focused on the next hurdle at takeoff.
• Shoulders level and parallel to the hurdle.
• Hold forward lean until lead foot touches down.
Lead Leg
• Drive the knee, rather than kick the foot, to the hurdle.
• Lead toe pulled back, not pointed.

263
C h a p t e r 1 1
Training Hurdlers
• Reach a bent lead leg over the hurdle.
• Begin snap-down when the lead foot, not the hip, reaches the hurdle.
• Drive the lead leg straight at and over the cross piece. Don’t “hook” the hurdle.
• Straighten the lead leg during snap-down.
• Land on the ball of the foot.
• Drive off the ball of the foot into the getaway stride.
• Do not drop onto the heel.
Trail Leg
• Pull the knee through under the armpit, not flat across the top of the hurdle. The
heel passes close to the hip. Keep the foot dorsiflexed with the toes pointed up.
• Pull the knee over the hurdle and push the foot down.
Lead Arm
• At eye level during takeoff.
• Upper arm parallel to the thigh of the lead leg.
• Lead arm bent 120-degrees during reach and pullback.
• Lead hand sweeps back below the trailing knee.
Between Hurdles
• Vigorous drive off the hurdle into a long "getaway" stride.
• Good high-knee sprint action on the balls of the feet.
• Active cut-step into takeoff at the next hurdle.
• Full extension off the ball of the foot into takeoff.
Stages of Hurdling: Girls’ 100m and Boys’ 110m
The Start
The lead leg should be positioned in the back block if an even number of strides are
taken to the first hurdle (preferably eight strides), and the trail leg should be in the
back block if an odd number of strides are used. In the “set” position, the hips should
be slightly higher than the shoulders with the arms supporting the shoulders directly

264
C h a p t e r 1 1
Training Hurdlers
above the starting line. The hurdler’s “set” position should be comfortable without too
much weight over the hands.
The First Strides
The hurdler must move to a tall sprinting position by the time he or she is two strides
away from the first hurdle. The center of mass should be high going into the takeoff.
The hurdler should drive off the front block with a full extension of the leg for a long,
quick first stride. Each successive stride to the hurdle should lengthen until the cut-
step into the takeoff (see Fig. 11-1).
The Takeoff
The takeoff at each hurdle is crucial because it must be part of a continuous accel-
eration through the initial stages of the race. Hitting a hurdle or landing off-balance
will result in a loss of speed, which can never be recaptured in a race of 100 to 110
meters.
Taking off too close to the hurdle forces a vertical takeoff to clear the hurdle, resulting
in a higher, slower parabolic flight over the hurdle. The taller the athlete, the further
he or she must take off from the hurdle for a flat, fast clearance.
For female 100m hurdlers, the race is run over barriers 33 inches high. The takeoff
distance to the hurdle should be approximately six feet. For male 110m hurdlers, the
Fig. 11-1. Sprint Start
for sprinter vs. hurdler
(shadow figure).
Fig. 11-2. Boys’ 110m Hurdle Clearance.
Fig. 11-3. Strides to the 1st Hurdle (Boys' 110m/Girls' 100m).

265
C h a p t e r 1 1
Training Hurdlers
race is a sprint over 39-inch barriers. The takeoff distance to the hurdle should be
about 6½–7½ feet, depending on the athlete’s height, leg length, stride length and
forward velocity. Figures 11-2 and 11-3 illustrate the takeoff and action over
the hurdle.
The lead leg action is initiated by driving the knee towards the top of the hurdle. The
lift of the lead knee should be explosive, aiding the powerful extension off the takeoff
leg. The lower leg is relaxed and tucked under the thigh as the lead leg drives upward.
The foot should be dorsiflexed with the top of the foot pulled up toward toward the
shin. This tucking action gives the hurdler a short, quick, bent lead leg, and helps
shift the center of mass forward over the hurdle. The lead arm should reach slightly
across the body to keep the shoulders square to the hurdle.
Lead Leg Action Over the Hurdle
The peak of the hurdler’s parabolic flight should be achieved prior to reaching the hur-
dle. The lead leg should remain slightly bent over the hurdle. Once over the hurdle, the
objective is to get back down to the track as quickly as possible. This is accomplished
by a snap-down action of the lead leg. Snap-down should begin as soon as the lead
foot, not the hip, has passed over the hurdle. The lead leg should be nearly straight by
the time the foot touches down below the hips on the other side of the hurdle.
Trail Leg Action Over the Hurdle
Once the takeoff leg leaves the track, it becomes part of the trail leg. The heel of the
trail leg should come to the buttocks with the toe pointed out to the side so the foot
will avoid hitting the hurdle. For a short, quick lever over the hurdle, trail leg posi-
tion should be high and tight, with the knee under the armpit and the heel close to
the hip. Avoid a “flat” position with the hip, heel and foot all on the same horizontal
plane. The action of the trail leg should be a continuous movement during the hurdle
clearance, without a pause, or float, over the hurdle. As the trail leg pulls through, the
lead arm will swing to the side in wide arc as a response to the trail leg action. The
shoulders remain square to the hurdle throughout.
Touch Down
At touch-down, the hurdler’s center of mass should be directly over or slightly ahead
of the lead foot. The hurdler should land on the ball of the foot and not drop to the
heel (which creates a braking action). This puts the athlete in position to drive for-
ward off the ball of the foot into the getaway stride. The trail leg knee must drive for-

266
C h a p t e r 1 1
Training Hurdlers
ward, not drop to the side, for a long first stride to the next hurdle.
Sprinting Between the Hurdles
Unlike flat sprinting, in hurdle events, no two of the four strides used over and
between two hurdles are the same. The getaway stride is relatively short. The second
stride is the longest, and the third stride is a cut-step to accelerate the center of mass
into the takeoff for the next hurdle.
Proficient high school hurdlers will take eight strides to the first hurdle and three
strides between hurdles, so the hurdler with the quickest stride rate will have the
greatest success if his or her technique is equal to that of their opponents.
Run-In After the Last Hurdle
In a close race, the hurdler who is first to return to sprint form off the last hurdle and
best times his or her lean into the finish line, has the best chance of victory.
Common Hurdling Mistakes and Corrective Techniques
• Decelerates at the hurdle: Caused by a long stride into the takeoff. Correct by
emphasizing attacking the hurdle with a short cut-step.
• Insufficient lean into the hurdle: Usually caused by a straight lead leg (driving the
foot, rather than the knee, to the hurdle). Correct by emphasizing a bent lead leg
and leaning the chest to the thigh as the knee drives to the hurdle.
• Off-balance at touch-down: Caused by shoulders turning as lead leg drives to the
hurdle. Correct by keeping the shoulders square to the hurdle and driving the lead
arm forward, head high and slightly across the body.
• Drops to heel at touch-down: Caused by sitting up on top of the hurdle. Correct
by maintaining lean into touchdown.
• Wild straight-arm paddle: Caused by a flat trail leg recovery of the lead arm on
the opposite side. Correct by bringing the trailing knee up under the arm pit and
keeping the heel close to the hip.
• Cannot 3-step between hurdles: Caused by a short first stride which results from
dropping the trail leg as it clears the hurdle. Correct by pulling the trailing knee
through high and driving forward for a long first stride off the hurdle.

267
C h a p t e r 1 1
Training Hurdlers
Stages of the 300m Hurdles
Start to the First Hurdle
The hurdler uses a normal sprint start from the blocks. High school boys normally
take 21–23 strides to the first hurdle, girls 22–24 strides. (22 strides to the first hurdle
equates to a 15-stride pattern between hurdles.) When the hurdler takes an even num-
ber of strides to the first hurdle, the lead leg should be placed in the rear block. For an
odd number of strides to the first hurdle, the lead leg is placed in the front block. The
number of strides taken from the start to the first hurdle is a good indicator of the
stride pattern to the following hurdles:
Strides to Strides Required
1st Hurdle Between Hurdles Stride Length
21 13 8'0"
21–22 14 7'6"
22 15 7'0"
22–23 16 6'6"
24 17 6'1"
25 18 5'5"
The speed to the first hurdle should be slightly slower than flat 400m pace due to the
controlled stride pattern demanded by hurdling. The last three strides to the hurdle
should be consistent in length, never chopped, and accelerate to the hurdle. It is
essential that beginning hurdlers count their strides to establish their optimum stride
pattern and rhythm. Rather than count each footstrike, a hurdler should count each
time the takeoff foot hits the ground.
Hurdle Clearance
With the lower hurdle heights (36 inches for boys, 30 inches for girls), the forward
lean required to drive the center of mass over the hurdle is minimal and the stride
over the hurdle is not a dramatic departure from the sprint stride used between hur-
dles (see Fig. 114).
Strides Between Hurdles
A stride pattern of 15 to 17 strides is most commonly used by high school boys. For
high school girls 17 to 19 strides is typical. It is essential to maintain rhythm and
quick, efficient hurdle clearance to perform well in the 300m hurdles. Stuttering
before any of the eight hurdles (chopping strides to bring the desired lead leg to the
Fig. 11-4.
300m Hurdle Clearance

268
C h a p t e r 1 1
Training Hurdlers
hurdle) will cause the hurdler to lose speed that can never be recaptured during the
race. This event is a 300m sprint around a curve with a 180-degree change of direc-
tion and eight interruptions! The hurdler’s stride pattern is going to be influenced by
having to run into the wind, with the wind to the side, with the wind at the back,
running around a tight curve in an inside lane or long curve in an outside lane, and
by fatigue. The only way most 300m hurdlers can consistently maintain speed and
rhythm in this event, hurdle-to-hurdle, race-after-race, is to learn to hurdle using
either leg as a lead.
Hurdling on the Curve
Using a left lead leg is preferable because it allows the hurdler to run closer to the
left (inside) border of the lane. Most important is clearing the center of the hurdle
to avoid bringing the trail leg outside and below the plane of the hurdle, which will
result in disqualification.
Run-In to the Finish Line
To counter the fatigue experienced in the final straightaway of this race, the 300m
hurdler must make a conscious effort to accelerate into the last two hurdles.
Hurdle Touch-Down Time Charts
An effective method to evaluate the various stages of a hurdle race is for the coach to
record the athlete’s touch-down times after each hurdle. The charts on the facing page
cover a wide range of performances for boys’ and girls’ hurdle events.
Methods of Training for the Hurdle Events
Considerations in Training Hurdlers
• Hurdle training must emphasize the following areas:
• Technique
• Rhythm
• Speed
• Stamina
• Ballistic strength
• Flexibility

269
C h a p t e r 1 1
Training Hurdlers
TARGET FINISH
TIME H1 H2 H3 H4 H5 H6 H7 H8 H9 H10 TIME
13.6 2.5 3.6 4.6 5.6 6.6 7.7 8.8 9.9 11.0 12.2 13.6
14.0 2.5 3.6 4.6 5.7 6.8 7.9 9.0 10.1 11.2 12.4 14.0
14.4 2.6 3.6 4.7 5.8 6.9 8.1 9.3 10.5 11.7 12.9 14.4
14.6 2.6 3.7 4.7 5.8 7.0 8.2 9.4 10.6 11.8 13.0 14.6
15.0 2.6 3.7 4.9 6.0 7.2 8.3 9.5 10.7 12.0 13.2 15.0
15.5 2.7 3.8 5.0 6.2 7.4 8.6 9.8 11.0 12.3 13.6 15.5
16.0 2.8 3.9 5.1 6.4 7.6 8.8 10.1 11.3 12.6 14.0 16.0
TARGET FINISH
TIME H1 H2 H3 H4 H5 H6 H7 H8 H9 H10 TIME
13.8 2.5 3.6 4.6 5.7 6.8 7.9 9.1 10.2 11.0 12.2 13.8
14.0 2.5 3.6 4.6 5.7 6.9 8.1 9.3 10.4 11.2 12.4 14.0
14.3 2.6 3.6 4.7 5.9 7.1 8.3 9.5 10.7 11.7 12.9 14.3
14.8 2.6 3.8 4.9 6.0 7.2 8.4 9.6 10.9 11.8 13.0 14.8
15.0 2.6 3.8 4.9 6.1 7.3 8.5 9.7 11.0 12.0 13.2 15.0
TARGET 200M FINISH
TIME H1 H2 H3 H4 H5 SPLIT H6 H7 H8 TIME
36.6 6.0 10.3 14.4 18.6 22.8 24.3 26.7 31.2 35.4 36.6
38.0 6.3 10.6 14.8 19.1 23.2 25.2 27.7 32.2 36.8 38.0
39.4 6.5 10.9 15.2 19.5 23.9 25.9 28.5 33.2 38.0 39.4
40.8 6.8 11.2 15.6 20.1 24.6 26.7 29.4 34.3 39.3 40.8
42.2 7.1 11.6 16.1 20.8 25.5 27.6 30.4 35.5 40.7 42.2
43.7 7.3 12.0 16.7 21.5 26.4 28.6 31.5 36.7 42.1 43.7
45.2 7.6 12.4 17.3 22.2 27.3 29.5 32.5 38.0 43.5 45.2
46.6 7.8 12.8 17.8 22.9 28.1 30.5 33.6 39.2 44.9 46.6
48.8 8.0 13.2 18.4 23.6 29.0 31.4 34.6 40.4 46.3 48.8
BOYS’ 110m HURDLES
GIRLS’ 100m HURDLES
BOYS’ AND GIRLS’ 300m HURDLES

270
C h a p t e r 1 1
Training Hurdlers
• Training must be adapted to meet the needs and skill levels of the athletes. Lower
hurdle heights and shorter hurdle spacings should be used to allow novices to hurdle
with speed and rhythm from the onset.
• Beginning hurdlers should be taught to lead with either leg. Many 13–14-year-old
freshman/sophomore hurdlers have to 4-step and alternate legs in the 100m and
110m hurdle events. This is a skill that will serve all hurdlers well in the 300m event.
• Constantly emphasize hurdling is a sprint over barriers, and hurdle mechanics
should deviate only slightly from sprinting mechanics.
• As soon as hurdlers become proficient with a drill, they should practice that drill
at full racing speed. The hurdles are sprint events and little is accomplished by
practicing hurdling slowly! A good method to ensure the hurdler trains at racing
speeds is to use the touch-down timing charts in this chapter as a training guide.
Coaches should take split times when the lead foot touches the ground after clearing
each hurdle. Recording hurdle split times in training and races will help coaches
pinpoint weaknesses in their athletes’ performances and design workouts to address
those weaknesses.
• Speed-endurance, or stamina, is an important aspect of hurdle training. Technique
usually begins to deteriorate after the seventh hurdle, the point at which most races
are won or lost. Hurdlers must train over six, eight, 10, and occasionally 12 hurdles
to fully develop the stamina necessary for hurdling.
Stationary Hurdle Drills
Drills which isolate specific hurdling techniques should be part of every day’s hurdle
training. Introduce drills over low hurdles so basic hurdle mechanics can be practiced
easily at sprint speeds.
• Lead Leg Punch-Ups (hurdle placed against a wall or fence):
Hurdler takes one step into takeoff, driving the knee to the hurdle and unfolding
the lower leg so the ball of the foot meets the wall or fence directly above the hurdle.
Bent leg straightens out to thrust hurdler back to his or her takeoff mark
(see Fig. 11-5).
• Trail Leg Circles (hurdle placed two feet from a wall or fence):
Hurdler stands with the lead leg beside and forward of the edge of the hurdle, lean-
ing forward with hands on the wall or fence. The trail leg is pulled through over
the side of the hurdle high and tight, with the knee coming up underneath the
armpit, the foot dorsiflexed with the small toe pointed up, and the heel drawn close
Fig. 11-5.
Lead Leg Punch-Ups.

271
C h a p t e r 1 1
Training Hurdlers
to the hip. As the foot passes over the hurdle, the knee pulls through high and is
driven toward the wall. The foot then sweeps down and begins another circuit over
the side of the hurdle (see Fig. 11-6).
Running Hurdle Drills
Over-the-Side Drills: 3–5 Hurdles
Lead Leg
• Quick-Step. Fast lead leg over the hurdle with five short prancing strides between hurdles.
• 3-Step. ¾ speed with shorter hurdle spacings.
• 3-Step. Full speed with normal hurdle spacings.
• 1-Step. Full speed with 10–12 foot spacings.
Coaching Points
• Active cut-step taking off into the hurdle.
• Quick lead leg attack of the hurdle.
• Knee drives to the top of the hurdle with the heel tucked under the buttocks and the
foot dorsiflexed.
• High point of the takeoff trajectory is achieved directly above the hurdle.
• Lead leg aggressively snaps down coming down off the hurdle.
Trail Leg
• Quick-Step. Fast lead leg over the hurdle with five short, prancing strides in between.
• 1-Step. Full speed with 10–12 foot spacings.
Coaching Points
• Heel moves quickly to the buttocks as soon as the takeoff foot leaves the ground.
• Trail leg circles the hurdle without pause in one continuous motion from takeoff to
touch-down.
• Trailing foot is dorsiflexed with the small toe pointed up throughout the arc of the
trail leg.
• Trail leg knee is pulled forward and then the trailing foot pushed down during the
clearance phase of the hurdle. (The hurdler should imagine the lead leg and trail leg
are racing each other.)
Fig. 11-6.
Trail Leg Circles.

272
C h a p t e r 1 1
Training Hurdlers
Over-the-Top Drills: 3–5 Hurdles
• Quick-Step. Fast lead leg over the hurdle with ﬁve short prancing strides
in between.
• 1-Step. Full speed with 10–12 foot spacings to the ground.
Training Periodization Plan for the High School Season
Training for all events should follow the concept of periodization which divides train-
ing into a cycle of several phases. Periodizing training allows hurdlers to emphasize
particular types of training and skills during a speciﬁc period of the season. Other
types of training are not neglected, but are emphasized less during that period.
The components of hurdle training are numerous and complex. As a rule, three
to four weeks seems to be the maximum period during which athletes can sustain
improvement with any one type of training. After that, training yields less improve-
ment. During a two-to-four-week training phase, primary emphasis should be given
to one type of training, secondary emphasis should be given to another type of train-
ing, and somewhat less emphasis (maintenance training) to a third.
Within any training phase, it is unwise to include more than three quality training
days per week, including races. The remaining days should be easy training and
recovery days.
Training is stress. When a coach is planning the training of a group of athletes, strong
consideration should be given to how stress is going to be introduced and managed.
Recovery is an essential component of all training because improvement occurs during
recovery when the body rebuilds to adapt to the stresses that have been introduced.
Training Hurdlers with a System
A system of training uses several methods of training within a seasonal training cycle.
The following is recommended as a hurdler’s training cycle for the traditional high
school track season:

273
C h a p t e r 1 1
Training Hurdlers
Summary
Preseason
The training emphasis for hurdlers should be on establishing an endurance base,
enhancing rhythmic skills, strength and ﬂexibility, with some attention to speed.
Early Season
Training emphasis should be on reﬁning hurdling technique, sprint mechanics, general
sprint conditioning.
Mid-Season
Training emphasis shifts to hurdle stamina using drills and repetitions over 6–12 hur-
dles, and sprint stamina through interval training. Mid-season training should conclude
emphasizing speed through quality sprint reps and hurdle drills at full racing speed.
Late Season
Hurdle training emphasis through the league, section and state qualifying meets
should focus on low-volume, high-quality technique training, recovery, and racing.
Preseason 1 Aerobic Running Circuit Training
2 Circuit Training Aerobic Running
Early Season 3 Repetition Training Speed Drills
4 Repetition Training Speed Drills
Mid-Season 5 High-Lactate Training Speed Endurance
6 Speed-Endurance High-Lactate Training
Late Season 7 Peak Speed Training High-Lactate Training
2-4 wk phase primary emphasis secondary emphasis

274
C h a p t e r 1 1
Training Hurdlers
planning aids for developing your training system
Running warm-up:
Pre-stretch plus:
Build-ups: Technique sprints:
Stationary hurdle Drills:
Lead Leg Trail Leg Circles
running hurdle drills:
X 1-Step Drills over H
X 1 Alt. Lead Drills over H
X Fast-Step Drills over H
X Lean Drills over last H
Workout:
q X Block Starts over H
q X Full Flights
q Hurdle Progressions
q Sprint Workout
Warm-down:
rhythmic Plyometric Drills:
Power Plyometric Drills: Running - Bounding - Hopping
Weight Training Circuit:
H urdlers workout
Sequence Date:

275
C h a p t e r 1 1
Training Hurdlers
Running warm-up:
Pre-stretch plus:
Workout:
q X Full Flights
q Sprint Workout
Warm-down:
S A M P L E 1 0 0 M / 1 1 0 M H urdlers workout
Sequence Date:
3 3
3
1
2
3
4
6
8
5
Mon April 9
8 x 60m
10 10
800m7
1600m surging straights of last 2 laps
3
5 1
5 2
5 2 (9yd / 7.5m spacings for F-S)
2 x 3H-5H-7H

276
C h a p t e r 1 1
Training Hurdlers
Running warm-up:
Pre-stretch plus:
Workout:
q X Full Flights
q Sprint Workout
Warm-down:
S A M P L E 3 0 0 M H urdlers workout
Sequence Date:
3 3
3
1
2
3
4
6
8
5
Mon April 9
8 x 60m
10 10
800m7
1600m surging straights of last 2 laps
3
4 2 (in lanes 5-6-7)
5 4 (20yd spacings)
2 x (200m-30sec. rest-200m), 5 min. between sets
Both legs!

277
C h a p t e r 1 1
Training Hurdlers
Head and Chest
• Chest on thigh; chin in advance of knee.
• Head no higher than normal sprinting position.
• Eyes focused on the next hurdle at takeoff.
• Shoulders level and parallel to the hurdle.
• Hold forward lean until foot makes contact with ground.
Lead Leg
• Drive knee, don't kick foot, to the hurdle.
• Toe pulled back—not pointed at hurdle.
• Reach bent leg over hurdle.
• Begin snap-down when heel—not hips—reaches hurdle.
• Don't "hook" hurdle.
• Drive off ball of foot; don't drop onto heel.
Trail Leg
• Knee tucked under armpit—not ﬂat over hurdle.
• Heel close to hip.
• Toe pointed forward—not back.
• Pull knee over hurdle; push foot to track.
Lead Arm
• Eye level at takeoff.
• Upper arm parallel to lead thigh.
• Arm bent 120-degrees during reach and pull-back.
• Hands sweeps back below trailing knee.
Between Hurdles
• Vigorous drive off hurdle into long ﬁrst stride.
• Good high-knee sprint action on balls of feet.
• Slightly shortened last stride to hurdle.
• Takeoff approximately 7 feet from hurdle.
• Full extension from takeoff leg.
hurdle techni q ue checklist

278
Training Distance Runners
For high school athletes, the distance races are those events 800 meters
or longer. The distances distinguish themselves from the other events
in track and field by their reliance on aerobic fitness rather than raw
speed or power. This difference requires special forms of training that
demand a special dedication to training and competition. Distance
runners develop gradually, often taking years to reach their potential.
But like all athletes, distance runners must train not only for fitness
but also to compete.
12
C h a p t e r

279
C h a p t e r 1 2
Distance training begins with a simple concept. In order to develop as a distance run-
ner, a young man or young woman needs to improve his or her cardiovascular system.
In order to do this, they must learn to enjoy training. That enjoyment may take many
forms: the joy of working hard to achieve a goal; the joy of working daily with team-
mates; or, of course, simply the joy that many athletes gain from running itself.
Some distance athletes come into the sport already enjoying the training aspect while
others can eventually be taught to learn to enjoy distance running.
The are four distinct training periods that every successful distance program encom-
passes: a conditioning or base period, a pre-competition period, a competition period
and a transition period.
The key for the continuous progression of a distance runner each season, each year
and during their careers is to gradually, progressively increase the volume, intensity and
duration of their workouts during each of the four training periods.
Done right, the runners will most likely remain healthy and fresh, show constant
improvement and run their best races during the championship section of the season.
Done wrong, the runners may become injured, fatigued, lethargic, and they may even
digress rather than progress – not to mention they may run their worst races of the
year during the championship season.
A Philosophy for Coaching the Distance Events
In some aspects, training distance runners may be the easiest coaching assignment in
track and field. Basically, if a coach can get his or her athletes to run reasonably hard
distance training every day they will be somewhat successful; however, it can also be
the most difficult event area to coach due to the fact that if an athlete has been over-
trained or undertrained by the time the championship season begins, there is not
much the coach can do to remedy the situation. Training distance runners is not the
same as with coaching a technique event, such as the pole vault or discus throw, where
the coach and athlete can go out to the track and analyze and correct a problem in one
or two training sessions.
Therefore, coaching distance runners requires a great deal of thought and preparation.

280
C h a p t e r 1 2
A coach must truly understand the demands of the events and the capabilities of the
athletes under his or her care, along with possessing a sound philosophy that will help
all achieve the goals set forth by the athlete, coach and team.
Creating a distance philosophy is not easy; in fact, it may be one of the most difficult
tasks a coach may undertake, but if well thought out and carefully followed it can be
the cornerstone of years of success.
First of all, that philosophy must fit within the scope of the entire track and field pro-
gram. Second, it should be a philosophy that a coach can live with and turn to in times
of question. And, finally, there are many different philosophies that can be successful
– just because one coach’s philosophy is successful at his or her school that doesn’t mean
that philosophy will be or should be right for another coach at another school.
Periodization for Distance Training
The key to being able to develop a sound distance training philosophy is to have a
solid understanding of the concept of Periodization.
Periodization is the division of a training year into a cycle of several phases—each
phase devoted to different training methods and objectives. Periodized training allows
runners to emphasize a specific type of training during a phase within a year-long
training program. Other types of training are not neglected during each training
phase—they are simply less emphasized.
Conditioning Phase or Base Period:
Within the scope of the traditional high school year, the conditioning or base period
is basically the summer months for cross country and the winter months for track.
It is important for a coach to understand during the initial development of the base
period, the athlete will most likely be sore for a minimum of three weeks.
Training should begin easy and there should be gradual increases in the time or
distance run during training sessions. All physiological gains are made during periods
of recovery; therefore, it is important to build recovery or rest into this phase as well
as every other training phase.

281
C h a p t e r 1 2
In this training phase, specifically, planned recovery is extremely important since the
intensity of single workouts may not be as great as it is in other phases; however, the
volume of work and the accumulative effect of that volume will take its toll (perhaps
later in the competitive season) if proper recovery is not planned into the training.
All the basic principles of training come into effect during the base phase. Most
significant are the overload principle, the law of accumulation and the principle
of specificity.
An excellent guideline to follow in this phase is the “10% rule”– meaning after the
initial three weeks of training, volume (miles or minutes run) should not increase
much greater than 10% from one week to the next week.
In the base period, all facets of the training program are introduced. A week of
training most likely would include a steady state (long run) day, a pace day, a tempo
workout day, recovery days and a complete or active rest day.
A steady state day should be a continuous run accounting for up to 20% to 25% of
the total weekly mileage or time run.
Pace day should include running at “race pace” or faster for segments of between two
minutes to six minutes.
Tempo days could very easily be referred to as the oxymoron of workouts. That is
because tempo pace is best described as “comfortably hard.” A good guideline for the
pace to be run during tempo work is one minute slower than three-mile race pace.
For example, if a girl can run a three-mile race in 19:30 her race pace would be 6:30
per mile; consequently, her tempo workout pace would be approximately 6:50 to 7:00
per mile.
The tempo portion of the run should be between 10 and 20 minutes for most
runners. The more experienced and more fit the runner, the longer the duration of
the tempo portion of the run can be.
Recovery days are best described as easier runs done at a decent, comfortable pace. A
good guideline for the pace to be run during recovery work is two to three minutes
slower than three-mile race pace. Once again, for the girl who can run a three-mile

282
C h a p t e r 1 2
race in 19:30, her pace for recovery workouts would be approximately 7:30 to 7:45
per mile depending on the distance of the run.
Along that line, one important aspect of recovery running a coach should monitor
closely is recovery runs should not simply be slow jogging done at 10 minute or
slower per mile pace. Even if athletes are doing a recovery workout, they can still
make gains in cardiovascular fitness if the run is not done “too slow.”
Recovery runs are usually placed in the overall training schedule immediately
following hard training days—this follows the hard/easy principle first established by
Bill Bowerman at the Univeristy of Oregon. This hard/easy principle allows time for
the body to recover. It is not uncommon to plan for two easy recovery days in a row if
the coach observes his or her runners are not sufficiently recovered from the previous
hard workout.
A sample week workout during the base period might follow this schedule:
Monday: Steady State (Long) Run
Tuesday: Recovery
Wednesday: Pace
Thursday: Recovery
Friday: Tempo
Saturday: Recovery
Sunday: Active Rest Or Complete Rest
The most important part of this conditioning phase of training is to work on the
weaknesses both of the team and the individual runners. The primary weakness for
most athletes at this time is usually their cardiovascular fitness; thus, the primary goal
of the base period is to get the athletes in better shape.
Pre-competition Phase:
After creating the base, the athlete’s training should transfer into the pre-competition
phase. While this phase may actually include some early season competitions, the pur-
pose of this phase is to physically and mentally prepare the body for racing on the track.
In this phase, aerobic capacity should continue to be enhanced. Weekly running time
or distance should continue to be increased as the quantity and quality of pace seg-
ments and the length of the steady state run should also be increased; however, it is

283
C h a p t e r 1 2
important to note that coaches should not increase intensity and duration on the same
day. One week, there can be an increase in the intensity of the workout and the fol-
lowing week, the distance of the segments run or the total workout can be increased.
Race simulation and race tactics should be introduced into workouts in this phase.
Examples of this type of training would be running segments of 100, 200, 300 or 400
meters at race pace daily so the muscles are educated as to race pace.
Surging runs, race starts, race finishes, effective running mechanics and proper pre-race
workouts are all important aspects to add to the athlete’s racing arsenal at this time.
Race pace workouts can be run using three speeds: date pace, goal pace and dream pace.
Date pace is the actual pace the athlete is running presently in races. For example, if
a boy is currently running 4:44 for 1600 meters during his races his date pace is 1:11
per 400 meters.
Goal pace is the realistic expectation for middle to late season race times. If our same
boy currently running 4:44 for 1600 meters realistically can run 4:28 by mid-to-late
season, then his goal pace is 1:07 per 400 meters.
Dream pace is the ultimate goal of the athlete for this season. Our current 4:44 1600
meter runner may have aspirations to break the 4:20 barrier this season—his dream
pace would then be under 1:05 per 400 meters.
Both the coach and the athlete need to have input in determining the goal pace and
the dream pace. While it is wise to be a tad conservative on these predictions, the
enthusiasm of the athlete who is willing to do the work should never be stifled.
As the athlete becomes more fit, it is important for the coach to encourage negative
split runs. Negative split means running the second half of the run faster than the
first half. The purpose of this training is while many runners can perform extremely
well early in the races, few athletes can maintain the same cadence during the middle
or latter portions of a race. If athletes perform negative split runs, they will be
teaching their bodies to run faster and more efficiently when the body is fatigued.
Another way to enhance the ability to run fast when tired is to do race pace or faster

284
C h a p t e r 1 2
strides at the conclusion of the run or workout.
A weekly schedule during this period might include the following:
One steady state (long) run day
One pace day
One tempo
One race day
One pre-race day
Two recovery days.
The week might look like the following:
Monday : Steady state (long) run
Tuesday: Recovery day
Wednesday: Pace day
Thursday: Light hill day or recovery day
Friday: Pre-race day or recovery day
Saturday: Race day or tempo run
Sunday: Active or complete rest day
Competition Phase:
As the athlete moves into the competition phase of the season, competitive success is
emphasized. The length of individual workouts and the total weekly mileage or time
is maintained or slightly decreased. Pace workouts should have achieved a load of
race distance or slightly longer. The pace run should become faster and recovery time
allotted between segments should be gradually reduced. The steady state run is still a
staple of the program, but the distance is gradually decreased as the pace is increased.
Tactics become more important as the athlete learns from his or her race experiences.
During this part of the season, athletes start focusing on their individual race
strengths with coaches helping train athletes to use those strengths in races.
Early in the competition phase, many athletes may be running two competitions a
week – a dual meet during the week and an invitational during the weekend. There
is no more intense workout than a hard race, so coaches should factor that into an
athlete’s season training plan. In a week where an athlete must race hard two of those
seven days, the other training days of that week may incorporate only recovery, pre-
race and post-race days with little other types of work.

285
C h a p t e r 1 2
Early season competitive phase week;
Monday: Steady state run (during the competitive phase it may sometimes
take 10 days to two weeks to schedule in the steady state run.)
Tuesday: Moderate pace
Wednesday: Pre-race
Thursday: Race
Friday: Recovery
Saturday: Race
Sunday: Active rest or complete rest
Championship portion of competition phase week:
Monday: Moderate run
Tuesday: Pace
Wednesday: Recovery
Thursday: Moderate pace (condensed portion of pace workout) or tempo run
Friday: Pre-race
Saturday: Competition
Sunday: Rest
Transition Phase:
Following the end of the championship season, distance runners must transition from
track to prepare for cross country.
The first portion of the transition phase is a good time for athletes to take a complete
break from running. Many athletes take 14 to 21 days off to allow the body and
mind to heal. Some do alternative forms of exercise such as cycling, swimming or
various exercise machines. Others just rest.
Obviously, aerobic capacity will slightly decline while the athlete is resting; however,
the body and the mind may need some healing during this time.
After this break from training, the athlete can begin with easy running to work back
into the daily effort needed to be successful. That easy running will transition the
athlete into the conditioning phase for the next season to once again rebuild and
extend the athlete’s training base. The bigger the base, the more consistent the peak
tends to be at the conclusion of the next season.

286
C h a p t e r 1 2
Universal Principles of Training
Training for all events should recognize the following principles:
Overload
The body makes a Specific Adaptation to gradually Imposed Demands. As discussed in
previous chapters, this is the SAID principle. In very simple terms, overload means
increasing the volume or increasing the intensity of the workout. Over time, the body
will adapt to a certain load. If the load is not gradually increased over time, the athlete
will no longer progress with the same load. The basic belief is that for most athletes
it takes somewhere between 21 and 28 days to adapt to a certain training load. The
overload principle should also be applied during the career. Each year, for most ath-
letes, the load should be increased by approximately 10%.
Allowance for Recovery
Training must provide days of rest and recovery. Improving the quality of an athlete’s
“hard” training sessions enhances racing fitness. However, distance runners must
recover from yesterday to be able to train hard again tomorrow! Training hard for several
days in succession inevitably leads to injury, illness, or loss of motivation. All physi-
ological gains are made during periods of rest. It is important to note that rest is not
an absence of training but part of training.
Toughening or Callousing
Part of an athlete’s training must prepare him or her for the demands of all out rac-
ing. Runners have to do some training at maximum effort almost year round. Mental
toughening is also an important part of training. Part of the steady state or long run
for distance runners is to help them become mentally calloused for the demands of a
fast paced distance race. Likewise, it is important to have distance runners do some-
thing at race pace or faster at the conclusion of almost every distance workout.
Additionally, most track distance races start extremely fast. Distance runners should
surely do some training that mimics the fast start they will encounter in virtually all
races on the track; however, it is the athlete who can maintain pace in the middle and
accelerate at the end of a distance race who seems to find more racing success. It is
extremely important to teach the body to run fast when tired.
Specificity
To be effective, training must be specific to the demands of the event. Thus, in order
to be a successful distance runner, an athlete must prepare by doing distance workouts.

287
C h a p t e r 1 2
Also, if an athlete is going to double in a meet, it is important to train specifically for
this occurrence. Included in the law of specificity is teaching distance runners the
proper start and finish techniques for races. Proper lane usage is also a specific skill
needed to be a successful distance runner.
Law of Accumulation
While not one of the universal principles of training, the law of accumluation is an
important concept to teach a distance runner. The quality and quantity of workouts
help improve the aerobic capacity of a distance runner. Each and every run, race and
workout add to this law of accumulation. With each and every season of running,
the distance runner expands his or her ability to train. Thus, days and seasons run-
ning add up. This is why most cross country coaches would like their team members
to participate in track and field and most distance coaches in track and field strongly
encourage their athletes to participate in cross country. Other sports can also help
with the law of accumulation, but cross country and track and field best help to adapt
to the law of specificity when it comes to distance running.
Gender Considerations
This is also not one of the universal principles of training, but both training age and
gender should be considered when preparing workouts. Training age (years an athlete
has specifically been training to be a distance runner) rather than chronological age
should be the primary concern in determining training loads. Sometimes coaches for-
get that mature looking freshmen or sophomores may have never trained as a distance
runner before. Even though those new athletes may have the speed to keep up with
the veteran runners, the volume might do them in over the next several weeks.
Young female runners are often capable of keeping up with the veterans in races and
sometimes workouts. Once again, it is important to consider the training age of the
female athlete when determining her volume.
It is far better to undertrain young athletes. This usually ensures a longer, more
productive career. Most athletes can see a 2 to 5% improvement in performance each
year. Probably the greatest improvement for both male and female athletes will come
during the second year of competition.

288
C h a p t e r 1 2
Basics to Teach for Racing Success
A. Race warm-up
Race warm-up should be similar to the warm-up for a pace or interval day. The
core temperature of the body needs to be increased and athlete should be ready to
race when he or she gets to the starting line.
Warm-up is completely different with each athlete. Some runners need very little
warm-up and they are ready to go; in fact, longer warm-ups may actually hinder
their performance. On the other hand, other runners may not only need longer
warm-ups but also warm-ups of higher intensity.
Coaches should have athletes experiment with longer and shorter and higher and
lower intensity warm-ups in pre-competition training sessions to determine which
type of warm-up works best for that athlete.
B. Race starts
The body has three basic energy systems: the alactic, the aerobic and the anaerobic
systems.
The alactic system is a very quick energy system that is sometimes used when a
person is frightened. The average athlete has about eight seconds of this energy
stored in the body. If it is not used at the beginning of a physical effort, it basically
is lost and cannot be used at any other time. Therefore, athletes should be taught it
is important to start a race fast for the first five to six of those eight seconds before
settling into pace – doing so will not negatively impact how the body responds
physiologically throughout the remainder of the race.
C. Race cool-downs
To enhance recovery, an athlete should begin a cool-down within five minutes of
the conclusion of the a race. A very simple distance cool-down is to walk one lap,
jog two laps and then stretch out the body.
D. Preparation for a second race
The second race of the day in a track meet will require less warm-up than the first.
However, the athlete will probably not feel as good warming up for, or at the begin-
ning of the second race. It is important to remind the athlete that this feeling will
go away in the early portions of the race, provided the athlete did a proper cool-
down after the first race and a significant warm-up prior to the second race.

289
C h a p t e r 1 2
Tactics to Teach
A. Race starts
There are a variety of race starts.
Coaches should practice often with their athletes the abbreviated commands used
by a starter for a distance race, 800-meter staggers and moving in on the back
stretch, waterfall starts, and what to do if there is a recall at the start.
Even though a runner’s starting position in a distance race is certainly not as im-
portant as in a sprint race, distance runners should be taught to place their “smart’
foot back (see Sprint Section) and have their “strong” foot in a flat-footed position
on the start line.
B. Surges
Surges are moves in the race where the pace is picked up in an effort to break away
from a pack or an individual or to pass an opponent.
Athletes cannot just decide they want to surge in a race—their workouts should
simulate surging to prepare athletes both physically and mentally to put in surges
and to be able to react to them if their opponent tries surging.
Between surges, the runner should settle back into race pace.
C. Long kicks
Kicks at the end of the race are usually not based on all out speed. They are usually
based on strength. While some runners have more fast twitch fibers allowing them
more top end speed, many runners spend time developing strength over a greater
distance. Thus, those with more strength rather than flat out speed tend to use a
longer kick. Some may start their finishing acceleration up to 800-meters prior to
the finish of the race. Many wait until the last 100 meters to use the “kick.” The
long kick can occasionally eliminate the effectiveness of the short kick.
D. Taking the kick out of the kicker
For those runners who do not have the huge kick, they should try to push the
pace early in the race to put a gap between themselves and the kickers or to wear
the kicker down so his or her kick is not as strong at the end of the race.

290
C h a p t e r 1 2
As with all tactics, coaches should simulate this tactic during practice. A good way
to practice this is to start the first two or three segments in a repetition or interval
workout at three to five seconds faster than race pace.
E. Turns
There are different philosophies on turns. Some coaches request their athletes
never pass on the curve as it requires the runner to run a longer distance. Other
coaches like the element of surprise by passing on the curve.
A good tactic to teach runners is how to move on the curve and how to protect
space on the curve. Thus, if and when the athlete needs to either move on the curve
or protect position on the turn, it will be something he or she has already practiced.
F. Race plans
All athletes should have a race plan for every race they run. This race plan should
be mentally practiced at least two days prior to the actual race. Additionally, there
also should be an alternative race plan in case the original plan changes in the
middle of the race.
Types of Racers
A. Front runner
Front runners are athletes who like to push the pace from the beginning. Steve
Prefontaine, one of the United States greatest distance runners ever, was a front
runner. Front runners seem to be more successful on the female side.
B. Push in the middle
Usually someone who pushes the middle of the race maintains contact with the
lead back through the first portion of the race. If the race is an 800, the middle
push may be from the 300 mark to the 500 mark. For the 1600, from 600 to
1000 is the usual area of the “middle” push. The 3200 may see a movement at the
1000 and then again at the 2000 mark of the race.
C. Sit and kick
A tactic used many times against a “front runner.” A sit and kick type runner needs
to maintain contact with the leaders or a specifically identified opponent in order
to be close enough to use the kick at the end of the race. Kicks are of varying dis-

291
C h a p t e r 1 2
tances. This is a tactic that sometimes backfires for the better runners as the leaders
gain confidence and may find a kick of their own at the end of the race.
D. Negative split
Running a negative split means running the second half of the race faster than the
first half of the race. While runners can be successful with this tactic if they have
a tremendous sense of pace, most runners tend to fall into the rhythm of the race.
It is seldom used to win championship races unless the negative split runner is
considerably better than the field. This tactic should be practiced on pace days in
order for it to be successful.
E. Run for time
This is a very good tactic for beginning runners to learn the cadence of the race.
If the goal is to hit a certain time, runners can shoot for specific splits as the race
progresses.
Today, with the increased use of qualifying times in many state and section meets,
running for time might also be an excellent tactic for elite runners.
However, it should be stressed to young athletes that at the conclusion of the race
they should be racing the competition instead of the clock.
F. Never up, never in
In almost every high school mile or two-mile race on the track, the eventual win-
ner of the race can be identified as one of the runners in the lead pack just prior to
the half way point.
This requires all athletes who feel they have a chance to win a race to stay in con-
tact with the lead pack; therefore, the goal is to stay in contact with the leaders of
the race – “to stay up in the pack.”
This is a tactic where an athlete needs to be keenly aware of the circumstances that
unfold in a race. If the lead pack moves out at a pace that is obviously too fast,
athletes need to recognize that fact and not get “sucked” up into that pace; how-
ever, to allow the front pack to build up a tremendous lead may cost the athlete at
the end of the race. Athletes need to be cognizant of what is happening in a race
and recognize when the leaders are going faster than anticipated; therefore, a plan

292
C h a p t e r 1 2
to “split the difference” is appropriate. The athlete doesn’t go with the upfront
leaders running too fast of a pace, but he or she also does not sit back and stay
cemented to his or her original race pace plan. The athlete “splits the difference”
by picking up his or her originally planned pace to stay close enough so when the
lead pack does settle down, he or she is close enough to rejoin the pack without
expending too much effort.
G. Even splits
Although difficult to do in the light of the uneven splits run in most high school
races, even splits is physiologically the most efficient manner in which to run a race.
Most races go out too quickly, slow in middle, and then finish in a flurry. If an
athlete is able to run even splits, theoretically, he or she should have more energy
at the conclusion of the race.
Running even splits requires a great deal of patience at the beginning of the race
as the field pulls away. Most runners, lacking experience, do not have enough
confidence or knowledge of pace to make the even pace happen; however, when
this tactic is learned, it can be extremely successful
H. Running for the team versus running as an individual
In many track meets distance runners are often called upon to run as many as
three or four races in a single meet for the team to be successful.
In order to be strong in later events, a distance runner may run slower than his or
her best effort in order to score points but conserve energy for efforts later in
the meet.
Even in these “easier” efforts, athletes need to begin each race with a solid race
plan as to how to accomplish the goal. Many inexperienced high school runners
may have trouble with this concept and actually expend too much energy in
running a race that is different than normal.
This is a tactic that needs to be “rehearsed” in preseason meets before a team really
needs to use it in a “big meet.”

293
C h a p t e r 1 2
Running Terms
800 METERS, 1600 METERS, 3200 METERS
The different methods of training for distance races vary in purpose, intensity and duration.
The specific demands of racing at distances of 800–3200 meters and a runner’s strengths
and weaknesses should determine what that specific runner should do in training.
As a rule, early season training should target areas of weakness and late season training
should focus on exploiting the athlete’s racing strengths.
Regardless of the methods, the key to an effective training program is detailed plan-
ning, the judicious use of rest and recovery, and a gradual increase in training intensity
and duration.
Steady state training
Steady state runs are long runs that should be done at a pace that can be maintained
for 40–60 minutes with relative ease. Scientists estimate the ideal intensity for a steady
pace run is a pace equivalent to 70% of the individual runner’s VO2 max (approxi-
mately one minute per mile slower than 10K race pace).
A 40–60 minute continuous run at this level of intensity has been found to be ideal
for developing the cardiovascular system, improving the capillarization of muscles, and
enhancing the body’s efficient use of its energy sources.
These long, steady run periods of training programs serve as the “base” or “founda-
tion” that is absolutely necessary to allow for longer, more intense training later in the
training cycle.
It is important coaches not fall into the “more is better” philosophy when dealing
with steady state training. While increased volume is certainly helpful, too many miles
tends to destroy the snap in the legs and the excitement in the brain; furthermore,
there is substantial evidence to indicate that extensive miles run at a young training age
can actually reduce the additional capillarization that will occur during heavy training
when an athlete reaches physical maturity.
TEMPO PACE (THRESHOLD) TRAINING
Tempo pace (threshold) running is designed to train runners at their lactate

294
C h a p t e r 1 2
threshold–the level of running intensity where lactic acid begins to accumulate rapidly
in the blood. Continuous running at tempo pace usually can be maintained for 20–30
minutes. Theoretically, regular threshold training will enable the runner to maintain a
faster race pace with no greater accumulation of lactic acid.
Threshold training can be either continuous or segmented. Continuous threshold
training is usually referred to as tempo running. Tempo runs are typically 20–30 min-
utes at a pace about 20 to 40 seconds per mile slower than 5K race pace, with warm-
up and cool-down running included before and after the run. The purpose of tempo
runs is to train at an intensity level just short of hard pace running.
Segmented threshold training is also referred to as tempo repetitions or tempo in-
tervals. This training consists of a series of shorter segment runs, usually lasting 90 sec-
onds to eight minutes, with short recovery periods of one-minute or less in between.
Distances of 600–2000 meters are best used for tempo repetitions. A entire tempo
interval workout could last as little as 30–40 minutes, including recovery time.
REPETITION TRAINING
Repetition training can be defined as repeated running segments of varying distances
with the rest period between the segments being approximately twice the length of
time as it took to complete the previous running segment.
Repeated segments of one to six minutes of fast running have been identified by exer-
cise physiologists as ideal repetition training for distance runners. Repetition training is
designed to increase running efficiency by decreasing the oxygen cost of running and
to help the runner become more pace and rhythm conscious.
The running intensity used for repetition training should be desired race pace. Repeti-
tion training allows the athlete to attain and sustain VO2 max repeatedly. Repetition
training enables a runner to train at V02 max for a cumulative period of time greater
than could be sustained in a single race. A total time of 20–25 minutes, not including
recovery time, is a good upper limit for a repetition training session.
INTERVAL (HIGH LACTATE) TRAINING
Many coaches and athletes use the terms “interval training” and “repetition training”
interchangeably, but they are vastly different types of training. What is the interval in a
workout? The interval is the recovery period between bouts of running.

295
C h a p t e r 1 2
In a repetition training session, the objective is to run specific segmented distances
repeatedly at race pace, so the recovery ratio is approximately 1:2 run to recovery time.
In an interval training session, the objective is to run specific segmented distances
repeatedly at a high lactate blood level, so the recovery ratio is 2:1 run to recovery—in
other words, the time rested (interval) between running segments is half the time it
took to run the previous segment.
Interval training should be included more often in the training of 800m and 1600m
runners than 3200m runners because those races are 30–50% anaerobic. Research has
shown that middle distance runners need to be able to tolerate high levels of lactic
acid because it is a byproduct of anaerobic running. Research also shows that middle
distance runners must be able to produce high levels of lactic acid because it becomes
an energy source in the absence of oxygen via the Krebs cycle.
The intensity of interval training should be faster than race pace because its purpose
is to produce lactic acid by performing the last portion of each run anaerobically. The
duration of each segment run in an interval session is typically 15–90 seconds (100–
600m). The recovery ratio should be 1:1 or 2:1 run to recovery. The idea is not to fully
recover but to maintain a high level of lactic acid in the blood throughout the workout.
The purpose of interval training is to enhance the athlete’s ability to produce and
tolerate lactic acid during a race. Interval training is intense, demanding, and painful.
It should not be included more than once a week in a training plan, and some athletes
may require two to three days of easy running to recover fully from a hard interval
training session.
SPEED PLAY (“FARTLEK”) TRAINING
“Speed play” is the literal translation of the Swedish word “fartlek.” Speed play is a com-
bination of fast and slow running; that is, a continuous running session that includes
bursts of fast running followed by periods of easy running for recovery. Ideally, speed
play is done over varied terrain, including hills. The length of the fast bursts and easy re-
covery runs is unstructured so the athlete has a genuine feeling of playing with speed.
Using the above definitions of repetition and interval training, the speed and rest
intervals in a fartlek workout determine if that specific workout is a repetition or
interval workout.

296
C h a p t e r 1 2
SURGING TRAINING
Surging is continuous running similar in design to speed play; however, while speed
play alternates periods of sprinting and jogging, surging is steady-pace running punc-
tuated with periods of faster running up to threshold pace, well below sprint speed.
Typically, a surge in the midst of a steady-pace run would be an increase in pace of
30–60 seconds per mile, depending on the length of the surge.
The purpose of surging training is to enhance the runner’s ability to initiate and re-
spond to changes in pace and to recover at steady-pace running speeds.
STRIDES:
There are a variety of strides a distance runner might use during a workout week.
Usually, strides are done at the conclusion of a warm-up or at the conclusion of the
day’s workout. Strides may be done at start pace, race pace, surge pace or just a little
faster than that day’s particular run pace. Strides can also be done in order to focus on
proper running mechanics.
Whatever the particular purpose of the strides, the athlete should focus on that specific
purpose. Done right, strides can be used to reinforce proper technique and a variety of
race tactics. Done incorrectly an athlete can reinforce improper muscle memory and
create bad habits. Quality rather than quantity should always be the goal for strides.
While they add little to the total volume of the day, strides can greatly improve the
performance of an athlete.
WARM-UP:
A proper warm-up for a distance runner should start with six or more minutes of easy
running. During this time period, the pace can be varied; however, since the primary
function of the warm-up is to increase the core temperature of the body, it is best to
have the warm-up run go from slow to faster.
After the conclusion of the running warm-up an athlete should go right into form
drills which can further help to warm-up the athlete while at the same time be used to
help teach proper running technique, foot placement and help build running strength.
Upon completion of drills strides can be included. Some longer strides – as much as
300 meters – may be included.

297
C h a p t e r 1 2
At the conclusion of this complete warm-up, athletes will then go directly into their
running workout.
Static stretching should be done at the end of the workout.
Coaches should have athletes experiment with their warm-ups during workouts and
preseason races. Some athletes need much more warm-up than others to race effectively.
COOL-DOWN AND STATIC STRETCHING:
After the conclusion of the running workout, athletes should gradually bring their
heart rate down. Four or more minutes of light jogging followed by a systematic ap-
proach to static stretching can help the athlete improve range of motion and greatly
aid with recovery. Note that static stretching is suggested at the conclusion of the
workout well after the core body temperature is completely warmed up.
BODY STRENGTH EXERCISES:
While it would be great to have every distance runner in the weight room for a major
muscle group strength workout, the SAID principle and the lack of time may make
this difficult.
For the vast majority of distance runners, it is more important to run and learn proper
running techniques than to use valuable training time in the weight room.
Core strength exercises and body weight resistance exercises can help improve the
strength of a runner and these can be done quickly and efficiently outside of a weight
room during practice. Sit-ups, crunches, bicycles and a variety of abdominal workouts
can help strengthen the core muscle area. Push-ups, push-up variations, pull ups and
bar dips can help improve upper body strength.
As with distance workouts, these workouts should be periodized. Start gradually and
increase the volume over the course of the year. Also, coaches should demand these
exercises be done correctly as muscle memory is just as important in these activities as
in running mechanics.
Teaching Distance Running Mechanics
The body moves as a system of levers. Each of the body’s levers (the head, torso, arms
and legs) obeys the laws of physics and motion. The three primary components of run-
ning mechanics are posture, arm-action, and footstrike.

298
C h a p t e r 1 2
RUNNING POSTURE
Distance runners should not be told to try to lean forward. Forward lean is simply a
function of acceleration. When the body accelerates, it will lean forward.
Acceleration is accomplished in the first several strides of a distance race. After that,
the position of the torso should be erect, directly above the hips. When an athlete is
running, each leg swings forward-and-back like a pendulum. The sweep of that pen-
dulum swing is the length of the stride, which is largely determined by the height to
which the knee swings forward.
When running erect, the weight is centered in the body just above the hips. Leaning
forward lowers the center of mass. You cannot lift your knees any higher than your
center of mass (one of the laws of motion), so lowering the center of mass by leaning
forward restricts knee lift, which in turn decreases the length of the stride.
WHAT TO TEACH
Teach athletes to run erect, with the torso directly above the hips, head up, chin slightly
tucked, chest out, shoulders back.
ARM-ACTION
The arms get everything moving in the direction a runner wants to go—forward.
Swinging the arms past the mid-line of the body, causes the shoulders to rotate, re-
stricting the free swing of the hips. Athletes who shrug their shoulders during arm-
swing also create shoulder rotation.
To keep the shoulders square while running, the arms should move forward and back
with the hands moving forward from a point just behind the hips, slightly across the
chest, up to a point near the shoulders. The forearm and hand should move forward and
back as one piece because flexing the wrists reduces the effectiveness of using the arms
as levers by turning the elbows out. The hands must stay relaxed and cupped; clenching
fists causes the body to tense up thus reducing stride length and slowing the runner.
The arms control running. A runner’s pace is set by the cadence of the armswing.
However, distance runners cannot run with vigorous arm-action without paying a high
energy cost, so conserving energy must be a primary objective of arm action.
WHAT TO TEACH
The arms should swing forward and back with a constant arm angle of approximately
90-degrees until the ﬁnal stages of the race. The hands should be cupped and relaxed.

299
C h a p t e r 1 2
FOOTSTRIKE
Shoes significantly alter a person’s natural footstrike tendencies. Most runners would
not land on their heels and slap their forefoot onto the ground if they were running
barefoot. Today’s super-cushioned shoes allow runners to make those kinds of me-
chanical mistakes. A heel-first footstrike extends the foot in front of the center of mass
and creates a braking action at each touch down. This is called “overstriding.” The
middle of the foot should strike the ground with the runner’s weight toward the ball of
the foot and the toes dorsiflexed. A full-footed footstrike puts the foot under the hips
with the leg in a bent, weight-bearing position. This enhances a rapid forward weight
transfer as the leg fully extends off the ball of the foot into the next stride.
Important! Accelerating off the pace requires different mechanics than accelerating
from a start. Many distance runners attempt to run faster in the closing stages of a race
by taking longer strides. This results in overstriding and a loss of speed. The key to
accelerating off the pace is to create shorter, quicker levers. This is achieved by closing
the arm angles, increasing armswing cadence, and shortening the stride. Running with
the hands positioned thumbs up recruits more muscles in the forearm and shoulder to
flex the arm rapidly.
PUTTING IT ALL TOGETHER
Many young runners do not have a good feel (kinesthetic sense) for how their bodies
move. Even those who do often lose that sense once they become fatigued. A coach
should teach and reinforce proper running mechanics—this must be a constant, ongo-
ing process if athletes are to acquire efficient, rhythmic, symmetrical running mechan-
ics. Coaches must develop a critical eye for proper mechanics, correct errors, and praise
progress.
The Three Distance Races
800 Meters:
Some people look at the 800 as a long sprint while others look at it as a very fast dis-
tance race. Whatever the concept of the race, realize the 800 is the distance race that
requires the athlete to spend a great deal of time in an anaerobic state; therefore, this
should be emphasized during training. While these athletes certainly need an aero-
bic base, they also need to be on the track dealing with the discomfort of running in
oxygen debt.

300
C h a p t e r 1 2
Usually, 800-meter runners are trained in two different groups: the 400-800 runners and
the 800-1600 runners—or the sprinters moving up or the distance folks moving down.
The 400-800 folks will train very much like a 400-meter sprinter with some longer
distance repetitions in the workout. The 800-1600 will train more like a 1600-meter
runner with less distance and more intensity on the repetitions.
While many coaches and athletes tend to break this race into four segments of 200
meters, another more practical approach is to break it into three segments.
The first segment is approximately 300 meters. During this segment, it is important
to maintain contact with the lead runners (or runners of like ability). While the racer
needs to get out quickly, he or she needs to be somewhat under control. Very seldom
does the leader of the first lap of an 800 win the race unless that racer is just the class
of the field.
The second segment of the race is approximately 200 meters long. This is from the
300 mark to the 500 mark. Here, the racer can push the pace of the race or maintain
effort and get into a strong position to set up the final segment of the race which is a
300-meter cut down.
On a cutdown, the goal is to run each 100 meters just one second faster. With this
build up, the racer can accelerate over a long period of time and gradually pull away
from like ability opponents. This approach also helps the athlete segment the race and
focus on three shorter segments rather than the full race.
Emphasizing the final 300 meters as a “cutdown” will especially help the 1600-meter
runners who are accustomed to running the final 300 meters of a distance race close
to all out. The cutdown will help them to understand how to finish an 800 without
severely “tightening up” in the final 100 meters.
If a coach or athlete plans on using the 3-2-3 segmenting of the 800, it is important
that he or she also break the pace workouts into similar segments.
Sample week for a 400/800 runner:
Monday: Workout with the sprinters or hill work
Tuesday: Repetition work with the distance runners with less volume

301
C h a p t e r 1 2
Wednesday: Moderate distance run, concluding with 150 meter sprint-float-sprints
Thursday: Light sprint day
Friday: Premeet or short distance run
Saturday: Race. Depending on goals and time of the season, race distance
could be anywhere from 200 meters to 1600 meters. Most likely a
leg on the 4 x 400 relay will be included.
Sunday: Complete rest
Sample week for an 800-1600 meter runner
Monday: Moderate steady state run with distance runners. Finish with strides.
Tuesday: Repetition work with distance runners. Finish with faster strides than
pace of repetition work.
Wednesday: Moderate distance run. Finish with cut down strides at both 800
pace and 1600 pace.
Thursday: Race pace work for 800. Possible sets of 200s or 300s.
Friday: Pre-race or moderate distance run day.
Saturday: Race. Distances can be from 400 to 3200 meters. If the goal is for a
fast 800 as the season progresses, probably more emphasis on the 4, 8
and 16.
Should run a leg on the 4 x 400 relay for speed development.
Sunday: Light distance run or complete rest
1600 Meters
The 1600 meters is often considered the premier high school distance race. More
of the top-level distance runners tend to focus on this event; thus, the quality of the
fields in big 1600 races tend to be deeper than the quality of the fields in the other two
distance races.
Just as in the 800, the 1600 can be segmented into different portions. Traditionally,
coaches and athletes tend to break the race into 400-meter segments or 200-meter
segments. Traditionally, during a high school 1600-meter race, there are a couple of
break points (a point in the race where the leaders open up a gap on the field) between
500 and 600 meters and again between 1000 and 1200 meters.
Rather than the traditional 200 or 400 meter segments, a more practical break down
might be 600-400-600. In this plan, the runner stays in contact with the leaders

302
C h a p t e r 1 2
through the first 600 meters, maintains goal pace for the middle 400 meters and then
uses 200 meter cut downs over the final 600 meters.
During that final 600 meters, the first 200 meters might be at goal pace or one second
under, the second is just a second faster and the final 200 meters is at least one second
faster than the previous 200. This is a subtle way of picking up the pace and possibly
removing the huge finish from the big kicker.
Traditionally, the race slows after the 500-meter mark, so if an athlete is able to
maintain pace through this portion of the race, he or she can force the pace of the race.
Unlike the 800, where one false move may leave the racer out of the hunt, the 1600
allows more time to make up for an early racing error.
As with the 800, whatever segmenting an athlete or coach chooses to use, this seg-
menting should be practiced often during pace day. For veteran 1600-meter runners,
the volume of actual pace work may be anywhere from two times to 3.5 times the race
distance during one workout.
Sample Workout week for 1600-meter runner-Mid season:
Monday: Steady state run
Tuesday: 1600-meter based pace workout
Wednesday: Recovery day finishing with 100-meter strides at 1600-meter goal pace
Thursday: Tempo day or shortened pace workout
Friday: Pre-race or Recovery Day
Saturday: Race day or moderate distance day
Sunday: Rest day or recovery day
3200 Meters
The 3200-meter race has increased in popularity and depth in recent years. With the
increase in the number of quality cross-country teams, there has been an increase in
the quality of the athletes involved with the 3200. No longer is the 3200 the place to
which the runner with less leg speed is relegated.
The 3200 requires more volume in both daily workouts and in pace workouts in order
for a runner to be successful. Thus, the steady state run (which is usually 20% to 25%
of the weekly volume) tends to be longer.

303
C h a p t e r 1 2
Tactics also become more significant in the 3200 and should be practiced regularly. A
common practice in elite 3200-meter races involves running a negative split pace, with
the pace starting to drop with each lap after the first 1600 meters
Most 3200-meter high school races have break points in the race at 1200 meters and
2200 meters. As a result, a logical segmentation of the 3200 may be 1200-1000-1000.
With this kind of segmentation in the race, it is important to get veteran 3200-meter
runners into longer repetitions during their pace workouts. Some 3200-meter progres-
sions for elite runners have veterans doing repetitions up to 2000 meters. This length
of repetition is developed over several weeks as it is extremely challenging for any
young runner to maintain a consistent pace for this duration.
Because the 3200 requires more strength and endurance, this is usually a race for vet-
eran distance runners. Traditionally, freshmen and sophomores have focused more on
the 800 and 1600. Juniors and seniors tend to dominate the 3200 at the higher levels
of high school competition.
Number of Races in a Single Day
It is highly recommended an athlete be limited to a maximum of two distance races
in any one track meet. While a distance runner may occasionally need to triple (run
three distance races in one competition) in order to help his or her team win an impor-
tant competition, this can take a great deal out of the athlete for future competitions.
If the philosophy is for a distance runner to have a long and fruitful running career
after high school, then tripling should certainly be kept to a minimum. In most coun-
tries, it is highly unusual for a distance runner to do more than one race a day.
Over and Under Racing
A widely accepted practice for distance runners is to compete in over and under
distance races early in the season. Over distance racing helps to build up strength while
under distance racing helps to train for speed.
Examples of under or over racing for the 800 would be for an athlete to do a 400
meter and a 1600-meter race early in the season. Likewise, for a 1600-meter specialist,
the sequence might include an 800 and a 3200. For the 3200-meter specialist, both
the 800 and 1600 might be a good sequence since high school offers very few races
longer than 3200 meters and since it takes a little longer to recover from a 5000-meter
race if one is available.

304
C h a p t e r 1 2
Other Keys to Being an Effective Distance Coach
Some simple essentials to remember:
The Athletes Are Not You
You may have been able to do certain workouts or had trouble with certain workouts.
Each athlete is an individual. The true artist as a coach takes the time to paint an
individual workout plan for each athlete.
Each athlete may respond differently to workouts – one athlete may not have the vol-
ume capacity that another has or that the coach anticipates; or one may not be as into
distance running as you were as a runner; or one may have stressors outside of track
with which you never had to deal.
Quality is Always More Important Than Quantity
No magic workout, no magic number of repeats, and certainly no magic number of
miles run can guarantee distance success. For one athlete, less volume and more inten-
sity may bring far more success than more volume.
Coach Your Athletes, Don’t Time Your Athletes
While it is important to get accurate times, splits and workout paces on athletes, it
is more important to be an observer. Coaches need to be able to recognize when an
athlete is working too hard, the workout pace is too easy, the amount of rest interval is
not long enough, or an athlete is showing the first signs of an overuse injury.
Over time, vigilant coaches develop the coaching “eye” and notice those special qualities
each athlete has. By watching athletes, one can notice changes in stride or technique.
Coach All of Your Athletes
While it may appear to be more rewarding in the public eye to have “fast runners”, it
is far more important to the development of the program to coach all runners who are
willing to give an effort. Many runners who continue on with the sport will continue
to get better and better. They may become the next generation of “fast runners.” As
more runners race and train faster, the quality of all the runners improves greatly.
Have Someone Else Take Splits During a Race
Splits can teach runners a tremendous amount about race tactics and race plans;
however, it is better if coaches watch races and workouts rather than having their heads
buried in a clipboard recording times.

305
C h a p t e r 1 2
Teach runners to take splits for teammates and then discuss those splits with the team.
Often the splits can help explain good or bad races. Also, uneven splits can expose
weaknesses in the training program. They can also show strengths.
Audio Cues During a Race
Keep audio cues during a race or a workout simple and short. Also, keep them as
positive as possible. Simple cues such as “eyes up” or “hands past the hips” allow the
racer to focus on just one improvement at a time.
Comments such as “she’s killing you” probably will not help positively motivate an
athlete during a race. Most racers, if properly focused, will hear very little of what is
said; consequently, the old “concentrate” or “maintain your focus” are probably too
little too late.
Keep Athletes Healthy
Recommend athletes get a new pair of running shoes prior to each season. Many inju-
ries are directly attributed to shoes that have outlived their safe life span.
Also, error on the side of caution concerning injuries. It is better to miss a couple of
workouts or races rather than train through an injury and miss the competitive season.
It is far better to be undertrained and healthy than overtrained and injured.
Post-Race Comments
Always give the athlete a little time to digest the race before you meet with him or her.
If it wasn’t a positive experience, allow them 10 to 15 minutes to be upset with it and
then “move on.” If it was a great race, allow them 10 to 15 minutes to celebrate and
then “move on.”
A common practice for a coach/athlete discussion after a race includes talk about what
went well and what needs to be improved. Let the athlete talk first. More often than
not, the athlete will have accurately assessed the race and already have reached the
conclusions you are about to mention.
Have a Purpose for Every Workout and Every Race
A coach should never have an athlete run a race or do a workout unless the coach
knows exactly what the purpose of that race or workout is; furthermore, a coach
should be able to tell the athlete what the purpose is if the athlete asks.
Races are not workouts and should not be viewed as such. Likewise, workouts are not
races and should not be allowed to become competitions.

306
C h a p t e r 1 2
Self-Worth
Remind athletes their self-worth is not dependent on their racing ability. Remind
them no one is a bad person if all the races do not go exactly as planned. Much can be
learned from unsuccessful practices and races. Often, coaches get fooled in to a false
sense of success by an outstanding race. Great races do not make a great person.
Instill Trust in Runners
In running, it is what runners do when no one is watching that makes all the differ-
ence—a runner needs to be intrinsically motivated to do the hard training that must
be done during the base training phase; in fact, most of the workouts runners com-
plete are done out of eyesight of the coach.
Perfect Practice Makes Perfect Races
Expect athletes to work for perfection. Practice in general does not make perfect.
Constantly demonstrate how to do drills correctly and expect the athletes to do them
correctly. Muscle memory is learned regardless of how the athlete does a drill or runs
– it can be correct or incorrect. Athletes will be far more successful if all activities are
done correctly. Do not be afraid to stop a workout or part of a workout and start it
over if it is not being done correctly.
Reward With Exercise
Coaches should reward with exercise rather than punish with exercise. One of the
goals of a distance coach is to instill the love of running in his or her athletes. If ath-
letes are “punished” by being made to run, how will they ever learn to love the sport.
Coaches should allow athletes to ask to step up to more challenging workouts rather
than requiring them to do more exercise for being late to practice or being disobedient.
Show Your Passion
If the coach is passionate about the sport and honestly shows this to his or her athletes,
they will catch the fever. Likewise, if coaches are passionate about their athletes and
take an interest in them as human beings, they will probably become more excited
about the sport and about the coaching methods.
Help Create the Next Generation of Coaches
Be willing to discuss plans and workouts with athletes. The goal is to educate the ath-
letes well enough so they can eventually coach themselves and continue with the sport
for a lifetime. Reward, don’t discourage curiosity in athletes. Veterans in the program
will educate the younger runners in the program. Give the veterans enough informa-
tion so they can positively affect those young runners.

307
C h a p t e r 1 2
Never Think You Have Learned It All
Continue to read, attend clinics, and talk to successful coaches. Don’t be afraid to chal-
lenge your own beliefs about what works best for your athletes.
Liability and Safety
Distance running is one of the most difficult sports to properly supervise all of the
athletes all of the time. With the amount of miles that need to be run, it is almost a
necessity athletes leave campus, and with the varying degree or fitness and talent on a
high school team, it is almost impossible to keep all athletes together.
Therefore, it is mandatory that all coaches properly explain to all of their athletes
the safety precautions that need to be taken when they are working out off campus;
furthermore, coaches should repeat these warnings often and document when those
discussions were held and who was present.
Here are some precautions for athletes who train off campus:
• Do out and back runs—the entire team goes in one direction on a single road or
path and then returns in the same direction—athletes are much closer together
throughout the run and there is little chance of runners getting lost.
• There always should be at least two athletes running together. If a group has dwin-
dled down to two runners, those two MUST stay together – NO MATTER WHAT
– until they return to campus.
• Run on the left side of the road so you can observe and avoid oncoming traffic.
• Coach should always be in a car or at least on a bike monitoring all runners. Coach
should carry a cell phone in case of emergency.
• Stay alert! Athletes should never run wearing a headset. Athletes need to use their
eyes and ears to be aware of their surroundings.
• Athletes should not stare at strangers or react to verbal harassment. They should look
directly at strangers and be observant, but keep their distance and keep moving.
• Athletes should always obey all traffic laws and never jaywalk.
• Call the police immediately if something inordinately threatening happens to any runner.
• Instruct all runners, especially freshman, they are always to return to school—they
must not just go home if they feel tired or injured.
• If one athlete gets injured, his or her partner runner should never leave. The pair should
sit and wait on the course or road they were suppose to run for the workout until the
coach arrives. If they can walk, they should walk back along the workout path.

308
C h a p t e r 1 2
Preseason 1 Easy Pace Runs Steady Pace Runs
2 Steady Pace Runs Tempo Runs Easy Pace Runs
Early Season 3 Tempo Intervals Reps Steady Pace Runs
4 Reps Tempo Intervals Tempo Runs
Mid-Season 5 Reps Intervals Easy Pace Runs
6 Intervals Speed Reps Tempo Runs
2-4 wk phase primary emphasis secondary emphasis Maintenance
Race
Glendale
Relays
Surging
800m-1000-1200-
1000-800
Surge alt 200s
Surging
5 x 600 / 4 min int
Surge alt 200s
Target Race
Thornton
Invitational
Warm-Up
20 min Easy
Warm-Up Run
Easy Pace Run
30 min EPR at
Vetrans Park
Easy Pace Run
30 min EPR at
Water Tower Loop
Warm-Up
20 min Easy
Warm-Up Run
Race
Away Meet vs
Racine
Race
Home League
Dual Meet vs
Bloom
Target Race
Home League
Dual Meet vs
Proviso
Race
Away League
Dual Meet vs
Eisenhower
Easy Pace Run
30 min EPR at
Water Tower Loop
Easy Pace Run
30 min EPR at
Vetrans Park
Easy Pace Run
30 min EPR at
Vetrans Park
Easy Pace Run
30 min EPR on
campus loop
L-Reps
5 x 800 / 5 min int
at increased pace
Intervals
2x (200 - 30sec
200 -30sec -200)
Jog 800 btwn sets
Intervals
5x(300-60 sec
300) Jog 800 btwn
sets
Intervals
(2-4-6-5-3) x 150
w/ jog 50 recovery
jog 400 btwn set
Steady Pace Run
7m Steady Run at
Rollercoaster Loop
Steady Pace Run
60 min SPR on
Sullivan Loop
Steady Pace Run
60 min SPR
at River Loop
Steady Pace Run
60 min SPR on
Sullivan Loop
Easy Pace Run
30 min EPR
on your own
or Rest Day
Easy Pace Run
30 min EPR
on your own
or Rest Day
Easy Pace Run
30 min EPR
on your own
or Rest Day
Easy Pace Run
30 min EPR
on your own
or Rest Day
12
19
26
2
13
20
27
3
14
21
28
4
15
22
29
5
16
23
30
6
17
24
31
7
18
25
1
8
Sample 4-week DISTANCE Training Plan, MARCH 12–APRIL 8

309
C h a p t e r 1 2
800 METERS • 1600 METERS • 3200 METERS
Training Break:
(after Cross Country) November 12–December 17
Active rest and cross-training activities.
Training Re-Adaptation Period:
December 18–January 14 (4 weeks)
Resume daily training regimen with
long, easy runs.
Basic Preparation Period:
January 15–February 18 (5 weeks)
Increase training mileage, aerobic endurance, and muscular
strength. Add surging runs, tempo runs, hill loops, and reps
on grass. Begin weight training 2x week.
Transition to Track Training:
February 19–March 11 (3 weeks)
Increase quality and specificity of training with track workouts.
Add volume rep sessions on the track on Tuesdays and
Saturdays, long runs on Mondays, easy recovery runs on
Wednesdays, Fridays, and Sundays.
Specific Preparation Period:
Phase I March 12–April 8 (4 weeks)
Add speed intervals, surging and long reps at goal pace, and
neg-split reps on Tuesdays and open Saturdays. Continue long
runs on Mondays and easy recovery runs on Wednesdays,
Fridays, and Sundays.
Specific Preparation Period:
Phase II April 9– April 29 (3 weeks)
Train to race! Add reps faster than goal pace and neg-split
reps on Tuesdays, and open Saturdays.
Peak Racing Period:
April 30–June 2 (4 weeks)
Add 15-20 minute tempo runs on Mondays.
Speed reps on Tuesdays.
Easy recovery runs on Wednesdays, Thursdays, and Sundays.
S ample T R A I N I N G A N D C O M P E T I T I O N P L A N
P L A N N I N G A I D S F O R D E V E L O P I N G Y O U R T R A I N I N G S Y S T E M
Competition
Non-League Dual Meets on last 2
Thursdays
Competition
• 7 League Dual Meets begin on Thursdays
• 2 Invitational Meets on Saturdays
Target Races (2)
• Proviso Dual Meet
• Thornridge Invitational
Competition
Final 3 wks of Dual Meets and Invitationals
Target Races (3)
• Oak Park Dual Meet
• Arcadia Invitational
• Mt. Sac Relays
Target Races (3)
• May 4 League Finals
• May 11 CIF Prelims
• May 25 CIF Masters
• June 1–2 State Meet

310
C h a p t e r 1 2
warm-up:
Pre-stretch:
STRETCH:
Build-ups:
Workout:
Warm-down:
Power Plyometric Drills: q Hopping q Bounding
rhythmic Plyometric Drills: q Walking q Skipping q Running
LEG-UPS:
PUSH-UPS:
Notes:
D I S T A N C E R U N N E R S T R A I N I N G S C R I P T

311
C h a p t e r 1 2
warm-up:
Pre-stretch:
STRETCH:
Build-ups:
Workout:
Warm-down:
LEG-UPS:
PUSH-UPS:
Notes:
S A M P L E D I S T A N C E R U N N E R S T R A I N I N G S C R I P T
3
1
2
3
4
6
7
5
Mon April 9
6 x 100m
Russian Intervals (300m–jog 100m @:30–300m–jog 100m @ :30–300m)
GROUP 1: x 4@ 48w/jog 800m btw sets; Carlos, Chris C., Marc, Dave K., Vaughan
GROUP 2: x4@ :52 w/jog 800m btw sets; Bob, Pat, Eddie, Wilton, Chris E., Quoc
GROUP 3: x4@ :56 w/jog 800m btw sets; Mark, Robert, Troy, Michele, Chris M., Mary
GROUP 4: x3@ 64 w/walk 400–jog 400 btw sets; Louise L., Gretchen, Annie L., Lesley
+ 2800m surging last 100m of laps 1-3-5
800m / 1600m
2x (8 dbl leg, 4sngl leg)
25
7:00 a.m.morning run tomorrow for Groups 1-2-3.
Be here ON TIME!
1000m

312
C h a p t e r 1 2
warm-up:
Pre-stretch:
STRETCH:
Build-ups:
Workout:
Warm-down:
LEG-UPS:
PUSH-UPS:
Notes:
S A M P L E D I S T A N C E R U N N E R S T R A I N I N G S C R I P T
3
1
2
3
4
6
7
5
Mon April 9
6 x 100m
Surging: 200m surging alt 300s; 2x1400m surging alt 200s; 1000m surging at 100s
GROUP 1: @ 70-80 / 33-34 / 15-22; Mike T., Dave VH., Dave O
GROUP 2: @ 80-90 / 36-46 / 14-24; Tom, Mike S., Vlady (Grace: 1200-1x1400-1000)
GROUP 3: @ 90-1:45 // 1x1400 @ 42-52 / 1x600 @ 18-25; Margarita, Annie S.,
Meagen, Rose, Alison, Shelley, Janice
+ 2800m surging last 100m of laps 1-3-5
3
3200m
2x (8 dbl leg, 4sngl leg)
25
7:00 a.m.morning run tomorrow for Groups 1-2-3.
1000m

313
13
C h a p t e r
Training Long Jumpers
Success in the long jump depends a great deal on the speed of the
jumper because horizontal velocity (speed) is a primary requisite for
ultimate success in the event. Great long jumpers such as Carl Lewis,
Mike Powell and Marion Jones are also world class sprinters. Just
as important as horizontal velocity is vertical impulse and, finally,
technique also affects performance.

314
C h a p t e r 1 3
A Philosophy for Coaching Long Jumpers
High school coaches will find the abilities and physical maturity of young athletes will
vary greatly. Long jumpers may range from 14 to 24 foot performers. A coach needs
to construct a training program to encompass this spectrum of ability. Training that
emphasizes the fundamentals of speed, rhythm and power will benefit jumpers the
most. Emphasis on technical execution should increase the performance of all jumpers
as they acquire basic jumping skills.
A left-footed takeoff is assumed in all descriptions throughout this chapter on the
long jump.
The long jump can be broken down into four phases: 1) the run-up, 2) the takeoff,
3) the flight in the air and 4) the landing.
THE Run-up
The dual objective of the run-up is to generate maximum controllable speed at the
takeoff board and to be accurate. An accurate and consistent approach run is essential.
Habitual fouling or taking off well behind the takeoff board is the result of poor
preparation. Sound fundamentals, good sprint mechanics, rhythm and repetition will
produce consistent approach runs.
These are important concepts in producing an efficient and precise run-up…
1. Most run-up accuracy errors are caused in the first three to four steps.
2. The last five to six strides in a run-up, when the jumper is in “full flight”, should
be the most accurate in stride length.
3. The long jump is not a race! The object is to generate maximum speed at the
board. The run-up is a controlled acceleration from the start to the takeoff.
4. The length of the run-up is determined by the point at which each jumper can
reach maximum controllable velocity. Generally, the faster the runner, the longer
the run-up will be.
5. When stride frequency ratios are interrupted by adjusting the stride length in the last
five to six strides to “hit the board”, horizontal velocity is diminished. Just because
the jumper is “on the board” does not mean it is an accurate or good run-up. It is
more important to be on the coach’s mark five to six strides out from the board.
6. Every jumper has a “posting” leg or a takeoff leg and a “swing” leg or drive leg.

315
C h a p t e r 1 3
Right-handed athletes generally “post” with the left leg and “swing” the right leg.
It is important that long jumpers use the correct leg. A good test for this is to see
how a jumper kicks a football. The leg that the long jumper kicks a ball with is the
swing leg.
7. Horizontal velocity off the board normally takes priority over height in the long jump.
Establishing a good run-up can be done on the track so that the takeoff board and
sand pit do not psychologically affect the stride pattern.
BEATS
Long jump run-ups are measured in “beats..” A “beat” is nothing more than two steps
(e.g. each left foot plant). A ten beat run-up, therefore, is twenty strides to the board.
Novice jumpers should start at six beats (12 strides), intermediate jumpers eight or
nine and good jumpers will need 10 beats or more. The distance of the last four
strides, divided by two, allows the jumper to move his or her start marks forward or
back a “beat” to shorten or lengthen the run-up (about 13 feet) and still be accurate
to the board.
Start marks
A start mark is placed along the runway where the athlete first begins the run-up. A
secondary mark should be at a comfortable three or four steps into the run-up. This
secondary mark monitors the place where most run-up accuracy errors occur.
4-5 or 6 step marks
This marker is placed four to six steps out from the takeoff board and is not for
the jumper—it is for the coach—the athlete should never look for this mark on the
runway. In fact, many people refer to this mark as the “the coaches mark,” it is the
most important mark because being “on” allows the jumper to take even strides to the
board without making stride adjustments.
RHYTHM
Like music, the run-up must have a rhythmic quality in order to build up speed
and be accurate. Since the final four to six strides are relatively consistent, and the
coach can monitor the first three to four steps, the only problem is getting from the
start marks to the coach’s mark. This can be accomplished by adopting a three step
rhythm. The jumper needs to “hear” this galloping rhythm and be able to repeat it.

316
C h a p t e r 1 3
THE TAKEOFF
The long jump takeoff entails lowering the center of mass slightly on the penultimate
step (next to last step) and driving the left arm and free leg upward to apply extra force
to the board thus creating lift and some vertical velocity. This should have a “ba-boom”
sound to it.
Long jumpers should not look at the takeoff board during the run-up or at takeoff but
should keep the eyes focused on a spot behind and above the pit. The jumper should
also not throw the head back on takeoff. Applying too much upward movement
diminishes the horizontal velocity off the board.
In a run-up, as in sprinting, the ground contact for each step is about .07 to .08
seconds. During the takeoff, the center of mass keeps moving while the foot is in
contact (.11-.12 seconds) with the takeoff board. This creates a “hinge moment” (also
called checking linear motion) resulting in a forward somersaulting action.
Where the center of mass is in relationship to the foot when it breaks contact with the
board makes up part of the length of the jump. The center of mass should be well forward
of the foot. Some coaches believe it is not necessary to “coach” a lowering of the center of
mass on the penultimate step-they feel this will occur naturally. A shorter last stride does
help to get height in the jump, but it somewhat diminishes horizontal velocity.
THE FLIGHT
There are two basic techniques for flight in the air and each has the purpose of
counteracting the forward somersaulting action created in the takeoff, so the jumper
arrives in the sand in a good efficient landing position. Once the foot breaks contact
with the board, the center of mass travels on a perfect parabolic curve to the landing;
it can’t be changed in the air but body position around it can be adjusted.

317
C h a p t e r 1 3
THE HANG
In the “hang” style of jumping, the somersaulting action is slowed by extending the
arms and legs as far away from the center of mass as possible, thereby, slowing the
forward rotation. The jumper will be in an inverted “C” position. The arms then are
moved forward and down, lifting the legs in an action reaction movement. This style
of flight is probably best for novice jumpers because it is easier to teach and quite
effective; in fact, it is used by many world class jumpers.
THE HITCH KICK OR RUN IN THE AIR
In this movement in the air the arms are rotated in the direction of the forward
rotation which creates an opposite reaction to the trunk, moving the hips forward.
The left arm, driving up on takeoff, will reverse itself and rotate 540-degrees finishing
behind the body. The right arm will rotate 360-degrees and also will finish aligned
with the left arm behind the body. The legs continue the running motion in the air
and contribute to counteracting the forward rotation by moving forward from the hip
with a short radius and back with a long one.
THE LANDING
An efficient landing is critical to the length of the long jump. The object is to “break”
the sand as far forward as possible with the heels, using straight legs, then move the
rest of the body even or passed that mark.

318
C h a p t e r 1 3
There are three basic landing techniques: “buttocks in the hole,” “skid out” and “over
the top.”
BUTTOCKS IN THE HOLE
In this landing technique, the legs are extended at about, or slightly above, the path of
the center of mass. The feet blow a hole in the sand and continue forward, bending at
the knees while the buttocks are lifted by slightly arching the back, eventually dropping
into the hole. Where the buttocks land and where the feet break the sand should be
the same. The arms should be back on initial contact and then brought forward.
SKID OUT
In this landing, the left leg is extended out to the left and the body leans to the right.
The left leg blows a hole, the right leg collapses and the right hip lands even to the right
of the initial contact hole of the left leg. The arms are brought forward on contact.
OVER THE TOP
This landing is similar to the “buttocks in the hole.” Both legs collapse and the
buttocks are brought to the heels. The arms are then moved forward and the body
rotates forward.

319
C h a p t e r 1 3
Coaching Tips
1. Working on the track instead of the runway…
A) Establish a three- or four-step mark with tape and make sure this mark is “on.”
B) Do two sets of six run-throughs (with a break in between) and mark each coach’s
mark (4-6 strides out from the board) and takeoff mark with small pieces of tape.
As a “pattern” begins to emerge, remove the pieces of tape that are exceptionally
long or short (called erratics). Do this for several days until you have a good
“pattern.”
2. Measure these marks and then transfer them to the long jump runway and begin to
practice the run-up.
3. Emphasize a three-step rhythm during the run-up.
4. Establish a competition warm-up routine and continue to work to the coach’s mark.
5. Use a four-inch “lift box” to practice flights in the air and landing from short run-
ups.
6. During competition, coaches should adjust the start marks of their jumpers to
compensate for wind, different surfaces, nervousness or the athletes’ fitness to make
sure the jumpers land exactly on the coach’s mark.
Do not adjust marks back from the takeoff board. The final four to six strides must
be the most consistent and any change in stride length in an attempt to be “on” the
takeoff board will diminish horizontal velocity.
7. Athletes should never do pre-meet warm-ups from the takeoff board backwards up
the runway to check their approach. Runways are always placed to take advantage of
a tailwind, so “checking” a step into the wind will never be correct when the jumper
turns around and comes back down the runway with the tailwind.
Drills
Practicing the long jump is difficult to do in a sand pit that is not properly main-
tained and prepared daily for practice or meets. While jumping in practice or in com-
petition, make sure the sand in the pit has been dug up and turned over several times
and is watered down.

320
C h a p t e r 1 3
A good drill to practice without using a sand pit is to jump off a lift box with a short
run, practice the flight and land in a foam pit borrowed from the high jump or pole
vault events.
Another drill that can be used is the “standing long jump drill.” Stand tall in a sprint
position, drive the free leg up with the left arm, drop the free leg and elevate the arms,
arch back into a reverse “C”, pull down with arms and touch chest to thighs.
THE "LIFT" BOX
A four-inch lift box can be purchased commercially (they are called step aerobics
boxes) or they can be easily constructed using a 2’ X 2’ piece of 1/2 inch plywood and
a 2” X 4” stud. Cut the 2” X 4” into a frame and screw or nail it to the plywood. This
lift box can also be used in the triple jump, pole vault and high jump.
Training for the Long Jump
As with every other event, universal principles of training apply to the long jump.
PROGRESSIVE OVERLOAD
In order for the physical capacity of the athlete to increase, the athlete’s system must
be subjected to stress, or overload. The body’s adaptation to this stress results in
increased capacity. This cycle of stress and adaptation is the foundation of all training.
As discussed in a previous chapter, this is also known as the SAID principle, the
Specific Adaptation to Imposed Demands.
SPECIFICITY
The body adapts to specific demands placed upon it; therefore, training for the long
jump must specifically address the requirements, strengths, and skills needed to
perform these events.
REPETITION
This principle is an outgrowth of the specificity requirements. In a technical event
such as the long jump, the neuromuscular patterns of technique need to be enforced
through repetition of movement. This usually entails dissecting the jump into
components and performing them repeatedly with proper technique.

321
C h a p t e r 1 3
RECOVERY
In order for the body to adapt to progressive overload, it must rest and recover from
the applied stress. Long jumpers need ample recovery for their legs to be fresh. Since
much of the training they must do is quite demanding, long jumpers require plentiful
rest even though they may not feel tired or worn out. Long jumpers cannot jump
every day and expect to perform well in competition.
Explosiveness and Acceleration
Long jumps are explosions of the body off the ground. The body becomes a projectile
accelerated by its own power. The training of a long jumper needs to specifically
develop this explosiveness through weight training, plyometric training, and jumping.
Body Control (Kinesthetic Awareness)
To excel in the long jump, the athlete must develop the ability to control the position
and posture of his or her body while in motion, both on the ground and in the air.
The athlete needs to have a feel for the body and how it moves. This is the essence of
athletics. Drills and repetition refine this awareness.
Considerations in Training
Both the coach and the athlete must have an understanding of the physical and
technical skills needed to be a successful long jumper. This means understanding the
importance of sprint speed and mechanics, leg strength, jumping power, rhythm,
flexibility and proper jumping technique.
• Athletes should also have a basic understanding of the biomechanical principles
that govern their event. With effort by the coach, these can be taught easily. Most
important, jumpers need to understand the importance of the transfer of horizontal
velocity into the jump.
• Developing sprint speed and mechanics are the most important features of training
for the long jump. Long jumpers must train to be short sprinters.
• Successful long jumping requires good strength. The transition from approach
to takeoff in the long jump is one of the most physically difficult skills in track
and field. Preseason weight training and intelligent use of plyometric training
throughout the season will help provide athletes with the strength they need to
perform well and avoid injury.

322
C h a p t e r 1 3
• Good jumpers must also be flexible. The speed and power demands of the long
jump place athletes with poor flexibility at substantial risk of injury. Long jumpers
should include event specific stretching exercises into their daily workouts.
Since good long jumpers and triple jumpers are usually good sprinters, these
athletes often compete in multiple events. It is the responsibility of coaches to
adjust the training of jumpers to ensure they have adequate rest and recovery. Hard
jumping or sprinting cannot be done every day.
Types of Training for the Long Jump
The types of training done for the long jump can be divided into three
categories: general training, specific training and specialized training.
General training develops the overall physical capacity and fitness of the athlete.
This encompasses basic running, weight training, plyometric exercise and rhythm
development.
Specific training has a direct correlation to the skills necessary for long jumping.
Often it is a refinement of general training. Sprinting, sprint technique drills, jumping
technique drills and specific plyometric drills are included.
Specialized training duplicates the exact movements of long jumping. This normally
involves exercises that replicate a specific feature or phase of the jump. Full speed approach
runs, full jumps, transition drills with takeoff and multiple jumps are examples.
With high school athletes, the vast majority of training will be general in nature.
First, the strength and performance levels of these young long jumpers will benefit
much more from general training throughout most of the season. Coaches should
develop jumpers as athletes first, then as long jumpers. Second, with a large number
of athletes to guide, few coaches can spend the time necessary for intensive specialized
training. Third, most jumpers are multi-event athletes, and general training fulfills the
basic training demands of other events as well.
Specific and specialized training teach athletes to be good long jumpers. The propor-
tion of specific and specialized training to general training should increase over the
course of the season. Specialized training is the refinement of technique. At the high
school level, it should account for only a modest amount of the total training program.

323
C h a p t e r 1 3
Like any event in track and field, the long jump requires many types of training…
• Running training (including sprinting)
• Plyometric training (including rhythm jumping drills)
• Weight training
• Technique drills
• Long jumping
• Flexibility training
• Jump testing
Running Training
Running workouts for long jumpers develop overall fitness, endurance, rhythm,
sound running mechanics, and especially sprint speed. Emphasis should be placed
upon building speed and developing a strong acceleration pattern with relaxed
sprinting technique. Off-season long runs will strengthen the athlete and prevent
injury. In-season training should include sprint training twice per week. Of course,
the multi-event athlete also needs to train for his or her specific running event. This
usually satisfies the general fitness demands of long jumping.
Sample Running Workouts
• Off-season: Easy distance runs (2-3 miles)
• Preseason: Long sprint repetitions (400-600 meters)
• All season: Short sprint repetitions (50-300 meters)
• Late season: Fast sprint repetitions
• 30-60m from blocks or with a flying start
• 50-70m at run-up rhythm
• l0-15m with a flying start
Plyometric Training
Plyometric training specifically fulfills the needs of long jumpers by developing the
ballistic muscular strength these events demand. Care must be taken not to over train
and risk injury. Nonetheless, plyometrics are effective because they directly address
several principles of training for the long jump.

324
C h a p t e r 1 3
Sample Plyometric Workouts
• Rhythm plyometric drills (rhythm skipping and bounding)
• Easy multiple jumps (R-R-LL-R-R--LL-RR or L-R-L-R-L-R)
• Power skipping and bounding
• Hurdle hops
• Rhythm run-ups into a long jump
Weight Training
Weight training builds basic strength. The off-season is the time for long jumpers to
work in the weight room. After the competitive season begins, weight training should
become a maintenance activity.
Many long jumpers probably come to track and field directly from another seasonal
sport, so they may not have time to undertake a full strength training program.
Sample Weight Training Exercises…
• Half-squats (4 x 10 @ 60% SRM* or 5 x 3 @ 90% SRM)
• Leg extensions
• Hamstring curls
• Step-ups or lunges
• Snatches or cleans
(SRM = single rep maximum)
Sample Jump Technique Drills
• Rhythm plyometric jumping (skips, bounds, multiple jumps)
• Rhythm high knees
• Standing long jumps (stressing positions and extension)
• Approach runs with a simulated takeoff (pop-off)
• Pop-offs (ups) (stressing rhythm and mechanics of transition)
• Hanging drills (simulate run-up and jump while hanging from bar)

325
C h a p t e r 1 3
To train specifically, athletes must long jump in practice. Full approach jumps are
physically quite demanding and should not be overdone in training. Long jumping
sessions should address the aspects of technique, endurance and maximum effort.
Each session should emphasize a single aspect of the jump.
Important Note: Many coaches have their athletes long jump over hurdles as a means
of increasing the height of the jump. This can be a disastrous training exercise. It
develops improper biomechanics, leads to bad technical habits and increases the risk
of injury to the athlete. Few, if any athletes can execute a jump properly with enough
height to clear a hurdle. More likely, the jumper will learn to slow at the end of the
approach to gather for the takeoff, then pull the legs up into a poor jumping position
in order to clear the hurdle. Moreover, this drill uses the negative incentive of fear
(hitting the hurdle) as motivation.
Endurance Jumps
By performing 6-10 jumps using good technique and rhythm, endurance jumps
build specific jumping fitness and reinforce the need for consistency. Once again, the
objective is to stress execution, not distance.
Maximum Effort Jumps
These specialized jumps emphasize effort and performance. After a thorough warm-
up, the athlete should take three to six full approach jumps. More jumps may be
taken with a shorter approach. Maximum effort jumps should be done once every two
weeks early in the season and once a week with fewer jumps as the season progresses.
A high school jumper who is competing in a dual or invitational meet every two to
four days throughout the season may never need to do this type of training. Jumping
far is for meets; jumping correctly is for practice.
Jump Testing
Although the real test of an athlete’s progress in training is performance in
competition, coaches should test the physical skills of their athletes periodically.
This helps to identify individual strengths and weaknesses, while encouraging and
motivating athletes as well. Test three to four times during the school year if possible,
or perhaps twice during the season. Testing at the end of the season will provide both
the coach and the returning jumpers with training goals for the next year.

326
C h a p t e r 1 3
Sample long jump test (two attempts each test)
• 50m sprint for time
• SRM Half-squat
• Vertical jump
• Hamstring curls for maximum reps
• Standing long jump
• 30m flying sprint
• 10 Bounds for distance
• Multiple jumps (e.g. H-FI-S--FI--H-S)
A Reminder About Rest
Many coaches and athletes fail to understand that rest and recovery are essential
parts of the training process. “No pain, no gain” can only accomplish so much. Sore
and exhausted muscles cannot perform up to their capacity. Sometimes it may be
necessary to train through a meet; however, especially for jumpers, nothing improves
performance more than rest.
Training for the High School Season
Periodizing training is dividing the season into a cycle of several phases, each
emphasizing particular types of training and skill development during a specific
period of time. Other types of training are not neglected, but are less emphasized
during that period. The components that make up training for a skill event are
numerous and complex. As a rule, three to four weeks seems to be the maximum
period during which athletes can sustain improvement with any one type of training.
During a two to four week training phase, primary emphasis should be given to one
type of training, secondary emphasis should be given to another type of training, and
a somewhat less emphasis (maintenance training) to another. Within any training
phase it is not wise to include more than three quality days per week, including
competitions. The remaining days should be easy training and recovery days.
Training is stress. When constructing an athlete’s training regimen, coaches should
plan how they are going to introduce and manage that stress. Recovery is an essential
component of all types of training because all improvement occurs during recovery

327
C h a p t e r 1 3
while the body adapts to the stress. The long term consequences of the coach or
athlete not planning for recovery or an athlete not listening to his or her body are
illness, injury, overtraining, and burn-out.
Preseason 2 General training Rhythm plyos
3 Rhythm plyos Technique Easy runs
Early Season 3 Power plyos Sprint reps Technique
3 Tech jumps Specific plyos Sprint reps
Mid-Season 2 Tech drills/jumps Specific plyos EP runs
2 Intervals Tech drills Specific plyos
Late Season 2-4 Special training Technique Sprint reps
Tech jumps
weeks primary emphasis secondary emphasis Maintenance
Team Meeting
Warm-Up
Stretch
5 S-Approach LJs
Team Meeting
Warm-Up
Stretch
5 x LJ Approach
Team Meeting
Warm-Up
Stretch
5 x TJ Approach
LJ Tech Drills
TJ Tech Drills
4 x 120 Tempo
Away Meet
vs
Campbell HS
Home Meet
vs
Mathias HS
Home Meet
vs
C.J. Yang HS
Team Meeting
Warm-Up
Stretch
5 x LJ Approach
Sprint drills
TJ Tech Drills
Rhythm Jumps
Warm-Up
Stretch
4 x TJ Approach
Rhythm Plyos
Sprint Drills
3x150 Strides
Away Meet
vs
Toomey HS
Easy Run
or
Rest Day
Easy Run
or
Rest Day
Easy Run
or
Rest Day
Easy Run
or
Rest Day
TJ Technique
8xS-ApproachJumps
Hurdle Hops
1 x 400 Stride
LJ Technique
5x LJ Run-ups
10S-ApproachJumps
Power Skipping
Power Hops
LJ Tech Drills
TJ Tech Drills
Sprint Workout
100-50-100-200
4 min recovery
Easy R-Drills
Sprint Drills
45 x 80 Strides
5x80 Tempo BUs
Power Series:
Skipping / Hopping
Standing TJs
Multiple Jumps
120-140 Contact
Rhythm Plyos
Sprint Workout
2 x (100-150-200)
5x LJ Run-ups
5 S-Appro TJs
Power Series:
Skipping / Hopping
Standing TJs
Rhythm Drills
8 x 50m
Block Starts
Power Skipping
Hurdle Hops
3 x LL–RR–LL–RR
Block Starts
6 x 60
Power Plyos
6x30 Tempo BUs
Jenner Relays
Johnson
Invitational
Rest Day!
1
8
15
22
2
9
16
23
3
10
17
24
4
11
18
25
5
12
19
26
6
13
20
27
7
14
21
28
Sample 4-week Horizontal Jumps Training Plan, April 1–28

328
C h a p t e r 1 3
RUNNING warm-up:
Pre-stretch plus:
RHYTHM AND SPEED POLYOMETRIC DRILLS:

LONG/TRIPLE JUMP TECHNIQUE: Drills and Jumps

Power Plyometric Drills:
q Skipping q Hopping
q Bounding q Multiple Jumps
RUNNING AND APPROACH DRILLS:
WARM-DOWN:
WEIGHT TRAINING:
Notes:
L O N G / T R I P L E J U M P E R S ' W O R K O U T
Sequence Date:

329
C h a p t e r 1 3
RUNNING warm-up:
Pre-stretch plus:


WARM-DOWN:
WEIGHT TRAINING:
Notes:
S A M P L E L O N G / T R I P L E J U M P E R S ' W O R K O U T
Sequence Date:
1
2
3
4
Mon April 9
in training flats
jog 1600m
3
*3-5 approach *3-5 box takeoff and landings
*2x3-step pop-ups *2x 3-step jumps
5
6
7
in spikes on runway
2-step combos: 4-5x RRL/LLR on grass in training
flats (step comes at 35% HOP-30% step-35% Jump)
in spikes
2x300m @ 60%-3x200m @ 70%-4x100m @ 80%-2x50m @ 90%
jog 800m
Phase / Speed/Strength Series

330
Training Triple Jumpers
There certainly is a parallel between watching a flat stone skip across
the top of a calm lake and a triple jumper gliding across the run-
way after hitting the takeoff board. To successfully skip a stone over
water, the stone must hit the top of the lake at a flat angle and have
sufficient velocity to do multiple skips. The same type of technique
is necessary in the triple jump. Unlike the long jump, in which the
jumper is striving for vertical lift off the board, the triple jumper is
trying to “run off the board”, and it is imperative that no forward
rotation be generated at that time. The difference in the takeoff of
the long and triple jump makes coaching this event and doubling
these events difficult. Most world class triple jumpers do not long
jump! Maintaining horizontal velocity throughout the three phases
of the jump is the key to good triple jumping. Throughout the three
phases, the eye focus should be beyond the pit on a distant object
(never looking down). Good technique in the triple jump will result
in positive performances.
14
C h a p t e r

331
C h a p t e r 1 4
A Philosophy for Coaching the Triple Jump
The coach should realize the triple jump is an event that cannot be practiced in all
phases very often. High jumpers, pole vaulters, throwers and hurdlers may be able to
execute their events multiple times in practice; however, the triple jump is so stressful
on the body when performed at “full speed” that the event must be broken down into
practice segments and then put together in competition to avoid injury and fatigue.
Various drills make up most of the technique practice in the triple jump.
High school coaches will find the abilities and physical maturity of young athletes
varies greatly. Triple jumpers may range from 24- to 50-foot performers. A coach needs
to construct a training program to encompass this spectrum of ability. Training that
emphasizes the fundamentals of speed, rhythm, and power will benefit jumpers most.
Emphasis on technical execution should increase as athletes acquire basic triple jump-
ing skills.
Finally, an accurate and consistent approach run is essential in the triple jump. Habitual
fouling or being well behind the board at takeoff is the result of poor preparation.
Sound fundamentals, rhythm, and repetition will produce consistent approach runs.
Fouling is simply a waste of good effort.
The Run-Up
The run-up in the triple jump is basically the same as the long jump (see the previous
chapter on establishing and coaching the run-up). Although horizontal velocity is very
important in the triple jump, the run-up in the triple jump has to be more controlled
than that in the long jump.
Phase 1 The Hop
The takeoff is the most critical component of a good triple jump. The jumper cannot
elevate off the board as is done in the long jump. A single arm (running type) takeoff is
recommended.
A double arm takeoff where the right arm is held back on the penultimate stride and
then both arms come together on takeoff diminishes horizontal velocity because the
center of mass is behind the foot creating forward rotation, most likely resulting in a
hop that is too high.

332
C h a p t e r 1 4
The “lift” off the board is very mild in the triple jump and there is very little drop of
the center of mass in the penultimate stride.
There are other types of takeoffs that allow the jumper to land during the hop with
both arms back.
In the “arm and a half” technique, the left arm drives forward and the right arm is
moving backward but “bounces” off the stomach and is thrust forward. Both arms
come back together during the hop flight.
Another method, used by world record holder, Jonathan Edwards, is called the “loop.”
In this technique, the right arm, moving backwards at takeoff, continues to rotate
around the shoulder in a 360-degree circle, meeting the left arm and landing both
arms back.
As the athlete leaves the board, the takeoff leg is extended for a complete push off the
ground. The drive leg thigh should be below parallel to the ground at takeoff with the
knee joint at 45-degrees.
The drive leg will then begin to rotate from in front of the center of mass to behind
it, while the takeoff leg begins to pull forward. As the takeoff leg reaches parallel, the
lower portion of that leg extends past the knee, with the foot dorsiflexed. Once the leg
is extended, the athlete then forcefully drives the entire leg downward, striking the
ground and setting up an active flat-footed landing.
A unique feature of the triple jump is the action of the landing foot at the end of each
phase. A pawing motion of the foot creates a backward velocity of the landing leg,
helping to maintain forward velocity of the body.
The hop phase of the triple jump begins with a run off the board, run in the air and
land on the same foot as the takeoff. Throughout this phase the upper body must
remain in a vertical position (no leaning forward or back). The jumper must land with
the center of mass over the foot and the free leg and arm or arms behind the body, so
they can swing forward and lift the jumper into the second phase.
“Reaching” for the landing with the center of mass behind the foot “checks” horizontal
velocity into the second phase and causes forward rotation. Excessive height on the

333
C h a p t e r 1 4
hop will hinder the jump because the increased absorption time upon landing reduces
horizontal speed and will lessen the distance of the step. The hop phase should never
make up more that 35 percent of the total jump distance.
There is a saying that “the triple jump starts at the end of the hop.”
Phase 2 The Step
The second phase of the triple jump begins as the takeoff foot returns to the ground.
The takeoff leg is fully extended with the drive leg parallel to the ground and the knee
at 90-degrees.
As the athlete leaves the ground, the takeoff leg stays behind the center of mass and the
drive leg “holds” parallel to the ground, 90-degrees at the knee position. As the athlete
begins the descent, the drive leg drops downward for a quick transition to the jump
phase. Once again the center of mass should be over the foot (not behind or in front).
The step phase should make up 30 percent of the total jump distance.

334
C h a p t e r 1 4
Phase 3 The Jump
The third and final phase of the triple jump is basically a long jump preceded by a
jump rather than a run. The takeoff leg (the drive leg in previous phases) is extended
forcefully upon contact with the ground. A “hang” style is used (see the long jump
chapter) in which the arms are driven up and the drive leg is dropped and the body
assumes an inverted “C" position. The arms are brought forward and the legs are
straightened. The best landing would be a “buttocks in the hole” as detailed in the
long jump chapter. The jump should make up 35 percent of the total jump length.
Ratios
Ratios of the hop, step and jump are very important. As previously mentioned, the
hop should make up no more than 35 percent of the total jump. Long hops create
short steps and jumps with diminished horizontal velocity. Triple jumping involves
getting three long jumps, not one long and one or two short ones. The key is getting a
"step” that is 30 percent of the jump.
If a jumper is capable of triple jumping 40-feet, as an example, the jump would consist
of a 14-foot hop, a 12-foot step and a 14-foot jump which equals 40 feet! The train-
ing of this athlete would be to execute these distances in drills and practice. When the
jumper is jumping 40 feet, you then move to a 41- or 42-foot ratio! It is a good idea to
place markers at each of these distances and film them in competition.
Use the following chart to work with your triple jumpers.

335
C h a p t e r 1 4
THE WORLDS LONGEST TRIPLE JUMP
Jonathon Edwards of Great Britain holds the world record in the triple jump at 60’.
Edwards started jumping as a 14-year-old, and 20 years later he set the world record.
He also had a 60' 5” wind aided jump that was very close to the perfect 35-30-35 ratio.
Teaching the Triple Jump to Beginners
For athletes who are being introduced to the triple jump it is best to start out with the
basic movements of the hop, then step, then jump from a standing start. Most triple
jumpers use their “posting” leg for the hop since they are taking off and landing on
it. For people who are right handed this is normally the left leg. The jumper should
concentrate on an even rhythm for each flat-footed landing.
Next, the jump should be broken down into its component phases. This would start
with the hop by doing a walking one-legged hop several times. Then, the circling
action of the hop leg should be incorporated. Then, multiple one-legged hops with a
circling leg, flat landing and upright posture should be attempted.
After learning the hop, the beginning jumper should move on to the step and jump
phases. Consecutive bounds duplicating the step and jump actions should be done.
The distance of each bound should be approximately equal to one another. Cones
placed equally apart will help to monitor this.
RATIOS HOP STEP JUMP
30' 10-6 9-0 10-6
31' 10-9 0-4 10-9
32' 11-2 9-8 11-2
33' 11-7 9-10 11-7
34' 11-10 10-3 11-10
35' 12-3 10-6 12-3
36' 12-8 10-8 12-8
37' 13-0 11-0 13-0
38' 13-4 11-4 13-4
39' 13-8 11-8 13-8
40' 14-0 12-0 14-0
41' 14-4 12-4 14-4
42' 14-8 12-8 14-8
T R I P L E J U M P R A T I O S

336
C h a p t e r 1 4
Next, the jumpers should combine the three phases of the triple jump. They should
start with the hop and step combinations on grass. Coaches should stress carrying the
momentum from the hop into the step. Finally, the jump phase is added to the end.
Once the phases have been put together, coaches should slowly add steps to the run-up
in accordance with the athletes’ ability to control their speed properly.
THE FOOTSRIKE TROUGH THE THREE PHASES
The transitions from hop to step and step to jump are of the utmost importance in
maintaining the greatest velocity during each phase of the triple jump. This active
landing, referred to as pawing, is similar to the foot strike of a tiger, reaching out, grab-
bing the ground, and pulling it towards the body.
In an active landing, the athlete’s leg is extended, the ankle flexed and the entire lever
(leg and foot) pulled down, forcefully striking the ground mid-foot. Upon contact
with the ground, the body rolls forward over the foot onto the toes while pushing off
the ground. If the athlete lands stiffly on the heel, a braking action will occur, decreas-
ing velocity and distance and increasing the chance of injury.
Considerations in Training
Both the coach and the athlete must have an understanding of the physical and
technical skills needed to be a successful triple jumper. This means understanding
the importance of sprint speed and mechanics, leg strength, jumping power, rhythm,
flexibility and proper jumping technique.
• Athletes should also have a basic understanding of the biomechanical principles
that govern their event. With effort by the coach, these can be easily taught.
Most importantly, jumpers need to understand the importance of the transfer of
horizontal velocity into the jump.
• Developing sprint speed and mechanics is the most important feature of training for
the triple jump. Triple jumpers must train to be short sprinters.
• Successful triple jumpers require good strength. The triple jump requires substantial
strength. Preseason weight training and intelligent use of plyometric training
throughout the season will help provide athletes with the strength they need to
perform well and avoid injury.
Good jumpers must also be flexible. The speed and power demands of the triple
jump place athletes with poor flexibility at substantial risk of injury. Triple jumpers

337
C h a p t e r 1 4
should include event specific stretching exercises into their daily workouts.
Flexibility is especially crucial to success in the triple jump.
• All jumpers need to develop sound rhythm and jumping coordination. Building
good rhythm skills along with speed is the key to producing solid triple jumpers.
Rhythm drills should be an integral component of any training.
• Since triple jumpers are usually good sprinters, these athletes often compete in
multiple events. It is the responsibility of coaches to adjust the training of jumpers
to ensure they have adequate rest and recovery. Hard jumping or sprinting cannot
be done every day. If a team has a separate jump coach and sprint coach, these two
coaches must work closely together to plan a jumper’s training.
Developing Jumping Rhythm
Rhythm is essential to successful jumping. It provides a structure for the expression of
speed and power throughout the run-up and jump. Rhythm establishes the timing and
cadence of explosiveness in jumping. The learning of rhythmic skills is fundamental
for all young jumpers. For young athletes, rhythm skills can compensate for the lack of
power in executing a triple jump. The development of jumping rhythm is enhanced by
various types of training, most specifically plyometric drills and approach run repeti-
tions. With the triple jump, the fluid transition from phase to phase with an even
cadence must be stressed.
Types of Training for the Triple Jump
The types of training done for the triple jump can be divided into three categories:
general training, specific training, and specialized training.
General training develops the overall physical capacity and fitness of the athlete. This en-
compasses basic running, weight training, plyometric exercise and rhythm development.
Specific training has a direct correlation to the skills necessary for triple jumping.
Often, this encompasses a refinement of general training. Sprinting, sprint technique
drills, jumping technique drills and specific plyometric drills are included.
Specialized training duplicates the exact movements of triple jumping. This routinely
involves exercises that replicate a specific feature or phase of the jump. Full-speed ap-
proach runs, full jumps, transition drills with takeoff and multiple jumps are examples.

338
C h a p t e r 1 4
With high school athletes, the vast majority of training will be general in nature. First,
the strength and performance levels of these young jumpers will benefit much more
from general training throughout the majority of the season. Coaches should develop
their jumpers as athletes first, then as triple jumpers. Second, with a large number of
athletes to guide, few coaches can spend the time necessary for intensive specialized
training. Third, most jumpers are multi-event athletes. General training fulfills the
basic training demands of other events as well.
Specific and specialized training teaches athletes to be triple jumpers. The proportion
of specific and specialized training to general training should increase over the course
of the season. Specialized training is the refinement of technique. At the high school
level, it should account for only a modest amount of the total training program.
As with any event in track and field, the triple jump requires many types of training:
• Running training (including sprinting)
• Plyometric training (including rhythm jumping drills)
• Weight training
• Triple jumping
• Flexibility training
• Jump testing
Running Training
Running workouts for triple jumpers develop overall fitness, endurance, rhythm,
sound running mechanics and especially sprint speed. Emphasis should be placed
upon building speed and developing a strong acceleration pattern with relaxed
sprinting technique. Off-season long runs strengthen the athlete and prevent injury.
In-season training should include sprint training twice per week. Of course, the multi-
event athlete also needs to train for his or her specific running event. This usually
satisfies the general fitness demands of triple jumping.

339
C h a p t e r 1 4
• Off-season: easy distance runs (2-3 miles)
• Preseason: long sprint repetitions (400-600 meters)
• All season: short sprint repetitions (50-300 meters)
• Late season: fast sprint repetitions
30-60M from blocks or with a flying start
50-70M at run-up rhythm
10-15M with a flying start
Plyometric Training
Plyometric training specifically fulfills the needs of triple jumpers by developing
the ballistic muscular strength these events demand. Care must be taken not to over
train and risk injury. Nonetheless, plyometrics are effective because they directly ad-
dress several principles of training for the triple jump and duplicate many of the event’s
movements.
• Rhythm plyometric drills (rhythm skipping and bounding)
• Easy multiple jumps (R-R-L--R-R-L-R or L-R-L-R-L)
• Hurdle hops
• Rhythm run-ups into triple jump
Weight Training
Weight training builds basic strength. The off-season is the time for jumpers to work
in the weight room. After the competitive season begins, weight training should
become a maintenance activity. Many triple jumpers probably come to track and field
directly from another seasonal sport, so they may not have time to undertake a full
strength training program.

340
C h a p t e r 1 4
Sample Weight Training Exercises
• Half squats (4 x 10 @ 60% SRM* or 5 x 3 @ 90% SRM)
• Leg extensions
• Hamstring curls
• Step ups or lunges
(*SRM=single rep maximum)
Technique Drills
As previously stated, triple jump drills make up the greatest amount of triple jump
technique work. Several of these drills can make up a workout session.
• Standing five step (alternating bounds)
• Running five step
• Standing triple jump
• 2-4-6-8- Stride triple jump
• Hop-ratio drill (working on getting the right hop distance)
• Step-jump ratio drill (working on getting the right step and jump distance)
• Hop-step ratio (doing just the first two phases without a jump)
• Box hop drill... This drill uses the 4” box half way between the takeoff and landing.
The jumper takes off with the left, steps on the box with the right, and then lands
on the left. It teaches the jumper to run off the takeoff, have low trajectory and
carry good speed into the step.
• Takeoff drills
BOUNDING
Beginning jumpers need to learn how to bound. Bounding involves high knees and vig-
orous arm action. It is best to start bounding between cones about five to six feet apart.
These bounding drills are done with a ten yard run-up on the grass. The total distance
of the bounds can vary from 10 to 50 yards depending on the fitness of the athletes.
When the knees stop coming up with the thighs parallel to the ground it’s time to stop!

341
C h a p t e r 1 4
• Alternating bounds - power bounding
• LL-RR-LL-RR-LL-RR-LL-RR
• LL-R-LL-R-LL-R-LL-R-LL-R
• Skip drills (this a good warm-up)
Jump Testing
Although the real test of an athlete's progress in training is performance in competi-
tion, coaches should test the physical skills of their athletes periodically. This helps to
identify individual strengths and weaknesses while encouraging and motivating ath-
letes as well. Athletes should be tested three to four times during the school year if pos-
sible or perhaps twice during the season. Testing at the end of the season will provide
both coaches and returning jumpers with training goals for the following year.
Sample Triple Jump Test (Two Attempts Each Test)
• 50m sprint for time
• SRM half-squat
• Vertical jump
• Hamstring curls for maximum reps
• 30m flying sprint
• 10 bounds for distance
• Multiple jump (e.g. H-H-S-H---H-S)
A Reminder About Rest
Many coaches and athletes fail to understand that rest and recovery are essential
components of the training process. “No pain, no gain” can only accomplish so much.
Sore and exhausted muscles cannot perform to their capacity. Sometimes, it may be
necessary to train through a meet, but especially for jumpers, nothing improves perfor-
mance more than rest.

342
C h a p t e r 1 4
Training for the High School Season
Periodizing training is dividing the season into a cycle of several phases, each emphasiz-
ing particular types of training and skill development during a specific period of time.
Other types of training are not neglected, but are less emphasized during that period.
The components that make up training for a skill event are numerous and complex.
As a rule, three to four weeks seems to be the maximum period during which athletes
can sustain improvement with any one type of training. During a two- to four-week
training phase, primary emphasis should be given to one type of training, secondary
emphasis should be given to another type of training, and somewhat less emphasis
(maintenance training) to another. Within any training phase it is not wise to include
more than three quality days per week, including competitions. The remaining days
should be easy training and recovery days.
Training is stress. When constructing a training regimen, coaches should plan how
they are going to introduce and manage that stress. Recovery is an essential component
of all types of training because all improvement occurs during recovery while the body
adapts to the stress. The long term consequences of the coach or athlete not planning
for recovery or an athlete not listening to his or her body, are illness, injury, overtrain-
ing and burn-out.

343
C h a p t e r 1 4
Preseason 2 General training Rhythm plyos
3 Rhythm plyos Technique Easy runs
Early Season 3 Power plyos Sprint reps Technique
3 Tech jumps Specific plyos Sprint reps
Mid-Season 2 Tech drills/jumps Specific plyos EP runs
2 Intervals Tech drills Specific plyos
Late Season 2-4 Special training Technique Sprint reps
Tech jumps
Team Meeting
Warm-Up
Stretch
5 S-Approach LJs
Team Meeting
Warm-Up
Stretch
5 x LJ Approach
Team Meeting
Warm-Up
Stretch
5 x TJ Approach
LJ Tech Drills
TJ Tech Drills
4 x 120 Tempo
Away Meet
vs
Campbell HS
Home Meet
vs
Mathias HS
Home Meet
vs
C.J. Yang HS
Team Meeting
Warm-Up
Stretch
5 x LJ Approach
Sprint drills
TJ Tech Drills
Rhythm Jumps
Warm-Up
Stretch
4 x TJ Approach
Rhythm Plyos
Sprint Drills
3x150 Strides
Away Meet
vs
Toomey HS
Easy Run
or
Rest Day
Easy Run
or
Rest Day
Easy Run
or
Rest Day
Easy Run
or
Rest Day
TJ Technique
8xS-ApproachJumps
Hurdle Hops
1 x 400 Stride
LJ Technique
5x LJ Run-ups
10S-ApproachJumps
Power Skipping
Power Hops
LJ Tech Drills
TJ Tech Drills
Sprint Workout
100-50-100-200
4 min recovery
Easy R-Drills
Sprint Drills
45 x 80 Strides
5x80 Tempo BUs
Power Series:
Skipping / Hopping
Standing TJs
Multiple Jumps
120-140 Contact
Rhythm Plyos
Sprint Workout
2 x (100-150-200)
5x LJ Run-ups
5 S-Appro TJs
Power Series:
Skipping / Hopping
Standing TJs
Rhythm Drills
8 x 50m
Block Starts
Power Skipping
Hurdle Hops
3 x LL–RR–LL–RR
Block Starts
6 x 60
Power Plyos
6x30 Tempo BUs
Jenner Relays
Johnson
Invitational
Rest Day!
1
8
15
22
2
9
16
23
3
10
17
24
4
11
18
25
5
12
19
26
6
13
20
27
7
14
21
28
Sample 4-week Horizontal Jumps Training Plan, April 1–28

344
C h a p t e r 1 4
RUNNING warm-up:
Pre-stretch plus:


WARM-DOWN:
WEIGHT TRAINING:
Notes:
L O N G / T R I P L E J U M P E R S ' W O R K O U T
Sequence Date:

345
C h a p t e r 1 4
RUNNING warm-up:
Pre-stretch plus:


WARM-DOWN:
WEIGHT TRAINING:
Notes:
S A M P L E L O N G / T R I P L E J U M P E R S ' W O R K O U T
Sequence Date:
1
2
3
4
Mon April 9
in training flats
jog 1600m
3
*3-5 approach *3-5 box takeoff and landings
*2x3-step pop-ups *2x 3-step jumps
5
6
7
in spikes on runway
2-step combos: 4-5x RRL/LLR on grass in training
flats (step comes at 35% HOP-30% step-35% Jump)
in spikes
2x300m @ 60%-3x200m @ 70%-4x100m @ 80%-2x50m @ 90%
jog 800m
Phase / Speed/Strength Series

346
Training High Jumpers
High Jump is an event of rhythmic explosion. Strength and spring are
certainly important, but those characteristics alone do not necessarily
make great high jumpers. In fact, many great high jumpers are not
great leapers, and few sprinters develop into exceptional high jumpers.
The high jump is the elegant transfer of strength and horizontal speed
into vertical lift and clearance of the crossbar.
15
C h a p t e r

347
C h a p t e r 1 5
A Philosophy for Coaching the High Jump
Coaching the high jump, like coaching most events in track and field, is both an art
and a science. Designing a training program for a group of athletes that can have a
wide spectrum of abilities ranging from girls that start at three feet who eventually can
reach as high as six feet and boys who start at four feet and eventually can jump seven
feet creates a difficult problem for the high jump coach.
There are several ways to look at the high jump event. In the simplest of terms, it
can be described as a somersaulting, twisting, back flip over a cross bar. Or, in order
to jump really high, the jumper must convert horizontal velocity (run-up speed) into
vertical velocity (speed off the ground) efficiently. The faster the vertical velocity off
the ground is, the higher the jumper will raise his or her center of mass. Another
way of looking at the high jump is it’s a fight against gravity. An object shot from the
ground will reach a high point then stall and return to the ground. The high jumper
leaves the ground. Therefore, he or she will reach a high point in the trajectory (called
an apogee). Hopefully this is where the jumper will clear the bar, and then the jumper
will return to the ground (the high jump pit). For a coach to effectively coach the
high jump, it is necessary to understand the mechanics of the jump the principals of
training, and to have the “tools” to teach the event.
The method of high jumping discussed in this manual is known as the Fosbury Flop
(named after its originator, the 1968 Olympic champion, Dick Fosbury).
The Flop has become the universal method of high jumping. It is relatively easy to
learn, has distinct biomechanical advantages and accounts for almost all of the top
performances in the event for the past 40 years. For these reasons, it is the only meth-
od of high jumping detailed in this manual.
All descriptions in this chapter assume a left-footed takeoff or jump.
Event Techniques and Skills to Be Taught
When designing a training program for the high jump the coach should keep these
techniques and skills in mind:

348
C h a p t e r 1 5
Speed development
Strength development
Rhythm
Explosiveness
Acceleration
Balance (body control)
Approach run
Running on the curve
Transition
Takeoff
Bar clearance
Use of arms
Flexibility
Event knowledge and rules
The Mechanics of the High Jump
The Flop method of high jumping consists of three basic parts: the run-up, the takeoff
and the bar clearance.
The Run-Up
Establishing an accurate and consistent approach to the bar is the most important
technical aspect of a good high jump. This is achieved by running a “J” shaped
approach to the bar. The run-up has to generate speed to the bar that is not too fast
or too slow, but is coordinated with the quickness of the force being applied to the
ground to produce the highest jump possible and still be able to clear the bar.
The number of strides to the bar will vary from eight strides for a beginning jumper
to as many as twelve for elite jumpers. Ten steps for good jumpers is somewhat stan-
dard. The curved run to the bar is one of the most important aspects of the Flop
technique. It allows the jumper to jump through the vertical axis of the body, but still
generate sufficient angular (rotary) momentum to back flip over the bar. The jumper
must stay on the curve all the way to the plant so he or she arrives at the takeoff lean-
ing away from the bar from left to right and back to front.
For accuracy to the takeoff point, several techniques are involved. First, four check

349
C h a p t e r 1 5
marks are used: start mark, a three or four step mark (to monitor the start), a straight
line mark and the takeoff mark.
The second technique is the eye “flick,” in which the jumper focuses the eyes through-
out the approach and jump. A jumper should watch the foot hit the three or four step
mark. The eye focus should then shift to the straight line mark on steps four and five,
and then swing to the standard on the sixth through eighth steps. On the last two steps
(penultimate and last step) the eyes do not focus at all. The jumper does not look at
the bar at any time during the run-up. Looking at the bar tends to pull the jumper off
the curve and causes him or her to jump toward the bar instead of straight up.
Finally, just like hearing the rhythm of a piece of music, a jumper listens to the
rhythm in the run-up to control the approach speed. A 1-2-3 rhythm can help to
increase or decrease the speed of the run-up.
The approach run should have a gradually quickening rhythm. The cadence starts
with a moderate tempo and builds to a very fast last step. The speed to the bar should
be consistent throughout a competition and should not change as the bar gets higher!
The last four strides must be completed with good tall running posture and inward
lean to counter the centrifugal force of running the curve. To reap the benefits of the
“J” approach, the athlete must keep each footfall on the curve. This is called “holding
the curve.”
Start of run-up
START MARKER
3 STEP MARKER
Start of the curve
Takeoff point
Center of the curve
Radius of the curve
STRAIGHT LINE
MARKER

350
C h a p t e r 1 5
The distance the jumper begins “out” from the right standard to the straight line
marker is determined by the speed of the approach. Beginning and novice jumpers
may only be out eight feet. Elite jumpers may be “out” 14 to 15 feet. The “hook” or
tightness of the “J” approach must be adjusted to produce a good lean away for the
takeoff. Also, the last two strides should be on a line of 35-degrees to the bar.
The Transition and Takeoff
The lean away from the bar from left to right counteracting the centrifugal force of
the curved run should be about 70-degrees at the plant touchdown (LRTD) and at the
takeoff (LRTO) close to 90-degrees. From back to front the jumper is leaning back at
touchdown about 70-degrees (BFTD) and taking off through the vertical axis of the
body on takeoff (BFTO). These two “lean aways” create a somersaulting action, and
when combined with an upper body ‘twist,” creates a back flip over the bar.
During the penultimate (next to last) step the jumper should pass over a deeply flexed
right leg, maintaining speed and keeping the center of mass low into the takeoff
plant. This is a difficult maneuver for a beginning jumper.
In a double-arm takeoff, the right arm is held back on the penultimate step and then
moved upward with the left arm on takeoff, stopping when the upper arms are paral-
lel to the ground. The left arm continues a running action all the way to the takeoff.
The swing leg applies force to the ground by moving upward to a 90-degree position
and blocks (stops) very quickly. The knee stays at the 90-degree position, but swings
under the body from the hips. The foot should be under the knee. The “twist” of
the upper body, which turns the back to the bar, occurs very quickly after the foot is
planted for takeoff but before losing contact with the ground. The head must turn
away from the bar with the shoulders and is not dropped back until the jumper leaves
the ground.
Bar Clearance
An efficient bar clearance is important to the execution of a good high jump.
The arch over the bar is created by throwing the head back, elevating the
hips and keeping the center of mass as low as possible. The arms should be
kept along the body or the inside arm can be dropped over the bar. Lead-
ing with an arm or straightening the legs after takeoff moves the body parts
away from the center of mass and stops or slows the rotation over the bar.

351
C h a p t e r 1 5
During bar clearance, the hips need to be higher than the shoulders and the
knees. The angular (rotary) momentum for the “flip” over the bar is cre-
ated on the ground from the “hinge” momentum (leaning away from the bar
at the plant). If there is not enough momentum to rotate over the bar, the
jumper will “stall” and/or pull the bar off with the calves. The problem of a
jumper “stalling” in the air is caused by the jumper’s shoulders being out of
position at takeoff. The jumper must “square” the hips with the bar so just
the right amount of “twist” is applied.
After the hips clear the bar, the head is brought forward, the hips are dropped and the
legs will be elevated over the bar.
Principles of Training for the High Jump
As with any other event, the universal principles of training apply to the high jump.
Progressive Overload
For the athlete’s physical capacity for exercise to increase, the body must be subjected
to increased stress, or overload. The body, in response, adapts to this stress resulting in
increased capacity. This cycle of stress and adaptation is the foundation of all train-
ing. As discussed in a previous chapter, this is also known as the SAID principle, the
Specific Adaptation to Imposed Demands.
Specificity
The body adapts to specific demands placed upon it; therefore, training for the high
jump needs to specifically address the requirements, strengths and skills needed for
the event.
Repetition
This principle is an outgrowth of the specificity requirements. Especially with a tech-
nical event like the high jump, the neuromuscular patterns of technique need to be
enforced through repetition of movement. This usually entails dissecting the jump
into its simplest components and performing them repeatedly with proper technique.
Recovery
For the body to adapt to progressive overload, it must rest and recover from the
applied stress. High jumpers need a good amount of recovery for their legs to be
“fresh.” Since much of the training they must do is quite demanding, high jumpers

352
C h a p t e r 1 5
require plentiful rest even though they may not feel tired or worn out. High jumpers
cannot jump every day and expect to perform well in competition.
Individuality
Respecting the principle of individuality is an important concept for the coach of
high school athletes. It is not uncommon to have jumpers performing at heights rang-
ing from four to almost seven feet. Age and strength differences have profound effects
on adolescents. You cannot develop freshman jumpers by having them adopt the
training of your best upperclassmen.
Aside from the general principles of training, there are several principles which apply
specifically to the high jump.
Accuracy and Consistency
The single most important factor in high jump performance is the execution of an
accurate, controlled approach run. The event also requires a consistent and identical
run-up in repeated jumping attempts. Accuracy and consistency are the foundation
upon which high jumping skills and technique are constructed.
Rhythm
High jumping, as with most track and field events, is an expression of power through
rhythm. Rhythm provides a reference for the control of speed and power. Rhythm
allows the athlete to relax while exerting tremendous effort and provides a cadence for
that effort.
Explosiveness and Acceleration
Within its graceful rhythm, the high jump is an explosion of the body off the ground.
The body becomes a projectile accelerated by its own power. The training of jumpers
needs to develop this explosiveness specifically, through weight training, plyometric
training and jumping.
To excel at high jumping, an athlete must develop the ability to control the body
position and posture while in motion on the ground and in the air. The athlete needs
to have a feel for his or her body and how it moves. Drills and repetition refine this
awareness.

353
C h a p t e r 1 5
Teaching the Flop Method of High Jumping
As a coach, maximize your instruction by emphasizing the development of an accu-
rate and consistent approach run and an effective transition to an explosive jump. The
proper execution of the run-up is crucial to successful jumping. This is not always
evident because many superior high school athletes jump well despite a poor approach
run. The fact is most high jumpers perform below their ability. The basic high jump
is relatively simple to do. Excelling at the event, however, involves the development
of technique. To understand the high jump, you, the coach, must focus on the entire
sequence of approach, takeoff, and clearance as one action, and not merely on the act
of jumping up to the bar.
Introducing the High Jump To Beginners
The high jump is usually taught in terms of the three phases: the approach, the transi-
tion and takeoff, and the clearance.
It is helpful, however, to introduce the event to beginners by starting at the landing
pit and working out toward the beginning of the run-up. Once the athlete has gained
some basic familiarity with the event, the development of technique proceeds back-
ward from the run-up into the pit. This progression should be done for two reasons.
First, young athletes love to jump into a foam pit. Many of us can probably recall
the lure of the jumping pits when we were in high school, and those first jumps will
provide the motivation to continue with the event. Second, the approach run changes
significantly as the athlete learns the event. As technique improves, the approach run
lengthens and more speed is carried into the takeoff.
You will find it is helpful to introduce the high jump to beginners with these simple drills
done in the following progressive order:
• Have your young high jumpers experience landing on their backs by doing simple
two legged backward jumps into the pit. Stress jumping up and landing on the
upper part of the back, not on the buttocks or neck.
• Determine the athlete’s takeoff foot (right or left) by having the jumper take a short
running jump upward off one foot as if to do a basketball lay up. That foot is nor-
mally the jump foot.
• From three strides out, have the athlete take a running jump and then turn and sit on
to the landing pit. Again, emphasize jumping up rather than diving back into the pit.

354
C h a p t e r 1 5
• Next, to develop the sense of jumping from a run-up, have the athlete begin taking
scissors jumps from one foot with a three- to five-stride approach over a low bar.
This introduces the demand for coordinating the run-up and takeoff. Do this drill
at slow speeds. This is not a hurdling drill.
• This step introduces the Flop in its basic form. The athlete should perform jumps
from a three- to-five stride run-up over low heights. Low heights provide a needed
stimulus and obstacle without distracting the athlete from concentrating on tech-
nique. You must spend considerable time with this step. Let your jumper develop a
sense of his or her own rhythm.
• From a five-stride approach, have the jumper run in off a gentle curve to introduce
the use of angular momentum and centrifugal force. At this point, it is essential to
teach the athlete to jump straight up! This is when good fundamentals are learned.
Correcting mistakes will be difﬁcult later if they become ingrained at this time.
• The next step in the progression focuses on the transition and takeoff. At this point
of development, it is quite hard to teach a reﬁned transition into the penultimate
stride. Instead, you should teach the transition in terms of rhythm and cadence,
emphasizing a long and fast penultimate stride and a shorter last takeoff stride.
Having the athlete do three- and five-stride pop up jumps from the grass or apron
is helpful. Emphasize a smooth conversion into the jump.
• Now is also the time to teach driving up with the arms and the free leg. This aspect
is crucial since downward force at takeoff is generated by these limbs driving force-
fully upward. The hands should be punched to face level and the knee should be
driven hard to about waist level without the lower leg extending past the knee.
Next, have the jumper simultaneously jump or stomp off the takeoff foot. This will
propel the athlete straight up off the ground.
When these elements have been learned, repeat steps four and five stressing good takeoff
mechanics.
• The approach run has now been introduced to the beginning jumper. Now is the
time to explain the rudimentary biomechanics of high jumping to your athletes. Done
thoughtfully, this does not require a Ph.D. in physics. First, explain why jump-
ers must run on the curve to jump their best. Have your jumpers start by running
along a curve or circle with a radius of about 17 feet. They can also run a "U" with
a similar radius. Placing one foot ahead of the other on the curve will create a natu-
ral inward lean from the ankles. Be sure good running mechanics and rhythm are

355
C h a p t e r 1 5
incorporated into this drill. Don’t allow exaggerated or artificial posture. The ath-
lete must become comfortable running this way.
Next, plot an approach run for each athlete. For novices, six to eight strides are rec-
ommended. (Later, when their technique progresses, you can add additional strides.
At this point, it is unlikely a novice jumper will be able to control and utilize the
added speed of a longer approach.)
Have the jumper run away from the near standard on a curve (approximately 10–
14 foot radius) with strong, bounding strides. The radius of the curve will be deter-
mined by the athlete’s ability and speed of the run-up, with more advanced jumpers
utilizing a larger radius. This will give the jumper an approximate starting point for
the run-up. Locating the precise position for the jumper to begin the approach is a
process of repetition and adjustment.
• When your jumpers have become comfortable with their run-ups, have them per-
form full jumps over a bar set at low heights. Forget measuring progress in terms of
height. Now is the time to build good technique. Emphasize accuracy, consistency,
rhythm, quickness off the ground and jumping straight up. These are the funda-
mentals of high jumping.
Important! Take your time working through the preceding eight steps. Take two or
three training sessions to progress through these various stages. Perhaps steps 1–4 on day
one, steps 5–6 on day two and steps 7–8 on day three. Don’t be reluctant to return to
these steps later in the season to reinforce proper mechanics. Finally, coaches should
sit their high jumpers down and explain the event to them again to help them visual-
ize what they are trying to do. This will help them focus on high jumping, not just
jumping up to a height.
COACHING TIPS FOR THE HIGH JUMP
• Learn to be an expert observer and trace the origin of problems backwards from
the crossbar. The best viewing point for the coach is directly across from the takeoff
point. This affords a thorough view of the approach run, takeoff and clearance.
• Stress consistency and accuracy in every jump. Success in the high jump is usually
the result of superior execution, not greater effort.
• The high jump begins with the first step of the approach, not the takeoff.
Encourage your athletes to develop a sense of fluid, controlled rhythm. The high

356
C h a p t e r 1 5
jump is an event of rhythmic explosion.
• The most physically demanding task for novice high jumpers is learning the
approach/takeoff transition. Controlling your approach speed is essential in making
this transition. The flat-flat pattern of the last two strides requires a great deal of
practice for young jumpers.
Considerations in Training High Jumpers
• Both the coach and athlete must have an understanding of the physical and techni-
cal skills one needs to be a successful high jumper. This means understanding the
importance of leg strength, explosiveness, rhythm, flexibility, technique and body
awareness.
• The high jump is a technically and physically demanding event. Good high school
high jumpers are usually multiple event athletes. Keeping the legs fresh for jump-
ing while training for other events requires a careful plan by the primary coach and
other event area coaches. High jumpers should not high jump every day!
• High jumping has an important psychological element. In competition jumpers
often face heights they have never attempted. To mentally condition them, occa-
sionally have your athletes attempt higher-than-PR heights in training.
• As mentioned earlier, technical mastery is sometimes impeded by fear of the cross-
bar and fear of the landing surface. A safe and secure landing pit is essential. Using
a padded or soft fiberglass bar will help eliminate the fear of pain from landing on
the crossbar in practice drills.
• Coach "consistency." Without it, most of your athletes’ training is simply wasted.
Training for consistency requires more concentration than physical effort.
• Avoid the temptation to measure every jump in practice. Progress comes from con-
centrating on the process of training, not on the outcome.
Types of Training for the High Jump
Training for the high jump can be divided into three categories:
• General training develops the physical capacity and fitness of the athlete. This
encompasses basic running, weight training, plyometric exercise and rhythm
development.
• Specific training has a direct correlation to the skills necessary for high jumping.
Often, that specific training is simply refined general training. Some examples of

357
C h a p t e r 1 5
specific training would be curve running, running and jumping technique drills
and specific plyometric drills.
• Specialized training duplicates the exact movements of high jumping. This
involves exercises that replicate a specific feature or phase of the jump. Some exam-
ples of specialized training are full speed approach runs, complete jump attempts,
and transition, takeoff or clearance drills.
When coaching high school athletes, the majority of training should be general in
nature for three distinct reasons. First, the basic strength, agility and rhythmic skills of
young jumpers will improve most with general training throughout the season. Young
high jumpers need to develop as athletes before they develop as high jumpers. Second,
with large numbers of athletes to coordinate, few coaches can spend the time neces-
sary for intensive, specialized training. Third, most jumpers are multi-event athletes.
General training fulfills other event demands as well as those of the high jump.
Specific training teaches athletes to be high jumpers. The proportion of specific train-
ing to general training should increase over the course of the season. Specialized train-
ing is the refinement of technique. At the high school level, it should account for only
a modest amount of the total training regimen.
Like any event in track and field, the high jump integrates many types of training:
• Running
• High jumping
• Plyometric training
• Flexibility
• Weight training
• Testing
Running
Running workouts for high jumpers develop overall fitness, endurance, rhythm and
sound running mechanics. Emphasis should be placed on building a strong, fluid
stride and acceleration pattern with relaxed sprinting technique. Long runs during the
off-season will strengthen the jumper and prevent injury. A multi-event athlete may
need to train for a specific running event. This usually will satisfy the general fitness
demands of high jumping.

358
C h a p t e r 1 5
• Long, easy distance runs of 2–3 miles (preseason)
• Long sprint repetitions of 400–600 meters (early season)
• Short sprint repetitions of 50–300 meters (all season)
• Rhythmic tempo runs of 100–300 meters (accelerate
10–30 meters, coast 10–30 meters)
Plyometric Training
Plyometric training can be especially beneﬁcial to high jumpers if used correctly.
Plyometric drills develop the ballistic muscular strength jumping demands and
directly addresses several principles of training for the high jump. Care must be taken,
however, not to overdo plyometric training and incur injury. Read Chapter 5 carefully
for a complete discussion on plyometric training. These drills must be phased out of
training well before major competitions.
• Rhythmic plyometric drills (skipping and bounding)
• Hurdle hops
• Rhythmic run-up jumps
Weight Training
Weight training builds basic muscular strength. The off-season is the best time for
jumpers to direct their efforts to the weight room. After the season begins, weight
training should be used to maintain strength. If jumpers are training hard early in the
season, coaches should not expect great early meet performances. Also, many track
athletes are likely to come directly from another seasonal sport, leaving little time to
undertake a comprehensive strength training program.
Sample Weight Training Exercises
• Half squats (4 x 10 x 60% SRM or 5 x 3 x 90% SRM*)
• Leg extensions
• Hamstring xurls
• Step-ups or lunges
( *SRM= single rep maximum)

359
C h a p t e r 1 5
Technique Drills
Technique drills are the building blocks of high jump technique. All jumpers should
incorporate these drills into their training. Note the purpose of each of these drills.
1. High Jump Skip Drill:
Skipping is LL-RR-LL. On the first LEFT takeoff, driving the knee, lift with the arms
and land back on the left foot, two RIGHTS, repeat.
Purpose: Warm-up; also teaches knee drive, arm coordination and vertical takeoff.
2. “Reverse Spider” and Shoulder Arch Drill:
Lay on your back and reach behind neck with hands, arch back, head back, weight on
hands and feet. Shoulders on ground push hips up with hands.
Purpose: flexibility, teaches arch to head back on clearance.

360
C h a p t e r 1 5
3. Back Flip Over the Bar
With back to bar, jump up and over, delaying feet as long as possible.
Purpose: Teaches back arch, leg lift and timing.
4. Back Flip to the Stomach
Bouncing on pit, throw head back, jump and land on stomach. Beginners must be
spotted and assisted. A must drill to learn.
Purpose: Teaches head back, arch and body awareness.
5. 1-2-3 Arm Action Drill
Starting left foot forward, right arm forward, step with right, hold right arm on hip.
Step with left, left arm back (both arms are now back)... takeoff!
Purpose: Teaches proper arm action. Outside arm keeps moving through the jump.

361
C h a p t e r 1 5
6. 1-2 Hurdle Drill
Using two high hurdles, step right-left, leaning away from bar.
Purpose: Teaches proper plant.
7. Circle Drill
Using cones or lines scribe a 30’ circle. Practice running around this…shuttle athletes
in and out.
Purpose: Learning to run on a curve.
8. Half Circle “Run-Bys”
Using a half circle to the bar, run by the bar.
Purpose: Staying on the curve to the plant.
9. Half Circle Jumps
Using a half circle approach, jump off the curve over the bar.
Purpose: Learning to jump leaning away from the bar.
10. Five Step Jumps
Jumping using only the last five (curve) steps.
Purpose: Allows more jumping and technique work.

362
C h a p t e r 1 5
11. Full Run “Run-Bys”
Full run-up, but instead of jumping, run by the bar.
Purpose: Run-up practice accuracy and “staying on the curve-to-the-plant!
12. Timed Approaches
Run-ups are timed when foot leaves the ground at start until foot plants
(about 3.2 seconds)
Purpose: Determine which speed gives the best clearance. Practice consistent run-up.
13. Box Jumping
Use a takeoff box, 15 centimeters (6 inches) in height. It will allow the jumpers to
jump 30 centimeters (one foot) higher. Mostly for fun.
Purpose: Confidence, more clearance time and fun.
14. Goal Post and Basket
Jumping for height, try to reach as high as you can. Good inclement weather drill
in gym.
Purpose: Teaches jumping with Power.

363
C h a p t e r 1 5
15. “Goofy” Jumps
Jump from the opposite side off of other leg, flop from straight on, straddle jumps,
scissor for height, forward flip over the bar.
Purpose: Have fun.
High Jumping
To train specifically, an athlete needs to high jump in training, though not more than
twice per week. It is hard to high jump well while engaged in hard training, so sched-
ule jump training accordingly. Jump workouts should address technique, endurance
and maximum effort. Each session should emphasize a single aspect.
Technique Jumps. This type of jump training should be done most often. One jump
workout per week should focus on technique. Take 10-15 full-approach jumps with
the crossbar set at least six inches below PR height. Allow adequate rest between these
jumps and stress good technical execution. This is why the bar is set low. If the jumper
is performing well, the bar can be raised one or two inches after several jumps.
Endurance Jumps. Endurance jumping develops specific jumping fitness and rein-
forces the need for consistency. Jumpers should do 20-30 jumps, depending on their
fitness. Start approximately eight inches below the athlete’s PR and have him or her
take three jumps at each height in two inch increments. After two misses at a height,
lower the bar.
Maximum Effort Jumps. After a good warm-up, the jumper takes 5-10 jumps at near
PR height or better without regard to clearance. This demands intense concentration
and maximum effort; however, the coach should continue to emphasize good techni-
cal execution. If an athlete performs well in this training session, a new improvement
in competition should be close at hand. These workouts should begin early in the
competitive season and continue through mid-season. Do max jumping once every

364
C h a p t e r 1 5
two weeks in the early season and once per week with fewer jumps during mid-season.
Remember, however, the central focus must be on the process of training, not jumping
for height.
Jump Testing
The ultimate test of progress in training is the athlete’s performance in competition.
Nonetheless, coaches should test the physical skills of their athletes periodically. This
helps identify each athlete’s areas of strength and weakness, and it provides encour-
agement and motivation as well. Test three to four times throughout the school year
if possible. Testing at the end of the season will provide returning high jumpers with
training objectives for the following year.
Sample Jumper Test (2 or 3 x each)
• Vertical jump
• Standing triple jump
• 50m sprint
• 8-10 bounds for distance
• 5 consecutive two leg hops
• SRM bench press
• SRM half squat or leg press
• SRM snatch or clean
An Important Reminder About Rest
Many coaches and athletes fail to realize that rest and recovery are an essential part of
the training process. “No pain, no gain” can only accomplish so much. Sore and ex-
hausted muscles cannot perform well. Sometimes it may be necessary to train through
a meet, but when it comes to jumpers, nothing improves performance better than rest.
A Training Periodization Plan for the Season
As with other events, training for the high jump should be periodized over the course
of the school year or season. Periodization is the division of training into phases or
periods emphasizing different goals and types of training. Periodizing training frames
the progress of training and skill development for the high jumper.

365
C h a p t e r 1 5
Generally, three to four weeks is the maximum period over which athletes can sus-
tain improvement with any single type of training. After that, training results tend to
diminish. Accordingly, coaches should integrate different types of training with each
other. In a two- to four-week training phase, primary emphasis should be given to one
type of training. secondary emphasis to another, and less emphasis (maintenance train-
ing) to a third type. Within any training plan, it is not recommended to have more
than three quality, or hard, training days per week, including competitions. The other
days should consist of easy training or recovery days.
The goal of periodization is to manage the stress of training to produce improvement.
Tactics and Strategy for High Jump Competition
Athletes need to be well educated in the rules of the event to make smart tactical deci-
sions during competition, For example, the procedure used for breaking first-place ties
in the high jump will often dictate the heights a jumper will attempt or pass in the final
stages of a competition. The goal in any competition is to place as high as possible. The
next objective should be to set a personal best or simply perform well. Before the meet,
coaches and athletes should become familiar with the high jump aprons at away meet
sites so practices can be tailored to jumpers’ approaches during the preceding week.
Mental Preparation
Pre-meet anxiety can greatly inhibit performance. This nonproductive emotion
can leave the athlete drained when it comes time to jump. Athletes must learn to
keep nervous energy under control and in reserve for the competition. The best
way to accomplish this is to teach athletes simple relaxation techniques and positive
visualization skills. All successful athletes see themselves succeeding. All athletes must
believe in themselves.
Determining Opening Heights
Use the athlete’s warm-up jumps to determine at what height to enter the competition.
If an athlete is jumping well in warm-ups, three height progressions, or six inches be-
low the personal best is usually a good opening height. If an athlete is struggling with
his or her approach, the coach should have the jumper open at a lower height so he or
she can work out problems early in the competition. If the opening height is higher
than the athlete is accustomed to starting, have the jumper work his or her way up to

366
C h a p t e r 1 5
that height during his warm-up jumps. This will bolster the athlete’s sense of readiness
when the competition begins. Never allow your jumpers to wear their warm-up suits
in competition at lower heights! With one or two misses, any psychological or tactical
advantage is reversed, and the stage is set for disaster!
Determining Height Progressions
In most high jump competitions, the bar is raised in increments of two inches until
two or three jumpers remain. Those jumpers then determine the remaining heights to
be attempted. It is recommended coaches have their athletes jump at two-inch incre-
ments until they are going for the win. Then, the coach and athlete should make a tac-
tical decision whether to proceed by one- or two-inch increments. In league champi-
onship and section and state qualifying meets, it is important to anticipate what height
will enable the athlete to advance. This mark seldom varies much from year to year. In
a qualifying competition, coaches should keep track of the remaining competitors and
how they performed at lower heights to determine if a one- or two-inch improvement
will be needed for the high jumper to qualify for the finals.

367
C h a p t e r 1 5
FLOP CHECKLIST
1. Intense concentration on execution.
2. Rhythmic and consistent approach speed. Maximum use of build up speed.
3. Curved run continued to takeoff so there is lean away from the bar
(approximately 70-degrees) at the plant.
4. Last two steps of the footpath approach should be 35-degrees to the bar
resulting in a 45-degree center of mass clearance.
5. Low center of mass through the penultimate step.
6. The foot plant should be on the “center of mass” line of the approach.
7. Strong double-arm action at takeoff, stopping the upper arms horizontal
to the ground and returning to the thighs
8. Upper body “twist” takes place after the foot has planted.
9. Front-to-back plant created a takeoff through the vertical axis of the body.
10. Outside arm continuous to the plant.
11. Inside arm holds on last step and arms never move backwards together.
12. Aggressive knee drive to a horizontal thigh position.
13. Drive up through the vertical axis of the body (back to front and left to right).
14. No arch on takeoff.
15. Head turns away from the bar with the shoulders then back (not to
the side).
16. Good arch over the bar. Hips higher than the knees and shoulders.
17. Lead leg should not straighten until hips clear.
18. Hold an arched position until the hips clear.
19. Good timing of the lower legs and hip drop.
20. Land on the middle to lower back, arms and legs in front of the body.

368
C h a p t e r 1 5
RUNNING warm-up:
Pre-stretch Plus:
FLEXIBILITY/MOBILITY EXERCISES:

RHYTHMIC PLYOMETRIC DRILLS:

HIGH JUMP TECHNIQUE:
q Skipping
q Hopping
q Bounding
WARM-DOWN:
WEIGHT TRAINING:

Notes:
H I G H J U M P E R S ' W O R K O U T

369
C h a p t e r 1 5
RUNNING warm-up:
Pre-stretch Plus:

RHYTHMIC PLYOMETRIC DRILLS:

HIGH JUMP TECHNIQUE:
q Skipping
q Hopping
q Bounding
WARM-DOWN:
WEIGHT TRAINING:

Notes:
S A M P L E H I G H J U M P E R S ' W O R K O U T
3
1
2
3
4
6
7
5
March 6
Yoga series plus special HJ stretches
1600m, Surging Alt. 100m in the last 2 laps
3
Swing skipping/ankle bounces/high knees/butt kicks
Team meeting tomorrow at 3:40. Be on time!
2 x 60m power skips
Back-overs x 5, Scissor jumps x 5, Pop-ups x 10
3
2 x 6H full effort
2 x 60m
1 x 300m 1 x 200m 1 x 150m at incr, speed
800m
8

370
C h a p t e r 1 5
Flexibility Trng
4x100 on Curve
2 x 300
Meet
St. Joe
Invitational
Meet
Goshen
Relays
Rest Day!
Technique Reps
Approach Runs
takeoffs
Plyometrics
Warm-Up
Stretch
4 x 150 Strides
Warm-Up
Stretch
Away Meet
vs
Jackson
Away Meet
vs
Adams
Home Meet
vs
Riley
Home Meet
vs
La Salle
Warm-Up
Stretch
5 x 100 Strides
Team Meeting
Warm-Up
Stretch
Rhythm Drills
4 x 80 Strides
Team Meeting
Warm-Up
Stretch
Tech Approach
Runs x 10
Team Meeting
Warm-Up
Stretch
Rhythm Drills
Approach Runs
(Rhythm Series)
8 x 150m
Tech Jumps
20-25 full jumps
6 x 50 on Curve
Tech Jumps
20 full jumps
6 x 100 Tempo
Weights
Performance
Jumps
Weights
Tech Drills 2-3
Mile Easy Run
Tech Drills
Backovers
Scissors Jumps
Trans Pop-Ups
Plyometrics
1 x 300-200-100
Tech Drills
Backovers
3-Stride Drills
Hip Thrusts
Plyometrics
4 x 200
Tech Drills
(full session)
4 x 150
(float-accel-float)
Sprint Drills
Plyometrics
(full session)
Easy Run
or
Rest Day
Easy Run
or
Rest Day
Easy Run
or
Rest Day
Easy Run
or
Rest Day
1
8
15
22
2
9
16
23
3
10
17
24
4
11
18
25
5
12
19
26
6
13
20
27
7
14
21
28
Sample 4-week HIGH JUMP Training Plan, April 1–28

371
16
C h a p t e r
Training Pole Vaulters
The pole vault is the most athletically demanding event in track and
field. Pole vaulting requires speed, strength, coordination, kinesthetic
awareness, gymnastic ability and a unique type of courage. The pole
vault entails a certain degree of physical risk which must be controlled
by the athlete, coach and necessary safety precautions. Nonetheless,
the pole vault is a thrilling event for both the athlete and spectator.
Every high school head coach should have adequate knowledge of
the event.

372
C h a p t e r 1 6
A Philosophy for Coaching the Pole Vault
The pole vault is the most complete test of athletic ability in track and field. Good
vaulters are almost always good all-around athletes. Pole vault coaches must develop
and recruit athletes with a wide range of skills. When selecting potential vaulters,
a coach should look for athletes who possess or are willing to develop speed, upper
body strength, gymnastic ability, intense concentration and a real commitment to the
event. Pole vaulters are often emotionally similar to skiers, surfers or skateboarders
– that is, they enjoy physical challenges with some degree of risk.
A coach should first train pole vaulters to be good all-around athletes. Second, vault-
ers must be encouraged to develop the mental ability to put themselves into unknown
areas of effort and achievement. All vaulters must be taught to visualize success.
The complex technique of the pole vault demands coaches teach using the "whole-
part-whole" method. In other words, young pole vaulters must be taught to under-
stand the pole vault as a whole first, then learn technique through repetition of
specific drills that are essential to learning the event. Finally, partial skills should be
integrated into a complete pole vault.
The philosophy for coaching the pole vault must be based on safety. Any vaulting drill
or exercise carries a certain degree of physical danger for the athlete and even for the
coach. Safe facilities, safe equipment, safe training techniques and continuous supervision
are mandatory for the pole vault.
Ensuring Safe Participation
Safe Facility
Safe pole vaulting requires a safe facility. A pole vault facility includes the landing pit,
runway, vault box, standards, vaulting poles and training equipment. The landing pit
should meet section, state and National High School Federation minimum standards.
The vault box should be set flush into the runway with no raised edges that can snag
a pole during the plant. If the area around the box has an exposed surface, a 2” dense
foam Box Collar should be used. The standards should sit on a firm level area, pref-
erably cement pads, and should be covered with Standard Base Protection Pads. The

373
C h a p t e r 1 6
pole vault runway should be smooth and level, and whenever possible directed to take
advantage of the prevailing wind conditions (tailwinds). Vaulting into a crosswind or
headwind is very difficult even for advanced pole vaulters and may lead to inconsis-
tency, poor technique and unsafe vaulting.
Safe Use
Coaches must ensure facilities and equipment are used properly. The pole vault pit
should not be used as a playground, tumbling mat or lounging area. The straps which
secure the landing pit components together must be secured at all times and in good
repair. A protective cover should be used whenever the pit is not in use.
Fiberglass vaulting poles are easily damaged. Vaulters must protect their poles by
placing them in their shipping tubes and storing them in a safe area. Poles should
never be dropped on the ground or allowed to hit unpadded metal standards.
Damaged poles will break!
Coaches and athletes must follow manufacturer recommended guidelines for safe usage.
Coaches should never allow a vaulter to use a pole rated below his or her weight.
Safe Training
Coaches must teach athletes to use safe vaulting techniques in all phases of the vault.
In the plant phase, proper grip height for the amount of force generated at takeoff is
essential. A hand grip too high for the amount of force generated at takeoff will cause
the vaulter to stall and fail to reach the pit. A hand grip too low will cause the vaulter
to over-penetrate the pit and risk landing beyond the back or sides of the pit.
Principles of Training
As with any other event, universal principles of training apply to the pole vault.
In order for the athlete’s physical capacity for exercise to increase, the body must be
subjected to increased stresses, or overload. The body, in response, adapts to this stress
resulting in increased capacity. This cycle of stress and adaptation is the foundation of
all training. It is also known as the SAID principle, the specific adaptation to
imposed demands.

374
C h a p t e r 1 6
Specificity
The body adapts to specific demands placed upon it; therefore, training for the pole
vault needs to specifically address the requirements, strengths and skills needed for
proper technique in the event.
Repetition
This principle is an outgrowth of the specificity requirements. Especially with a tech-
nical event like the pole vault, the neuromuscular patterns of technique need to be
enforced through repetition of movement. This usually entails breaking down the
vault into its components and performing them repeatedly with proper technique.
Recovery
the applied stress. Pole vaulters need a good amount of recovery to be fresh for com-
petition. Since much of the training they must do is quite demanding, pole vaulters
require plentiful rest even though they may not feel tired or worn out. Pole vaulters
cannot vault every day and expect to do well in competition.
Individuality
Respecting the principle of individuality is an important concept for the coach of
high school vaulters. It is not uncommon to have jumpers performing at heights rang-
ing from seven feet to almost 17 feet. Age and strength differences have profound
effects on vaulters. Freshman vaulters cannot be developed by using the same training
as top upperclassmen.
Aside from the general principles of training, there are several principles which apply spe-
cifically to the pole vault.
Accuracy and Consistency
The single most important factor in pole vault performance is the execution of an
accurate, controlled approach run and pole plant. This accuracy requires consistent
performance of the same approach run in repeated vaulting attempts. Accuracy and
consistency are the foundation upon which pole vault skills and technique are con-
structed. Consistent and accurate vaulting is the best way to guarantee safe vaulting.

375
C h a p t e r 1 6
Rhythm
Pole vaulting, like most events in track and field, is an expression of power through
rhythm. Rhythm provides a reference for the control of speed and power. Rhythm
allows the athlete to relax while exerting tremendous effort and provides a cadence
for exerting maximum effort at the takeoff. The running rhythm of the pole vault
is different than that of a 100-meter sprinter. A 100-meter sprinter must maintain
maximum speed for a prolonged period of time, while a pole vaulter must achieve
maximum speed at takeoff.
Explosiveness
Explosiveness is a crucial component vaulters must develop. The pole vault is a cata-
pult that launches the body into the air by transferring the energy produced by run-
ning through the plant into the pole. The vaulter becomes a projectile accelerated by
the energy stored in the pole. A vaulter who is more explosive can run faster, develop
more potential energy and vault higher. The training of vaulters needs to specifically
develop explosiveness through weight training, plyometric training and vaulting.
To excel at pole vaulting, the athlete must develop the ability to control the position
and posture of his or her body while in motion on the ground and in the air. The ath-
lete must develop a “feel” for his or her body and how it moves. Drills and repetition
refine this awareness.
Technique, Start-to-Finish
(All following descriptions assume a right-handed vaulter.)
The Pre-Start Position, Hand grip and Hand spread on
the Pole
Standing on the runway (how far back on the runway will be covered later) fac-
ing the pole vault pit, the vaulter places the left foot at the start mark with the right
foot slightly behind and to the right. The vaulter should hold the pole at his or her
side with the hands no more than hip width apart (approximately an 18-inch hand
spread). The right hand (top hand) should use a closed grip with the thumb on top.

376
C h a p t e r 1 6
The right hand supports the pole at the start of the approach and should be held in
advance of the right hip at the side of the body about waist high. The vaulter’s left
hand holds the pole — thumb under, knuckles up — in front of the chest a few inch-
es away from his body. The left elbow should be bent 90-degrees and the right arm
should be slightly flexed. The approach should begin with the vaulter tall and upright,
holding the pole balanced at a 75-degree angle.
The Approach
The approach in the vault is unlike any other event in track and field. Carrying a
pole requires the vaulter to maintain an upright posture with a bounding type of run
throughout the full approach. The goal of the approach is for the vaulter and the
pole to run as one unit, maximizing efficiency and speed.
The vaulter should use three runway check marks. The first and second marks are for
the vaulter; the third is for the coach. The first check mark is placed at the start of
the approach run. The second check mark should be placed at the second-stride mark
(second left footstrike). The third check mark should be placed six strides (three left
footstrikes) from the pole plant and takeoff point to help the coach monitor the con-
sistency of the vaulter’s approach.
The beginning vaulter should use a 10–12-stride approach into the pole plant and
takeoff. An intermediate vaulter should use a 14–16-stride approach.
No matter what the length of the approach, the last four strides must be an aggressive
acceleration into the plant and takeoff with a short, fast final stride.
The Start of the Approach
The vaulter’s right hand should be held steady in advance of the hip, at waist height.
The left hand holds the pole a few inches away from the chest as the initial body lean
and the push-off of the left foot tilt the pole toward the pit.
The Acceleration and Pole Drop
Acceleration should continue throughout the approach into the plant and takeoff;
however, there must be a marked increase in stride frequency over the final four strides
leading into the takeoff.

377
C h a p t e r 1 6
The tip of the pole should be held at a 75-degree angle until the sixth stride from
takeoff (third left from the takeoff). At that point the athlete should allow the pole
to drop over the next four strides with the natural weight of gravity. This will place
the pole at a position just below horizontal two strides (last left) before the takeoff.
Using this technique allows the vaulter to run without resistance while maintaining
good running posture and mechanics. The vaulter’s right hand should be just above
waist level at this point. The left hand remains at the middle of the chest and acts as
a fulcrum for the pole as the tip nears the box. The vaulter’s running form should be
smooth and relaxed with the body erect and hips and shoulders facing the pit.
The Pole Plant and Takeoff
The plant begins when the vaulter’s left foot strikes two strides before the takeoff. The
right hand should move vertically up the side of the body, past the cheek and in front
of the ear. The left hand, while guiding the pole tip onto the front edge of the box,
should also be moving up while helping to turn the pole over so the bend direction
(soft side) is facing the pit. In order for a proper takeoff position, the arms must lead
and be in front of the leg movement.
During the plant, the vaulter’s chest, shoulders and hips must stay square to the pit.
The takeoff starts before the pole tip makes contact with the back of the vault box.
The vaulter should drive (jump) upward and slightly forward. The vaulters entire
body should be in alignment from head to toes, applying force in one upward direc-
tion. The right (top hand) and left arm (bottom hand) should be fully extended, and
the lead knee (right knee) driving upward.
The vaulter’s plant foot should be slightly behind the top hand and in the center of
the runway.

378
C h a p t e r 1 6
The Follow-Through
A follow-through phase occurs just after takeoff. The follow-through is more pro-
nounced on a properly bending pole and markedly less on a stiff, non-bending pole.
The vaulter’s takeoff leg becomes the trail leg and drags behind the hips in a natural
follow-through reaction. The arms will attain a gymnastic high bar position above
the head as the chest advances toward the pit. The lead leg follows its natural running
course and finishes in front of the body with the foot behind the knee. If done cor-
rectly, the vaulter’s body reaches an “inverted C” position with the handgrip at the top
of the “C” and the trailing foot at the bottom of the “C.” Achieving a “C” position
should not be coached, but, rather, should be a result of a proper takeoff. The head
should stay level as both hands are extended and continue to apply pressure down the
shaft of the pole. The shoulders should remain square to the pit in advance of the hips.
The Swing
The swing, sometimes called the rock-back, starts when the pole contacts the back of
the box and the takeoff foot (left foot) leaves the runway. A proper swing is the result
of a proper takeoff and a long leg swing and continuous arm pressure (pushing) down
the shaft of the pole.
With both arms and hands extended up through the takeoff, the athlete will naturally
assume an “inverted C” position. Achieving an upside down vertical position from
the “C” position requires both a long, fast-leg swing and continuous arm pressure
(pushing) down the shaft of the pole.
Although the left arm may be slightly flexed during this phase, it is important to teach
the vaulter not to pull. Pulling will stop forward momentum causing the vaulter to
land shallow in the pit. Proper execution will allow the vaulter’s body to begin rota-
tion around the pole. Turning should begin during this phase of the vault prior to

379
C h a p t e r 1 6
The Pull-Turn and Push-off
The “Pull-Turn” and “Push-Off” can only be completed properly if the prior phases
of the vault have been successfully accomplished. After achieving a fully upside down
vertical position, the vaulter should continue the rotation of the body by pulling and
rotating around the pole. Staying tight or close to the pole will decrease the ability
of the pole to lift vaulter higher faster. The vaulter should remain rigid and rotate
around the pole. As the pole becomes vertical, the top hand continues to push down
on the pole. The head should be down and in line with the back. The vaulter, then,
releases the pole toward the runway with a flick of the wrist.
reaching an upside down vertical position. Throughout this phase the vaulter’s body
should remain extended and the head should stay in line with the spine. At the end of
the swing phase, the vaulter’s body should be extended in a vertical position, rotated
90-degrees, with feet up and shoulders down in line with the pole.

380
C h a p t e r 1 6
The Fly-Away and Landing
The “Fly-Away” is a continuation from the momentum of the swing. When the body
has reached maximum height, the feet will drop and the body will rotate around the
cross bar. It is important to teach vaulters to relax during this stage. The most com-
mon error is for a vaulter to panic, throwing the arms back and by doing so dislodg-
ing the cross bar with the chest. Upon clearing the crossbar, the vaulter relaxes and
drops to the pit, landing on the back.
Introducing the Pole Vault to Beginners
Holding the Pole
When first introducing the use of the pole, coaches should teach the correct grip and
carry. The pole vaulter should also learn to identify the natural bend direction of the
pole by holding the pole loosely at the top with the tip on the ground and letting the
pole roll to its natural bend side, or soft side. That side of the pole must be carried
down during the run and must be turned to face the pit at the plant. Most poles have
a trademark or label indicating the soft side of the pole.
Learning to Run, Plant, and Swing
• After a brief demonstration of a full vault (or after viewing a brief video), the
beginning vaulter should be taught the proper hand grip. This is done by standing
the pole directly up in front of the vaulter and having him or her reach out and
grasp the pole at arm’s reach above the head with the right hand. The left hand
should then reach straight out and grasp the pole approximately 18 inches below
the right hand. Both thumbs should point up.
• A narrow grip is the best way to teach young vaulters how to bend the pole
properly. A narrow grip demands proper pole carry, plant mechanics and swing
mechanics. Without a large base of support (grip width), the narrow grip only
allows proper technical execution of vaulting drills and gives immediate feedback.
Shock during any part of the vault is an indicator of inefficient technique and
energy loss. By using the narrow grip, a vaulter can enhance and expedite the
learning process of the pole vault technical model. A vaulter who can bend a pole,
at his or her weight rating or above with a narrow grip is achieving near perfect
technical execution.
• With a very narrow handgrip, which is slightly higher than can be reached with the

381
C h a p t e r 1 6
pole vertical, have the vaulter stand on the pit and swing to the ground. Repeat this
many times, encouraging the vaulter to keep both arms as straight as possible and
apply pressure down the shaft of the pole. The vaulter should swing down to the
ground in a straight line. Next, with the vaulter keeping the upper body behind the
pole, have him or her bring the right knee up and land on the ground facing the
pit where he or she started. Do not allow the vaulter to rock back.
• When the vaulter becomes comfortable swinging on the pole, move him or her
three or four steps in front of the box and have the athlete walk, jog, plant the pole
and swing into the pit. To help the vaulter, the coach can stand at the box and
grasp the pole when the vaulter plants it and then help pull the pole through to the
vertical position.
Coaches should emphasize the correct plant technique and a long swing into the
pit with the body fully extended. Gradually add more strides, more speed and a
higher hand grip. This progression should not be rushed. Coaches must ensure the
vaulter is developing the proper pole carry, good rhythm and a good plant position
before progressing to the next drill.
• The progress of the vaulter will determine when the coach should put up a crossbar
and have him or her attempt to actually vault over it. With younger vaulters, it may
be necessary to put a bar up on the first day of practice to keep them interested. If
so, keep the bar low and easy to clear. With older, more mature athletes, it is best
to wait two to three weeks before letting them vault at a crossbar. During that time,
the vaulter should learn to air vault off the top of the pole.
Technique Goals for the Beginning Vaulter
• Use the proper hand grip, and bend direction of the pole.
• Carry the pole properly throughout the run.
• Develop a consistent approach run of 10–12 strides with properly placed check marks.
• Accelerate into the plant.
• Assume the proper body/pole positions at plant and takeoff.
• Vault in line with the runway and land in the middle of the pit.
• Do not be concerned with bending the pole right away.
• Establish the rhythm of the plant/swing/clearance.

382
C h a p t e r 1 6
• Vault consistently in practice with the crossbar set 18–24 inches behind the plane of
the back of the vault box. (Require five consecutive clearances at each height before
raising the bar.)
• Safely progress to an effective hand grip equal to the height of the bar. (An 11'8"
hand grip = an 11'0" vault.)
Technique Goals for the Intermediate Vaulter
• Master all of the above techniques.
• Use of a wider grip (18").
• Use a consistent approach run of 14–16 strides with properly placed checkmarks.
• Start the approach with a powerful open stride and accelerate aggressively into
the takeoff.
• Use good sprint technique and high-knee lift throughout the approach.
• Develop the proper preparation for takeoff that provides lift without reaching or
losing speed in the last two strides.
• Complete the plant/takeoff before the pole tip contacts the back of the box.
• Swing through in an extended body position from takeoff to rock-back.
• Bend the pole effectively while following the manufacturer’s weight rating.
• Perform safe and consistent vaulting 2–12 inches above the hand grip, while keeping
the crossbar 18–24 inches behind the vertical plane of the back of the vault box.
• Perform safe vaulting with a grip 1.90 times the reach height.
For example, a 7' reach x 1.90 = 13'4" hand grip = a 13'6" vault.
Coaching the Fundamentals
Performance Objectives for the Athlete
• Practice safe vaulting techniques.
• Develop a fast and consistent approach run with the pole.
• Perfect the proper pole-plant technique.

383
C h a p t e r 1 6
• Train to be an all-around athlete.
• Train for optimal performance in competition.
Teaching Objectives for the Coach
• Determine each athlete’s proper grip height and pole size.
• Develop a consistent approach run.
• Train athletes to use the hands to move the pole into the plant position, three strides
before the takeoff.
• Train athletes to plant the pole onto the front edge of the box.
• Train athletes to develop a kinesthetic awareness of proper body/pole alignment
at takeoff.
• Train athletes to push and not pull during the plant and swing phases.
• Train athletes to accelerate into the plant/takeoff.
• Train athletes to use a fast swing phase rotating around the pole.
• Train athletes to keep the body behind the pole.
• Teach the vault as one continuous motion.
Pole Selection
Selection of the proper pole is crucial to successful pole vaulting. Many factors influ-
ence pole selection including the vaulter’s weight, height, grip height, hand spread,
pole-plant technique, jumping ability and takeoff speed.
For the intermediate and advanced vaulter, use penetration and pole bend as your
guide. Penetration is the distance the vaulter travels forward into the landing area
from the takeoff point. If the vaulter swings too deep into the landing area, or if the
peak height of the vault occurs more than 24 inches beyond the horizontal standard
setting, there is excessive penetration and the vaulter should move to a stiffer pole.
Poor penetration occurs when the vaulter fails to swing beyond the front of the pit
or the pole fails to come to a vertical position.
Twelve- and 13-foot vaulting poles can accommodate a large variety of handgrips for

384
C h a p t e r 1 6
the beginning vaulter. However, the general recommendation for top hand grip range
when bending a pole is between is 18 to six inches from the top of the pole.
Guidelines for Beginning Vaulters
• Never use a pole rated below the vaulter’s weight.
• A short approach of eight strides or less and a grip height of 12 feet or less are rec-
ommended for learning the fundamentals of vaulting technique.
• Correct takeoff technique is a powerful forward and upward movement with the
takeoff foot directly below the top hand in the center of the runway while using the
highest possible pole-plant position.
• The vaulter will bend the pole and land in the center of the pit if he or she uses
proper plant/takeoff technique.
• The objective of learning proper, safe vaulting technique should always precede
clearance height objectives. Achieving a “C” position should not be coached, but
should be a result of a proper takeoff.
Guidelines for Intermediate and Advanced Vaulters
• Never use a pole rated below the vaulter’s weight. It is not uncommon for vaulters
to require poles rated 10–25 pounds above their body weight.
• Before raising a vaulter’s grip height, he or she should be clearing heights at least
equal to that grip height.
• Use the following guidelines once the vaulter develops a proper approach run and
good pole plant/takeoff technique:
• Move to a stiffer pole when the pole bend exceeds 90-degrees and excessive penetra-
tion occurs.
• Raise the grip height when excess penetration with a small pole bend occurs.
• Lower the grip height when there is poor penetration and the pole bend exceeds
90-degrees.
• Move to a softer pole when both poor penetration and a small pole bend occurs.

385
C h a p t e r 1 6
Grip Height/Takeoff Distance/Six Stride Check mark
The importance of the grip height cannot be overemphasized. Using the proper grip
height is the key to developing efficient, safe vaulting technique.
Use the chart below to determine the proper grip height on the pole, takeoff dis-
tance from the back of the box, six-stride check mark placement, and six-stride time
into the takeoff.
This chart is based on an average reach height of 7'4". For any given grip height,
shorter vaulters will take off further out and taller vaulters will be closer. Select a grip
height based on the vaulter’s skill level that allows him or her to swing safely into the
pit. Then, based on the chart, place a check mark next to the runway for the six stride
mark. Use the check mark to check the consistency of the approach before the takeoff.
BEGINNING VAULTERS
7’6” 9’8” 6'4" 32’0” NA
8’0” 9’11” 6'8" 33’0” NA
8’6” 10’3” 7’0” 34’0” NA
9’0” 10’6” 7’4” 35’0” NA
9’6” 10’10” 7’8” 36’0” NA
10’0” 11’1” 8’0” 37’0” NA
10’6” 11’5” 8’4” 38’0” NA
11’0” 11’8” 8’8” 39’0” NA
INTERMEDIATE VAULTERS
11’6” 12’0” 9’0” 40’0” NA
12’0” 12’3” 9’4” 41’0” NA
12’6” 12’7” 9’8” 42’0” NA
13’0” 12’10” 10’0” 43’0” :01.56
13’6” 13’2” 10’4” 44’0” :01.53
ADVANCED VAULTERS
14’0” 13’5” 10’8” 45’0” :01.50
14’6” 13’9” 11’0” 46’0” :01.47
15’0” 14’0” 11’4” 47’0” :01.44
15’6” 14”4” 11’8” 48’0” :01.41
16’0” 14’7” 12’0” 49’0” :01.38
16’6” 14’11” 12’4” 50’0” :01.35
B A R H E I G H T G R I P H E I G H T T A K E O F F D I S T A N C E 6 - S T R I D E C H E C K M A R K 6 - S T R I D E T I M E

386
C h a p t e r 1 6
The time for the last six strides does not play a role in the potential success of a vault until
the height attempted reaches 13 feet. The times listed on the chart are hand times and
are averages. A vaulter who does not achieve the average time for these six strides into
the takeoff can expect a vault below the height listed for that time on the chart. A
vaulter who runs faster than the average time listed can expect a vault greater than the
height listed, given proper vaulting technique.
Approach Length / Stride Pattern / Check marks
The approach should use a sufficient number of strides for the vaulter to achieve
maximum speed at takeoff while allowing for consistency and control. The first check
mark can be determined by the vaulter placing the takeoff foot the correct distance
from the plant box, turning to face away from the pit and running the number of
strides toward the end of the runway that allows him or her to attain maximum con-
trolled running speed. The start marker is placed where the takeoff foot strikes the
runway after 10–16 strides. The second checkmark should be placed two running
strides from the first. Hitting this mark is crucial to executing a consistent approach
run. These two marks allow the vaulter to check the accuracy of the start of the
approach. A third marker placed six strides from the takeoff point should be used by
the coach to check the accuracy and consistency of the approach run.
The beginning vaulter should use 10–12 progressively faster strides into the pole
plant/takeoff. The vaulter may either count these strides by counting the number of
times the takeoff foot strikes the runway (five or six times) or by using visual cues
along the side of the runway.
The intermediate vaulter should use a 14-16-stride approach to the plant/takeoff, two
strides to the second checkmark, eight strides to the coach’s checkmark and six strides
to the plant/takeoff mark.
Penetrating the Pit
When the vaulter transfers force into the pole during the plant/takeoff, the pole bends
and stores that force for recoil. That recoil, horizontal speed and the swing carries the
vaulter toward the pit. This is called penetrating the pit or penetration. Optimum
penetration is the result of using the correct grip height for the amount of force trans-
ferred toward the pit at takeoff. The greater the force transferred, the higher the vaulter
can grip the pole. Less force transferred will necessitate the use of a lower hand grip.

387
C h a p t e r 1 6
Good penetration is achieved when the vaulter can swing through and clear a bar
with the standards placed at the maximum depth from the vertical plane of the plant
box. Poor penetration occurs when the pole fails to reach a vertical position and the
vaulter fails to reach the vertical plane of the back of the vault box.
solving problems in pole vault techni q ue
PROBLEM SOLUTION
Lack of Penetration Lower the grip height.
Correct body posture at takeoff.
Increase acceleration over the final four strides into the takeoff.
Move the pole into plant position earlier.
Aggressively complete the takeoff action.
Move to a softer pole.
Poor Pole Plant Begin the plant action earlier.
Correct body posture at takeoff.
Use the left hand to move the pole into proper position.
Poor Swing and Extension Lower the grip height if penetration is poor.
Raise the grip height if penetration is excessive.
Delay collapsing against the pole too soon.
Speed up the swing phase.
Apply more upward and less outward pressure on the pole with
the bottom arm.
Swing Speed
Poor penetration will decrease the vaulter’s swing speed, making it impossible for him
or her to safely rock-back and complete the vault. Excess penetration (too low a grip
height for the amount of force transferred at takeoff) will not allow the vaulter enough
time to complete the swing and reach the fully inverted position. If the athlete has a
proper takeoff, adjusting grip height up or down approximately four inches will usually
correct penetration problems.
Methods of Training
Of all track and field events, the pole vault requires the greatest range of athletic ability.
Training for the pole vault should include running, sprinting, weight training, plyo-
metrics, gymnastics, flexibility exercises, vault-specific drills and, of course, vaulting.

388
C h a p t e r 1 6
General Conditioning
The greatest improvements in pole vaulting technique will come with the develop-
ment of good overall physical conditioning through running and strength develop-
ment. In order to develop the strength required for the pole vault, the following
points should be noted:
• Pole vaulters need to have good strength relative to their body weight, but they do
not need to become bodybuilders.
• Priority should be given to the development of explosive power. Plyometrics is an
ideal way to develop this explosiveness.
• Pole vaulters must develop the body core to bring together upper and lower body
strength development
• To develop a high level of skill there should be a close relationship between the
development of strength and the development of rhythm and coordination.
• Flexibility, rest, and recovery also play a major role in enhancing physical
development, balance, and conditioning.
Recommended Lower Body Exercises, Without Weights
• Hamstring curls using an elastic strap, either fixed or held by a partner, ankle
weights or weighted shoes.
• Lunges
• Step ups
Recommended Body Core Exercises, Without Weights
• Bear crawls
• Backwards bear crawls (up stairs)
• Plank holds (supporting body with elbows and toes facing towards the ground)
• V-Ups (sitting and bringing arms and legs up at the same time)
• Alternate leg and arm V-Ups
• Supermans (body facing down, supported by the mid section, legs and arms
off the ground)

389
C h a p t e r 1 6
Recommended Upper Body Exercises
• Shoulder dips
• Dips into a handstand (use spotters)
• Full arm extension pull-ups on a horizontal bar
• Pull-ups to a front support position on a horizontal bar
• Rope climbing using only the arms
• Rope climbing upside down
• Handstand push-ups
• Push-ups using various arm positions (narrow, wide, normal, front/back)
Speed Development
To develop speed and power on the runway, vaulters must do sprint work with and
without the pole.
• Sprint drills: 1–3 x 20m, 3 days a week
• High knees
• Butt kicks (bringing heel straight up to lower rear)
• Power skipping
• Bounding
• Fast hands/quick feet
• Acceleration sprints: six x 60m, two times a week
• Repeat 300s and 200s: 2–4 reps, one or two days a week during the general
conditioning cycle applying proper running technique (70%)
• Repeat 150s: 3–5, one or two days a week, emphasizing relaxation, good stride
rhythm and running form
• Repeat 100s: 4–6, one or two days a week (should be faster
than the 150s)
• Repeat 50s or 60s: 5–7, one day a week, emphasizing relaxation, good sprint form
and acceleration

390
C h a p t e r 1 6
Weight Training
Weight training should be stressed during the off-season and preseason more than dur-
ing the competitive phase of the season. When there is an increase in the number of
strength development exercises in training (pull-ups, push-ups, plyometrics and gym-
nastics), there must be a proportionate reduction in the amount of weight training.
Recommended Weight Training Exercises
• Power cleans
• Incline presses
• Squats (full range of motion to toe raised position)
• Leg curls
• Leg extensions
• Seated arm curls
• Lunges
• Step ups
Important!
• Never lift free weights without spotters.
• Start with light weights and do not progress to heavier weights until proper lifting
techniques have been learned.
• Develop lower body strength with weight training and plyometrics, and upper body
strength with weight training and gymnastics.
Gymnastics
Any work on gymnastic apparatus helps develop upper body strength, body awareness
(kinesthetic sense), rhythm and coordination for pole vaulters. The high bar, rings,
and tumbling are especially beneficial.
Vaulting Drills
Drills are the major components of technique development and specific conditioning
for the pole vault. The coach should understand the purpose of each of the following
drills and how they should be incorporated into a training program.

391
C h a p t e r 1 6
Drills to Develop the Approach
• Approach Runs. Mark athletes' approach distances on the track and have vaulters
plant the pole into a towel or sliding box. Use check marks, as previously discussed.
Emphasize consistency, good speed, acceleration during the last strides into the
takeoff and the timing of the plant.
• Pole Runs. Develop the pole carry and speed by doing reps of 50–70m with the
vaulting pole. It is important to shorten distance if the athlete cannot accomplish
the task with good technique.
• Resistance Running. Develop power by doing reps of 30–40m uphill or pulling a sled.
• Speed-Assisted Training. Enhance speed and stride frequency by doing reps of 30–
50m with towing or a gradual downhill with and without the pole.
Drills to Develop the Pole Plant and Takeoff
• Plant and Hang. To develop the plant/takeoff rhythm, have the vaulter take a four-
stride approach, plant, and takeoff into the landing pit, so the pole reaches the
vertical position.
• Pop-Ups. To develop the complete vault rhythm, have the vaulter plant, swing to
vertical, pull-turn and push, and land in the pit on the back. Use a narrow grip and
a grip height that is 12–18 inches over the vaulter’s reach height.
• Sand Vaults. To develop an early takeoff position, dig a hole 12–18 inches deep in
long jump pit. Have the vaulter use a narrow grip and grip the pole at a height 18
inches above the reach height. Using a four-stride approach, perform the plant/
takeoff so the pole reaches a vertical position. Keep the upper body behind the pole
and the legs down. Emphasize taking off just before the pole reaches the bottom of
the hole. Gradually increase the grip height when the vaulter is easily penetrating
past the vertical.
• European Pop-Ups. With the pole in the box, have the vaulter take a high grip on
a stiff pole, mark the takeoff point, and then move three strides back. Perform a
powerful three-stride approach, plant and takeoff.
Emphasize the following:
• Strong plant placing the pole above the head
• An early, aggressive takeoff
• Good plant/takeoff rhythm

392
C h a p t e r 1 6
• Keeping the shoulders square to the pit
• Full extension of the arms and shoulders
The vaulter must maintain control and rebound safely to the runway in a balanced
standing position.
• Towel drill. Have the vaulter perform the run/plant/takeoff sequence from an approach
of three, six, eight and 10 strides. Plant the pole into a towel, movable box or inner tube
filled with five pounds of sand. The takeoff action slides the box forward.
• Penetration drill. To develop confidence in the plant, have the vaulter plant the pole
firmly, aiming forward and upward, using a short- or medium-length approach with a
gradually increasing grip height. The pole should not be overbent as the drill concen-
trates only on the lift and the takeoff. No attempt should be made to rock back.
Drills to Develop the Takeoff
• Double-leg hops over 6–10 low hurdles, 24–36 inches high placed three feet apart.
• Hurdling over five to seven low hurdles, five to seven yards apart. Have the athlete
take a six- to eight-stride run-up and perform a long takeoff to the hurdle and three
quick strides in between.
• Sets of 10 bounds over a fixed distance (20–30 meters) with emphasis on power
and speed.
• Rope swings using a four-stride approach and taking off forward into a hang.
Emphasize an upward and forward drive, transitioning into the swing.
Drills to Develop the Swing and Turn
The objective of the swing and turn is to move the body into position to clear the bar
at the greatest height possible above the top hand grip.
• Hanging from a horizontal bar, the vaulter performs a turn around the shoulder
axis, turns, and leaves the bar, landing safely on a matt facing the bar.
• Hanging from a horizontal bar, the vaulter turns upside down without bending the
arms. Straight legs make the drill more difficult.
• Hanging from a horizontal bar, the vaulter performs the previous drill with the knees
tucked to the chest, turning upside down and extending the legs to a rigid position.

393
C h a p t e r 1 6
• Jumping to grip a horizontal bar, the vaulter swings up and then performs a
coordinated pull, turn, and push action. The legs and hips are then extended to
clear a crossbar that’s set slightly higher than the horizontal bar.
• While holding a climbing rope, the vaulter takes off from a four- to five-stride
approach, catches the rope with a narrow grip and then swings on the rope. After
reaching the upside-down position, the vaulter pulls, turns, and pushes to clear a
crossbar, landing safely in a foam pit on the back.
• With feet attached to one end of a rope running over a pulley, the vaulter holds
the other end of the rope in the hands. He or she turns upside down, pulling and
pushing the hands toward the ground as he or she shoots the legs upward.
Vault Training
Vault training includes three types of vaults: technique, endurance and performance.
Technique vaulting seeks to develop the specific skills in the vault. For example, one
session might focus solely on developing a good plant phase. Endurance vaulting
stresses consistent performance over a number of jumps. Performance vaulting aims
for the greatest heights possible. Run these sessions similar to a competition. Focus on
one type of jumping in each vaulting session.
Tactics and Strategy for Competition
Athletes need to be well educated in the rules of the event to make tactical decisions
during competition. For example, the procedure used for breaking first-place ties in
the pole vault will often dictate the heights a vaulter will attempt or pass in the final
stages of a competition. The goal in any competition is to win or place as high as pos-
sible. The next objective should be to set a personal best or simply perform well.
Before the Meet
Become familiar with the pole vault facilities at away-meet sites so the coach can tai-
lor the vaulters’ approaches during the preceding week. The details of pole selection,
height of the hand grip, length of the approach run, and placement of check marks
should all be worked out in advance of the meet.
Mental Preparation
Pre-meet anxiety can greatly inhibit performance. This nonproductive emotion can

394
C h a p t e r 1 6
leave an athlete drained when it comes time to vault. Athletes must learn to keep this
nervous energy under control and in reserve for competition. The best way to accom-
plish this is to teach athletes simple relaxation techniques and positive visualization
skills. All successful athletes see themselves succeeding, and all athletes must believe in
themselves to have a chance to succeed.
While apprehension can cause an athlete to tighten up, run slower and perform with
poor technique, the positive flow of nervous energy can increase a vaulter’s running
speed, alter the acceleration pattern and equally disrupt the approach. Both situations
require adjustments in grip height, pole size and approach length. Maintaining one’s
composure during competition is important. The pole vault is an event that requires
continual adjustments and decision making.
Determining Opening Heights
A coach should use athletes' warm-up vaults to determine the height at which they
should enter the competition. If an athlete is jumping well in warm-ups, three height
progressions or 18 inches below the personal best is usually a good opening height.
If an athlete is struggling during the warm-up vaults, a coach may have that vaulter
open at a lower height in order to work out problems early in the competition.
If the opening height is higher than the athlete is accustomed to, have the athlete
work his or her way up to that height during the warm-up vaults. This will bolster
confidence when the competition begins. The biggest tactical error made by begin-
ning and intermediate pole vaulters is entering the competition at heights they cannot
clear on the first attempt! With one or two misses, any psychological or tactical edge
over one’s opponents is reversed and the stage is set for disaster!
Determining Height Progressions
In most high school pole vault competitions, the bar is raised by increments of six
inches until three or four vaulters remain. The bar is then raised by increments of
three or four inches until two or three competitors remain. Those vaulters then deter-
mine the remaining heights to be attempted.
In league and section qualifying meets, it is important to anticipate what height will
enable the athlete to advance. This mark will only vary slightly from year to year. In a
qualifying competition, a coach should keep track of the competitors remaining and

395
C h a p t e r 1 6
how they have performed at lower heights to determine what incremental clearance
will be needed for a vaulter to qualify for the finals.
DETERMINE STANDARD SETTINGS
The pole vault standards are the two devices on either side of the pole vault pit which
support the crossbar and can be adjusted in relation to the depth of the bar to the
plant box. The position directly on top of the back of the plant box is “0.” Standard
settings in high school can be set between 15.5” (40 cm.) from the back of the box to
31.5” (80 cm.). It is a common belief among top coaches that the standards should
be set as far back as legally possible. This distance allows for maximum performance
and safety. Standards should be moved forward in rare instances. In order to ensure
maximum performance and safety, adjustments should be made with running dis-
tance, technique, pole size and pole grip, not in the standard settings.
A Training Periodization Plan for the Season
Given the skill development, strength, agility, and speed required for the pole vault, it
is recommended a minimum of two to three hours per week be devoted to practicing
proper technique. The volume and intensity levels recommended have been carefully
planned to aid the athlete’s progress.
Selecting the interval between repetition runs and the various ways in which these
runs are used will allow the coach or the vaulter to individualize this program. For
example, shorter or longer intervals (rest periods) will make training more or less
intense. Running further, over hills, and with or without the pole are other ways of
individualizing training.
MON TUE WED THU FRI SAT-SUN
Warm-Up Warm-Up Warm-Up Warm-Up Warm-Up Rest
2 x 250m Drills 4 x 150m Drills 4 x 150m
3 x 100m Wt Training 5 x 70m Wt Training 5 x 70m
Warm-Down Warm-Down Warm-Down
OBJECTIVE: Conditioning, strength, and technique enhancement.
TRAINING NOTES: All running workouts are at 50% intensity.
F ebruary - preseason ( mini - cycle # 1 )
P reseason M ini - C ycles

396
C h a p t e r 1 6
Warm-Up Warm-Up Warm-Up Compete Warm-Up Compete
Vaulting Drills 1 x 150m Drills
1 x 150m 4 x 100m 4 x 50m 5 x 100m
3 x 100m 3 x 50m Warm-Down Wt Training
Warm-Down Wt Training
OBJECTIVE: Reduce training volume, increase intensity, and sharpen for competition.
TRAINING NOTES: All running workouts are at 83.4% intensity.
april - mid - season ( mini - cycle # 3 )
Warm-Up Warm-Up Warm-Up Compete Warm-Up Compete
Vaulting Drills 2 x 150m or Drills
3 x 150m 3 x 100m or 4 x 50m 3 x 150m Rest
Warm-Down Wt Training Warm-Down Warm-Down
OBJECTIVE: Refine technique and prepare for major competitions.
TRAINING NOTES: All running workouts are at 99.5-100% intensity.
may - late season ( mini - cycle # 4 )
P reseason M ini - C ycles ( cont )
Warm-Up Warm-Up Warm-Up Compete Warm-Up Warm-Up
Vaulting Drills 4 x 150m Drills 4 x 150m
2 x 150m 6 x 100m 4 x 50m 1 x 150m 5 x 70m
Warm-Down Wt Training Warm-Down 3 x 100m Warm-Down
Wt Training
OBJECTIVE: Maintaining training volume through competition.
TRAINING NOTES: All running workouts are at 66.6% intensity.
march - early season ( mini - cycle # 2 )

397
C h a p t e r 1 6
Sequence (Indicate order by 1-15) Date:
Time
_____ _____ p Running Warm-Up
_____ _____ p Flexibility
_____ _____ p Mobility _____ p Sprint Drills _____ p Acceleration Sprints
_____ _____ p Vault Drills (indicate order by A-L)
_____ p Plant Drills _____ p Plant Hang _____ p Horizontal Bar
_____ p Pop-Ups _____ p Sand Vault _____ p Coach's Pop-Up
_____ p Approach Runs _____ p Rope Vault _____ p Towel Drill
_____ p Penetration Drill _____ p Rope Swing _____ p Rope Pulley
_____ _____ p Technique Vaulting _____x_____ _____x_____ _____x_____
_____x_____ _____x_____ _____x_____
_____ _____ p Endurance Vaulting _____x_____ _____x_____ _____x_____
_____x_____ _____x_____ _____x_____
_____ _____ p Performance Vaulting _____x_____ _____x_____ _____x_____
_____x_____ _____x_____ _____x_____
_____ _____ p Running Workout _____x_____ _____x_____ _____x_____
_____x_____ _____x_____ _____x_____
p Repeats p Approach Runs p Pole Runs p Resistance Running
_____x_____ _____x_____ _____x_____ _____x_____ _____x_____
_____x_____ _____x_____ _____x_____ p Speed-Assisted Training
_____x_____ _____x_____ _____x_____
_____x_____

_____ _____ p Gymnastics p High Bar _____ p Floor Exercises
p Rings _____ p Trampoline
_____ _____ p Weightlifting
p Clean p Squats p Bench Press
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
p Arm Curls p Leg Curls p Leg Extensions
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____ _____ Other p _______________ p _______________ p _______________
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____ _____ p Warm-Down
Notes:
pole vaulters training script
P lanning aids for developing A training system

398
C h a p t e r 1 6
3Sequence (Indicate order by 1-15) Date:
Time
_____ _____ p Running Warm-Up
_____ _____ p Flexibility
_____ _____ p Mobility _____ p Sprint Drills _____ p Acceleration Sprints
_____ _____ p Vault Drills (indicate order by A-L)
_____ p Plant Drills _____ p Plant Hang _____ p Horizontal Bar
_____ p Pop-Ups _____ p Sand Vault _____ p Coach's Pop-Up
_____ p Approach Runs _____ p Rope Vault _____ p Towel Drill
_____ p Penetration Drill _____ p Rope Swing _____ p Rope Pulley
_____ _____ p Technique Vaulting _____x_____ _____x_____ _____x_____
_____x_____ _____x_____ _____x_____
_____ _____ p Endurance Vaulting _____x_____ _____x_____ _____x_____
_____x_____ _____x_____ _____x_____
_____ _____ p Performance Vaulting _____x_____ _____x_____ _____x_____
_____x_____ _____x_____ _____x_____
_____ _____ p Running Workout _____x_____ _____x_____ _____x_____
_____x_____ _____x_____ _____x_____
p Repeats p Approach Runs p Pole Runs p Resistance Running
_____x_____ _____x_____ _____x_____ _____x_____ _____x_____
_____x_____ _____x_____ _____x_____ p Speed-Assisted Training
_____x_____ _____x_____ _____x_____
_____x_____

_____ _____ p Gymnastics p High Bar _____ p Floor Exercises
p Rings _____ p Trampoline
_____ _____ p Weightlifting
p Clean p Squats p Bench Press
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
p Arm Curls p Leg Curls p Leg Extensions
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____ _____ Other p _______________ p _______________ p _______________
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____x_____ @ _____ _____x_____ @ _____ _____x_____ @ _____
_____ _____ p Warm-Down
Notes:
S A M P L E pole vaulters training script
3
May 3
3
3 3
3
3
3
3
3
3
3
5:00 1
5:00 2
10:00 3
30:00 4
30:00 5
5:00 6
5:00 7
B
C
A
3 11' 3 12'
3 11'6 3 11'6
2 150m

399
17
C h a p t e r
Training Shot Putters and Discus Throwers
The shot put and discus throw are the strength events of track and
field. More than any other events, the shot put and discus rely on the
direct application of power.
In physics, power is defined as work divided by time. In other words,
if an athlete does more work in the same amount of time, power out-
put increases. Likewise, if an athlete does the same amount of work
in less time, then power output also is increased. In both throwing
events, power is the critical component.
The shot put is usually considered a pushing event while the discus is
regarded as a slinging event. Because both the shot put and discus throws
require athletes to generate and effectively apply great power, they are
arguably the most technically complex events in track and field.

400
C h a p t e r 1 7
A Philosophy for Coaching Throws
The shot put and discus, commonly called the throws in high school track and field,
are intricate and complex events requiring great power. Unlike what happens in other
events, throwers either spin or move backward (i.e. glide) in order to create power and
propel the implement into a defined area. These multiple demands require throwers
to possess a wide range of athletic skills: explosiveness, strength, balance, coordina-
tion, timing, kinesthetic awareness, concentration and the ability to relax while exert-
ing maximum effort. Training for the throwing events involves a great deal of techni-
cal work, weightlifting, running and plyometrics.
Often, coaches shuttle their least-able athletes into the throwing events. This is a
mistake. In fact, the throws are significantly more demanding than most other field
events. Though the shot put and discus do not require tremendous aerobic condition-
ing or blazing sprint speed, they require numerous dynamic skills to be performed in
concert. High school throwers should be good athletes to start. Less fit or less mature
athletes should begin in other events, where their athletic capacity can be developed
and rewarded.
As with the other track events, throwers should be trained to be athletes first. For the
beginning thrower, the entire season will be a learning experience emphasizing general
fitness and technical improvement. Strength, coordination, balance and fundamental
technique should be the focus of training. For the experienced thrower, the focus is on
rhythm and explosiveness blended with refined technique.
Safety Considerations in Events
The primary consideration in coaching the throwing events is safety. Before any
throwing or training occurs, a discussion of safety for both throwing and weight train-
ing is crucial for all athletes on the team, not just the throwers.
The landing area for the throwing areas should be flagged off (this would include a safe-
ty “buffer” zone outside the sector lines), a safety cage should surround the throwing rings
and a fence should guard the end of the throwing area to stop the shot or discus from
escaping and causing injury.
Shots and discus should not be rolled back to the throwing area; they should be
carried back to avoid injuries. Athletes and coaches who are not throwing should

401
C h a p t e r 1 7
stand behind the caged throwing area to avoid being hit by a stray implement.
Coaches should always take caution! Both the shot and discus become dangerous and
potentially lethal once in flight.
When dealing with groups of throwers, make sure the athletes know how to retrieve
implements. NEVER allow an athlete to retrieve an implement when there is another
athlete in the ring. In addition, no athlete (or coach, or spectator, or official!) should
ever turn his or her back to an active ring. Errant throws are impossible to predict.
One way to make a throwing sector a little safer when dealing with large groups is to
have athletes throw in groups of three, four, or five where one group is designated as
the throwing group, the other is the retrieving group, and other groups can be doing
drills in a designated safe area. Each group gets a chance to go through two rounds of
throws then all groups rotate places.
Ultimately safety is the responsibility of EVERYONE in the throwing area. One
moment of inattention can lead to a tragedy.
Principles of Training
As with all other track and field events the universal principles of training apply to the throws.
In order for the physical capacity of the athlete to increase, the athlete's system must
be subjected to stress or overload. The body, then, adapts to that stress, which results
in increased capacity. This cycle of stress and adaptation is the foundation of training.
It is also known as the SAID principle, the specific adaptation to imposed demands.
Specificity
The body adapts to specific demands placed upon it. Therefore, training for the
throws must specifically address the requirements, strengths and skills needed for
those events.
Repetition
This principle is an outgrowth of the specificity requirement. Especially with a tech-
nical event, the neuromuscular patterns of technique must be reinforced through
repetition of movement. This usually entails isolating the throwing process into com-
ponents and performing them repeatedly with sound technique. Drill repetitions are
the heart of throw training.

402
C h a p t e r 1 7
Recovery
the applied stress. Throwers cannot throw and weight train every day and expect to
perform explosively in competition.
Individuality
Respecting the principle of individuality is most important to the coach of high
school throwers. Differences in physical maturity and strength are great among high
school athletes. Coaches should not expect less mature athletes to do the same volume
of work that is demanded from upperclassmen.
In addition, there are principles of training that are specific to the throwing events.
Rotational Acceleration
Both the shot put and the discus throw use the rotation of the body to accelerate
the implement to its point of release. Even the conventional glide technique of shot
putting uses the rotation of the hips, trunk, shoulders and free arm to drive the shot
outward. A coach must understand the mechanics of rotary motion and inertia to
properly train his or her athletes.
Balance
Balance is essential to good execution in the throws. The athlete needs to maintain
balance in order to apply power effectively. This fact is especially true for the shot
put spin technique as well as the discus. Without balance, the application of power is
negated. Think of the throwing events as dances of explosive effort.
Rhythm
Rhythm is essential to the proper acceleration of the weighted implement in the throw-
ing events. Just as in the jumps, rhythm provides a framework for the application of
power; furthermore, just as dancers are graceful and fluid, so must throwers be too.
Body Control
Throwers need to possess excellent kinesthetic awareness. In the discus, for example,
the body moves forward, backward, spins and is airborne all at the same time.
Throwers must develop the capacity to sense and control their body positions while
moving powerfully.

403
C h a p t e r 1 7
Relaxation
Throwers must be able to relax while exerting absolute effort. The throwing events
require the greatest single exertion of power, yet are completed in the briefest amount
of time of any track and field event. The complicated sequence of execution in both
throws demands relaxed effort. Lack of relaxation keeps the athlete from achieving the
necessary positions from which to apply power. Intensity is not the same as tension.
The Mechanics of Throws
The aim of both the shot put and discus throw is to propel the implement as far as
possible to land within the designated sector. Quite simply, the distance covered by
any projectile is a function of five factors:
1. The implement’s speed at release
2. The angle of release
3. The height of of the implement at release (relative to the landing area)
4. The angle of attack (the difference between the angle of release and the discus’
horizontal axis)
5. Atmospheric conditions (including humidity, wind, temperature etc.)
The most influential of these five factors for most throwers is “speed of release.” The
angle of release is easily adjusted by the thrower. The height of release is largely lim-
ited by the stature of the athlete and may vary only a few inches. The angle of attack
is critical to discus throwers, but throwing a “flat” discus (and not a “full moon”) is
quite easily corrected, even in beginning throwers. And, finally, atmospheric condi-
tions are completely out of the control of the thrower, so that is not as much of a con-
cern as a coaching point.
Coaching the throws boils down to understanding how to best optimize the angle
and height of release while maximizing the speed of release. Every drill and repetition
should have this as its ultimate goal. Contradictory as it may seem, this doesn’t mean
that every drill, throw or exercise needs to be done fast because, “Sometimes you have
to slow down now to speed up later!”
Acceleration of the shot or discus results from the application of horizontal, vertical
and rotational force of the body to the ground and the implement.

404
C h a p t e r 1 7
In the glide shot put style, a combination of horizontal and vertical force accelerates
the body from the back to the front of the throwing circle. As the thrower lands in
the middle position, the legs drive forward and up and the hips and torso rotate to
the front of the circle. Simultaneously, the throwing arm further accelerates the shot
as it pushes away from the body. The spin shot put style adds horizontal rotation at
the beginning of the throw in order to create greater velocity at the point of release.
In the discus throw, the thrower attempts to perform a long acceleration of the imple-
ment by applying rotational and linear horizontal force at the rear of the throwing
circle. When the thrower reaches the power position, vertical force is also applied to
create an optimum angle of release. As the hips turn to the front, the free arm pulls in
to shorten the axis of rotation and the front leg blocks. This transfer of momentum
further accelerates the throwing arm. The final acceleration of the discus results from
the pull of the throwing arm through the point of release.
The optimum angle of release for the shot put is roughly 40-degrees, depending on
the height of the release. For the discus throw, the best angle of release varies between
34- and 40-degrees depending on the wind and height of release. The angle of attack
(the difference between the angle of release and the discus’ horizontal axis) should be
5- to 10-degrees. Distance is also aided by the construction of the discus itself. A hol-
low discus with weight distributed away from the center will hold its spin better and
increase the aerodynamic stability of the implement.
Understanding the Techniques
SHOT PUT TECHNIQUE
The two most common techniques of shot putting are the glide and the spin. The
glide technique is an easier technique for high school athetes to learn, but the spin
technique may have more advantages for certain athletes.
Smaller throwers may benefit from the spin technique, which compensates for the lack of
long levers with superior speed generated by the spinning motion. Throwers who are
adept at pivoting or spinning may be candidates for the spin technique; however, for
high school throwers, the glide is a more consistent technique.
The glide technique is usually favored by larger throwers who have trouble spinning
within the small shot circle. They also benefit from the longer pull gained from the

405
C h a p t e r 1 7
power position of the glide technique. Long throws have been achieved with both
styles, but all beginning throwers should learn a little about the glide before even
attempting the spin. This is so a young thrower can learn and understand the concept
of the proper power position.
Note: Discussion of all technique refers to right-handed throwers.
The Glide
Standing at the rear of the ring with his or her back to the throwing area, the glide
begins with the thrower's weight solidly over the right foot (the toes of the right
foot are pointed directly opposite of the landing area) and the left arm dangling and
relaxed (see Figs. 15-1 and 2). Just before the left leg is to be driven toward the board,
the athlete should lean backwards and start to gently fall back into the ring. This pro-
cedure is called unseating and provides momentum for the shift across the ring.
The left leg is extended, or actually driven, towards the toe board, and should not be
lifted too far off the ground as it extends (see Fig. 15-3).
The upper body should remain closed ("closed" refers to the position of the thrower’s
glide shot put positions
Fig. 15-1. Fig. 15-2. Fig. 15-3. Fig. 15-4.
Fig. 15-5. Fig. 15-6. Fig. 15-7. Fig. 15-8. Fig. 15-9.

406
C h a p t e r 1 7
shoulders, which should be square to the rear of the ring, with the thrower’s back fac-
ing the throwing sector), and the left hand should reach back towards the rear of the
circle. While the left leg is driving toward the toe board, the right leg extends as well,
so a split position is attained. The split position will look like the thrower is actually
trying to perform the splits (see Fig. 15-4).
Immediately after the split position is hit, the right foot is pulled underneath the body
as it turns 90-degrees counter-clockwise. The shoulders remain closed,with the throw-
er’s back still facing the throwing area.
When the right foot is fully recovered beneath the upper body, the center of mass
should be over the ball of the right foot. The center of mass is then immediately
shifted forward onto the left leg to generate more linear momentum (see Fig. 15-5).
This completes the glide phase of the throw. The position of the thrower should at
this point resemble that of the start of a stand-throw.
From the stand-throw position, the thrower drives up with the right leg and begins
to shift the body weight forward onto the left leg. At this point, timing between the
upper and lower body is essential to ensure the body weight is not shifted forward too
soon, causing a low line-drive throw. If the body weight is shifted forward too late, a
higher throw with little linear momentum will result (see Fig. 15-6).
Before continuing, one note should be made about the action of the right foot as the
thrower moves from the glide phase to the throwing phase. As the right foot is recov-
ered underneath the upper body, the thrower should spend as little time as possible in
transition to the throwing phase. Body weight should be shifted off the right foot as
soon as it hits the ground beneath the upper body. When the transition is done prop-
erly, the only part of the right foot that touches the ground is the ball of the foot.
The upper body will begin opening up at this stage, in preparation for the arm strike
at the end of the throw. This happens in conjunction with the legs driving the center of
mass up and across the ring. This portion of the throw should receive the most attention
and involves complex body coordination that requires many hours of practice.
As the shot is thrown, the concept of extension should be practiced. The shot will be
pushed outward as the center of the mass is shifted from the right to the left foot. At
the same time, the legs extend upward to lift the shot. This leg extension is coupled

407
C h a p t e r 1 7
with the extension of the throwing arm. The position reached when the shot is deliv-
ered by the arm is called the power position. It should be noted that when the shot is
being released, the head should be thrown back to allow an upward delivery—at this
point the thrower’s entire body will resemble the shape of the letter “C” after it has
been turned inside out—throwers refer to this position as the “inverted C.” (see Figs.
15-7 and 8.)
A follow-through, called the reverse, is applied to the end of the throw. This allows
for a long pull while avoiding fouling. The athlete should not watch the shot as he
or she reverses but, rather, look off to the side of the sector. Watching the shot usu-
ally causes the center of mass to move out of the front of the ring, resulting in a foul
throw (see Fig. 15-9).
The left foot is forced out of its position next to the toe board and is replaced with
the right foot, which should land flat to ensure better balance. The right arm which
has been extended to throw the shot should immediately be brought back over the
top of the body to a position pointing to the center of the ring.
The Spin
Compared to the glide, the spin technique allows for longer acceleration of the shot
before the power position is reached. However, this technique is more intricate than
the glide and requires the thrower to spin 1¼ times around within a 7-foot circle
before the shot is released. While it is true this style can produce some very long
throws, it is sometimes harder for the beginner to master.
The spin (or rotational) technique begins with the thrower balancing his or her
weight on both feet in the rear of the ring with the back to the landing area. The shot
may be held a little higher on the cheek for the spinner. This allows the hand to release
the shot easier.
As the thrower initiates the spin, there should be a shift of weight from the right foot
over to the left foot. The center of mass should be directly over the ball of the left foot
to allow a smooth pivot as the thrower turns in the back of the ring (see Figs. 15-10
and 15-11).
While pivoting, the thrower should be looking straight ahead, not at the ground.
Once the thrower has completed the first 90-degrees of the turn, the right foot sweeps

408
C h a p t e r 1 7
outside of the ring and then drives forward toward the right sector line.
The beginning thrower will want to drive his or her right leg toward the center of the
ring, but this is incorrect. Rotational forces must be taken into account. As the right
leg drives toward the right sector line, the pivoting action will cause the right leg to
move to the left as it is driven out. If the right leg is driven toward the center of the
ring, rotational forces will cause it to land far to the left of center of the shot ring.
The right leg must compensate for the rotational forces pulling the thrower around.
A second component of the initiation from the back of the ring is the push of the
left leg. The left leg thrust across the ring, coupled with the right leg drive toward
the right sector line, causes the thrower to move across the ring. When the right foot
lands in the center of the ring, it should begin pivoting immediately.
This is a hard task for beginners because it requires good balance on the ball of the
right foot as it makes contact with the ground. While the right foot pivots, the left
foot should be picked up and set down against the toe board. The toe of the left foot
should align roughly with the heel of the right foot. As the left foot makes contact
spin shot put positions
Fig. 15-10. Fig. 15-11. Fig. 15-12. Fig. 15-13.
Fig. 15-14. Fig. 15-15. Fig. 15-16. Fig. 15-17

409
C h a p t e r 1 7
with the ground, the center of mass should still be balanced over the ball of the right
foot, with the shoulders closed to the front. This position should resemble the begin-
ning of the stand-throw (See Figs. 15-12 to 17).
From the time the left foot pushes off the ground to when it is set down by the toe
board, the right foot should continue to pivot. Once the stand-throw position is
reached, the hips begin to rotate along with the right foot. Simultaneously, the right
leg begins to extend, or straighten. This causes the body to corkscrew. As the body
sets to shift weight from the right leg to the left leg, the shoulders start to open up.
The final phase of the spin technique involves the release and the reverse. When the
center of mass is shifted forward over the block leg (i.e., the left leg), the hips and
shoulders pivot around until the shoulders are square to the throwing area. The release
of the shot is followed by a reverse similar to the steps described at the end of the
glide technique (see Fig. 15-9). Throwers will find it easier to reverse at the end of the
spin because they already possess quite a bit of rotational momentum. On the other
hand, it is easier to pull away or spin out from the finish of a throw, making the spin
a more inconsistent technique for beginners.
Coach’s Viewing Angles
When watching the shot put, a coach should view from three different angles: from
the back of the shot ring, from the side of the ring facing the throwing arm of the
shot putter and from the front of the ring. Each viewing angle allows the coach to
evaluate different components of the overall throw.
The view from the rear of the ring provides a good look at the line of power estab-
lished as the thrower glides or drives across the ring. This view is also ideal for seeing
if the shoulders are open or closed as the thrower hits the middle of the ring.
Viewing from the side of the shot ring is the most common position used by coach-
es. This view gives a good look at the left leg drive to the board and the push off of
the right leg out of the back of the ring. The opening of the shoulders and length of
pull on the shot can also be seen well from this angle.
Watching the throw from the front of the ring provides a different view of the
opening of the shoulders and the left leg drive to the front of the ring. This angle
allows the coach to see how well the thrower squares up to the throw or if the spin-

410
C h a p t e r 1 7
ner over-rotates out of the back.
The choice of angles from which to view depends on the particular skills the thrower
is perfecting and the coach’s preference.
DISCUS THROW TECHNIQUE
The primary body movements of discus technique are essentially the same as the
rotational technique for the shot put. The ideal athlete for discus throwing is tall with
long arms and legs and quick feet. Successful discus throwers have come in all shapes
and sizes, but this body-type seems to have the most success in the event.
The complete discus throw should have a distinct rhythm, building from slow to fast.
The discus thrower should start in the back of the ring with a nice, relaxed wind of
the discus to start the rhythm as the weight stays evenly distributed over both feet (see
Figs. 15-20 and 21). The wind should not be too fast or dramatic.
As the thrower “unwinds,” the legs should bend and the center of mass should be
discus techni q ue positions
Fig. 15-20. Fig. 15-21. Fig. 15-22. Fig. 15-23. Fig. 15-24.
Fig. 15-25. Fig. 15-26. Fig. 15-27. Fig. 15-28.

411
C h a p t e r 1 7
shifted over the ball of the left foot (see Fig. 15-22). The shoulders should remain
parallel to the ground with the left arm extended straight in front of the body.
As the center of mass moves over the left foot, the thrower should drive off that foot
immediately. This movement is referred to as drop and go. As the left foot pushes,
the right foot sweeps around underneath the left armpit and the thrower rotates out
of the back of the ring (Fig. 15-23). The combination of the left leg drive and the
right leg sweep gives the thrower good linear impulse across the ring.
Hip-shoulder separation is also established at this point, as the right leg sweeps under-
neath the armpit to get ahead of the upper body. The head should look straight away
from the chest, as the discus is wound, and then turned to look at the left arm as the
thrower comes out of the back of the ring.
Once linear drive has been established across the ring, the thrower should actually be
airborne. At this point, the right leg will be tucked in, beneath the upper body, and
the knees brought together to increase the speed of the left foot coming back to the
ground. After the initial drive out of the back, the right leg will be the first to contact
the ground at the center of the ring (see Fig. 15-24). The left leg should touch down
as soon after the right as possible to create the longest arm pull possible on the discus
(see Fig. 15-25).
As the thrower reaches the stand-throw position, the shoulders should remain paral-
lel to the ground with no dipping whatsoever. The right foot should also continue to
pivot and should continue to do so until the discus is released.
When the athlete is pulling the discus around to the release point, the right foot must
continue to pivot in order to maintain the hip-shoulder separation attained at the
initial turn (see Fig. 15-26). If separation is not maintained, an arm throw will result
— and much power lost. The discus throw is actually a sling, aided by a stretch-reflex
reaction prior to release. The left side of the body should remain firm, with the left
leg (the block leg) blocking as the right side rotates through release. At release, the
head should be thrown back allowing the chest and hip to rise and give lift to the dis-
cus (see Fig. 15-27). After the discus is released, a reverse can be added to avoid foul-
ing (see Fig. 15-28).

412
C h a p t e r 1 7
Viewing Angles for the Discus
The same angles should be used for watching the spin shot put and the discus. The
side view provides a good look at the arm strike, as well as a good look at the hip
drive during the release. This is also the best view to see the linear drive generated out
of the back of the ring. Viewing from the back and front of the ring, a coach can see
if the athlete over- or under-rotates when leaving the back of the circle. This view is
also ideal to see if the shoulders are open or closed as the thrower reaches the front of
the ring and whether the shoulders become square to the throw.
Introducing the Throws to Beginners
Teaching the Shot Put
The difference in technique training between beginners and experienced throwers
is substantial. Advanced throwers should use the preseason to refine weak aspects of
their technique and reinforce sound fundamentals.
Beginning throwers need to learn the basics of throwing the shot. A simple teaching pro-
gression follows. Each step should be mastered before the next step is undertaken.
• The beginning thrower first needs to learn the proper manner in which to hold the
shot. The shot should be balanced on the hand between the fingers and the palm.
• The athlete stands in the shot ring facing the throwing area with the toes of both
feet touching the toeboard. The thrower places the shot under the jaw with the
elbow up away from the body. Many young throwers will let the shot fall into their
palm when they try to place it under their jaw. It is important to correct this flaw
immediately. The athlete then pushes the shot straight out from the body into the
landing area.
• After the athlete is comfortable releasing the shot, the thrower repeats the same
steps, but this time before he or she throws, the athlete twists 90-degrees at the
waist in the direction of the throwing arm, so the upper body will unwind to gain
momentum.
• The same steps are repeated, but this time the legs should bend as the trunk is
twisted in the direction of the throwing arm. As the thrower initiates the turn of
the trunk back toward the landing area to begin the throw, the legs should straight-
en up to produce lift on the shot.

413
C h a p t e r 1 7
• Once this step is mastered, the thrower should take one step back with the right
foot. As he or she steps back the right foot will turn 90-degrees from the landing
area. The athlete then pivots the right foot toward the landing area and twists at the
waist to perform a regular stand-throw.
• From this point, the throwing drills described later can be used to develop either
the glide or the spin techniques.
Teaching the Discus Throw
• Have the athlete place the discus in the palm of his or her non-throwing hand with
the arm extended chest high. Have the athlete place the throwing hand flat on top
of the discuss and slide it forward until the last joint of each of the four fingers
slides over the edge and grips the discus. The fingers should be spread apart with
the thumb on top of the discus for control (see Fig. 15-30).
• To teach the proper release of the discus, have the thrower hold the discus with the
throwing arm at his or her side and the palm facing the leg. Using a bowling action,
have the thrower release the discus on its edge, so it will roll along the ground. The
thrower should feel the discus roll off each finger. This movement is similar to the
release of the throw. Make sure that the thrower keeps the arm straight and does not
cock, bend, or flex the wrist upon releasing the discus (see Fig. 15-31).
• Throwing the discus straight up in the air for height also helps teach the proper
release of the discus. In this drill, the thrower stands with the feet shoulder-width
apart and begins by tossing the discus a few feet overhead. Emphasize keeping the
arm and wrist absolutely straight, with the discus retaining a vertical position as it
is released. As skill in handling the discus improves, have the thrower toss it higher,
bending the wrist and knees to generate more power for throwing (see Fig. 15-32).
Fig. 15-30. Fig. 15-31. Fig. 15-32.
G ripping the discus

414
C h a p t e r 1 7
• The next step in the learning sequence is to demonstrate throwing the discus from
a standing position at the front of the circle. The athlete should stand at a 90-
degree angle from the landing area with the throwing arm facing the rear of the
ring. The left foot should be near the front of the ring and the toes of the left foot
lined up with heel of the right foot so there is a slightly opened stance. The discus
should be wound back, taking care not to cup the discus. Only the upper body
should be used to throw the discus at this stage. Concentrate on a proper release.
• Once the proper release is mastered, a full stand-throw can be attempted. The
stand-throw position for the discus is very similar to that of the shot put except the
throwing arm is relaxed, extended and wound back so the discus aligns over the left
heel. (see Fig. 15-11). Stand-throws should be done without a reverse until proper
timing is achieved.
• After the stand-throw becomes comfortable, the "half-turn" drill should be used
to give the thrower a sense of pivoting on the right foot and throwing. This drill
begins with the right foot placed in the middle of the discus ring with the left foot
at the back of the circle and the thrower facing the front of the ring. The thrower
then pivots 180-degrees on the ball of the right foot ending in the stand-throw
position. Once this position is reached, the athlete throws. Pay special attention to
completing the drill as one movement.
• The "step-in" drill begins with the athlete standing just outside the back of the ring
facing the landing area. The thrower’s left foot is placed just inside the back of the
ring. The thrower then steps with the right foot into the middle of the ring. Once
the right foot touches down, the rest of the drill follows the pattern of the half-turn
drill. Again, this drill should not be done in parts but, rather, as one movement.
• The "South African" drill is basically the same as the step-in drill, except there is
a stronger push off the left foot in the back of the ring, so a little more speed is
generated when traveling across the ring. This drill simulates the action of the full
throw without the first 90-degree turn at the back of the ring.
• The "360-degree turn" drill should be used to introduce the 180-degree turn out
of the back of the ring. This particular drill can be done either in or out of the ring
and involves a 360-degree pivot on the ball of the left foot. During this drill, the
shoulders should remain parallel, and the right leg should remaiin straight, sweep-
ing out away from the body to help the athlete maintain balance.
When this sequence of drills can be performed successfully, a full throw should be
attempted.

415
C h a p t e r 1 7
The Equipment
Throwing equipment, particularly the discus, is a source of great debate. Does a
school need to spend $300 for one boy’s discus? Will a $300 discus really fly signifi-
cantly farther than a $60 model? The answer is that the beginning to average high
school athlete will not see longer throws with a more expensive discus; however, an
elite high school thrower will see greater distance with the better discus. Each school
will formulate its own policy, but a general guideline to follow might be to not buy a
more expensive discus for a thrower until a male athlete has thrown consistently more
than 160’ or a female athlete has thrown more than 120’.
Discuses are rated (and often priced) according to their rim weight, that is, the per-
centage of the total weight of the implement that is located on the outer ring of the
discus. Too much rim weight (generally over 82%) will be very difficult for a begin-
ning athlete to release smoothly. A more important characteristic when looking at
discuses is the durability of the plates. Discuses have to survive years of high school
abuse, and the part that fails most often is the plate.
Stainless steel shots are nice but come with a hefty price and some athletes actually
find them too slippery. Cast iron or turned iron shots are perfectly fine for the vast
majority of throwers.
Occasionally, a coach may have an athlete with small hands who feels the iron and
stainless shots are too big. For these small athletes a coach might consider a brass shot
which has a smaller diameter. Brass shots are not recommended for most throwers as
their smaller size puts more pressure in a smaller spot on the hand (smaller diameter =
more PSI) and can lead to pain in the throwing hand.
However, each school should check the rules for its section and state regarding both
the size and type of shot allowed. In some cases, the governing body may provide a
shot for championship competition and not allow personal shots. This is important if
an athlete uses a smaller brass shot all year and then is required to throw a larger shot
in section or state competition.
Emotionally, an athlete may feel better about throwing expensive equipment and
believe that it will go farther, but if the expensive implement is flying farther for the
average athlete, it has more to do with the faith and comfort in the implement than
the implement itself.

416
C h a p t e r 1 7
Many shot putters like to use chalk (magnesium carbonate) to help them achieve a
good grip on their implement. In the discus, it is critically important the implement
and the athlete’s hands stay dry. Keep towels handy to keep the implements clean and
dry during meets and practices.
Methods of Training
Weight Training and Conditioning
Both beginners and more advanced throwers can use a similar approach to general
conditioning and weight training, although intensity will differ.
Weight training should concentrate on five basic lifts. First are the Olympic lifts
(clean, jerk, and snatch), which are the most important — and most neglected by
American high school coaches. The Olympic lifts are extremely important in build-
ing explosive strength in the athlete. The lifts are too often ignored in favor of the
power lifts, which don’t do much for explosion. The power clean and snatch simulate
aspects of the throws, requiring upper and lower body coordination. If a thrower has
to pick just one lift to do, it should be the snatch because it conditions the total body
and develops explosiveness. Second are the power lifts (bench press and squat). Other
supplementary lifts can be added to condition specific body parts, but these five core
lifts should take precedence.
Conditioning should also include running, plyometrics and medicine ball drills. Hill
runs or sprint repeats should be part of general conditioning. The plyometric exercises
can be found in Chapter 5.
The intensity of conditioning and weight training should be geared to the fitness level
of the athlete. Higher volume should be done early in the season and reduced as the
competitive season begins. Proper conditioning enhances performance and reduces
the risk of injury. When the thrower gains strength, he or she will find that good
technique will be easier along with greater control.
More advanced explanations of lifting techniques and workouts are included in the
strength training chapter of this manual.

417
C h a p t e r 1 7
COACHING GROUPS OF THROWERS
It may be a daunting proposition to have to teach 30 or more throwers of widely
varying ability levels at the same time. This problem is compounded by the fact that
most schools only have one or two rings for practice.
Throws coaches must be creative in their use of space and time. The key to coaching
a large number of throwers is the use of stations or areas where athletes can practice
a specific skill or drill. The more throwers a team has, the more stations that are
needed.
There can be stations for all the different drills including footwork, balance, release
points and position work. If there are six athletes per station, three athletes can drill
and three can be “teaching” and looking for cues. The activities at each station
should be short and simple in order to keep the athlete’s attention focused on the task
at hand.
It is important that the coach continue to move around to as many stations and
groups as possible; however, the coach must always be near and diligently supervising
the areas where throwing is taking place.
For the shot put, if there is a very large field, the throwers can spread out with part-
ners and warm-up by throwing back and forth to one another. There has to be at
least 35 feet between pairs and the athletes should be at least 30 feet apart depending
on how far they throw.
If there is a smaller group of shot putters (<10 athletes) with a large field, athletes can
spread out in a line (10 feet apart) and all throw in the same direction.
With groups, the discus flies too far and too unpredictably to be safely thrown by
more than one person at a time. This is where throwing rubber training balls in
handball courts can be a great training idea. Generally, handball courts provide a level,
clean throwing surface to on which to drill and a nice wall against which to throw.
Drills for the Shot Put
The Overhead. While standing on the toeboard with the back to the throwing area,
the athlete squats and throws the shot with two hands, back over the head. This drill
is designed as a prelude to throwing. (Also, the forward two-handed shot toss.)

418
C h a p t e r 1 7
Stand-Throw. (Reverse/Non-Reverse) The stand-throw is an integral part of the
warm-up for the shot. The stand-throw is the last half of the full throwing motion.
The basics of the stand-throw must be mastered before the full technique is attempt-
ed. This drill should be performed without the reverse. This helps to avoid shifting
the body weight onto the left leg too soon.
Stand-Throw From a Stretch. Start in the stand-throw position with a very wide
base. Then, pull the right leg in underneath the body and perform the throw. This
drill develops an active right leg by forcing the leg to push from the ground immedi-
ately after it is pulled underneath the body. Throwing from a stretch also develops leg
action for gliders.
Double-Pivot Non-Reverse Throws. The double-pivot non-reverse can be used at
the finish of either the stand-throw or a full throw. The purpose of this drill is to
avoid the premature shift of weight onto the block leg. This error is otherwise known
as lunging. Body weight must remain on the right leg as both feet pivot throughout
the throw. The power produced from this type of throwing is generated by the rota-
tion of the hips and body around the block leg and the extension of the right leg.
Step-Overs. These can be performed from either a stand or a full glide. This drill
works on the concept of chasing the shot and establishing a long pull. The thrower
who has a hard time shifting his or her body weight forward should use this drill. It
involves stepping over the toeboard with the right leg while releasing the shot. The
aim is to get as much body weight behind the shot as possible.
Right Leg Hop Drills. While holding the left foot with the left hand, the athlete push-
es backward off the right foot and lands with the toes pointing 90-degrees to the left.
This drill isolates the right leg drive out of the back of the ring for the glide technique.
Medicine Ball Drill for Left Leg Drive. A medicine ball is placed at the front of the
shot ring. The athlete should drive the left foot backwards and kick at the medicine
ball. This drill isolates the left leg drive in the glide technique.
Towel Drill. This drill works on keeping the shoulders closed as the athlete drives
across the shot ring. The athlete stands in the back of the ring in a position that simu-
lates the athlete is ready to begin a full throw. The right handed thrower holds on to a
towel with his or her left hand. Another person stands behind the ring and holds the

419
C h a p t e r 1 7
other end of the towel or the towel can be tied to a fence or a pole. The thrower then
drives across the ring while holding on to the towel.
Another towel drill can be used to work on a lazy right foot out of the back. A towel
is placed behind the right foot at a distance of a few inches to assure that the right leg
is being driven and pulled instead of dragged across the ring.
Half-Turns for Spinners. This drill starts with the athlete facing the toeboard with
the pivot foot placed in the center of the ring. The right foot pivots, and the left foot
swings around so the athlete comes to the stand-throw position. Then the shot is
thrown. This drill can be done in two parts or at a faster pace so one smooth move-
ment is attained. The half-turn is the first drill that the athletes using the spin should
do to learn pivotting with the shot underneath the chin.
Step-Ins for Spinners: The step-in begins with the thrower’s left foot placed in the
back of the ring and the right foot outside the ring. The thrower should have his or
her weight entirely on the ball of the left foot. The right foot steps into the center of
the ring, followed by a basic half-turn throw. The step-in drill eliminates the first half-
turn out of the back, emphasizes pivoting the right foot and establishing a throwing
rhythm for the spin technique.
360-Degree Turn at the Back of the Ring. This drill develops balance. Without the
shot, the athlete stands in the back of the ring in the position to begin throwing. The
athlete then pivots 360-degrees on the left foot. This movement then can be repeated
with a shot. Done properly, the athlete’s center of balance will remain over the ball of
the left foot. Balance out of the back is essential for a good throw, and this drill iso-
lates the balance point on the left leg.
Cone Drill. To maintain balance out of the back and generate momentum, the right
leg must sweep out and around. Place a cone a few feet from the back of the ring. As
the athlete pivots on the left foot, the right foot sweeps out in an attempt to touch
the cone.
Drills for the Discus Throw
Cone Throws. This drill is for the thrower who scoops the discus (e.g., dipping the
throwing shoulder). The athlete does stand-throws, but instead of throwing the dis-
cus, the athlete throws a traffic cone. By throwing a cone, the thrower will be aware of

420
C h a p t e r 1 7
where the implement is held and will pay special attention to avoid scooping. This is
a drill that can be done indoors in a gym on rainy days.
Towel Drill. Place a towel across the center width of the discus ring. Have the athlete
drive from the back hard enough so both feet land on the other side of the towel.
This drill develops strong drive out of the back.
Taped Discus Line Drill. Tape the discus to the hand. Using the lines on the track,
perform a South African drill. When doing the drill, avoid over-rotation by making sure
the feet always end up on the line. Keep the discus in the proper position at all times.
180-Degree Drill. Line up with the pivot foot in the center of the discus ring and
the opposite foot in the back of the ring with the discus wound back. Pivot on the
right foot and bring the left foot around 180-degrees to the front of the ring into the
stand-throw position. This drill is good for a thrower who has trouble pivoting.
90-Degree Turn Drill. This is an introductory drill which demonstrates the basic
movements of the full discus throw. The drill begins with the thrower in the back
of the ring in the normal starting position. A series of 90-degree pivots will be made
involving the right foot for three turns, and then the left foot for the last two 90-
degree turns until the stand-throw position is reached.
Weight Ball Throws. Small, weighted, plastic balls can be thrown into a wall from
the stand-throw position. This allows a high volume of throws in a short amount of
time. Certain technical flaws can be isolated easily with this drill, and corrections can
be made without much difficulty.
A Periodization Plan for the Season
A coach's personal philosophy and the athletes' individual needs will determine the
methods of technical training and conditioning used. It is up to each coach to imple-
ment his or her own system.
Every strength conditioning program begins slowly. As the thrower increases fitness,
the number of repetitions should be decreased and the amount of weight increased.
The weightlifting program should be designed so the athlete reaches peak strength
just before the most competitive part of the season.

421
C h a p t e r 1 7
During peak competition (league, section, or state meets), the thrower should rest and
back off the weights. Technical training should begin in the preseason – when throw-
ers work on specific weaknesses. Problems should be addressed throughout the season.
As important meets approach, practice should focus on timing, rhythm and the over-
all throw, rather than minor technical problems.
As with other events, training for the throws should be periodized over the course of
the year or season. Periodization is the division of training into phases, or periods,
emphasizing different goals and types of training. Periodized training frames the prog-
ress of training and skill development.
Generally, three to four weeks is the period over which athletes sustain improve-
ment with any single type of training. After that time, training results diminish.
Accordingly, different types of training need to be implemented.
In a two- to four-week training phase, primary emphasis should be given to one type
of training, secondary emphasis to another, and less emphasis (maintenance training)
to a third type. Within any training plan it is not recommended to have more than
three quality, or hard training days per week, including competitions. The other days
should consist of easy training or recovery days.
The goal of periodization is to manage the stress of training in order to produce
improvement. Recovery is part of that management.
TRAINING THROWERS SYSTEMATICALLY
A system of training uses several methods and types of training within a seasonal
training cycle. The following is a recommended shot put and discus throwing
training plan.

422
C h a p t e r 1 7
Preseason 2 General Training Weight Training
3 Weight Training Technique General Training
Early Season 3 Weight Training Technique Plyos
3 Technique Drills Plyos Weight Training
Mid-Season 2 Technique Drills & Throws Plyos Weight Training
2 Technique Throws Plyos Weight Training
Late Season 2-4 Special Training Light Plyos Weight Training
Full Throws
O'Brien
Invitational
Oerter
Relays
Throws
Strides 6 x 100
Outfield
Invitational
Warm-Up
Tech Drills
Easy Weights
Rest Day
Warm-Up
Plyometrics
Weights
Rest Day
Away Meet
vs
Wilkins HS
Home Meet
vs
Sullivan HS
Home Meet
vs
Long HS
Away Meet
vs
Sylvester HS
Warm-Up
10 Easy Throws
Easy Plyometrics
Warm-Up
10 Easy Throws
Strides
Warm-Up
Easy Weights
Warm-Up
Easy Weights
Easy Throws
Warm-Up
5 x 40 Sprints
Tech Throws
Warm-Up
5 x 30 Sprints
Weights
Olympic
Warm-Up
2 x 120 + 80 + 40
Throwing Drills
Warm-Up
6 x 30m Sprints
Weights
Tech Drills
Plyometrics
Weights
Olympic
Tech Drills
Plyometrics
Weights
Power
Tech Drills
Plyometrics
Weights
Tech Throws
Plyometrics
Rest Day
Rest Day
Rest Day
Rest Day
1
8
15
22
2
9
16
23
3
10
17
24
4
11
18
25
5
12
19
26
6
13
20
27
7
14
21
28
Sample THROWING Training Plan, April 1–28

423
C h a p t e r 1 7
RUNNING warm-up:
Pre-stretch Plus:

PLYOMETRICS:

TECHNIQUE DRILLS:
THROWS:

RUNNING AND CONDITIONING:
WEIGHT TRAINING:

Notes:
S H O T P U T A N D D I S C U S W O R K O U T
Sequence Date:

424
C h a p t e r 1 7
RUNNING warm-up:
Pre-stretch Plus:

PLYOMETRICS:

TECHNIQUE DRILLS:
THROWS:

RUNNING AND CONDITIONING:
WEIGHT TRAINING:

Notes:
S H O T P U T A N D D I S C U S W O R K O U T
Sequence Date:
1
2
3
4
6
5
Mon April 9
600m
2 x 30m: High Knees, Power Skips, Skipping Kicks,
Single Leg hops (1x30m each leg)
w/Medicing Ball: 2-hand underhand,
overhand, pivots, rotational throws
Upper Body Series
Shot Put Gliders: 5x standing, 5x stop and throw, 30x full cross
ring, 5x standing, 5x So. African Drill
Discus and Rotational Putters: 5x standing, 5x 360 pivot and
throw, 5x So. African Drill, 30x full cross ring, 5x standing

425
Appendix
The Rules of Competition
Finish Line Judges and Inspectors...........................................................................426
Rules of Competition for Track Events...................................................................427
Long Jump Rules......................................................................................................431
Triple Jump Rules.....................................................................................................433
High Jump Rules......................................................................................................435
Pole Vault Rules........................................................................................................437
Shot Put Rules...........................................................................................................441
Discus Rules..............................................................................................................443
Officials’ Instruction Sheets
Clerk of the Course.................................................................................................445
Head Timer/Finish Judge Instructions.................................................................. 446
Head Long Jump Judge Instructions........................................................................447
HeadTriple Jump Judge Instructions..........................................................................448
Head High Jump Judge Instructions.........................................................................449
Head Pole Vault Judge Instructions..........................................................................451
Head Shot Put Judge Instructions............................................................................453
Head Discus Judge Instructions................................................................................455

426
The Rules of Competition
F I N I S H L I N E J U D G E S A N D I N S P E C T O R S ' D E F I N I T I O N S
A Contestant is any athlete entered in the meet. A contestant must be in proper
uniform and wear his/her assigned number when numbers are required. A contestant
becomes a participant when he/she reports to the Clerk of the Course or Head Field
Judge for an event. A contestant may not participate in more than four events, includ-
ing relays.
A Heat is a preliminary race from which the fastest competitors advance to the finals
or next round of trials.
A Qualifier is a contestant who advances to the final round of competition from a
preliminary heat.
A Section is one or more races in the same event (held in lieu of preliminary heats and
a final) in which final places are determined by the times recorded in all sections.
A Lane is the course which is marked on the track to indicate the prescribed path of
the runner. Each lane is marked so that the left-hand lane line is outside the runner’s
lane, and the right-hand lane line is within the runner’s lane.
A Lap is one complete counter-clockwise circuit of the track.
Staggers are the different starting lines in adjoining lanes used for events run in lanes
for all or part of the race.
Alleys are a combination of two or more adjoining lanes used when three or more
runners start from the same stagger.
The Exchange Zone is the designated area measuring 20 meters in length for ex-
changing the baton during relay races. The beginning and end of the zone are marked
by lines extending across the width of the lane.
For relay legs of 200 meters or less, the Acceleration Zone is the designated area
D istribute to all

427
measuring 10 meters in length immediately preceding the exchange zone in which the
outgoing runner may accelerate before receiving the baton. The beginning of the ac-
celeration zone is to be indicated by a distinctive mark on the track.
Hurdling is a technique in which the competitor attempts to clear each hurdle by
striding over it.
A Relay is a race between teams of four runners, no one of whom may run more than
one Leg (part) of the relay.
A Baton is the implement which is handed from runner to runner in a relay race. A relay
leg is completed when the incoming runner passes the baton to the outgoing runner.
1. THE START
a. All races shall be started with the firing of a pistol or electronic gunless device which
provides smoke or a flash visible to the timers. A misfire does not constitute a start.
b. The starting commands for races less than 800 meters are, “On your marks,”
(after which competitors must take proper, steady positions behind the starting
line), followed by “set” (after which competitors must assume their final “set”
position without any part of their body touching on or beyond the starting line).
When all competitors are set and motionless, the Starter shall fire the pistol. The
interval between the “set” command and firing of the gun should be 1–2 seconds.
c. If the Starter is not satisfied that all competitors are ready and set, the starter
should instruct them to “Stand up,” and begin the sequence of starting
commands over again.
d. The starting commands for individual races or opening relay legs of 800 meters
or longer shall be, “On Your Marks.” When all competitors are steady, the starter
shall fire the starting device.
e. Violations which constitute a false start include:
• Failure to comply with the Starter’s commands.
R U L E S O F C O M P E T I T I O N F O R T R A C K E V E N T S

428
• Having any part of the body touching or in advance of the starting line when the
gun is fired.
• Failure to remain motionless after assuming the set position.
• Repeated attempts to distract opponents.
Note: A runner who commits a false start is disqualified from that event.
f. After an unfair start, the Starter shall recall all competitors to the starting line
by firing a second shot. If, due to contact with another runner, a runner falls in
the first 100 meters of a race of 400 meters or longer, the Starter shall recall all
competitors to the starting line by firing a second shot.
g. If a contestant’s starting blocks are slipping, the Starter may authorize someone
to hold and support the blocks.
2. THE FINISH
a. The finish line should be marked on the track across all lanes. The inside edge of the
line marks the actual finish.
3. RACES RUN IN LANES
a. When a race is run in lanes, each competitor must remain in his or her lane for
the entire distance. A competitor who, without being fouled and while running
around a curve, gains an advantage by stepping on or across the inside lane line for
three or more consecutive strides with either foot, shall be disqualified .
4. RELAY RACES
a. The baton must be carried in the hand throughout the race and handed (not
thrown) to the receiving runner.
b. The baton must be passed within the exchange zone. The position of the baton,
not the runners, determines whether the exchange is made within the zone.
c. The baton exchange is considered complete when it is in the hand of the
receiving runner.
d. If the baton is dropped outside the exchange zone, it must be retrieved by the
competitor who dropped it. If the baton is dropped within the exchange zone, it
may be retrieved by either competitor, even from another lane, provided neither
runner interferes with an opponent and the baton is retrieved within the limits of
the exchange zone extended across the track.

429
A baton that inadvertently leaves a runner’s hand must be retrieved immediately
without interference to other runners.
e. In relay races where acceleration zones are not permitted, each outgoing runner
must wait for the baton from a position entirely within the exchange zone.
f. Relay infractions resulting in disqualification:
• Failure to pass the baton within the exchange zone
• Lane violations
• Fouling or interference
• Receiving outside coaching during an exchange
• Throwing the baton following the finish of the relay
5. HURDLE RACES
A Hurdler shall be disqualified if the competitor:
• Does not attempt to clear each hurdle
• Deliberately knocks down a hurdle by hand or foot
• Advances or trails a leg or foot along the side of and below the height of the hurdle
• Runs over a hurdle in another lane
• Runs around a hurdle
• Impedes another hurdler
6. ACTS WHICH SHALL RESULT IN DISQUALIFICATION FROM
FURTHER PARTICIPATION IN THE MEET
a. Unsportsmanlike conduct, including:
• Unethical or dishonorable conduct
• Disrespectfully addressing an official
• Any flagrant behavior
• Intentional contact
• Taunting, criticizing or using profanity directed toward someone

430
This shall apply to all coaches, contestants and other team/school personnel.
b. Interfering with a competitor, and unfairly interrupting the competitor’s
normal running rhythm: This includes bumping, tripping, or running across
the competitor’s path. If a non-participating team member interferes with a
competitor during competition, the non-participating team member may be
disqualified from the meet. The non-participant’s teammate(s) may also be
disqualified from that event.
c. Receiving assistance during competition from a coach, teammate or anyone
connected directly or indirectly with the athlete or the athlete’s team. Such
assistance includes:
• Interference with another competitor
• Pacing by a teammate or persons not competing in the event
• Competitors joining or grasping hands with each other during a race
• Competitor using an aid during the race
• Communicating with a competitor through the use of a wireless device
• Coaching a competitor from a restricted area
• A competitor views videotape prior to the completion of the competition
d. Participating in more than four events.
e. Competing while wearing an illegal uniform.

431
L O N G J U M P R U L E S
DEFINITIONS
A Trial is an attempted jump.
A Flight is a group of contestants participating in a round of trials.
A Qualifier is a contestant who advances to the final round of competition by having
one of the top marks in the trials.
A Foul is a jump that is counted as a trial but is not measured because of a violation of
the rules.
RULES OF COMPETITION
1. The takeoff area must be marked by a takeoff board measuring 8–24 inches
wide and at least 4 feet in length secured firmly in the runway. (On hard-surfaced
runways, a painted takeoff board of contrasting color and of the same size may be
used in lieu of a takeoff board.)
2. The scratch line is the front edge of the takeoff board nearest the landing pit
and is used to mark the limit of the competitors’ run-up. The boys’ and girls’ scratch
line should be located at respective distances of approximately 12–8 feet from the
landing pit.
3. The landing pit should be filled with loose, soft sand to a depth that ensures a
safe landing and which reaches the same elevation as that of the takeoff board.
4. No markers may be placed on the runway or in the landing pit. However, it is
permissible to place a marker at the side of the runway or landing pit.
5. A trial shall be judged a foul if:
a. The competitor’s shoe extends over the scratch line (or the scratch line extended),
whether in the act of jumping or running through without jumping.
b. In the course of landing the competitor touches the ground outside the landing
pit nearer to the scratch line than the nearest mark made in the landing pit.
c. The competitor walks back through the landing pit toward the scratch line.
affix to the front of the head long jump judge's clipboard

432
d. The competitor fails to complete a trial within time allowed of being called
(unless excused to compete in another event).
e. The competitor employs any form of somersault technique.
6. League rules or the Games Committee will determine the number of trials and
the number of qualifiers that shall advance to the finals. Competitors place in
the order of their best mark, whether achieved in the trials or finals. Competitors
must have a legal mark in the trials to advance to the finals. Qualifiers for the
finals jump in reverse order with the competitor having the best mark in the trials
jumping last.
7. Measurement of a legal jump is made by extending the measuring tape from
the nearest break in the sand of the landing pit made by any part of the body
perpendicularly to the scratch line or its extension. (It is essential that the surface
of the sand be smooth and level with the takeoff board for each trial.) Measurements
are recorded to the nearest lesser 1⁄4 inch.
8. Ties are broken by awarding the higher place to the competitor with the second
best mark. If the tie remains, the higher place is awarded to the competitor with the
third best mark, etc.

433
T R I P L E J U M P R U L E S
DEFINITIONS
A Foul is a jump that is counted as a trial but is not measured because of a violation of
the rules.
1. The takeoff area must be marked by a takeoff board measuring 8–24 inches
wide and at least 4 feet in length, firmly secured in the runway. (On hard-surfaced
runways, a painted takeoff board of contrasting color and of the same size may be
used in lieu of a takeoff board.)
2. The scratch line is the front edge of the takeoff board nearest the landing pit,
and is used to mark the limit of the competitors’ run-up. The boys’ and girls’ scratch
lines should be located at respective distances of approximately 32 and 24 feet from
the landing pit.
3. The landing pit should be filled with loose, soft sand to a depth that ensures a
safe landing and which reaches the same elevation as that of the takeoff board.
4. No markers may be placed on the runway or in the landing pit. However, it is
permissible to place a marker at the side of the runway or landing pit.
5. In the hop phase, the jumper must land on the same foot with which he or she took
off. In the subsequent step phase, the jumper must land on the other foot. In the
final jump phase, the jumper must take off from the step phase into a long jump
landing. (Correct sequences: Beginning with a left leg takeoff, L-L-R-into a long
jump landing. Beginning with a right leg takeoff, R-R-L into a long-jump landing.)
6. A trial shall be judged a foul if:
a. The competitor’s shoe extends over the scratch line (or the scratch line extended),
whether in the act of jumping or running through without jumping.
affix to the front of the head TRIPLE jump judge's clipboard

434
b. In the course of landing the competitor touches the ground outside the landing
pit nearer to the scratch line than the nearest mark made in the landing pit.
c. The competitor walks back through the landing pit toward the scratch line.
d. The competitor fails to complete a trial within allotted time of being called
(unless excused to compete in another event).
Note: It is not a violation when a competitor’s trailing leg touches the ground
between phases.
finals jump in reverse order with the competitor having the best mark in the trials
jumping last.
8. Measurement of a legal jump is made by extending the measuring tape from
the nearest break in the sand of the landing pit made by any part of the
body, perpendicularly to the scratch line or its extension. (It is essential that
the surface of the sand be smooth and level with the takeoff board for each trial.).
Measurements are recorded to the nearest lesser 1⁄4 inch.
9. Ties are broken by awarding the higher place to the competitor with the second
best mark. If the tie remains, the higher place is awarded to the competitor with the
third best mark, etc.

435
H I G H J U M P R U L E S
DEFINITIONS
A Pass is a decision by the competitor not to take any or all of the three trials permit-
ted at a given height.
A Miss is an unsuccessful clearance.
1. The approach to the takeoff area should be a level surface.
2. The landing pad should meet minimum NFHS standards.
3. Hard and unyielding surfaces, such as but not limited to concrete, wood or asphalt,
that extend out from beneath the sides and back of the high jump landing pad shall
be padded with a minimum of 2-inch dense foam or other suitable material.
4. The standards are the uprights which support the crossbar. They must be placed at
least 12- feet apart and may not be moved during competition. The standards shall
have all exposed projections on the base covered or padded and be secured in a way
as to prevent them from tipping over.
5. The crossbar must be 12–14 feet 10 inches in length, square, triangular or circular
in thickness, not to exceed 13⁄16 inches, and weigh not more than 5 pounds.
6. Each competitor is allowed a maximum of three trials at each height in the order
in which names are drawn or assigned.
7. A competitor may elect to pass a height to jump at the next higher height or, after
one or two misses, elect to take his or her remaining one or two trials at a higher height.
8. A competitor is eliminated from further competition after three consecutive
misses at any heights. When only one competitor remains in the competition, he or
she may determine the successive heights of the crossbar.
9. Competitors are allowed to place a removable marker at the beginning of the
run-up and at the point of takeoff.
affix to the front of the head high jump judge's clipboard

436
10. Once competition has begun, no practice is permitted on the approach or
takeoff area. However, a competitor who has passed three consecutive heights may
be permitted a warm-up jump without the crossbar in place.
11. The bar may not be lowered once competition has started except during a
jump-off to break a tie for first place.
12. The jump takeoff must be made from one foot. No weights or artificial aids
may be used.
13. A trial shall be judged a miss if:
a. The jumper displaces the crossbar in an attempt to clear it.
b. The jumper touches the ground or landing area beyond the plane of the crossbar
(or the crossbar extended) without clearing the bar.
c. After clearing the bar, the jumper touches a standard, steadies the bar or displaces
the crossbar.
d. The jumper fails to complete a trial within the allotted time of being called.
14. Ties for first place only are broken by:
a. Awarding the higher place to the competitor with the fewest trials at the height at
which the tie occurs.
b. If the tie still occurs, the competitor with the fewest total number of unsuccessful
trials throughout the competition, up to and including the height last cleared, shall
be awarded the higher place.
c. Passed trials shall not count as misses.
d. If the tie remains after applying (a) and (b), and:
1. If it concerns first place, the competitors tying shall make one more attempt for
the height at which they failed. If no decision is reached, the bar shall be lowered
by one inch. If one or more of the tying competitors clear the height, the bar shall
be raised by intervals of one inch. Each competitor shall attempt one trial at each
height until the winner is determined.
2. If the tie concerns any place other than first place, the competitors shall be
awarded the same place.
3. A competitor shall be credited with his or her best achievement if it occurs in a
jump off for first place.

437
P O L E V A U L T R U L E S
DEFINITIONS
A Pass is a decision by the competitor not to take any or all of the three trials permit-
ted at a given height.
A Miss is an unsuccessful clearance.
1. The runway should be a minimum of 130 feet long and 42 inches wide whenever
possible.
2. The landing pad must meet the minimum standards outlined in the NFHS Track
and Field rule book.
3. Hard and unyielding surfaces such as but not limited to concrete, wood or
asphalt, that extend out from beneath the sides and back of the pole vault landing
pad shall be padded with a minimum of 2-inch dense foam or other suitable
material..
4. The standards are the uprights which support the crossbar. They must be placed
not less than 12 feet or more than 14 feet 2 inches apart. The pins which support
the crossbar must be round, _ inch in diameter, and must project no more than 3
inches at right angles from the side of the standards opposite the runway. No tape,
indentations, or aids of any kind may be used to help keep the crossbar in place.
The standards shall have all exposed projections on the base covered or padded and
be secured in a way as to prevent them from tipping over.
5. A competitor shall have the standards or uprights set to position the crossbar
from a point 12 inches beyond the vertical plane or the top of the stopboard, up to
a maximum distance of 30 inches in the direction of the landing surface.
6. The crossbar must be 12–14 feet 10 inches in length; square, triangular, or circular,
not more than 13⁄16 inches thick; and weigh not more than 5 pounds.
affix to the front of the head pole vault judge's clipboard

438
7. A vaulting box into which the vaulting pole is placed must be recessed into the end
of the runway in front of the landing pit. The vaulting box may not contain any
foreign materials. (Consult the NFHS rule book for specific dimensions.)
8. The vaulting pole may be of any material and of any length and diameter. It may
be wrapped for gripping with not more than two layers of adhesive tape of uniform
thickness. The lower end of the pole may be wrapped with sponge rubber and/or
several layers of tape to protect it when planted into the vaulting box.
9. The competitor’s weight shall be at or below the manufacturer’s pole rating. The
manufacturers must include on each pole: the pole rating that shall be a minimum
of 3/4 inch in a contrasting color located within or above the top handhold position
a 1-inch circular band indicating the maximum top handhold position with the
position being determined by the manufacturer.
A competitor shall not use a training pole, a pole which is improperly marked, or a
pole rated below his/her weight during warm-up or competition.
Penalty: Disqualification from the event. Prior to warm-up, the field event
referee, head field judge or assigned inspector of implements shall inspect each pole
to be used in the competition to verify that the poles are legal equipment. This
includes checking the placement of a top handhold band, numerical pole ratings
a minimum of 3/4 inches in a contrasting color located within or above the top
handhold band, and the proper binding of not more that two layers of adhesive tape
of uniform thickness. The binding shall not be on or above the top handhold.
It is the responsibility of the coach to verify the competitor will use a legal pole rated
at or above his/her weight.
10. No competitor is allowed to use the pole of another individual without the
owner’s permission.
11. No taping of the hands or fingers is permitted except to cover an open wound.
Gloves may not be worn.
12. Each competitor is allowed a maximum of three trials at each height in the
order in which names are drawn or assigned.
13. A competitor may elect to pass a height to jump at the next higher height or,
after one or two misses, may elect to take his/her remaining one or two trials at a
higher height.

439
14. A competitor is eliminated from further competition after three consecutive
misses at any height. When only one competitor remains in the competition, he or
she may determine the successive heights of the crossbar.
15. No mark or marker may be placed on the runway, but it is permissible to place
markers on the side of the runway.
16. Once competition has begun, no practice is permitted. However, a competitor
who has passed three consecutive heights may be permitted a warm-up jump
without the crossbar in place.
17. The bar may not be lowered once competition has started except during a jump
off of a tie for first place.
18. Any competitor may have the standards moved backward 24 inches toward
the landing pit or forward 12 inches toward the runway from either side of a line
through the back of the vaulting box stopboard.
19. A trial shall be judged a miss if:
a. The crossbar is displaced by the body or the pole from the pins on which it
originally rested.
b. The vaulter leaves the ground and fails to clear the bar.
c. After clearing the bar, the vaulter touches a standard and displaces the crossbar.
d. The standards are incorrectly positioned.
e. After leaving the ground, the vaulter moves his or her lower hand above his or her
upper hand or moves the upper hand higher on the pole.
f. The vaulter fails to complete a trial within the allotted time of being called.
20. It does not count as a trial if the competitor’s pole breaks during an attempt.
21. An official or another competitor may catch the pole after it has been released
by the competitor, if it is falling away from the crossbar and uprights.
22. A pole may pass under the crossbar without the attempt being counted as a miss.
23. Ties for first place only are broken by:
a. Awarding the higher place to the competitor with the fewest trials at the height at
which the tie occurs.

440
b. If the tie still occurs, the competitor with the fewest total number of unsuccessful
trials throughout the competition, up to and including the height last cleared, shall
be awarded the higher place.
c. Passed trials shall not count as misses.
d. If the tie remains after applying (a) and (b), and:
1. If it concerns first place, the competitors tying shall make one more attempt
for the height at which they failed. If no decision is reached, the bar shall be lowered
by three inches. If one or more of the tying competitors clear the height, the bar
shall be raised by intervals of three inches. Each competitor shall attempt one trial at
each height until the winner is determined.
2. If the tie concerns any place other than first place, the competitors shall be
awarded the same place.
3. A competitor shall be credited with his or her best achievement if it occurs
in a jump off for first place.
e. If the tie still remains, lowering the bar by intervals of 3 inches and allowing the
competitors one trial until the winner is determined.

441
S H O T P U T R U L E S
DEFINITIONS
A Trial is an attempted throw.
A Foul is a throw that is counted as a trial but is not measured because of a violation
of the rules.
1. The boys’ shot must weigh 12 pounds and the girls’ shot must weigh 4
kilograms. The shot must be a smooth-surfaced solid sphere without any
indentations or projecting points.
2. The shot must be thrown from a concrete or asphalt circle 7 feet in diameter
and land within a sector marked on the ground by lines extending from the center
of the circle to the outside edges of the stopboard into the landing sector. The width
of the sector is stated in the NFHS rule book.
3. The circumference of the circle must be marked by a steel or plastic band 6mm
in thickness or by a painted line.
4. An arc-shaped stopboard measuring 4-ft. long, 4-inches high and 4-inches wide
must be firmly secured to the front half of the circle so its inside edge coincides with
the inside edge of the circle.
5. A legal put must be made from the shoulder with one hand only. During the
attempt the shot may not drop below or behind the shoulder.
6. Taping the wrist, palm, or back of the hand is permitted, as is taping not
more than two adjoining fingers tightly together. There can be no connecting
tape between the fingers and the palm, wrist, or back of the hand, or between the
wrist and the palm or back of the hand. Gloves are not permitted, but competitors
may apply a suitable substance to the hand to improve gripping the shot. No such
substance may be applied to the surface of the circle or the competitors’ shoes.
Competitors may wear a leather belt to protect the spine from injury.
affix to the front of the head shot put judge's clipboard

442
7. A trial is judged a foul if:
a. A throw lands on or outside one of the sector lines.
b. After entering the circle, the competitor fails to pause before starting the throw.
c. The competitor touches outside the inside edge of the circumference of the
throwing circle or stopboard.
d. The competitor leaves the circle before the shot has landed and the judge calls
“mark” or, after completing the throw, fails to exit under control through the back half
of the circle.
e. The competitor fails to complete a trial within the allotted time of being called.
8. A competitor may interrupt a trial once started and begin again provided no
infraction of the rules has been committed.
9. A throw is measured by extending the measuring tape from the nearest edge
of the first mark made by the shot to the center of the circle. The measurement
is taken at the point where the tape touches the inside edge of the stopboard to the
nearest lesser _ inch.
10. League rules or the Games Committee will determine the number of trials
and the number of qualifiers that shall advance to the finals. Competitors place
in the order of their best mark, whether achieved in the trials or finals. Competitors
finals throw in reverse order with the competitor having the best mark in the trials
throwing last.
11. Following a completed attempt, the shot must be carried back to the circle
and never thrown or rolled back.

443
D I S C U S R U L E S
DEFINITIONS
A Trial is an attempted throw.
A Foul is a throw that is counted as a trial but is not measured because of a violation
of the rules.
1. The boys’ discus must weigh 3 pounds 9 ounces and the girls’ discus must
weigh 1 kilogram. Both sides of the discus must be identical, without any
indentations or rough edges.
2. The discus must be thrown from a concrete or asphalt circle 8 feet 2_ inches
(2.50 meters) in diameter inside a U-shaped enclosure or cage to protect the
safety of the officials, spectators, and competitors.
3. The discus must land within sector marked on the ground with lines extending
from the center of the circle. The width of the sector is outlined in the NFHS
rulebook.
The circumference of the circle must be marked by a steel or plastic band 6mm
in thickness or by a painted line.
4. Competitors may not wear gloves or tape any part of the hand or fingers.
Competitors may apply a suitable substance to the hand to improve gripping the
discus, but no substance may be applied to the surface of the circle or the competi-
tors’ shoes. Competitors may wear a leather belt to protect the spine from injury.
5. It is a foul if:
a. A throw lands on or outside one of the sector lines.
b. After entering the circle, the competitor fails to pause before starting the throw.
affix to the front of the head discus judge's clipboard

444
c. The competitor touches outside the inside edge of the circumference of the
throwing circle.
d. The competitor leaves the circle before the discus has landed, and the judge has
called “mark,”or after completing the throw, fails to exit under control through the
back half of the circle
e. The competitor fails to complete a trial within allotted time of being called.
6. A competitor may interrupt a trial once started and begin again, provided no
infraction of the rules has been committed.
7. A throw is measured by extending the measuring tape from the nearest edge of
the first mark made by the discus to the center of the circle. The measurement is
taken at the point where the tape touches the inside edge of the circumference of the
circle and recorded to the nearest lesser inch.
finals throw in reverse order with the competitor having the best mark in the trials
throwing last.
9. Following a completed attempt, the discus must be carried back to the circle
and never thrown or rolled back.

445
Officials' Instruction Sheets
1. Call participants to check-in in advance of each track event. Make any changes
or corrections necessary on the entry sheets.
2. Begin checking in athletes 10 minutes prior to the first event and try to stay three
flights ahead throughout the meet. (While one race is in progress, the next flight of
participants should be ready to take their starting positions upon its completion).
3. Check to see each runner is in legal uniform and not in violation of any NFHS
rules (and wearing a properly affixed number if required).
4. Assign each runner to his or her proper race section, lane or position on the
starting line.
5. Provide all necessary information to participants en masse prior to their race,
including:
• The event which is in progress on the track and the event which proceeds their race.
• The location near the finish line where competitors should wait to be called to the
starting line.
• The position to assume at the starting line. (Either standing in front of their
blocks or two feet behind the international curve start line).
• Where to break for the inside lane if the race is not run in lanes all the way.
• What to do at the completion of the race. (Return to the finish line in their lanes
or order of finish until dismissed by the Head Timer.)
6. Send the entry sheet to the Head Timer prior to each event.
C L E R K O F T H E C O U R S E
affix to back of clerk ' s clipboard

446
H E A D T I M E R / F I N I S H J U D G E I N S T R U C T I O N S
1. Check out stopwatches for all the Timers from the Head Coach/Meet Director.
2. Assign timers the place that they are to pick and time in each race. Assign the
most experienced timers to the most difficult places to pick — 3rd, 4th, 5th, etc.
3. Issue each Timer a stopwatch.
4. Position the Timers in direct line with the finish line. If there is a tiered judges’
stand at the finish, be sure it is placed at least five meters back from Lane 1 so that
competitors in the outside lanes can be seen over those nearer the judges. If there is
no judges’ stand available, divide your Timers between finish-line positions on
either side of the track.
5. Instruct Timers to:
• Judge each runner’s finish place by when the chest — not the head, arms or legs
— crosses the finish line.
• Identify the competitor they have timed by name or lane assignment after each race.
• Refrain from discussing their times or place-picks until after they have been
requested by the Head Timer.
6. Notify the Starter when the Timers are ready prior to each race by blowing a whis-
tle or waving a colored flag.
7. Record the competitors’ finish places and times on the result sheet as reported to
you by the Timers after each race.
8. Defer to the judgment of the Timer picking the higher place to resolve any dis-
puted finishes.
9. Adjust any times as might be necessary (e.g., if the 3rd-place time is faster than the
2nd-place time).
10. Keep the finish line clear of non-participating athletes and spectators.
11. Send the result sheet to the Announcer and Scorer’s table at the completion of
each event.
12. Upon completion of the final running event, collect the stopwatches from the
Timers and return them to the Head Coach/Meet Director.
affix to the front of the head timer's clipboard

447
H E A D L O N G J U M P J U D G E I N S T R U C T I O N S
1. Review the “Rules of Competition” for the Long Jump affixed to the front of the
clipboard.
2. Determine the order of competition for Varsity Boys, Varsity Girls, FS Boys and
JV Girls from the Head Coach/Meet Director.
3. List the competitors’ first and last names and school affiliations on your event
sheet as they check-in.
4. Allow competitors in the first flight time to measure and mark their run-up
distances and take at least two practice jumps.
5. When you begin a flight of competition, call the contestants in groups of three,
as follows: “Johnson up, Smith on deck, Jones to follow.” Record a miss if the com-
petitor does not complete a trial within the allotted time of being called.
6. Change the jumping order, if necessary, to allow competitors to participate in
other events. However, set a time limit for the completion of all trials.
7. When judging a jump, position yourself at the jumper’s takeoff leg side of the
takeoff board. Watch closely that the competitor’s shoe does not touch beyond the
scratch line at takeoff, and that no violation occurs during or after landing. Give a
verbal signal of Fair or Foul after the competitor leaves the landing pit.
8. When marking a jump, remind the Landing Judge that only “fair” jumps will
be measured and that the marking spike must be placed at the break of the sand
made nearest to the takeoff board.
9. When measuring a jump, close off the runway by either placing a cone on the
takeoff board or by standing on the run-way behind the takeoff board. Be sure
the measuring tape is perpendicular to the scratch line of the takeoff board or the
scratch line extended. After you have recorded the mark, do not remove the cone
from the takeoff board or leave the runway until you have called the next three com-
petitors and the pit is raked and ready for the next trial.
10. At the completion of a flight of trials, announce the qualifiers and begin the
finals immediately.
11. Allow enough time between levels of competition for each competitor to measure
and mark his or her run-up distances and to take at least two practice jumps.
affix to the back of the head long jump judge's clipboard

448
H E A D T R I P L E J U M P J U D G E I N S T R U C T I O N S
1. Review the “Rules of Competition” for the Triple Jump affixed to the front of the
clipboard.
sheet as they check in.
distances and take at least two practice jumps.
6. Change the jumping order, if necessary, to allow competitors to participate in
other events. However, set a time limit for the completion of all trials.
7. When judging a jump, position yourself at the jumper’s takeoff leg side of the
takeoff board. Watch closely that the competitor’s shoe does not touch beyond the
scratch line at takeoff, that the jumping sequence is correct into the long jump land-
ing (L-L-R or R-R-L), and that no violation occurs during or after landing. Give a
verbal signal of Fair or Foul after the competitor leaves the landing pit.
8. When marking a jump, remind the Landing Judge that only “fair” jumps will
be measured and that the marking spike must be placed at the break of the sand
made nearest to the takeoff board.
9. When measuring a jump, close off the runway by either placing a cone on the
takeoff board or by standing on the runway behind the takeoff board. Be sure
the measuring tape is perpendicular to the scratch line of the takeoff board or the
scratch line extended. After you have recorded the mark, do not remove the cone
from the takeoff board or leave the runway until you have called the next three com-
petitors and the pit is raked and ready for the next trial.
finals immediately.
11. Allow enough time between levels of competition for each competitor to mea-
sure and mark his/her run-up distances, and to take at least two practice jumps.
affix to the back of the head triple jump judge's clipboard

449
H E A D H I G H J U M P J U D G E I N S T R U C T I O N S
1. Review the “Rules of Competition” for the High Jump affixed to the front of the
clipboard.
JV Girls, and the starting heights and height progression for each level from the
Head Coach/Meet Director.
sheet as they check in. Advise each competitor of the starting height for competition
and enter the intended opening for each competitor on the event sheet.
distances, takeoff points, and at least two practice jumps.
5. Before you begin a flight of competition, be sure all sections of the landing pit
are securely fastened together. Mark the position of the base of each standard
on the takeoff area with chalk or tape so they can be reset in exactly the same
position, should they be knocked over in the course of competition. Also, mark the
underside and outsides of the crossbar so it can be reset in exactly the same position
each time it is displaced.
7. When judging a jump, position yourself to the side of one of the standards so
that you are looking down the vertical plane of the standards and crossbar and
facing the jumper as he or she takes off. (The bar-setter should stand to the side
of the other standard.) Be sure that the ends of the crossbar and the landing pit are
not touching the standards. Ensure that the pit will not bulge out and touch the
standards upon the jumper’s landing. If the jumper touches the bar, causing it to
vibrate, do not steady it until you are certain it will not fall.
8. When replacing the crossbar, be sure that it is sitting on the center of the sup-
ports and the same sides are always facing down and out.
affix to the back of the head high jump judge's clipboard

450
9. When measuring a height, place the zero-mark of the tape on the takeoff sur-
face and extend it upward and perpendicular to the topside of the lowest point
of the crossbar. Measurements should be recorded to the nearest lesser _ inch. Each
new height should be re-measured (do not trust the readings on the standards),
and the bar should be measured before and after any record attempt. (If there
is any difference between those two measurements, the lower height is the official
measurement.)
10. Remember that only ties for first place are broken using the procedure
described on the rules sheet on the front of your clipboard.
11. Allow enough time between flights of competition for each competitor to
measure and mark his or her run-up distance and takeoff point and to take at
least two practice jumps.

451
H E A D P O L E V A U L T J U D G E I N S T R U C T I O N S
1. Review the “Rules of Competition” for the Pole Vault affixed to the front of the
clipboard.
2. Determine the order of competition for Varsity and FS Boys and Girls, and the
starting heights and height progression for each level, from the Head Coach/Meet
Director.
sheet as they check in. Advise each competitor of the starting height for his/her
competition and enter the height at which they intend to open on the event sheet.
4. Allow competitors in the first flight time to measure their run-up distances,
place markers to the side of the runway, and to take at least two practice jumps.
5. Before you begin a flight of competition, be sure all sections of the landing pit
are securely fastened together. Mark the underside and outsides of the crossbar
so it can be reset in exactly the same position each time it is displaced.
7. When judging a jump, position yourself to one side of the vaulting box so
that you are looking down the vertical plane of the vault box. The pole-catcher
should stand on the other side and be instructed not to catch the pole unless it is
falling away from the crossbar and standards. (You should never take the responsibil-
ity for catching the pole and inhibit your ability to observe each attempt from start
to finish!) Under windy conditions, it may be difficult to judge whether the wind
or the vaulter displaces the bar. Under such conditions you may position someone
behind the standards to hold the crossbar in place with a spare pole until the com-
petitor leaves the ground.
8. When replacing the crossbar, be sure an equal portion of the bar extends
beyond the supporting pins on each standard, and that the same sides of the
bar are always down and facing out.
affix to the back of the head pole vault judge's clipboard

452
9. When measuring a height, place the zero mark of the tape on the takeoff sur-
face and extend it upward and perpendicular to the topside of the lowest point
of the crossbar. Measurements should be recorded to the nearest lesser _ inch. Each
new height should be re-measured (do not trust the readings on the standards),
and the bar should be measured before and after any record attempt. (If there
is any difference between those two measurements, the lower height is the official
measurement.)
10. Remember that only ties for first place are broken using the procedure
described on the rules sheet on the front of your clipboard.
11. Allow enough time between flights of competition for competitors to measure
run up distances, place their markers to the side of the runway, and take at
least two practice jumps.

453
H E A D S H O T P U T J U D G E I N S T R U C T I O N S
1. Review the “Rules of Competition” for the Shot Put affixed to the front of the
clipboard.
4. Safety is your most important consideration and it is your responsibility to
protect competitors, officials and spectators by enforcing the following rules:
a. The landing sector must be cordoned-off with rope or pennants placed well out-
side the sector lines.
b. Spectators must stand behind the throwing circle or a safe distance behind the
Landing Judges and beyond the landing sector, NEVER along the sides of the land-
ing sector!
c. No practice throws may be taken without your supervision, or from any place
other than the competition circle.
d. No throw may be initiated until you have given the thrower a verbal OK that the
landing sector is clear and the Landing Judges are ready.
e. The shot must always be carried back to the circle during practice and competi-
tion, never thrown or rolled back.
f. Once competition has begun, competitors are not allowed to throw any imple-
ments in any part of the event area.
g. Contestants who do not follow these safety rules will be warned once, then dis-
qualified from competition.
as follows: “Johnson up, Smith on deck, Jones to follow.” Inspect each competitor’s
shot when you call him/her for first trial. Record a miss if the competitor does
not complete a trial within allotted time of being called.
affix to the back of the head shot put judge's clipboard

454
6. When judging a throw, position yourself at the side of the circle from which
the shot will be released (right-handed thrower use the right side/left-handed
thrower, use the left side). Watch closely for hand fouls as the thrower moves to the
front of the circle, and for foot fouls on the top and sides of the stopboard.
7. When marking a throw, position the Landing Judges at equal spacings across
the back of the landing sector. Remind them that a legal throw must land within,
and not on, the sector lines and that the marking spike must be placed in the
ground at the mark made nearest to the landing circle. The shot must be carried and
dropped off to the side of the landing sector, not thrown or rolled, for pick-up by
the contestant.
8. When measuring a throw, be sure the tape is straight, not twisted, extended
through the center of the circle, and read at the point it touches the inside edge
of the stopboard.
finals immediately.
have at least two practice throws.

455
H E A D D I S C U S J U D G E I N S T R U C T I O N S
1. Review the “Rules of Competition” for the Discus affixed to the front of the clip-
board.
4. Safety is your most important consideration, and it is your responsibility to
protect competitors, officials, and spectators by enforcing the following rules:
a. The landing sector must be cordoned-off with rope or pennants placed well out-
side the sector lines.
b. Spectators must stand behind the discus cage or a safe distance behind the
Landing Judges and beyond the landing sector, NEVER along the sides of the land-
ing sector!
c. No practice throws may be taken without your supervision, or from any place
other than the competition circle.
d. No throw may be initiated until you have given the thrower a verbal OK that the
landing sector is clear and the Landing Judges are ready.
e. The discus must always be carried back to the circle during practice and competi-
tion — never thrown or rolled back.
f. Once competition has begun, competitors are not allowed to throw any imple-
ments in any part of the event area.
g. Contestants who do not follow these safety rules will be warned once, then dis-
qualified from competition.
as follows: “Johnson up, Smith on deck, Jones to follow.” Inspect each competitor’s
discus when you call him or her for their first trial. Record a miss if the competitor
does not complete a trial within the allotted time of being called.
affix to the back of the head discus judge's clipboard

456
6. When judging a throw, position yourself behind the cage at the side of the
circle from which the discus will be released (right-handed thrower, use the right
side/left-handed thrower, use the left side). Watch closely for foot fouls during the
turns and release.
7. When marking a throw, position the Landing Judges at equal spacings across
the back of the landing sector. Remind them that a legal throw must land within,
and not on, the sector lines and that the marking spike must be placed in the
ground at the mark made nearest to the landing circle. The discus must be carried
and dropped off to the side of the landing sector (not thrown or rolled) for pick-up
by the contestant.
8. When measuring a throw, be sure the tape is straight (not twisted), extended
through the center of the circle, and read at the point it touches the inside edge
of the circle.
finals immediately.
have at least two practice throws.

La84trackfield

More Related Content

What's hot (18)

Similar to La84trackfield (20)

More from Wan Suhaimi Wan Setapa (20)

Recently uploaded (20)

La84trackfield