Unit 3 sp assembler

Subject-System Programming
Sub. Code-2150708
Unit- 3 (Assemblers)
By- Prof. Deepmala Sharma

Contents
• What is an assembly language programming (ALP)?
• What is Assembler?
• Applications of Assembly Language
• Advantages of AL
• Disadvantages of AL
• Elements of ALP
– Statement Format and Machine Instruction Format
• Types of AL Statements
• A Simple Assembly Scheme
• Pass Structure of Assembler
• Design of a Two pass Assembler
– Pass I of the Assembler
– Intermediate code form (Variant I and Variant II)
– Pass II of the Assembler

Assembly Language Programming
(ALP)
• Assembly language is a kind of low level programming
language, which uses symbolic codes or mnemonics as
instruction.
• Some examples of mnemonics include ADD, SUB, LDA,
and STA that stand for addition, subtraction, load
accumulator, and store accumulator, respectively.
• For processing of an assembly language program we
need a language translator called assembler
• Assembler- Assembler is a Translator which translates
assembly language code into machine code

Applications of Assembly Language
• assembly language is used for direct hardware
manipulation, access to specialized processor
instructions, or to address critical
performance issues.
• Typical uses are device drivers (CD, HDD),
low-level embedded systems (Keyboard, water
tank indicator) and real-time systems
(computer, notepad).

Advantage and Disadvantages of ALP
• Advantages-
• Due to use of symbolic codes (mnemonics), an assembly program
can be written faster.
• It makes the programmer free from the burden of remembering the
operation codes and addresses of memory location.
• It is easier to debug.
• Disadvantages-
• it is a machine oriented language, it requires familiarity with
machine architecture and understanding of available instruction
set.
• Execution in an assembly language program is comparatively time
consuming compared to machine language. The reason is that a
separate language translator program is needed to translate
assembly program into binary machine code

Elements of ALP
• An assembly language provides the following three basic facilities that
simplify programming:
• Mnemonic operation codes: The mnemonic operation codes for machine
instructions (also called mnemonic opcodes) are easier to remember and
use than numeric operation codes. Their use also enables the assembler
to detect use of invalid operation codes in a program.
• Symbolic operands: A programmer can associate symbolic names with
data or instructions and use these symbolic names as operands in
assembly statements. This facility frees the programmer from having to
think of numeric addresses in a program. We use the term symbolic name
only in formal contexts; elsewhere we simply say name.
• Data declarations: Data can be declared in a variety of notations, including
the decimal notation. It avoids the need to manually specify constants in
representations that a computer can understand, for example, specify 5 as
(11111011).

Statement Format
• [..] enclosed specification is optional
• Ex: AGAIN MULT BREG,AREG; multiply
• Label-label is associated with symbolic name
with memory word. ex AGAIN etc.
• Symbolic name= Mnemonic Operation Code
(Mnemonic opcode) ex MULT
• Memory word= Operand Specification ex
BREG and AREG etc

Statement Format cont’d
• Operand spec. syntax-
– The operand AREA refers to the memory word with
which the name AREA is associated.
– The operand AREA+5 refers to the memory word that
is 5 words away from the word with the name AREA.
Here '5' is the displacement or offset from AREA.
– The operand AREA(4) implies indexing the operand
AREA with index register 4 that is, the operand
address is obtained by adding the contents of index
register 4 to the address of AREA.
– The operand AREA+5 (4) is a combination of the
previous two specifications.

Machine Instruction Format
Ex : + 09 0 113
• Opcode, reg.operand and Memory Operand occupy 2,1,and 3 digits.
• This is a Machine code which will produce by assembler.

Types of Assembly Language statements
• Imperative statements (IS)
– An imperative statement in assembly language indicates the
action to be performed during execution of assembly statement
– Ex:- A 1,FOUR
• Declarative Statement (DL)
– These statements declares the storage area or declares the
constant in program.
– [Lable] DS <constant> ex : A DS 1
– [Lable] DC ‘<Value>’ ex : ONE DC ‘1’
• Declaration statements are for reserving memory for
variables. DS- Declare storage and DC- Declare constant
• (A DS 1) statement reserves 1 word of memory for variable
A
• (ONE DC ‘1’) statement associates the name ONE with a
memory word containing the value ‘1’

Types of Assembly Language
statements cont’d
• Assembler Directives
– It instructs the assemble to perform certain actions
during the assembly of a program.
– START <constant > ex: START 200
– END [<operand spec.>] ex: END
– Advance Assembler Directives
– ORIGIN <address spec.> ex: ORIGIN LOOP+2
– <symbol> EQU <address spec.> ex: BACK EQU LOOP
– LTORG <=‘value’> ex LTORG
=‘1’
• Where <Address spec.> can be <constant> or <symbol
name> + <displacement>

Advance assemble directives
• ORIGIN- This directive instructs the assembler to put
the address given by <address specification> in the
location counter
• EQU- The statement simply associates the name
<symbol> with the address specified by <address
specification>. However, the address in the location
counter is not affected.
• LTORG- The LT0RG directive, which stands for 'origin for
literals', allows a programmer to specify where literals
should be placed
– If a program does not use an LTORG statement, the
assembler would enter all literals used in the program into
a single pool and allocate memory to them when it
encounters the END statement.

Use of ORIGIN, EQU and LTORG
•ORIGIN- Statement number 18 of
the program viz. ORIGIN LOOP + 2
puts the address 204 in the location
counter because symbol LOOP is
associated with the address 202. The
next statement MULT CREG, B is
therefore given the address 204.
•EQU-On encountering the
statement BACK EQU LOOP, the
assembler associates the symbol
BACK with the address of LOOP i.e.
with 202
• LTORG- The literals ='5' and ='1' are
added to the literal pool in
Statements 2 and 6, respectively. The
first LTORG statement (Statement 13)
allocates the addresses 211 and 212
to the values '5' and ‘1’.

A Simple Assembly Scheme
• Design Specification of an assembler
– Four step approach to develop a design specification
1) Identify the information necessary to perform a task
2) Design a suitable data structure to record the
information
3) Determine the processing necessary to obtain and
maintain the information
4) Determine the processing necessary to perform the
task

Fig.-Design of assembler
A Simple Assembly Scheme cont’d

Analysis phase
• The primary function performed by the analysis phase is the
building of the symbol table.
• For this purpose it must determine address of the symbolic name.
This function is called memory allocation.
• To implement memory allocation a data structure called location
counter (LC) is used, it is initialized to the constant specified in the
START statement.
• We refer the processing involved in maintaining the location
counter as LC processing.
• Tasks performed Analysis phase
1.Isolate the label, mnemonics opcode, and operand fields of a
constant.
2.If a label is present, enter the pair (symbol, <LC content>) in a
new entry of symbol table.
3.Check validity of mnemonics opcode.
4.Perform LC processing.

Synthesis phase
• Consider the assembly statement,
– MOVER BREG, ONE
• We must have following information to synthesize the machine
instruction corresponding to this statement:
– 1.Address of name ONE
– 2.Machine operation code corresponding to mnemonics MOVER.
• The first item (ONE)of information depends on the source program;
hence it must be available by analysis phase.
• The second item (MOVER)of information does not depend on the
source program; it depends on the assembly language.
• Based on above discussion, we consider the use of two data
structure during synthesis phase:
– Symbol table-Each entry in symbol table has two primary field name
and address. This table is built by analysis phase
– Mnemonics table- An entry in mnemonics table has two primary field
mnemonics and opcode.

Synthesis phase cont’d
• Task performed by Synthesis phase
– 1.Obtain machine opcode through look up in the
mnemonics table.
– 2.Obtain address of memory operand from the
symbol table.
– 3.Synthesize a machine instruction.

Pass Structure of Assembler
• Single pass translation
– A one pass assembler requires 1 scan of the
source program to generate machine code.
– In one Pass translation forward reference problem
occures
• Problem of Forward Reference
– When the variables are used before their
definition at that time problem of forward
reference accurse.

Problem of Forward Reference
JOHN START 0
USING *, 15
L 1, FIVE
A 1,FOUR
ST 1, TEMP
FOUR DC F’4’
FIVE DC F’5’
TEMP DS 1F
END

Solution of forward reference problem
• The process of forward references is tackled using
a process called back patching.
• The operand field of an instruction containing
forward references is left blank initially.
• A table of instruction containing forward
references is maintained separately called table
of incomplete instruction (TII).
• This table can be used to fill up the addresses in
incomplete instruction.
• The address of the forward referenced symbols is
put in the blank field with the help of back
patching list

General Design Procedure of Two Pass
Assembler
1. Specify the problem
2. Specify data structures
3. Define format of data structures
4. Specify algorithm
5. Look for modularity [capability of one
program to be subdivided into independent
programming units.]
6. Repeat 1 through 5 on modules.

Specify the problem pass l
Pass1: Define symbols & literals.
1) Determine length of m/c instruction [MOTGET1]
2) Keep track of Location Counter [LC]
3) Remember values of symbols [STSTO]
4) Process some pseudo ops[EQU,DS etc] [POTGET1]
5) Remember Literals [LITSTO]

Specify the problem pass ll
Pass2: Generate object program
1) Look up value of symbols [STGET]
2) Generate instruction [MOTGET2]
3) Generate data (for DS, DC & literals)
4) Process pseudo ops[POTGET2]

Step 2. Data structure:-
Pass1: Databases
• Input source program
• “LC” location counter used to keep track of each instructions addr.
• M/c operation table (MOT) contain a field [mnemonic opcode,
class and mnemonic information (information code of IS, length)]
• Pseudo operation table [POT] contain a field [mnemonic opcode,
class and mnemonic information (R#routine number)]
• Symbol Table (ST or SYMTAB) to store each lable & it’s value.
• Literal Table (LT or LTTAB), to store each literal (variable) & it’s
location.
• Literal Pool Table (POOLTAB)
• Copy of input to used later by PASS-2.

MOT+POT=OPTAB
• OPTAB contains the field mnemonics opcodes,
class and mnemonics info.
• The class field indicates whether the opcode
belongs to an imperative statement (IS), a
declaration statement (DS), or an assembler
directive (AD).
• If an imperative, the mnemonics info field
contains the pair (machine code, instruction
length), else it contains the id of a routine to
handle the declaration statement or assembler
directive statement

Mnemonic Operation Table (OPTAB)
Mnemonics Opcode Class Mnemonics information
START AD R#1
MOVER IS (04,1)
MOVEM IS (05,1)
ADD IS (01,1)
BC IS (07,1)
LTORG AD R#5
SUB IS (02,1)
STOP IS (00,1)
ORIGIN AD R#3
MULT IS (03,1)
DS DL R#7
EQU AD R#4
END AD R#2

Machine opcode table (MOT)
MOVER IS (04,1)
MOVEM IS (05,1)
ADD IS (01,1)
BC IS (07,1)
SUB IS (02,1)
STOP IS (00,1)
MULT IS (03,1)
M/c operation table (MOT) contain a field
[mnemonic opcode, class and mnemonic
information (information code of IS, length)]

Pseudo operation table (POT)
• Pseudo operation table [POT] contain a field
[mnemonic opcode, class and mnemonic
information (R#routine nomber)]
START AD R#1
LTORG AD R#5
ORIGIN AD R#3
DS DL R#7
EQU AD R#4
END AD R#2

Symbol Table (SYMTAB)
Index no. Symbol Address Length
1 LOOP 202 1
2 NEXT 214 1
3 LAST 216 1
4 A 217 1
5 BACK 202 1
6 B 218 1
•A SYMTAB entry contains the symbol name, field address and length.
•Some address can be determining directly, e.g. the address of the
first instruction in the program, however other must be inferred.
•To find address of other we must fix the addresses of all program
elements preceding it. This function is called memory allocation

Literal Table (LITTAB)
Index no. Literal Address
1 =‘5’ 211
2 =‘1’ 212
3 =‘1’ 219
•A table of literals used in the program.
•A LITTAB entry contains the field literal and address.
•The first pass uses LITTAB to collect all literals used in a program

Pool Table (POOLTAB)
Literal no.
#1
#3
•Awareness of different literal pools is maintained using the
auxiliary table POOLTAB.
•This table contains the literal number of the starting literal of
each literal pool.
•At any stage, the current literal pool is the last pool in the LITTAB.
•On encountering an LTORG statement (or the END statement),
literals in the current pool are allocated addresses starting with
the current value in LC and LC is appropriately incremented.

Step 2. Data structure:-
• Pass2: Databases
• Copy of source program input to Pass1.
• Location Counter (LC)
• MOT [Mnemonic, length, binary m/c op code, etc.]
• POT [Mnemonic & action to be taken in Pass2
• ST [prepared by Pass1, label & value]
• Base Table [or register table] indicates which registers
are currently specified using ‘USING’ pseudo op & what
are contents.
• Literal table prepared by Pass1. [Lit name & value].

Format of Data Structures pass l
• Intermediate Code
• Intermediate code consist of a set of IC units,
each unit consisting of the following three fields
• 1.Address
• 2.Representation of mnemonics opcode
• 3.Representation of operands
• Intermediate code can be in variant I or variant II
form

Variant l
• Mnemonics field
• The mnemonics field contains a pair of the form
– (statement class, code)
– Where statement class can be one of IS, DL, and AD
• For imperative statement, code is the instruction
opcode in the machine language.
• For declarations and assembler directives, code is
an ordinal number within the class.
• (AD, 01) stands for assembler directive number 1
which is the directive START

Variant I
Declaration
statement
Instruction
code
DC 01
DS 02
Assembler
directive
Instruction
code
START 01
END 02
ORIGIN 03
EQU 04
LTORG 05
Imperative statements
(mnemonics)
Instruction
code
STOP 00
ADD 01
SUB 02
MULT 03
MOVER 04
MOVEM 05
COMP 06
BC 07
DIV 08
READ 09
PRINT 10
JUMP 11

Variant I
Condition Instruction
code
LT 1
LE 2
EQ 3
GT 4
GE 5
ANY 6
Register Instruction
code
AREG 1
BREG 2
CREG 3
DREG 4
•First operand is represented by a single digit number which is a code for a register or
the condition code
•The second operand, which is a memory operand, is represented by a pair of the form
(operand class, code)
•Where operand class is one of the C, S and L standing for constant, symbol and literal
For a constant, the code field contains the internal representation of the constant itself.
Ex: the operand descriptor for the statement START 200 is (C,200).
For a symbol or literal, the code field contains the ordinal number of the operand’s
entry in SYMTAB or LITTAB

Variant ll
• This variant differs from variant I of the intermediate
code because in variant II symbols, condition codes and
CPU register are not processed.
• So, IC unit will not generate for that during pass I.
Variant I Variant II
IS, DL and AD all statements
contain processed form.
DL and AD statements contain processed
form while for Is statements, operand
field is processed only to identify literal
references.
Extra work in pass I Extra work in pass II
Simplifies tasks in pass II Simplifies tasks in pass I
Occupies more memory than
pass II
Memory utilization of two passes gets
better
balanced.

Intermediate Code Forms
• Comparison of Variant-I and Variant-II
– Memory requirement using Variant-I andVariant-II.
Pass-II
Pass-I
Data
Structure
Work
area
Data
Structure
Work
area
Pass-I
Data
Structure
Work
area
Pass-II
Data
Structure
Work
area
14
0
Variant I Variant II

(AD,1) (C,200) (AD,1) (C,200)
(IS,4) (1) (L,1) (IS,4) AREG (L,1)
(IS,5) (1) (S,4) (IS,5) AREG (S,4)
(IS,4) (1) (S,4) (IS,4) AREG (S,4)
(IS,4) (3) (S,6) (IS,4) CREG (S,6)
(IS,1) (3) (L,2) (IS,1) CREG (L,2)
(IS,7) (6) (S,2) (IS,4) ANY, NEXT
(AD,5) (AD,5)
(L,1) (L,1)
(L,2) (L,2)
(IS,2) (1) (L,3) (IS,2) AREG (L,3)
(IS,7) (1) (S,5) (IS,7) LT, BACK
(IS,00) (IS,00)
(AD,3) (S,1)+2 (AD,3) LOOP+2
(IS,3) (3) (S,6) (IS,3) CREG ,B
(AD,3) (S,3)+1 (AD,3) LAST+1
(DL,02) (C,1) (DL,02) A
(AD,04) (S,1) (AD,04) (S,1)
(DL,02) (C,1) (DL,02) B
(AD,02)
(L,3) (L,3)
Stmt no Lable mn operands LC sign op- Reg Memory Var I Var II
opcode code ope. Ope.

Format of Data Structures pass ll
Machine Instruction Format
Ex : + 09 0 113
• Opcode, reg.operand and Memory Operand occupy 2,1,and 3 digits.
• This is a Machine code which will produce by assembler.

Pass – I of ASSEMBLER
Flow Chart

Pass – llof ASSEMBLER
Flow Chart

Error reporting of assembler
• Error reporting in pass I
• Listing an error in first pass has the advantage that source program
need not be preserved till pass II.
• But, listing produced in pass I can only reports certain errors not all.
• From the below program, error is detected at statement 9 and 21.
• Statement 9 gives invalid opcode error because MVER does not
match with any mnemonics in OPTAB.
• Statement 21 gives duplicate definition error because entry of A is
already exist in symbol table.
• Undefined symbol B at statement 10 is harder to detect during pass
• I, this error can be detected only after completing pass I

Error Table
Error reporting in pass II
•During pass II data structure like SYMTAB is available.
•Error indication at statement 10 is also easy because symbol table is searched for an
entry B.
•if match is not found, error is reported

Assembly Program to compute N! & write
its intermediate code and machine code

Unit 3 sp assembler

More Related Content

What's hot (20)

Similar to Unit 3 sp assembler (20)

Recently uploaded (20)

Unit 3 sp assembler