Npm s1000 specsheet
0 likes166 views
This document provides specifications for three linear shaft motors: the S1000D, S1000T, and S1000Q. It includes electrical specifications like continuous and peak force and current, as well as mechanical specifications such as forcer length, width, weight, and gap. Graphs show the force-duty curve for the S1000D and S1000Q motors. Contact and ordering information is provided for the manufacturer.
![Linear Shaft Motor
Right Left
Left
Right
Electrical Specifications
S1000D S1000T S1000Q
Sold & Serviced By:
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Continuous Force1 1056N (267lbs) 1591N (358lbs) 2125N (488lbs)
Continuous Current1 7.9Arms 11.9Arms 15.9Arms
Peak Force2 4225N (950lbs) 6364N (1431lbs) 8503N (1912lbs)
Peak Current2 31.6Arms 47.6Arms 63.6Arms
Force Constant Kf 133.7N/Arms (29.9lbs/Arms) 133.7N/Arms (29.9lbs/Arms) 133.7N/Arms (29.9lbs/Arms)
Back EMF 44.57V/m/s (1.31V/in/s) 44.57V/m/s (1.31V/in/s) 44.57V/m/s (1.31V/in/s)
Resistance 20°C, 3 2.0 1.3 1.0
Inductance3 9.8mH 6.5mH 4.9mH
Electrical Time Constant 4.9ms 5.0ms 4.9ms
Fundamental Motor Constant 94.54NW 117.26NW 133.7NW
Magnetic Pitch (North-North) 270mm (10.6in) 270mm (10.6in) 270mm (10.6in)
All specifications are for reference only. Specifications may change depending on servo driver selected. Consult Nippon Pulse America.
1) Based on a temp rise of coil surface of 40°K over 25°C ambient temperature stalled forcer, and no external cooling or heat sinking.
Addition of 25 cm x 25 cm x 2.5 cm aluminum heat sink increases continuous force by 20%.
2) Can be maintained for a maximum of 40 seconds, consult Nippon Pulse America.
3) All winding parameters listed are measured line-to-line (phase-to-phase).
Thermal Specifications
S1000D S1000T S1000Q
Max phase temperature4 65°C (149°F) 65°C (149°F) 65°C (149°F)
Thermal Resistance (Coil) Kq 0.32°C/W 0.22°C/W 0.16°C/W
4) The standard temperature difference between the coil and the forcer surface is 40°C
Forcer
S1000D S1000T S1000Q
Forcer Length A 364mm (14.33in) 499mm (19.64in) 634mm (24.96in)
Forcer Width 200mm (7.87in) 200mm (7.87in) 200mm (7.87in)
Forcer Screw Pitch P
Forcer Weight 37kg ( 81.6lbs) 55kg ( 121lbs) 73kg (161lbs)
Gap 1.2mm (0.047in) 1.2mm (0.047in) 1.2mm (0.047in)
Temp
Rise
ELECTROMATE
2008/1/1
S1000
Mechanical Specifications
Force - Duty Curve
S1000D
12000
10000
8000
6000
4000
2000
0
0 20 40 60 80 100
Duty(%)
Force (N)
Temp
Rise
10°C
20°C
30°C
40°C
Force - Duty Curve
S1000Q
25000
20000
15000
10000
5000
0
0 20 40 60 80 100
Duty(%)
Force (N)
10°C
20°C
30°C
40°C
UNLESS OTHERWISE
SPECIFIED:
Dimensions are in MM [IN]
Tolerances are as follows:
Dimension mm
- 6
7 - 30
31 - 120
121 - 315
316 - 1000
1001 - 2000
2000 - .
Tolerance mm
±0.1
±0.2
±0.3
±0.5
±0.8
±1.2
±1.5
L = See Shaft Length
L1 = Usable Stroke + A
L2 = See Shaft Support Length
A = See Moving Coil Length
P = See Moving Coil Screw Pitch
Nippon Pulse America, Inc. S1000](https://image.slidesharecdn.com/npms1000specsheet-141018124152-conversion-gate01/85/Npm-s1000-specsheet-1-320.jpg)
Npm s1000 specsheet
- 1. Linear Shaft Motor Right Left Left Right Electrical Specifications S1000D S1000T S1000Q Sold & Serviced By: Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Continuous Force1 1056N (267lbs) 1591N (358lbs) 2125N (488lbs) Continuous Current1 7.9Arms 11.9Arms 15.9Arms Peak Force2 4225N (950lbs) 6364N (1431lbs) 8503N (1912lbs) Peak Current2 31.6Arms 47.6Arms 63.6Arms Force Constant Kf 133.7N/Arms (29.9lbs/Arms) 133.7N/Arms (29.9lbs/Arms) 133.7N/Arms (29.9lbs/Arms) Back EMF 44.57V/m/s (1.31V/in/s) 44.57V/m/s (1.31V/in/s) 44.57V/m/s (1.31V/in/s) Resistance 20°C, 3 2.0 1.3 1.0 Inductance3 9.8mH 6.5mH 4.9mH Electrical Time Constant 4.9ms 5.0ms 4.9ms Fundamental Motor Constant 94.54NW 117.26NW 133.7NW Magnetic Pitch (North-North) 270mm (10.6in) 270mm (10.6in) 270mm (10.6in) All specifications are for reference only. Specifications may change depending on servo driver selected. Consult Nippon Pulse America. 1) Based on a temp rise of coil surface of 40°K over 25°C ambient temperature stalled forcer, and no external cooling or heat sinking. Addition of 25 cm x 25 cm x 2.5 cm aluminum heat sink increases continuous force by 20%. 2) Can be maintained for a maximum of 40 seconds, consult Nippon Pulse America. 3) All winding parameters listed are measured line-to-line (phase-to-phase). Thermal Specifications S1000D S1000T S1000Q Max phase temperature4 65°C (149°F) 65°C (149°F) 65°C (149°F) Thermal Resistance (Coil) Kq 0.32°C/W 0.22°C/W 0.16°C/W 4) The standard temperature difference between the coil and the forcer surface is 40°C Forcer S1000D S1000T S1000Q Forcer Length A 364mm (14.33in) 499mm (19.64in) 634mm (24.96in) Forcer Width 200mm (7.87in) 200mm (7.87in) 200mm (7.87in) Forcer Screw Pitch P Forcer Weight 37kg ( 81.6lbs) 55kg ( 121lbs) 73kg (161lbs) Gap 1.2mm (0.047in) 1.2mm (0.047in) 1.2mm (0.047in) Temp Rise ELECTROMATE 2008/1/1 S1000 Mechanical Specifications Force - Duty Curve S1000D 12000 10000 8000 6000 4000 2000 0 0 20 40 60 80 100 Duty(%) Force (N) Temp Rise 10°C 20°C 30°C 40°C Force - Duty Curve S1000Q 25000 20000 15000 10000 5000 0 0 20 40 60 80 100 Duty(%) Force (N) 10°C 20°C 30°C 40°C UNLESS OTHERWISE SPECIFIED: Dimensions are in MM [IN] Tolerances are as follows: Dimension mm - 6 7 - 30 31 - 120 121 - 315 316 - 1000 1001 - 2000 2000 - . Tolerance mm ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±1.5 L = See Shaft Length L1 = Usable Stroke + A L2 = See Shaft Support Length A = See Moving Coil Length P = See Moving Coil Screw Pitch Nippon Pulse America, Inc. S1000