Seminar report on Vactrain

SEMINAR REPORT ON- VACTRAINS
A Vacuum Tunnel Technology for Trains
Under the Guidance of:
Prof. (Dr.) I.K. Pandita
Date : 15/06/2015
Submitted by:
Name : Punit Chainwal
Enroll. No. : 182/12
Roll No. : 31
Semester : 6th
Branch : Mechanical

i | P a g e
Abstract
Vacuum Train refers to a proposed means of high speed long-haul transportation
involving the use of Magnetic Levitation Trains in an evacuated tunnel. My
seminar was aimed for investigating the idea in more detail and quantifying some
of the challenges involved. Although, several studies on similar ideas exist, a
consolidated report documenting all past research and approaches involved is
missing.

ii | P a g e
Acknowledgements
Firstly I would like to thank my best friend Jagmohan Singh (B. Tech Student, 4th
year, Mechanical Branch, IIT Mandi) for giving me every possible support to prepare
my seminar on Vactrains. I am also thankful to my roommates who helped me to
improve my English language.
Punit Chainwal

iii | P a g e
Contents
Page No.
Abstract………………………………………………………………………………i
Acknowledgement…………………………………………………………………...ii
List of Figures……………………………………………………………………….iv
S. No. Title
1. Introduction 1
2. History of Vactrain 2
3. Technology 3
3.1 Maglev Trains 3
3.1.1 Levitation 4
3.1.2 Propulsion 4
3.1.3 Guidance 5
3.2 The Tube Tunnel 6
3.3 Creating and Maintaining Vacuum 8
3.4 Aerodynamic Drag 9
4. Effect of High speed Travel on the Human Body 10
4.1 G Force 10
4.2 G Force Calculation: Trans-Atlantic Route 12
5. Advantages 13
5.1 High Speed 13
5.2 Low Power Consumption 13
5.3 Eco- Friendly 13
5.4 Weather Proof 14
6. Disadvantages 14
6.1 High Initial Cost 14
6.2 Earthquakes 14
7. Running Projects 15
7.1 The SwissMetro 15
7.2 The Trans-Atlantic Tunnel 16
8. Conclusion 17
9. References 18

iv | P a g e
List of Figures
S. No. Title Page No.
1. A Vactrain Over the Bridge 1
2. History of Vactrain 2
3. Functions of the maglev 3
4. EMS and EDS Maglev 4
5. Propulsion and Guidance of Maglev 5
6. Proposed Tube Tunnel Section 6
7. Left: Anchored Tethers, 7
Right: Cross-section of Tunnel.
8. Immersion Pontoon Lowering Tube Section 7
9. Pressure waves in a tunnel 9
10. G-Forces 10
11. Time vs Acceleration Graph 11
12. Proposed velocity curve 12
13. The Swissmetro 15
14. The Trans-Atlantic Tunnel 16

1 | P a g e
1. Introduction
Have you ever been on an 8 hour flight from New York to London, and dreamt how
much easier life would have been if the travel time was only an hour? The Vacuum
train is a fascinating proposal that would make this dream possible by its ability to
attain speeds around 8000 km/h. In the larger context, the Vacuum train might be the
next biggest step in the transportation industry after the invention of the aircraft.
Vactrain or Vacuum Tube Train is a proposed design for very high speed train
transportation. Vactrain is involving the use of Magnetic Levitation Trains in an
evacuated tunnel and takes it to the next level by implementing it in an evacuated
tunnel. The idea is to travel very large distance in a very short time.
In the initial part of the report, I explained the working of each of the subsystems; the
Maglev and the evacuated tunnels. I assessed the effects that high-speed travel might
have on the human body.
Figure 1: A Vactrain Over the Bridge
(Source: www.jumpstartfund.com)

2 | P a g e
2. History of Vactrains
The concept of Vactrains is not a recent one. Proposals have been made for a non-
evacuated transatlantic tunnel which would link the United States and Great Britain.
This idea was also highlighted in the German film, Der Tunnel which came out in
1933.
Figure 2: History of Vactrain
(Source: www.scientificamerican.com)
The modern concept of the Vactrain, as it is understood today, consisting of evacuated
tubes and involving maglev technology was first proposed by American engineer
Robert Goddard (Wikipedia). His documents on Vactrains too were discovered after
his death. According to the train designs which were found after his death in 1945, his
train would travel from Boston to New York in 12 minutes at a speed of 1000 mph.
There have been recent proposals on Vactrains by Frank Davidson, a pioneer of the
Channel Tunnel project and Yoshihiro Kyonati, a Japanese Engineer, who tackled
transoceanic problems by floating a tube above the ocean floor, anchored with cables.
This tube was proposed to be at a depth of 100 feet from the ocean surface to avoid
water turbulence.

3 | P a g e
3. Technology
3.1 Maglev (Magnetic Levitation) Trains
Magnetic Levitation trains, more commonly called the maglev, are a highly
innovative form of high speed transportation.
As the name suggests, the train is levitated above the track with the help of magnets
and runs on the principle of electromagnetism. There exists no friction between the
track and the train.
There are three main functions that each of the maglev technologies performs, which
is shown in Figure 3.
i. Levitation
ii. Propulsion
iii. Guidance
Figure 3: Functions of the maglev
(Source: “WPI Feasibility and Economic Aspects of Vactrains”-PDF)

4 | P a g e
3.1.1 Levitation
The first task of a maglev system is to get off the track and stay suspended which is
achieved through levitation. The two primary maglev technologies, EMS and EDS,
are distinguished primarily based on their methods of levitation.
3.1.2 Propulsion
In the EMS system, the train also propels forward using the same principle. However,
the magnets used for levitation and the ones used for propulsion are completely
different. When the magnets that are placed on the guide way are activated, they are
attracted to the magnets that are under the maglev. The activated electromagnets of
the guide way are just in front of the maglev and hence they tend to pull the maglev in
the forward direction.
The EDS system uses a Linear Synchronous Motor (LSM) to generate a magnetic
field that follows the guide way. In this system, the activated sections of the guide
way attract the on board superconducting magnets, and once the polarity changes
they repel hence pushing the vehicle. The train can be slowed down by reversing
the magnetic field.
Figure 4: EMS and EDS Maglev

5 | P a g e
Figure 5: Propulsion and Guidance Maglev
(Source: www.wikipedia.org/Maglev)
3.1.3 Guidance
A maglev train would be unstable if it were to be levitated and propelled just
using magnets. There is a need to keep the train stable. Hence, guidance magnets
are used to make sure that the train is completely stable. The guidance magnets
are on the side of the train and there exists a system that automatically adjusts the
current in the electromagnet based on the distance between the guide way and the
train to maintain a constant distance.

6 | P a g e
3.2 The Tube Tunnel
This method was envisioned by MIT researchers Ernest Frankel and Frank
Davidson. It involves constructing a tube-like tunnel about 150 feet below sea
level and anchoring it to the ocean floor using tether cables.
Figure 6: Proposed Tube Tunnel Section
(Source: Ceasefire Magazine)
The first challenge would be to construct the 54,000 prefabricated tube sections. The
sections may be made of stainless steel with an outer gasket of thick super-buoyant
foam.
Figure 7: Left: Anchored Tethers, Right: Cross-section of Tunnel.
(Source PDF - “WPI Feasibility and Economic Aspects of Vactrains”)

7 | P a g e
The prefabricated sections would then be transported to construction sites using
specialized ships called Immersion Pontoons. These sections, when all joined
together would form an airtight tube between the two destinations. The tube is to
have separate tracks for two-way transport along with an auxiliary track for
emergencies/servicing. Utility ducts will run through the tube to provide for the
significant power requirements of both the Maglev and the vacuum pumps for the
tube.
Figure 8: Immersion Pontoon Lowering Tube Section
Next the sections would be lowered to the required depths and assembled
underwater and anchored to the ocean floor at a depth of about 150-300 feet
below sea level. It is estimated that over 100,000 tether cables would be required
for a trans-Atlantic tunnel. These prefabricated sections would each need to be
connected together in an airtight seal. This could be achieved by underwater
welding operations
Once the entire tube has been assembled, heavy duty vacuum pumps will be used
to evacuate the tube tunnel and maintain it at the desired level of air density.

8 | P a g e
3.3 Creating and Maintaining Vacuum
For successfully creating and maintaining a vacuum, two basic things need to be
done.
i. Removal of matter from the tube.
ii. Prevention of leakage, that is, re-entry of matter back into the
tube.
For removing gases and air, from a tube, air needs to be pumped out using vacuum
pumps. By definition, vacuum pumps suck process vapours into the pump by utilizing
pressure differentials.
The first part is relatively easy and air removal goes smoothly for the first few days.
The problem arises due to the condensable molecules, like water vapour and
hydrocarbons. These molecules tend to stick lightly onto the stainless steel walls of
the Beam Tube. The problem is that these molecules keep coming off the walls and
spoiling the vacuum inside the tube. In order to speed up this process, the entire tube
is heated up so that the hydrocarbons can gain thermal energy and be excited enough
to move away from the walls
Next, Turbo Pumps at each end of the tube pumped non-condensable gases, like
hydrogen, while eight Cryo-Pumps were spaced out along the tube to pump the
condensable molecules.

9 | P a g e
3.4 Aerodynamic Drag
It is resistance to motion due to air. Aerodynamic drag is much more in a tunnel than
in open air. In tunnels it includes pressure waves, which propagate through the tunnel
with the speed of sound.
Figure 9: Pressure waves in a tunnel
Figure 9 shows the generation of pressure waves while a train enters a tunnel and the
reflection at the end of the tunnel. Figure 9 (a) shows a compression wave labeled as 1
produced at the entrance of the train. Figure 9 (b) shows an expansion wave, labelled
as 2 produced at the entrance of the tail of the train. Figure 9 (c) shows the reflection
of both the waves at the downstream opening of the tunnel. U1 stands for train speed
and c stands for the speed of sound.

10 | P a g e
4. Effects of High Speed Travel on the Human Body
Another major constraint on the Vactrain’s design is passengers’ comfort. It is
essential to make sure the passengers are at ease throughout their journey. We cannot
have the Vactrain travelling at soaring speeds and accelerating fast if the human body
cannot withstand it.
Research in the past years has shown that speed in itself has no effect on the
organism. The human body can tolerate any speed in the earth or space. What matters
is, the time taken to reach that speed, in other words, the acceleration. This is also
shown by Newton’s second law of motion which states that-
F = m a
Thus, more the acceleration more the force acting on the body.
4.1 G Force
G-Force is a term used commonly by aviators, astronauts and race-car drivers. It is the
measure of the net effect of the acceleration that a body experiences and the
acceleration that gravity is trying to impart to it. The ‘net effect’ can be best described
as the vector difference between the acceleration due to gravity and the acceleration
the body is actually experiencing. It comes in role when we travel at very high speed.
A person feeling a force of 4gs feels 4 times as heavy as his normal weight
Figure 10: G-Forces

11 | P a g e
The proposed velocities for the Vactrain are as high as 5000 mph.This section
considers some cases of acceleration for the Trans-Atlantic route and tries to quantify
the effect of the acceleration, i.e. the G-force, on passengers travelling in the train.
Given the Vactrain model, it would be best if G-forces on passengers could be
minimized. By designing a straight line path between destinations, it would be easy to
eliminate lateral and vertical G-force.
Figure 11: Time vs Acceleration Graph
The graph in Figure 17shows how effects of acceleration on the body depend on both
its magnitude and the duration for which the body is subjected to it. Curve A shows
that even though the body is subjected to an acceleration of 7.5 Gs approximately, no
symptoms or effects are seen. This is because the body is accelerated and decelerated
back in a very short period of time. Curve B shows that a body is accelerated to as
high as 9 Gs and still there is no visible effect. However, if it is kept under the same
acceleration, the body is not able to withstand it for long and within seconds, loss of
consciousness occurs. Curves C and D show constant rates of increase in acceleration.
The rates here are relatively slow and visual symptoms are seen for a short time
before loss of consciousness occurs.
B
1

12 | P a g e
4.2 G Force Calculations: Trans-Atlantic Route
To make the New-York – London trip in under an hour, the average speed of the
Vactrain is estimated at 5000 miles/hour (or 8045 km/hr). Assuming that we want to
reach topspeed in the first 5 minutes of the journey and then maintain that for the rest
of the trip.
The Velocity curve for the trip will look as shown in Figure 12.
Figure 12: Proposed velocity curve
For such a velocity curve, the G-force experienced in the first five minutes can be
estimated by calculating the acceleration and expressing it as a ratio of the earth’s G
(9.8 m/s2
).

13 | P a g e
This result indicates that going from zero to top-speed in 5 minutes will result in a
transverse G-Force of only 0.76G.
In the case of a very sudden change of velocity, the experienced G-Force will be
higher. This could be due to some sort of failure or emergency break mechanism in
the train. To go from top speed to zero in 5 seconds, the experienced g-force will be:
Research shows that the human body is capable of surviving G’s in this range.
However safety levels need to be set conservatively to avoid any potential accidents.
We rotate the chairs of Vactrains when we accelerate or deaccelerate gradually to
eliminate G-Force. Because when chairs rotate then G-Force distributes to all over
body and these forces apply to several parts of body for very short time hence there is
no danger of these G-Forces.
5. Advantages of Vactrains
5.1 High speed:
It eliminates aerodynamic drag to attain speed approximately 5000mph. It
feels like space travel on earth.
5.2 Low Power Consumption:
We use Maglev Train in an evacuated tunnel. We eliminated friction as well as
aerodynamic drag so there is possibility to save input power. There is no use of
oils to operate Maglev issue of foreign oil dependency.
5.3 Ecofriendly:
There is no emission of pollutant gases like CO2, CO etc. because Vactrain is
powered by electrically. Hence Vactrain will not pollute our environment if we
run commercially.

14 | P a g e
5.5 Weather Proof:
Vactrain will run through the evacuated tunnels, in complete journey there is
shield of tunnel so there is no bad weather issue like heavy snow fall, raining,
fog etc. Also, weather will not affect material of train
.
6. Disadvantages of Vactrains
6.1 High Initial Cost:
Estimating the cost of such an enormous project is a difficult task. So that
we may obtain a general idea of the costs involved, our aimed at determining
the cost of a Vactrain.
The main barriers to constructing such a tunnel are cost with estimates of
between $175 billion to $12 trillion as well as the limits of current materials
science (Wikipedia).
6.2 Earthquakes:
Earthquake is a big challenge for Vactrains. It would very difficult to recover
cost after this disaster. For under the ocean and ground there are generation of
waves continuously which results earthquakes.

15 | P a g e
7. Running Projects
7.1 The Swissmetro
The Swissmetro is a project that should be implemented in the next 15
years if everything goes according to plan. The Swiss metro is a maglev
train that would run underground in partial vacuum connecting major
cities across Switzerland. There would be a train leaving every 6 minutes
making it a high frequency- high speed train.
Figure 13: The Swissmetro
(Source: www.futurima.wordpress.com)

16 | P a g e
7.2 The Trans-Atlantic Tunnel
A transatlantic tunnel is a theoretical tunnel that would span the Atlantic Ocean
between North America and Europe possibly for such purposes as mass transit.
Some proposals envision technologically advanced trains reaching speeds of 500
to 8,000 kilometres per hour (310 to 4,970 mph). Most conceptions of the tunnel
envision it between the United States and the United Kingdom ‒ or more
specifically between New York City and London. At least one conception of the
tunnel envisions it between New York City and Lisbon.
Existing major tunnels, such as the Channel Tunnel, Seikan Tunnel and the
Gotthard Base Tunnel, despite using less expensive technology than any yet
proposed for the transatlantic tunnel, struggle financially.
Fig 14: The Trans-Atlantic Tunnel
(Source: www.maglev.net)

17 | P a g e
8. Conclusion
In this seminar report, I have tried to consolidate the idea of the Vactrain from its
conceptualization in 1945 by Robert Goddard as a university student to its current
status and future implications. A Vactrain has several advantages which make it a
revolutionary idea but it is not without its set of drawbacks which are preventing it
from turning into reality.
It is thus safe to say that if the Vactrain becomes a reality, it will lead to a decline in
the most superior mode of transport at present, namely aircrafts. Not only is the
Vactrain much faster but also overcomes most of the disadvantages of aircrafts and
other modes of transport. Initially, the ticket prices might prevent a wide clientele, but
over time, these issues can be fixed and the Vactrain could possibly be the next big
step in the transportation industry.

18 | P a g e
9. References
1. Vactrain.
http://en.wikipedia.org/wiki/Vactrain
Retrieved on April 13, 2015.
2. PDF - “WPI Feasibility and Economic Aspects of Vactrains” by Alihusain Yusuf
Sirohiwala, Ananya Tondon and Raj Vysetty,
3. Magnetic Levitation Train.
http://en.wikipedia.org/wiki/Magnetic_Levitation_Train
Retrieved on November April 08, 2015.
4. The Transatlantic Tunnel.
http://en.m.wikipedia.org/wiki/Tansatlantic_tunnel
5. G Force.
http://en.wikipedia.org/G-force
6. Study of the Swissmetro (1994-1998).
http://swissmetro.ch/downloads/studien/schlussbericht_eng.pdf
Retrieved on April 13, 2015
7. Tunnels.
http://en.wikipedia.org/wiki/Tunnel

Seminar report on Vactrain

More Related Content

What's hot (20)

Viewers also liked (6)

Similar to Seminar report on Vactrain (20)

Recently uploaded (20)

Seminar report on Vactrain