TTACCA: TWO-HOP BASED TRAFFIC AWARE CONGESTION CONTROL ALGORITHM FOR WIRELESS SENSOR NETWORKS

Natarajan Meghanathan et al. (Eds) : NeTCoM, CSIT, GRAPH-HOC, SPTM - 2014
pp. 185–194, 2014. © CS & IT-CSCP 2014 DOI : 10.5121/csit.2014.41315
TTACCA: TWO-HOP BASED TRAFFIC
AWARE CONGESTION CONTROL
ALGORITHM FOR WIRELESS SENSOR
NETWORKS
Prabha R1
, Prashanth Kumar Gouda1
, Manjula S H1
, K R Venugopal1
and L M Patnaik2
1
Department of Computer Science and Engineering,
University Visvesvaraya College of Engineering
Bangalore University, Bangalore, India
2
Honorary Professor, Indian Institute of Science, Bangalore 560 001, India
heshakil@yahoo.com, prashanth333.ece@gmail.com,
shmanjula@gmail.com,
venugopalkr@gmail.com,patnaiklm@cedt.iisc.ernet.in
ABSTRACT
Congestion in Wireless Sensor Networks has negative impact on the Quality of Service.
Congestion effects the performance metrics, namely throughput and per-packet energy
consumption, network lifetime and packet delivery ratio. Reducing congestion allows better
utilization of the network resources and thus enhances the Quality of Service metrics of the
network. Traffic Aware Dynamic Routing to Alleviate Congestion in Wireless Sensor Networks
reduces congestion by considering one hop neighbor routing in the network. This paper
proposed an algorithm for Quality of Service Based Traffic-Aware Data forwarding for
congestion control in wireless sensor networks based on two hop neighbor information. On
detection of congestion, the algorithm forwards data packets around the congestion areas by
spreading the excessive packets through multiple paths. The path with light load or under
loaded nodes is efficiently utilized whenever congestion occurs. The main aspect of the
algorithm is to build path to the destination using two independent potential fields depth and
queue length. Queue length field solves the traffic-aware problem. Depth field creates a
backbone to forward packets to the sink. Both fields are combined to yield a hybrid potential
field to make dynamic decision for data forwarding. Network Simulator used for simulating the
algorithm is NS2. The proposed algorithm performs better.
KEYWORDS
Congestion Control, Depth Potential Field, Queue Length Potential Field, Traffic-Aware,
Wireless Sensor Networks.
1. INTRODUCTION
Wireless Sensor Networks (WSN) are emerged as an innovative technology which are applied in
a wide range of areas like environment monitoring, military, medical systems etc.. The main
task of any WSN is to collect and process information in a coordinated way in the region of

186 Computer Science & Information Technology (CS & IT)
deployment and deliver the data to the sink node via the communication path. Quality of
Service (QoS) requirements in WSN differs from wired networks. The existing researches related
to the QoS in WSN are classified into three categories: (i) traditional end-to-end QoS, (ii)
reliability assurance, and (iii) application-specific QoS. In case of wired networks QoS routing is
performed usually through resource reservation. WSN networks characteristics such as loose
network state information, dynamically varying network topology, unrestricted mobility of hosts,
and limited availability of bandwidth and battery power make QoS very demanding. While
performing a certain task in WSN, when the data traffic becomes heavier in sensor node, packets
are stored in the buffer. When the buffer reaches to threshold level, there will be traffic at the
node for the data packets. These results in increased contention, increased retransmissions,
decreased packet delivery ratios and increased energy consumption. Data loss due to congestion
ultimately threatens the Quality of Service parameters namely throughput, packet delivery ratio,
latency and energy efficiency. Congestion in the network threatens the network performance [1].
2. MOTIVATION
Traffic-Aware Dynamic Routing to Alleviate Congestion in Wireless Sensor Networks
(TADR) [2] work focused on alleviating the congestion in keeping view of fidelity level of
the applications as the data generated during crisis state is more important. Whenever there
is congestion in the network, congestion is handled by scattering the excessive packets to
alternative paths with less load. The main drawbacks of TADR are more energy
consumption and throughput is less due the one hop neighbour information used for
congestion control.
3. CONTRIBUTION
The QoS parameters emphasized in this paper are throughput, delay and energy. The objective of
our Two-hop based Traffic Aware Congestion Control Algorithm (TTACCA) for Wireless Sensor
Network is to alleviate congestion and improve throughput by distributing packets in both
time and space. Two independent potential fields Depth field and Queue length fields plays
an major role in the network to control the congestion due the occurrence of an event. The
proposed algorithm works based on two-hop routing technique.
4. RELATED WORK
This section provides a brief overview of existing congestion control techniques. Congestion
control in WSN has gained high importance in the field of research. Muhammad et al., [3]
proposed a Prioritized Heterogeneous Traffic-oriented Congestion Control Protocol which
performs hop-by-hop rate adjustment controlling the congestion and ensures efficient rate for the
prioritized diverse traffic. This protocol uses intra-queue and inter-queue priorities along with
weighted fair queuing for ensuring feasible transmission rates of Farooq et al., [4] came up
with an algorithm that takes a novel and different approach towards congestion control in wireless
multimedia sensor networks.Upon detection of congestion, the congested node makes an
estimate of the data rate that should be used by the node itself and its one hop away upstream
neighbours. While estimating the data rate, the congested node considers the characteristics of
the different traffic classes along with their total bandwidth usage. Sohail et al., [5] designed
Congestion Control Protocol for mobile sensor networks. It uses the existing TDMA technique
with combination of statistical Time Division Multiplexing and enhanced newly proposed
Time Sharing Time Division Multiple Access scheme to avoid congestion in WSN. Charalambos
et al., [6], proposed two methods to tackle congestion in WSNs. The two methods are either by
reducing the load or by increasing resources. Hierarchical Tree Alternative Path algorithm is

Computer Science & Information Technology (CS & IT) 187
implemented for resource control. The algorithm attempts through simple steps and minor
computations to mitigate congestion in wireless sensor networks by creating dynamic alternative
paths to the sink.
In [7] an algorithm which is called Rapid Congestion Control Algorithm (RCCA) for data
flow rate control and Cluster Head (CH) selection is proposed. Most of the wireless sensor
networks research topics consider how to save the energy of the sensor nodes. In some
applications of WSN, like the monitoring of an earthquake or forest wildfire, transmitting
emergency data packets to the sink node as soon as possible is much more important than saving
power. Liu et al., [8] focused on Priority-based Hybrid Protocol WSN model to provide a
feasible WSN architecture, which can save the energy of the sensor nodes in normal situation,
and transmits emergency data packets in an efficient manner to the sink node. Gajendra et
al., [9] has presented the multiple sink mechanism in which sensor nodes are able to deliver data
to multiple sink in the network. Congestion control mechanism used in this work improves the
packet delivery ratio, reliability, throughput of the network. It reduces the packet loss ratio,
which reduces the number of retransmission, saves the energy of sensor node. This improves the
network lifetime. It is able to handle the Black Hole Problem in the wireless sensor network.
Kiran et al., [10] focused on many problems starting with the basic problem of eliminating the
phenomenon of congestion collapse, and include the problems of effectively using the available
network resources in different types of environments. Many other techniques have the ability to
measure the loss rate, delay and bottleneck buffer size, and level of congestion in wireless sensor
networks.
5. NETWORK MODEL
In this section Network Model used and the Assumptions made are discussed along with
preliminaries required for the design of our proposed TTACCA Algorithm.
5.1 Network Model and Assumptions Made
The network is modelled as bowl structure as illustrated in Figure 1. The sink resides at the
bottom, and all data packets flow down along the surface just like water. When the traffic load
in the network is light, the surface of the bowl is smoother and hence our algorithm acts just
like the shortest path routing. In heavily loaded cases (e.g., burst of data packets caused by
detection of a monitoring event), the congestion will form bulges on the bowl surface which
blocks the packets to flow directly down to the bottom along the shortest path. The excessive
packets are driven by the potential field to the appropriate alternative path without obstacles, i.e.,
idle or less loaded nodes. When the congestion disappears, the bowl surface becomes smoother,
and the packets continue to move along the shortest path. Essentially, through spreading the
packet transmissions spatially and temporarily, our TTACCA scheme alleviates congestion,
while improving the throughput at the same time [2].
Table 1: Symbols used in the Algorithm
Symbols Meaning
N_ID Neighbour node ID
U_msg Updated Message
local depth Depth value of the parent node
Local queue length Queue length value of parent node
Q(N_ID) Normalized queue length of the neighbour node
C Cost of radio link between parent node and
neighbour node
D Depth of neighbour node

Q Queue length of node
Fd (N_ID) Depth force between parent node and neighbour
node
Fq (N_ID) Queue length force between parent node and
neighbour node
Fm(N_ID) Combined force between parent node and neighbour
node
Α Combined Co-efficient
P Data packet
5.2. Preliminaries
This section describes the construction of routing potential fields required for our proposed
TTACCA algorithm namely the depth field and the queue length field.
(i) Depth Potential Field: Provides the basic routing function (which the smooth bowl does),
namely, to make each packet flow towards the sink. TTACCA defines the depth potential field
Vd as Vd = Depth(v) where Depth(v) is the depth of node v. The depth field from node v
to its neighbour w Є nbr(v) is given by
Fd(v,w) = (Vd(v)-Vd(w)) / c v,w (1)
Fd(v,w) denotes the force between the parent node v and the neighbour node w. This force is
calculated by taking difference of depth field from parent node v and its neighbour w divided by
cost of radio link between the node v and neighbour w.
(ii) Queue Length Field: The priority routing function which determines the number of packets at
each and every node in the network. In the bowl structure network model, packets move from a
node to a neighbour with lower potential. To avoid a hotspot which is identified by a large queue,
the potential at this node should be raised. Now, we define the queue length potential field.
Vq(v) = Q(v) (2)
Q(v) denotes the normalized queue at node v and it is defined as Q(v) = Number of packets in the
queue/Buffer size at node v.
6. PROBLEM DEFINITION
The objective of our TTACCA algorithm is to alleviate congestion and improve throughput by
distributing packets in both time and space. The main focus of this work is on detection and
reduction of congestion in a particular node in WSN. The algorithm works based on Two-hop
routing technique. Two-hop based Traffic-Aware Congestion Control Algorithm forwards data
packets around the congestion areas by spreading the excessive along multiple paths. The
idle or under loaded nodes are efficiently utilized in response to congestion.

Figure 1: Bowl structure of the network
7. ALGORITHM
This section explains the TTACCA algorithm given in Table 2. TTACCA needs the status
information from neighbour nodes, such as queue length and depth, to construct the potential
fields.
The WSN is modelled as a bowl structure. In the bowl model each node will send data packets
to the neighbours before, it reaches sink node. The data packets generated from source sensor
nodes acts as input to the TTACCA algorithm. The neighbour nodes receiving the data packets,
finds the shortest paths to the sink by choosing the depth field and congestion free path using
queue length potential field. The neighbours receiving the N_ID, U_msg from the
neighbours, updates the parent node information into the routing table. The routing table contains
the information like SINK_ID, N_ID, C, d, q, Q(N_ID), Fd(N_ID). Routing table contains
information of all one hop neighbours and two hop neighbours routing information. Which
includes N_ID, C, d, q, Q(N_ID), Fd(N_ID), Fq(N_ID), Fm(N_ID) (Combined force field
between parent and its neighbour).
Table 2: Two-Hop based Traffic Aware Congestion Control Algorithm (TTACCA)
Routing Table at node ’v’
Input : A WSN modelled as a bowl structure
Output : Queue length field and depth field
1. InsertToRouting Table( N_ID, U_msg )
2:local depth = depth( v );
3:local queue length = queue length( v )
4:Q( v ) = ( local queue length ) / buffer size;
5:for each entry in routing table
6:if (local depth – d ≤ 2)
{
C = cost of radio link to N_ID
d = depth of N_ ID
q = queue length of N_ ID
Q(N_ID) = ( q ) / buffer size
Fd (N_ID) = ( local depth – d ) / C
Fq(N_ ID) = (local queue length - q) / C
n = number of neighbour ID
Fm (N_ID) = ( 1 - α) Fd(N_ ID) + α Fq(N_ ID)
}
end for

8. PERFORMANCE EVALUATION
This section details the simulation parameters used for the simulation of the TTACCA algorithm
and Performance analysis of the algorithm through the graphs.
8.1 Simulation Setup
Table 3: Simulation Parameters
Parameters Value
Area Size 500 m * 500m
Number of nodes 18-99
Deployment Type Random
Transmission Range 212 mtrs
Sink Coordination 250 m * 250 m
Initial Energy 1J
Link layer
transmission
8kbps
Interface Queue
Type
Queue/DropTail/PriQueue
Antenna Antenna/OmniAnteena
0.1 seconds Least Utilization Time
10 seconds Maximum Utilization
Time
Application Type Event Driven
The simulation parameters used in TTACCA algorithm is shown in Table 3. The sensor nodes
are first deployed randomly in square area with dimensions 500m * 500m. The sink node is
placed in the centre of the area. The WSN is modelled as bowl structure. The transmission range
for all nodes is fixed for 212m. The propagation model used is TwoRayGround. The TTACCA
algorithm is simulated under two scenarios: with high load in the network and with low load in
the network
8.2 Performance Analysis
In this section, we evaluate the performance of TTACCA algorithm using simulation experiments
conducted on the NS2 [11] platform. NS2 uses OTcl and C++ codes to implement the given
scenario. For a comprehensive performance evaluation, several QoS quantitative metrics
considered are defined below
(i) Energy Consumption: The average consumed energy per packet received by the sink reflects
the energy efficiency of the protocols. It is ratio of the total energy consumption to the
number of packets received by the sink successfully. The lower the energy consumed per
packet, the higher the energy efficiency.

Figure 2: Time versus Throughput
Figure 2 depicts the energy consumption of the TTACCA algorithm. The energy consumed per
packet is effectively reduced by 30 % compared to the TADR algorithm. TTACCA
algorithm selects the forwarding node by considering distance to sink and forwarder node
set information in the one hop neighbourhood or two hop neighbours. Considering distance
to sink and forwarder node set information in the one hop neighbourhood or two hop
neighbours. The queue length field in the one hop or two hop neighbour set solves the traffic
aware problem. The depth filed gives the shortest path from parent node to the destination node.
The number of hops travelled by the packet or message to reach the destination is
comparatively less. Hence the energy consumed for each packet to reach the destination or
sink node is less.
(ii) Throughput: It is the ratio of number of packets received by the sink to the number of
packets sent by the source node.
Figure 3 shows the comparison of time versus throughput. TADR routes the packets around the
under loaded or idle nodes around the hotspot. Whenever a hotspot occurs in the network this
results in packet dropping at the hotspot or near the sink node. Due to this in TADR the
overall throughput is comparatively low. TTACCA scatters the packets to under loaded or
idle nodes around the hotspot through two hop routing technique or one hop routing
technique. Excessive packets in and around the hotspots when congestion occurs in the
network are spread evenly through alternate paths with less load. Hence throughput of
TTACCA algorithm is improved by 20% compared with the TADR algorithm. Hence the
overall throughput is high compared to TADR

Figure 3: Time versus Throughput
Figure 4 : Time versus Delay per Packet
(iii) Delay: The time taken between the source node sending the packet and the destination
node receiving the packet is End-to-End Delay.
Figure 4 shows the comparison of delay per packets versus time.Initially no packet transmission
takes place due to this the delay is less. As simulation time increases from 0 to 50 seconds,
number of packet transmission and transmission overhead increases due to this there is a
gradual increase in delay and finally reaches to saturation. In TADR packet transmission is
hop by hop. At each hop packet selects its next hop from the one hop neighbour set.
Hence dropping of packets is more. Whereas in TTACCA algorithm follows multihop
transmission hence packet dropping is low, implies that in TTACCA delay is comparatively
low due to the depth potential field, which selects the routing path based on shortest
distance from source to the sink node.

9. CONCLUSIONS
The congestion control in WSN is different from that in tradition networks, such as
Wireless LAN and adhoc networks. The pure traffic control is able to alleviate congestion, but
hard to satisfy the fidelity required by applications. In this paper, TTACCA algorithms
follows the philosophy of dynamic capacity planning to deal with the congestion problem in
WSN. Through TTACCA algorithm QoS performance metrics delay is reduced by 10%,
improves energy efficiency by 30% and throughput of TTACCA is high compared with
TADR. The TACCA algorithm thus mitigates congestion in the network efficiently compared to
TADR congestion control algorithm.
REFERENCES
[1] Mansoor-uz-Zafar Dawood, Biztek, Pakistan,Noor Zaman, Abdul Raouf Khan, Mohammad
Salih,”Designing of Energy Aware Quality of Service (QoS) Based Routing Protocol for Efficiency
Improvement in Wireless Sensor Network”, Journal of Information and Communication Technology,
Vol. 4, No. 1, 2010.
[2] Fengyuan Ren and Tao He, ”Traffic-Aware Dynamic Routing to Alleviate Congestion in Wireless
Sensor Networks”, IEEE Transactions On Parallel and Distributed Systems, Vol. 22, No. 9,
September 2011.
[3] Muhammad Monowar, Obaidur Rahman, Al-Sakib Khan Pathan, and Choong Seon Hong,
”Prioritized Heterogeneous Traffic-Oriented Congestion Control Protocol for WSNs” , The
International Arab Journal of Information Technology, Vol. 9, No. 1, January 2012.
[4] Muhammad Omer Farooq, Thomas Kunz, and Marc St-Hilaire, ”Differentiated Services based
Congestion Control Algorithm for Wireless Multimedia Sensor Networks”, IEEE, 2011.
[5] Sohail Jabbar, Awais Ahmad, Ataul Aziz Ikram, Murad Khan, ”TSEEC - TS/TDMA based Energy
Efficient Congestion Control in Mobile Wireless Sensor Network”, Proceedings of the World
Congress on Engineering and Computer Science, October 19-21, 2011, San Francisco, USA 2011.
[6] Charalambos Sergiou, Vasos Vassiliou and Aristodemos Paphitis, ”Hierarchical Tree Alternative
Path (HTAP) Algorithm for Congestion Control in Wireless Sensor Networks”, University of
Cyprus, February 3, 2012.
[7] G Srinivasan and S Murugappan, ”Rapid Congestion Control Technique for Wireless Sensor
Network for Energy Efficiency and Reliability”, International Conference on Computing and
Control Engineering, 12 and 13 April, 2012.
[8] Hsu-Jung Liu, Mei-Wen Huang, Wen-Shyong Hsieh, Chenhuan Jack Jan,”Priority-based Hybrid
Protocol in Wireless Sensor Networks”, 11th IEEE International Conference on High
performance Computing and Communications, 2009.
[9] Gajendra Sanjay Vyas, Vivek S Deshpande, ”Effect of Multiple Sinks on the Performance of
Wireless Sensor Networks”, International Journal of Emerging Science and Engineering, Vol. 1,
No. 5, March 2013.
[10] Kiran Babu T S, Manoj Challa, Sundeep Kumar K, M Jitendranath, ” Congestion Control using
Adaptive Buffer Flow Managements in WSN”, International Journal of Scientific
Engineering Research, Vol. 3, No.8, August 2012.
[11] http://www.isi.edu/nsmam/ns

AUTHORS
Prabha R is currently working as an Associate Professor in the Department of
Information Science and Engineering, Dr. Ambedkar Institute of Technology, Bangalore,
India. She obtained her Bachelor of Engineering degree in Computer Science and
Engineering branch. M.E in Computer Science and Engineering from Computer Science
Department, UVCE, Bangalore University in the year 2003. She has 22 years of teaching
experience. Currently she is pursuing Ph. D in the Department of Computer Science and
Engineering, University Visvesvaraya College of Engineering, Bangalore University,
Bangalore. Her research interest is in the area of Wireless Sensor Networks.
Prashanth Kumar Gouda received his B.E in Electronics and Communication
Engineering from Dr. Ambedkar Institute of Technology Bangalore from Visvesvaraya
Technological University in the year of 2010. M.E in Computer Networks from Computer
Science Department, UVCE, Bangalore University in the year2013. His research focus
includes QoS and Routing in WSN and Cloud Networking and Communication. He
worked as Business Intelligence Developer at GrayMatter Software Service Private
limited Bangalore.
Dr. S H Manjula is currently working as an Associate Professor in the Department of
Computer Science and Engineering, University Visvesvaraya College of Engineering
Bangalore University, Bangalore, India. She obtained her Bachelor of Engineering
degree in Computer Science and Engineering branch, Masters of Engineering and Ph
D. in Computer Science and Engineering. She has published a book on Wireless Sensor
Networks. She has published more than 30 papers in refereed international journals and
conferences. Her research interests are in the field of Wireless Sensor Networks, Semantic
web and Data Mining.
Dr. Venugopal K R is currently Special Officer, DVG Bangalore University and
Principal, University Visveswaraya College of Engineering, Bangalore University
Bangalore. He obtained his Bachelor of Engineering from University Visvesvaraya College
of Engineering. He received his Master’s degree in Computer Science and Automation
from Indian Institute of Science Bangalore. He was awarded Ph. D in Economics from
Bangalore University and Ph.D in Computer Science from Indian Institute of Technology,
Madras. He has a distinguished academic career and has degrees in Electronics,
Economics, Law, Business Finance, Public Relations, Communications, Industrial
Relations, Computer Science and Journalism. He has authored and edited 39 books on Computer Science
and Economics, which include Petrodollar and the World Economy, C Aptitude, Mastering C,
Microprocessor Programming, Mastering C++ and Digital Circuits and Systems. During his three decades
of service at UVCE he has over 400 research papers to his credit. He was a Post-Doctoral Research
Scholar at University of Southern California, USA. His research interests include Computer Networks,
Wireless Sensor Networks, Parallel and Distributed Systems, Digital Signal Processing and Data Mining.
Dr L M Patnaik is honorary professor in Department of Computer Science and
Auto- mation, Indian institute of Science, Bangalore. During the past 35 years of his
service at the Institute he has over 700 research publications in refereed International
Conference Proceedings. He is a Fellow of all the four leading Science and Engineering
Academies in India. Fellow of the IEEE and the Academy of Science for the developing
world. He has received twenty national and international awards. Notable among them
is the IEEE Technical Achievement Award for his significant contributions to High
performance Computing and Soft Computing. He is an Ex-Vice Chancellor Defence institute of Advanced
Technology, Pune India. His area of research interest has been Parallel and Distributed Computing, Mobile
Computing, CAD for VLSI circuits, Soft computing and Computational Neuroscience.

TTACCA: TWO-HOP BASED TRAFFIC AWARE CONGESTION CONTROL ALGORITHM FOR WIRELESS SENSOR NETWORKS

More Related Content

What's hot (14)

Similar to TTACCA: TWO-HOP BASED TRAFFIC AWARE CONGESTION CONTROL ALGORITHM FOR WIRELESS SENSOR NETWORKS (20)

More from cscpconf (20)

Recently uploaded (20)

TTACCA: TWO-HOP BASED TRAFFIC AWARE CONGESTION CONTROL ALGORITHM FOR WIRELESS SENSOR NETWORKS