14_lecture.pptx

Chemical
Kinetics
© 2015 Pearson Education
Chapter 14
Chemical Kinetics
James F. Kirby
Quinnipiac University
Hamden, CT
Lecture Presentation

Chemical
Kinetics
Chemical Kinetics
• In chemical kinetics we study the rate (or
speed) at which a chemical process occurs.
• Besides information about the speed at
which reactions occur, kinetics also sheds
light on the reaction mechanism, a
molecular-level view of the path from
reactants to products.

Chemical
Kinetics
Factors that Affect
Reaction Rates
1) Physical state of the reactants
2) Reactant concentrations
3) Reaction temperature
4) Presence of a catalyst

Chemical
Kinetics
Physical State of the Reactants
• The more readily the reactants collide,
the more rapidly they react.
• Homogeneous reactions are often
faster.
• Heterogeneous reactions that involve
solids are faster if the surface area is
increased; i.e., a fine powder reacts
faster than a pellet or tablet.

Chemical
Kinetics
Reactant Concentrations
• Increasing reactant
concentration generally
increases reaction rate.
• Since there are more
molecules, more
collisions occur.

Chemical
Kinetics
Temperature
• Reaction rate generally increases with
increased temperature.
• Kinetic energy of molecules is related to
temperature.
• At higher temperatures, molecules
move more quickly, increasing numbers
of collisions and the energy the
molecules possess during the collisions.

Chemical
Kinetics
Presence of a Catalyst
• Catalysts affect rate without being in the
overall balanced equation.
• Catalysts affect the kinds of collisions,
changing the mechanism (individual
reactions that are part of the pathway
from reactants to products).
• Catalysts are critical in many biological
reactions.

Chemical
Kinetics
Reaction Rate
• Rate is a change in concentration over
a time period: Δ[ ]/Δt.
• Δ means “change in.”
• [ ] means molar concentration.
• t represents time.
• Types of rate measured:
average rate
instantaneous rate
initial rate

Chemical
Kinetics
Following Reaction Rates
 Rate of a reaction
is measured using
the concentration
of a reactant or a
product over time.
 In this example,
[C4H9Cl] is
followed.

Chemical
Kinetics
Following Reaction Rates
 The average rate
is calculated by the
–(change in
[C4H9Cl]) ÷
(change in time).
 The table shows
the average rate
for a variety of time
intervals.

Chemical
Kinetics
Plotting Rate Data
• A plot of the data gives more
information about rate.
• The slope of the curve at one
point in time gives the
instantaneous rate.
• The instantaneous rate at
time zero is called the initial
rate; this is often the rate of
interest to chemists.
• This figure shows
instantaneous and initial rate
of the earlier example.
Note: Reactions
typically slow down
over time!

Chemical
Kinetics
Relative Rates
• As was said, rates are followed using a reactant or
a product. Does this give the same rate for each
reactant and product?
• Rate is dependent on stoichiometry.
• If we followed use of C4H9Cl and compared it to
production of C4H9OH, the values would be the
same. Note that the change would have opposite
signs—one goes down in value, the other goes up.

Chemical
Kinetics
Relative Rates and Stoichiometry
• What if the equation is not 1:1?
• What will the relative rates be for:
2 O3 (g) → 3 O2 (g)

Chemical
Kinetics
Determining Concentration
Effect on Rate
• How do we determine what effect the
concentration of each reactant has on
the rate of the reaction?
• We keep every concentration constant
except for one reactant and see what
happens to the rate. Then, we change a
different reactant. We do this until we
have seen how each reactant has
affected the rate.

Chemical
Kinetics
An Example of How
Concentration Affects Rate
• Experiments 1–3 show how [NH4
+] affects rate.
• Experiments 4–6 show how [NO2
−] affects rate.
• Result: The rate law, which shows the
relationship between rate and concentration for all
reactants:
Rate = k [NH4
+] [NO2
−]

Chemical
Kinetics
More about Rate Law
• The exponents tell the order of the reaction with
respect to each reactant.
• In our example from the last slide:
Rate = k [NH4
+] [NO2
−]
• The order with respect to each reactant is 1. (It is
first order in NH4
+ and NO2
−.)
• The reaction is second order (1 + 1 = 2; we just
add up all of the reactants’ orders to get the
reaction’s order).
• What is k? It is the rate constant. It is a
temperature-dependent quantity.

Chemical
Kinetics
First Order Reactions
• Some rates depend only on one
reactant to the first power.
• These are first order reactions.
• The rate law becomes:
Rate = k [A]

Chemical
Kinetics
Relating k to [A] in a
First Order Reaction
• rate = k [A]
• rate = −Δ [A] / Δt
• So: k [A] = −Δ [A] / Δt
• Rearrange to: Δ [A] / [A] = − k Δt
• Integrate: ln ([A] / [A]o) = − k t
• Rearrange: ln [A] = − k t + ln [A]o
• Note: this follows the equation of a line:
y = m x + b
• So, a plot of ln [A] vs. t is linear.

Chemical
Kinetics
An Example: Conversion of Methyl
Isonitrile to Acetonitrile
• The equation for the reaction:
CH3NC → CH3CN
• It is first order.
Rate = k [CH3NC]

Chemical
Kinetics
Finding the Rate Constant, k
• Besides using the rate law, we can find
the rate constant from the plot of ln [A]
vs. t.
• Remember the integrated rate law:
ln [A] = − k t + ln [A]o
• The plot will give a line. Its slope will
equal −k.

Chemical
Kinetics
Half-life
• Definition: The amount of time
it takes for one-half of a
reactant to be used up in a
chemical reaction.
• First Order Reaction:
 ln [A] = − k t + ln [A]o
 ln ([A]o/2) = − k t½ + ln [A]o
 − ln ([A]o/2) + ln [A]o = k t½
 ln ([A]o / [A]o/2) = k t½
 ln 2 = k t½ or t½ = 0.693/k

Chemical
Kinetics
Second Order Reactions
• Some rates depend only on a reactant
to the second power.
• These are second order reactions.
• The rate law becomes:
Rate = k [A]2

Chemical
Kinetics
Solving the Second Order
Reaction for A → Products
• rate = k [A]2
• rate = − Δ [A] / Δ t
• So, k [A]2 = − Δ [A] / Δ t
• Rearranging: Δ [A] / [A]2 = − k Δ t
• Using calculus: 1/[A] = 1/[A]o + k t
• Notice: The linear relationships for first
order and second order reactions differ!

Chemical
Kinetics
An Example of a Second
Order Reaction:
Decomposition of NO2
A plot following NO2
decomposition shows
that it must be second
order because it is
linear for 1/[NO2], not
linear for ln [NO2].
Equation:
NO2 → NO + ½ O2

Chemical
Kinetics
Half-Life and Second Order
Reactions
• Using the integrated rate law, we can
see how half-life is derived:
1/[A] = 1/[A]o + k t
1/([A]o/2) = 1/[A]o + k t½
2/[A]o −1/[A]o = k t½
t½ = 1 / (k [A]o)
• So, half-life is a concentration
dependent quantity for second order
reactions!

Chemical
Kinetics
Zero Order Reactions
• Occasionally, rate is
independent of the
concentration of the
reactant:
• Rate = k
• These are zero order
reactions.
• These reactions are
linear in
concentration.

Chemical
Kinetics
Factors That Affect Reaction
Rate
1. Temperature
2. Frequency of collisions
3. Orientation of molecules
4. Energy needed for the reaction to take
place (activation energy)

Chemical
Kinetics
Temperature and Rate
• Generally, as
temperature increases,
rate increases.
• The rate constant is
temperature dependent:
it increases as
temperature increases.
• Rate constant doubles
(approximately) with
every 10 ºC rise.

Chemical
Kinetics
Frequency of Collisions
• The collision model is based on the kinetic
molecular theory.
• Molecules must collide to react.
• If there are more collisions, more reactions
can occur.
• So, if there are more molecules, the
reaction rate is faster.
• Also, if the temperature is higher, molecules
move faster, causing more collisions and a
higher rate of reaction.

Chemical
Kinetics
The Collision Model
• In a chemical reaction, bonds are
broken and new bonds are formed.
• Molecules can only react if they collide
with each other.

Chemical
Kinetics
Orientation of Molecules
• Molecules can often collide without
forming products.
• Aligning molecules properly can lead to
chemical reactions.
• Bonds must be broken and made and
atoms need to be in proper positions.

Chemical
Kinetics
Energy Needed for a Reaction to
Take Place (Activation Energy)
• The minimum energy needed for a reaction to take
place is called activation energy.
• An energy barrier must be overcome for a reaction
to take place, much like the ball must be hit to
overcome the barrier in the figure below.

Chemical
Kinetics
Transition State
(Activated Complex)
• Reactants gain energy as the reaction
proceeds until the particles reach the
maximum energy state.
• The organization of the atoms at this
highest energy state is called the
transition state (or activated complex).
• The energy needed to form this state is
called the activation energy.

Chemical
Kinetics
Reaction Progress
• Plots are made to show
the energy possessed
by the particles as the
reaction proceeds.
• At the highest energy
state, the transition state
is formed.
• Reactions can be
endothermic or
exothermic after this.

Chemical
Kinetics
Distribution of the Energy
of Molecules
• Gases have an average temperature, but
each individual molecule has its own energy.
• At higher energies, more molecules possess
the energy needed for the reaction to occur.

Chemical
Kinetics
The Relationship Between
Activation Energy & Temperature
• Arrhenius noted relationship between activation
energy and temperature: k = Ae−Ea/RT
• Activation energy can be determined graphically
by reorganizing the equation: ln k = −Ea/RT + ln A

Chemical
Kinetics
Law vs. Theory
• Kinetics gives what happens. We call
the description the rate law.
• Why do we observe that rate law? We
explain with a theory called a
mechanism.
• A mechanism is a series of stepwise
reactions that show how reactants
become products.

Chemical
Kinetics
Reaction Mechanisms
• Reactions may occur all at once or
through several discrete steps.
• Each of these processes is known as an
elementary reaction or elementary
process.

Chemical
Kinetics
Molecularity
The molecularity of an elementary reaction
tells how many molecules are involved in that
step of the mechanism.

Chemical
Kinetics
Termolecular?
• Termolecular steps require three
molecules to simultaneously collide with
the proper orientation and the proper
energy.
• These are rare, if they indeed do occur.
• These must be slower than
unimolecular or bimolecular steps.
• Nearly all mechanisms use only
unimolecular or bimolecular reactions.

Chemical
Kinetics
What Limits the Rate?
• The overall reaction cannot occur faster than
the slowest reaction in the mechanism.
• We call that the rate-determining step.

Chemical
Kinetics
What is Required of a
Plausible Mechanism?
• The rate law must be able to be devised
from the rate-determining step.
• The stoichiometry must be obtained when
all steps are added up.
• Each step must balance, like any equation.
• All intermediates are made and used up.
• Any catalyst is used and regenerated.

Chemical
Kinetics
A Mechanism With a Slow
Initial Step
• Overall equation: NO2 + CO → NO + CO2
• Rate law: Rate = k [NO2]2
• If the first step is the rate-determining step,
the coefficients on the reactants side are the
same as the order in the rate law!
• So, the first step of the mechanism begins:
NO2 + NO2 →

Chemical
Kinetics
Initial Step (continued)
• The easiest way to complete the first
step is to make a product:
NO2 + NO2 → NO + NO3
• We do not see NO3 in the stoichiometry,
so it is an intermediate, which needs to
be used in a faster next step.
NO3 + CO → NO2 + CO2

Chemical
Kinetics
Initial Step (completed)
• Since the first step is the slowest step, it
gives the rate law.
• If you add up all of the individual steps
(2 of them), you get the stoichiometry.
• Each step balances.
• This is a plausible mechanism.

Chemical
Kinetics
A Mechanism With a
Fast Initial Step
• Equation for the reaction:
2 NO + Br2 ⇌ 2 NOBr
• The rate law for this reaction is found to be
Rate = k [NO]2 [Br2]
• Because termolecular processes are rare,
this rate law suggests a multistep
mechanism.

Chemical
Kinetics
A Mechanism With a Fast
Initial Step (continued)
• The rate law indicates that a quickly
established equilibrium is followed by a
slow step.
• Step 1: NO + Br2 ⇌ NOBr2
• Step 2: NOBr2 + NO → 2 NOBr

Chemical
Kinetics
What is the Rate Law?
• The rate of the overall reaction depends
upon the rate of the slow step.
• The rate law for that step would be
Rate = k2[NOBr2] [NO]
• But how can we find [NOBr2]?

Chemical
Kinetics
[NOBr2] (An Intermediate)?
• NOBr2 can react two ways:
– With NO to form NOBr.
– By decomposition to reform NO and Br2.
• The reactants and products of the first
step are in equilibrium with each other.
• For an equilibrium (as we will see in the
next chapter):
Ratef = Rater

Chemical
Kinetics
The Rate Law (Finally!)
• Substituting for the forward and reverse rates:
k1 [NO] [Br2] = k−1 [NOBr2]
• Solve for [NOBr2], then substitute into the rate
law:
Rate = k2 (k1/k−1) [NO] [Br2] [NO]
• This gives the observed rate law!
Rate = k [NO]2 [Br2]

Chemical
Kinetics
Catalysts
• Catalysts increase the rate of a reaction by
decreasing the activation energy of the
reaction.
• Catalysts change the mechanism by which
the process occurs.

Chemical
Kinetics
Types of Catalysts
1) Homogeneous catalysts
2) Heterogeneous catalysts
3) Enzymes

Chemical
Kinetics
Homogeneous Catalysts
• The reactants and catalyst are in the
same phase.
• Many times, reactants and catalyst are
dissolved in the same solvent, as seen
below.

Chemical
Kinetics
Heterogeneous Catalysts
• The catalyst is in a
different phase than
the reactants.
• Often, gases are
passed over a solid
catalyst.
• The adsorption of
the reactants is
often the rate-
determining step.

Chemical
Kinetics
Enzymes
• Enzymes are
biological catalysts.
• They have a region
where the reactants
attach. That region
is called the active
site. The reactants
are referred to as
substrates.

Chemical
Kinetics
Lock-and-Key Model
• In the enzyme–substrate model, the
substrate fits into the active site of an
enzyme, much like a key fits into a lock.
• They are specific.

14_lecture.pptx

More Related Content

Similar to 14_lecture.pptx (20)

Recently uploaded (20)

14_lecture.pptx