White Paper: EMC Isilon OneFS — A Technical Overview

White Paper

EMC ISILON ONEFS: A TECHNICAL OVERVIEW

Abstract

This white paper provides an in-depth look at the major
components of the EMC Isilon OneFS operating and file system.
It details the software, hardware, distributed architecture and
various data protection mechanisms that make OneFS a very
flexible, easy to manage and a highly scalable enterprise storage
solution both in terms of capacity as well as performance.

September 2012

Copyright © 2012 EMC Corporation. All Rights Reserved.

EMC believes the information in this publication is accurate as
of its publication date. The information is subject to change
without notice.

The information in this publication is provided “as is.” EMC
Corporation makes no representations or warranties of any kind
with respect to the information in this publication, and
specifically disclaims implied warranties of merchantability or
fitness for a particular purpose.

Use, copying, and distribution of any EMC software described in
this publication requires an applicable software license.

For the most up-to-date listing of EMC product names, see EMC
Corporation Trademarks on EMC.com.

All other trademarks used herein are the property of their
respective owners.

Part Number H10719.1

EMC Isilon OneFS: A Technical Overview 2

Table of Contents
Introduction ................................................................................................... 5
EMC Isilon OneFS overview ............................................................................ 6
Isilon nodes ................................................................................................... 6
Network ......................................................................................................... 7
Back-end network .......................................................................................... 7
Front-end network ......................................................................................... 7
Complete cluster view .................................................................................... 7
OneFS software overview ............................................................................... 8
Operating system .......................................................................................... 8
Client services ............................................................................................... 8
Cluster operations .......................................................................................... 8
File system structure.................................................................................... 10
Data layout................................................................................................... 11
File writes .................................................................................................... 12
Write caching ............................................................................................... 16
File reads ..................................................................................................... 16
Locks and concurrency ................................................................................. 18
Multi-threaded IO......................................................................................... 19
Data protection ............................................................................................ 20
Power loss .................................................................................................. 20
Hardware failures and quorum....................................................................... 20
Hardware failures—add/remove nodes............................................................ 21
Scalable rebuild ........................................................................................... 21
Virtual hot spare .......................................................................................... 22
N + M data protection .................................................................................. 22
Automatic partitioning .................................................................................. 24
Supported protocols ..................................................................................... 25
Dynamic scale / scale on demand ................................................................ 26
Performance & capacity ................................................................................ 26
Interfaces .................................................................................................... 27
Authentication & access control ................................................................... 27
Active Directory ........................................................................................... 28
LDAP .......................................................................................................... 28
NIS ............................................................................................................ 28
Local users.................................................................................................. 28
Access zones ............................................................................................... 28
Roles Based Administration ........................................................................... 29


Software upgrade......................................................................................... 29
Simultaneous upgrade .................................................................................. 29
Rolling upgrade ........................................................................................... 29
Performing the upgrade ................................................................................ 29
EMC Isilon data protection and management software ................................ 30
Conclusion .................................................................................................... 31
About EMC Isilon .......................................................................................... 32


Introduction
In 2000, seeing the challenges with traditional storage architectures, and the pace at
which file-based data was increasing, the founders of Isilon® began work on a
revolutionary new storage architecture—the OneFS® Operating System. The
fundamental difference of EMC® Isilon storage is that it uses intelligent software to
scale data across vast quantities of commodity hardware, enabling explosive growth
in performance and capacity. The three layers of the traditional storage model—file
system, volume manager, and data protection—have evolved over time to suit the
needs of small-scale storage architectures, but introduce significant complexity and
are not well adapted to petabyte-scale systems. OneFS replaces all of these,
providing a unifying clustered file system with built-in scalable data protection, and
obviating the need for volume management. OneFS is a fundamental building block
for scale-out infrastructures, allowing for massive scale and tremendous efficiency.
Crucially, OneFS is designed to scale not just in terms of machines, but also in human
terms—allowing large-scale systems to be managed with a fraction of the personnel
required for traditional storage systems. OneFS eliminates complexity and
incorporates self-healing and self-managing functionality that dramatically reduces
the burden of storage management. OneFS also incorporates parallelism at a very
deep-level of the OS, such that virtually every key system service is distributed
across multiple units of hardware. This allows OneFS to scale in virtually every
dimension as the infrastructure is expanded, ensuring that what works today, will
continue to work as the dataset grows.
OneFS is a fully symmetric file system with no single point of failure — taking
advantage of clustering not just to scale performance and capacity, but also to allow
for any-to-any failover and multiple levels of redundancy that go far beyond the
capabilities of RAID. The trend for disk subsystems has been slowly-increasing
performance while rapidly-increasing storage densities. OneFS responds to this reality
by scaling the amount of redundancy as well as the speed of failure repair. This allows
OneFS to grow to multi-petabyte scale while providing greater reliability than small,
traditional storage systems.
Isilon scale-out NAS hardware provides the appliance on which OneFS executes.
Hardware components are best-of-breed, but commodity-based — ensuring that
Isilon hardware benefits from commodity hardware’s ever-improving cost and
efficiency curves. OneFS allows hardware to be incorporated or removed from the
cluster at will and at any time, abstracting the data and applications away from the
hardware. Data is given infinite longevity, protected from the vicissitudes of evolving
hardware generations. The cost and pain of data migrations and hardware refreshes
are eliminated.
OneFS is ideally suited for file-based and unstructured “Big Data” applications in
enterprise environments including large-scale home directories, file shares, archives,
virtualization and business analytics. As such, OneFS is widely used in many data-
intensive industries today, including energy, financial services, Internet and hosting
services, business intelligence, engineering, manufacturing, media & entertainment,
bioinformatics, scientific research and other high performance computing
environments.


EMC Isilon OneFS overview
OneFS combines the three layers of traditional storage architectures—file system,
volume manager, and data protection—into one unified software layer, creating a
single intelligent distributed file system that runs on an Isilon storage cluster.

Figure 1: OneFS Combines File System, Volume Manager and Data Protection
into One Single Intelligent, Distributed System.

This is the core innovation that directly enables enterprises to successfully utilize the
scale-out NAS in their environments today. It adheres to the key principles of scale-
out; intelligent software, commodity hardware and distributed architecture. OneFS is
not only the operating system but also the underlying file system that drives and
stores data in the Isilon scale-out NAS cluster.

Isilon nodes
OneFS works exclusively with the Isilon scale-out NAS nodes, referred to as a
“cluster”. A single Isilon cluster consists of multiple “nodes”, which are constructed as
rack-mountable enterprise appliances containing: memory, CPU, networking, Non-
Volatile Random Access Memory (NVRAM), low-latency InfiniBand interconnects, disk
controllers and storage media. Each node in the distributed cluster thus has compute
or processing capabilities as well as storage or capacity capabilities.
An Isilon cluster starts with as few as three-nodes, and can scale to 144-nodes. There
are many different types of nodes, all of which can be incorporated into a single
cluster where different nodes provide different ratios of capacity to throughput or
Input/Output operations per second (IOPS).
OneFS has no built-in limitation in terms of the number of nodes that can be included
in a single system. Each node added to a cluster increases aggregate disk, cache,
CPU, and network capacity. OneFS leverages each of the hardware building blocks, so
that the whole becomes greater than the sum of the parts. The RAM is grouped
together into a single coherent cache, allowing I/O on any part of the cluster to
benefit from data cached anywhere. NVRAM is grouped together to allow for high-
throughput writes that are safe across power failures. Spindles and CPU are combined
to increase throughput, capacity and IOPS as the cluster grows, for access to one file
or for multiple files. A cluster’s storage capacity can range from a minimum of 18
terabytes (TB) to a maximum of 15.5 petabytes (PB). The maximum capacity will
continue to increase as disk drives continue to get denser.


The available Isilon nodes today are broken into several classes, according to their
functionality:
• S-Series: IOPS-intensive applications
• X-Series: High-concurrency and throughput-driven workflows
• NL-Series: Near-primary accessibility, with near-tape value
• Performance Accelerator: Independent scaling for ultimate performance
• Backup Accelerator: High-speed and scalable backup and restore solution

Network
There are two types of networks associated with a cluster: internal and external.

Back-end network
All intra-node communication in a cluster is performed using a proprietary, unicast
(node to node) protocol. Communication occurs using extremely fast low-latency,
InfiniBand (IB) network. This back-end network, which is configured with redundant
switches for high availability, acts as the backplane for the cluster, enabling each
node to act as a contributor in the cluster and isolating node-to-node communication
to a private, high-speed, low-latency network. This back-end network utilizes Internet
Protocol (IP) over IB for node-to-node communication

Front-end network
Clients connect to the cluster using Ethernet connections (1GbE or 10GbE) that are
available on all nodes. Because each node provides its own Ethernet ports, the
amount of network bandwidth available to the cluster scales linearly with performance
and capacity. The Isilon cluster supports standard network communication protocols
to a customer network, including NFS, CIFS, HTTP, iSCSI, FTP and HDFS.

Complete cluster view
The complete cluster is combined with hardware, software, networks in the following
view:


Figure 2: All Components of OneFS at Work

Figure 2 depicts the complete architecture; software, hardware and network all
working together in your environment with servers to provide a completely distributed
single file system that can scale dynamically as workloads and capacity needs or
throughput needs change in a scale-out environment.

OneFS software overview
Operating system
OneFS is built on a BSD-based Operating System (OS) foundation. It supports both
Linux/UNIX and Windows semantics natively, including hard links, delete-on-close,
atomic rename, ACLs, and extended attributes. It uses BSD as its base OS because it
is a mature and proven Operating System and the open source community can be
leveraged for innovation.

Client services
The front-end protocols that the clients can use to interact with OneFS are referred to
as client services. Please refer to the Supported Protocols section for a detailed list of
supported protocols. In order to understand, how OneFS communicates with clients,
we split the I/O subsystem into two halves: the top half or the Initiator and the
bottom half or the Participant. Every node in the cluster is a Participant for a
particular I/O operation. The node that the client connects to is the Initiator and that
node acts as the “captain” for the entire I/O operation. The read and write operation
are detailed in later sections

Cluster operations
In a clustered architecture, there are cluster jobs that are responsible for taking care
of the health and maintenance of the cluster itself—these jobs are all run through a
job engine. The job engine is in charge of distributing and performing critical jobs or
operations throughout the entire OneFS cluster. OneFS has a number of jobs that can


be managed in terms of priorities or initiating, but cannot be deleted from running on
the cluster. These jobs can be managed by setting or changing the priority-level of a
job in relation to other jobs, as well as manage the impact policy for a job. Below is a
list of jobs or operations that the job engine performs:
• AutoBalanceTM: Balances free space in the cluster.
• AutoBalanceLinTM: Balances free space in the cluster.
• AVScanTM: Virus scanning job that a particular ICAP server/s run.
• Collect: Reclaims disk space that could not be freed due to a node or drive being
unavailable while they suffer from various failure conditions.
• DomainMarkTM: Associate a path and its contents with a domain.
• FlexProtectTM: Rebuild and re-protect the file system to recover from a failure
scenario.
• FlexProtectLinTM: Reprotect the filesystem.
• FSAnalyzeTM: Gathers file system analytics data that is used in conjunction with
InsightIQ.
• IntegrityScanTM: Perform online verification and correction of any file system
inconsistencies.
• MediaScanTM: Scrubs disks for media-level errors.
• MultiScanTM: Runs Collect and AutoBalance jobs concurrently.
• PermissionRepairTM: Correct permissions of files and directories.
• QuotaScanTM: Updates quota accounting for domains created on an existing
directory path.
• SetProtectPlusTM: Applies the default file policy. This job is disabled if
SmartPools is activated on the cluster.
• ShadowStoreDeleteTM: Free space associated with a shadow store.
• SmartPoolsTM: Job that runs and moves data between the tiers of nodes within
the same cluster.
• SnapRevertTM: Revert an entire snapshot back to head.
• SnapshotDeleteTM: Frees disk space that is associated with deleted snapshots.
• TreeDeleteTM: Deletes a path in the file system directly from the cluster itself.
An impact policy can consist of one or many impact intervals, which are blocks of time
within a given week. Each impact interval can be configured to use a single pre-
defined impact-level which specifies the amount of cluster resources to use for a
particular cluster operation. Available impact-levels are described below:
• Paused: Do not use cluster resources.
• Low: Use 10% or less of cluster resources.
• Medium: Use 30% or less of cluster resources.
• High: Use unlimited cluster resources.
This level of granularity ensures that OneFS performs adequately and appropriately
for every impact interval in the customer’s environment. Hence, impact policy


management goes hand-in-hand with running the appropriate jobs to ensure smooth
cluster operations.

File system structure
The OneFS file system is based on the Unix file system (UFS) and, hence, is a very
fast distributed file system. Each cluster creates a single namespace and file system.
This means that the file system is distributed across all nodes in the cluster and is
accessible by clients connecting to any node in the cluster. There is no partitioning,
and no need for volume creation. Instead of limiting access to free space and to non-
authorized files at the physical volume-level, OneFS provides for the same
functionality in software via share and file permissions, and via the Isilon
SmartQuotasTM service, which provides directory-level quota management.
Because all information is shared among nodes across the internal network, data can
be written to or read from any node, thus optimizing performance when multiple
users are concurrently reading and writing to the same set of data.

Figure 3: Single File System Starting at the Root inode /ifs

Figure 3 illustrates that OneFS is truly a single file system with one namespace. Data
and metadata are striped across the nodes for redundancy and availability. The
storage has been completely virtualized for the users and administrator. The file tree
can grow organically without requiring planning or oversight about how the tree
grows or how users use it. No special thought has to be applied by the administrator
about tiering files to the appropriate disk, because Isilon SmartPools will handle that
automatically without disrupting the single tree. No special consideration needs to be
given to how one might replicate such a large tree, because the Isilon SyncIQTM


service automatically parallelizes the transfer of the file tree to one or more alternate
clusters, without regard to the shape or depth of the file tree.
This design should be compared with namespace aggregation, which is a commonly-
used technology to make traditional NAS “appear” to have a single namespace. With
namespace aggregation, files still have to be managed in separate volumes, but a
simple “veneer” layer allows for individual directories in volumes to be “glued” to a
“top-level” tree via symbolic links. In that model, LUNs and volumes, as well as
volume limits, are still present. Files have to be manually moved from volume-to-
volume in order to load-balance. The administrator has to be careful about how the
tree is laid out. Tiering is far from seamless and requires significant and continual
intervention. Failover requires mirroring files between volumes, driving down
efficiency and ramping up purchase cost, power and cooling. Overall the administrator
burden when using namespace aggregation is higher than it is for a simple traditional
NAS device. This prevents such infrastructures from growing very large.

Data layout
OneFS uses physical pointers and extents for metadata and stores file and directory
metadata in inodes. B-trees are used extensively in the file system, allowing
scalability to billions of objects and near-instant lookups of data or metadata. OneFS
is a completely symmetric, and highly distributed file system. Data and metadata are
always redundant across multiple hardware devices. Data is protected using erasure
coding across the nodes in the cluster, this creates a cluster that has high-efficiency,
allowing 80% or better raw-to-usable on clusters of five nodes or more. Metadata
(which makes up generally less than 1% of the system) is mirrored in the cluster for
performance and availability. As OneFS is not reliant on RAID, the amount of
redundancy is selectable by the administrator, at the file- or directory-level beyond
the defaults of the cluster. Metadata access and locking tasks are managed by all
nodes collectively and equally in a peer-to-peer architecture. This symmetry is key to
the simplicity and resiliency of the architecture. There is no single metadata server,
lock manager or gateway node.
Because OneFS must access blocks from several devices simultaneously, the
addressing scheme used for data and metadata is indexed at the physical-level by a
tuple of {node, drive, offset}. For example if 12345 was a block address for a block
that lived on disk 2 of node 3, then it would read, {3,2,12345}. All metadata within
the cluster is multiply mirrored for data protection, at least to the level of redundancy
of the associated file. For example, if a file were at an erasure-code protection of
“N+2”, implying the file could withstand two simultaneous failures, then all metadata
needed to access that file would be 3x mirrored, so it too could withstand two
failures. The file system inherently allows for any structure to use any and all blocks
on any nodes in the cluster.
Other storage systems send data through RAID and volume management layers,
introducing inefficiencies in data layout and providing non-optimized block access.
Isilon OneFS controls the placement of files directly, down to the sector-level on any
drive anywhere in the cluster. This allows for optimized data placement and I/O
patterns and avoids unnecessary read-modify-write operations. By laying data on
disks in a file-by-file manner, OneFS is able to flexibly control the type of striping as


well as the redundancy level of the storage system at the system, directory, and even
file-levels. Traditional storage systems would require that an entire RAID volume be
dedicated to a particular performance type and protection setting. For example, a set
of disks might be arranged in a RAID 1+0 protection for a database. This makes it
difficult to optimize spindle use over the entire storage estate (since idle spindles
cannot be borrowed) and also leads to inflexible designs that do not adapt with the
business requirement. OneFS allows for individual tuning and flexible changes at any
time, fully online.

File writes
The OneFS software runs on all nodes equally - creating a single file system that runs
across every node. No one node controls or “masters” the cluster; all nodes are true
peers.

Figure 4: Model of Node Components Involved in I/O

If we were to look at all the components within every node of a cluster that are
involved in I/O from a high-level, it would look like Figure 4 above. We have split the
stack into a “top” layer, called the Initiator, and a “bottom” layer, called the
Participant. This division is used as a “logical model” for the analysis of any one given
read or write. At a physical-level, CPUs and RAM cache in the nodes are
simultaneously handling Initiator and Participant tasks for I/O taking place throughout
the cluster. There are caches and a distributed lock manager that are excluded from
the diagram above to keep it simple. They will be covered in later sections of the
paper.
When a client connects to a node to write a file, it is connecting to the top half or
Initiator of that node. Files are broken into smaller logical chunks called stripes before
being written to the bottom half or Participant of a node (disk). Failure-safe buffering


using a write coalescer is used to ensure that writes are efficient and read-modify-
write operations are avoided. The size of each file chunk is referred to as the stripe
unit size.
OneFS stripes data across all nodes—and not simply across disks—and protects the
files, directories and associated metadata via software erasure-code or mirroring
technology. For data, OneFS can use (at the administrator’s discretion) either the
Reed-Solomon erasure coding system for data protection, or (less commonly)
mirroring. Mirroring, when applied to user data, tends to be used more for high-
transaction performance cases, such as iSCSI LUNs. The bulk of user data will
generally use erasure coding, as it provides extremely high performance without
sacrificing on-disk efficiency. Erasure coding can provide beyond 80% efficiency on
raw disk with five nodes or more, and on large clusters can even do so while
providing quadruple-level redundancy. The stripe width for any given file is the
number of nodes (not disks) that a file is written across. It is determined by the
number of nodes in the cluster, the size of the file, and the protection setting (for
example, N+2).
OneFS uses advanced algorithms to determine data layout for maximum efficiency
and performance. When a client connects to a node, that node’s initiator acts as the
“captain” for the write data layout of that file. In an Isilon cluster, data, parity,
metadata and inodes are all distributed on multiple nodes, and even across multiple
drives within nodes. Figure 5 below shows a file write happening across all nodes in a
3 node cluster.

Figure 5: A File Write in a 3-node Isilon Cluster


OneFS uses the InfiniBand back-end network to allocate and stripe data across all
nodes in the cluster automatically, so no additional processing is required. As data is
being written, it is being protected at the specified level.
When writes take place, OneFS divides data out into atomic units called protection
groups. Redundancy is built into protection groups, such that if every protection
group is safe, then the entire file is safe. For files protected by erasure codes, a
protection group consists of a series of data blocks as well as a set of erasure codes
for those data blocks; for mirrored files, a protection group consists of all of the
mirrors of a set of blocks. OneFS is capable of switching the type of protection group
used in a file dynamically, as it is writing. This can allow many additional
functionalities, including, for example, allowing the system to continue without
blocking in situations when temporary node failures in the cluster would prevent the
desired number of erasure codes from being used. Mirroring can be used temporarily
in these cases to allow writes to continue. When nodes are restored to the cluster,
these mirrored protection groups are converted back seamlessly and automatically to
erasure-code-protected, without administrator intervention.
The OneFS file system block size is 8KB. A file smaller than 8KB will use a full 8KB
block. Depending on the data protection level, this 8KB file could end up using more
than 8KB of data space. However, data protection settings are discussed in detail in a
later section of this paper. OneFS can support file systems with billions of small files
at very high performance, because all of the on-disk structures are designed to scale
to such sizes, and provide near-instantaneous access to any one object regardless of
the total number of objects. For larger files, OneFS can take advantage of using
multiple, contiguous 8KB blocks. In these cases, up to sixteen contiguous blocks can
be striped onto a single node’s disk. If a file is 32KB in size, then four contiguous 8KB
blocks will be used.
For even larger files, OneFS can maximize sequential performance by taking
advantage of a stripe unit consisting of 16 contiguous blocks, for a total of 128KB per
stripe unit. During a write, data is broken into stripe units and these are spread
across multiple nodes as a protection group. As data is being laid out across the
cluster, erasure codes or mirrors, as required, are distributed within each protection
group to ensure that files are protected at all times.
One of the key functions of the AutoBalance functionality of OneFS is to reallocate
and rebalance data and make storage space more usable and efficient, when possible.
In most cases, the stripe width of larger files can be increased to take advantage of
new free space (as nodes are added) and to make the on-disk striping more efficient.
AutoBalance maintains high on-disk efficiency and eliminates on-disk “hot spots”
automatically.
The initiator top half of the “captain” node uses a patented, modified two-phase
commit transaction to safely distribute writes to multiple NVRAMs across the cluster,
as shown in Figure 6 below.


Figure 6: Distributed Transactions and Two-Phase Commit

Every node that owns blocks in a particular write is involved in a two-phase commit.
The mechanism relies on NVRAM for journaling all the transactions that are occurring
across every node in the storage cluster. Using multiple NVRAMs in parallel allows for
high-throughput writes while maintaining data safety against all manner of failures,
including power failures. In the event that a node should fail mid-transaction, the
transaction is restarted instantly without that node involved. When the node returns,
the only required actions are for the node to replay its journal from NVRAM—which
takes seconds or minutes—and, occasionally, for AutoBalance to rebalance files that
were involved in the transaction. No expensive “fsck” or “disk-check” processes are
ever required. No drawn-out resynchronization ever needs to take place. Writes are
never blocked due to a failure. The patented transaction system is one of the ways
that OneFS eliminates single—and even multiple—points of failure.
In a write operation, the initiator “captains” or orchestrates the layout of data and
metadata; the creation of erasure codes; and the normal operations of lock
management and permissions control. An administrator from the web management or
CLI interface at any point can optimize layout decisions made by OneFS to better suit
the workflow. The administrator can choose from the access patterns below at a per-
file or directory-level:
• Concurrency: Optimizes for current load on the cluster, featuring many
simultaneous clients. This setting provides the best behavior for mixed workloads.
• Streaming: Optimizes for high-speed streaming of a single file, for example to
enable very fast reading with a single client.


• Random: Optimizes for unpredictable access to the file, by adjusting striping and
disabling the use of any prefetch cache. This is the default setting for iSCSI logical
units.

Write caching
Write caching accelerates the process of writing data to an Isilon cluster. This is
achieved by batching up smaller write requests and sending them to disk in bigger
chunks, removing a significant amount of disk writing latency. When clients write to
the cluster, OneFS temporarily writes the data to an NVRAM-based cache on the
initiator node, instead of immediately writing to disk. OneFS can then flush these
cached writes to disk at a later, more convenient time. Additionally, these writes are
also mirrored to participant node logfiles to satisfy the file’s protection requirement.
Therefore, in the event of a cluster split or unexpected node outage, uncommitted
cached writes are fully protected.
The write cache operates as follows:
• An NFS client sends Node 1 a write request for a file with N+2 protection.
• Node 1 accepts the writes into its NVRAM write cache (fast path) and then mirrors
the writes to participant nodes’ logfiles for protection.
• Write acknowledgements are returned to the NFS client immediately and as such,
write to disk latency is avoided.
• As Node 1’s write cache fills, it is periodically flushed and writes are committed to
disk via the two phase commit process (described above) with the appropriate
parity protection applied (N+2).
• The write cache and participant node logfiles are cleared and available to accept
new writes.

File reads
In an Isilon cluster, data, metadata and inodes are all distributed on multiple nodes,
and even across multiple drives within nodes. When reading or writing to the cluster,
the node a client attaches to acts as the “captain” for the operation.
In a read operation, the “captain” node gathers all of the data from the various nodes
in the cluster and presents it in a cohesive way to the requestor.
Due to the use of relatively less-expensive industry standard hardware, the Isilon
cluster provides a high ratio of cache to disk (multiple GB per node) that is
dynamically allocated for read and write operations as needed. This cache is unified
and coherent across all nodes in the cluster, allowing a user on one node to benefit
from I/O already transacted on another node. OneFS stores only distinct data on each
node. The node’s RAM is used as a “level 2” (L2) cache of such data. These distinct,
cached blocks can be accessed across the InfiniBand backplane very quickly. In this
way, the same data is never mirrored across multiple nodes; this allows for the RAM
cache to be very large and yet very efficient, which optimizes performance greatly. As
the cluster grows larger, the cache benefit increases. For this reason, the amount of


I/O to disk on an Isilon cluster is generally substantially lower than it is on traditional
platforms, allowing for reduced latencies and a better user experience.
For files marked with an access pattern of concurrent or streaming, OneFS can take
advantage of pre-fetching of data based on heuristics used by the Isilon SmartRead
component. SmartRead can create a data “pipeline” from L2 cache, prefetching into a
local “L1” cache on the “captain” node. This greatly improves sequential-read
performance across all protocols, and means that reads come directly from RAM
within milliseconds. For high-sequential cases, SmartRead can very aggressively
prefetch ahead, allowing reads or writes of individual files at very high data rates.

Figure 7: A File Read in a 3-node Isilon Cluster

Figure 7 illustrates how SmartRead reads a sequentially-accessed, non-cached file
that is requested by a client attached to Node1 in a 3-node cluster.
1. Node1 reads metadata to identify where all the blocks of file data exist.
2. Node1 also checks its L1 cache to see if it has the file data being requested.
3. Node1 builds a read pipeline, sending concurrent requests to all nodes that have a
piece of file data to retrieve that file data from disk.
4. Each node pulls the blocks of file data from disk into their L2 cache, and transmits
the file data to Node1.
5. Node1 records the incoming data to L1 cache, simultaneously serving the file to
the client. Meanwhile, the pre-fetching process continues.
6. For highly sequential cases, data in L1 cache may be optionally “dropped behind”
to free RAM for other L1 or L2 cache demands.
SmartRead’s intelligent caching allows for very high read performance with high levels
of concurrent access. Importantly, it is faster for Node1 to get file data from the
cache of Node2 (over the low-latency cluster interconnect) than to access its own
local disk. SmartRead’s algorithms control how aggressive the pre-fetching is


(disabling pre-fetch for random-access cases) and how long data stays in the cache,
and optimizes where data is cached.

Locks and concurrency
OneFS has a fully distributed lock manager that marshals locks on data across all
nodes in a storage cluster. The locking manager is highly extensible, and allows for
multiple lock “personalities” to support both file system locks as well as cluster-
coherent protocol-level locks such as SMB share mode locks or NFS advisory-mode
locks. OneFS also has support for delegated locks such as CIFS oplocks and NFSv4
delegations.
Every node in a cluster is a coordinator for locking resources and a coordinator is
assigned to lockable resources based upon an advanced hashing algorithm. The way
the algorithm is designed is that the coordinator almost always ends up on a different
node than the initiator of the request. When a lock is requested for a file, it could be a
shared lock (allowing multiple users to share the lock simultaneously, usually for
reads) or an exclusive lock (allowing one user at any given moment, typically for
writes).
Figure 8 below illustrates an example of how threads from different nodes could
request a lock from the coordinator.
1. Node 2 is designated to be the coordinator of these resources.
2. Thread 1 from Node 4 and thread 2 from Node 3 request a shared lock on a file
from Node 2 at the same time.
3. Node 2 checks if an exclusive lock exists for the requested file.
4. If no exclusive locks exist, Node 2 grants thread 1 from Node 4 and thread 2 from
Node 3 shared locks on the requested file.
5. Node 3 and Node 4 are now performing a read on the requested file.
6. Thread 3 from Node 1 requests an exclusive lock for the same file as being read
by Node 3 and Node 4.
7. Node 2 checks with Node 3 and Node 4 if the shared locks can be reclaimed.
8. Node 3 and Node 4 are still reading so Node 2 asks thread 3 from Node 1 to wait
for a brief instant.
9. Thread 3 from Node 1 blocks until the exclusive lock is granted by Node 2 and
then completes the write operation.


Figure 8: Distributed Lock Manager

Multi-threaded IO
With the growing use of large NFS datastores for server virtualization and enterprise
application support comes the need for high throughput and low latency to large files.
To accommodate this, OneFS Multi-writer supports multiple threads concurrently
writing to individual files.
In the above example, concurrent write access to a large file can become limited by
the exclusive locking mechanism, applied at the whole file level. In order to avoid this
potential bottleneck, OneFS Multi-writer provides more granular write locking by
subdiving the file into separate regions and granting exclusive write locks to individual
regions, as opposed to the entire file. As such, multiple clients can simultaneously
write to different portions of the same file.


Figure 9: Multi-threaded IO Writer

Data protection
Power loss
A file system journal, which stores information about changes to the file system, is
designed to enable fast, consistent recoveries after system failures or crashes, such
as power loss. The file system replays the journal entries after a node or cluster
recovers from a power loss or other outage. Without a journal, a file system would
need to examine and review every potential change individually after a failure (an
“fsck” or “chkdsk” operation); in a large file system, this operation can take a long
time.
OneFS is a journaled file system in which each node contains a battery-backed
NVRAM card used for journaling. The NVRAM card battery charge lasts many days
without requiring a recharge. When a node boots up, it checks its journal and
selectively replays transactions to disk where the journaling system deems it
necessary.
OneFS will mount only if it can guarantee that all transactions not already in the
system have been recorded. For example, if proper shutdown procedures were not
followed, and the NVRAM battery discharged, transactions might have been lost; to
prevent any potential problems, the node will not mount the file system.

Hardware failures and quorum
In order for the cluster to properly function and accept data writes, a quorum of

cluster with 𝑥 nodes must have ⌊𝑥2⁄⌋+1 nodes online in order to allow writes. For
nodes must be active and responding. A quorum is defined as a simple majority: a

example, in a seven-node cluster, four nodes would be required for a quorum. If a


node or group of nodes is up and responsive, but is not a member of a quorum, it
runs in a read-only state.
The Isilon system uses a quorum to prevent “split-brain” conditions that can be
introduced if the cluster should temporarily split into two clusters. By following the
quorum rule, the architecture guarantees that regardless of how many nodes fail or
come back online, if a write takes place, it can be made consistent with any previous
writes that have ever taken place. The quorum also dictates the number of nodes

protection-level of 𝑁+𝑀, at least 2𝑀+1 nodes must be in the cluster. For example, a
required in order to move to a given data protection level. For a erasure-code-based

minimum of seven nodes is required for an N+3 configuration; this allows for a
simultaneous loss of three nodes while still maintaining a quorum of four nodes for
the cluster to remain operational.

Hardware failures—add/remove nodes
A system called the group management protocol enables global knowledge of the
cluster state at all times, and guarantees a consistent view across the entire cluster of
the state of all other nodes. If one or more nodes become unreachable over the
cluster interconnect, the group is “split” or removed from the cluster. All nodes
resolve to a new consistent view of their cluster. (Think of this as if the cluster were
splitting into two separate groups of nodes, though note that only one group can have
quorum.) While in this split state, all data in the file system is reachable and, for the
side maintaining quorum, modifiable. Any data stored on the “down” device is rebuilt
using the redundancy stored in the cluster.
If the node becomes reachable again, a “merge” or add occurs, bringing node(s) back
into the cluster. (The two groups merge back into one.) The node can rejoin the
cluster without being rebuilt and reconfigured. This is unlike RAID arrays, which
require drives to be rebuilt. AutoBalance may restripe some files to increase
efficiency, if some of their protection groups were overwritten and transformed to
narrower protection groups during the split.
OneFS also includes a process called Collect that acts as an orphan collector. When a
cluster splits during a write operation, some blocks that were allocated for the file
may need to be re-allocated on the quorum side. This will “orphan” allocated blocks
on the non-quorum side. When the cluster re-merges, Collect will locate these
orphaned blocks through a parallelized mark-and-sweep scan, and reclaim them as
free space for the cluster.

Scalable rebuild
OneFS does not rely on hardware RAID either for data allocation, or for reconstruction
of data after failures. Instead OneFS manages protection of file data directly, and
when a failure occurs, it rebuilds data in a parallelized fashion. OneFS is able to
determine which files are affected by a failure in constant time, by reading inode data
linearly directly off disk. The set of affected files are assigned to a set of worker
threads that are distributed among the cluster nodes by the job engine. The worker
nodes repair the files in parallel. This implies that as cluster size increases, the time
to rebuild from failures decreases. This has an enormous efficiency advantage in
maintaining the resiliency of clusters as their size increases.


Virtual hot spare
Most traditional storage systems based on RAID require the provisioning of one or
more “hot spare” drives to allow independent recovery of failed drives. The hot spare
drive replaces the failed drive in a RAID set. If these hot spares are not themselves
replaced before more failures appear, the system risks a catastrophic data loss.
OneFS avoids the use of hot spare drives, and simply borrows from the available free
space in the system in order to recover from failures; this technique is called virtual
hot spare. In doing so, it allows the cluster to be fully self-healing, without human
intervention. The administrator can create a virtual hot spare reserve, allowing for a
guarantee that the system can self-heal despite ongoing writes by users.

N + M data protection
The Isilon cluster is designed to tolerate one or more simultaneous component
failures without preventing the cluster from serving data. The Isilon system can use
either a Reed-Solomon error correction (N+M protection) system, or a mirroring
system for files. Data protection is applied at the file-level, and not the system-level,
enabling the system to focus on recovering only those files that are compromised by
a failure rather than having to check and repair the entire fileset. Metadata and
inodes are protected at at least the level of protection as the data they reference.
Metadata and inodes are always protected by mirroring, rather than Reed-Solomon
coding.
Because all data, metadata, and parity information is distributed across the nodes of
the cluster, the Isilon cluster does not require a dedicated parity node or drive, or a
dedicated device or set of devices to manage metadata. This ensures that no one
node can become a single point of failure. All nodes share equally in the tasks to be
performed, providing perfect symmetry and load-balancing in a peer-to-peer
architecture.
The Isilon system provides several levels of configurable data protection settings,
which you can modify at any time without needing to take the cluster or file system
offline.

, where 𝑁>𝑀 and 𝑀≥𝑏. The values 𝑁 and 𝑀 represent,
𝑁+𝑀
For a file protected with erasure codes, we say that each of its protection groups is
𝑏
protected at a level of

protection group. The value of 𝑏 relates to the number of data stripes used to lay out
respectively, the number of drives used for data and for erasure codes within the

where 𝑏=1, implying that a protection group incorporates 𝑁 drives worth of data; 𝑀
that protection group, and is covered below. A common and easily-understood case is

should be laid out over exactly one stripe across a set of nodes. This implies that 𝑀
drives worth of redundancy, stored in erasure codes; and that the protection group

availability. The 𝑀 erasure code members are computed from the 𝑁 data members.
members of the protection group can fail simultaneously and still provide 100% data

The figure below shows the case for a regular 4+2 protection group (𝑁=4,M=2,𝑏=1).
Because OneFS stripes files across nodes, this implies that files striped at 𝑁+𝑀 can
withstand 𝑀 simultaneous node failures without loss of availability. OneFS therefore
provides resiliency across any type of failure, whether it be to a drive, a node, or a
component within a node (say, a card). Furthermore, a node counts as a single
failure, regardless of the number or type of components that fail within it. Therefore,


if five drives fail in a node, it only counts as a single failure for the purposes of 𝑁+𝑀

OneFS can uniquely provide a variable level of 𝑀, up to four, providing for quadruple-
protection.

failure protection. This goes far beyond the maximum level of RAID commonly in use

storage increases geometrically with this amount of redundancy, 𝑁+4 protection can
today, which is the double-failure protection of RAID-6. Because the reliability of the

be hundreds or thousands of times more reliable than traditional RAID-6. This added
protection means that large SATA drives such as 3 and 4 TB can be added with
confidence.

Figure 10: Data and Parity in N + M Protect

Smaller clusters can be protected with 𝑁+1 protection, but this implies that while a
single drive or node could be recovered, two drives to two different nodes could not.
Drive failures are orders of magnitude more likely than node failures. For clusters with
large drives, it is desirable to provide protection for multiple drive failures, though

efficiently on disk by using a value of 𝑏>1.
single-node recoverability is acceptable. Fortunately, this can be provided very

node redundancy, we can set 𝑀=𝑏=2. Instead of creating protection groups of 𝑁+𝑀
To provide for a situation where we wish to have double-disk redundancy and single-

members, we build up “double-length” protection groups of size 𝑁′+𝑀 where
𝑁′=2𝑁+𝑀. These double-length protection groups will “wrap” once over the same set
of nodes, as they are laid out. Clearly, since each protection group contains exactly
two disks worth of redundancy (𝑀=2), this mechanism will allow for the double-drive

protection group, but again we are safe because 𝑀=2.
failure that we are seeking. When a node fails, it causes two erasures in the

𝑀
Most important for small clusters, this method of striping is highly efficient, with an
𝑏(𝑁+𝑀)
failure protection, were we to use 𝑁=3, 𝑀=2 and 𝑏=1, we would obtain a 3+2
on-disk efficiency of 1− . For example, on a cluster of five nodes with double-

but with each protection group laid out over 𝑏=2 stripes, we could obtain 1−
2
protection group with an efficiency of 1−2/5 or 60%. Using the same 5-node cluster
2(3+2)
or


80% efficiency on disk, retaining our double-drive failure protection and sacrificing

OneFS supports erasure code protection levels of N+1, N+2, N+3, and N+4 (all 𝑏=1),
only double-node failure protection.

as well as N+2:1 (double-drive and single-node tolerant, 𝑏=2) and N+3:1 (triple-
drive and single-node tolerant, 𝑏=3), as well as mirroring levels between 2x
(mirrored) and 8x (eight-times mirrored). Protection levels can be applied to
individual files, directories and their contents, or the entire system.
OneFS enables an administrator to modify the protection policy in real time, while
clients are attached and are reading and writing data. Note that increasing a cluster’s
protection level may increase the amount of space consumed by the data on the
cluster.

Figure 11: OneFS Hybrid Parity Protection Schemes (N+M:x)

Automatic partitioning
Data tiering and management in OneFS is handled by the SmartPools framework.
From a data protection and layout efficiency point of view, SmartPools facilitates the
subdivision of large numbers of high-capacity, homogeneous nodes into smaller, more
Mean Time to Data Loss (MTTDL)-friendly disk pools. For example, an 80-node
nearline cluster would typically run at a +4 protection level. However, partitioning it
into four, twenty node disk pools would allow each pool to run at +2:1, thereby
lowering the protection overhead and improving space utilization without any net
increase in management overhead.
In keeping with the goal of storage management simplicity, OneFS will automatically
calculate and partition the cluster into pools of disks, or ‘node pools’, which are
optimized for both MTTDL and efficient space utilization. This means that protection
level decisions, such as the 80-node cluster example above, are not left to the
customer - unless desired.


With Automatic Provisioning, every set of equivalent node hardware is automatically
divided into node pools comprising up to twenty nodes and six drives per node. These
node pools are protected by default at +2:1, and multiple pools can then be combined
into logical tiers and managed with SmartPools file pool policies. By subdividing a
node’s disks into multiple, separately protected pools, nodes are significantly more
resilient to multiple disk failures than previously possible.

Figure 12: Automatic Partioning with SmartPools

Supported protocols
Clients with adequate credentials and privileges can create, modify, and read data
using one of the standard supported methods for communicating with the cluster:
• NFS (Network File System
• SMB/CIFS (Server Message Block/Common Internet File System)
• FTP (File Transfer Protocol)
• HTTP (Hypertext Transfer Protocol)
• iSCSI (Internet Small Computer System Interface)
• HDFS (Hadoop Distributed File System)
• REST API (Representational State Transfer Application Programming Interface)
By default, only the SMB/CIFS and NFS protocols are enabled in the Isilon cluster.
The root system for all file system data in the cluster is ifs (the Isilon OneFS file
system). The SMB/CIFS protocol has an ifs share, and the NFS protocol has an /ifs
export.
Note that data is common between all protocols, so changes made to file content
using one method are instantly viewable in all others.


Dynamic scale / scale on demand
Performance & capacity
In contrast to traditional storage systems that must “scale up” when additional
performance or capacity is needed, OneFS enables an Isilon storage system to “scale
out,” seamlessly increasing the existing file system or volume into petabytes of
capacity while increasing performance in tandem in a linear fashion.
Adding capacity and performance capabilities to an Isilon cluster is significantly easier
than with other storage systems—requiring only three simple steps for the storage
administrator: adding another node into the rack, attaching the node to the
InfiniBand network, and instructing the cluster to add the additional node. The new
node provides additional capacity and performance since each node includes CPU,
memory, cache, network, NVRAM and I/O control pathways.
The AutoBalance feature of OneFS will automatically move data across the InfiniBand
network in an automatic, coherent manner so existing data that resides on the cluster
moves onto this new storage node. This automatic rebalancing ensures the new node
will not become a hot spot for new data and that existing data is able to gain the
benefits of a more powerful storage system. The AutoBalance feature of OneFS is also
completely transparent to the end user and can be adjusted to minimize impact on
high-performance workloads. This capability alone allows OneFS to scale
transparently, on-the-fly, from 18TB up to 15.5PB with no added management time
for the administrator, nor increased complexity within the storage system.
A large-scale storage system must provide the performance required for a variety of
workflows, whether they be sequential, concurrent, or random. Different workflows
will exist between applications and within individual applications. OneFS provides for
all of these needs simultaneously with intelligent software. More importantly, with
OneFS (see Figure 10), throughput and IOPS scale linearly with the number of nodes
present in a single system. Due to balanced data distribution, automatic rebalancing
and distributed processing, OneFS is able to leverage additional CPUs, network ports,
and memory as the system scales.


Figure 13: OneFS Linear Scalability

Interfaces
Administrators can use multiple interfaces to administer an Isilon storage cluster in
their environments:
• Web Administration User Interface (“WebUI”)
• Command Line Interface via SSH network access or RS232 serial connection
• LCD Panel on the nodes themselves for simple add/remove functions
• RESTful Platform API for programmatic control of cluster configuration and
management.

Authentication & access control
Authentication services offer a layer of security by verifying users’ credentials before
allowing them to access and modify files. OneFS supports four methods for
authenticating users:
• Active Directory (AD)
• LDAP (Lightweight Directory Access Protocol)
• NIS (Network Information Service)
• Local users & Groups
OneFS supports the use of more than one authentication type. However, it is
recommended that you fully understand the interactions between authentication
types before enabling multiple methods on the cluster. Refer to the product
documentation for detailed information about how to properly configure multiple
authentication modes.


Active Directory
Active Directory, a Microsoft implementation of LDAP, is a directory service that can
store information about the network resources. While Active Directory can serve
many functions, the primary reason for joining the cluster to the domain is to perform
user and group authentication.
You can configure and manage a cluster’s Active Directory settings from the Web
Administration interface or the command-line interface; however, it is recommended
that you use Web Administration whenever possible.
Each node in the cluster shares the same Active Directory machine account making it
very easy to administer and manage.

LDAP
The Lightweight Directory Access Protocol (LDAP) is a networking protocol used for
defining, querying, and modifying services and resources. A primary advantage of
LDAP is the open nature of the directory services and the ability to use LDAP across
many platforms. The Isilon clustered storage system can use LDAP to authenticate
users and groups in order to grant them access to the cluster.

NIS
The Network Information Service (NIS), designed by Sun Microsystems, is a directory
services protocol that can be used by the Isilon system to authenticate users and
groups when accessing the cluster. NIS, sometimes referred to as Yellow Pages (YP),
is different from NIS+, which the Isilon cluster does not support.

Local users
The Isilon clustered storage system supports local user and group authentication. You
can create local user and group accounts directly on the cluster, using the WebAdmin
interface. Local authentication can be useful when directory services—Active
Directory, LDAP, or NIS—are not used, or when a specific user or application needs to
access the cluster.

Access zones
Access zones provide a method to logically partition cluster access and allocate
resources to self-contained units, thereby providing a shared tenant environment. To
facilitate this, Access Zones tie together the three core external access components:
• Cluster network configuration
• File protocol access
• Authentication
As such, Isilon SmartConnectTM zones are associated with a set of SMB/CIFS shares
and one or more authentication providers for access control. And overlapping shares
are permitted, allowing the centralized management of a single home directory
namespace, but provisioned and secured for multiple tenants. This is particularly
useful for enterprise environments where multiple separate business units are served
by a central IT department. Another example is during a server consolidation


initiative, when merging multiple Windows file servers that are joined to separate, un-
trusted, Active Directory forests.
With Access Zones, the built-in System access zone includes an instance of each
supported authentication provider, all available SMB shares, and all available NFS
exports by default.
These authentication providers can include multiple instances of Microsoft Active
Directory, LDAP, NIS, and local user or group databases.

Roles Based Administration
Roles Based Administration is a cluster management roles based access control
system (RBAC) that divides up the powers of the “root” and “administrator” users into
more granular privileges, and allows assignment of these to specific roles. These roles
can then be granted to other non-privileged users. For example, data center
operations staff can be assigned read-only rights to the entire cluster, allowing full
monitoring access but no configuration changes to be made. OneFS provides a
collection of built-in roles, including audit, system & security administrator, plus the
ability to create custom defined roles. Roles Based Administration is integrated with
the OneFS command line interface, WebUI and Platform API.

Software upgrade
Upgrading to the latest version of OneFS allows you to take advantage of any new
features, fixes and functionality on the Isilon Cluster. Clusters can be upgraded using
two methods: Simultaneous or Rolling Upgrade

Simultaneous upgrade
A simultaneous upgrade installs the new operating system and reboots all nodes in
the cluster at the same time. A simultaneous upgrade requires a temporary, sub-2
minute, interruption of service during the upgrade process while the nodes are
restarted.

Rolling upgrade
A rolling upgrade individually upgrades and restarts each node in the cluster
sequentially. During a rolling upgrade, the cluster remains online and continues
serving data to clients with no interruption in service. A rolling upgrade can only be
performed within a OneFS code version family and not between OneFS major code
version revisions.

Performing the upgrade
Isilon highly recommends that prior to an upgrade, you run a pre-install verification
script. The script verifies that the configuration in your current installation of OneFS is
compatible with the version of OneFS that is intended for the upgrade. A patch that
contains the script is available from the Isilon Customer Support Center.
During an upgrade, a pre-installation upgrade check is also performed to ensure that
only supported configuration is permitted to upgrade. When an unsupported
configuration is found, the upgrade is stopped and instructions on troubleshooting the


issue are displayed. Proactively running the script before starting an upgrade helps to
avoid any interruption due to incompatible configuration.
Once the administrator has downloaded the upgrade package from the Isilon
Customer Support Center, they can either run the upgrade via the CLI or through the
Web Administration Interface. Verification on the upgrade can be done via either
interface by checking the health status of the entire cluster once the upgrade
completes successfully.

EMC Isilon data protection and management software
Isilon offers a comprehensive portfolio of data protection and management software
to address your needs:

Performance Maximize performance of your Isilon scale-out storage system with
InsightIQ™
Management innovative performance monitoring and reporting tools

Resource Implement a highly efficient, automated tiered storage strategy to
SmartPools™
Management optimize storage performance and costs

Assign and manage quotas that seamlessly partition and thin
Data
SmartQuotas™ provision storage into easily managed segments at the cluster,
Management
directory, sub-directory, user, and group levels

Enable client connection load balancing and dynamic NFS failover
SmartConnect™ Data Access and failback of client connections across storage nodes to
optimize use of cluster resources

Protect data efficiently and reliably with secure, near
instantaneous snapshots while incurring little to no performance
SnapshotIQ™ Data Protection
overhead. Speed recovery of critical data with near-immediate on-
demand snapshot restores.

Data
Isilon for vCenter Manage Isilon functions from vCenter.
Management

Replicate and distribute large, mission-critical data sets
asynchronously to multiple shared storage systems in multiple
SyncIQ™ Data Replication sites for reliable disaster recovery capability. Push-button failover
and failback simplicity to increase availability of mission-critical
data.

Protect your critical data against accidental, premature or
malicious alteration or deletion with our software-based approach
SmartLockTM Data Retention to Write Once Read Many (WORM) and meet stringent
compliance and governance needs such as SEC 17a-4
requirements.

Aspera for Isilon™ Content Delivery High-performance wide area file and content delivery.


Please refer to product documentation for details on all of the above Isilon software
products.

Conclusion
With OneFS, organizations and administrators can scale from 18TB to 15.5 PB within
a single file system, single volume, with a single point of administration. OneFS
delivers high-performance, high-throughput, or both, without adding management
complexity.
Next-generation data centers must be built for sustainable scalability. They will
harness the power of automation, leverage the commoditization of hardware, ensure
the full consumption of the network fabric, and provide maximum flexibility for
organizations intent on satisfying an ever-changing set of requirements.
OneFS is the next-generation file system designed to meet these challenges. OneFS
provides:
• Fully distributed single file system
• High-performance, fully symmetric cluster
• File striping across all nodes in a cluster
• Automated software to eliminate complexity
• Dynamic content balancing
• Flexible data protection
• High availability
• Web-based and command-line administration
OneFS is ideally suited for file-based and unstructured “Big Data” applications in
enterprise environments – including large-scale home directories, file shares,
archives, virtualization and business analytics – as well as a wide range of data-
intensive, high performance computing environments including energy exploration,
financial services, Internet and hosting services, business intelligence, engineering,
manufacturing, media & entertainment, bioinformatics, and scientific research.


About EMC Isilon
EMC Isilon is the global leader in scale-out NAS. We provide powerful yet simple
solutions for enterprises that want to manage their data, not their storage. Isilon
products are simple to install, manage and scale, at any size and, unlike traditional
enterprise storage, Isilon stays simple no matter how much storage is added, how
much performance is required, or how business needs change in the future. We’re
challenging enterprises to think differently about their storage, because when they
do, they’ll recognize there’s a better, simpler way. Learn what we mean at
www.isilon.com.
U.S. Patent Numbers 7,146,524; 7,346,720; 7,386,675. Other patents pending.

Contact EMC Isilon
www.isilon.com
505 1st Avenue South, Seattle, WA 98104
Toll-free: 877-2-ISILON | Phone: +1-206-315-7602
Fax: +1-206-315-7501 | Email: sales@isilon.com
© 2012 EMC. All rights reserved. Isilon, Isilon Systems, OneFS, and SyncIQ are
registered trademarks of Isilon Systems LLC. Isilon IQ, SmartConnect, AutoBalance,
FlexProtect, SmartCache, SmartPools, InsightIQ, and the Isilon logo are trademarks
of EMC.


White Paper: EMC Isilon OneFS — A Technical Overview

More Related Content

What's hot (20)

Viewers also liked (18)

Similar to White Paper: EMC Isilon OneFS — A Technical Overview (20)

More from EMC (20)

White Paper: EMC Isilon OneFS — A Technical Overview