Aims problems

The sample
problems that
are dealt in
IIT-JEE

 Introduction
 Equations of Motion of a Rigid Body
 Angular Momentum of a Rigid Body in Plane Motion
 Plane Motion of a Rigid Body: d’Alembert’s Principle
 Axioms of the Mechanics of Rigid Bodies
 Problems Involving the Motion of a Rigid Body
 Sample Problem 1
 Constrained Plane Motion
 Constrained Plane Motion: Noncentroidal Rotation
 Constrained Plane Motion:
Rolling Motion

• In this chapter and in Chapters 17 and 18, we will be concerned with the
kinetics of rigid bodies, i.e., relations between the forces acting on a rigid
body, the shape and mass of the body, and the motion produced.
• Results of this chapter will be restricted to:
- plane motion of rigid bodies, and
- rigid bodies consisting of plane slabs or bodies which are symmetrical
with respect to the reference plane.
• Our approach will be to consider rigid bodies as made of large numbers
of particles and to use the results of Chapter 14 for the motion of systems
of particles. Specifically,
GG HMamF 
  and
• D’Alembert’s principle is applied to prove that the external forces acting
on a rigid body are equivalent a vector
attached to the mass center and a couple of moment
am

.I

Consider a rigid body acted
upon by several external forces.
For the motion of the mass
center G of the body with respect
to the Newtonian frame Oxyz,
amF


Assume that the body is made
of a large number of particles.
For the motion of the body with
respect to the centroidal frame
Gx’y’z’,
GG HM 

System of external forces is
equipollent to the system
consisting of .and GHam 

• Consider a rigid slab in
plane motion.
• Angular momentum of the slab may be
computed by
 
  
 







I
mr
mrr
mvrH
ii
n
i
iii
n
i
iiiG









Δ
Δ
Δ
2
1
1
• After differentiation,


IIHG 
• Results are also valid for plane motion of
bodies which are symmetrical with respect
to the reference plane.
• Results are not valid for asymmetrical
bodies or three-dimensional motion.

IMamFamF Gyyxx  
• Motion of a rigid body in plane motion is
completely defined by the resultant and
moment resultant about G of the external
forces.
• The most general motion of a rigid body that
is symmetrical with respect to the reference
plane can be replaced by the sum of a
translation and a centroidal rotation.
• The external forces and the collective
effective forces of the slab particles are
equipollent (reduce to the same resultant and
moment resultant) and equivalent (have the
same effect on the body).
• d’Alembert’s Principle: The external forces
acting on a rigid body are equivalent to the
effective forces of the various particles
forming the body.

• The forces act at different points
on a rigid body but but have the same
magnitude, direction, and line of action.
FF

and
• The forces produce the same moment about
any point and are therefore, equipollent
external forces.
• This proves the principle of transmissibility
whereas it was previously stated as an
axiom.

• The fundamental relation between the
forces acting on a rigid body in plane
motion and the acceleration of its mass
center and the angular acceleration of
the body is illustrated in a free-body-
diagram equation.
• The techniques for solving problems of
static equilibrium may be applied to
solve problems of plane motion by
utilizing
- d’Alembert’s principle, or
- principle of dynamic equilibrium
• These techniques may also be applied
to problems involving plane motion of
connected rigid bodies by drawing a
free-body-diagram equation for each
body and solving the corresponding
equations of motion simultaneously.

At a forward speed of 30 ft/s, the
truck brakes were applied, causing
the wheels to stop rotating. It was
observed that the truck to skidded to
a stop in 20 ft.
Determine the magnitude of the
normal reaction and the friction
force at each wheel as the truck
skidded to a stop.
SOLUTION:
• Calculate the acceleration during
the skidding stop by assuming
uniform acceleration.
• Draw the free-body-diagram
equation expressing the equivalence
of the external and effective forces.
• Apply the three corresponding
scalar equations to solve for the
unknown normal wheel forces at
the front and rear and the
coefficient of friction between the
wheels and road surface.

SOLUTION:
• Calculate the acceleration during the skidding
stop by assuming uniform acceleration.
 
 ft202
s
ft
300
2
2
0
2
0
2
a
xxavv








s
ft
5.22a
• Draw a free-body-diagram equation expressing
the equivalence of the external and effective
forces.
• Apply the corresponding scalar equations.
0 WNN BA
   effyy FF
 
 
699.0
2.32
5.22




g
a
agWW
NN
amFF
k
k
BAk
BA



   effxx FF

• Apply the corresponding scalar equations.
     
WN
g
aW
a
g
W
WN
amNW
B
B
B
650.0
45
12
45
12
1
ft4ft12ft5















   effAA MM
WNWN BA 350.0
 WNN Arear 350.02
1
2
1  WNrear 175.0
  WNF rearkrear 175.0690.0 
WFrear 122.0
 WNN Vfront 650.02
1
2
1  WN front 325.0
  WNF frontkfront 325.0690.0 
WFfront 227.0.0

The thin plate of mass 8 kg is held in
place as shown.
Neglecting the mass of the links,
determine immediately after the wire
has been cut (a) the acceleration of
the plate, and (b) the force in each
link.
SOLUTION:
• Note that after the wire is cut, all
particles of the plate move along
parallel circular paths of radius 150
mm. The plate is in curvilinear
translation.
equation expressing the
equivalence of the external and
effective forces.
• Resolve into scalar component
equations parallel and
perpendicular to the path of the
mass center.
• Solve the component equations and
the moment equation for the
unknown acceleration and link
forces.

• Draw the free-body-diagram equation
expressing the equivalence of the external
and effective forces.
SOLUTION:
• Note that after the wire is cut, all particles
of the plate move along parallel circular
paths of radius 150 mm. The plate is in
curvilinear translation.
• Resolve the diagram equation into
components parallel and perpendicular to the
path of the mass center.
   efftt FF


30cos
30cos
mg
amW
   30cosm/s81.9 2
a
2
sm50.8a 60o

2
sm50.8a 60o
• Solve the component equations and the
moment equation for the unknown acceleration
and link forces.
 effGG MM  
     
      0mm10030cosmm25030sin
mm10030cosmm25030sin


DFDF
AEAE
FF
FF
AEDF
DFAE
FF
FF
1815.0
06.2114.38


   effnn FF
  2
sm81.9kg8619.0
030sin1815.0
030sin



AE
AEAE
DFAE
F
WFF
WFF
TFAE N9.47
 N9.471815.0DFF CFDF N70.8

A pulley weighing 12 lb and having a
radius of gyration of 8 in. is connected
to two blocks as shown.
Assuming no axle friction, determine
the angular acceleration of the pulley
and the acceleration of each block.
SOLUTION:
• Determine the direction of rotation
by evaluating the net moment on
the pulley due to the two blocks.
• Relate the acceleration of the
blocks to the angular acceleration
of the pulley.
equation expressing the
equivalence of the external and
effective forces on the complete
pulley plus blocks system.
• Solve the corresponding moment
equation for the pulley angular
acceleration.

SOLUTION:
• Determine the direction of rotation by evaluating the
net moment on the pulley due to the two blocks.
      lbin10in10lb5in6lb10  GM
rotation is counterclockwise.
• Relate the acceleration of the blocks to the
angular acceleration of the pulley.
 

ft12
10

 AA ra
 

ft12
6

 BB ra
2
2
2
22
sftlb1656.0
ft
12
8
sft32.2
lb12








 k
g
W
kmInote:

• Draw the free-body-diagram equation expressing the
equivalence of the external and effective forces on
the complete pulley and blocks system.
 
  2
12
6
2
12
10
2
sft
sft
sftlb1656.0





B
A
a
a
I
   effGG MM
         
               12
10
12
10
2.32
5
12
6
12
6
2.32
10
12
10
12
6
12
10
12
6
12
10
12
6
1656.0510
ftftftlb5ftlb10



 AABB amamI
• Solve the corresponding moment equation for the
pulley angular acceleration.
2
srad374.2
  2
12
10
srad2.374ft
 AA ra
2
sft978.1Aa
Then,
  2
12
6
srad2.374ft
 BB ra
2
sft187.1Ba

A cord is wrapped around a
homogeneous disk of mass 15 kg.
The cord is pulled upwards with a
force T = 180 N.
Determine: (a) the acceleration of
the center of the disk, (b) the
angular acceleration of the disk, and
(c) the acceleration of the cord.
SOLUTION:
of the external and effective forces
on the disk.
• Solve the three corresponding scalar
equilibrium equations for the
horizontal, vertical, and angular
accelerations of the disk.
• Determine the acceleration of the
cord by evaluating the tangential
acceleration of the point A on the
disk.

SOLUTION:
• Draw the free-body-diagram equation
expressing the equivalence of the external and
effective forces on the disk.
xam0 0xa
• Solve the three scalar equilibrium equations.
  
kg15
sm81.9kg15-N180 2




m
WT
a
amWT
y
y
2
sm19.2ya
 
 
  m5.0kg15
N18022
2
2
1


mr
T
mrITr


2
srad0.48

0xa 2
sm19.2ya
2
srad0.48
• Determine the acceleration of the cord by
evaluating the tangential acceleration of the point
A on the disk.
   
  22
srad48m5.0sm19.2 

tGAtAcord aaaa

2
sm2.26corda

A uniform sphere of mass m and
radius r is projected along a rough
horizontal surface with a linear
velocity v0. The coefficient of kinetic
friction between the sphere and the
surface is k.
Determine: (a) the time t1 at which
the sphere will start rolling without
sliding, and (b) the linear and angular
velocities of the sphere at time t1.
SOLUTION:
of the external and effective forces
on the sphere.
• Solve the three corresponding
scalar equilibrium equations for the
normal reaction from the surface
and the linear and angular
accelerations of the sphere.
• Apply the kinematic relations for
uniformly accelerated motion to
determine the time at which the
tangential velocity of the sphere at
the surface is zero, i.e., when the
sphere stops sliding.

SOLUTION:
• Draw the free-body-diagram equation expressing
the equivalence of external and effective forces
on the sphere.
• Solve the three scalar equilibrium equations.
0WN mgWN 


mg
amF
k ga k
   

2
3
2 mrrmg
IFr
k 

r
gk

2
5

NOTE: As long as the sphere both rotates and
slides, its linear and angular motions are
uniformly accelerated.

ga k
r
gk

2
5

• Apply the kinematic relations for uniformly
accelerated motion to determine the time at which the
tangential velocity of the sphere at the surface is zero,
i.e., when the sphere stops sliding.
 tgvtavv k 00
t
r
g
t k









2
5
00
At the instant t1 when the sphere stops sliding,
11 rv 
110
2
5
t
r
g
rgtv k
k 







 g
v
t
k
0
1
7
2




















g
v
r
g
t
r
g
k
kk


 0
11
7
2
2
5
2
5
r
v0
1
7
5








r
v
rrv 0
11
7
5
 07
5
1 vv 

• Most engineering applications involve
rigid bodies which are moving under
given constraints, e.g., cranks, connecting
rods, and non-slipping wheels.
• Constrained plane motion: motions with
definite relations between the
components of acceleration of the mass
center and the angular acceleration of the
body.
• Solution of a problem involving
constrained plane motion begins with a
kinematic analysis.
• e.g., given q, , and , find P, NA, and NB.
- kinematic analysis yields
- application of d’Alembert’s principle
yields P, NA, and NB.
.and yx aa

• Noncentroidal rotation: motion of a body is
constrained to rotate about a fixed axis that
does not pass through its mass center.
• The kinematic relations are used to eliminate
from equations derived from
d’Alembert’s principle or from the method of
dynamic equilibrium.
nt aa and
• Kinematic relation between the motion of the
mass center G and the motion of the body
about G, 2
 rara nt 

• For the geometric center of an
unbalanced disk,
raO 
The acceleration of the mass
center,
   nOGtOGO
OGOG
aaa
aaa




• For a balanced disk constrained to
roll without sliding,
q rarx 
• Rolling, no sliding:
NF s ra 
Rolling, sliding impending:
NF s ra 
Rotating and sliding:
NF k ra, independent

kg3
mm85
kg4



OB
E
E
m
k
m
The portion AOB of the mechanism
is actuated by gear D and at the
instant shown has a clockwise
angular velocity of 8 rad/s and a
counterclockwise angular
acceleration of 40 rad/s2.
Determine: a) tangential force
exerted by gear D, and b)
components of the reaction at shaft
O.
SOLUTION:
• Draw the free-body-equation for
AOB, expressing the equivalence
of the external and effective forces.
• Evaluate the external forces due to
the weights of gear E and arm OB
and the effective forces associated
with the angular velocity and
acceleration.
• Solve the three scalar equations
derived from the free-body-
equation for the tangential force at
A and the horizontal and vertical
components of reaction at shaft O.

rad/s8
2
srad40
kg3
mm85
kg4



OB
E
E
m
k
m
SOLUTION:
• Draw the free-body-equation for AOB.
• Evaluate the external forces due to the weights
of gear E and arm OB and the effective forces.
  
   N4.29sm81.9kg3
N2.39sm81.9kg4
2
2


OB
E
W
W
    
mN156.1
srad40m085.0kg4 222

  EEE kmI
       
N0.24
srad40m200.0kg3 2

 rmam OBtOBOB
       
N4.38
srad8m200.0kg3 22

 rmam OBnOBOB
      
mN600.1
srad40m.4000kg3 22
12
12
12
1

  LmI OBOB

N4.29
N2.39


OB
E
W
W
mN156.1 EI
  N0.24tOBOB am
  N4.38nOBOB am
mN600.1 OBI
• Solve the three scalar equations derived from the
free-body-equation for the tangential force at A
and the horizontal and vertical components of
reaction at O.
 effOO MM  
     
   mN600.1m200.0N0.24mN156.1
m200.0m120.0

  OBtOBOBE IamIF
N0.63F
 effxx FF  
  N0.24 tOBOBx amR
N0.24xR
 effyy FF  
 
N4.38N4.29N2.39N0.63 

y
OBOBOBEy
R
amWWFR
N0.24yR

A sphere of weight W is released
with no initial velocity and rolls
without slipping on the incline.
Determine: a) the minimum value of
the coefficient of friction, b) the
velocity of G after the sphere has
rolled 10 ft and c) the velocity of G
if the sphere were to move 10 ft
down a frictionless incline.
SOLUTION:
• Draw the free-body-equation for the
sphere, expressing the equivalence of
the external and effective forces.
• With the linear and angular
accelerations related, solve the three
scalar equations derived from the free-
body-equation for the angular
acceleration and the normal and
tangential reactions at C.
• Calculate the friction coefficient
required for the indicated tangential
reaction at C.
• Calculate the velocity after 10 ft of
uniformly accelerated motion.
• Assuming no friction, calculate the
linear acceleration down the incline
and the corresponding velocity after 10
ft.

ra 
SOLUTION:
• Draw the free-body-equation for the sphere,
effective forces.
• With the linear and angular accelerations related,
solve the three scalar equations derived from the
free-body-equation for the angular acceleration
and the normal and tangential reactions at C.
   effCC MM
   
   


q















2
2
5
2
5
2
sin
r
g
W
rr
g
W
mrrmr
IramrW
 
7
30sinsft2.325
7
30sin5
2




g
ra 
2
sft50.11a

• Solve the three scalar equations derived from the
free-body-equation for the angular acceleration
and the normal and tangential reactions at C.
r
g
7
sin5 q
 
2
sft50.11 ra
WWF
g
g
W
amFW
143.030sin
7
2
7
sin5
sin



q
q
  
effyy FF
WWN
WN
866.030cos
0cos

 q
• Calculate the friction coefficient required for the
indicated tangential reaction at C.
W
W
N
F
NF
s
s
866.0
143.0




165.0s

r
g
7
sin5 q
 
2
sft50.11 ra
• Calculate the velocity after 10 ft of uniformly
accelerated motion.
 
  ft10sft50.1120
2
2
0
2
0
2

 xxavv
sft17.15v

   effGG MM 00  I
• Assuming no friction, calculate the linear
acceleration and the corresponding velocity after
10 ft.
  22
sft1.1630sinsft2.32
sin








a
a
g
W
amW q
 
  ft10sft1.1620
2
2
0
2
0
2

 xxavv
sft94.17v


A cord is wrapped around the inner
hub of a wheel and pulled
horizontally with a force of 200 N.
The wheel has a mass of 50 kg and
a radius of gyration of 70 mm.
Knowing s = 0.20 and k = 0.15,
determine the acceleration of G and
the angular acceleration of the
wheel.
SOLUTION:
wheel, expressing the equivalence of
the external and effective forces.
• Assuming rolling without slipping and
therefore, related linear and angular
accelerations, solve the scalar equations
for the acceleration and the normal and
tangential reactions at the ground.
• Compare the required tangential
reaction to the maximum possible
friction force.
• If slipping occurs, calculate the kinetic
friction force and then solve the scalar
equations for the linear and angular
accelerations.

  
2
22
mkg245.0
m70.0kg50

 kmI
Assume rolling without
slipping,
 

m100.0
 ra
SOLUTION:
• Draw the free-body-equation for the wheel,.
• Assuming rolling without slipping, solve the scalar
equations for the acceleration and ground
reactions.
    
    
   22
2
22
sm074.1srad74.10m100.0
srad74.10
mkg245.0m100.0kg50mN0.8
m100.0m040.0N200




a
Iam



   effCC MM
  
N3.146
sm074.1kg50N200 2


F
amF
   N5.490sm074.1kg50
0
2


mgN
WN

N3.146F N5.490N
Without slipping,
• Compare the required tangential reaction to the
maximum possible friction force.
  N1.98N5.49020.0max  NF s
F > Fmax , rolling without slipping is impossible.
• Calculate the friction force with slipping and solve
the scalar equations for linear and angular
accelerations.
  N6.73N5.49015.0  NFF kk 
 akg50N6.73N200  2
sm53.2a
     
 
2
2
srad94.18
mkg245.0
m060.0.0N200m100.0N6.73





2
srad94.18

The extremities of a 4-ft rod
weighing 50 lb can move freely
and with no friction along two
straight tracks. The rod is
released with no velocity from
the position shown.
Determine: a) the angular
acceleration of the rod, and b)
the reactions at A and B.
SOLUTION:
• Based on the kinematics of the
constrained motion, express the
accelerations of A, B, and G in terms of
the angular acceleration.
rod, expressing the equivalence of the
external and effective forces.
• Solve the three corresponding scalar
equations for the angular acceleration
and the reactions at A and B.

SOLUTION:
• Based on the kinematics of the constrained motion,
express the accelerations of A, B, and G in terms of
the angular acceleration.
Express the acceleration of B as
ABAB aaa


With the corresponding vector triangle
and the law of signs yields
,4ABa
 90.446.5  BA aa
The acceleration of G is now obtained from
AGAG aaaa

 2where AGa
Resolving into x and y components,


732.160sin2
46.460cos246.5


y
x
a
a

• Draw the free-body-equation for the rod,
effective forces.
 
 
  


69.2732.1
2.32
50
93.646.4
2.32
50
07.2
sftlb07.2
ft4
sft32.2
lb50
12
1
2
2
2
2
12
1





y
x
am
am
I
mlI
• Solve the three corresponding scalar equations
for the angular acceleration and the reactions at
A and B.
        
2
srad30.2
07.2732.169.246.493.6732.150




   effEE MM
2
srad30.2
  
lb5.22
30.293.645sin


B
B
R
R
lb5.22BR

45o
  
effyy FF
    30.269.25045cos5.22 AR
lb9.27AR

Aims problems

More Related Content

What's hot (20)

Similar to Aims problems (20)

Recently uploaded (20)

Aims problems