01 route routing services

© 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
ROUTE v6 Chapter 1
1
Chapter 1:
Routing Services
CCNP ROUTE: Implementing IP Routing

Chapter 1
2© 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public
Chapter 1 Objectives
 Describe common enterprise traffic requirements and
network design models.
 Describe how to create a plan for implementing routing
services in an enterprise network.
 Review the fundamentals of routing and compare various
routing protocols.

Chapter 1
Complex
Enterprise
Network
Frameworks,
Architectures,
and Models

Chapter 1
Traffic Conditions in a Converged Network
 Modern networks must support various types of traffic:
• Voice and video traffic
• Voice applications traffic
• Mission-critical traffic
• Transactional traffic
• Network management traffic
• Routing protocol traffic
 This mix of traffic greatly impacts the network requirements
such as security and performance.
 To help enterprises, Cisco has developed the Intelligent
Information Network (IIN).

Chapter 1
Cisco Intelligent Information Network
 The Intelligent Information Network (IIN):
• Integrates networked resources and information assets.
• Extends intelligence across multiple products and infrastructure
layers.
• Actively participates in the delivery of services and applications.
 The IIN technology vision consists of 3 three phases in
which functionality can be added to the infrastructure as
required:
• Integrated transport
• Integrated services
• Integrated applications

Chapter 1
3 Phases of the IIN
 Phase 1: Integrated transport
• Integrates data, voice, and video transport into a single, standards-based,
modular network simplifying network management and generating enterprise-
wide efficiencies.
 Phase 2: Integrated services
• Integrated services help to unify common elements, such as storage and data
center server capacity.
• IT resources can now be pooled and shared, or virtualized, to address the
changing needs of the organization.
• Business continuity is also enhanced in the event of a local systems failure
because shared resources across the IIN can provide needed services.
 Phase 3: Integrated applications
• This phase focuses on making the network application-aware so that it can
optimize application performance and more efficiently deliver networked
applications to users.

Chapter 1
Cisco SONA Framework
 The Cisco Service-Oriented Network Architecture (SONA) is
an architectural framework to create a dynamic, flexible
architecture and provide operational efficiency through
standardization and virtualization.
• SONA provides guidance, best practices, and blueprints for
connecting network services and applications to enable business
solutions.
• In this framework, the network is the common element that connects
and enables all components of the IT infrastructure.
 SONA help enterprises achieve their goals by leveraging:
• The extensive Cisco product-line services
• The proven Cisco architectures
• The experience of Cisco and its partners

Chapter 1
Cisco SONA Framework Layers
The SONA framework outlines three layers:
Application Layer:
Interactive Services Layer:
Network Infrastructure Layer:

Chapter 1
SONA: Network Infrastructure Layer
 This layer provides
connectivity anywhere and
anytime.
 All the IT resources
(servers, storage, and
clients) are interconnected
across a converged network
foundation.
 This layer represents how
these resources exist in
different places in the
network (campus, branch, data
center, WAN, MAN and with the
teleworker).

Chapter 1
SONA: Interactive Services Layer
 Enables efficient allocation of
resources to applications and
business processes delivered
through the networked
infrastructure.
 Application and business
processes include:
• Voice and collaboration services
• Mobility services
• Security and identity services
• Storage services
• Computer services
• Application networking services
• Network infrastructure virtualization
• Services management
• Adaptive management services

Chapter 1
SONA: Application Layer
 This layer’s objective is to
meet business requirements
and achieve efficiencies by
leveraging the interactive
services layer.
 Includes business
applications and
collaboration applications
such as:
• Commercial applications
• Internally developed applications
• Software as a Services (SaaS)
• Composite Apps/SOA

Chapter 1
Updated SONA Framework
Cisco Systems has recently updated the SONA framework:
Cisco designs, tests, and validates sets of modular, connected
infrastructure elements organized by places in the network
(PINs).

Chapter 1
Updated SONA Framework

Chapter 1
Cisco Enterprise Architecture
The places in the network in the SONA Network Infrastructure Layer
have been identified as follows:

Chapter 1
The Cisco Enterprise Architecture

Chapter 1
Campus Architecture
Provides:
 High availability with a resilient
multilayer design and redundant
hardware and software features.
 Automatic procedures for
reconfiguring network paths
when failures occur.
 Multicast to provide optimized
bandwidth consumption.
 Quality of Service (QoS).
 Integrated security.
 Flexibility to add IP security
(IPsec) and MPLS VPNs,
identity and access
management, and VLANs to
compartmentalize access.

Chapter 1
Branch Architecture
 Provides head-office
applications and services, such
as security, Cisco IP
Communications, and advanced
application performance.
 Integrates security, switching,
network analysis, caching, and
converged voice and video
services into a series of
integrated services routers in
the branch.
 Enterprises can centrally
configure, monitor, and manage
devices that are located at
remote sites.

Chapter 1
Data Center Architecture
 Adaptive network architecture
that supports the requirements
for consolidation, business
continuance, and security.
 Redundant data centers provide
backup services using
synchronous and asynchronous
data and application replication.
 The network and devices offer
server and application load
balancing to maximize
performance.
 This solution allows the
enterprise to scale without major
changes to the infrastructure.

Chapter 1
Teleworker Architecture
 Also called the Enterprise
Branch-of-One, it allows
enterprises to deliver secure
voice and data services to
remote SOHO offices over a
broadband access service.
 Centralized management
minimizes the IT support costs.
 Campus security policies are
implemented using robust
integrated security and identity-
based networking services.
• Staff can securely log on to the
network over an always-on VPN
and gain access to authorized
applications and services.

Chapter 1
Cisco Hierarchical Network Model
 The three-layer hierarchical model is used extensively in
network design.
 The hierarchical model consists of the:
• Access layer
• Distribution layer
• Core layer
 It provides a modular framework that allows design flexibility
and facilitates implementation and troubleshooting.
• The hierarchical model is useful for smaller networks, but does not
scale well to today’s larger, more complex networks.

Chapter 1
Hierarchical Campus Model

Chapter 1
Hierarchical Model Applied to a WAN

Chapter 1
Enterprise Composite Network Model
 The Enterprise Composite Network Model divides the
network into three functional areas:
Enterprise Campus Enterprise Edge Service
Provider Edge

Chapter 1
Enterprise Composite Network Model
Building Access
Building Distribution
Core (Campus backbone)
Server Farm
Management
Edge
Distribution
E-Commerce ISP A
Corporate Internet
Remote Access
VPN
WAN Frame Relay
/ ATM
PSTN
ISP B
Provider Edge

Chapter 1
Modules in the Enterprise Campus
Building Access
Server Farm
Management
Edge
Distribution
E-Commerce ISP A
Corporate Internet
Remote Access
VPN
WAN Frame Relay
/ ATM
PSTN
ISP B
Provider Edge

Chapter 1
Modules in the Enterprise Edge
Building Access
Server Farm
Management
Edge
Distribution
E-Commerce ISP A
Corporate Internet
Remote Access
VPN
WAN Frame Relay
/ ATM
PSTN
ISP B
Provider Edge

Chapter 1
Modules in the Service Provider Edge
Building Access
Server Farm
Management
Edge
Distribution
E-Commerce ISP A
Corporate Internet
Remote Access
VPN
WAN Frame Relay
/ ATM
PSTN
ISP B
Provider Edge

Chapter 1
Creating,
Documenting,
and Executing an
Implementation
Plan

Chapter 1
Creating an Implementation Plan
 An effective, documented implementation plan is a result of
good processes and procedures during network design,
implementation, and performance testing.
 There are two approaches to implementing changes to a
network.
• Ad-hoc approach
• Structured approach

Chapter 1
Ad-hoc Approach
 The many tasks such as deploying new equipment,
connectivity, addressing, routing, and security are
implemented and configured as required without planning
any of the tasks.
 With such an approach, it is more likely that scalability
issues, suboptimal routing, and security issues can occur.
 A good implementation plan is required to avoid such
difficulties.

Chapter 1
Structured Approach
 Prior to implementing a change many considerations are
taken into account.
 The design and implementation plan are completed, and
may include a new topology, an IP addressing plan, a
solution to scalability issues, a link utilization upgrade,
remote network connectivity, and changes to other network
parameters.
 The design and implementation plan must meet both
technical and business requirements.
 All details are documented in the implementation plan prior
to the implementation.
• After successful implementation, the documentation is updated to
include the tools and resources used, and the implementation results.

Chapter 1
Models and Methodologies
 There are there are many models and methodologies used
in IT that define a lifecycle approach using various
processes to help provide high quality IT services.
• No need to reinvent the wheel.
 Examples of these models:
• The Cisco Lifecycle Services (PPDIOO) model
• IT Infrastructure Library (ITIL)
• The Fault, Configuration, Accounting, Performance, and Security
(FCAPS) model
• International Organization for Standardization (ISO)
• The Telecommunications Management Network (TMN) model
• Telecommunications Standardization Sector (ITU-T)

Chapter 1
Cisco Lifecycle Services (PPDIOO) Model
The Cisco Lifecycle Services approach defines six phases in the network
lifecycle and is referred to as the PPDIOO model:
Prepare OptimizePlan Design Implement Operate

Chapter 1
PPDIOO – Prepare, Plan, and Design
 The PPDIOO methodology begins with these three basic
steps:
• Step 1: Identify customer requirements
• Step 2: Characterize the existing network and sites
• Step 3: Design the network topology and solutions
 Once the design is defined, the implementation plan can be
executed.
Identify
customer
requirements
Design the
network
Characterize
existing
network
Prepare Plan Design

Chapter 1
PPDIOO – Implement, Operate, Optimize
 The next three steps include:
• Step 4: Plan the implementation:
• Step 5: Implement and verify the design:
• Step 6: Monitor and optionally redesign:
Plan the
implementation
Monitor / RedesignImplement and
Verify
Design Implement Operate / Optimize

Chapter 1
Implementation Plan documentation
 The implementation plan documentation should include the
following:
• Network information
• Tools required
• Resources required
• Implementation plan tasks
• Verification tasks
• Performance measurement and results
• Screen shots and photos, as appropriate
 The documentation creation process is not finished until the
end of the project, when the verification information is
added to it.

Chapter 1
Sample Implementation Plan
 Project contact list and statements of work, to define all of
the people involved and their commitments to the project
 Site and equipment location information and details of how
access to the premises is obtained
 Tools and resources required
 Assumptions made
 Tasks to be performed, including detailed descriptions
 Network staging plan

Chapter 1
Project Contact List (sample)
Cisco Project Team <Customer> Project Team
Project Manager:
Telephone:
Email:
Project Manager:
Telephone:
Email:
Project Engineer:
Telephone:
Email:
Project Engineer:
Telephone:
Email:
Design Engineer:
Telephone:
Email:
Design Engineer:
Telephone:
Email:
Account Manager:
Telephone:
Email:
Account Manager:
Telephone:
Email:
Systems Engineer:
Telephone:
Email:
Systems Engineer:
Telephone:
Email:

Chapter 1
Equipment Floor Plan (sample)
Location Details
Floor
Room
Suite
Position
Rack No.

Chapter 1
Tools Required (sample)
Item No. Item
1.
PC with Teraterm, 100BaseT interface, FTP Server
and TFTP client applications
2. Console port cable
3. Ethernet cable

Chapter 1
Implementation Task List (sample)
Step No. Task
1. Connect to the router
2. Verify the current installation and create backup file
3. Change IOS version (on all routers)
4. Update IP address configuration (on distribution routers)
5. Configure EIGRP routing protocol
6. Verify configuration and record the results

Chapter 1
IP Routing
Overview

Chapter 1
Routing
 This section addresses the ways in which routers learn
about networks and how routers can incorporate static and
dynamic routes.
 A router can be made aware of remote networks in two
ways:
• An administrator can manually configure the information (static
routing)
• The router can learn from other routers (dynamic routing).
 A routing table can contain both static and dynamically
recognized routes.

Chapter 1
Static Routes
 A static route can be used in the following circumstances:
• To have absolute control of routes used by the router.
• When a backup to a dynamically recognized route is necessary.
• When it is undesirable to have dynamic routing updates forwarded
across slow bandwidth links.
• To reach a stub network.

Chapter 1
Static Routing
 Configure a static route with the ip route command.
Router(config)#
ip route prefix mask address interface dhcp distance name
next-hop-name permanent track number tag tag
Parameter Description
prefix mask The IP network and subnet mask for the remote network to be entered into the IP routing table.
address The IP address of the next hop that can be used to reach the destination network.
interface The local router outbound interface to be used to reach the destination network.
dhcp (Optional) Enables a Dynamic Host Configuration Protocol (DHCP) server to assign a static route
to a default gateway (option 3).
distance (Optional) The administrative distance to be assigned to this route.
name next-hop-
name (Optional) Applies a name to the specified route.
permanent (Optional) Specifies that the route will not be removed from the routing table even if the interface
associated with the route goes down.
track number (Optional) Associates a track object with this route. Valid values for the number argument range
from 1 to 500.
tag tag (Optional) A value that can be used as a match value in route maps.

Chapter 1
Configuring a Default Static Route
 R2 is configured with a static route to the R1 LAN and a default static
route to the Internet.
 R1 is configured with a default static route.
R1(config)# ip route 0.0.0.0 0.0.0.0 10.1.1.1
R1(config)# exit
R1# show ip route
<output omitted>
Gateway of last resort is not set
C 172.16.1.0 is directly connected, FastEthernet0/0
C 10.1.1.0 is directly connected, Serial0/0/0
S* 0.0.0.0/0 [1/0] via 10.1.1.1
R1#
R2(config)# ip route 172.16.1.0 255.255.255.0 S0/0/0
R2(config)# ip route 0.0.0.0 0.0.0.0 192.168.1.1
Internet
S0/0/0
S0/0/0
Fa0/0Fa0/0
10.1.1.2
10.1.1.1
192.168.1.2 192.168.1.1
S0/0/1
R1 R2
172.16.1.0 /24 10.2.0.0 /16

Chapter 1
Dynamic Routing
 Dynamic routing (RIPv1, RIPv2, EIGRP, OSPF, and IS-IS) allows the
network to adjust to changes in the topology automatically,
without administrator involvement.
 The information exchanged by routers includes the metric
or cost to each destination (this value is sometimes called
the distance).
• Different routing protocols base their metric on different
measurements, including hop count, interface speed, or more-
complex metrics.

Chapter 1
On-Demand Routing
 Static routes must be manually configured and updated
when the network topology changes.
 Dynamic routing protocols use network bandwidth and
router resources.
• Resource usage of dynamic routing can be considerable.
 A third option is to use the Cisco On-Demand Routing
(ODR) feature.
• ODR uses minimal overhead compared to a dynamic routing protocol
and requires less manual configuration than static routes.

Chapter 1
ODR
 ODR is applicable in a hub-and-spoke topology only.
 ODR works with the Cisco Discovery Protocol (CDP) to
carry network information between spokes and hub router.
 The hub router sends a default route to the spokes that
points back to itself and installs the stub networks reported
by ODR in its routing table.
• The hub router can then be configured to redistribute the ODR
learned routes into a dynamic routing protocol.

Chapter 1
Configuring ODR
 ODR is configured:
• On all routers, CDP must be enabled.
• On the hub router using the router odr global config command.
• On the stub routers, no IP routing protocol can be configured.
 ODR learned routes appear in the hub router routing table
with an entry of “o” and an administrative distance of 160.
• On each spoke router, the routing table contains only its connected
networks and a static default route injected by ODR from the hub.

Chapter 1
Configuring ODR
 R1 is a hub router while R2 and R3 are stub routers.
 All routers have CDP enabled.
R1(config)# router odr
R1(config)# exit
R1# show ip route
<output omitted>
172.16.0.0/16 is subnetted, 2 subnets
o 172.16.1.0/24 [160/1] via 10.1.1.2, 00:00:23, Serial0/0/1
o 172.16.2.0/24 [160/1] via 10.2.2.2, 00:00:03, Serial0/0/2
<output omitted>
R1#
S0/0/1
10.1.1.2
S0/0/2
R2 R1
172.16.1.0 /24
R3
172.16.2.0 /24
10.2.2.2
10.2.2.110.1.1.1

Chapter 1
Additional ODR commands.
 ODR can also be tuned with optional commands, including:
• a distribute list to filter routing updates
• timers basic router configuration command to adjust ODR timers
• cdp timer global configuration command to adjust the timers and
improve convergence time (default is every 60 seconds).

Chapter 1
Distance Vector Versus Link-State
 Distance vector:
• All the routers periodically send their routing tables (or a portion of
their tables) to only their neighboring routers.
• Routers use the received information to determine whether any
changes need to be made to their own routing table.
 Link-state routing protocol:
• Each router sends the state of its own interfaces (links) to all other
routers in an area only when there is a change.
• Each router uses the received information to recalculate the best path
to each network and then saves this information in its routing table.

Chapter 1
Classful Versus Classless Routing
 Classful Routing Protocol:
• Does not support VLSM.
• Routing updates sent do not include the subnet mask.
• Subnets are not advertised to a different major network.
• Discontiguous subnets are not visible to each other.
• RIP Version 1 (RIPv1) is a classful routing protocol.
 Classless Routing Protocol:
• Supports VLSM.
• Routing updates sent include the subnet mask.
• Subnets are advertised to a different major network.
• Discontiguous subnets are visible to each other.
• RIPv2, EIGRP, OSPF, IS-IS, and BGP are classless routing
protocols.

Chapter 1
Discontiguous Subnets - Classful Routing
 Classful routing protocols do not support discontiguous
networks.
 Discontiguous subnets are subnets of the same major
network that are separated by a different major network.
• For example, RIPv1 has been configured on all three routers.
• Routers R2 and R3 advertise 172.16.0.0 to R1.
• They cannot advertise the 172.16.1.0 /24 and 172.16.2.0 /24 subnets
across a different major network because RIPv1 is classful.
• R1 therefore receives routes about 172.16.0.0 /16 from two different
directions and it might make an incorrect routing decision.
Fa0/0
R2 R1
172.16.1.0 /24
R3
Fa0/0
172.16.2.0 /24
192.168.2.0 /24192.168.1.0 /24
RIPv1 update
172.16.0.0
RIPv1 update
172.16.0.0

Chapter 1
Discontiguous Subnets - Classless Routing
 Classless routing protocols support discontiguous networks.
• For example, RIPv2 has been configured on all three routers.
• Because of RIPv2, routers R2 and R3 can now advertise the
172.16.1.0 /24 and 172.16.2.0 /24 subnets across a different major
network.
• R1 therefore receives routes with valid subnet information and can
now make a correct routing decision.
Fa0/0
R2 R1
172.16.1.0 /24
R3
Fa0/0
172.16.2.0 /24
192.168.2.0 /24192.168.1.0 /24
RIPv2 update
172.16.1.0/24
RIPv2 update
172.16.2.0/24
R1 Routing Table:
 172.16.1.0/24
 172.16.2.0/24

Chapter 1
ip classless Command
 The behavior of a classful routing protocol changes when
the ip classless global config command is used.
 Classful protocols assume that if the router knows some of
the subnets of a classful network (e.g. 10.0.0.0), then it
must know all that network’s existing subnets.
• If a packet arrives for an unknown destination on the 10.0.0.0 subnet
and:
• ip classless is not enabled, the packet is dropped.
• ip classless is enabled, then the router will follow the best supernet
route or the default route.
 Since IOS release 12.0, ip classless is enabled by default and
should not be disabled.

Chapter 1
Automatic Route Summarization
 Classful routing automatically summarize to the classful
network boundary at major network boundaries.
 Classless routing protocols either do not automatically
summarize or automatically summarize but this feature can
be disabled.
• OSPF or IS-IS do not support automatic network summarization.
• RIPv2 and EIGRP perform automatic network summarization to
maintain backward compatibility with RIPv1 and IGRP.
• However, automatic summarization can be disabled in RIPv2 and
EIGRP by using the no auto-summary router config command.

Chapter 1
Characteristics of Routing Protocols
Characteristics RIPv1 RIPv2 EIGRP IS-IS OSPF BGP
Distance vector    
Link-state  
Classless     
VLSM support     
Automatic route
summarization


(can be disabled
using no auto-
summary)

(can be disabled
using no auto-
summary)

Manual route
summarization
    
Hierarchical
topology required
 
Size of network Small Small Large Large Large Very large
Metric Hops Hops
Composite
metric
Metric Cost Path attributes
Convergence time Slow Slow Very fast Fast Fast Slow

Chapter 1
Routing Protocol Specifics
Routing Protocol Protocol
Number
Port Number Admin Distance
RIP -- UDP 520 120
IGRP 9 -- 100
EIGRP 88 -- 90
Summary Routes – 5
Redistributed Routes – 170
OSPF 89 -- 110
IS-IS 124 -- 115
BGP -- TCP 179 eBGP – 20
iBGP – 200

Chapter 1
Routing Table Criteria
 The best route selected from various routing protocols for a
specific destination is chosen by considering the following
four criteria:
• Valid next-hop IP address.
• Administrative distance
• Metric
• Prefix

Chapter 1
Administrative Distance
 Cisco routers use a value called administrative distance to
select the best path when they learn of two or more routes
to the same destination with the same prefix from different
routing protocols.
 Administrative distance rates a routing protocol’s
believability.
 Cisco has assigned a default administrative distance value
to each routing protocol supported on its routers.
• Each routing protocol is prioritized in the order of most to least
believable.

Chapter 1
Administrative Distances
Route Source Default Distance Routing Table Entry
Connected interface 0 C
Static route out an interface 0 S
Static route to a next-hop address 1 S
EIGRP summary route 5 D
External BGP 20 B
Internal EIGRP 90 D
IGRP 100 I
OSPF 110 O
IS-IS 115 i
RIPv1, RIPv2 120 R
Exterior Gateway Protocol (EGP) 140 E
ODR 160 O
External EIGRP 170 D EX
Internal BGP 200 B
Unknown 255

Chapter 1
Floating Static Route
 Routers believe static routes over any dynamically learned
route.
 To change this default behavior and make a static route
appear in the routing table only when the primary route
goes away, create a floating static route.
• The administrative distance of the static route is configured to be
higher than the administrative distance of the primary route and it
“floats” above the primary route, until the primary route fails.
 To configure a static route use the ip route command
with the distance parameter.

Chapter 1
Configuring a Floating Static Route
 Create floating static routes on R1 and R2 that floats above the EIGRP
learned routes.
R1(config)# ip route 10.0.0.0 255.0.0.0 172.16.1.2 100
R1(config)# router eigrp 1
R1(config-router)# network 172.17.0.0
Internet
Fa0/0Fa0/0
192.168.1.0 /24
Backup link
R1 R2
172.17.0.0 /16 10.0.0.0 /8
EIGRP 1
Primary link
172.16.1.1 172.16.1.2
R2(config)# ip route 172.17.0.0 255.255.0.0 172.16.1.1 100
R2(config)# router eigrp 1

Chapter 1
Routing Within the ECNM
 Routing protocols are an integral part of any network.
• When designing a network routing protocol, selection and planning
are among the design decisions to be made.
 Although the best practice is to use one IP routing protocol
throughout the enterprise if possible, in some cases multiple
routing protocols might be required.

Chapter 1
Suggested Routing Protocols Used
Building Access
Server Farm
Edge
Distribution
RIPv2, OSPF, EIGRP, Static routes
OSPF, EIGRP, IS-IS and BGP
Between Building Access and
Building Distribution:
Between Building Distribution
and Core:

Chapter 1
Routing Within the ECNM
 The Enterprise Composite Network Model can assist in
determining where each routing protocol is implemented,
where the boundaries between protocols are, and how
traffic flows between them will be managed.

Chapter 1
Chapter 1 Summary
 Traffic in converged networks includes voice and video, voice applications,
mission-critical, transactional, routing protocol, and network management.
 The three phases of the Cisco IIN: integrated transport, integrated services, and
integrated applications.
 The three layers of the Cisco SONA architectural framework: networked
infrastructure, interactive services, application.
 The components of the Cisco Enterprise Architecture for integration of the entire
network: campus, data center, branches, teleworkers, and WAN.
 The traditional hierarchical network model with its three layers: core, distribution,
and access.
 The Cisco Enterprise Composite Network Model with its three functional areas
and their associated modules:
• Enterprise Campus: Building, Building Distribution, Core, Edge Distribution, Server Farm,
Management
• Enterprise Edge: E-commerce, Corporate Internet, VPN and Remote Access, WAN
• Service Provider Edge: ISP, PSTN, Frame Relay/ATM.

Chapter 1
Chapter 1 Summary (continued)
 The two approaches to implementing changes to a network: using an
ad-hoc approach or using a structured approach.
 Four models used in IT services lifecycles: Cisco Lifecycle Services
(PPDIOO), ITIL, FCAPS, and TMN.
 Creating an implementation plan, as part of the network Design phase,
that includes:
• Network information
• Tools required
• Resources required
• Implementation plan tasks
• Verification tasks
• Performance measurement and results}

Chapter 1
Chapter 1 Summary (continued)
 Static routing characteristics and configuration.
 Characteristics and configuration of ODR, which uses CDP to carry network information between
spoke (stub) routers and the hub router.
 Dynamic routing protocol characteristics, including:
• The metric, a value (such as path length) that routing protocols use to measure paths to a destination.
• Configuration, using the router protocol global configuration command.
• Distance vector routing, in which all the routers periodically send their routing tables (or a portion of their tables) to
only their neighboring routers.
• Link-state routing, in which each of the routers sends the state of its own interfaces (its links) to all other routers (or
to all routers in a part of the network, known as an area) only when there is a change.
• Hybrid routing, in which routers send only changed information when there is a change (similar to link-state
protocols) but only to neighboring routers (similar to distance vector protocols).
• Classful routing protocol updates, which do not include the subnet mask. Classful protocols do not support VLSM or
discontiguous subnets and must automatically summarize across the network boundary to the classful address.
• Classless routing protocol updates, which do include the subnet mask. Classless protocols do support VLSM and
discontiguous subnets, and do not have to summarize automatically across network boundaries.
 The process that Cisco routers use to populate their routing tables includes a valid next-hop IP
address, Administrative distance, metric, and prefix.

Chapter 1
 Lab 1-1 Tcl Script Reference and Demonstration
Chapter 1 Labs

Chapter 1

01 route routing services

More Related Content

What's hot (19)

Similar to 01 route routing services (20)

01 route routing services

Editor's Notes